9 best nitecore battery charger

Product description

Features:

Able to charge over twice as many types of batteries as its previous model

Automatic current selection chooses optimal current based on battery's capacity

Capable of setting the charging voltage of each bay individually

Active Current Distribution (ACD) technology ensures optimal dispersal of charging current amongst installed batteries

Automatically detects non-rechargeable batteries and notifies user

Overcharge protection automatically stops charging after 20 hours to prevent overheating

Reverse Polarity Protection prevents damage to both batteries and charger

Special charging setting specific for IMR batteries



Nitecore New i4 intellicharger

Specifications:

Input: AC 100-240V 50/60Hz 0.25A (Max) 10W, DC 9~12V 1A

Output Voltage: 4.35V ±1% / 4.2V ±1% / 3.7V ±1% / 1.48V ±1%

Output Current: 375mA x 4 / 500mA x 4 / 750mA x 2 / 1500mA x 1



Compatible with batteries:

Li-ion / IMR / LiFePO4: 26650, 26500, 25500, 22650, 22500, 21700, 20700, 18700, 18650, 18500, 18490, 18350, 17670, 17650, 17500, 17350, 16650, 16340 (RCR123A), 16500, 14650, 14500, 14430, 14350, 13650, 13500, 13450, 12650, 12500, 12340, 10500, 10440, 10350, 10340

Ni-MH / Ni-Cd: AA, AAA, AAAA, C, D



Dimensions:

Length - 5.51" (140 mm)

Width - 3.73" (94.7 mm)

Height - 1.45" (36.8 mm)

Weight: 7.12 oz (202 g)



EdisonBright BBX3 battery box and 2X EdisonBright AA to D battery converter spacers included. These allow use of rechargeable AA batteries in D battery equipment.



Batteries not included.

• New upgraded version equipped with AC and 12V cords capable of charging 4 batteries of different types simultaneously
• Most popular charger in market.
• Compatible with: Li-ion / IMR / LiFePO4: 26650, 26500, 25500, 22650, 22500, 21700, 20700, 18700, 18650, 18500, 18490, 18350, 17670, 17650, 17500, 17350, 16650, 16340 (RCR123A), 16500, 14650, 14500, 14430, 14350, 13650, 13500, 13450, 12650, 12500, 12340, 10500, 10440, 10350, 10340 ; Ni-MH / Ni-Cd: AA, AAA, AAAA, C, D
• Made from durable ABS (fire retardant / flame resistant)
• 12V DC Cable, 2X EdisonBright AA to D battery converter spacers & EdisonBright BBX3 battery box included. Spacers allow use of rechargeable AA batteries in D battery equipment.

User questions & answers

Question:	How can you tell when the battery is charged
Answer:	The green meter stops blinking above the battery.
Question:	does this package come with any batteries or just the charger
Answer:	Just the charger and accessories as shown. No batteries.
Question:	Is this the 2017 edition
Answer:	I don't know if this a 2017 edition or not but I have 3 different nitecore chargers and this is my least favorite.
Question:	How much of a drain is this on a car battery if using with the 12V car adapter? Any recommendations on other good smart chargers with 12V car adapters
Answer:	Specs indicate 10 watt draw about 1 amp at 12v DC - So it will depend on the amp hour rating of the battery, use it while driving will not see any troubles. Connect to a solar panel for free charging and no worries

• FAST AND EFFICIENT CHARGING- Reach a maximum total of 2000mA when using a 2A output USB power adapter. Connect a quick charge (QC) power adapter for high speed charging and reach a single slot max output of 3000mA.
• LCD DISPLAY- Reports key realtime information such as battery health, charging status and charging mode.
• INTELLIGENT CHARGING- Automatically selects appropriate charging current and voltage.
• BATTERY TYPES & SIZES - Compatible with various battery types (li-ion/imr/lifep04/ni-cd/ni-mh) and common battery sizes including (18650, 21700, 16340,14500 and more).
• PERFECT FOR TRAVEL AND EDC - This bundle includes a LumenTac battery organizer to keep you organized when you are on the go.

