3 best mpow bluetooth audio receiver transmitters

Product description

Specifications

Bluetooth Version: 5. 0 Bluetooth

Solution: CSR8675 Product

Model: BH259

Bluetooth Range: 50feet

Bluetooth Protocol: A2DP / AVRCP

Battery Capacity: li-ion 250 mAh

Working Current: 20-30 mA < / p>

Working Voltage: DC 3.1 V-4.28 V

Frequency Range: 2.402 GHz ～ 2.480 GHz

Connection Method: 3.5mm Aux

Note

1. It's recommended to use headphones with the same chips when pairing to two headphones to prevent intermittent music, silent sound or disconnection, etc.

2. In Bluetooth transmit mode, the adapter can be paired with a Bluetooth headphone and Bluetooth speaker. It can't be paired with smartphones or other similar devices.

3. In RX mode, the transmitter and receiver cannot support hands-release calling because it has no mic function.

Packing

1 x User Manual

1 x Mpow Bluetooth Transmitter and Receiver

1 x 3. 5mm Female to 2 RCA Male Cable

1 x 3. 5mm Audio Cable

1 x USB Charging Cable

• [Transmitter & Receiver] Mpow 2 in 1 Bluetooth adapter can be used as either transmitter or receiver Support for pairing with 2 headphones/speakers simultaneously Auto pairing to the last device makes it easy for repeated use
• [Bluetooth 5 0 Audio Adapter] Built-in CSR8675 chip achieves enhanced Bluetooth 5 0 technology with faster transmission and more stable connection within 50ft range
• [aptX Low Latency&HD Audio] Achieve end-to-end audio transmission without lip-sync delay and offer you extraordinarily high definition audio which is better than CD
• [Longer Battery Time] Provides 12 hours of playtime after fully charged It's a great convenience to charge while using it
• [Easy to Use] One step to switch mode or turn on/off the adapter thanks to the simple 3-button design 3 indicators clearly show the pairing status the numbers of paring devices and the supported codec to keep you informed of the working status any time

User questions & answers

Question:	If I get two units, is it possible to set one as transmitter and another one as receiver then pair them with each other
Answer:	Yes, I got 2 units and they work for me. Very convenient.
Question:	What are the specs of the aux 3.mm input jack? my audio preamp has volume controlled rca preamp outs and fixed level rec outs... will either work
Answer:	In the manual the specs say the following: Codecs AAC/SBC/apTX Low Latency/apTX HD. I also have the Mpow Bluetooth headphones so this works good with them. Similar chip. I use to transmit from tv to transmitter to headphones.
Question:	I want to add bluetooth to my My tv and my speakers. Should I get 2 of these, one as transmitter for tv and another as receiver for speakers
Answer:	Normal - great Bluetooth connection - easy, Quick, no popping, voice message when connected - lasts for several days on a full charge
Question:	Does this support transmitting/receiving using the AAC codec
Answer:	Yes it will

Product features

Low Latency

1. About Low Latency Technology

Ensures audio-video synchronization during transmission. Mpow supports Low Latency.

2. Note:

It’s recommended to use headphones with same chips when pairing to two headphones to prevent from intermittent music, silent sound or disconnection etc.

High Definition

About HD Technology

Supports high-definition audio transmission with 'better than CD' quality. Mpow supports HD.

Audio Delay ???

Why is Audio Delay Still Noticeable?

Low Latency and HD need the support of both transmitting and receiving ends.

If the audio delay is still noticeable or the sound quality is so-so, please check whether your receiving device (Bluetooth headphone or Bluetooth music box) is compatible or not.

Product description

It is time to turn your old wired devices into wireless ones with upgraded MPOW Bluetooth receiver, enjoying your wireless life freely!

Premium Sound Quality:

MPOW Bluetooth receiver uses updated wireless technology to adapt audio systems, which is featured with Bluetooth 5.0 and CSR core for premium sound quality and stable transmission. The small and lightweight device enables you to enjoy clear music freely and wirelessly.

Wide Compatibility:

Compatible with iPhone, iPod, iPad, Android Smartphones, Tablets, and other Bluetooth-enabled electronical Devices, ideal for any powered Car with AUX interface & Home Stereo Sound System and Speakers via the 3.5 mm audio cable/adapter.

