13 best mpow bluetooth transmitters

Product description

Specifications

Bluetooth Version: 5. 0 Bluetooth

Solution: CSR8675 Product

Model: BH259

Bluetooth Range: 50feet

Bluetooth Protocol: A2DP / AVRCP

Battery Capacity: li-ion 250 mAh

Working Current: 20-30 mA < / p>

Working Voltage: DC 3.1 V-4.28 V

Frequency Range: 2.402 GHz ～ 2.480 GHz

Connection Method: 3.5mm Aux

Note

1. It's recommended to use headphones with the same chips when pairing to two headphones to prevent intermittent music, silent sound or disconnection, etc.

2. In Bluetooth transmit mode, the adapter can be paired with a Bluetooth headphone and Bluetooth speaker. It can't be paired with smartphones or other similar devices.

3. In RX mode, the transmitter and receiver cannot support hands-release calling because it has no mic function.

Packing

1 x User Manual

1 x Mpow Bluetooth Transmitter and Receiver

1 x 3. 5mm Female to 2 RCA Male Cable

1 x 3. 5mm Audio Cable

1 x USB Charging Cable

• [Transmitter & Receiver] Mpow 2 in 1 Bluetooth adapter can be used as either transmitter or receiver Support for pairing with 2 headphones/speakers simultaneously Auto pairing to the last device makes it easy for repeated use
• [Bluetooth 5 0 Audio Adapter] Built-in CSR8675 chip achieves enhanced Bluetooth 5 0 technology with faster transmission and more stable connection within 50ft range
• [aptX Low Latency&HD Audio] Achieve end-to-end audio transmission without lip-sync delay and offer you extraordinarily high definition audio which is better than CD
• [Longer Battery Time] Provides 12 hours of playtime after fully charged It's a great convenience to charge while using it
• [Easy to Use] One step to switch mode or turn on/off the adapter thanks to the simple 3-button design 3 indicators clearly show the pairing status the numbers of paring devices and the supported codec to keep you informed of the working status any time

User questions & answers

Question:	If I get two units, is it possible to set one as transmitter and another one as receiver then pair them with each other
Answer:	Yes, I got 2 units and they work for me. Very convenient.
Question:	What are the specs of the aux 3.mm input jack? my audio preamp has volume controlled rca preamp outs and fixed level rec outs... will either work
Answer:	In the manual the specs say the following: Codecs AAC/SBC/apTX Low Latency/apTX HD. I also have the Mpow Bluetooth headphones so this works good with them. Similar chip. I use to transmit from tv to transmitter to headphones.
Question:	I want to add bluetooth to my My tv and my speakers. Should I get 2 of these, one as transmitter for tv and another as receiver for speakers
Answer:	Normal - great Bluetooth connection - easy, Quick, no popping, voice message when connected - lasts for several days on a full charge
Question:	Does this support transmitting/receiving using the AAC codec
Answer:	Yes it will

Product features

Low Latency

1. About Low Latency Technology

Ensures audio-video synchronization during transmission. Mpow supports Low Latency.

2. Note:

It’s recommended to use headphones with same chips when pairing to two headphones to prevent from intermittent music, silent sound or disconnection etc.

High Definition

About HD Technology

Supports high-definition audio transmission with 'better than CD' quality. Mpow supports HD.

Audio Delay ???

Why is Audio Delay Still Noticeable?

Low Latency and HD need the support of both transmitting and receiving ends.

If the audio delay is still noticeable or the sound quality is so-so, please check whether your receiving device (Bluetooth headphone or Bluetooth music box) is compatible or not.

Product description

Q1: What is the Function of a Bluetooth Receiver?

A1: It's for enabling Bluetooth function on non-Bluetooth car/speaker/earphones so you can enjoy wireless music from a smartphone.



Pairing Steps:

1. Plug Mpow BH129 into your non-Bluetooth car/speaker's 3. 5mm aux port

2. Power on Mpow BH129 Bluetooth receiver

3. Enable Bluetooth on your phone, search and connect to "BH129"

4. After connecting Mpow with your phone, start to enjoy wireless music

5. NOTE: If you want to transfer the audio signal to your Bluetooth Devices like Bluetooth Headsets/speakers from TV/PC, you could search and connect Mpow Bluetooth Transmitter on those devices.



Q2: How to charge Mpow 129? Can I use it while charging?

A2: 1. Charge with the equipped micro USB charging cable. After fully charged, the indicator light would turn off.

2. BH129 also could be used while charging, however, there might be some current noises and a ground loop noise isolator would remove it.



Q3: Does it turn off automatically after being disconnected for a while?

A3: 1. When BH129 is left not streaming for 10 minutes, it will automatically enter sleeping mode with the indicator lights off to save power; then if you want to reconnect BH129 please short press any button to active paring mode with the indicator flashing blue and red alternately.

2. NOTE: If you want to turn BH129 off, please turn it off manually.

3. NOTE: It would not turn on automatically even at the Sleeping Mode.



Q4: Why Mpow BH129 Bluetooth Receiver could not auto re-connect to my phone?

A4: 1. Mpow could auto re-connect to the LAST paired Bluetooth device after rebooting.

2. NOTE: If your BH129 is in sleeping mode, you need to wake it by pressing any button to active paring mode with the indicator flashing blue and red alternately.

3. NOTE: If you turn off the Bluetooth on your phone last time connected to BH129, it requires manually connecting BH129 on your phone.

• MPOW FLAGSHIP BLUETOOTH 5.0 ADAPTER: Designed perfect for non-Bluetooth car/home stereo system with 3 5mm aux port to be Bluetooth enabled (If you want to connect to TV by pairing Mpow with Bluetooth headsets please search Mpow Bluetooth Transmitter ).
• CSR CHIP FOR CD-LIKE MUSIC FEAST: Adopted CSR chip for providing more stable and faster transmission with less power consumption which can represent a superior audio performance to spoil your ear and never feeling boring while driving.
• BUILT-IN MIC FOR SAFER HANDS-FREE CALLS WHILE DRIVING: Just press the answer button to answer or hang up your phone calls while driving (If you use Mpow-129 with wired headphones please answer with your headphones ).
• DUAL LINK FOR MORE CHOICE: Mpow can connect 2 Bluetooth devices at the same time for enjoying your music and won't miss any calls Or enjoy music and navigation at the same time 15 HOURS long battery life and also supports playing while charging.
• 1 SECOND SWITCHING BUTTON: Mpow Bluetooth car aux adapter designed with PHYSICAL ON/OFF SWITCH & HUMANIZED WIDENED VOLUME/TRACK BUTTON on the side for quick and convenient control for your hands-free talking and listening experience.

Product features

Safer Speakerphone Calls

After connecting to the car stereo, you can play/pause the music or answer/reject a call by easily click the multi-function button on the receiver, no need to hold the phone while driving.

Dual Connection

Mpow can connect 2 Bluetooth devices at the same time for enjoying your music and won't miss any calls.

Bluetooth 5.0 chip provides better wireless performance.

Note: The distance between Mpow and your Bluetooth devices should be within 3 feet and it may take 5-30 seconds to complete the connection.

Fast Reconnection

Switch the special button to control on-off.