User questions & answers

Question:	Will it charge a button top
Answer:	Any Qualcomm charge 3 adapter
Question:	Can i charge protected 18650 and 21700 batteries in ums
Answer:	The UMS4 charger is cable of activating over-discharged Li-ion batteries or restoring over-discharged IMR batteries. Make sure you read the manual and follow the steps.
Question:	can I use oneplus 3 adapter - output is 5V/4A with this ? or it is too much
Answer:	If you are talking about primary CR123a then no. Primaries can never be recharged. If you're talking about RCR123a (aka 16340) then yes. As a test for fit, I put a primary CR123a (don't have any 16340's) and the sliding mechanism held the battery in place.
Question:	Does this have a “condition” feature to recondition batteries
Answer:	No, you should remove batteries when they are fully charged. The unit has built-in protection to prevent overcharging but why put it to the test continually? The risk of fire far exceeds the benefit of having a fully charged battery.
Question:	does this unit charge the CR123a batterys
Answer:	When all three lights cease completely the battery is charged. I usually just feel the top of the charger if it's cool then it's done.
Question:	If the charger stops charging when the batteries are fully charged, is it safe to leave one battery in the unit so that it doesn't discharge? Thanks
Answer:	Hi, Jason...that's a very perceptive question. I hadn't noticed that style plug when I ordered the charger. But no worries, the charger comes with a standard 120V two-prong plug. One other fact, the cord length is about 3 1/2 ft from plug end to charger. Charger works great...used mine again just today!
Question:	Since it is not clear from the sparse instructions, is charging complete when all three yellow lights cease flashing? or when they cease completely
Answer:	Compatible for most air vents: Firmly attaches onto both vertical and horizontal air vent blades. But not compatible with round vents.
Question:	What kind of wall charger comes with this? The picture shows a Euro style wall plug, is that what comes with this? Will I have to order a US style
Answer:	Yes,This is three combinations Universal Phone Holder,And the anti-Slip Clip with rubber pad lock the air vent firmly, Mount your phone securely and safely by using your car air vent.

Product features

Fast Charging -- Even Faster with a Compatible QC2.0+ USB Power Source

• Standard Mode: Reach a maximum 2000mA for one slot, 1000mA for two slots, or 500mA for four slots when paring with a standard 5V/2A USB source or adapter
• QC Mode: Reach a maximum total of 3000mA for one slot, 2000mA for two slots or 1000mA for four slots when pairing with a QC2.0+ USB power adapter
• (A USB charging cable is included. USB Adapter or QC Adapter is sold separately, depending on different bundle configuration)

Intelligent USB Charging with Rich Features

• Intelligent charging technology automatically detects and applies the appropriate charging current/voltage and allows users to manually adjust the charging current/voltage for specialized batteries.
• Supports multiple USB input sources including computer USB port, power adapter, solar panel and more.
• Anti-short Circuiting and Reverse Polarity Protection
• Overtime Charging Protection
• Check the battery health with the Automatic Battery Internal Resistance Detection

Product description

Nitecore Intellicharge i8 8-Bay Smart Charger



Features:

-Active current distribution

-Automatically detects power level of batteries

-Designed for optimal heat dissipation

-Supports USB output

-LED indicator lights

-Reverse polarity protection

-8 Independent bays



Specifications:

Input: AC 100-200V 50/60hz 0.6A(Max) 30W DC 12V 3A

Output Voltage: Battery: 4.2V/1.48V - USB 5V

Output Current: Battery: 1.5A x 2 - 1A x4 - 0.75A x 4 - 0.5A x 8



Compatible with:

Li-ion / IMR / LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 1345, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650

Ni-MH / Ni-Cd: AA, AAA, C, D



Dimensions:

Length - 4.61" (117 mm)

Width - 3.95" (101 mm)

Height - 5.30" (134.5 mm)

Weight: 17.22oz (488.2 g)



Bundle includes a EdisonBright BBX3 battery carry case

• 8 Independent bays; Active current distribution;
• Compatible with: Li-ion / IMR / LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 1345, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650, Ni-MH / Ni-Cd: AA, AAA, C, D
• Supports USB output (Use as a 2 port USB charger)
• LED indicator lights
• Bundle includes a EdisonBright BBX3 battery carry case

User questions & answers

Question:	Can this charge a single battery, or do they need to be in pairs
Answer:	the listing of batteries that is compatible with this charger is Compatible with: Li-ion/IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650,12550, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650,18700,20700,21700, 22500, 22650, 25500, 26500, 26650 Ni-MH (Ni-Cd): AA, AAA, C, D
Question:	Where can i buy the 12v charging cord for this battery charge
Answer:	Some of the 20700’s have a built in circuit, the ones that have that circuit are too long. If your 20700’s do not have that, they will charge just/fit just fine.
Question:	Will this work with 21700 flat top batteries
Answer:	Yes, the UMS4 is compatible with button top 21700.
Question:	So.....this chrager wont work to 20700 or 21700 batteries
Answer:	Yes.

