Product description

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP444 is perfect for bringing your studio equipment's phono-level output to a more suitable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it's a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP444 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP444 Preamplifier. Features: Converts Phono Signals to Line Level Signals State-of-the-Art Circuitry Accommodates Magnetic Pickups Ultra-Low Noise Operation Improves Sound Performance Connects to Turntables and Other Studio Equipment Input Sensitivity: 3mV at 50K Ohms (Phono) Dedicated RCA and 1/4" Output Connectors Output: 2V max (P-P) at 10K Ohms DC 12-Volt Power Adapter Included Frequency Response: 20 Hz ~ 20 KHz ±2dB S/N Ratio (A-WTD): 70 dB - Output Level: 2V THD: 0.08% @ 1KHz and 3mV Input | S/N Ratio: 70dB Input Sensitivity/Impedance/Phono 3 mV/50K Ohms Load Impedance: 10K Ohms - Reference Voltage: 1V d Dimensions (W x H x D): 3.54" x 2.13" x 1.02" Sold as: Unit Weight: 0.85 lbs.

From the Manufacturer

&

	PP444	PP555	PP999	PHE300	PHE400
	Turntable / Phono Pre-Amplifiers			Noise / Hum Eliminators
Jacks	RCA & 1/4''	RCA & 1/4''	RCA	1/4'' TRS	1/4'' TRS & XLR
12V DC Adaptor	✔	✔	✔

• CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms
• LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers The output is 2V max (P-P) at 10K Ohms It’s better to position the preamp close to the source to reduce unwanted noise and interference
• CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music For the receiver, this can be connected to speakers, computers, laptops and more
• SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA outputs
• 1 YEAR WARRANTY: We guarantee this electric phono preamplifier with both a 30 day no hassle money back return policy and a 1 year manufacturer’s guarantee

User questions & answers

Question:	Does this thing have an/off switch or do you need to plug/unplug everytime you use it
Answer:	no switch. You can plug/unplug, I leave it plugged in all the time.
Question:	Unit works fine for awhile and then starts outputting static, even with no input connected. I've tried it with several amps with the same results
Answer:	Most likely people who are having noise problems it is because of ground loop isolation problem. If you have a ground loop isolation problem grounding the preamp box is unlikely to help. Without getting technical, what you want to buy is a ground loop isolator or a humm eliminator; both the ground loop isolator and humm eliminator tackles the cause of the noise at the fundamental source of the problem, depending on your audio setup, one maybe easier to use than the other. To use the ground loop isolator or the humm eliminator they generally come with instructions, or you can google this topic. If the noise in your audio system isn't fixed by using this solution the first time, try putting the ground loop isolator and humm eliminator at various points in your audio system. Also you can talk to audio people and get advice about how to fix ground loop problems from people who setup big audio systems, for concerts and such; if you talk to the average electronic garage shop audio enthusiast you are likely to get bad advice, i.e., meaningless explanations. Also caution must be used when Googling this topic, much of the discussion, advice and explanation on this topic is bogus, you can get a general correct feel of this topic if you read a number of explanations. Also one more thing that can cause a "popping noise" is that you have too much gain, this is a phono amp and the gain is huge, it takes a 3mV and makes it 2Vp-p this is a gain of around 100 to 200, if you gain up the audio signal too much then the signal out of your amplifier runs out of head room and clips, this can cause a popping sound, essentially you have too much gain. If this is occurring you need to either buy a preamp with less gain or attenuate the signal before it gets to the preamp. If this is a problem, too much gain, you can buy preamps with gain control.
Question:	My turntable has very quiet output. Will this device help boost the volume
Answer:	Yes, indeed. If your need was like mine (no built-in pre-amp on the turntable and no specifically dedicated phono input on your amplifier) you will find this unit to be the perfect solution to needed amplification of the turntable's output. Don't forget to hook up the ground wire as directed or you may wind up putting unwanted noise into the audio.
Question:	My amp DOES have a Phono Input, but my cartridges are low output. Can I use this to boost the signal using the Phono Input to reduce audible hiss
Answer:	No, you can't. This is a phono preamp with RIAA playback equalization that amplifies the signal about 100 times, so it essentially does what your built-in phono preamp does. The output signal from the separate preamp is equalized to a nominally "flat" frequency response and the amplified signal level will overload and probably damage your built-in phono preamp. Plug it into any other stereo line input on your system (AUX, CD, DVD, TAPE, VCR, etc.), but NOT the PHONO input! If you need higher signal gain, maybe look at phono preamps from ART or TCC that have output level controls. If you use moving-coil (MC) cartridges, you need a preamp specifically designed for them...they require at least 55 dB (over 500 times) signal gain vs. about 40 dB (100 times) for moving-magnet (MM) cartridges. Noise becomes a critical issue with MC cartridges because of their extremely low signal output, so good-quality cables and good turntable grounding are essential.

Product features

Pyle Phono Turntable Preamp Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter

• Converts Phono Signals to Line Level Signals
• State-of-the-Art Circuitry Accommodates Magnetic Pickups
• Ultra-Low Noise Operation Improves Sound Performance
• Connects to Turntables and Other Studio Equipment
• Input Sensitivity: 3mV at 50K Ohms (Phono)
• Dedicated RCA and 1/4'' Output Connectors
• Output: 2V max (P-P) at 10K Ohms

• DC 12-Volt Power Adapter Included
• Frequency Response: 20 Hz ~ 20 KHz ±2dB
• S/N Ratio (A-WTD): 70 dB - Output Level: 2V
• Input Sensitivity/Impedance/Phono 3 mV / 50K Ohms
• Load Impedance: 10K Ohms - Reference Voltage: 1V d
• Dimensions (W x H x D): 3.54" x 2.13" x 1.02"

Product description

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card.



Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.

• Dual RCA-type inputs
• Dual RCA-type outputs
• Ground terminal
• Power: 12V DC (Adapter included)
• Dimensions: 1.75 H x 4.2 W x 3.5 inches D (44.5 x 107 x 89mm)

User questions & answers

Question:	Would a jensen jta-230 3 speed stereo turntable work with this
Answer:	Hi, customers. Please press and hold the middle button for more than 5 seconds until the blue light of the button flashes, which is to restore the factory settings.
Question:	does this unit have an on/off stwich
Answer:	It is a plug-in power supply, to an electrical outlet, then to operate on a cell phone or computer.
Question:	how do i know which capacitance option to use (100pf or 200pf
Answer:	Cannot get it to work. Directions not in English.
Question:	Is this what I need to plug an older turntable into a new receiver/amp that does not have a phono jack? When I plug in AUX, there is no sound
Answer:	This is a USB power supply through the computer, laptop, and used for office, entertainment, learning a Sound Bar speaker, 6W power, clear sound, to meet the general needs of the game sound is a good choice, and it saves space, not messy desktop.

Product features

DJPRE II

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card.

Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.

ARTcessories

ARTcessories are taking the audio world by storm and quickly becoming a popular brand with musicians, DJs and studio engineers everywhere around the World. Split, combine, mix, power... you name it. On stage, in the studio, in your living room, they’re easy to use and are built to last. For those times when you need a little box to fix a big need or to make more out of a smaller project, ARTcessories has you covered. You’ll discover a robust line of useful tools which include a complete range of direct boxes, headphone amps, small mixers, mic cable combiner/splitters and much more. ARTcessories are designed to deliver affordable solutions for a multitude of audio needs for any size project.

Product description

PylePro Model : PP999

Compact Ultra-Low Noise Phono Turntable

Compact Ultra-Low Noise Phono Turntable Preamp with 12-Volt Adaptor - Preamplifier

Converts Phono Signals to Line Level Signals

12-Volt DC 110V Adaptor Included

Dedicated RCA Connectors

Output Level: 2V

Reference Voltage: 1V

Load Impedance: 10K Ohms

S/N Ratio (with A-WTD): 70 dB

T.H.D. : 0.08 for 1 KHz 3 mV Input

Frequency Response:20 Hz ~ 20 KHz ±2dB

Input Sensitivity / Impedance / Phono - 3 mV / 50K Ohms

Dimensions (W x H x D):3.54'' x 2.13'' x 1.02''

Weight : 0.88 Lbs

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP999 is perfect for bringing your studio equipment's phono-level output to a more suitable and manageable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP999 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP999 Preamplifier.

From the Manufacturer

&

	PP444	PP555	PP999	PHE300	PHE400
	Turntable / Phono Pre-Amplifiers			Noise / Hum Eliminators
Jacks	RCA & 1/4''	RCA & 1/4''	RCA	1/4'' TRS	1/4'' TRS & XLR
12V DC Adaptor	✔	✔	✔

• CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms
• LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference
• CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more
• SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs

User questions & answers

Question:	If I have a record player without a Preamp, will this help me with hooking it up to a Sonos
Answer:	You can hook it up to anything with a red and white connection. Or if you get the rca to 3.5mm jack then you can hook it up to anything with an input slot. I used this on my realistic lab 440 which doesn't have a preamp. Once I connected the ground from my turntable into the ground slot on this amp, my music sounded loud and clear.
Question:	mp
Answer:	Turntables (with typical magnetic cartridges) have very low signal output (a few thousandths of a volt). Records have the bass reduced to provide enough room on the surface for the recorded grooves, and the treble boosted to reduce the surface noise level when played back. A phono preamplifier performs two jobs: - It boosts the small signal from the turntable by about 50 to 100 times (producing a "line level" signal) so it can be used by typical receivers or amplifiers.- It also boosts the bass and reduces the treble according to an industry standard (the RIAA equalization curve) to restore the signal from the record to its original frequency response.The Pyle PP999 is just an inexpensive phono preamp, nothing special. Phono preamps can range from $20 on up to whatever you're willing to pay for ultra-high quality. Some manufacturers make "USB" phono preamps that have A/D (analog-to-digital) converters built in and connect to a computer's USB port. Most of these provide "CD quality" conversion (16-bits at 44kHz or 48kHz). These may be adequate for digitizing your vinyl, but many computer sound systems can provide up to 24-bit, 192 kHz conversion depending on the software you use (much higher quality), by connecting the preamp output to the computer's line input. Don't just convert directly to MP3 files...you'll lose too much detail compared to the original vinyl sound. It takes almost no time to make an MP3 copy of a high bit-rate WAV or FLAC (lossless) file, but it'll take you an hour to make ANY digital copy of an LP, so do it the best you can the first time!
Question:	So this is a stupid question, I plug my RCA wires coming from my turntable into the Amp. But where do I plug the speaker wires into on the Amp
Answer:	TurnTable==>PreAmp==>Receiver/Amplifier==>SpeakersThe 'Pyle PP999' is the "Preamp". The Turntable is plugged into the PP999 INPUT and the PP999 OUTPUT plugs directly into any (non Phono) INPUT on the receiver. Your Receiver allows you to switch between different music-sources, contains the primary-amplifier and distributes the final sound out to the speakers(and subwoofer). The Receiver should have multiple inputs for receiving signals from eg. CD, Tape, VCR, etc. In my experience those labels are for convenience and interchangeable with the exception of a "Phono" input. NOTE: If the receiver has a "Phono" input then there's a built-in preamp. If your using an external preamp (Pyle PP999) do NOT plug it into the Receiver's 'Phono' input, it could cause damage. I plug the preamp for the turntable into the Receiver's 'VCR' or 'TV' inputs.
Question:	I have the Pyle turntable and Pyle stereo but they don't work together--VERY low sound--so is this the missing piece
Answer:	Turntables (with typical magnetic cartridges) have very low signal output (a few thousandths of a volt). Records have the bass reduced to provide enough room on the surface for the recorded grooves, and the treble boosted to reduce the surface noise level when played back. Most modern receivers DO NOT have the right inputs to deal with this signal (no "phono" input). A phono preamplifier performs two jobs: - It boosts the small signal from the turntable by about 50 to 100 times (producing a "line level" signal) so it can be used by typical receivers or amplifiers.- It also boosts the bass and reduces the treble according to an industry standard (the RIAA equalization curve) to restore the signal from the record to its original frequency response.The Pyle PP999 is just an inexpensive phono preamp, nothing special. Phono preamps can range from $20 on up to whatever you're willing to pay for ultra-high quality. Some manufacturers make "USB" phono preamps that have A/D (analog-to-digital) converters built in and connect to a computer's USB port. Most of these provide "CD quality" conversion (16-bits at 44kHz or 48kHz). These may be adequate for digitizing your vinyl, but many computer sound systems can provide up to 24-bit, 192 kHz conversion depending on the software you use (much higher quality), by connecting the preamp output to the computer's line input. Don't just convert directly to MP3 files...you'll lose too much detail compared to the original vinyl sound. It takes almost no time to make an MP3 copy of a WAV or FLAC (lossless) file, but it'll take you an hour to make ANY digital copy of an LP, so do it the best you can the first time!

