5 best bluetooth receiver for tv

Product description

TX mode:

In the TX mode, the Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to RCA connectors and AUX connectors, therefore, please kindly have a check see whether your audio sources have one of these kinds of jacks. Please note that the adapter should be plugged into the “L&R AUDIO OUT” jack or the “AUX OUT” jack on the audio source but not the “Component IN” jack.

RX mode:

In the RX mode, the Bluetooth adapter could be used as a Bluetooth receiver to non-Bluetooth stereos such as wired headsets or wired speakers. Pair the Bluetooth receiver with your cell phone, and plug your headsets into the jack on this unit, then you will be able to hear the music from your phone.

NOTE：

If the TV does not have the “AUX OUT” jack or the “L&R AUDIO OUT” jack, a headphone jack should also work.

If the TV only have a “DIGITAL AUDIO OUTPUT (OPTICAL)” jack, a convertor is needed or you could choose another model of TaoTronics Bluetooth Transmitters, TT-BA09, which is supported to both aux audio output and optical audio output.

Not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc.)

What is In the Box:

1 x TaoTronics Bluetooth 5.0 2-in-1 Adapter (Model: TT-BA07)

1 x 3.5mm Audio Cable

1 x 3.5mm Female to 2 RCA Male Cable

1 x USB Charging Cable

1 x User Guide

• LOW DELAY: Low Latency for High-fidelity Stereo Sound, lag-free content streaming in transmitter mode. Low Latency supported Bluetooth headphones/speakers are required.
• MAKE IT TWO: Upgraded 2-in-1 Bluetooth V5.0 transmitter can be paired with two Bluetooth receivers (like headphones + speakers) simultaneously. Note: Low Latency does NOT support Dual Link mode.
• ALWAYS ON: TaoTronics Bluetooth 2-in-1 Adapter continuously streams even while charging. Built-in battery for up to 10 hours use - enjoy your favorite wireless content all the time.
• BLUETOOTH EVERYWHERE: In Transmitter mode, turn a non-Bluetooth TV, PC, CD player, iPod, MP3 / MP4 into Bluetooth transmitter. Receiver mode: Ideal for home or vehicle music streaming sound system.
• PURE SOUND: high definition codec for a richer and deeper sound experience. Listen to CD-like audio quality at no compromise. Plus, 12 + 18 month extended warranty and 24/7 friendly customer service

Product features

TaoTronics Bluetooth 5.0 Transmitter & Receiver

Unlock the full potential of your devices with TaoTronics Bluetooth 5.0 transmitter, adopting Low Latency technology to deliver high-fidelity stereo sound with no delay. Confidently & seamlessly stream music from your phone/tablet to wired headphone/speaker.

Bluetooth 5.0

Ensures stable transmission to Bluetooth devices from up to 10m/33ft.

Play While Charging

Safely charge the transmitter & stream music for long periods.

One Button Control

Easily switchbetween transmitter (TX) & receiver (RX) mode.

Product description

2-in-1 Bluetooth Transmitter & Receiver, Small & Unique Compact Design

TX Mode as Bluetooth Transmitter - Adding Bluetooth function to TV, DVD, PC or any audio source device, streaming high quality audio to Bluetooth headphones / Speaker.

RX Mode as Bluetooth Receiver – Turn your wired speaker / Headphones / Car stereo into Bluetooth wireless and then pair your Smartphone, enjoy Hi-Fi music wireless.

NOTE: This adapter won't be able to transmit and receive audio simultaneously.



Great Battery Life for More Fun

An extra-long battery life of 14 hours means you can enjoy music for almost the entire day before the next recharge.



Work While Charging

Non-stop streaming as you can use it while charging. Even better is that it will automatically re-pair every time you use it.



Re-connection Automatically

When you back, BTI-018 can be automatically re-paired and connected to the paired device whether in TX or RX mode.



Frequently Asked Questions:



Q: The Bluetooth Transmitter can not connect with the wireless Headphone?

