Product description

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP444 is perfect for bringing your studio equipment's phono-level output to a more suitable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it's a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP444 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP444 Preamplifier. Features: Converts Phono Signals to Line Level Signals State-of-the-Art Circuitry Accommodates Magnetic Pickups Ultra-Low Noise Operation Improves Sound Performance Connects to Turntables and Other Studio Equipment Input Sensitivity: 3mV at 50K Ohms (Phono) Dedicated RCA and 1/4" Output Connectors Output: 2V max (P-P) at 10K Ohms DC 12-Volt Power Adapter Included Frequency Response: 20 Hz ~ 20 KHz ±2dB S/N Ratio (A-WTD): 70 dB - Output Level: 2V THD: 0.08% @ 1KHz and 3mV Input | S/N Ratio: 70dB Input Sensitivity/Impedance/Phono 3 mV/50K Ohms Load Impedance: 10K Ohms - Reference Voltage: 1V d Dimensions (W x H x D): 3.54" x 2.13" x 1.02" Sold as: Unit Weight: 0.85 lbs.

From the Manufacturer

&

	PP444	PP555	PP999	PHE300	PHE400
	Turntable / Phono Pre-Amplifiers			Noise / Hum Eliminators
Jacks	RCA & 1/4''	RCA & 1/4''	RCA	1/4'' TRS	1/4'' TRS & XLR
12V DC Adaptor	✔	✔	✔

• CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms
• LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers The output is 2V max (P-P) at 10K Ohms It’s better to position the preamp close to the source to reduce unwanted noise and interference
• CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music For the receiver, this can be connected to speakers, computers, laptops and more
• SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA outputs
• 1 YEAR WARRANTY: We guarantee this electric phono preamplifier with both a 30 day no hassle money back return policy and a 1 year manufacturer’s guarantee

User questions & answers

Question:	Does this thing have an/off switch or do you need to plug/unplug everytime you use it
Answer:	no switch. You can plug/unplug, I leave it plugged in all the time.
Question:	Unit works fine for awhile and then starts outputting static, even with no input connected. I've tried it with several amps with the same results
Answer:	Most likely people who are having noise problems it is because of ground loop isolation problem. If you have a ground loop isolation problem grounding the preamp box is unlikely to help. Without getting technical, what you want to buy is a ground loop isolator or a humm eliminator; both the ground loop isolator and humm eliminator tackles the cause of the noise at the fundamental source of the problem, depending on your audio setup, one maybe easier to use than the other. To use the ground loop isolator or the humm eliminator they generally come with instructions, or you can google this topic. If the noise in your audio system isn't fixed by using this solution the first time, try putting the ground loop isolator and humm eliminator at various points in your audio system. Also you can talk to audio people and get advice about how to fix ground loop problems from people who setup big audio systems, for concerts and such; if you talk to the average electronic garage shop audio enthusiast you are likely to get bad advice, i.e., meaningless explanations. Also caution must be used when Googling this topic, much of the discussion, advice and explanation on this topic is bogus, you can get a general correct feel of this topic if you read a number of explanations. Also one more thing that can cause a "popping noise" is that you have too much gain, this is a phono amp and the gain is huge, it takes a 3mV and makes it 2Vp-p this is a gain of around 100 to 200, if you gain up the audio signal too much then the signal out of your amplifier runs out of head room and clips, this can cause a popping sound, essentially you have too much gain. If this is occurring you need to either buy a preamp with less gain or attenuate the signal before it gets to the preamp. If this is a problem, too much gain, you can buy preamps with gain control.
Question:	My turntable has very quiet output. Will this device help boost the volume
Answer:	Yes, indeed. If your need was like mine (no built-in pre-amp on the turntable and no specifically dedicated phono input on your amplifier) you will find this unit to be the perfect solution to needed amplification of the turntable's output. Don't forget to hook up the ground wire as directed or you may wind up putting unwanted noise into the audio.
Question:	My amp DOES have a Phono Input, but my cartridges are low output. Can I use this to boost the signal using the Phono Input to reduce audible hiss
Answer:	No, you can't. This is a phono preamp with RIAA playback equalization that amplifies the signal about 100 times, so it essentially does what your built-in phono preamp does. The output signal from the separate preamp is equalized to a nominally "flat" frequency response and the amplified signal level will overload and probably damage your built-in phono preamp. Plug it into any other stereo line input on your system (AUX, CD, DVD, TAPE, VCR, etc.), but NOT the PHONO input! If you need higher signal gain, maybe look at phono preamps from ART or TCC that have output level controls. If you use moving-coil (MC) cartridges, you need a preamp specifically designed for them...they require at least 55 dB (over 500 times) signal gain vs. about 40 dB (100 times) for moving-magnet (MM) cartridges. Noise becomes a critical issue with MC cartridges because of their extremely low signal output, so good-quality cables and good turntable grounding are essential.