Product description

Since many modern amplifiers no longer have a dedicated phono input, the phono box mm from Pro-Ject is the perfect addition to your turntable setup. Compatible with nearly any moving magnet cartridge, the phono box mm gives you a superb audiophile music experience at an entry-level price. The utilization of advanced circuitry keeps noise and distortion extremely low, and the metallic case and outboard DC power supply keeps the unit free from electromagnetic interference. Since it's only slightly larger than a pack of playing cards, the phono box mm can be placed nearly anywhere. The RCA input and output sockets are gold-plated to preserve sound quality and can be connected directly to any line-level input (aux, CD, Etc.) on your amplifier.

• Compatible with moving Magnet phono cartridges
• Dual-mono circuitry for optimized Channel separation
• Low-noise integrated circuits
• Gold-plated RCA inputs and outputs
• Metal case protects unit from vibrations and electromagnetic interference

User questions & answers

Question:	Can i play vinyl from my B&O 3400 turntable & cartridge thru a vizio soundbar model# s4251w-b4? Do I need to use my pyramid sea2500x preamp too
Answer:	Most likely. I go from my record player to this to a mixer. So I'm guessing your receiver probably has an aux in which is what you plug into from the art.
Question:	Do i need to buy this for yamaha A-s801 integrated amp or that amp has a phono
Answer:	Sansui? Ceramic's, as I recall, can run close to 1 V output. This preamp is designed for moving magnet cartridges (not moving coil) that produce ~ 5 mV output. Even at -10 dB on the gain/attenuation knob, it would still be too hot. 1 V with -10 dB attenuation is ~ 300 mV which is far more than supported. Per manufacturer, max input is 40 mV. So, no, this won't work with your ceramic cartridge.
Question:	Just to be clear, my AVR (Onkyo tx-nr535) doesn't have a phono input. Do I connect the turntable to this device and plug this device into my AUX port
Answer:	Without a ground wire, there may be a discernible hum. I have a Yamaha PF 1000 and the ground wire is is a must.
Question:	How can i tell if my pioneer pl-460 is mm or mc
Answer:	I've had both, and kept the DJpre. There's a thread on an audio science forum where a user conducted a thorough level-matched test of both the Pluto and the DJpre with an oscilloscope and other precision instruments. They both performed very well, but the DJpre came out decidedly on top in several key categories. Whether that translates to a noticeable difference in sound quality depends on the listener, but the DJpre is empirically better than the already good Pluto. He also found that the DJpre performed best when the low cut rumble filter was on--not only did it kill the sub-20hz sounds, it actually boosted the audible frequency response across the board (particularly the highs where the Pluto tends to roll off). This is easily the best phono pre at $50 and under, and performs better than units costing twice as much. You'd have to spend $250+ to get a better pre, and even then it'll only be a miniscule improvement.

Product features

Features

• Amplification and RIAA equalisation for MM and High-Output MC cartridges
• Metal case shields the electronics from vibrational and electromagnetic interference
• Special low-noise ICs used
• Optimal channel separation through dual-mono circuitry
• Gold plated RCA connection sockets
• DC power supply (< 1 watt standby power)
• Small size allows installation close to record player

Audiostance reviews the Phono Box MM

US, 05.2019 "If your budget is maxed at 100 then the Pro-Ject Phono Box MM is the best phono preamp under 100. Pro-Ject Audio is a high-end turntable and phono accessories manufacturer out of Austria in Europe."

