11 best home theater subwoofer

Product description

Add robust bass impact to movies and music with the black Klispch R-12SW 12" Subwoofer. This front-firing subwoofer features a 12" copper-spun woofer and delivers up to 400W of power. With a frequency response of 29 - 120 Hz, this model is equipped to handle a wide variety of listening material. Integrated low pass crossover and phase control settings allow you to optimize the sound of the subwoofer in your listening environment. For installation flexibility, LFE and line level inputs are onboard.

• Powerful 12" copper-spun front-firing woofer
• All-digital amplifier delivers 400 watts of dynamic power
• Equally impressive with music and movies; Brushed black polymer veneer cabinet with satin painted plinth
• Low pass crossover and phase control
• Line/LFE inputs for compatibility with most receivers

User questions & answers

Question:	Is this a powered sub? And how many watts does it have
Answer:	Hi Mike, I saw your question and wanted to give you the correct answer. The phase switch determines the way the subwoofer cone ( speaker ) reacts. When set to "0" the speaker cone will move in the outward direction at the same time ( phase ) of your main ( left & Right ) speakers. When it is set to "180" the speaker cone of the sub will move inward when your main speakers' cones are moving outward. What this does is cancel out any overlapping frequencies between your main speakers and your subwoofer. When you have overlapping frequencies between your sub and main speakers you will get too much or "bloated" mid bass. Some people prefer "180" because they feel the cancelled out frequencies produces "tighter" and more accurate bass. Other people like more mid bass, so you need to listen to it both ways to find which you prefer. The same thing will happen if you hook up speakers with the speaker wires hooked up with positive & negative swapped ( positive speaker wire in the negative speaker terminal and negative speaker wire in the positive speaker terminal ). Just as an added note, the "Low Pass" filter knob will determine what lower frequencies pass through from your receiver to your subwoofer. The higher the frequency (Hz) the more mid bass the sub outputs and the lower the frequency (Hz) the less mid bass that the subwoofer outputs. You want the subwoofer to optimally blend with your main speakers and that is what the "low pass" filter knob allows you to do. If you are using a surround sound receiver and it is set for Dolby Digital or DTS surround modes receivers will normally automatically crossover the sub output at 80 Hz, so moving the Low pass knob on the sub beyond 80 Hz will have no effect. Now, if you have a surround receiver that utilizes the Audyssey Microphone system to adjust the surround parameters you will want to set the subwoofers low pass knob all the way to the highest frequency. The Adyssey system will determine what frequency blends best with your main speakers. Hope this is helpful.
Question:	What gain setting do you have your subwoofer set to? I want as much bass as possible from my audio sources (tv, games, movies, etc
Answer:	Yes, there is base and treble adjustment, as well as Vizio truVolume adjustment. We have two of these, I have been impressed with the richness of the sound on this particular model.
Question:	Are the surrounds foam or rubber...getting tire of foam
Answer:	yes , it will right out of the box.
Question:	What does the phase toggle do? I read ther manual, but it didn't explain it in a manner I could understand
Answer:	This sound bar uses Bluetooth version 4.1.

Product features

HAPPINESS IS COPPER AND BLACK

The Klipsch Reference subwoofers feature powerful copper-spun front-firing woofer and an all-digital amplifier to deliver dynamic power like you've never felt before.

• Features: Rockville Rock Shaker 10 Black 600 Watt Powered 10" Home Theater Subwoofer, 600 Watts Peak / 300 Watts RMS, Built-in Class D Amplifier, Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board), High-grade vinyl enclosure covering with a beautiful finish, The enclosure is built with the perfect air space to maximize sound quality and punch, The rear firing port is engineered for optimal sound
• Class “D” Amplifier Circuitry with Auto-Switching Power Supply, High-grade woofer with foam surround and paper cone, Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire resistant poly cotton, Detachable foam grill
• Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High level inputs, Speaker High level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included
• Specifications: Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1<1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz - 200 Hz, 600 Watts peak output, 300 Watts RMS output, Voltage: 110-240V, Product Dimensions in Inches: (W*H*D): 12.6'' x 15.5'' x 16.5'', Shipping Dimensions in Inches: (W*H*D): 15.7" x 19.7'' x 18.5'', Unit Weight: 20 LBS, Shipping Weight: 24.5 LBS, Color: Black
• Rear side of the subwoofer: Subwoofer (LINE) Jack in, Subwoofer (LINE) Jack out, Volume Control, Phase switch (0° - 180°), Frequency control, Power switch, Speaker high level in, Speaker high level out??