Easy to Operation and Auto-repair:

Just switch on the key button, and plug in your devices without Bluetooth. Then pair on your smartphone and play the music. You don’t need to repair your devices every time, MPOW Bluetooth receiver can be repair automatically.

Specifications:

Connection Technology: Bluetooth 5.0 and CSR Core

Bluetooth Range: 66 Feet

Charge Voltage: DC 5.0V Usage Temperature: 0-45℃ / 32-113

Package Included:

1 × Bluetooth Receiver

1 × USB Charging Cable

1 × 3.5mm Audio Cable

1 × 3.5mm Male to Male Connector

1 × User Manual

• SOLID CONNECTION : Mpow Bluetooth audio adapter equipped with Bluetooth 5.0 technology and CSR chip to ensure instant pairing and maintains a strong connection up to 66 ft.
• AMAZING SOUND QUALITY: Thanks to the Bluetooth 5.0 Mpow can turn your older stereo into a nifty Bluetooth capable one. You can enjoy the Hi-Fi music streaming by connecting Mpow Bluetooth receiver to non-Bluetooth car/home stereos system.
• LONGER BATTERY LIFE: Enjoy wireless music for longer with this rechargeable wireless Bluetooth receiver's extended 12 hour battery life.
• EASY TO USE & NO CORDS: Simple button interface. Designed with ON/OFF slider switch for getting rid of long press. 3.5mm male to male connector to get rid of the wire bonds, but without compromising sound quality. Only you and music, pure and simple.
• WORKS FLAWLESSLY REGARDLESS OF DEVICES USED: With this sweet adapter you are able to enjoy the old stereo(such as car/wired speakers/wire headphones, etc) again with the modern "Bluetooth" tech through your cell phone.

Product features

Advanced Bluetooth 5.0 & CSR Chip

With the latest Bluetooth 5.0 & CSR chip, this Mpow Bluetooth receiver offers enhanced sound transmission, faster pairing, more stable wireless connection and wider compatibility with Bluetooth enabled devices.

We are making music playback and conversations smoother and clearer than ever. Make your lifestyle cool with Bluetooth 5.0.

Convenient Hands Release Calling & Voice Assistant

1. Built-in microphone for Hands Release calling
2. Supports voice assistant for match your smart life and safer driving.
3. Noise Cancelling microphone technology gives you a clearer phone communication.

Long Wireless Streaming Range

Stable and fast wireless signal transmission with Bluetooth 5.0 technology and CSR high efficient chip:

1. Music streaming from up to 66 feet+ away
2. Hands Release calls from 33 feet+ away

Long Battery Life

1. 12 hours of wireless music playing
2. 10 hours clear Hands Release calls

Note: In order to save power: The LED indicator turns off in 10 seconds after connected (but you can press any key to activate).

After 10 minutes, if there is no connection, it will automatically shut down, so you need to restart / boot to reconnect.

Easy to Use

1. Compact audio jack design for convenient use
2. Smooth slide switch for easy operation
3. Multi-Function Button for Play/Pause/Answer or End calls
4. Next/ Previous Track: Click one the “+”/ “-“
5. Built-in microphone for Hands Release calling
6. Round jade-like touch with white-loop LED indicator

Small and light design

Mpow Bluetooth Receiver is compact, wireless, and made to go with you anywhere to keep your music going on the move with no reduction in functions.

Product description

Q1: What is the Function of a Bluetooth Receiver?

A1: It's for enabling Bluetooth function on non-Bluetooth car/speaker/earphones so you can enjoy wireless music from a smartphone.



Pairing Steps:

1. Plug Mpow BH129 into your non-Bluetooth car/speaker's 3. 5mm aux port

2. Power on Mpow BH129 Bluetooth receiver

3. Enable Bluetooth on your phone, search and connect to "BH129"

4. After connecting Mpow with your phone, start to enjoy wireless music

5. NOTE: If you want to transfer the audio signal to your Bluetooth Devices like Bluetooth Headsets/speakers from TV/PC, you could search and connect Mpow Bluetooth Transmitter on those devices.



Q2: How to charge Mpow 129? Can I use it while charging?