Product features

Pyle Phono Turntable Preamp Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter

• Converts Phono Signals to Line Level Signals
• State-of-the-Art Circuitry Accommodates Magnetic Pickups
• Ultra-Low Noise Operation Improves Sound Performance
• Connects to Turntables and Other Studio Equipment
• Input Sensitivity: 3mV at 50K Ohms (Phono)
• Dedicated RCA and 1/4'' Output Connectors
• Output: 2V max (P-P) at 10K Ohms

• DC 12-Volt Power Adapter Included
• Frequency Response: 20 Hz ~ 20 KHz ±2dB
• S/N Ratio (A-WTD): 70 dB - Output Level: 2V
• Input Sensitivity/Impedance/Phono 3 mV / 50K Ohms
• Load Impedance: 10K Ohms - Reference Voltage: 1V d
• Dimensions (W x H x D): 3.54" x 2.13" x 1.02"

Product description

Two years in the making, Pangea Audio's Premier SE ground-breaking turntable cable – or, more accurately, turntable cable with superior grounding – has finally arrived. This amazing RCA-to-RCA cable was definitely worth the wait! What distinguishes the Premier SE from lesser turntable cables? For that we need a little background. For nearly fifty years, all turntables came with a dedicated cable running straight from the tonearm base to the phono stage. In the last ten years, however, more and more popular selling turntables – such as the Pro-Ject Debut Carbon, for example – have been designed with RCA outputs on the back of the turntable. This welcome design change allows users to choose whichever audio interconnect cable they wanted, but the benefits come with a big problem. For best sound, there should be a separate ground wire running from the turntable back to the preamp. But 99.99% of the quality audio cables on the market lack this necessary grounding wire. Several companies introduced interconnects with a separate ground wire, but these grounding cables were not integrated into the cable. Instead, they were fixed outside of the cable, resulting in a less than idea grounding solution.

• RCA-to-RCA turntable cable
• Delivers exceptionally low noise performance with any high-end audio turntable
• Unique twin-lead design
• Cardas Grade One Copper conductors
• Black/gray nylon-covered TPR jacket

User questions & answers

Question:	How long is it
Answer:	Soft TPU Clear case,thank you
Question:	Is the little cable connector thing (that holds the 3 cables together)-- adjustable? or is it fixed where it is
Answer:	Kind of. It has a ridge around the edge that semi-protects your screen. However, it provides no real screen protection and so I would highly recommend buying a separate screen protector. It is worth noting that this product also discolors quickly, which is mostly a cosmetic issue but is something to note nonetheless.

Product description

High performance audio cable designed specifically for use with turntables. OFC wire with 100% spiral shield delivers superior signal transfer and low noise level. Cables are hand terminated with high content silver solder. In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire extends 6" at each end of the cable to ensure an easy connection to a chassis ground screw. Durable and supple outer PVC jacket allows for easy cable connection and long cable life. This version has left and right RCA plugs at one end and bare ends at the other end, making it ideal for upgrading the cables on vintage turntables. Ground lugs at each end of course. FYI - Turntables use a magnetic cartridge and stylus to pick up the sound from the record groove. The signal level from the magnetic cartridge is very low and must be connected to audio equipment with a "PHONO" level input. When connecting a turntable to audio equipment without a phono input, an AMERICAN RECORDER VDC-141 PHONO PREAMP can be used, allowing connection to any line level input (CD, DVD, TAPE, etc.).