After powered on, it will automatically connect to the last paired Bluetooth device.

No need to repeat the tedious pairing process after getting on the car.

Note: Mpow just could reconnect the last paired Bluetooth device automatically while pairing mode.It requires that BH129 and the Bluetooth on your device are both turned on.

One Click to Wake Voice Assistant

1. Press the MFB for 1 second to wake or end the voice assistant on your phone.

2. Using voice assistant for safe driving

3. This function is applicable to Siri, Google Assistant or other voice assistants on Android devices

15 Hours Long Battery Life

To fully charging 2 Hours for 15 Hours music enjoyment or 120 Hours standby time.

Note:

1. If you want to turn Mpow off,please kindly turn the switch to off for It won't turn off automatically.

2. Please be sure the charging input voltage to Mpow do not over 5V and do not use fast charger.

Safe Using While Charging

1. Stop Charging after Fully Charged After the product is being fully charged, the charger should be unplugged in time. Overcharging for a long time may damage the positive electrode of the battery, which will damage the negative pole of the battery and shorten the battery life.

2. Charge in Time After the battery of the product runs out, please charge it as soon as possible. Otherwise, it may cause the remaining power in the battery to be discharged quickly, which will damage the negative pole of the battery and shorten the battery life

Product description

Mpow Bluetooth 5.0 transmitter receiver 2 in 1 Make every classic sound box, old TV, PC have Bluetooth function.



Recommended uses:

Bluetooth transmitter mode -> add Bluetooth function to your TV, PC, etc. Stream audio to Bluetooth headphones/ speakers.



Bluetooth receiver mode ->add Bluetooth function to a wired speaker, sound bar, home theatre etc. Receive audio wirelessly from any Bluetooth audio device. Such as Pc, mobile phone etc.



Doesn't out/ not recommended:



33feet coverage: but, your range will depend on your connecting device and other factors



multipoint support works best for same brand/ model of headphones. For Many headphones/speakers (such as Bose, Beats, Sony) are primarily for music, not watching TV and do not support low latency. In order to avoid lip-sync issues, your BT headset or speaker also needs to support the code of Low Latency. Please check with your device manufacturer to verify this. If not, the codec would be downgraded to aptX or even SBC, and you may experience the noticeable audio lag, It is not Bluetooth adapter's problem.



not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc.)



when using the transmitter The TV internal speakers might not out or become muted. This is TV dependent.

• Low Delay: Bluetooth transmitter for TV supports aptX Low Latency for extra smooth listening. Bluetooth Receiver Supports aptX HD for enjoying cd-like music, stream audio from your phone to non-Bluetooth device(home stereo system, speakers).
• Bluetooth Technology 5 0: Bluetooth transmitter receiver equipped with the latest Bluetooth 5 0 and delivers a faster and more stable wireless connection. Built-in microphone, you can enjoy hands-free calling, pick up or hang up a phone call by click the play/pause button.
• 1 for 2 Connection: Bluetooth adapter can be paired with two Bluetooth receivers (like headphones) so you and your family can share high quality music or movie The aptX Low Latency techniques are available only when paired devices Also supported
• Update Old Stereo: Bluetooth receiver mode, connecting bluetooth receiver to non-Bluetooth music speaker, ideal for stream music from your phone to home or car sound system. Bluetooth transmitter mode, add Bluetooth transmitter function to old TV, PC, iPod,
• Warm Tips: Mpow Bluetooth transmitter receiver Built-in battery for up to 14 hours use Please charge it with a 5V standard adapter instead of TV's USB port

User questions & answers

Question:	Can this bluetooth 5.0 transmitter support two aptx low latency headsets simultaneously in aptx low latency mode for both
Answer:	Mine did not have a mounting bracket
Question:	Can it be plugged into an outlet all the time
Answer:	What are the specs, RMS, range output etc of both
Question:	Does this device support the AAC codec
Answer:	Thank you for the message here at Unhinged ATV. According to the manufacturer they have not dyno tested this amp however the engineers have tested them for accurate RMS Power which is comparable to the Dyno testing. If you have any additional questions feel free to let us know. Cheyenne Unhinged ATV
Question:	Why does this not reconnect to my hwadphones when i turn it back on. I have to try and repair like 10 times every time i turn it on in order to use i
Answer:	We sell the mtx mud 600.1 for a subwoofer

Product features

MPOW BH390A Bluetooth Transmitter Receiver

• As a Bluetooth transmitter, BH390A works by turning any non-Bluetooth audio source (TV, iPod, e-Book reader and Nintendo Switch/3DS into Bluetooth-enabled devices so that you can enjoy wireless audio with Bluetooth headphone.
• As a Bluetooth receiver, BH390A works by turning your non-Bluetooth audio devices (old speaker, wired headphone and car audio system) into Bluetooth-enabled devices so that you can play music or answer phone calls through your smartphone via Bluetooth.

Pairing to 2 Headphones

• In TX mode, MPOW Bluetooth Transmitter Receiver supports pairing to 2 heaphones simultaneously. Want to share a movie with your friend?
• Just connect MPOW with 2 Bluetooth headsets, and let movie begins.

Noise-Cancelling Hands-Free Calls

• Worry about lost sound quality or unclear calls?
• MPOW Bluetooth Transmitter Receiver adopts a premium CSR 8675 and cVc 8.0 noise reduction chipset in order to keep the authentic sound quality, delivering HD sound to your wireless device.

aptx-Low Latency

• Enjoy end-to-end audio transmission speed. In TX Mode, while you play games, the Low Latency delivers the smoothest and immersive audio for you.
• Note: this feature requires your headset supports Low Latency as well.

Authentic HD Sound

Mpow delivers HD music with Qualcomm chip, minimizing the loss of sound quality. You can have the wired authentic music quality in a wireless lifestyle, both in RX and TX mode

Extended Long Connection Range

• Having wireless freedom while you walk anywhere in the house. Mpow Bluetooth Transmitter Receiver offers up to 33 feet Bluetooth connection distance in an open space.
• Note: the range can be shortened by physical obstructions and wireless interference.

Easy Operation

Mpow Bluetooth transmitter receiver are quite easy to use. On the side of the product, you can see a switch. You can turn on different modes by pushing it to TX or RX. There is an LED light in the front button to indicate current mode: green means TX, blue means RX

Product description

Want a smaller 2-in-1 Bluetooth adapter without shrinking in function? Confused by complex keys and operation steps and want a simpler one? Worry that wireless audio transmission would impact sound quality? Mpow Bluetooth Transmitter and Receiver would be a perfect choice for you Simplify the Surface and Operation Mpow simplified the appearance and layout of buttons There are only 2 buttons on the surface one for multifunction and another for TX/RX mode switching One key to switch between transmitter and receiver function Portable Little Gadget Small and handy Bluetooth transmitter and receiver suitable for carrying use without taking much space About Mpow Mpow a brand specializing in consumer electronics and accessories spreads its operation to over 10 countries like America Britain France Germany and more We never stop our pursuit of creating products with simplicity and usability We talk and listen to customers and value every constructive feedback to improve our products and services Thank you for choosing Mpow Specification Color Black Size 2 0×1 3×0 4in Bluetooth Range 33ft Bluetooth Protocol A2DP/AVRCP Battery Capacity 250mAH Charging Voltage DC 5 0V Codecs AAC SBC TM Package Contents Mpow Bluetooth Transmitter & Receiver ×1 User Manual ×1 USB Charging Cable ×1 3 5mm Audio Cable ×1 3 5mm Female to 2 RCA Male Cable ×1