User questions & answers

Question:	Will the sub work with the rockville hts56 home theater system
Answer:	I purchased this clock for my Mom and it was not the best selection for her. The reception was bad and it was hard to set the time. I kept it too long otherwise, I would have sent it back.
Question:	Wich speakers recommend for replacement I have two rockville Shaker 10" that are blown and i would like to up grade to handle more bass
Answer:	yes
Question:	I hooked up rca red and white cables from my soundbar on rca and aux mode. why there's no sound of people talking coming out this subwoofer
Answer:	Yes it does.
Question:	Will this work with a vizio sb2020 sound bar with a sub out
Answer:	I am not 100 % certain. Its metric size. I always guard it like gold 
Question:	does it have a cord? or is it with battery only. can I have it connected to the electricity
Answer:	This item (31874) is the replacement pilot bit for the Klein Carbide hole cutter.
Question:	Which am/fm clock radio has the best reception
Answer:	I have both sitting in front of me the klein is a hair smaller diameter than the ideal. the klein will fit the ideal but the ideal bit will not slide all the way into the klein. the idealis the better bit design and the greenlee is better still. I kept snapping the klein even trying to baby it and had to buy a Ideal to finish the job.
Question:	Does this alarm/radio have alarm repeat so i don't have to reset it every evening
Answer:	Yes.
Question:	Does this alarm/radio have alarm repeat so i don't have to reset it every evening
Answer:	it's all combined the pouch is included. i suppose if you drilled out the rivets you could remove the attachment pieces and you could somehow install them to any other pouches if you wanted. seems like a lot of work for an already expensive item though

Product description

Add deep bass excitement and extended dynamic thrills to your music or movie sound system with the easy-to-connect and easy-to-use PSW 10. Its 10" Dynamic Balance composite cone driver and non-resonant enclosure produces deep, smooth response with superior detail and accuracy, while limiting distortion. The sub is powered by a high-current amplifier producing 50 Watts RMS/100 Watts dynamic power. A rotary volume control adjusts the volume of the subwoofer relative to the other speakers in the system and the unit offers a continuously variable low-pass filter, adjustable from 80-160 Hz. Easily accessible, professional-grade line- and speaker-level inputs, and speaker level outputs, allow easy connection to any system.

• POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
• LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
• Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt rms amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
• EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
• A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete

User questions & answers

Question:	What in your opinion is the best power setting for normal use, "on" or "auto" for this unit
Answer:	I would say depends if you use the item everyday/constantly as your sound for your surround. Or if you use surround/theater occasionally. If the latter I would use `on/off` , if you use it often or primarily the auto would be the way to go in my opinion. Plus is the sub easy to get to? Auto is great if its behind furniture or out of reach,etc.
Question:	Does this speaker have a volume control? Thanks
Answer:	Just to clarify something a previous reviewer stated: "Note: If you are using a Sub out/LFE connection from your receiver turn the Low Pass all the way up. " This does not apply to receivers with which you can specify the low-pass cutover frequency. For example, my modest Onkyo receiver has cutover settings of 80/100/120 HZ for the LFE/Sub output. If you have this option, you should consult your main speaker's manual for suggested low-pass settings or simply tune them by ear. For my setup, 120 HZ was both the recommended and best-sounding cutover frequency. 160 HZ was a little muddy :)
Question:	Can this sub be added to a Vizio 2.0 sound bar, for small to medium-sized HDTV's? If not, what should I get? For TV/Games/Music
Answer:	Like John, I too have a Vizio 2.0 sound bar and this pairs very well. I have a small theater room (10 x 20) and this one 10" fills the room. This sub is the best bang for the buck you can get.
Question:	Do I need a Y-adpater? A sound tech told me one sub wire would do the trick and just plug it into the L and ignore the R. Is this true
Answer:	Initially, used a one wire connection. Sounded OK, but .... Got a "Y" connector, attached at the rear of the amp, ran L & R wires to the PSW10: sounds amazing now and very adjustable. Need to get the PSW12 to get a one wire connection. Am very satisfied with this sub and would recommend it. Used in a 12' X 20' room, front/back/center and now the sub. Tom

Product features

Single 10" Subwoofer

• PSW enclosures are designed and engineered for perfect volume, minutely tuned for distortion-free low frequencies, and internally braced and damped to eliminate internal standing waves and other performance-robbing resonances.
• This unique configuration uses a specially tuned and directed port to more efficiently produce maximum bass impact.