• ❤Tube MM Phono Preamplifier: Converts phono signals to Line Level Signals with low-noise integrated circuits and high-quality components to remove low-frequency noise ensure clear sound quality. Designed with grounding post to protect your turntable.
• ❤Three switchable gain modes: 39, 42, 45 dB. Adjustable gain levels to give you customizable control and outstanding compatibility. Entry-Level high-end analog sound and top-notch circuitry for an unbeatable low cost.
• ❤Tube Preamplifier: It's also a tube preamp with 3.5mm AUX Input. Designed and assembled by Fosi Audio from high-quality components. Great warm, smooth-sounding.
• ❤Applicable vacuum tube model: 6K4/6J1/6J4/GE5654/6AK5/66*In vacuum tubes, etc. You can replace the vacuum tubes to DIY your stereo system. Different tube with different sound.
• ❤What You Get: Box X2 phono preamp x1, Vacuum tubes x2, RCA cable x1, power adaptor x1, user manual x1, 18-Month global warranty, and 24-Hour quick customer service.

Product features

Tube MM Phono Preamplifier/Tube Preamp

• Power Adapter Output: 12V/1.5A
• Product Adapter Input Voltage Range: AC 110V - 240V
• Box X2 Phono Preamp DC Input Voltage: 12V
• Output Voltage Level: 600 Mv @3mV 1kHz
• SNR ≥ 98dB
• THD ≤ 0.1%
• Frequency Response: Standard RIAA
• Product Weight: 0.66 lb/300g
• Product Dimensions: 4.66 inch/3.85 inch/1.29 inch

Tube Preamplifier

Audiophile-grade amplification modules offers outstanding performance with its Low-Noise Audio Operational Preamplifiers. It's also a tube preamp with 3.5mm AUX Input. Designed and assembled by Fosi Audio from high-quality components.

Gain Adjustment

Three switchable gain modes: 39, 42, 45 dB. Adjustable gain levels to give you customizable control and outstanding compatibility. Entry-Level high-end analog sound and top-notch circuitry for an unbeatable low cost.

MM Turntable Preamp

Suitable for moving-magnet (MM) cartridges. Precise RIAA equalization. Consistent sonic performance, super low-noise. This mini preamp has stereo RCA inputs and stereo RCA outputs Connect the turntable to the RCA inputs and ground.

12V/1.5A Power Adapter

Energy-efficient and stable power supply which got authoritative certification by many security tests.

Replaceable Vacuum Tubes

Applicable vacuum tube model: 6K4/6J1/6J4/GE5654/6AK5/66*In vacuum tubes, etc.

FREE RCA Cable

Fosi Audio Box X2 preamp comes with a FREE RCA cable. Unbeatable low cost for an home audio phonograph preamp.

• 🍎 NOTE: This is a preamplifier, not a power amplifier or phono preamp, can't be used for turntables or passive speakers.
• RCA input to the computer, CD, phone, iPod and other player and RCA output to the digital amplifiers, active multimedia audio devices for lossless audio(The RCA cables not included).
• Small compact design, with optimal integrated circuit to get powerful, dynamic and sweet sound. Tubes can be replaced by 6K4,6AK5,EF95, 5654,403B tubes.
• This pre-amp improves everything detail, transparency, immediacy, richness, tone associated with your music.
• Built-in Switch impact protection circuit and overheat protection circuit, long life span of this unit. All aluminum alloy shell and come with a 18-month manufacturer's warranty.

User questions & answers

Question:	Can this preamp connect to my active speakers? or just connnect to power amplifier
Answer:	Hi, This is a stereo preamplifier, you can connect it to the active speakers or power amplifier than to passive speakers.
Question:	I have this hooked up to bookshelf speakers, sounds great, would i hear a noticable difference hooking it to a subwoofer
Answer:	I currently use the Pre-Amp with a powered subwoofer amp, it works just fine. The P1 has frequency response down to 20hz, so adding a subwoofer may be worth your while.
Question:	Can i hook this up to a 2 channel receiver? i have a pioneer sx-10ae
Answer:	Yes you can if your receiver has output/input jacks for the Fosi to be in a "loop". If you do not have input/output jacks then you would be relegated to installing the Fosi to cd player or turntable or whatever component you are trying to acquire a bit of tube sound. I use mine to "soften "a bright metal tweeter in my speakers. Since I have separate components it was easy to install in my case. Also check to see if your receiver has "preamp" in/out jacks. This would also allow you to install the Fosi to have a effect on your receiver as well as any other components you have connected to it. A bit of research on your part will be required.
Question:	Is there a recommended replacement tube
Answer:	I replaced the stock ones with the Riverstone Audio 7-Pin GE JAN 5654W (https://www.amazon.com/gp/product/B01BFJDTW0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1). They are very nice tubes but do need about 20-25 hours of solid burn-in before they start to "warm up the sound" in my opinion.

Product features

6K4 Tube Preamplifier

• Power Adapter Output: 12V/1.5A
• Product Adapter Input Voltage Range: AC 110V - 240V
• SNR ≥ 98dB
• THD ≤ 0.1%
• Treble adjustment range: ±6dB
• Bass adjustment range: ±10dB
• Input Mode: RCA
• Frequency Response: 20HZ -20KHZ((±3dB)

Tube preamp with BASS and TREBLE control

Satisfies your need for more sound quality! Great Warm Smooth Sounding!

Simple, thoughtful design

Fosi Audio P1 is easy to connect to your power amplifier or active(powered) speakers with no software to install or settings to change.

Adopt 2pcs 6K4 vacuum tubes

Powerful, dynamic, and sweet TUBE SOUND! Applicable vacuum tube model:6J1,6AK5,EF95, 5654,403B, etc.

