12 best battery bls
2Pcs 3S 11.1V 12.6V 25A W/Balance 18650 Li ion Lithium Battery PCB Protection Board
Product description
Product Description
Features:
100% Brand New and High Quality
Strictly according to the diagram wiring: 0V(B )3.7V(B1)7.4V(B2)11.1V(B+), Do not deliberately short circuit.
After the line is connected, Need to charge first, then have output.
When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not same, please fill in each set of batteries and then use.
Do not mix the good battery and the battery.
The capacity of the battery internal resistance is closer will be better.
Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better. Please buyers know the professional knowledge of this module before buying.
Specification:
Over voltage range: 4.25 4.35v¡À0.05v
Over discharge voltage range: 2.3 3.0v¡À0.05v
Maximum operating current: 0 25A
Maximum transient current: 34 40A
Quiescent current: less than 30uA
Internal resistance: less than 100m?
Working temperature: 40 +50?
Storage condition: 40 +80?
Effective life: more than30000h
Short circuit protection: Yes, delayed self recovery
Size: 56mm*45mm*1.2mm(LXWXH)
Material: PCB
Color: Green
Quantity: 1 PC
Net Weight: 12g
Note: Lighting, display and other factors may cause COLOR SHADING, please comprehensive pictures and text descriptions to determine!
Package Includes:
2 x Battery Protection Board
- Over voltage range: 4.25-4.35v ± 0.05v; Over discharge voltage range: 2.3-3.0v ± 0.05v
- Maximum operating current: 0-25A ;Maximum transient current: 34-40A
- Wiring:(please check the picutre 3 wiring diagram)Strictly according to the diagram wiring: 0V(B )3.7V(B1)7.4V(B2)11.1V(B+), Do not deliberately short circuit. After the line is connected, Need to charge first, then have output.
- When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not same, please fill in each set of batteries and then use. Do not mix the good battery and the battery.
- Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
User questions & answers
| Question: | Is the max power handling 25 amps at 12v or 3.7? (300w or 92.5w |
| Answer: | At 12v. I've had no problems pulling 15-20 amps out at 12v. |
| Question: | If a single cell drops below 2.3V will the entire battery pack be disconnected? It appears that all three cells need to drop below 2.3V |
| Answer: | Calling this tiny board "BMS" is overkill, This is more of a simple "Battery Protection board" with little bit of so called "BMS" thingy. This BMS won't cut on discharge until at least one "cell-group" has dropped to a dangerously low voltage.. Since you see the arrangement is 3S and with 5 x 18650 in parallel, one of such cell-group developing an internal fault and dropping to a dangerous low level of 2.3 while the rest of the cells in the 3S configuration having more than 4.0 is very rare and if that ever happens, it better that the BMS disconnects that cell-group to save the other two groups. To answer your question: - Yes! if single cell drops below 2.3v it does have a potential for the entire battery pack to be disconnected from the output terminal by design. |
| Question: | When using a 12v power supply to charge the battery, will the BMS automatically shut off, or can it be overcharged |
| Answer: | For this item the max voltage that should be put into it for standard max voltage 4.2v 18650 batteries is 12.6v (4.2v x 3s). Any more than that and you risk overcharging (damaging) your batteries. For the longest life for the batteries over time 12v should be most optimal (ends up being about 8-10% under max capacity of most batteries). |
| Question: | One you build the battery, i assume you need a 12v dc charger. anyone have any reccomendations for chargers |
| Answer: | find something at 12.6v - there is a company called talentcell on amazon that sells some already put together batteries using 3s 18650 cells at various parallel configs to give different capacity. They do sell their 12.6v chargers separately - but keep in mind they are designed for 3s2p or 3s3p levels of setup - i think 1 or 2 amp - so depending on how big your build is - these may not work for you. I have in the past gone with 12.6 volts and used 1 amp for every parallel set of cells. so for a 3s5p battery i had a 12.6v 5a charger - lots of those on here too. |
ACEIRMC 2S 7.4V 8.4V 8A 18650 Charger PCB BMS Protection Board for Li-ion Lithium Battery Cell (8pcs)
Product description
Features:
Overcharge release voltage: 4.28V+/-0.05V.
Overdischarge detection voltage: 2.9V+/-0.05V.
Upper operating current: 8A.