• RCA to Bear end
• Ground Wire with Fork connector
• 100% Spiral Shield
• High content silver solder

Product description

High performance audio cable designed specifically for use with turntables. OFC wire with 100% spiral shield delivers superior signal transfer and low noise level. Cables are hand terminated with high content silver solder. In addition, there is an 18 awg chassis ground wire with fork connector. The ground wire extends 6" at each end of the cable to ensure an easy connection to a chassis ground screw. Durable and supple outer PVC jacket allows for easy cable connection and long cable life. This version has left and right RCA plugs at both ends as well as a ground lug connection CABLE LENGTHS 1 meter (3.3 ft) 1.5 meter (4.95 ft) 2 meter (6.6 ft) 3 meter (9.9 ft) 4 meter (13.2 ft) FYI - Turntables use a magnetic cartridge and stylus to pick up the sound from the record groove. The signal level from the magnetic cartridge is very low and must be connected to audio equipment with a "PHONO" level input. When connecting a turntable to audio equipment without a phono input, an AMERICAN RECORDER VDC-141 PHONO PREAMP can be used, allowing connection to any line level input (CD, DVD, TAPE, etc.).

• RCA to RCA Connectors
• Ground Wire with Fork connector
• 100% Spiral Shield
• High content silver solder

• ⭐️Bi-Directional RCA to 3.5mm Cable: Oldboytech RCA to AUX delivers music between devices of Red and Black interfaces and Auxiliary interface, such as cell phone to speakers/car stereo radio, smart TV to headphones/ home Hi-Fi system, laptop to amplifier/turntable, DJ controller to mixer.
• ⭐️Unparalleled Stereo Sound: Our professional RCA Cable offers a remarkable stereo sound experience to you. Oldboytech RCA to 3.5mm combines enameled copper conductors, aluminum alloy casings, 24K gold-plated connectors with double shieldings(TPE jacket plus nylon braid) to protect the audio signal against RF, EM and ground loop interference during transmission and provide noise-free and ultra-clear sound quality.
• ⭐️Enhanced Durability: Manufactured by evolved braided nylon, Oldboytech Nylon Braided Headphone Aux to Stereo RCA Audio Lead passes 10000+ bend tests and can withstand any twist, tug, and tangle. Gold plated connectors and aluminum alloy casings resist corrosion and ensure optimum sound quality. The extended wire joint design protects the 2 RCA Jack Audio Cable from bending.
• ⭐️Broad Compatibility: The RCA to 3.5mm Aux Jack Cable works well with devices of 2RCA or Auxiliary interface, like smart TV, turntable, speaker, AV receiver, amplifier, mixer, DJ controller, home Hi-Fi system, car radio, MacBook, iPod, Pad, iPhone, laptop, desktop, headphones, earphones, Mp3/Mp4 player, DAC, soundbar, smartphones.
• ⭐️What You Get: 2 Pack Oldboytech RCA to 3.5mm - 6 Feet. Each cable is tested to ensure it works before being send off and have American based customer support.

User questions & answers

Question:	Can i use this cable to connect both a samsung tv sound bar and alexa to a single aux connection on the bose wave music system iv
Answer:	If there is no rca port, you need to purchase an rca port to connect. You can see if your product has a 3.5mm jack
Question:	Will this work on alexa to my stereo receiver
Answer:	We do not have a fitment for that year, make and model. You can email the dimensions of the dash opening, along with a photo and we can try and find a potential fitment.
Question:	Does this work with alexa
Answer:	You can almost make it fit anything, but YES, it should fit in a 73 Duster.
Question:	Will this plug into an iPhone
Answer:	It fits in my 78 Chevy c10. It will fit. The advice I have is measure what the old stereo knobs are at, and then adjust the new stereo to match it. I tossed the old one out and had to take the dash apart 15 times to get it right.

