12 best subwoofer subs

Product description

Rockville RW10CA 10" 800 Watts Peak/200 Watts RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote. Amplifier will not power up: Check to make sure you have a good ground connection, check that the Remote Input (Turn-On) has at least 5VDC, check that there is battery power on the (+) terminal, check that there is at least 12v, check all fuse, replace if necessary, make sure that the Protection LED not illuminated. If it is lit, shut off the amplifier briefly, and then repower it.

• Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
• 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
• Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
• Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
• Thermal Protection Circuit, Short Protection Circuit.
• Overload Protection Circuit. Phase Switch: 0° or 180°.
• Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.

User questions & answers

Question:	Does this come with everything needed for installation
Answer:	Yes
Question:	does anyone know if it will fit under the seat in an 81 gmc k
Answer:	It should. The box is not too big. It fits in my 2002 Mercedes c240.
Question:	What are the true measurements of this thing? Can someone get out there with a tape measure because owners are reporting different numbers? Thanks
Answer:	No
Question:	Can i hook this up on a harley Davidson
Answer:	It is not ported...it's a sealed unit.

Product features

Rockville RW10CA 10 inch 800 Watt Slim Low Profile Active Powered Car Subwoofer

The RW10CA has 800 watts of peak power and 200 watts RMS. This model is CEA-2006 compliant which means the ratings are approved by a 3rd party so you can be 100% sure that this item will produce the power it says it will. This is one of the only slim underseat subs on the market that is CEA compliant.

Do not get fooled by other brands who write bogus power ratings that do not comply with any industry standard. Even if another unit says 2000 watts on it, ours is better and louder. If you are not happy with any Rockville product we will take it back within 30 days of when you receive it and refund you. We know our our products will satisfy you.

The RW10CA is an all in one solution to give you great sounding bass in your vehicle without taking up a ton of space. This sub enclosure is only 2.7 inch thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is easy and clean.

Product description

The Skar Audio SDR-12 D4 12" Dual 4-ohm subwoofer was engineered to dish out reliable, hard hitting, and low spectrum sound. Featuring a high flux ferrite motor, This woofer will provide extreme power handling for extended periods of time. The SDR series will quickly become a customer favorite, as it's perfect for people just entering the world of car audio all the way up to seasoned pros. The SDR-12 Dual 4-ohm 12-inch car subwoofer features a 2.5” high temperature 4-layer high temperature copper voice coil that is attached to our Skar Audio signature red spider. The surround on the SDR series is a high roll foam surround which allows the woofer to produce riveting low end bass response. The SDR series has a max power rating of 1, 200 watts and a RMS power rating of 600 watts. Sensitivity (SPL): 84.7 dB, mix: 13.5mm one-way, Fs: 32 Hz, frequency response: 22 Hz- 300 Hz, mounting depth: 7.62".

• 12-Inch Dual 4 ohm Car Subwoofer
• Peak Power: 1, 200 Watts | RMS Power: 600 watts
• 2.5" 4-Layer high temperature Copper voice Coil
• High Roll Foam Surround - High flux ferrite motor
• Frequency response: 22 Hz - 300 Hz | Sensitivity: 84.7 dB

User questions & answers

Question:	Does this sub come in pair or would I have to order
Answer:	I have mine each in their own sealed box one behind each seat in my standard cab tacoma and they sound really good actually I was impressed because everyone talks down on Skar audio. They are pretty loud but since there shallow mount they don't shake the truck too much. They're definitely good subs though 👍
Question:	Why the two sets of connections
Answer:	Play 12 hrs of music with the speakers at half power. Also play some bass test frequency sweeps aswell, that should loosen them up.
Question:	How big is the magnet? And what amp would go good with a pair of these
Answer:	I have the single arm and I think it can go pretty low. Never tried to get it flush, but it can get close.
Question:	If I bought 2 to put I’m my car what amp would you recommend? Putting out 2400w
Answer:	How deep of a lip does the desk need? I'm using an Arozzi gaming desk, which is just shy of 1". The clamp is U shaped and the tightening bolt is about 3" in length. It will tighten down on a desk as thin as 1/4".