A2: 1. Charge with the equipped micro USB charging cable. After fully charged, the indicator light would turn off.

2. BH129 also could be used while charging, however, there might be some current noises and a ground loop noise isolator would remove it.



Q3: Does it turn off automatically after being disconnected for a while?

A3: 1. When BH129 is left not streaming for 10 minutes, it will automatically enter sleeping mode with the indicator lights off to save power; then if you want to reconnect BH129 please short press any button to active paring mode with the indicator flashing blue and red alternately.

2. NOTE: If you want to turn BH129 off, please turn it off manually.

3. NOTE: It would not turn on automatically even at the Sleeping Mode.



Q4: Why Mpow BH129 Bluetooth Receiver could not auto re-connect to my phone?

A4: 1. Mpow could auto re-connect to the LAST paired Bluetooth device after rebooting.

2. NOTE: If your BH129 is in sleeping mode, you need to wake it by pressing any button to active paring mode with the indicator flashing blue and red alternately.

3. NOTE: If you turn off the Bluetooth on your phone last time connected to BH129, it requires manually connecting BH129 on your phone.

• MPOW FLAGSHIP BLUETOOTH 5.0 ADAPTER: Designed perfect for non-Bluetooth car/home stereo system with 3 5mm aux port to be Bluetooth enabled (If you want to connect to TV by pairing Mpow with Bluetooth headsets please search Mpow Bluetooth Transmitter ).
• CSR CHIP FOR CD-LIKE MUSIC FEAST: Adopted CSR chip for providing more stable and faster transmission with less power consumption which can represent a superior audio performance to spoil your ear and never feeling boring while driving.
• BUILT-IN MIC FOR SAFER HANDS-FREE CALLS WHILE DRIVING: Just press the answer button to answer or hang up your phone calls while driving (If you use Mpow-129 with wired headphones please answer with your headphones ).
• DUAL LINK FOR MORE CHOICE: Mpow can connect 2 Bluetooth devices at the same time for enjoying your music and won't miss any calls Or enjoy music and navigation at the same time 15 HOURS long battery life and also supports playing while charging.
• 1 SECOND SWITCHING BUTTON: Mpow Bluetooth car aux adapter designed with PHYSICAL ON/OFF SWITCH & HUMANIZED WIDENED VOLUME/TRACK BUTTON on the side for quick and convenient control for your hands-free talking and listening experience.

Product features

Safer Speakerphone Calls

After connecting to the car stereo, you can play/pause the music or answer/reject a call by easily click the multi-function button on the receiver, no need to hold the phone while driving.

Dual Connection

Mpow can connect 2 Bluetooth devices at the same time for enjoying your music and won't miss any calls.

Bluetooth 5.0 chip provides better wireless performance.

Note: The distance between Mpow and your Bluetooth devices should be within 3 feet and it may take 5-30 seconds to complete the connection.

Fast Reconnection

Switch the special button to control on-off.

After powered on, it will automatically connect to the last paired Bluetooth device.

No need to repeat the tedious pairing process after getting on the car.

Note: Mpow just could reconnect the last paired Bluetooth device automatically while pairing mode.It requires that BH129 and the Bluetooth on your device are both turned on.

One Click to Wake Voice Assistant

1. Press the MFB for 1 second to wake or end the voice assistant on your phone.

2. Using voice assistant for safe driving

3. This function is applicable to Siri, Google Assistant or other voice assistants on Android devices

15 Hours Long Battery Life

To fully charging 2 Hours for 15 Hours music enjoyment or 120 Hours standby time.

Note:

1. If you want to turn Mpow off,please kindly turn the switch to off for It won't turn off automatically.

2. Please be sure the charging input voltage to Mpow do not over 5V and do not use fast charger.

Safe Using While Charging

1. Stop Charging after Fully Charged After the product is being fully charged, the charger should be unplugged in time. Overcharging for a long time may damage the positive electrode of the battery, which will damage the negative pole of the battery and shorten the battery life.

2. Charge in Time After the battery of the product runs out, please charge it as soon as possible. Otherwise, it may cause the remaining power in the battery to be discharged quickly, which will damage the negative pole of the battery and shorten the battery life