A: Please slide the BTI-018 to TX Mode, then long press the MFB button to enter pairing mode with blue led flash, open the bluetooth headphone and enter pairing mode to pairing, once connect success, the LED will stay on blue



Q: Can not work with your TV?

A1：Please check your TV back panel make sure the Aux(headphone jack)/ Red and white RCA port is AUDIO OUTPUT port.

A2: If the TV back panel only has the Optical port, then you need to buy one Optical to Aux Converter ( make sure your TV can do the PCM/LPCM setting before you buy this).

• ➤【2-IN-1 BLUETOOTH TRANSMITTER RECEIVER】As a Bluetooth Transmitter:Connects TV/PC via 3.5mm or RCA and streams audio to your AirPods Bose Sony TWS Bluetooth headphones or speakers in TX mode; As a Bluetooth Receiver: Receives audio from smartphones, laptop, or iPads and tablets when set in RX mode. Note: Please close the Bluetooth function of other around device during use avoid BTI-018 or your Headphone connect with them.Can‘t be used as both a transmitter and a receiver
• ➤【NO LIP-SYNC DELAY】 Aux to Bluetooth transmitter receiver support Low Latency to reduce audio-visual delay about 40 milliseconds, so you can enjoy TV / Movie / Video and listen with high clarity stereo sound. It can automatically reconnect to the last paired device easily once power on.* NOTE: To achieve low latency, your receiving device must also support Low Latency.
• ➤【DUAL STREAM & MULTI-POINT】As a Bluetooth audio transmitter, BTI-018 can be paired to two Bluetooth Headphones or speakers, and streams audio simultaneously to both of them. As a Bluetooth Receiver, it can still be paired to two of your smartphones or tablets, but the receiver can only receive the audio from one of the two paired devices.We suggest to pair two same brand audio receiving devices that both achieve Low Latency to enjoy no lip-sync delay.
• ➤【LONG BATTERY LIFE& AUTO-RECONNECT】Bluetooth Audio Transmitter for projector BTI-018 built-in Rechargeable 280mAh battery provides up to 14 hours working time, support charging and streaming at the same time, and automatically re-pair with existing paired devices.
• ➤【STOPPED WORRY ABOUT DISTURBING OTHERS & 24 MONTHS WARRANTY】Whether you are watching your favorite show on TV or playing games on your PC late at night or want a higher volume, with our Bluetooth transmitter set you won't disturb your family members. 24-months warranty and life time product technical service give you a safe and secure shopping experience.

Product features

No More Delay

• Faststream low latency technology support you enjoy end-to-end audio transmission speed. While you play games, watching Live TV matches, movies, the Low Latency delivers the smoothest and immersive audio for you.
• Note: this transmitter do not support Voice Chat!

Pairing to 2 Headphones

• Easily add a 2nd pair of headphones to the Bluetooth Transmitter BTI-018 to watch TV / movies with a family member or friend.(TX mode)
• Connect two smartphones, iPad (RX mode) at the same time to stream audio.

Perfect for Gaming

• Ideal for PC/ TV use since it supports AUX/ RCA audio output. And AirBTI-018 can provide up to 16+ hours playing time with only 2 hours for full charging.
• Note: this item do not support Voice Chat!

Use as Bluetooth Transmitter

TX Mode:

• Use as Bluetooth Transmitter adding Bluetooth function to TV, DVD, PC or any audio source device, streaming high quality audio to Bluetooth headphones / Speaker.

Use as Bluetooth Receiver

RX Mode:

• Wireless transfer audio from your Bluetooth-enabled phone/PC/ Laptop to your non-Bluetooth headphones/speakers/car stereo system via 3.5mm audio cable/ RCA cable.

Play While Charging

• Safely charge the transmitter & stream music for long periods.
• Take only 2hrs to fully charge it
• If charge it whiling streaming, BTI-018 will turn off automatically, please turn it on again to use it

Product description

Enjoy the sweet sound of vinyl, or streaming from your digital music collection. The perfect match for music lovers seeking a stereo system with classic sound from all your music sources. And with the low-profile design, it’s sure to fit into conventional AV cabinets. Power Requirement - AC 120 V 60 Hz.