Product description

Features

• Active Current Distribution (ACD) Technology
• Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteries
• Capable of charging four batteries simultaneously
• Automatically detects battery power status and displays charging progress
• Made from fire resistant, flame retardant PC material

Specifications:

Input Voltage: AC 100~240V 50/60Hz 0.25A (max) 10W DC 9~12V 1A

Output voltage: 4.35V±1% / 4.2V±1% / 3.7V±1% / 1.48V±1%

Output current: 1.5A x 1 / 0.75A x 2 / 0.5A x 2 / 0.375A x 4



Compatible with:

--Li-ion / IMR / LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500,18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650 --Ni-MH / NiCd: AA, AAA, AAAA, C, D



Weight: 202g



Safety Precautions:

• For use with Li-ion, IMR, LiFePO4, Ni-MH/Ni-Cd rechargeable batteries only
• Do not leave working charger unattended
• Do not attempt to charge primary cells such as Alkaline, Zinc-Carbon, Lithium, CR123A, CR2 or any other unsupported chemistry
• Never charge / discharge battery having evidence of leakage, swelling, damaged outer wrapper, color-change or distortion
• Do not touch hot surfaces. Batteries or device may become hot at full load or high power charging/discharging
• Remove all batteries and unplug charging unit from power source when not in use
• See Included User Manual for additional Safety Instructions

Warranty Locate verification code on package box and register at http://charger.nitecore.com/validation. You will receive a warranty service email response. If any problems are encountered during registration, contact manufacturer directly at http://www.nitecore.com/contactus/

• Twice the charging speed of the i4 charger, up to 1.5A. Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteries
• Optimized charging design for IMR batteries, with new IMR battery recovery feature
• Automatically detects battery power status and displays charging progress, and automatically stops charging when complete
• For use with Li-ion / IMR / LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500,18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650; Ni-MH / NiCd: AA, AAA, AAAA, C, D
• For use with Rechargeable batteries only. Do not attempt to charge primary cells such as Alkaline, Zinc-Carbon, Lithium, CR123A, CR2 or any other unsupported chemistry

User questions & answers

Question:	Will this product charge "Panasonic BK-3MCCA8BA eneloop AA New 2100 Cycle Ni-MH
Answer:	I purchased the Nitecore i4version 2014 a few months back and it works perfect on all NI-MH batteries and charges fairly quickly.This charger also does 1.4 volt NI-MH or NICd AA, AAA ,AAAA ,C and the newer solar batteries of 3.2 volts. Its a good charger, better than my oldRadio Shack battery charger that i have for 5 years. It's a keeper !
Question:	it says that it is compatible with NIMH C batteries... but the ports are too narrow for a typical C battery. so, what gives
Answer:	You should try again! D batteries don't fit, but C batteries do. They don't fit _well_, like 18mm batteries do, but you can get two C's in there. Just don't jostle it a lot.
Question:	Nitecore i4 charger can work for the 18650 flat top battery without pcb(eastshine e35u)? will they stop charging when finished
Answer:	Yes
Question:	Will this unit charge batteries rated at/for 5000 mAh
Answer:	despite what Kei Lau said protection has nothing to do with charging your battery. this will indeed charge 5000mAh batteries, however not many have that much capacity. 26650, 21700 etc. there are no 18650 over 3600mah

Product description

Nitecore UMS4 High-Quality 4-Way Superb Intelligent Speedy Li-Ion Charger with LCD Display 

One of the FASTEST charging fully USB powered Incredibly Smart Battery Chargers around!

An on the go Quick charge USB Universal battery charger can be plugged into anywhere, worldwide!

The Nitecore UMS4 is an intelligent, QC 2.0 compatible USB charger with four charging slots and LCD display. 

With the UMS4; Li-ion, Li-ion IMR, NiMH/NiCd and LiFePO4 batteries can be charged with ease. Nitecore UMS4 charger detects the battery type, determines the battery state, the charge status of the battery and automatically sets the correct charging method. 

The standard charging current is 500 mA. However, this can be increased manually, depending on the battery type, up to 2A and in QC mode up to 3A. 

Deep-discharged lithium-ion batteries can be reactivated in the UMS4 (please observe the instruction manual). 

Also comes with a practical LifeMods Battery Case to keep your cells organized and safe while on the go!