Upper instantaneous current: 16A.
Static current: less than 10uA.
Charge voltage: 8.4V-9V.
Size: 41x8x2.2mm.
Packing included:2PCS.
Main function:
Overcharge protection, over discharge protection, short circuit protection, overcurrent protection.
The described power range is applicable to the following products: massager battery pack, LED lamp standby power supply, 12V electronic products, solar street lamp battery pack, monitoring standby power supply, and other products.
Wiring:
B+ : Connect to battery positive.
B- : Connect to battery negative.
MB: Connection point between battery 1 and battery 2.
P+: Positive pole for charging/discharging (common at charging/discharging end).
P- : Negative pole for charging/discharging end (common at charging/discharging end).
Tips:
When assembling the battery pack, the battery voltage, capacity and internal resistance shall be matched. The battery voltage shall be appropriate at about 3.7v of rated voltage. If there is no output after assembling the battery pack, it can be charged at 8.4v voltage.
- HIGH-ACCURACY, HIGHLY DURABLE: High-accuracy voltage detection circuit, fine workmanship and durable, Effective life greater than 50000 hours.
- Use for variety of capacities and various shapes 3.7V lithium batteries,Massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
- Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; A combination of 4 safety features that work together to provide ultimate protection for your devices.
- MOS transistor can control the battery charge and discharge, low standby current consumption.
- ATTENTION: Strictly according to the diagram wiring: B+: Battery V+ Positive, B-: Battery V- Negative, P+: Output / Charging V+, P-: Output / Charging V-, MB: The connection point between the batteries.Otherwise it will cause damage to the chip. Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
DALY BMS 4S 12V 100A LiFePO4 Battery Protection Module PCB Protection Board with Balance Leads Wires BMS for 18650 Battery Pack 12V with Cooling Fan
Product description
Adopt top quality (A-level) Seiko IC from Japan.
BMS owning waterproof patent, no worry in rainy days.
Extending battery life-span, improve performance.
Parameters:
BMS protect battery charge current: 66A.
BMS protect battery discharge current: 300A.
BMS protect battery charge voltage: 3.75V.
BMS protect battery discharge voltage: 2.2V.
Continuous charging current: 50A.
Continuous discharging current: 100A.
Balance voltage: 3.7V.
Package:
3.2V LiFePO4 BMS*1, matching balance wires*1, English version wiring manual*1.
- Over current protection---18650 LiFePO4 battery pack will stop charging when current over 66A(AMP) and will stop discharging when current over 300A(AMP).
- Over-charge over-discharge protection---18650 LiFePO4 battery pack will stop charging when its voltage reaches 3.75V and stop discharging when its voltage reaches 2.2V.
- Temperature protection---low temperature -7℃ battery protection and high temperature 70℃ discharging battery protection.
- Quality Guarantee--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED.
- Shipping time---within 9-14 days from China Dalyelec usually. Only during Labor Day(May 1-3), National Day(October 1-5) and Spring Festival(Feb 9-18, 2021) need most extra 3-10 days. Tracking information available.
Lynx Battery 12V 120Ah Lithium Iron Phosphate LiFePO4 Deep Cycle Battery Built-in BMS with Cold Cut-Off Switch & Bluetooth Enabled Perfect for Solar, RV, Marine, Golf Cart, Van & Off-Grid Applications
Lynx Battery
Product description
Included with your Lynx LiFePO4 12V 120Ah Lithium battery are +/- terminal leads and lugs
Lynx Lithium 12V 120Ah Battery is made of premium quality materials and is Bluetooth enabled with a cold cut-off switch. The built-In High-Performance Battery Management System (HPBMS) is the key to our batteries efficiency, longevity, and functionality. The HPBMS delivers wide-ranging safeguards, manages the charging/discharging process, and detects any battery performance issues, i.e., over and under voltages, exceedingly high current rates, internal/external temperatures, and external short-circuiting/ground faults, regulates the amount of power utilized to charge the cells, ensures cells are at optimal voltage, and will automatically blackout any individual cells not functioning properly, which extends the life of the battery.
Easy to Use: Our rechargeable Lithium Iron Phosphate batteries can be mounted in any orientation, even upside down. With the most advanced chemistry and weighing only 32lbs, they weigh less than half their lead-acid/AGM battery counterparts. It can be used with a standard 12v lithium battery charger.