• Amplify and enjoy your home audio experience in the comfort of your home
• 100 watts x 2 (8 ohms, 1 Kilo Hertz). Speaker impedance - 6–16 ohms
• Phono input, 4 stereo RCA audio inputs, 3.5 millimeter input, stereo RCA output
• Built in Bluetooth lets you wirelessly stream your favorite music service, podcasts, and more from other Bluetooth devices.
• Connect up to 4 speakers; A/B switching to play all at once, or in separate zones
• Low profile design (5 ¼ Inch tall) fits easily into conventional AV cabinet
• FM Radio with 30 station presets;

User questions & answers

Question:	Can I play my cds on this thing
Answer:	(1) I need a receiver that will accept wiring (not RCA plugs) into the 4 speaker connections. Will this receiver do that? (2) I also have a CD player. Can I connect my audio connections (2) to the receiver? (3) Directions say I can connect all 4 speaker connections (A & B) to play in 1 room. Is this true? Earl
Question:	with of device
Answer:	Hi Joseph, The width of this unit is approximately 430 mm(17 inches). And on a side note, the soundstage you’ll enjoy is much wider!!! -Sam
Question:	can i connect my tune table to this receiver
Answer:	Hi stephanie w, Yes, you can directly connect your turntable to this AV Receiver. Regards, David
Question:	What is the Bluetooth range
Answer:	Hi Gail Crawley, the maximum range is approximately 30 m (98.4 feet). For reference, please check the manual: https://docs.sony.com/release//Manual_4726907111.pdf see page 37. -Erin

Product description

Transmitter Mode(TX)

Make your non-Bluetooth devices, such as old TVs and PCs, Bluetooth-enabled to wirelessly transfer the audio to Bluetooth headphones/speakers.



Receiver Mode(RX)

Make your speaker or AV receiver Bluetooth-enabled to receive wireless streaming music from your phones or PCs. The RX mode is ideal for the home stereo system.



Dual Antenna

Dual antennas enhance Bluetooth signal and transmission range. The transmission distance in transmitter mode can reach 60m, and the receiving distance in receiver mode can reach 50m. (The operating range can be affected by physical obstacles or wireless interference.)



Aux Connection

When the AUX indicator is on, the 3.5mm AUX cable is required to be used for connection, otherwise the product cannot work normally.



OPT Connection

When the OPT indicator is on, the Optical Fiber cable is supposed to be used for connection, otherwise the product will not work normally.(The volume button is only effective on the AUX Connection, NOT available for optical connection.)



Dual Pairing

In transmitter mode(TX), BT5809 can be paired with two Bluetooth headphones at the same time to share your favorite music or movies;

In receiver mode(RX), two phones can be connected to the BT5809 to switch between different music sources (you can pause the music on one phone and play the music on the other.)

• BLUETOOTH 5.0 VERSION - Provides optimum transmission efficiency, stability and ultra-low power consumption. Supports A2DP, AVRCP, SBC, APTX, aptX-LL, and aptX-HD multiple decoding; Equipped with HD lossless decoder, bringing a “better-than-CD” listening experience to you
• 3-in-1 TRANSMITTER and RECEIVER - Transmitter mode: add Bluetooth function to non-Bluetooth device, turn a non-Bluetooth TV, PC, CD, MP3 / MP4 into a Bluetooth transmitter, transmit audio to Bluetooth headphones or speakers; Receiver mode: Convert old stereo or wired headphones to a wireless Bluetooth devices, pair with smart phone or tablet, enjoy music or audio by a easy cable-free solution; Bypass mode is also supported.
• EXTENDED LONG RANGE - Equipped with external dual antenna; The maximum transmission distance in transmitter mode is up to 60m/197ft; The maximum receiving distance in receiver mode is up to 50M/164ft(Note: The operating range can be affected by physical obstacles or wireless interference)
• STRONG COMPATIBILITY - An Ideal Bluetooth transmitter for tv, supports digital optical/AUX/RCA multiple audio output, compatible with 99% of the TVs on the market; Supports volume addition and subtraction for devices without volume control (such as AirPods); Supports pairing two headphones simultaneously
• IN THE PACKAGE - ZIOCOM Bluetooth Transmitter Receiver x 1, 3.5mm Audio Cable x 1, RCA Cable x 1, Digital Optical Cable x 1, USB-C Power Cable x 1( the power adapter is not included). Any questions about this Bluetooth device, please feel free to contact with our customer service and we will provide technical support