Product description

Cut the cord keep the vinyl The at-lp60xbt gives you all the great Features of the redesigned AT-LP60X fully automatic belt-drive stereo Turntable with the added convenience of Bluetooth wireless connectivity So you can set up your turntable in one room and listen to it in another without having to run a bunch of cables The turntable pairs with speakers headphones or other wireless devices With its CSR BT chip set the turntable is even able to connect to devices that support the aptX codec which offers much-improved sound quality over the standard SBC codec Of course the at-lp60xbt can also be operated just like a regular turntable with a traditional wired connection Either way – wired or wireless – you get outstanding audio with the ease of automatic operation controlled by front-panel start stop and tonearm lift buttons Audio-Technica has been a leader in phono cartridge design for more than 50 years and that expertise shows In the at-lp60xbt’s dual Magnet cartridge with replaceable stylus The cartridge is integrated into the head shell for assured performance and ease of setup The at-lp60xbt plays both 33-1/3 and 45 RPM records and comes with a 45 RPM Adapter a detachable dual RCA output cable (for wired connection) and a removable hinged dust cover The turntable is available in black (at-lp60xbt-bk) white/black (at-lp60xbt-wh) and red/black (at-lp60xbt-rd) * the Bluetooth word mark and logos are owned by Bluetooth SIG And any use of such marks by Audio-Technica Corporation is under license Other trademarks and trade names are those of their respective owners

• power source type: DC
• output wattage: 3.00
• included components: Turntable, Detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, Removable hinged dust cover

User questions & answers

Question:	Does this turntable have built in speakers, or must you have external speakers? could i play it through an ultimate ears boom 3 bluetooth speaker
Answer:	For better sound, external speakers are recommended.I bought 2 speakers last month, the sound quality I think is really good , clear and smooth .you can get my speakershere:https://www.amazon.com/dp/B07XTDNGZW?ref=myi_title_dp
Question:	What’s the difference lp60xbt-bk and the lp60bk-bt
Answer:	The "X" line is the newest line of Audio-Technica turntables. The LP60X is an update of the popular AT-LP60, the ATLP60X features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.
Question:	Weight of needle on record? One oz or does it kill records
Answer:	I don't know the weight of the needle,but this record player killed my 3 records,rubbish
Question:	Does the arm/needle damage the vinyls in such a way as the cheap $50 briefcase style vinyls players? Can I upgrade if need be
Answer:	All turntables degrade the performance of vinyl media. The better the counterbalance of the weight of the tonearm, the slower the degradation. The direct contact between the stylus and the grooves in the disk is abrasive. A heavy tonearm is like 100 grit sandpaper and a light tonearm is like 600 grit. I transfer all my LPs to tape and CD. Most of my LPs have only been played two or three times in decades. Limited use and proper storage keeps my collection pristine.

Product features

Hi-Fi audio

High-fidelity audio with Bluetooth wireless technology. Compatible with aptX codec.

Connect wirelessly

Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers

Easy operation

Fully automatic operation with two speeds: 33-1/3 and 45 RPM

Minimize vibration

Anti-resonance, die-cast aluminum platter

Redesigned tone arm

Redesigned tone arm base and headshell for improved tracking and reduced resonance

High-quality Audio-Technica cartridge

Integral Dual Moving Magnet phono cartridge with replaceable diamond stylus (ATN3600L)

Increased clarity

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Connectivity options

Built-in switchable phono pre-amplifier for phono- or line-level output

Supplied accessories

Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

Product description

Get your classic albums off the shelf and into your MP3 player. The Audio-Technical AT-LP60 USB makes it easier than ever to transfer your albums to the digital realm with this new recording system. The AT-LP60 USB stereo turntable comes equipped with a USB output that allows direct connection to your computer. The system also offers: state-of-the-art recording software - Audacity (for both MAC and PC), an integral dual-magnet Audio-Technical phono cartridge, a USB cable and adapter cables. The turntable also features a built-in switchable phono/line preamp that allows connection to a stereo system equipped with either a phono or line-level input.

• Convert your vinyl records to digital audio files
• Mac and PC compatible Audacity software digitizes your records
• Fully automatic belt drive turntable operation with two speeds: 33 1/3, 45 RPM
• Anti resonance, die cast aluminum platter
• If you are purchasing the product for a sales area outside the U.S., you should consider purchasing the turntable from your sales region. This unit is set to operate on 120 Volt AC
• Integral Dual Magnet phono cartridge with replaceable diamond stylus
• Built in switchable phono pre amplifier with RCA output cables to connect to audio systems and powered speakers