Battery Specification:
Additional Applications:
Our Lithium-Ion 12V 120Ah deep cycle battery is ideal and preferred for supporting handling equipment, emergency lighting systems, solar & wind power, and off-grid applications, and uninterrupted standby power supply systems.
- Premium Quality with Complete Protection: A Lynx rechargeable Lithium-Ion battery 12V has a built-in BMS with Low/High Temp Cut Off to protect it from overcharging & over-discharging. Our dry battery is 50% lighter than its lead-acid counterparts, has a 20% higher capacity than leading competitors 100Ah battery, and provides better performance.
- Customer Service: All products are stocked in Seattle, Washington. We provide same/next business day handling and shipping, resulting in quicker shipments throughout the USA. Save your valuable time and choose Lynx Battery, providing outstanding customer support, unlike other competitors.
- Features: Lynx Batteries are rechargeable, long-lasting, fast-charging, ultra-lightweight, highly efficient, easy to install, Bluetooth enabled, with cold cutt-off switch, and is suitable for an enormous variety of uses, including; RV, marine, solar, golf carts, electric vehicles, DIY electric storage, emergency server backup power systems.
- 100% Satisfaction Guaranteed: Built with LiFePO4 battery cells that are engineered to deliver superior performance, is an excellent drop-in replacement for AGM & Lead Acid batteries and lasts 8 to 10 times longer. Take confidence in our quality batteries that come with a five-year warranty.
- Specifications: Our Lithium 12V battery lasts 5000+ cycles. With a nominal voltage of 12V and capacity of 120Ah, this deep cycle Lithium battery 12V has a standard charging current of 60A, with a max energy of 1.53KWh, a max continuous discharging rate of 120Ah, cut-off voltage rates; charging at 3.65V, discharging 2.5V in a heavy-duty plastic housing. 4S1P feature allows up to 4 batteries in series producing 24V, 36V, and 48V systems and 2S2P allows 4 batteries to be put into a 24V 240Ah array.
User questions & answers
| Question: | Using this battery and Renogy 20a dc-dc charger, what voltage should the charger be set at for optimum battery longevity |
| Answer: | No,they are extremely easy to apply. |
| Question: | can the 120Ahr case battery be put in series for 36V |
| Answer: | Yes,it won't affect anything when you use the flash.The picture quality is good and now I feel a whole lot more protected. |
| Question: | Can these Lynx lithium batteries be monitored on a cell phone app |
| Answer: | No,I've had no problems with my lens covers interfering with picture taken or how they come out. |
| Question: | If I later want to upgrade from the current 120 amp-hr battery to a 240 amp-hr system, what would I need to buy |
| Answer: | Yes ,they are never fall off. |
BMS LifePo4 Battery Management System for DIY Batteries, Programmable (Includes Bluetooth Module)
Product description
BMS For 4 cell, 12v volt Lithium-iron-phosphate DIY batteries.
120 amp continuous charge or discharge current.
Low Temperature Charging cutoff at -1c.
The Apps allow you to monitor SOC (state of charge), Current, Voltage, cell balance, temperature, and more.
Balance wires are included, communication modules are sold separately.
Fully programmable (additional purchase required).
To view or change Parameters, there are 3 ways to connect to the BMS.
1. Bluetooth module to IOS app. The app is on the Apple app store, it is free to view operational data, but costs $6 to view and change parameters.
2. Bluetooth module to Android app.
3. USB module to PC/desktop application. This application is free.
See the support forum at r/OverkillSolarBMS on Reddit for detailed programming instructions.
IOS app is on the Apple app store. Search for "xiaoxiangBMS"
All downloads are on Github, search for "OverkillSolarBMS"
(Outside links are not permitted on Amazon detail pages, sorry.)
FYI for experimenters: The BMS communicates with a 5v TTL UART at 9600 baud. It is directly compatible with Arduinos, etc.
The protocol is similar to MODBUS. requests and responses are in HEX. Protocol datasheet is available.
- BMS For 4 cell, 12v volt Lithium-iron-phosphate DIY batteries.
- Includes a Bluetooth Communication module. USB module sold separately.