Product features

Technical Specifications

• Dual 4 Ohm Voice Coil Configuration
• Peak Power: 1200 Watts
• RMS Power: 600 Watts
• Competition Grade Pressed Paper Cone
• 2.5" High Temperature Copper Voice Coil
• Frequency Response: 22 Hz - 300 Hz
• Sensitivity: 84.7 dB
• Xmax: 13.5 mm
• Mounting Depth: 6.47"

Skar Audio DNR-15 D2

The Skar Audio SDR series was engineered to dish out reliable, hard hitting, and low spectrum sound. Featuring a high flux ferrite motor, this woofer will provide extreme power handling for extended periods of time. The SDR series will quickly become a customer favorite, as it's perfect for people just entering the world of car audio all the way up to seasoned pros.



The SDR series features a 2.5” high temperature 4-layer high temperature copper voice coil that is attached to our Skar Audio signature red spider. The surround on the SDR series is a high roll foam surround which allows the woofer to produce riveting low end bass response. The SDR series has a max power rating of 1,200 watts and a RMS power rating of 600 watts.

Product description

Package: Rockville W15K9D4 15 10000 Watt Dual 4-Ohm Car Subwoofer - CEA Compliant

• Rockville W15K9D4 K9 Series 15" Dual 4-Ohm Car Subwoofer. Peak Power Handling5000 Watts. Program Power Handling2500 Watts. CEA Rated RMS Power Handling1250 Watts. 3" 4-Layer Black Aluminum Voice Coils Wound with OFC Wire Made in USA. This voice coil is stable up to 240 degrees celcius! The voice coil windings are made in the USA!. Double Stacked 190 Oz High Quality Magnet. Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient And Lighter Weight
• Two Chrome-Plated Binding Post Terminals. Black Non-Pressed Paper Cone With Beautiful Finish. Our cones are ultra-stiff. They are thicker and stronger than other subs on the market making our subs able to handle more power.. ThickFoam Surround Provides Incredible Sound Quality With Minimal Distortion. Red Stitching Cone Reinforcement Ensures Long Life. New Ultra-stiff PolyPropylene (PP) Dustcap. Impedance: Dual 4-Ohm Voice Coils. Vented Hole on T-yoke Enhances Heat Dissipation
• Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet. Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight. High BL Magnetic Motor Gap. We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated. Nomex Spider provides tear resistance, strength and long-term reliability over regular cotton and poly cotton spiders
• Cutout Diameter: 14.09 inches. Mounting Depth: 8.23 inches. Frequency Response: 32 Hz - 1.5K kHz. 10mm T-Yoke + 10mm Washer. Sensitivity: 87.9dB. Sealed Enclosure Volume:1.7 2.9 Cubic Feet. Vented/Ported Enclosure Volume:2.7 3.85 Cubic Feet. XMAX is 30mm. Weight: 34.17 Lbs.. Shipping Weight: 38.58 Lbs.. Shipping Box Dimensions: 17.72" x 17.72" x 12.4" Inches. XMAX: 30MM. Detailed Info: Body: Non-Pressed Paper. Gap Plate Inside Diameter: 95mm (3.74 inches)
• Gap Plate Outside Diameter: 190mm (7.5 inches). Gap Plate Thickness: 25mm (1 inch). Yoke Outside Diameter: 180mm (7.1 inches). Yoke Thickness: 10mm (0.4 inches). Yoke Pole Diameter: 75mm (3 inches)

User questions & answers

Question:	What amp and wiring would i need for a set of w15k9d
Answer:	Yes. Mine arrived in a generic brown box from Amazon.

Product features

2) Rockville W15K9D4 15" 10,000w Car Subwoofers Dual 4-Ohm Subs CEA Compliant

Features:

• Rockville W15K9D4 K9 Series 15" Dual 4-Ohm Car Subwoofer
• Peak Power Handling: 5000 Watts
• Program Power Handling: 2500 Watts
• CEA Rated RMS Power Handling: 1250 Watts
• 3" 4-Layer Black Aluminum Voice Coils Wound with OFC Wire Made in USA
• This voice coil is stable up to 240 degrees celcius! The voice coil windings are made in the USA
• Double Stacked 190 Oz High Quality Magnet
• Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient And Lighter Weight
• Two Chrome-Plated Binding Post Terminals
• Black Non-Pressed Paper Cone With Beautiful Finish
• Our cones are ultra-stiff. They are thicker and stronger than other subs on the market making our subs able to handle more power.
• Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
• Red Stitching Cone Reinforcement Ensures Long Life
• New Ultra-stiff PolyPropylene (PP) Dustcap

Product description

The Synergy Black Label Sub-120 subwoofer uses Klipsch Tractrix Horn technology to optimize output and low-frequency extension. An updated grille, along with the black and copper accents you’ve come to identify as the Klipsch trademark colors, create a sleek, sophisticated look for this dynamic sub.