Technical details 

Input voltage: DC 5V/2A 9V/2A 18W (Max). 

Output voltage: 4.35V±1% / 4.2V±1% / 3.7V±1% / 1.48V±1% 

QC mode: 3,000mA*1 (MAX) | 2,000mA*2 (MAX) | 1,000mA*4 (MAX)

Standard mode: 500mAh*4 (MAX) | 1,000mA*2 (MAX) | 2,000mA*1 (MAX)

Compatible with the following battery types: 

Li-ion, IMR, LiFePO4: 10440, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 

18500, 18650, 18700, 20700, 21700, 22500, 25500, 26500, 26650, 26700 

Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D 

Dimensions: 152 mm x 73 mm x 40 mm. 

Weight: 157.7g (without cable)

• One of the Quickest USB Powered Universal Intelligent Battery Charger, allows for on the go worldwide portability
• Quick Charge 2.0 Integrated Max Single Slot Output of 3000mA Charging allows for incredibly fast charging speeds with the appropriate compatible adapter
• Automatic Detection of battery power level and automatic selection of the appropriate voltage and charging mode
• Li-Ion Battery Restoration and keep your batteries safe with an added battery case
• Li-Ion, IMR, LiFePO4: 10440, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 25500, 26500, 26650, 26700 Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D

User questions & answers

Question:	Will 2X 26650s and 2X 18650s fit in this charger at that same time
Answer:	Hello, Of course it is. Please register the product immediately on the nitecore website when receiving it. All nitecore products come with a 12 month warranty
Question:	Will this fully charge a 5000mah 21700 battery
Answer:	To answer this question yourself flip over the device and look at the yellow label where it shows Input. It shows that it accepts 5 voltes at 2 amps or 5V/2A for short hand. That means that any cell phone charger rated for 5V 2A will work this charger to its full potential. You may run into cell chargers that are adaptive and you will see their output as multiple voltages and amperage, this is ok as these chargers "talk" to the device and will select the appropriate voltage and amperage for you. I use a Samsung Fast charger that came with my Note 8 as it is capable of 9V 1.64A and 5V 2A which is the voltage we need. If you only have access to older 5V 1A chargers this is OK and will not damage your new battery charger it just simply will charger your batteries slower.
Question:	Hi. i have 2 questions
Answer:	It has 8 charging ports so it charges 8 batteries individually. So Yes it can.
Question:	What power adapter do i use? is there a specific one for fast charging that is approved to use with this? i thought one came in the box but i guess no
Answer:	Ships with it.

Product description

Features

Intelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt)

Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection)

Compatible with small capacity batteries

Automatically stops charging when complete

Features temperature monitoring to prevent overheating

Made from durable ABS (fire retardant / flame resistant)

Features reverse polarity protection

Designed for optimal heat dissipation

Certified by RoHS, CE, FCC and CEC



Specifications

Input: AC 100-240V 50/60Hz 0.25A(MAX), DC 12V 1A

Output voltage: 4.2V ?1% / 3.7V ?1% / 1.48V ?1%

Output current: 500mA x 2

Compatible with:

Li-ion / IMR / LiFePO4: 26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340 (RCR123), 14500, 10440

Ni-MH / Ni-Cd: AA, AAA, AAAA, C

Dimensions: 143mm? 74mm?36mm | Weight: 168g (without batteries and power cord)

12V Capable with optional cable (Not included)



Battery carry box

EdisonBright battery carry box for multiple battery types.



This bundle includes

- Nitecore D2 Digicharger with AC & 12V Car charger cords

- EdisonBright battery carry box

• Compatible with and identifies Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries
• Capable of charging 2 batteries simultaneously; Each of the two battery slots monitors and charges independently Compatible with LiFePO4 batteries too
• Optimized charging design for IMR batteries & over-charge prevention to protect batteries
• Integrated LCD panel clearly displays charging parameters and progress; Two conveniently located side buttons allow easy selection of specific battery types and charging parameters
• This bundle includes EdisonBright battery carry case with in-car charging cable