- 120 amp continuous charge or discharge current
- Low Temperature Charging cutoff at -1c
- Fully programmable (additional purchase required) with IOS app, Android app, or Desktop app
User questions & answers
| Question: | Does this come with balance wires |
| Answer: | Yes |
| Question: | For a 24v battery bank @100 amps, do I need 1 or 2 of these bms |
| Answer: | 2. You would need to assemble 2 12v (4 cell) battery assemblies, then connect them in series. |
| Question: | will this work on a 4p4s system and do you include manual for connecting different systems |
| Answer: | I am going to include more detailed instructions for various configurations in the future. Working on it now. Feel free to email me for technical help. |
| Question: | I'm about to buy 4 cells - 3.2v 280ah battery lifepo4. would this work well with them? also, do you sell the temperature sensor? thanks |
| Answer: | The temperature sensor comes with it, and yes it would work good for your 12v cell. You will be limited to 100 amps discharge consistently. |
DALY BMS 4S 12V 250A LiFePO4 Battery Protection Module PCB Protection Board with Balance Leads Wires Protect BMS 18650 Battery Pack 12V Common Port with Cooling Fan
Product description
Adopt top quality (A-level) Seiko IC from Japan.
BMS owning waterproof patent, no worry in rainy days.
Extending battery life-span, improve performance.
Parameters:
BMS protect battery charge current: 400A.
BMS protect battery discharge current: 600A.
BMS protect battery charge voltage: 3.75V.
BMS protect battery discharge voltage: 2.2V.
Continuous charging current: 125A.
Continuous discharging current: 250A.
Balance voltage: 3.7V.
Package:
3.2V LiFePO4 BMS*1, matching balance wires*1, English version wiring manual*1.
- Over current protection---18650 LiFePO4 battery pack will stop charging when current over 400A(AMP) and will stop discharging when current over 600A(AMP).
- Over-charge over-discharge protection---18650 LiFePO4 battery pack will stop charge when its voltage reaches 3.75V and stop discharge when its voltage reaches 2.2V.
- Temperature protection---low temperature -7℃ battery protection and high temperature 70℃ discharging battery protection.
- Quality Guarantee--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED.
- Shipping time---within 9-14 days from China Dalyelec usually. Only during Labor Day(May 1-3), National Day(October 1-5) and Spring Festival(Feb 9-18, 2021) need most extra 3-10 days. Tracking information available.
User questions & answers
| Question: | Can low temp protection be changed to 0c as needed for most lifepo4 3.2v cells |
| Answer: | Yes with the right connection |
| Question: | Can you set temperature parameters to be higher than -7c and lower than 70c |
| Answer: | If you have the right connection. |
| Question: | Does this include the high-amp battery connectors |
| Answer: | Yes |
| Question: | is this just a "plug and play" system? If I buy 4 cells from china, will hooking up to this automatically balance them out? Anything else needed |
| Answer: | No.... you’re going to have to start with them balanced to connect. Top balance first. |
Lynx Battery 12V 100Ah Lithium Iron Phosphate LiFePO4 Rechargeable Prismatic Deep Cell Battery with Programmable Bluetooth Smart BMS and Cold Temp Cut Off for RV, Solar, Marine & Off-Grid Applications
Lynx Battery
Product description
Includes 4 - Prismatic 3.2V 100Ah LiFePO4 Cells with Daly smart Bluetooth 4S 100Ah BMS, 3 Heavy Duty Bus Bars, 8 Lug Nuts, 2 - 36" Zip Ties and 1/2" x 36" 3M VHB Tape, and instruction manual.
Built with quality materials and easy to use Lynx battery rechargeable prismatic cells can be mounted in any orientation, even upside down, and weighing only 23 lbs. It is half the weight of their lead-acid/ AGM battery counterparts.
Battery Specifications:
Prismatic Cell Specifications
Battery Management System (BMS) Specifications:
Additional Applications:
Lithium-Ion prismatic deep cycle battery 12V 100Ah is ideal and preferred for the following applications.
- Premium Quality with Complete Protection: A Lynx rechargeable prismatic cell, LiFePO4 with Smart Bluetooth BMS, utilizes the most advanced high-end chemistry and safety measures. Our dry battery is 50% lighter than its lead-acid counterparts and has a significantly higher capacity and performance.