100 Watts

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more "escaped washing machine" syndrome.

Laser-Based Klippel Measurement Technology

Our state-of-the-art Klippel distortion analyzer optimizes the woofer's motor structure, voice coil alignment and suspension for smooth, unimpeded movement over a broad spectrum of the lower frequencies to ensure the best, most efficient performance even at extreme listening levels.

Resonance-Free Dynamic Balance Driver Materials

PSW Series subwoofers outperform the competition with durable, resonance-free Dynamic Balance driver materials that stay stiff and move fast. You experience deep, musical low frequencies and thrilling effects with superior system blending.

Easy Connection to Any System

Inputs

• Audio Inputs: Stereo Line Level - RCA, Pair (L/R) Analog RCA.
• Speaker Inputs: Pair of Spring Terminals.

Outputs:

• Audio Outputs & Speaker Outputs.
• Pair of Spring Terminals.

Unique Design Keeps Your Subwoofer Stable

Unique design keeps your subwoofer stable and steady even at radical volume levels, for more efficient use of power. No more 'escaped washing machine' syndrome.

Product description

For more than 50 years, midrange and high frequency horns have been the hands-down choice for movie theater sound engineers. From the softest whispers... To the highest impact sound... Hrn drivers have no equal when it comes to clarity and dynamic range. The BIC Formula Theater Series carries on the legacy of the first Formula Series introduced in 1973. They offer an output capability of up to 116dB (live rock band levels), while offering refinements that surpass all of its predecessors. Injection molded long throw woofer; BASH designed amp. Adjustable crossover, volume and auto on/off. Speaker level and RCA inputs. Frequency response: 25Hz-200Hz. 15" W x 17" H x 18 1/4" D. Sold individually.

The 12-inch, front-firing F12 powered subwoofer from BIC America incorporates a high current 475-watt peak amplifier designed by BASH Technology in combination with a 12-inch injection molded long-throw woofer. A patented BIC "Venturi" vent eliminates port noise, which is often heard from other subwoofers especially when playing demanding music and videos. The F12 also features an adjustable crossover, adjustable volume control, automatic signal sensing, high level inputs, and both Dolby Pro Logic and Dolby Digital/DTS inputs.

Front of the F12 (see larger image).







Rear of the F12 (see larger image).

Specifications

• Design: Front-firing 12-inch, 475-watt peak powered subwoofer
• Frequency Response: 25Hz - 200Hz
• Sensitivity: 90dB
• Drivers: 12-inch injection molded woofer with heavy duty surround
• Magnetic Shielding: Yes
• Gold-Plated Terminals:Yes
• Recommended Power: Built-in Amplifier Power: 475 watts Dynamic Peak, 150 watts RMS continuous
• Impedance: 8 ohms
• Dimensions: 21 x 19 x 22 inches (HxWxD)
• Weight: 42.70 pounds each
• Warranty: 5 years parts and labor

From the Manufacturer

For more than 50 years, midrange and high frequency horns have been the hands-down choice for movie theater sound engineers. From the softest whispers... To the highest impact sound... Hrn drivers have no equal when it comes to clarity and dynamic range. The BIC Formula Theater Series carries on the legacy of the first Formula Series introduced in 1973. They offer an output capability of up to 116dB (live rock band levels), while offering refinements that surpass all of its predecessors. Injection molded long throw woofer; BASH designed amp. Adjustable crossover, volume and auto on/off. Speaker level and RCA inputs. Frequency response: 25Hz-200Hz. 15" W x 17" H x 18 1/4" D. Sold individually.Item is Hazmat Non-returnable

• Powered subwoofer with 12-inch injection molded long throw woofer; BASH designed amp
• Patented BIC "Venturi" vent eliminates port noise
• Adjustable crossover, adjustable volume control, automatic signal sensing
• Inputs for both Dolby Pro Logic and Dolby Digital/DTS
• Backed by 5-year warranty