• BLUETOOTH TRANSMITTER (TX MODE) The Bluetooth audio adapter makes your TV PC/ laptop or other favorite device and wirelessly stream to your headphones/ speakers Enjoy the games or movies without bothering others Solve the hard of hearing problem
• BLUETOOTH RECEIVER (RX MODE) The Bluetooth audio receiver can transmitter audio from smart Phone/Laptop/Tablet to non-Bluetooth headphone/speaker/car stereo via 3 5mm cable Makes all your non Bluetooth devices capable of connecting wirelessly
• DUAL LINK Connect two Bluetooth headsets or speakers simultaneously in transmitter mode which can share the fun with your famliy Or pair two two phones or tablets to your car/home stereo system to stream music in receiver mode at the same time
• TERRIFIC SOUND QUALITY Mpow Bluetooth apater built-in advanced CSR chip both transmitter mode and receiver mode support sound quality to keep more audio details providing you with a richer and near-lossless sound
• EASY TO USE Mpow Bluetooth transmitter and receiver is designed with slider switch you can one key to switch between TX and RX mode without to turn off the adapter at first It's easy to set up and small enough to hide behind your TV

User questions & answers

Question:	Can I connect this to older iPod that does not have bluetooth, then listen on my bluetooth headphones
Answer:	I don’t know exactly what you’ve tried, but I thought I was going crazy bc every minute it would disconnect... but then I realized that it needed to be charged. It fixed it for me let me know if it worked for you
Question:	How long is the cable
Answer:	I got a different cable for mine. For me, it was the cable and not the unit.
Question:	Why wont it stayed paired
Answer:	As long as your ipad with usb c interface.
Question:	Why is the sound quality so bad? So much background noise I can’t use it. A complete wast of money
Answer:	It should work with any device that you can hook up bluetooth with and pair to.

Product description

It is time to turn your old wired devices into wireless ones with upgraded MPOW Bluetooth receiver, enjoying your wireless life freely!

Premium Sound Quality:

MPOW Bluetooth receiver uses updated wireless technology to adapt audio systems, which is featured with Bluetooth 5.0 and CSR core for premium sound quality and stable transmission. The small and lightweight device enables you to enjoy clear music freely and wirelessly.

Wide Compatibility:

Compatible with iPhone, iPod, iPad, Android Smartphones, Tablets, and other Bluetooth-enabled electronical Devices, ideal for any powered Car with AUX interface & Home Stereo Sound System and Speakers via the 3.5 mm audio cable/adapter.

Easy to Operation and Auto-repair:

Just switch on the key button, and plug in your devices without Bluetooth. Then pair on your smartphone and play the music. You don’t need to repair your devices every time, MPOW Bluetooth receiver can be repair automatically.

Specifications:

Connection Technology: Bluetooth 5.0 and CSR Core

Bluetooth Range: 66 Feet

Charge Voltage: DC 5.0V Usage Temperature: 0-45℃ / 32-113

Package Included:

1 × Bluetooth Receiver

1 × USB Charging Cable

1 × 3.5mm Audio Cable

1 × 3.5mm Male to Male Connector

1 × User Manual

• SOLID CONNECTION : Mpow Bluetooth audio adapter equipped with Bluetooth 5.0 technology and CSR chip to ensure instant pairing and maintains a strong connection up to 66 ft.
• AMAZING SOUND QUALITY: Thanks to the Bluetooth 5.0 Mpow can turn your older stereo into a nifty Bluetooth capable one. You can enjoy the Hi-Fi music streaming by connecting Mpow Bluetooth receiver to non-Bluetooth car/home stereos system.
• LONGER BATTERY LIFE: Enjoy wireless music for longer with this rechargeable wireless Bluetooth receiver's extended 12 hour battery life.
• EASY TO USE & NO CORDS: Simple button interface. Designed with ON/OFF slider switch for getting rid of long press. 3.5mm male to male connector to get rid of the wire bonds, but without compromising sound quality. Only you and music, pure and simple.
• WORKS FLAWLESSLY REGARDLESS OF DEVICES USED: With this sweet adapter you are able to enjoy the old stereo(such as car/wired speakers/wire headphones, etc) again with the modern "Bluetooth" tech through your cell phone.

Product features

Advanced Bluetooth 5.0 & CSR Chip

With the latest Bluetooth 5.0 & CSR chip, this Mpow Bluetooth receiver offers enhanced sound transmission, faster pairing, more stable wireless connection and wider compatibility with Bluetooth enabled devices.

We are making music playback and conversations smoother and clearer than ever. Make your lifestyle cool with Bluetooth 5.0.

Convenient Hands Release Calling & Voice Assistant

1. Built-in microphone for Hands Release calling
2. Supports voice assistant for match your smart life and safer driving.
3. Noise Cancelling microphone technology gives you a clearer phone communication.

Long Wireless Streaming Range

Stable and fast wireless signal transmission with Bluetooth 5.0 technology and CSR high efficient chip:

1. Music streaming from up to 66 feet+ away
2. Hands Release calls from 33 feet+ away

Long Battery Life

1. 12 hours of wireless music playing
2. 10 hours clear Hands Release calls

Note: In order to save power: The LED indicator turns off in 10 seconds after connected (but you can press any key to activate).

After 10 minutes, if there is no connection, it will automatically shut down, so you need to restart / boot to reconnect.

Easy to Use

1. Compact audio jack design for convenient use
2. Smooth slide switch for easy operation
3. Multi-Function Button for Play/Pause/Answer or End calls
4. Next/ Previous Track: Click one the “+”/ “-“
5. Built-in microphone for Hands Release calling
6. Round jade-like touch with white-loop LED indicator

Small and light design

Mpow Bluetooth Receiver is compact, wireless, and made to go with you anywhere to keep your music going on the move with no reduction in functions.

Product description

MPOW NEW WIRELESS MUSIC RECEIVER

NEW DESIGN! Display them all!



An OLED screen installed: Show Bluetooth connection status, battery, volume, and caller’s ID.



Bluetooth 5.0 and CSR Chip

Offer the fastest and strongest wireless connection and Hi-fi rich bass sound.



Double Noise Cancellation

Get clear hands-release calling experience for both ends of the call by DSP and noise cancellation



12 Hours of Battery Life

A single charge only takes 2.5 hours. The lithium battery supports safe using while charging.



Wide Compatibility

The 3.5mm AUX adapter and cable are wildly applicable to all wired speakers and headphones.



Compact And Polish Design

Mpow Bluetooth receive is artfully designed with round corners for smoother touch. Easy plug, pair and play. This updated unit comes with a USB power adapter. Plug into cars/wired headpones/home stereo systems or other speaker systems via the 3. 5 mm or RCA cable, then pair with the Bluetooth audio devices such as iPhone, iPad tablet and other Android Smartphones. After that, you can enjoy the music.