- Customer Service: All products are stocked in Seattle, Washington. We provide same/next business day handling and shipping, resulting in quicker shipments throughout the USA. Save your valuable time and choose Lynx Battery, providing outstanding customer support, unlike other competitors.
- Features: Lynx Batteries are rechargeable, long-lasting, fast-charging, ultra-lightweight, highly efficient, and easy to install. The 4S 100Ah Daly BMS with Bluetooth / Low-Temperature Cut Off allows batteries to be wired in Parallel or Series, suitable for an enormous variety of uses such as RV, Solar, and Marine.
- 100% Satisfaction Guaranteed: Built with LiFePO4 cells engineered to deliver superior performance, it is an excellent drop-in replacement for AGM & Lead Acid batteries and lasts 8 to 10 times longer. Take confidence in our quality batteries that come with a three-year warranty.
- Specifications: Our Lithium 12V battery lasts 3000+ cycles. Nominal voltage of 12V with a capacity of 100Ah, this Lithium-Ion battery has a standard charging current rate of 0.5C, with a max charge rate of 1C, a max discharging rate of 2C, a cut-off voltage; charging rate at 3.65V, discharging rate of 2.5V.
User questions & answers
| Question: | Is there a adroid app |
| Answer: | Yes this comes with an Android app Bluetooth for your phone and it has a USB plug to go into your computer as well |
| Question: | How many can be put in parallel at maximum |
| Answer: | We recommend up to 4, but the truth is more. You just need to be careful to use a busbar system to pull from all batteries if you wire more than 4. Further to the point, it would be better to wire cells in "packs" of 3.2V and lets say 400ah and then us one BMS to control all 4 packs, instead of using 4 separate. We can custom build exactly what you need, we just need to know the Ah and Volts you're aiming for. |
| Question: | Rv application. is the 12v - 120ah compatible with the iota dls-30/lifepo4 (shore power) and redarc bcdc1225d(start battery power |
| Answer: | This battery will work perfectly for the system you have. We also so it's bigger brother the 206 amp hour I think it's listed as a 200 online we can also upgrade the BMS to more amps but the one that comes with is 100 amp. |
| Question: | What ios application is used for the daly bluetooth module |
| Answer: | IPhone: Search for the APP smart bms in APP STORE You can also click this link to jump directly to download https://apps.apple.com/cn/app/smart-bms/id1519968339 |
4 PCS 12V 300Ah LiFePO4 Deep Cycle Battery, Built-in 200A BMS, 2000-5000 Cycles, Each battery Can Support 2560W Power Output, Perfect for RV, Caravan, Solar, Marine, Home Storage and Off-Grid
CHINS
Product description
About CHINS Battery
We have our own factory and have been committed to providing customers with high-quality
battery products and after-sales service. We also set up our own after-sales service center in
California, USA, to provide customers with real 10-year warranty service. It can charge
various electronic products and is compatible with various devices.
Specifications
Rated Capacity (0.2C): 300Ah / 3840Wh
Cycle life: > 2000 cycles at 100% Depth of Discharge (DoD),
up to 5000 cycles at 80% DoD
Rated voltage: 12.8V
Charge voltage: 14.4 - 14.6V
Cut-off voltage: 10V
Depth of Discharge (DoD): 100%
Standard charge current: 40A
Charging time: Approximately 6 hours
Max continuous charge current: 100A
Max continuous discharge current: 200A
Peak discharge current: 400A (Duration: less than 5 seconds)
Operating temperatures: Charge 0°C~50°C,
Discharge -20°C~60°C, Storage -20°C~50°C
Impedance: ≤ 15mΩ
Warranty Terms
1. Within 90 days from the date of purchase, if our products have quality problems and
cannot work normally., we can provide refund services.
2. More than 90 days from the date of purchase, and within 3 years, If our product fails to
work normally, the consumer assists us in completing all the battery testing, and both
parties confirm that the product does have quality problems, we will send the new product
to the consumer for free.
3. If you encounter any questions when using the product, please feel free to contact us, we
will provide 24-hour customer service.
4.Please read the product manual carefully before installing and using the product. If the
consumer fails to install, use and maintain the product correctly in accordance with the
requirements of the instruction manual, which causes serious quality problems in the
product, it is not covered by the warranty.