User questions & answers

Question:	This has Inputs for both Dolby Pro Logic and Dolby Digital/DTS. I play music/vids in both modes. How does this work, re: cable placement
Answer:	Setting the switch to Dolby Pro Logic utilizes the Sub's built-in cross-over were Dolby Digital by-passes it and utilizes your receivers LFE filtering. You choose the mode, based of your receiver and the type of signal you are feeding it.
Question:	Do I still need to buy an AV receiver to use this sub
Answer:	The sub has a built in amp but it needs a sub signal from some source - maybe from your aluminum foil helmet
Question:	How do I connect this subwoofer to my receiver if I do not have a sub output located on the back
Answer:	I agree that getting a receiver with an RCA sub woofer output is best, a regular sub woofer output is second best and a regular speaker output is third. If it is a regular speaker output, see if your receiver will allow you to customize the output for that line. USE SHIELDED WIRE WHEN YOU CAN. My BIC picked up interference until I put in shielded cables. Twisted-pair may also aid in preventing extraneous noise.
Question:	I'm considering purchasing the BIC America F12 Subwoofer, however, I see conflicting information in regards to the measurements. Can someone tell me the correct measurements of the speaker? Not shipping, not in the box size, just the actual size when out of the box. Thank you
Answer:	One often sees two discordant product measurements on Amazon. The larger is always for the box (which no one cares about, at all). So the smaller is always the product measurement. Of course, sometimes you might only have one measurement and that could possibly be the box, which indicates sloppy imprecision from the distributor and makes you wonder what else is wrong. Others correctly answered your question so I won't (17H x 14-7/8W x 17-3/4D).

Product description

This compact subwoofer incorporates a number of Yamaha's advanced, high-performance bass technologies, such as Twisted Flare Port, Advanced YST II (Yamaha Active Servo Technology II) with discrete amp circuitry and a high-quality 10" woofer unit. The resulting bass response is powerfully rich and impactful.

• New twisted flare port contributes to clear and tight bass
• Advanced YST II (Yamaha Active Servo Technology II)
• 10” cone woofer
• Stylish addition to any room

User questions & answers

Question:	Does it come with the necessary audio cable
Answer:	Power cord ONLY.
Question:	What"s the difference between the sw50 and sw100, except for 8" cone and 10" cone
Answer:	100 has slightly lower freq response 25 hz vs 28 hz
Question:	Does this subwoofer have auto shut off or does it need to be turned on and off each time you use it
Answer:	It's manual on and off but if your receiver has switched outlets (which is common) you can plug the power cord into one of them and then this subwoofer will turn on and off with your receiver.
Question:	Is this a wooden box or plastic
Answer:	It's wood. Only drawback is you have to manually turn on and off. Doesn't activate automatically when receiver is turned on. Otherwise a great sounding unit for the money.

Product features

Powered Subwoofer

Excellent Bass for Movies and Music.

This subwoofer incorporates a number of Yamaha advanced, high-performance bass technologies, such as Twisted Flare Port, Advanced YST II (Yamaha Active Servo Technology II) with discrete amp circuitry and a high-quality 10" woofer unit. The resulting bass response is powerfully rich and impactful.

Clear and Tight Bass

The new Twisted Flare Port takes advantage of extensive subwoofer development experience. The gently twisting flared shape creates a smooth flow of air around the edge of the port versus the turbulent air flow around a conventional port. This reduces extraneous noise not present in the original input signal and provides clear, accurate low frequency reproduction. From special effect sounds in movies to the atmosphere of a live venue, you hear bass that is clear, tight and realistic.

Deep Lows

Developed by Yamaha, the Advanced YST II (Yamaha Active Servo Technology II) combines negative-impedance and constant-current principles to drive the speaker cone with even tighter control than the previous version. Using Advanced Negative Impedance Converter (ANIC) circuits, this system dynamically optimizes effective speaker impedance to maintain excellent linearity. This means more stable and accurate low range response, not to mention higher sound quality.

More than a Black Box

The gently rounded form with a slanted front surface is stylishly elegant. Designed to be unobtrusive, it’s sure to look beautiful in a living room or home theater room and will match a wide range of speaker systems. More than a black box, it’s the heartbeat of your home theater system.

Product description

There are few home entertainment experiences that cannot benefit from the extended base that a subwoofer can provide. Maybe not charades, but ideally everything else. Music, movies and games will have the extra something that they have been missing with the addition of the r–10sw to your home theater. The front firing 10 inch subwoofer offers the flexibility of placement in any room for pulse pounding bass on demand.