• NEW DESIGN: The first Bluetooth receiver with a display screen has come You can have all the information of the wireless streaming status from a simple glance at the screen It shows Bluetooth connection status battery volume and caller’s ID etc
• NOISE CANCELLATION: Mpow offers the best hands-release calling experience by using dual noise-canceling technology The receiver has DSP and noise-canceling software installed ensuring both clear listening and authentic voice transmitted
• 3D SURROUND SOUND: Mpow provides Hi-fi wireless audio experience with a built-in CSR chip that supports AVRCP A2DP HFP and HSP profile If you prefer rich bass and stereo sound just press “+” and “-“ buttons to activate surround sound effects
• BLUETOOTH 5 0 RECEIVER: Installed with Bluetooth 5 0 chip Mpow new wireless music receiver has an unrivalled performance with 2 times faster transmission speed stronger connection stability and wider signal range of 40 feet than the older version
• HANDS-RELEASE CALLS & VOCIE ASSISTANT: One-click “✆ ”to Answer/ Hang up/ Refuse or Redial a Call Long press “MBF” to active Siri or Google Assistant to make phone calls send texts or get driving directions Make your drive more safely and convenient

Product features

Car Kit with Auto Power on

Mpow new wireless receiver automatically turns on when the car is started.

This feature requires the switch is slid to ON and the charging cable is connected to power.

Stay Pairing with 2 Devices

Mpow wireless receiver can pair with 2 Bluetooth devices simultaneously.

2 Bluetooth icons on the screen show the pairing status.

Easily switch between two devices.

Activate Voice Assistant

Press the MFB for 1 second to wake Siri or any voice assistant on your phone for safe driving.

The built-in noise-canceling microphone clearly captures your voice even in a loud environment.

Connect Everything

Mpow wireless music receiver is compatible with all non-Bluetooth audio source devices.

Non- Bluetooth Car Stereo

Wired Home Stereo

Wired Headphones

Compact and Portable

2 in. x 1.3 in. mini size is convenient for carrying around.

Round corner design makes it perfect to fit your palm.

Ultra-light weight ensures easy installation anywhere.

Easy Installation

No more tools or installing software required.

Simple plug in and sing along

2 ways of connection: 3.5mm male to male connector or 20 inches 3. 5mm Audio Cable

Product description

Frequently Asked Questions

Q1: What range can I expect?



This is a Class 1 Bluetooth device and can achieve up to 164ft in open air line-of-sight conditions.

TWS earbuds and other small, compact devices often have miniaturized internal antennae which can impact the overall range.

In general, operation range can be affected by physical obstructions (walls, people, etc.), wireless interference (Wi-Fi routers, Wireless TV adapters etc.) as well as the reception of the receiving device.

Single link connections have better range when compared to dual link connections.



Q2: My TV speakers go silent (become muted) when I use the Mpow TX Mode. Can I make them work simultaneously while using the transmitter?



This is a TV feature and its availability depends on your TV make and model.



For many models of TV, the built-in speakers might not work if you choose to use an external speaker. They will either automatically mute when you plug something into an audio output port (AUX, RCA, Optical, etc.) or they become disabled once you choose "External Speakers" as your TV's audio output. Some newer TVs however, allow you to play audio from both the TV's internal speakers and an external audio device simultaneously. For example the newer LG TVs with WebOS versions 3.0 and 3.5 have this feature but Samsung TVs still do not. In the LG TV WebOS 3.0 / 3.5 example, you can enable this feature by changing the TV AUDIO OUT setting from "Internal TV Speaker" to “Internal TV Speaker + Optical”. Now all audio will simultaneously come from both your TV's speakers and the device connected to the digital optical audio output port.



Q3: My TV is fixed on the wall, it is difficult to set up cable. Will this play audio coming from my TV box (e.g. Roku) that is connected to my TV via hdmi?

A: This transmitter doesn’t support HDMI jack.

• TITLE &KEYWORDS: Bluetooth 5.0 Transmitter Receiver 50m/164ft Long Range 3 in 1 Bluetooth Wireless Audio Adapter with Qualcomm aptX HD audio, Qualcomm aptX Low Latency audio and Dual Link, for TV Home Stereo System PC Headphone Speaker
• BLUETOOTH 5.0 & LONG RANGE: Features latest Bluetooth 5.0 and high-end CSR8675 chip, the Bluetooth Audio Adapter achieves more stable and faster transmission, less power consumption and longer transmission distance (up to 50m/164ft )
• INCREDIB: Mpow uses Bluetooth 5.0 technology and CSR8675 chip, audio transmission distance up to 164ft line-of-sight in open air. Use with your projector to watch movies outside. Note: operating range can be affected by multiple factors
• TRUE AUTHENTIC SOUND: with built-in advanced CSR chip, both transmitter mode and receiver mode support hi-fi sound quality to keep more audio details, providing near-lossless sound.
• EASY TO SET UP USE: supports Digital optical/ aux/ RCA Audio output standards making it compatible with 99% of the TVs on the market.Easy to pair and connect even with 2 devices, smart LED indicators will visually display the connection status

User questions & answers

Question:	How many devices can I connect to the transmitter? I need
Answer:	As I understand it, this MPow device can link with two other Bluetooth devices in either receiver or transmitter mode. I use it as a receiver and only one connected device can be transmitting to it at any given time. The instructions state that two pair of headphones can be used at one time but certain aptX features are disabled when doing so.
Question:	Can I use this on my 90's-ish stereo receiver
Answer:	I use this device on an 80s-ish stereo receiver. As the ad states, it comes with an RCA to 3.5mm adaptor cord. You need to have an open input (like Tape) or a Monitor input that you can hook this up to via the RCA plugs on the adaptor cord. In my environment I find that this Mpow device works very well.
Question:	Does this really transmit that far as described? I have a standard cheap bluetooth earbuds and need about 50 ft distance
Answer:	It transfers to my bluetooth headset at about 100 feet, through 2 walls, and into my metal shop building. At 120 feet, it begans to cut out in the shop. 2.4g wifi can interfere with it. I have a 2.4g wifi extender in the shop. If its on, the Bluetooth will not work over 100 feet.
Question:	Does anyone know how to clear paired devices
Answer:	I generally find Bluetooth devices to be a pain when it comes to pairing and unpairing especially since the information provided is so cryptic. Not only are some instruction manuals difficult to understand but devices like my smartphone rarely display useful names for paired or connected devices. Regarding your question, I’ve had no difficulty deleting paired devices on the BH262 by pressing the “pairing button” (second from the left and having the circle of two arrows embossed on it) and holding it for at least 8 seconds. The RX or TX light (depending on whether the device is set to Receive or Transmit) will flash rapidly (for about 8 seconds) then will flash slowly two times (watch carefully or you can miss it) then rapidly again if you continue to hold the button (this “final” rapid flashing indicates the BH262 is in pairing mode). Be sure to delete the pairing from the other device (smartphone, headphones, TV or whatever) too or you will either have an orphan pairing entry in the Bluetooth chipset memory or get unexpected results. The BH262 instruction manual implies that you can have two devices paired and by disconnecting one of them re-enter pairing mode and pair a different (third) device. Unfortunately I can’t test this as I only have two devices (a smartphone and a tablet) but I’ll update this answer if I find someone willing to help with the experiment. I hope this helps...