User questions & answers

Question:	Can I load my albums into itunes
Answer:	You bet --- once you digitize your albums and have them in MP3 format, you can import the into iTunes as you would any other music.
Question:	Can I play a record to my computer and burn a cd, also does the software come with this unit. Thankyou
Answer:	Once you've transferred the vinal to digital you can burn a cd or use it the way any digital items are used. The software is a separate FREE download. The instructions are included.
Question:	Will I be able to transfer music to my iTunes library
Answer:	Richard, generally, as I understand it, yes. You will be able to record your records to your PC hard drive. From there, you can convert your music files to whatever formats you prefer. For iTunes, I believe you can import them into iTunes and iTunes will automatically convert them to iTunes format as you import them. If there is a more direct method to record them to iTunes, I'm not aware of it. Hope this helps! Skip
Question:	My husband just received this turntable as a Christmas gift. Any recommendations for a receiver that is compatible? Our old receiver is broken
Answer:	Basically any receiver/amp will work with this unit as long as the inputs are RCA jacks and that's pretty much all of them. Here's how it breaks down. All turntables require a pre-amp before the signal goes to the main amplifier. Most modern receivers do not have a dedicated slot for turntables any longer. So most turntables include the pre-amp built in. The switch for the pre-amp is on the back of the Audio Technica.* So if your receiver has a setting for "Phonograph", "Phono" or "Turntable" you're good to go. Just switch the pre-amp Off on the back of the turntable.* If your receiver doesn't have a setting for "Phonograph", or one of the a fore mentioned, then turn the switch On. That's it. Simple. Just be aware that should you buy a receiver without a "Phonograph" input you will loose the slot for whatever peripheral should go there. In my case I use an Onkyo CR-315 Shelf Unit. I plug my Audio Tecnica into the "Dock" slot. This is to be used with a special docking device that allows you to plug in an iPod. I know longer have this device, so no harm no fowl. If however I did have this device and needed to use it, I would constantly be switching between these two devices on my receiver. So just make sure you have enough inputs to avoid this potential hassle.Really, the only thing you need to look for on a receiver is to make sure it excepts inputs through RCA jacks and again, that's pretty much the standard. As to brand, that's up to you as far as your needs and budget.
Question:	Any recommendations for speakers i can hook directly into the rca jack? i want something with great sound that is similar to a portable speaker
Answer:	Hi, Mine speakers' sound is great. you can buy with the link:https://www.amazon.com/s?k=Udreamer+Bookshelf+Speaker&me=A20PPATB6ITV8T&ref=nb_sb_noss&field-asin=B07XMND1QS
Question:	Is there any way to tell if it is recording? i have tried fat32 usbs (as cust svc indicated) and an sd card-nothing. i don't know if it is recording
Answer:	I wondered the same thing. I haven't used it lately, but I remember a blinking icon when it was recording. I'll set mine up and look again.
Question:	does this convert cassette to mp3 files
Answer:	Hi, it could convert cassette tape to mp3 file.
Question:	can you record from the tape
Answer:	Yes, you can play your favorite cassettes and record them to a USB/FlashDrive. Note, if you want to have separate tracks, you will need to press record before and after each song; otherwise you will just have 1 long track that includes all songs on one side of the tape. Hopefully that answers your question! You can do the same to record to flashdrive from the radio or vinyl record. I have not tried recording from bluetooth or AUX to a flashdrive, but I imagine the process would be about the same.

Product features

All-in-one record player

All-in-one record player delivers remarkable sound which would be full aroud your hourse. With bluetooth fuction, it supports to connect to external device wirelessly. Easy to integrates music into every aspect of your life - from tabletop to bedsides, from sunny mornings to rainy nights. (Please note: Long press around 5 seconds to power on)

Start Up

1. Connect the power cord to AC outlet, Press the "Power/Volume " key a little longer around 3s then POWER will ON .

2. Press the SOURCE Key to PHONO, TAPE, AUX IN, USB&SD ,TUNER or BLUETOOTH function. Now your system is ready to play the music.

Bluetooth Function

Built-in Bluetooth Receiver lets you stream your music wirelessly to the DIGITNOW! turntable stereo speakers. And built-in analog AM/FM radio and cassette tape playback and stereo speakers.

USB Disk / SD Card Recording

Converting vinyl to MP3 with USB Flash Drive/SD Card directly. It also can play music from U disk or sd card.NO computer or software require.

3.5mm Music Output Jack

Support 3.5mm music output jack, you can connect 3.5mm headphone or 3.5mm home speakers or RCA home speakers. (connect RCA need 3.5mm to RCA convert cable, not included）

Convert Vinyl Records

USB output and included software provides all that’s necessary to convert vinyl into portable music files.

Easy Operation

Fully automatic turntable operation gently places the stylus on records for you and automatically returns the tonearm when record ends; supports both 33-1/3 and 45 RPM records.

Minimizes Vibration

Anti-resonance, die-cast aluminum platter.

Belt-Drive Design

The AT-LP60’s belt-drive design isolates the platter from motor vibrations, resulting in increased clarity and high-fidelity audio.

High-Quality Audio-Technica Cartridge

Integral Dual Magnet Audio-Technica phono cartridge with replaceable diamond stylus.

Wide Variety of Connectivity Options

Built-in switchable phono pre-amplifier with RCA output cables and USB cable to connect to a computer, audio system and powered speakers (not included).

Supplied Accessories

Includes: dual RCA (female) to 3.5 mm (1/8") mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (1/8") mini-plug (female) stereo adapter cable; 45 RPM adapter; USB cable; recording software.

Dust Protection

Removable hinged dust cover.

Product description

Whether you’re just getting into records, rediscovering a record collection long since buried away or simply adding a turntable to complete your system, the AT-LP60X fully automatic belt-drive turntable is an excellent choice. This affordable, easy-to-use turntable plays both 33-1/3 and 45 RPM records and, with its built-in switchable phonon preamp, can be connected directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phonon input or not. An update of the popular AT-LP60, the ATLP60X features a redesigned tone arm base and head shell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conVersion outside of the chassis where its impact on the signal chain is limited. Audio-Technical has been a leader in phonon cartridge design for more than 50 years, and that expertise shows in the AT-LP60X’s Dual Magnet cartridge with replaceable stylus. The cartridge is integrated into the head shell for assured performance and ease of setup. The turntable comes with a detachable RCA output cable (3. 5 mm male to dual RCA male), 45 RPM adapter, and a removable hinged dust cover. It is available in black (AT-LP60X-BK), brown/black (AT-LP60X-BW), gunmetal/black (AT-LP60X-GM), and red/black (AT-LP60X-RD).