- 【True 10 Year Warranty】: We provide ten-year warranty service，Please check the warranty clause in the Product Description. Deep cycle LiFePO4 battery with smaller size, lighter weight, superior performance and support at least 10-year service life, which can excellent drop in replacement for Lead Acid Battery.
- 【Safety And Eco Friendly】: Our LiFePO4 battery with built-in BMS, can protect the battery from over-charging and over-discharging. Lithium iron phosphate batteries are Eco- friendly and no pollution to the environment. Our Batteries comply with European RoHS regulations and have passed SGS and SDS certification.
- 【Powerful】: CHINS LiFePO4 battery has a very stable output voltage platform with 12V for 90% of its capacity usage, providing astronomical boosts in run-time compared to Lead Acid batteries. The battery is easy installation. Last 8 to 10 times longer than standard lead acid batteries. It can support fast charging and solar panel charging.
- 【Capacity Expansion】: Our Lifepo4 batteries can be connected in parallels and in series for larger capacity and voltage. Max connection in series: Up to 4 identical batteries for up to 48V connecting in series. Connection in parallels: it can connect multiple batteries, suggest no more than 10pcs in parallel. When the batteries are used in parallel or series, the battery voltage and capacity must be the same, and purchased in near time(within 6 month).
- 【Special Note】: 50% lighter than 200Ah lead acid battery, no memory effect, no matter what state the battery is in, it can be used as soon as it is charged. Lithium iron phosphate batteries from different manufacturers cannot be connected in parallel or in series. Please carefully review the warranty terms in the product descriptions. Your package will be delivered by DHL, UPS or FedEx: ESTIMATED DELIVERY TIME IS 3-7 WORKING DAYS, Please be patient.
User questions & answers
| Question: | Where is this made |
| Answer: | I use one in my van..the rengogy 20amp in my VW produces 17 amos |
| Question: | What happens in case of a warranty claim? would i have to ship the battery to china or do you have a representative in the us |
| Answer: | Yes it can, you can up to 4 cells to 48 Volts so 36V is no problem. |
| Question: | I bought 4 12v 300ah batteries to make a 24v 600ah battery pack. in the 24v 600ah group, is the maximum continuous charging current still 100a and the |
| Answer: | Yes...fully functional..programmable..cold cut off,. Dual temperature sensors, cell and capacity with charge and discharge monitor. Free download for android or iPhone.. Plus 20 percent more capacity than other comparible batteries. |
| Question: | What are the warranty terms for the period from “after 36 months up to 120 months” from ship date |
| Answer: | Just another battery identical. You can wire the next purchase in series or parallel giving you either 240Ah in 12V or 120Ah in 24V. These batteries are made with the newest available 32700 cells set is 4 strings of 20 cells each with a full functioning Bluetooth programable BMS from Daly. One of the reasons there are new reviews on this particular battery is it's brand new...visit our ship on Amazon here...amazon.com/lynxbattery |
Lynx Battery 48V 200Ah Lithium Iron Phosphate LiFePO4 Rechargeable Prismatic Deep Cell Battery with BMS and Preset Cold Temp Cut Off for RV, Solar, Marine & Off-Grid Applications
Lynx Battery
Product description
The 48V 200Ah Rechargeable Lithium Iron Phosphate Battery arrives unassemble and contains everything you need to build your own battery. It will arrive in 4 boxes of 12V 200Ah batteries with a BMS and additional parts.
Includes 16 - Prismatic 3.2V 200Ah LiFePO4 Cells with Daly 16S 100Ah BMS, 15 Bus Bars, 32 Lugs, 8 - 36" Zip Ties, 1/2" x 72" 3M VHB Tape and instructions to build the battery as shown in images.
Built with quality materials and easy to use our Rechargeable Prismatic Cells can be mounted in any orientation, even upside down.
Battery Specs:
Prismatic Cell Specs:
Battery Management System (BMS) Specs:
Additional Applications:
Lithium-Ion prismatic deep cycle battery 48V 200Ah is ideal and preferred for the following applications.
- Premium Quality with Complete Protection: A Lynx rechargeable prismatic cell, LiFePO4 with Daly BMS, utilizes the most advanced high-end chemistry and safety measures. Our dry battery is 50% lighter than its lead-acid/AGM battery counterparts and has a significantly higher capacity and performance.