• Powerful 10" copper-spun front-firing woofer
• All-digital amplifier delivers 300 watts of dynamic power
• Equally impressive with music and movies
• Low pass crossover and phase control,Dimensions:14(H) x 12.5(W) x 15.7(D) Inches
• Line/LFE inputs for compatibility with most receivers

User questions & answers

Question:	Do i only need this to play music or do i have to connect some speakers or something
Answer:	Absolutely yes! Subs only handle low frequencies (boom boom!). All mid, high frequencies are handled by main speakers (either 2 or 5 or more depending on what your receiver can support). And yes, you will need a receiver as well to connect subwoofer and main speakers.
Question:	does this sub have an auto on/off where it shuts on and off with a signal from turning off/on your reciver
Answer:	I just checked, the green power light stays on but I believe the sub shuts off automatically to standby just like the satellite speakers once the receiver is powered off.
Question:	Can I connect this to a pioneer cx
Answer:	From what I can see online it doesn't look like it has a powered sub woofer port on the back panel. Without that I don't believe it will work.
Question:	Does this item come with a black grill cover
Answer:	Yes, it came with black detachable grill cover. FYI, cover made out of fabric type material.

Product features

HAPPINESS IS COPPER AND BLACK

The Klipsch Reference subwoofers feature powerful copper-spun front-firing woofer and an all-digital amplifier to deliver dynamic power like you've never felt before.

Product description

Acoustic Audio's Audiophile Series powered subs immerse you in the action of your fast-paced movies and sports. Add impact to your favorite movies and full-bodied bass to your favorite tunes with a sub that's barely a cubic foot. Its stylish design and superior sound make it a smart addition to any home theater. Its elegant black ash finish is refined and complements most flat-panel displays. It features a high-current, 500-watt amp which effortlessly drives its down-firing 12" woofer for dynamic low-frequency effects. The high and low inputs let you use any receiver or processor. The 12" woofer utilizes a long excursion cone for deep, accurate response. The MDF bass-reflex enclosure features internal bracing, and a 24Hz to 250Hz frequency response delivers thumping bass from all your action movies and CD albums.

• HOME THEATER POWERED SUBWOOFER - Standard RCA inputs easily connect to your home theater receivers dedicated Subwoofer Output. Save power with the added Signal Sensing Auto ON/OFF feature
• 500 WATTS PEAK POWER - Integrated high efficiency power amplifier, 24 - 250 Hz with 98dB at 8ohm, Auto ON/OFF and 0 - 180 degree Phase control switches, Gain and 40 - 140 Hz Crossover control knobs
• 12 INCH DOWN FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet design with vibration absorbing feet, high quality MDF with added internal bracing and black ash finish
• SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any home theater receiver with dual or single RCA dedicated Subwoofer passive output, home receiver or stereo with raw wire outputs. Use for home theater and surround sound systems
• WHAT'S IN THE BOX - Acoustic Audio by PSW-12 powered subwoofer, 6 foot dual RCA cable, RCA "Y" adapter, instruction manual - Standing sub with feet size is (H x W x D) 13.8" × 13.4" × 14.6" - NOT LFE Compatible
• Included components: 1 Powered Subwoofer Speaker, 1 Dual RCA 6 Foot Cable, 1 RCA "Y" Adapter, Instruction Manual

User questions & answers

Question:	Pictures for the 15" sub doesn't look right. Does anyone know if the pictures are legit
Answer:	You are correct. As of the time of this response, the picture for the 15" model is actually the picture of the 6.5" model. The correct picture can be found on Acoustic Audio's website at http://www.acousticaudio.net/psw15.html.
Question:	I currently have a onkyo receiver hooked to a 5.1 surround by LG..my sub is not aux hookup only speaker cable so i must get a powered sub. Would this
Answer:	Yes you can use the sub woofer with your receiver.
Question:	Does it have a three prong power plug that includes a ground connection
Answer:	No, it's just a duel plug, and no ground connection. Hope that helps. For such a small sub it hits pretty good. I have it set up in my bedroom 2 front speakers and it, and the quality is great.
Question:	I just got this today and was hoping to hook it up to the aux output of my stereo. no sound. do i have to use speaker input instead
Answer:	Make sure that your stereo is actually sending signal through your auxiliary outputs. Then make sure that your gain knob is turned up. This amplifies the incoming signal. If you still aren't getting any sound, you could try connecting a live speaker cable to the high level in. The signal will be converted to low frequency. You could use your Speaker B output on your stereo to do this. Just make sure that the B speakers are on on your stereo as well. Also make sure your subwoofer is plugged in and turned on, classic troubleshooting.