User questions & answers

Question:	work with 220V input
Answer:	I have many Eneloop batteries and one just started blinking green. Upon examining it, I found that the + side has corroded in some way and the top layer got a bit more brown and I was able to scrape it with my finger.
Question:	aa batteries isn't listed under Li-ion. just nimh and nicd. can this charger work for Li-ion aa batteries
Answer:	Yes, the BQ-CC17 charger is rated for 100-240V universal AC input. To use it in other countries, you may need a plug adapter to physically connect the charger to the AC outlet.
Question:	Does the charger stop charging after hitting full charge
Answer:	How do you fit AAA batteries in?
Question:	Can you use this to recharge alkaline batteries
Answer:	I have not had any luck charging anything but Panasonic batteries in this. Maybe it "should" in theory charge other rechargeable batteries, but it does not. I have tried about 24 different batteries that do not work. My old charger quit working and I did not know if it was the charger or the batteries that were the problem. I bought this charger to have a new charger for my older batteries. Since it does not work for them, now I must buy ANOTHER charger - not happy

Product description

The D4 automatically detects Li-ion, Ni-MH and Ni-Cd batteries, and through manual selection is also capable of charging LiFePO4 batteries. Intelligent charging circuitry selects the optimal charging mode (CC, CV and dV/dt) for a given battery and each of the D4’s four microcomputer-controlled charging slots then monitors and charges the battery independently. Furthermore, an integrated digital LCD screen clearly displays charging progress, voltage, current and time while an intelligent automatic power-off function terminates current when charging is complete. The Nitecore D4: The world’s most advanced fully-automatic digital charger. It’s as simple as insert, detect and charge. (Equipped for in-car charging)



Features

Each of the four battery slots monitors and charges independently

Compatible with and identifies Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries

Two conveniently located side buttons allow easy selection of specific battery types and charging parameters

Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection)

Compatible with LiFePO4 batteries

Automatically stops charging when complete

Features over-charge prevention to protect batteries

Features temperature monitoring to prevent overheating

Features reverse polarity protection



NBM40- Battery Magazine (Included)

Holds up to 4x 18650 batteries

Constructed from environmentally gum

Extreme resilience, tear and rupture proof

Can handle up to 40 lbs of weight



12V DC Cable & BBX3 EdisonBright battery carry case included



**Type C and 26650 fits in two outer slots only

• Capable of charging 4 types of batteries simultaneously
• Compatible with Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA, C) rechargeable batteries
• Optimized charging design for IMR batteries; Intelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt)
• Integrated LCD panel clearly displays charging parameters and progress
• 12V DC Cable, Nitecore NBM40 battery magazine & BBX3 EdisonBright battery carry case included

User questions & answers

Question:	Nitecore: recharge the 18650 or the 18650 flat top
Answer:	Yes. I have charged both styles of 18650. It lets you know as each battery is fully charged.
Question:	does this come with batteries
Answer:	Mine didn’t
Question:	Will it charge 20700 batteries
Answer:	I'm not familiar with the 20700 battery.
Question:	Nitecore: Magazine meaning inside of most rechargeable flashlight holding 3 or 4 batteries at one time
Answer:	If you're asking about the nbm40 it's just a rubber battery holder for storage. It doesn't go in any device. It holds 4x18650 really well, even without the included strap. I keep it in a glove box with extra batteries, and have never had any issues.

• FAST AND EFFICIENT CHARGING- Reach a maximum total of 4000mA for two slots, 3000mA for one slot when pairing with a 9V QC2.0+ output USB power source. Reach a maximum 1000mA charging current per slot when paring with a standard 5V/2A USB source.
• LCD DISPLAY- Reports key realtime information such as battery health, charging status and charging mode.
• INTELLIGENT CHARGING- Automatically selects appropriate charging current and voltage to protect the batteries and prolong its lifespan
• BATTERY TYPES & SIZES - Compatible with various battery types (li-ion/imr/lifep04/ni-cd/ni-mh) and common battery sizes including (18650, 16340,14500, rechargeable AA, AAA).
• PERFECT FOR TRAVEL AND EDC - This bundle includes a LumenTac battery organizer to keep you organized when you are on the go.