• Spun copper front-firing Cerametallic woofers
• 12-inch, down-firing driver
• 200 watts continuous, 420 watts dynamic power
• Included components: manual

User questions & answers

Question:	What’s the difference between the 120sw and the 12sw
Answer:	Hi. To check if this car radio fits your car, please measure and compare the screen size, installation size and confirm the harness with your car. This car radio main screen size: 250(W)*145(H)mm. With metal sheet fixed on, installation size: 180(W)*75(H)*70(D)mm. It comes with a harness with naked wires, without connector. Due to the different design of the car console, some may fit perfectly, but some needs to purchase an extra dash kit or cut a piece from the dash to make it fit perfectly. Below website would help you find suitable dash kit, please come into it and type your Car Model + Car year www.metraonline.com If you have any questions or need any help, please kindly contact our support team [email protected]
Question:	The right size is 16.5, 18.5 and 14 inch
Answer:	Hi. To check if this car radio fits your car, please measure and compare the screen size, installation size and confirm the harness with your car. This car radio main screen size: 250(W)*145(H)mm. With metal sheet fixed on, installation size: 180(W)*75(H)*70(D)mm. It comes with a harness with naked wires, without connector. Due to the different design of the car console, some may fit perfectly, but some needs to purchase an extra dash kit or cut a piece from the dash to make it fit perfectly. Below website would help you find suitable dash kit, please come into it and type your Car Model + Car year www.metraonline.com If you have any questions or need any help, please kindly contact our support team [email protected]
Question:	Matching speakers
Answer:	Hi. To check if this car radio fits your car, please measure and compare the screen size, installation size and confirm the harness with your car. This car radio main screen size: 250(W)*145(H)mm. With metal sheet fixed on, installation size: 180(W)*75(H)*70(D)mm. It comes with a harness with naked wires, without connector. Some cars need to buy a dash kit box/frame and dedicated harness/adapter if you want perfitly fitted. About the original steering wheel control function, if your car need a canbus, this car radio cannot support. Other cars are ok.
Question:	whats the RMS of this one
Answer:	This car stereo is an android unit, by connect with wifi or hotspot, you can surf the internet, you can download app you like, such as TouTube, Facebook, ect. Hope this can help you. If you have any questions or need any help, please kindly contact our support team [email protected]

Product features

PERFECT HARMONY

The Klipsch Synergy Black Label Series is an amazing value in high-performance entertainment.

EASY INTEGRATION

Not only does the Synergy Series offer high-efficiency, world-class sound, the components’ sleek black ash vinyl finish complements any home decor.

LEGENDARY TECH FOR AN EPIC SOUND

Synergy Black Label floorstanding speakers, bookshelf speakers, and center channel speakers feature Klipsch proprietary Tractrix horn technology, which provides a uniform, 90 x 90 dispersion pattern and allows for placement just about anywhere.

HEAR EVERY NOTE

Synergy Black Label speakers are designed to give you an amazing sound stage with the latest technology inside these sleek speaker components:

• ALUMINUM DIAPHRAGM COMPRESSION DRIVER (TWEETER): Produces crystal-clear high frequencies
• LINEAR TRAVEL SUSPENSION: Minimizes distortion
• IMG WOOFERS: Create tight musical bass