Product features

Question & Answer

1.How to switch to TX/ RX ?

• Long press the Button " M ",it will change to the "TX", "RX" and "Bypass". ( the corresponding indicator will light up )

2.How to switch to the AUX output or Optical output ?

• Long press the 3rd button to choose the "AUX" or "OPT". ( the corresponding indicator will light up )

3.Bluetooth cannot connect, but no sound ?

• Please make sure the TX/RX mode is selected correctly and choose the right the audio output mode (you can refer to the manual or product details page, or contact customer-service for help)

4. Can't adjust volume ?

• The volume button is only effective on AUX connections, the volume button is not available in optical mode.

5.How to connect two device at the same time ?

• No matter it is RX or TX mode, when power on, press the button " A " to pair to the first device, then press the button " B ", you can pair to the second device.

TX Mode for TV

TX means transmit mode, make your non-Bluetooth TV/computer have Bluetooth function, and then receive the Bluetooth audio signal from the TV through the Bluetooth headset

• STEP 1: Power On.

There is no built-in battery, you should connect the product with Type C to USB cable to get power supply. (The power adapter is not included in the package.)

• STEP 2: Select TX Mode

If the "TX" light up,that is transmitter mode; If not, please long press the Button "M" to change to "TX" mode.

• STEP 3: Choose Audio Input Cable

"AUX": If you use 3.5mm audio cable or RCA cable, please switch to AUX mode on the display.

"OPT": If you use optical fiber cable, please switch to OPT mode on the display.

Long press the 3rd button to change between "AUX" and "OPT".

• STEP 4: Pair to your Bluetooth headphone or Bluetooth speaker

Press the button "A" to pair your first Bluetooth headphone. If you want to pair to your second Bluetooth headphone, please press the button "B".

RX Mode for Speakers

RX means receiving mode, make your non-Bluetooth speakers have Bluetooth function and can receive Bluetooth audio signals from mobile phones/tablets.

• STEP 1: Power On.

There is no built-in battery, you should connect the product with Type C to USB cable to get power supply. (The power adapter is not included in the package.)

• STEP 2: Select RX Mode

If the "RX" light up,that is receiver mode; If not, please long press the Button "M" to change to "RX" mode.

• STEP 3: Choose Audio Input Cable

"AUX": If you use 3.5mm audio cable or RCA cable, please switch to AUX mode on the display.

"OPT": If you use optical fiber cable, please switch to OPT mode on the display.

Long press the 3rd button to change between "AUX" and "OPT".

• STEP 4: Pair to your Cellphone

Press the button "A" to pair your first device. If you want to pair to your second device, please press the button "B".

Transmitter Mode(TX)

Make your non-Bluetooth devices, such as old TVs and PCs, Bluetooth-enabled to wirelessly transfer the audio to Bluetooth headphones/speakers.

Receiver Mode(RX)

Make your speaker or AV receiver Bluetooth-enabled to receive wireless streaming music from your phones or PCs. The RX mode is ideal for the home stereo system.

Extended Range

Dual antennas enhance Bluetooth signal and transmission range. The transmission distance in transmitter mode can reach 60m/197ft, and the receiving distance in receiver mode can reach 50m/164ft. (The operating range can be affected by physical obstacles or wireless interference.)

Dual Pairing for RX

In receiver mode(RX), two phones can be connected to the BT5809 to switch between different music sources (you can pause the music on one phone and play the music on the other.)