- Customer Service: All products are stocked in Seattle, Washington. We provide same/next business day handling and shipping, resulting in quicker shipments throughout the USA. Save your valuable time and choose Lynx Battery, providing outstanding customer support, unlike other competitors.
- Features: Lynx Batteries are rechargeable, long-lasting, fast-charging, ultra-lightweight, highly efficient, and easy to install. The 16S 100Ah Daly BMS with preset Low-Temperature Cut Off allows batteries to be wired in Parallel or Series, suitable for an enormous variety of uses such as RV, Solar, and Marine.
- 100% Satisfaction Guaranteed: Built with LiFePO4 cells engineered to deliver superior performance, it is an excellent drop-in replacement for AGM & Lead Acid batteries and lasts 8 to 10 times longer. Take confidence in our quality batteries that come with a three-year warranty.
- Specifications: Our Lithium 48V battery lasts 3000+ cycles. Nominal voltage of 48V with a capacity of 200Ah, this Lithium-Ion battery has a standard charging current rate of 0.5C, with a max charge rate of 1C, a max discharging rate of 2C, a cut-off voltage; charging rate at 3.65V, discharging rate of 2.5V.
User questions & answers
| Question: | Weight? Dimensions? 24Volt shown instead of 48. It is the wrong information |
| Answer: | The 4 12V300AH batteries you bought will be made into 2S2P (2 in series, 2 in parallel). It can reach 25.6V 600AH. Maximum support 200A charging, 400A discharge. |
| Question: | How many amps is the BMS rated at |
| Answer: | We support 10 years warranty; And our battery life time can be more than 10 Years. That is the unique advantage for LiFePO4 battery technology. 1. More than 3 years from the date of purchase, and within 10 years, If our product fails towork normally, We provide free maintenance services and consulting services. 2. If you encounter any questions when using the product, please feel free to contact us, we will provide 24-hour customer service. |
Aoicrie 4 Serial 4S 30A 14.8V 18650 Lithium Battery BMS PCB Protection Board Balance Integrated Circuits with Equalization 4S 30A Protect with Balance for li-ion Battery Cell Pack Module with Cable
Product description
Product description
14.8V 4S 30A 18650 Lithium Battery BMS PCB Integrated Circuits Protection Board
Specifications Over charge detection voltage: 4.28 0.05 V Over charging voltage: 4.08 ± 0.1 Over discharge voltage: 2.55±0.08 Over charge detection delay time 0.1s Temperature range：-30/ 80℃ Balanced current: 60±5 mA Working current: 30A Over current: 75±5A Short circuit protection function: there is, disconnect the load can be self recovery.
Main function: Over charge protection, over discharge protection function, short circuit protection function, over current protection function, balance.
Feature:
1：high-accuracy voltage detection circuit;
2：terminal of the charger using high voltage device;
3：Low-resistance MOS transistors control the battery charge and discharge;
4：low standby current consumption.
5：With Balance
6：Overcharging Dete ction Voltage: 4.25 +/- 0.05V
7：Over charge detection delay: 0.1s
8：Over charging Detection Voltage: 2.5+/-0.025V
9：Over-current : 20-30A
10：Short Circuit Protection Restoration State: release the load and automatic restore
11：temperature protection: Yes
12：Low internal resistance
13：working temperature range: -40~85 celsius
Application:
Vacuum cleaner
massager battery pack
LED backup power supply
14.8V 16V li-ion electronics
solar power led, ect
Note:The protection board can not be used for lithium iron phosphate battery, hernia lamp, hand drill battery pack, can not be used for electric fish machine battery pack, electric bicycle battery pack, children's car battery, 775 (4A) motor, 1W fish eye LED light.
Package inlcuded:
1 x 4S 30A lithium Battery Protection Board
1 x Connecting line
- Integrated 10 low load resistance MOS tube, continuous discharge 40A, 100mA balanced current, for electric drill/sprayer/ LED lights/low power inverter, Fine workmanship and durable.
- 4S 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery), increased anti-interference function, reduce the large current heat by 30%, starting power increased from 135W to 220W (4S40A).
- Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use).Over current protection function, band balance.
- Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery).Over charge protection, over discharge protection function and short circuit protection.