Product description

The single best subwoofer you can get to put a little boom in your room, the Eris Sub8 is the first subwoofer to join the lauded and best-selling Eris studio monitor line. We called it Eris because it’s been designed from the ground up to be part of the family; it compliments the voicing and frequency response of the modern Eris classics The surprisingly loud 100-Watt Eris Sub8 drops down to a molar-rattling 30Hz, allowing you to both rock harder and produce better mixes, as you’ll be hearing an accurate representation of your work. Thanks to robust configuration and I/O, you’ll be able to tailor your Eris Sub8 configuration exactly to your mixing and listening needs. You can connect your existing monitors via ¼” TRS or RCA, set the input level to your liking, and even invert the polarity. Most importantly, you get a High Pass Filter and a Low Pass Crossover control that ensures your Sub8 starts working at the precise low-frequency point where your main monitors stop working. This makes sure you avoid the flubbery, smudged, low-end mess that one hears in redundant, duplicate, redundant bass reproduction that occurs without a crossover. Eris Sub 8 Compact Studio Subwoofer

From the Manufacturer

Eris Sub 8 Compact Studio Subwoofer

• 8-inch, front-firing, paper-composite low-frequency transducer with high-elastisity rubber surround
• Class AB amplifier: 100W peak (50W RMS) power
• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
• Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
• Left and right balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers

User questions & answers

Question:	I am a Motivational Speaker, can I use these with a microphone when speaking to an audience of 75 people
Answer:	I know this is too late, but this was an easy install in my Jeep using the factory stereo. It was an awesome addition to the Jeep, and is certainly a whole lot louder than a 6x9. Plus, you can tuck it under the seat or in the back in the rear tray. It wastes virtually no usable real estate.
Question:	Hola, quisiera si al comprar el E3.5 (Pair) si son los dos monitores o solo uno
Answer:	Good deep base.... although if I crank up the base on the device and adjust the radio in the car I get a little thumping.
Question:	Is the the Presonus E3.5 woofer speaker cone unprotected? It appears to have no fabric covering as many speakers would have
Answer:	Yes we have installed many of these under the seat of the Wranglers at our retail stores. It comes with all the wringing you will need. Give us a call if you would like to bundle it with some new Kicker speaker as well. 800-854-5821 M-F 9a-5pm central
Question:	Does this come with all the necessary cords to connect this to a computer? Is it rca trs or xlr
Answer:	It comes with all that. No amp kit needed. Also no need for other extras... It has everything to hook up to your stock or aftermarket system.
Question:	Have a 13 Jeep Wrangler does this connect to the factory stereo without any problems. I have the sub in the back but looking for additional punch
Answer:	I'm using a sundown sae2000. Bumps hard but you could smell the coils burning when I put it too loud.
Question:	Does this unit have good deep bass or more thump
Answer:	There is an expiration date on the box and on each individual wrapper....hope this helps these are ine of the best strips I've used they are reliable and thicker then the rest which makes reading them easier and better
Question:	I have 14' jeep wrangler 2dr. Will this kit fit under the seat? and do I need to get the amp to install this
Answer:	I’ve never seen or heard of that, and I’ve taken way too many pregnancy tests in my life. I’d probably contact the manufacturer if I were you!
Question:	It shows the power cable and fuse does it really come with these wires or will I need an amp kit
Answer:	No, it's just test strips.

Product features

The best subwoofer for Eris monitors.

The Eris Sub8 is the first subwoofer to join the lauded and best-selling Eris studio monitor line. We called it Eris because it’s been designed from the ground up to be part of the family; it compliments the voicing and frequency response of the modern Eris classics. Of course, they’ll play nice with other monitors, too, but if you’ve got a pair of Eris in your home or studio already, the Eris Sub8 is the single best subwoofer you can get to put a little boom in your room.

Maximize your frequency response and accuracy.

The surprisingly loud 100-Watt Eris Sub8 drops down to a molar-rattling 30Hz—a full 50Hz below the Eris 3.5s. This allows you to both rock harder and produce better mixes, as you’ll be hearing an accurate representation of your work. For EDM and hip-hop producers in particular, a sub is a must-have. The Eris Sub8 lets you naturally extend the reach of your Eris E3.5 or E4.5 monitors in a manner appropriate to smaller rooms; exactly where these monitors excel.

Total control and connectivity.