Product features

About us

We manufacture the highest quality audio products in the industry. We are a direct to consumer company cutting out the middle man ensuring you receive the quality product.

Product description

Klipsch R-100SW 10" subwoofer | Incredibly deep bass and an all-digital amplifier.

• 10" front-firing spun-copper IMG woofer
• All-digital amplifier with 300 watts peak power
• Volume low pass crossover and phase control
• Line level/LFE RCA inputs for maximum receiver compatibility
• Dimensions 14 5" x 12 5" x 16 4"
• Frequency response: 32Hz - 120Hz +/- 3dB
• Amplifier power (Cont/Peak): 150W/300W
• Amplifier features: Volume, low-pass, 0/180 phase, Auto power on

User questions & answers

Question:	Dose it work at 220 volt
Answer:	It will work. It’s 100-240V
Question:	Is it support voltage 100~240V
Answer:	Yes
Question:	is this product working from 220 voltage
Answer:	It will work. It’s 100-240V
Question:	What kind of cable do i need to make this work with klipsch the sixes speakers
Answer:	If this speaker follows the usual Klipsch subwoofer convention, you just need a single cable with RCA/phono/coaxial plugs at both ends. You have to plug it into the jack labeled "L/LFE". If you are sending separate left and right subwoofer signals, then this jack is for the left signal. If you just have one signal, then it treats it as a single LFE signal; that is, like the ".1" part of 5.1 or 7.1 audio. If the jack is simply labeled "L", then you might need an RCA jack to two RCA plugs Y adapter. For a definitive answer, look in the manual, but I suspect that it will handle a common subwoofer signal on the left jack like previous Klipsch subwoofers.

Product features

SPUN-COPPER IMG WOOFER

Injection Molded Graphite (IMG) woofer cones are exceptionally light while being extremely rigid – providing remarkable low frequency response, with minimal cone breakup and distortion to give you the deepest, cleanest bass possible.

All-Digital Amplifier

The built-in, all-digital amplifier of the Reference Series subwoofer delivers ample power with high efficiency and true-to-source accuracy reproduction - thus providing maximum output, detail, and power that fills your home.

CUSTOMIZED BASS

The Reference Series subwoofer gain, low pass crossover, and phase controls ensure the low-frequency tones blend with other speakers and establish the ideal level of bass for your room.

Line level/LFE RCA inputs provide maximum compatibility with standard home theater receivers.

FLEXIBLE PLACEMENT

The high-performance, front-firing driver was designed to provide deep bass regardless of its location in the room to give you more placement options.

Product description

This is an 8-Inch powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers. The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output. High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier. Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA -Inch-Inch cable to split the output and send it to the two line level inputs on the subwoofer. The subwoofer is housed in an attractive black wood cabinet that measures 13.75-Inch x 11.75-Inch x 11.75-Inch (H x W x D). The driver and a 2 3/4-Inch sound port are located on the front, covered by a black cloth speaker grill. Amplifier Power Output: 60 Watts (RMS).

• This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
• The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
• High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
• Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
• The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.

User questions & answers

Question:	What is the return policy
Answer:	You can go through Monoprice- their customer service is incredible
Question:	What are the dimensions of the cabinet? description says 13.75-inch x 11.75-inch x 11.75-inch (h x w x d). info says 14.8 x 16.1 x
Answer:	11 7/8" wide 13" tall with feet attached 11 3/4" deep BUT add 1/2" for the connections that stick out the pack, perhaps a bit more to allow for the cables to plug in.
Question:	How tall is it without the feet, are the feet removable
Answer:	feet are removable and height without feet is 11 and 13/16ths
Question:	I only have 1 3.5mm out to subwoofer. if a use a 3.5mm to rca cable will it work ok
Answer:	Use a 3,5mm to 'Y' RCA cable (adapter). JSAUX makes a good one, I use it from my ZVOX to subwoofer. JSAUX RCA Cable, [6.6ft/2M, Dual Shielded Gold-Plated] 3.5mm Male to 2RCA Male Stereo Audio Adapter If you need more length just get a male-to-female 3.5mm extender/headphone cable.