User questions & answers

Question:	The picture of the box says “charging cable not included. “. so, i have to buy a micro usb to usb cable to be able to use it
Answer:	If I remember correctly mine arrived with a charging cable. Its probably a 12-18" cable. I keep a fairly new USB power supply and cords on my desk for all my USB devices so I haven't used the included cable.
Question:	Will this unit charge a protected 21700 battery? I know it will accept the unprotected battery
Answer:	Yes. It can charge both protected and unprotected 21700 battery.
Question:	where does one buy 18650 lithium batteries
Answer:	Battery junction is good. Shipping is pricey for 1 battery but doesn't go up when ordering several.
Question:	My ums2 keeps going into reboot loop when at times inserting a 18650 battery; tried 2 brands of batteries; multiple usb cables; defective
Answer:	Have you tried a more powerful (output) USB adapter? If the issue persists, contact us (the seller) and we will have the issue resolved swiftly.
Question:	Can this charge 21700 or 20700 batteries
Answer:	It seems like it can, I literally just within the last couple days got a new mod for the first time in years. I wanted to try out squonking and got the Vandyvape pulse with the newest chip. This mod takes a 20700 and has a adapter for 18650 but I wanted to run it full blown to start so I bought some Lithicore 20700 and didn't even think about my charger. So when I got to charging it I was initially upset that it didn't fit but it does! It's just a real tight fit but doesn't seem to damage the battery wrap or anything and it recognized the battery and charged um so... It DOES take 20700 but its snug and not listed on the box. Hope this helps.
Question:	Title and picture shows an i2. Description describes an i4. Can we verify which this is
Answer:	i2
Question:	Will this a charge single battery
Answer:	Yes it will charge one battery.
Question:	What are the differences between the new version and the old
Answer:	Dear friend have a nice day,thank you for your message to me ,The new version using better than the old version,the new packaging, faster charging!best regardssincerely

Product features

Fast Charging -- Even Faster with a Compatible QC2.0+ USB Power Source

• Standard Mode: Reach a maximum 1000mA charging current per slot when paring with a standard 5V/2A USB source or adapter
• QC Mode: Reach a maximum total of 4000 mA for two slots, 3000 mA for one slot when pairing with a QC2.0+ 9V output USB power source or adapter. (The LCD screen will show "Quick Charge")
• (A USB charging cable is included. USB Adapter or QC Adapter sold separately)

Intelligent USB Charging with Rich Features

• Intelligent charging technology automatically detects and applies the appropriate charging current/voltage and allows users to manually adjust the charging current/voltage for specialized batteries.
• Supports multiple USB input sources including computer USB port, power adapter, solar panel and more.
• Anti-short Circuiting and Reverse Polarity Protection
• Overtime Charging Protection
• Check the battery health with the Automatic Battery Internal Resistance Detection

User questions & answers

Question:	Does this utilize a wall pack or a car adapter
Answer:	It utilizes a wall charger. In sure there are adapters out there that can make it car compatible.
Question:	Will this charge aa/aaa batteries
Answer:	No, only the batteries specified
Question:	Will this charge protected batterys
Answer:	certainly.
Question:	does this unit charge the CR123a batterys
Answer:	If you are talking about primary CR123a then no. Primaries can never be recharged. If you're talking about RCR123a (aka 16340) then yes. As a test for fit, I put a primary CR123a (don't have any 16340's) and the sliding mechanism held the battery in place.
Question:	If the charger stops charging when the batteries are fully charged, is it safe to leave one battery in the unit so that it doesn't discharge? Thanks
Answer:	No, you should remove batteries when they are fully charged. The unit has built-in protection to prevent overcharging but why put it to the test continually? The risk of fire far exceeds the benefit of having a fully charged battery.
Question:	Since it is not clear from the sparse instructions, is charging complete when all three yellow lights cease flashing? or when they cease completely
Answer:	When all three lights cease completely the battery is charged. I usually just feel the top of the charger if it's cool then it's done.
Question:	What kind of wall charger comes with this? The picture shows a Euro style wall plug, is that what comes with this? Will I have to order a US style
Answer:	Hi, Jason...that's a very perceptive question. I hadn't noticed that style plug when I ordered the charger. But no worries, the charger comes with a standard 120V two-prong plug. One other fact, the cord length is about 3 1/2 ft from plug end to charger. Charger works great...used mine again just today!

Product features

Six-slot charging

Independent charging in up to six slots lets you charge your entire power supply more efficiently. Compatible with popular sizes including 18650, 16340, 14500, 26650 and more!

Up to 2A speeds

Get charged quicker with up to 2A speeds in a single slot.

Optimized for IMR batteries

The Q6 monitors charging to ensure even current throughout the process -- a must for extending the life of IMR batteries.

Easy to read charging indicator

A red indicator light over each bay will illuminate to indicate charging is in progress. Upon completion the light will turn green.

Intelligent Charging

The Q6 automatically identifies the inserted battery type and applies the appropriate charging voltage.

Built-in Safety Protections

Automatic timeout and internal safety protections keep your batteries safe from overcharging, overheating and short circuits.