Thanks to robust configuration and I/O, you’ll be able to tailor your Eris Sub8 configuration exactly to your mixing and listening needs. You can connect your existing monitors via ¼” TRS or RCA, set the input level to your liking, and even invert the polarity. Most importantly, you get a High Pass Filter and a Low Pass Crossover control that ensures your Eris Sub8 starts working at the precise low-frequency point where your main monitors stop working. This makes sure you avoid the flubbery, smudged, low-end mess that one hears in redundant, duplicate, redundant bass reproduction that occurs without a crossover.

Accuracy defined.

When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. You’ll also have more fun.

All work and all play.

While we’ve designed the Sub8 to compliment our smaller-form Eris media reference monitors, we also know that gamers, partiers, and movie buffs alike all enjoy some room-rattle now and again. So rest easy knowing that the Eris Sub8s will upgrade the performance of any powered speaker configuration in a home theatre or gaming rig.

Product description

This Package Includes the Following Items:

• 1 x Kicker DXA125.2 Car Audio DX Series 2 Channel Amplifier 240W Peak 43DXA1252 Amp
• 1 x Harmony Audio HA-AK10 Car Stereo Complete 10 Gauge 600W Amp Amplifier Install Kit - Nickel
• 1 x Single 10" Subwoofer Regular Standard Cab Truck Sub Box Enclosure 5/8" MDF
• 1 x Kicker 43C104 10" Comp C10 Series Sub 150W RMS 4 Ohm SVC Car Subwoofer

Kicker DXA125.2 Car Audio DX Series 2 Channel Amplifier 240W Peak 43DXA1252 Amp:

Features:

DX Series 2 Channel Car Amplifier

RMS Power Rating:

• 4 ohms: 30 watts x 2 chan.
• 2 ohms: 60 watts x 2 chan.

Frequency Response: 10 - 20,000 Hz

Variable low-pass filter (50-200 Hz, 12 dB/octave)

Variable Bass Boost: 0-12dB @ 40Hz

Input Sensitivity:

• Low Level: 125mV - 5V
• High Level: 250mV - 10V

Dimensions: 8-1/8"W x 7-3/16"D x 2-3/8"H

Harmony Audio HA-AK10 Car Stereo Complete 10 Gauge 600W Amp Amplifier Install Kit - Nickel:

Single 10" Subwoofer Regular Standard Cab Truck Sub Box Enclosure 5/8" MDF:

Features:

• Single 10" Truck Sub Box
• Mounting Depth: 5-5/16"
• Air Space: 0.8 Cubic Feet
• Sealed Enclosure
• Dimensions: Width 20" x Height 15" x Top Depth 5" x Bottom Depth 7-1/2"
• Designed to fit behind the seat of most trucks.
• Constructed with High Quality MDF
• High Quality Gray Carpet

Kicker 43C104 10" Comp C10 Series Sub 150W RMS 4 Ohm SVC Car Subwoofer:

Size: 10"

Impedance: 4 Ohms SVC

Power Watts: 300W Peak / 150W RMS

Sensitivity: 86.2 dB

Freq. Response: 30-500 Hz

Mounting Depth: 5-1/16"

Mounting Diameter: 9-1/8"

• Kicker C10 Subwoofer Single 10" Regular Cab Truck Sub Box Enclosure Bundle with Kicker 43DXA125.2 Amp

Product description

The 6" tall Dayton Audio SUB-1000L low-profile powered subwoofer fits virtually anywhere: between furniture, behind sofas, beneath coffee tables, and other places that an ordinary sub box can't go. Slim size doesn't mean skimpy bass output, thanks to the SUB-1000L's 10" driver and powerful built-in amplifier.

• Ultra-slim subwoofer cabinet installs anywhere...down-firing, side-firing, whatever you need
• Full-sized 10" woofer and powerful 100 watt amplifier produce big bass output
• Clever bass-reflex design for muscular bass from an enclosure that's a mere 6" thick
• Included floor stands and on-wall mounting brackets facilitate a variety of mounting schemes
• Unobtrusive, textured black vinyl finish complements any decor