Product features

ENJOY THE WONDERFUL WIRELESS WORLD WITH MPOW BLUETOOTH TRANSMITTER AND RECEIVER!

Mpow Bluetooth 5.0 Transmitter Receiver, it is a long range 3-in-1 Bluetooth audio adapter with functions transmitter ,receiver & bypass together.

Recommended:

• Transmitter -> Bluetooth-enable your TV, PC, AV receiver (e.g. Yamaha, Onkyo, Denon), TV Box etc. Stream audio to any Bluetooth headphones / speakers, e.g. Bose, Beats, Sony, Plantronics, Apple AirPods headphones.
• Receiver -> Bluetooth-enable a wired speaker, soundbar, home theater etc. Receive audio wirelessly from any Bluetooth audio device e.g. PC, mobile phone, Echo, Echo Dot,etc.
• Equipped with convenient Bypass function - easily switches between your wired connection (e.g. soundbar) and Bluetooth.
• Uses aptX low latency to eliminate lip sync delay. Compatible with devices with optical, RCA and AUX audio outputs.

Doesn't work / not recommended:

• This is a Class 1 Bluetooth transceiver - proven to reach up to 164'. However, your range will depend on your connecting device and other factors
• For TV optical output - set audio format to PCM. Dolby / DTS is not supported.
• Works as EITHER a transmitter or receiver - NOT simultaneously work as a repeater.
• Multipoint support does not work for all Bluetooth products.
• For non- aptX LL supported headphones / speakers (e.g. Bose, Beats, Sony headphones), Oasis will work with them using SBC or aptX codec with 70-200ms latency - Lip-sync delay could be noticed by sensitive users.
• It doesn’t support aptX LL when dual link.
• Not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc.)
• When using the transmitter the TV internal speakers might not work or become muted. This is TV dependent.

TX Mode

Stream audio from your Non-Bluetooth TV/PC/CD Player/iPod/MP3/MP4 to Bluetooth Headset/Bluetooth Speaker. Pair with 2 Bluetooth headphones/speakers simultaneously, you can enjoy late night movies, watch ball games and play games without making any sound.

RX Mode

Enable your old home stereo, non-Bluetooth Speaker/Soundbar/Mixer/Amplifier/Car Stereo to stream music from your Phone/Laptop/Tablet. Turn your wired device into wireless, enjoy your party with Hi-Fi music.

Bypass Mode

One more pass-through function than others, cable connection between your TV and Home Stereo/Soundbar. One-button operation, easily switch between the three modes.

Long Transmission Distance

Features CSR Bluetooth 5.0 chip, this Bluetooth transmitter ensures reliable signal and high-fidelity audio. Enjoy the freedom of wireless for applications. Automatically reconnects to the last connected device in both TX and RX modes.

Pair One with Two

Dual-link supported in both TX and RX modes. In RX mode, pair with 2 phones/Tablets at the same time and stream high-quality audio with no lag, share your enjoyment with your family of friend.

Small and Lightweight

Smaller and lighter than your iPhone X. Easy to store and takes up less space. Small but powerful, all-in-one Bluetooth wireless audio adapter meets your home audio entertainment needs. Fairly easy to setup and operate.

Product description

3 in 1 : Bluetooth Receiver +Dual USB Car Charger + Ground Loop Noise Isolator



Mpow Bluetooth Receiver, Say "No" to Noise

Mpow sells Bluetooth receiver with bundling Ground Loop Noise Isolator, which helps decrease the buzzing noise some cars make while playing music, thus giving you the best music experience.



Bluetooth 4.1

Bluetooth 4.1 technology offers significantly lower power consumption and more stable signal transmission than previous versions, thus giving you a lossless audio transmission and crystal-clear phone calls and music.



Broad Compatibility

Works with almost all Bluetooth devices and all cars with a 3.5mm input. Stream audio through 3.5mm input in car stereo and enjoy your favorite music from phone/tablet/MP3.



Simple Operation

1. Fix the receiver on the best position of the car;

2. Connect the receiver to the Aux-in jack of the car stereo system;

3. Connect the receiver to the car charger;

4. Plug the car charger into the cigarette socket;

5. Pair the receiver to your smart device;

6. Adjust the car radio to Aux in mode;

7. Now you can enjoy your music through the car stereo system.



Multifunction Button

Quick Press: Answer or Hang up call

Long Press: Reject call

Double press: Redial the last call



Attention

Please use 5V standard charger to charge Mpow. Do not use quick charger/ flash charger/ fast charger for the output voltage is over 5V and may destroy your Mpow.

• WIRELESS MUSIC: Turn your wired headphones, speakers, home stereo systems, car audio systems into Bluetooth-enabled devices. Mpow Bluetooth Receiver with Ground Loop Noise Isolator and Dual Port USB Car Charger let you enjoy high quality wireless music from phone/tablet/MP3 and Stream audio through 3.5mm input in car stereo, such as music, GPS voice navigation, and podcast.
• NOISE ISOLATOR INCLUDED: Mpow Bluetooth receiver offers you 30 feet operation range with good performance, high-fidelity stereo music and clear speech. If you are bothered by the buzzing noise, you can use the NOISE ISOLATOR to enjoy CD quality stereo sound instantly.
• AUTO-ON & AUTO-CONNECT: The receiver part comes with a magnetic mounting base to be tightened on your phone. And the audio receiver will power on automatically when you start the car, then auto sync with the last connected phone (Note: Please make sure the Bluetooth of your phone is turned on before starting the car).
• DUAL-CONNECTION & HANDS-RELEASE CALLS: This Mpow car kits lets you connecting two Bluetooth devices at the same time so that you could switch the music between two phones casually. And Mpow music receiver built-in Mic allows you to make hands-release calls easily while driving.Answer phone calls and voice activates from Bluetooth-enabled phones while on the go. Just a single press.
• HIGH-SPEED CHARGER: 2 ports USB output, 1A output for the receiver and the 2.4A output for other devices, it can even charge your iPad at full speed.(Note: Do not charge under high pressure and temperature environment for the consideration of safety and product working life.)

Product features

Voice Control

1. Press the front button for 3 seconds to activate voice the assistant on your phone (including but not limited to Siri, Google Assistant, Cortana);
2. The Bluetooth adapter collects your voice commands through a built-in microphone;
3. Enjoy safe driving while having total hands-free operation.

Music Control

1. The buttons have slightly bulgy outlines, which is easy for you to press without looking at them;
2. You can fully control the music in terms of pausing, playing, volume, and tracks;
3. Tips for getting extra volume up: turn down the volume on the car stereo, and turn up the volume to the maximum on your phones.

Call Control

1. Join the hands-free calling experience through control phone calls without your phone;
2. The Bluetooth receiver offers full access to take/end/ reject calls, and redial the last call;
3. Built-in microphone ensures clear voice capture.