- Over charge detection voltage: 4.28+ 0.05 V,Over charging voltage: 4.08 ± 0.1,Over discharge voltage: 2.55±0.08,Over charge detection delay time 0.1s,Working current: 40A,Continuous charge current (upper limit): 20A.
User questions & answers
| Question: | What are the dimensions of the board |
| Answer: | The approx.45x56mm，B-, N-, P- pads are all over the hole, the hole diameter of the pad is 3.5mm. |
HONDA Optimate 3
Honda
Product description
OptiMate 3, the all-in-one tool for 12V battery care at home. Diagnoses, recovers, charges, tests and optimally maintains, automatically. The latest version of OptiMate 3 retains all easy-to-use characteristics of the over 2 million OptiMates produced since 1995, but is now lighter and more efficient than ever. The OptiMate 3 recovers sulphated batteries and then tests after charging. The maintenance program delivers only what the battery needs, never overcharges, never undercharges.
- New OEM Honda Optimate3 Honda
- CHARGING AMPS : 0.8A (constant current)
- USE : Indoor / Outdoor (lowest temperature: -4°F / -20°C).
- SAVE : Low Volt Start of 2V + 2 step desulphation recovery.
- IDEAL FOR : STD, AGM & GEL 12V batteries from 3 – 50Ah.
User questions & answers
| Question: | Do I need to buy additional cables to use this |
| Answer: | Weighs about 175lbs. As pictures the dimensions are about 7" deep x 9" tall x "33" long. You could do two rows and half the length and double the depth. The 48V is pictured, 16 cells 206Ah each at nominal voltage of 3.2V. |
| Question: | how do you use this on a generator |
| Answer: | This comes with 150 amp BMS at 48 v. You can upgrade to a 200 amp we have in stock as well for $100 more. We are currently building our page where you can build your own prismatic set but it's still in the works so you'll have to contact us to get the 200 worked out. |
| Question: | Can this be used on the Honda 3000is generator |
| Answer: | Our products are made in China. All lithium iron phosphate batteries are produced in China. Many American sellers also purchase lithium iron phosphate batteries in Shenzhen, China. We provide quality assurance service, you can buy with confidence. Our factory is Located in Shenzhen China, which city have the most Leading LiFePO4 battery technology and complete supply chain. Our factory manufacture LiFePO4 battery Product more than 10 Years, and our product widely used in Residential, Commercial, and Industry market, we have rich experience in LiFePO4 battery solutions. So if you have any demands, please feel free to choose our standard product and we will provide you good product and service for sure. Thanks for your inquiry, and Looking forward to supporting you. |
| Question: | Can this item be connected to 230/240v supply? I.e uk or australia |
| Answer: | There is a warranty clause in our battery specification, and we provide ten-year warranty service. More detailed content can be viewed on the product page, which has detailed warranty claims. We have an after-sales service center in California, USA. Just send the battery back to the California after-sales service center. |
3S 20A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board 12.6V Module （3pcs）
Product description
Features: Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection PCB Board Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Product Size: 64mmx20mmx3.4mm Material:Metal Charging voltage: 12.6V Maximum output current: 20A Maximum output power / charging power: 252W Precautions: 1.Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip. 2.After connection,it need to first charge activation, then will have the output. Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better. Please buyers know the professional knowledge of this module before buying
User questions & answers
| Question: | It says 20amp discharge max. Is that continuous |
| Answer: | No. It has all that you need. You can buy a cable extender if you feel they are too short, but it was long enough for us. |
| Question: | What is the maximum charging voltage (input)? can i use a 13.8 dc source |
| Answer: | This is used on 12 volt batteries. |
| Question: | how do i wire this up to charge the batteries, it says charger |
| Answer: | It’s one of the best slow smart chargers. I use them on my Honda 7000is Plus 3 of my classic cars and my motor home |
| Question: | What happens if you use a 12.0V adapter to charge? Does it not fully charge the batteries |
| Answer: | Package shows 240volt capability |
Latest Reviews
View all
Mop Tiles
- Updated: 21.01.2021
- Read reviews
Plant Guru Essential Oil Blends
- Updated: 15.03.2021
- Read reviews
B Y Glass Desks
- Updated: 23.06.2021
- Read reviews
Medical Iv Pumps
- Updated: 01.03.2021
- Read reviews
3Drose Chef Mugs
- Updated: 08.04.2021
- Read reviews