User questions & answers

Question:	Does your auto on/off function work with yours? I'm seeing reports of problems. Wondering if it's common
Answer:	Find a mono block d class at least 800 watts.
Question:	does the subwoofer come with audio cables
Answer:	Define shallow... Is this a spoof question?
Question:	Does the Dayton 10 inch slim subwoofer have auto shut-off
Answer:	Every one of these answers are total garbage and lack of impedance knowledge. Depending on whether you're running them in a series or parallel, or a series parallel, this changes the ohm load to the amp. 4 ohm dvc subwoofers can be wired in a 4 ohm load down to a 1 ohm load, depending on wiring and number of subs. A dvc 2 ohm speaker can be wired down to as low as a .5 ohm load or a 2 ohm load. You better quality sound the lower the ohm load, make sure both speakers and amp are capable of carrying the same load.
Question:	Does the 6" height include the feet? Or is that the size of the enclosure alone
Answer:	6.25 inches
Question:	What amp will work with two 12s
Answer:	There are better choices for that -- you want speakers with a built-in mic preamp, and probably higher wattage amplifiers. You may also want folding speaker tripods. I suggest you puchase speakers designed for this, with a tripod screw hole on the bottom, and XLR mic inputs. For example, Bose EONS sound amazing for music as well. You may also wish to purchase a good wireless mic. Think of it as a system. The size of the room and the audience determine the required size and power of speakers.
Question:	Is this a shallow mount sub
Answer:	son dos monitores, uno principal y el otro esclavo. Saludos.
Question:	I'll install sub with a mono amp. What's the difference between 2 ohms and 4 ohms sub? Can I use it with my amp
Answer:	Take a piece of t-shirt and bring it back and forth between your face and the monitors.. you will hear that even something like a tshirt of pantyhose, has a considerable effect on the sound projection. Also, having grills on the speaker looks cheap imo..
Question:	What is the mounting depth
Answer:	It depends on which speakers you order. The 3.5 and 4.5 come with everything necessary, but the 5 and higher definitely do not come with everything you need. Just the speaker and AC adapter.

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

• 10" Shallow Subwoofer Down-Fire Sealed Enclosure
• Peak: 1200 watts | RMS: 400 watts
• Impedance: 4 Ohm | Frequency Response: 30Hz - 500Hz | Sensitivity: 95dB
• Spun Aluminum Cone | Rubber EPDM Surround | Copper Wound Kapton Voice Coil | MDF Construction
• Dimensions: 18.7" W x 6.1" H x 12.2" D

Product description

Package Includes 2 x Rockford 10 Inch Subwoofers 1 x Dodge Ram Subwoofer Box Enclosure Subs with need to be wired and placed into box! This Pair of **ROCKFORD FOSGATE R2D2 10** 1000 Watt 10" 2 Ohm Prime Series DVC Subwoofers deliver optimum Rockford Fosgate sound quality. Each R2D2 10 subwoofer features a Mica injected polypropylene cone, a Stamp Cast basket with spider venting, 12 gauge compression terminals, anodized aluminum voice coil former, PVC trim ring, a linear spider with 16 gauge tinsel leads, and a Dual Voice Coil that provides greater installation flexibility. Also included is a Dual 10" Vented Subwoofer Enclosure! Let these two ROCKFORD FOSGATE R2D2 10 1000 Watt 10" 2 Ohm Prime Series DVC Subwoofers supply your vehicle with thumping bass! The **Q Power 10"** Sub Box Enclosure is custom made for Dodge Ram Quad Cab Trucks, model year 2002 or newer. This enclosure is designed to fit underneath the rear seats and boasts .65 cubic feet of air space. The **Q Power 10"** subwoofer box also features a charcoal carpet covering and terminal cup connectors. Turn your ride into a sound machine with the help of the Q Power 10" Subwoofer Enclosure! If you want the most output for your money, this is the way to go. Please note: This Sub Box is made for all Dodge Quad Cabs EXCEPT for Dakota Read the Subwoofer Owner's Manual [here][1] Read the Subwoofer Specifications [here][2] [1]: http://www.rockfordfosgate.com/rftech/library/2011/5_Subwoofers/1230_56566_01_PrimeR2Sub MAN.pdf [2]: http://www.rockfordfosgate.com/rftech/library/2011/5_Subwoofers/RFPB_R2D2 10 TS_RevE.pdf @[video](p1 dgCyvOZs)