Product description

TX mode:

In the TX mode, the Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to RCA connectors and AUX connectors, therefore, please kindly have a check see whether your audio sources have one of these kinds of jacks. Please note that the adapter should be plugged into the “L&R AUDIO OUT” jack or the “AUX OUT” jack on the audio source but not the “Component IN” jack.

RX mode:

In the RX mode, the Bluetooth adapter could be used as a Bluetooth receiver to non-Bluetooth stereos such as wired headsets or wired speakers. Pair the Bluetooth receiver with your cell phone, and plug your headsets into the jack on this unit, then you will be able to hear the music from your phone.

NOTE：

If the TV does not have the “AUX OUT” jack or the “L&R AUDIO OUT” jack, a headphone jack should also work.

If the TV only have a “DIGITAL AUDIO OUTPUT (OPTICAL)” jack, a convertor is needed or you could choose another model of TaoTronics Bluetooth Transmitters, TT-BA09, which is supported to both aux audio output and optical audio output.

Not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc.)

What is In the Box:

1 x TaoTronics Bluetooth 5.0 2-in-1 Adapter (Model: TT-BA07)

1 x 3.5mm Audio Cable

1 x 3.5mm Female to 2 RCA Male Cable

1 x USB Charging Cable

1 x User Guide

• LOW DELAY: Low Latency for High-fidelity Stereo Sound, lag-free content streaming in transmitter mode. Low Latency supported Bluetooth headphones/speakers are required.
• MAKE IT TWO: Upgraded 2-in-1 Bluetooth V5.0 transmitter can be paired with two Bluetooth receivers (like headphones + speakers) simultaneously. Note: Low Latency does NOT support Dual Link mode.
• ALWAYS ON: TaoTronics Bluetooth 2-in-1 Adapter continuously streams even while charging. Built-in battery for up to 10 hours use - enjoy your favorite wireless content all the time.
• BLUETOOTH EVERYWHERE: In Transmitter mode, turn a non-Bluetooth TV, PC, CD player, iPod, MP3 / MP4 into Bluetooth transmitter. Receiver mode: Ideal for home or vehicle music streaming sound system.
• PURE SOUND: high definition codec for a richer and deeper sound experience. Listen to CD-like audio quality at no compromise. Plus, 12 + 18 month extended warranty and 24/7 friendly customer service

Product features

TaoTronics Bluetooth 5.0 Transmitter & Receiver

Unlock the full potential of your devices with TaoTronics Bluetooth 5.0 transmitter, adopting Low Latency technology to deliver high-fidelity stereo sound with no delay. Confidently & seamlessly stream music from your phone/tablet to wired headphone/speaker.

Bluetooth 5.0

Ensures stable transmission to Bluetooth devices from up to 10m/33ft.

Play While Charging

Safely charge the transmitter & stream music for long periods.

One Button Control

Easily switchbetween transmitter (TX) & receiver (RX) mode.

Product description

Top Quality 3.0 In-Car Wireless Bluetooth professional-grade FM Transmitter



This little gadget with dual USB Ports Charger(one is 3.0 charger), LED digital display screen and Built-In

Mic, gives you safer, Flexible and convenient driving experience of hands-free calling, music enjoyment, quick charge.



Feature:



Wirelessly transmit phone call from mobile phone to car FM stereo system.

Switch to hands-free mode automatically from music playing status when receive call.

Built-in Microphone.

Support music playing from USB.

Detect and display the voltage of car battery when power on.

With Voice prompts.

Low voltage warming warning: Less than 12V (Voice prompt ).

Incoming call number announcement.

Supports last call redial.



Function:



Built with a high-performance microphone, with Echo Cancellation and Noise Reduction (CVC) technology offers you

a crystal clear calling and safer driving.

Two music play mode(pair with the phone via specific Bluetooth or Insert USB Disk into the “Right” USB Port) let

you be absorbed in music playing when driving.

Built in dual USB ports car charger(one 3.0 speedy charge port), and smart charging IC, automatically detects

your devices and charges all cellphone or iPad at optimal speed. Charge two devices simultaneously

and fully charged in a short time

Super compact and portable design with blue LED digital screen display of FM and car voltage,

provides you portable driving travel.



NOTE:



Please NEVER use it in these conditions:

Moist or underwater conditions.

Near heater or high-temperature service.

With direct and strong sunshine.

Never dismantle it without due permission.



Package contents:



1x Bluetooth FM Transmitter with Dual USB Charge Port

1x User Guide

• 2 PORTS USB CAR CHARGER & 3.0 CHARGER: Support charging two devices simultaneously, one port is Quick Charge 3.0 port. This fast charge port is also compatible with: 2.0, Hua Wei FCP, Type-C and Samsung. The charger efficiency is more than 80%.
• ANSWER CALLS HANDS-FREE:High-performance microphone with Noise Suppression (CVC) technology, grants you crystal clear call. Answering/redialing/dismissing or ending call just simply click a button.
• IMMERSE IN HiFi MUSIC: Insert a USB flash driver which contains MP3 files into the¡°RIGHT¡±USB port and enjoy it. If that's not enough, it can also support your playlist with no distortions of the original signal from your MP3, iPhone, Android Smartphones and more Bluetooth enabled devices.
• WIDE COMPATIBILITY: Bluetooth Car FM Transmitter can be paired as a hands-free kit with all Bluetooth enabled devices, such as iPhone, iPad, iPod, Tablet, Samsung, HTC, Sony and other Andriod Smartphones.
• MULTI-SAFETY PROTECTION: Comes with built-in over-current protection, over-voltage protection, intelligent temperature control, short circuit protection.

User questions & answers

Question:	Can i use any frequency with this transmitter
Answer:	Yes. Set up was a little difficult without instructions but it can be set to am or FM I believe and any frequency.
Question:	What version of bluetooth does this use
Answer:	The description as of Aug 2020 says Bluetooth 5.0, for item number "C57" , I search for the pdf manual on Google: "imden c57 bluetooth manual" & the specs says version 5.0
Question:	How can it have all these reviews without it being released for another 4 days
Answer:	I purchased mine in November of '18, may have new updates? Mine works great with the BT on my phone.
Question:	Does it drain the car battery if it stays plugged in even when the vehicle is off
Answer:	It depends on the port you plug it into. If the port is powered by the car battery, then it will drain it. In fact, anything you plug into that port will drain the car battery! However, if it’s only powered when the key is in the ignition, then the power to that port will be turned off when you turn the car off. Hope this helps!

Product features

Multifunctional QC3.0 BT 4.2 Bluetooth FM Transmitter

Featuring one advanced QC 3.0 speedy charge port, IMDEN Bluetooth hands-free FM transmitter is capable of streaming wonderful music and keeping you connected when driving, making your driving more interesting and safer.

Hands-free Calling

It is built-in Mic with Echo Cancellation and Noise Suppression (CVC) technology offer you a clear talking. Just one click when receiving a call, the Bluetooth FM transmitter will provide you with the hands-free function and safer driving experience.

USB / MP3 Player

Music playing via Bluetooth enabled device or USB flash drive, noise and wind suppressed by CVC technology will create full duplex sound quality, lets you enjoy the lossless music whilst driving.

Smart Car Locater Function

Open the App to get the information of destination on cell phone, broadcast your car navigation more clearly and simply, making you driving safer.