• Experience the high fidelity audio of vinyl
• Fully automatic belt drive turntable operation with 2 speeds: 33 1/3, 45 RPM
• Anti resonance, die cast aluminum platter
• Redesigned tone arm base and head shell for improved tracking and reduced resonance
• Ac adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

User questions & answers

Question:	Does this turntable need speakers to play the record
Answer:	Yes. Needs an amp and speakers.
Question:	What are the differences between this at-lp60x and the regular at-lp60? this one https://www.amazon.com/audio-technica-at-lp60-automatic-belt-drive-tu
Answer:	Lp60x is the newer model.. there are some aesthetic changes, DC conversation happens in the plug now, the o/p is a 3.5mm aux jack with a aux to rca cable(instead od the other way around in 60) that's what I found when I was researching on it. There might be some internal changes too
Question:	Do you needle for this product
Answer:	The need comes with the product. I bought this as a gift for my mother.
Question:	What does ‘fully automatic’ mean exactly
Answer:	A fully automatic turntable will queue and play the record itself with the push of one button as well as return the tonearm on it's own once the record is finished playing.

Product features

Hi-Fi audio

Experience the high-fidelity audio of vinyl

Easy operation

Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM

Minimize vibration

Anti-resonance, die-cast aluminum platter

Redesigned tone arm

Redesigned tone arm base and headshell for improved tracking and reduced resonance

High-quality Audio-Technica cartridge

Integral Dual Magnet phono cartridge with replaceable diamond stylus (ATN3600L)

Increased clarity

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Connectivity options

Built-in switchable phono pre-amplifier for phono- or line-level output

Supplied accessories

Detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

Product description

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM. The turntable includes a straight, matte-finish, carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

• Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
• Motor features a speed-sensor system to maintain accurate platter rotation speed
• Adjustable dynamic anti-skate control
• Professional anti-resonance, die-cast aluminum platter with rubber mat
• AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
• Included components: Turntable, Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge (black), 45-RPM adapter, RCA audio cable (approx. 1.0 m (3.3')), AC adapter (approx. 1.5 m (4.9')), Dust cover hinges
• Connectivity technology: Wired

User questions & answers

Question:	where is this made
Answer:	Yes

Product features

Fully manual, belt-drive turntable

High-fidelity audio reproduction from vinyl at two speeds: 33-1/3 and 45 RPM. Motor features a speed-sensor system for accurate platter rotation speed.

Piano-black finish

Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish.

Professional platter

Professional anti-resonance, die-cast aluminum platter with rubber mat. Also featuring high-isolation, height-adjustable feet.

Switchable output

Features built-in switchable phono preamplifier for phono or line-level output.

Replaceable stylus

AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus.

Matte-finish, carbon-fiber tonearm

Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest. Adjustable dynamic anti-skate control.

Supplied accessories

Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover.

Product description

The AT-LPW40WN is a fully manual belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount head shell with an AT-VM95E Dual Moving Magnet phono cartridge Audio-Technical has been a leader in phono cartridge design for more than 50 years and that expertise shows in the versatile high-performance AT-VM95E cartridge which comes with a 0 3 x 0 7 mil elliptical stylus but is also compatible with any VM95 Series replacement stylus offering a wide choice of options for every budget and application The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input

• Included Components: Turntable, Dual Rca (Male) To Dual Rca (Male) Stereo Cable, 45 Rpm Adapter, Rubber Mat, And Removable Hinged Dust Cover

User questions & answers

Question:	will arm return at end of album
Answer:	no
Question:	Do I need speakers for this item
Answer:	You will need speakers and an amplifier or receiver.
Question:	is this fully analog or does it convert to digital
Answer:	Fully analog.
Question:	What are the differences between this and the LP120X
Answer:	The main differences are the MDF 40WN vs plastic plinth 120x, belt drive 40WN vs direct drive 120x, and the carbon fiber upgraded tone arm of the 40WN vs a low end tone arm 120x. Also theres no mention of there being a speed monitoring system for the motor of the 120x. The 120x has a plinth mounted led and a USB output that the 40WN doesn't if that's important. To sum it all up if your aim is to listen to records casually, you dont really care about the hifi, and you have no interest in upgrading the stylus cartridge then the 120x isnt a bad choice. Yes the 120x has the VM cartridges just the same as the 40WN but the tone arm of the 120x would need to be upgraded to really benefit from the change of the cartridge. Also you run into the possible motor vibration issues of direct drive that can affect the sound vs a usually preferred belt drive which isolates the turntable from the motor vibration. My opinion is to spend the extra $ and get the better turntable, the 40WN is much better looking to my taste as well.

Product features

Audio-Technica AT-LPW40WN

The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

Features

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Product description

This update of the AT-LP120-USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files. But in addition to the USB output, the turntable also comes with a detachable dual RCA output cable and is equipped with a built-in selectable phono preamp so you can connect directly to your home stereo, whether it has a dedicated phono input or not. The turntable features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal ½"-mount headshell with an AT-VM95E Dual Magnet™ phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. Additional features include a die-cast aluminum platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8% or +/-16% adjustment ranges; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover. Available in black (AT-LP120XUSB-BK) and silver (AT-LP120XUSB-SV). Power Supply Requirements- 100 to 240 V, 50/60 Hz, 1.5A Maximum and Power Consumption- 2.75 Watts.