• **Subwoofers**
• NEW Pair **ROCKFORD FOSGATE R2D2 10** 500 Watt 10" 2 Ohm Prime Series DVC Subwoofers
• Max Power: 500 Watts for each Sub (1000 Watts for the Pair)
• RMS Power: 250 Watts for each Sub (500 Watts for the Pair)
• Quantity: 2 Subwoofers Total

User questions & answers

Question:	Will it fit 2008 Ram
Answer:	I read the same comments but mine works perfectly. It shuts off after 2 minutes as I recall and it comes back on when needed immediately. I am guessing they changed the design a little or something. Actually, I can't ever tell it has shut down as there is no snap, buzz or whatever when it comes back on, it just comes back on... I did confirm via the lights on it, the unit does shut down and come back on.
Question:	Will this fit for a 2012 Ram Crew cab
Answer:	No. Aside from the wired AC power cable.
Question:	Are these 1000w each or 500 peak because i orders thes and they are only 500w peak and it says in the description 1000w
Answer:	It has three power settings. An Auto, On, and OFF. Great subwoofer! Been using them professionally for over 15 years.
Question:	Is this box sealed or ported
Answer:	No, it is the enclosure size alone.

Product description

Dayton Audio's SUB-1000 active subwoofer speaker system features a powerful 100 watt internal amplifier and heavy duty high-excursion 10" driver. Home theater bass effects were never easier to achieve! The Dayton Audio SUB-1000 10" powered subwoofer system is the perfect addition to any home theater system. This powered sub features a bottom-firing, flared port, bass reflex design for reduced port noise and increased bass response. It also utilizes a long-throw 10" woofer and up to 100 watts of house-shaking power. The amplifier features high and low level inputs and high level outputs, a phase switch, independent volume control, an auto on/off switch (activated by an input signal) and a variable 12 dB electronic low pass filter. This compact sub is finished in an unobtrusive black vinyl that will complement any decor.

• Downward-firing flared port design for clean, powerful bass
• Selectable "Auto-on" mode
• Heavy-duty long-throw 10" woofer
• Perfect for small home theaters or listening rooms
• Unobtrusive textured black vinyl finish

User questions & answers

Question:	Will this Sub work for replacing a Passive Sub on a Samsung Home System
Answer:	I did not fit in my 2005 without some modifications of the corners to get it to sit low enough for the seat to go al the way down.
Question:	Anyone connect this to the dayton audio dta-120 with bookshelf speakers
Answer:	They should fit
Question:	If this will 95% be used to listen to music (mostly jazz and improv music like the grateful dead) should I go with the 10" or the
Answer:	500 peak together they would make 1000 peak but i wouldnt run no more than 400 per sub or you will blow them up
Question:	Is it worth the extra money for the 1000 instead of the
Answer:	Sealed

• Echo Sub delivers down-firing, 100W deep bass sound through a 6" woofer.
• Pair with one Echo device to enjoy dynamic music that fills the room.
• Pair with two of the same Echo devices for rich left/right stereo sound.
• Simple to set up and use—just plug in, open the Alexa app, and wirelessly connect to your Echo device(s) to control music with your voice.

User questions & answers

Question:	Will this connect to tv or firetv? seems almost useless if not
Answer:	if your question about DATA, then there are both a wired (Ethernet) and wireless version, which is not wifi but cellular (included in the price, so you don't need to pay extrq zvery month). However, for POWER, this has to be hardwired. Unlike Ring consumer products it does not have a version with a rechargeable battery.
Question:	Is sub compatible with 1st gen echos
Answer:	Yes. My controller (when using my ring app) works just exactly like my remote control (which is a gate/garage door opener). 1 click open, 2nd click stops gate anywhere in the middle, 3rd click makes gate go in the other direction to close.
Question:	I just want to make sure that i understand , if i get the sub and use my echo 2nd generations with it, i can not use my group everywhere with the sub
Answer:	My electrician installed it. He said it was straight-forward. However, the setup was done over the phone with Amazon. A bit tricky, but we got it working. Has worked great for well over a year!
Question:	Only compatible with 2nd generation echoes
Answer:	Ridiculously, no. Both Key by Amazon, and Ring have the notion of shared locks with permissioned access and guests. However, neither of them support this functionality for the RAP. That means that my wife and I had to go back to sharing our Ring logins to be able to have both of us open the gate.