Dual Pairing for TX

In transmitter mode(TX), BT5809 can be paired with two Bluetooth headphones at the same time to share your favorite music or movies.

In the Package

Bluetooth transmitter receiver x 1; Optical cable x 1; 3.5mm audio cable x 1; RCA cable x 1;USB power cable x 1. (Please note: the power adapter not included)

• 【VERSATILE TRANSMITTER / RECEIVER】1Mii B03 Bluetooth transmitter/receiver allows you to take advantage of cutting edge Bluetooth 5.0 technology to stream all your favorite music from any cellphone, tablet, laptop or desktop to your favorite sound system you already own. The B03 Bluetooth adapter can also be used to connect Bluetooth speakers or headphones to your existing TV. This means you don’t need to buy another TV just to be able to enjoy the wireless freedom of Bluetooth.
• 【UNIQUE FEATURE】If you have a family member who has weak hearing and needs a high volume when watching TV, B03 is your best choice. It supports to stream audio to wireless headphones and wired TV soundbar at the same time under TX mode, so you can share the TV together, and will not be affected by the different needs of the TV volume. This is a unique feature!
• 【LONGER RANGE, STRONGER CONNECTION】 Longer range means stronger connection, audio won’t cut in / out easily. 1Mii long range Bluetooth adapter tested can achieve a range up to 230ft (70m) line-of-sight in open air and up to 80-110ft (25-35m) indoors. you will still be able to enjoy the safety and security of having your cellphone in your pocket while you listen.
• 【CRYSTAL SOUND, NO DELAY】AptX Low Latency and AptX HD technology eliminate Bluetooth audio delay, B03 can works with 2 Bluetooth headphones / speakers simultaneously, BOTH enjoy ultra-fast, high fidelity audio.
• 【MULTIPLE CONNECTION】The B03 Bluetooth aux adapter has both analog and digital audio inputs / outputs giving you the most flexibility and quality for connecting to your audio system. B03 Bluetooth adapter is compatible with 99% TV’s and home stereo systems. NOTE: For TV optical output - pls set audio format to PCM. Dolby / DTS are not supported.

User questions & answers

Question:	is it compatible with miracast like screen share to my smart tv
Answer:	You can connect to your TV via a HDMI cable
Question:	What year was this model released? Please advise. Thank you
Answer:	2020
Question:	Is this laptop zoom compatible
Answer:	Absolutely
Question:	Does it come with anti virus program
Answer:	yes but you have to buy it after a period. I use the included microsoft windows defender, which is as good IMHO and is more up to date and is included as part of windows 10

Product features

Share TV, Double Happiness

Connect 2 headphones or speakers at the same time, sharing TV with family/friend/lover with this TV Bluetooth audio transmitter. You are NO LONGER AN ISLAND at this moment.

No Delay, Joy Smooth

Supports the aptX Low Latency codec to virtually eliminate audio-visual lag making B03 Bluetooth adapter an ideal choice for watching TV / movies. For best results, use with aptX Low Latency supporting headphones / speakers

Long Range, Stronger Connection

Dual antenna design amplifies the TV signal so you can hear the TV from anywhere in the house. Experience wireless freedom anywhere anytime.

Transmitter

Use 1Mii B03 as a Bluetooth Transmitter to Bluetooth-enable your TV, AV Receiver, Radio and other home audio source devices to stream music to your Bluetooth headphones or speakers.

Even more, You can hear from Bluetooth headphones and Wired Soundbar / speaker simultaneously. This is a unique product Feature!

Bypass

Bypass connects an input directly through to the connected output, and the BT03Pro+ will neither transmit nor receive.

If you have only one opt output from TV, and it is currently used by your AV receiver or soundbar, Bypass function is your choice. In this way, you can use / not use Bluetooth by a simple switch without plugging and unplugging B03 each time.

Receiver

Use 1Mii B03 as a Bluetooth receiver, to Bluetooth-enable your old home stereo or AV Receiver and wirelessly stream music from your cellphone/PC.