• Experience the high-fidelity audio of vinyl
• Direct-drive, DC servo motor with selectable 33/45/78 RPM speeds
• Fully manual operation featuring adjustable dynamic anti-skate control, variable pitch control with quartz speed lock, and balanced S-shaped tonearm with hydraulically damped lift control and lockable rest
• Convert your vinyl records to digital audio files by downloading and using the free Mac- and PC-compatible Audacity recording software (or software of your choice)
• Includes: USB cable, detachable RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

User questions & answers

Question:	Can I plug this turntable into powered speakers and have sound or do I need a receiver
Answer:	You can use it in both ways.
Question:	I have always owned belt drive turntables. I have read that direct drive can be noisy. How is this one as far as rumble
Answer:	My previous turntable was a very nice AR belt drive table, and I had the same concern about direct drive rumble. Not any more. The AT-LP120XUSB is dead silent. It sounds incredible.
Question:	So, since this turntable has a built in preamp, does this mean I can use passive speakers? Or do I need powered speakers
Answer:	No. You'll need powered speakers or you'll need to plug it into an amp to use passive speakers. "Preamp" = pre (before) amplifier. Preamps and phono amps take the very low signal from the stylus and amplify it to a level that an amplifier can use. AND (the reason record players need phono-specific preamps instead of a standard preamp) the preamp/phonoamp also decodes the RIAA format that all albums since the 1950s use, which is proprietary and needs a specific type of decoding to play the music.
Question:	Ok,..in plain english,...can i plug this tt into external speakers? that's all i want it for. if yes,...what type of speakers
Answer:	Yes you can... The turntable has a built-in preamp. You want to buy powered speakers. They sell tons of them now. The best I have heard were KRK powered speakers. To get a good idea of what’s available, check out the needledoctor or crutchfield websites.

Product features

Direct-drive, DC servo motor

Fully manual operation. Selectable 33/45/78 RPM speeds

Convert your vinyl records to digital

Connect to a computer via the USB output and convert by using the free Mac- and PC-compatible Audacity software (or software of your choice)

Minimize vibration

Professional-grade anti-resonance, die-cast aluminum platter with felt mat

Audio-Technica headshell and cartridge

AT-HS6 universal ½"-mount headshell and AT-VM95E Dual Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus

Tone arm

Balanced S-shaped tone arm with hydraulically damped lift control and lockable rest. Also features adjustable dynamic anti-skate control.

Playback controls

Features a stroboscopic platter with speed indicator, and variable pitch control with quartz speed lock

Target light

Popup stylus target light for easier cueing in low light

Connectivity options

Built-in switchable phono pre-amplifier for phono or line-level output

Supplied accessories

USB cable, RCA output cable (dual RCA male to dual RCA male), AC adapter, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover

Product description

Audio-Technica AT-LP3BK Fully Automatic Belt-Drive Stereo Turntable, Black

• Take your analog listening experience to the next level with advanced features not typically found on automatic turntables
• Balanced straight tone arm comes with a 1/2" mount universal headshell and AT91R Dual Moving Magnet phono cartridge, giving you excellent high-fidelity performance
• Hydraulically damped lift control allows the stylus to be precisely and safely lowered and raised at any point on a record
• Offers fully automatic operation; simply press the Start button to begin play and the Stop button to lift and return the tone arm and shut off the turntable
• Constructed of anti-vibration damping materials that limits low-frequency feedback
• Resonance is further reduced by the turntable’s die-cast aluminum platter and accompanying 4 mm rubber damping mat
• Plays both 33-1/3 and 45 RPM records, and has a built-in switchable phono preamp with dual RCA output to connect to a home stereo, powered speakers and other components with or without dedicated turntable input

User questions & answers

Question:	Does the phono signal bypass the preamp circuitry completely when disengaged or is there some coloring of the sound even when bypassed? Thank you
Answer:	While I can't give you the definitive technical answer you are looking for, I can tell you I have it set up next to an old school Sanyo semi auto playing through a top of the line Onkyo pre-amp, DH500 mosfet amp, and new top of the line JBL tower speakers I just got to replace 40 year old Ohm Walsh 4's. Sound is as clear as the older turntable; I'd attribute any difference in the color of the sound to the cartridge; which can be upgraded. I checked out many turntables before I bought; and this seemed to be the best available unless you want to step up to a manual model. I'm happy with the purchase so far.
Question:	What are the actual dimmesions on the audio techna lp3bk
Answer:	17long,14w,4@3quarters high. bob
Question:	Anybody experiencing problems with the speed varying
Answer:	Yes, after the turntable was used for a month or so, I noticed the speed was a bit high... most noticeable on familiar records. I looked into how the speed can be adjusted on the bottom of the turntable... a fine adjustment that must be done with care, jewelers screwdriver and a speed checker. I used a free App called RPM on my iPhoneSE After carefully adjusting 2 or 3 times, the turntable has not needed further adjustment for about a year. I think it just needed a break in period for the belt drive and bearings. I hope this info is helpful.
Question:	If you manually cue, does it auto return
Answer:	If you manually place the arm on the record when it reaches the end of the record the auto return will activate and the arm return to its resting place and shut off.

Product features

Fully automatic operation

Fully automatic belt-drive turntable with simple start/stop operation that plays both 33-1/3 and 45 RPM records

Hydraulically damped lift control

Balanced straight tonearm with hydraulically damped lift control allows the stylus to be precisely and safely lowered at any point on a record

Switchable pre-amp modes

Built-in switchable phono/line pre-amplifier with dual RCA output

AT91R dual moving magnet cartridge

Specifically designed for the LP3, the AT91R cartridge incorporates an aluminum cantilever for higher-rigidity & improved pick-up of subtle details

Universal headshell

Removable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance sound. Suitable for 1/2" mount cartridges & 4-pin turntable arms

4 mm platter mat

Anti-resonance, die-cast aluminum platter with 4 mm thick rubber mat

Damped base construction

For reduced low-frequency feedback coloration

Includes

45 RPM adapter and removable hinged dust cover