Product features

About Us

We exist to bring simplicity, fairness, & confidence to technology choices.

Established in 2002, we have built a stellar reputation for product excellence. We offer over 7,000 high-quality, electronics and accessories to professionals and consumers worldwide. Our proven business model eliminates entire layers of markup within the supply chain, which allows us to sell premium products.

Product description

Introducing the all-new VIZIO 36” 2.1 Sound Bar System that instantly upgrades your home theater experience.

TV shows, movies, and sport games are enhanced for a room-filling audio experience with a wireless subwoofer

For booming bass. It's Bluetooth compatible, so you can stream music from your mobile device in high quality, too.

With all audio cables included, it’s an easy setup from start to finish.

• Performance 3 total speakers create louder, clearer, and more powerful sound.
• Wireless Subwoofer Experience deep, booming bass with the wireless subwoofer.
• DTS Virtual:X sound enhancement creates room-filling, floor-to-ceiling multi-dimensional sound.
• Bluetooth Stream music wirelessly from your phone or any compatible Bluetooth device.
• Easy Setup All audio cables included.
• Dimensions

User questions & answers

Question:	Does it have hdmi arc
Answer:	No, doesn’t have an hdmi input/output. But it does have an optical output and the cable is included.
Question:	Is this compatible with Fire TV
Answer:	We recommend connecting this to the TV that will have the Fire TV attached.
Question:	HDMI compatible
Answer:	No, doesn’t have an hdmi port. But it does have an optical input and comes with the cable
Question:	Does it have hdmi arc support
Answer:	You want optical. It gives you a crisper sound than HDMI could ever produce.

Product features

Louder, Better TV Sound

With 3 total speakers, the VIZIO 2.1 Sound Bar delivers outstanding audio performance with up to 100dB of sound.

Powerful Bass

The wireless subwoofer adds booming bass to sports, TV shows, movies, and music down to 50Hz.

Multi-Dimensional Sound

With DTS Virtual:X sound enhancement, you’ll experience room-filling, floor-to-ceiling multi-dimensional sound with its immersive effects, like jets flying overhead and rain falling from above.

Product description

Nothing brings realism to recorded sound like deep, authoritative bass. Yet, most affordable systems are compromised in this critical region. For the sub1010, the rich, powerful bottom octaves are fundamental—literally—to the life of music and movie soundtracks when it comes to reproducing the full spectrum of instruments and sound effects.

• Enclosure Type: bass reflex
• Amplifier Type: Class AB
• Amplifier power: 120 watts peak/ 60 watts RMS
• Frequency response: 38hz-200hz; crossover frequency: 40hz-200hz
• Driver: 10" Low Throw dynamic woofer with these inputs: L/R/LFE/speaker level

User questions & answers

Question:	Why did the price go back up to $129. ? I was going to purchase it at $99. , I wont pay
Answer:	There are fairly clear instruction included with the unit. If you have a receiver with subwoofer out, just run an RCA cable to the single input on the subwoofer. If you are using just a stereo amplifier, then you'll need to do some additional wiring. Again, the instructions should be clear enough, but basically, wire from the amp outs to the subwoofer and then from your subwoofer to your speakers, and then set the crossover frequency using the subwoofer dial.
Question:	This subwoofer has hi level ins but no hi level outs in the pictures. How does that work? Run 2 sets of wire from amp? 1 set to sub 1 set to speakers
Answer:	Yes it is powered. 400 watts, is plenty of power. Excellent sound. Keep it away from the wall a foot or so so it can breathe.
Question:	Does unit have a lfe connection? i don’t see one from the pics
Answer:	I adjust as needed, depending on the source. Normally people set it in the middle and use the source (receiver, etc) for adjustment, but my new receiver requires the TV to be on to adjust sound output
Question:	Hi ,My question is how do i set up my subwoofer
Answer:	Hi,I know it's been almost a year since you purchased the sub. Don't use any petroleum based product on the rubber surround. It will dry out the rubber. Btw, the rubber will hold up for many years and even longer if you keep sunlight off of it. It being a sub the grill won't harm the sound the way a grill can slightly harm on your main speakers. Steve