Dual Ports & QC3.0 Charger

Support charge both devices simultaneously, one is for QC3.0 quick charger. Smart output current pairs all cellphone and tablet, safely charging to your device without damage to the battery.

Using Tips:

Find out a blank FM frequency locally which is slight rustling sound instead of inserting it into the car lighter.

Insert it into the car lighter, tune the transmitter's frequency to the same FM frequency as the car radio, at this moment, your car radio will be quiet without static sound(changing it if it is static).

Insert a Micro USB Flash Driver or pair this Bluetooth FM transmitter with your digital device to enjoy music playback or hands-free conversation.

Product description

Built-in Mic for Talk:

The built-in microphone extends Mpow Bluetooth receiver’s function so that it can not only transmit music but also answer phone calls or give commands to Siri without picking up the phone .



Automatic Reconnection:

After powered on Mpow audio receiver will automatically search and connect to the last connected phone or it will enter pairing mode when the Bluetooth of the last phone is unsearchable.



When Do You Need Mpow BH044 Bluetooth Adapter?

1. Own a non-Bluetooth speaker or headphones want a more affordable solution for wireless music transmission instead of purchasing extra expensive Bluetooth speaker or headphones.

2. Want to enjoy speakerphone calls liberating hands for other crucial tasks especially driving



How to Pair 2 Phones?

1. Power on Mpow Bluetooth receiver

2. Enable Bluetooth on the 1st phone search and connect to “Streambot Mini”

3. After pairing successfully disable Bluetooth on the 1st phone Mpow will enter pairing mode again.

4. air Mpow to the 2nd phone by the same way

5. After pairing successfully enable Bluetooth on the 1st phone click to connect “Streambot Mini” again

6. Now both 2 phones are connected to Mpow



Package Contents:

Mpow Bluetooth Receiver ×1

3. 5mm Metal Audio Adapter ×1

Micro USB Charging Cable ×1

3. 5mm Audio Cable ×1

User Manual ×1

• MPOW BLUETOOTH RECEIVER 5.0: Make non-Bluetooth devices become wireless.Latest Bluetooth 5.0 technology ensures a stable connection between your phone and the non-Bluetooth audio player (with 3.5 mm AUX port) like home/car stereo,wired headphones.
• MUSIC STREAMING & HANDS-FREE CALLS: Mpow 044 Bluetooth audio adapter provides about 10 hours nonstop wireless music streaming and 8 hours hands-free calls while driving, caring for your driving safety and get rid of long boring car trip.
• SUPPORT SIRI AND GOOGLE ASSISTANT: Mpow 044 supports voice commands to ensure safe driving.You can make calls, navigation instruction with intelligent Siri/Google Assistant and Enjoy complete voice-control while you driving.
• DUAL LINK: Try to pair 2 devices with Mpow 044 at the same time. While either of the devices is within the wireless connection range, Mpow 044 will automatically reconnect to it, saving you the paring steps on the phone.
• EASY OPERATION: The easy operation of Mpow 044 makes it an ideal driver’s choice.The handy buttons can offer full access to music and hands-free call controls, like track controls for music, take, end and reject calls,even voice assistant activating.

User questions & answers

Question:	Why does it keep beeping, I see on my phone it's at 30% battery on streambot mini but it beeps nonstop and shuts off after 5 minutes
Answer:	Yes, I believe MTX even packages this amp with some of their 4 speaker marine systems.Installation involves connect 2 of the 4 speakers to each of the 2 channel outputs.Also, all of the speakers would need to have 4 ohm impedance.
Question:	Can you charge and use this at the same time
Answer:	Thank you for the question here at Unhinged ATV. According to the manufacturer yes this Amp is a 2 channel AMP. If you have any additional questions feel free to let us know. Cheyenne Unhinged ATV
Question:	How does this charge? Does it come with a cable and adapter to plug into a wall socket
Answer:	Those subs probably have a real RMS rated of 500w or less. This amp will be fine for them. It puts out a CEA rated 1500w, so you're over powering them, but if you set your gain properly, you'll be fine. I drive a pair of 600w RMS 18s and they just get warm on this amp.
Question:	If I leave this plugged into my vehicle's charging port, will it automatically turn on when I start my car
Answer:	Yes

Product features

Mpow BH044 Bluetooth Receiver

1. Multifunction Button
2. Microphone
3. Next Track/V-
4. Previous Track/V+
5. USB Charging Port
6. Indicator Light
7. 3.5mm Audio Output Port

Wireless Connection

Mpow Bluetooth receiver turns the old audio player into a Bluetooth one, receiving and playing the music list from the phone. With built-in mic, it can also start Siri or make a phone call.

Upgraded Bluetooth Receiver

Mpow BH044 Bluetooth receiver adopted high-end CSR chip and upgraded Bluetooth version from BT4.1 to latest BT5.0, therefore sound quality and transmission stability have improved a lot.

Easy 2 Steps to Pair

1. Long press 3s to start Mpow

2. Turn on Bluetooth on the phone, search and connect to “Streambot Mini”

10 Hours Battery Life

Mpow Bluetooth adapter can be used for about 10 hours after a fully charge or be charged while using. The rest battery life is visible on the paired phone. It will power off automatically if unconnected with the phone for 5 mins.

10m/33ft Signal Range

Wireless connect and control the phone within 10m/33ft, play/pause, previous/next track, volume up/down, answer/hang up a call, enable/disable Siri.

Little Gift

Mpow wireless audio receiver can be a fine little gift for friends and families to enjoy wireless music anywhere and anytime. It is suitable for headphones, car stereos and speakers with AUX port.

Product description

Amazing Mpow Bluetooth Receiver

Mpow Portable Wireless Bluetooth Receiver is designed to provide a simple hands-free solution for answering and receiving phone calls while on the go.

If your car stereo has no Bluetooth function;or if you are wondering how to get your songs to your car stereo,Mpow Bluetooth Receiver is right for you with its easy installation and intuitive controls.So you can enjoy your personal playlist and favorite podcast inside your car and vehicle.

How to Use:

Note:The User Manual could be downloaded at the part of Technical Specification on the product listing page.

1.Power on/off

Power on:Press the multifunction button about 3 seconds until the blue and red indicator lights start flashing alternately.

Power off:Press the multifunction button about 3 seconds until the blue indicator lights goes off.

2. Connect the receiver to your car stereo

With the 3.5mm studio adapter or the 3.5mm audio cable to connect your car stereo and Mpow.(If no sound,please make sure it is inserted completely).

3.Pairing:

Before using the receiver first time,please be sure to have it fully charged

Connect Mpow with your car stereo

Press the multifunction button about 3 seconds until the blue and red indicator lights start flashing alternately

Turn on the Bluetooth function of your phone

Search for the Bluetooth devices and select “MPOW”

If there is needs a code,please enter “0000”

If pairing is successful,the blue indicator light would flash slowly

Remark:

It would connect the last connected phone automatically when it turns on.(Please make sure the Bluetooth function is on.)

The Mpow does not turn on automatically when your car is starting.You need to turn it on manually.

Safety First

For the consideration of safety, please kindly do not use it when it is charging.

• ADVANCED BLUETOOTH RECEIVER: Mpow Bluetooth Car Adapter is not only for car,it is also could connect with your wired headphones via 3.5mm audio cable/adapter to help you enjoy the wireless Bluetooth headphones.
• DUAL CONNECTION: Mpow could connect two Bluetooth devices at once and the Bluetooth range up to 30 feet in open space without obstacles.
• EXTRA-LONG PLAY TIME: Built-in battery provides up to 10 hours’ play and talk time, 120 hours’ standby time, only takes 1.5 hours to fully charge it.（NOTE:Please be sure the charging input voltage to Mpow do not over 5V and do not use fast charger.）
• EASY CONTROL: You can answer phone calls or control music on the receiver. Change volume, play/pause/skip music, answer calls, redial the last called number with ease.( NOTE: This receiver doesn't turn on automatically with your car.)
• WIDE COMPATIBILITY: Compatible with most Bluetooth enabled devices like smartphone, MP3, tablet, etc, ideal for home or car audio systems.(NOTE: For using on TV by pairing Mpow with headset, please search Mpow transmitter or receiver/transmitter.)

User questions & answers

Question:	Could I use this device as a BT receiver with 3.5mm plugged into jack on a treadmill with built in speakers? And use a BT transmitter plugged into TV
Answer:	The USB / SD compatible video formats: AVI, 3GP, MPG, MPEG, RMVB, DAT, FLV, MOV, MP4, RM, XVID.
Question:	Is the 3.5mm male piece attached or can it be removed? I want to know if the actual receiver has a female input where I could plug in headphones
Answer:	You can pair our IR wireless headphones. DWH005: https://www.amazon.com/dp/B01M1RQBOS?ref=myi_title_dp DWH006: https://www.amazon.com/dp/B01LWXVAA7?ref=myi_title_dp
Question:	Can it charge while being used at the same time
Answer:	Yes it comes with a plate
Question:	do you have to manually turn it on, or can you use a power plug and have it automatically just work everytime
Answer:	Yes it has a pig tail for RCA plugs and to wire the speakers

• RX & TX MODE: The Bluetooth transceiver is a smart Bluetooth transmitter and receiver, supporting both Bluetooth receiving and transmitting, namely RX and TX mode. RX mode turns your old wired headphones, CD player, speakers or car/truck into Bluetooth function enabled. TX mode equips your desktop, TV and TV BOX with Bluetooth so that these equipment are able to connect your Bluetooth earphones speakers.
• MICROPHONE: Phone calls can be listened and answered easily and safely through the car’s stereo and the car audio adapter’s microphone, no need to dangerously take cellphone out from pocket or stand. Long press the phone/play key to activate the voice assistant of cellphone and talk to Ewin audio adapter’s mic to let your cellphone change a song, make a call, send a message etc, without using cellphone being much safer.
• 1 TO 2: In TX mode, the Ewin Bluetooth 5.0 transmitter can be paired with two Bluetooth headphones/speakers simultaneously. Note: if your devices’ Bluetooth’s edition is lower than 5.0, latency and connecting issue may exist. Please buy with caution
• LOW DELAY PURE STEREO: Please note that the effective Bluetooth distance is within 10m, if with Obtacle, effective Bluetooth distance is 5m. Aptx and DSP codec technology contributes to a richer and deeper stereo experience with low latency and high fidelity. Enjoy CD-like audio quality all the time.
• ALWAYS ON: EWIN 3-1 wireless audio adapter can still work while charging. Built in batteries for up to 7-8 hours use and automatic shutdown after no connection for 5 minutes.

User questions & answers

Question:	How can i connect this device from my pc to my iphone and from my iphone to airpods
Answer:	Do you understand how Bluetooth works? Its a means of connecting two items together via wireless technology. This not a means of daisy chaining things together.
Question:	Can I hook up my record player audio out to this to push the signal from my record player to a Bluetooth speaker
Answer:	It should work so long as your "audio out" jack accomodates a 3.5mm plug.
Question:	Can i use it to transmit music from my phone into the car's aux port
Answer:	Yes. Moreover, you can answer the phone call with the microphone built-in . That means you won’t need to take your cell phone out from your pocket, just answer the phone by this Bluetooth receiver.
Question:	The light flashes and I cannot connect
Answer:	You must double click to make it flash quickly. When it flash slowly, it does not enter into pairing status. Remember to double click the phone/play key!

Product features

Wide Compatibility

EWIN, a company dedicated to providing superior-quality, reasonably priced electronic products and accessories. We strive to develop, create and improve technology to make easy-to-use devices. This EWIN Bluetooth transmitter and receiver is our latest achievement, the phone call and voice assistant function of which is world-leading innovation.

The Ewin Bluetooth audio adapter is designed for TV, car, cellphone, tablet, computer, game console, wired speaker/headset and so on.

Safe Driving

Connecting your cellphone with car stereo by EWIN Bluetooth transmitter and receiver, you can do many things.

Play Music: Play your cellphone music on car’s stereo through Bluetooth.

Voice Assistant: Press the phone/play key for 3 seconds to activate the voice assistant of your cellphone, then talk to EWIN Bluetooth transmitter and receiver’s built in mic. In this situation, you can change a song, send a message, make a call and so on without taking the cellphone from your pocket and car stand, much safer for your driving.

Answer A Call: When a call is in, press the phone/play key to answer the phone call and press it again to end the phone call. Listen to the voice sending out from car stereo and talk to the microphone on the Ewin car Bluetooth adapter to reply. Better communication quality and much less distracted drving.

Perfect for TV

Upgraded EWIN Bluetooth transmitter can be paired with two Bluetooth headphones/speakers. Two family members watching TV in the living room with Bluetooth headphones won’t disturb the sleep of another family member in the bedroom. Two large Bluetooth speaker can stand in each side of the TV to achieve the sound balance and comfort.

The EWIN audio adapter continuously streams even while charging. No need to wait, no any interruption caused by charging. You can watch your TV all the time.

Kindly Note: For old TV without Aux jack, please use 3.5mm to 2-male RCA cable.

Newest Bluetooth 5.0

Low energy of Bluetooth 5.0 is designed to reduce the energy usage of Bluetooth peripherals and realize dual audio. With the latest Bluetooth 5.0 & CSR chip, this Ewin Bluetooth transmitter and receiver offers enhanced audio transmission, faster pairing, more stable wireless connection and wider compatibility with other devices.

Note: if your devices’ Bluetooth’s edition is lower than 5.0, latency may exist

Aptx HD Codec

Aptx is a proven technology that compresses and then decompresses audio as it travels from a source device like a phone, to a receiving device like a wireless speaker, in a way that it can be transmitted over Bluetooth without damaging the quality. This ensures that you get the very most from your audio. Aptx audio technology significantly reduces the latency to keep your audio and video in sync.

Dual Power

DC Mode: Connect to a quality USB charger, and stream the audio as long as you can. You can charge it while it's working

Rechargable Battery: Ewin Bluetooth audio adapter can provide approx 8-hour battery life, and can be fully recharged within approx 2 hours. It needs to be recharged ASAP when the LED keeps flashing red. The LED turns steady red while being recharged, and turns off once fully charged.