Product features

3.5mm Headphone Mini Jack to 2RCA Stereo Audio Cable

• 3.5mm Stereo Aux Jack to 2 RCA Phono cable enables you to connect an iPhone/iPad, MP3 player, TV, Car Radio, MacBook, smartphone or laptop with the 3.5mm aux Jack to Stereo Receiver, Amplifier, Speaker, Turntable, AV receiver with 2 RCA (Red/White).
• The Stereo Headphone Jack to 2RCA Phono Cable is bi-directional. It can deliver audio from 3.5mm devices to 2RCA audio outputs. Or on the contrary.
• 3.5mm Mini Jack to RCA Phono Cable is Combination of gold-plated connectors, bare copper conductors, dual-shielding, high-quality polished metal connectors and ferrite bead shielding provides superior stereo audio transmission and protection against radio frequency interference (RFI) and electromagnetic interference (EMI)

Universal Compatibility

The 3.5mm aux male connector is intended for

• iPod, iPad, tablets, laptops, MacBook Pro, Mac Air, Notebook, computer, MP3 players, Walkman, Discman and all other audio-playing
• Headphone, Hi-Fi stereo sound systems, car stereos, radios, portable Bluetooth speakers and wireless audio receivers
• Smartphones (IOS and Android) , Samsung, HTC, Motorola, Nexus, Nokia, LG, Blackberry or other 3.5mm-enabled devices.

The 2 male RCA Phono connectors are meant for

• Stereo receivers or speakers, turntable, VCR, DVD player, TV, Video Camera, AV receiver, amplifier, projector, radio
• Subwoofer, PS3, Wii, HDTV, Dolby Digital Receiver, DTS Decoder, Mini Disk, TV, Video Camera, VCR, or other equipment with legacy RCA connectors.patibility and correct operation of all connected equipment before the cable is permanently installed inside a permanent fixture.

Nylon-braided Cable

Manufactured by evolved braided nylon, Oldboytech RCA cable passes 10000+ bend tests and can withstand any twist, tug, and tangle.

Gold-plated Connector

The Oldboytech RCA cables feature professional quality 24k gold plated connectors which protect the cables from corrosion and ensure a premium connection.

Friendly Ladder Design

The extended slim wire joint design protects the cable from bending and can perfectly match your smartphone, headphone and any other devices. No need to take off the phone case when using.

Product description

This cable is designed to connect a turntable to an amplifier, DJ mixer, or phono preamp. It is ideal for use with all turntables requiring a ground wire.

• Nickel-plated plugs for rugged durability and efficient signal transfer
• Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
• OFC spiral shields for effective EMI and RFI rejection and flexibility
• Connectors: Dual RCA to Same with Ground Wire

Product features

Hosa CRA-203DJ

This cable is designed to connect a turntable to an amplifier, DJ mixer, or phono preamp. It is ideal for use with all turntables requiring a ground wire.

Promise of Quality

We are committed to providing high quality products that meet or exceed our customers’ expectations through unparalleled value, customer service, and continual improvement of our business processes.

Mission

At Hosa, we are passionate about providing solutions to fulfill our customers’ needs through excellent service and superior value.

History

Founded in 1984, Hosa Technology established itself by bringing to the industry something it sorely needed: Adaptors, many adaptors. As we turn to the future, Hosa stands firm on the promise to serve you, the customer.

About Hosa Technology

Headquartered in Buena Park, CA, Hosa Technology, Inc. is one of the leading suppliers of analog and digital connectivity solutions to the musical instrument and professional audio industries. Since the company’s inception in 1984, Hosa Technology’s consumer-driven inventory has expanded to include a full line of audio, video, and computer products. Enthusiasts and professionals alike rely upon Hosa Technology to deliver world-class performance and value both on the stage and in the studio.

Product description

Byron Statics Bluetooth Speakers 5 0 Record Player Audio Turntables Vinyl Player Suitcase 3-Speed Wireless 2 Built-in Stereo Speakers RCA Output Headphone 3 5 Jack Line In Replacement Needle Black

• Advanced 5.0 bluetooth technology, Byron Statics record player have a stronger connection and longer distance fast and stable transmission without tangling bluetooth mode works seamlessly HD lossless Hi-Fi delity.
• The briefcase design makes the little record player great for moving around the house or traveling places with it the lid is lined with velvet wooden stereo speaker cabinet It comes with a back-up replacement needle.
• Byron Statics turntable works out of the box take off the protective piece over the stylus moves the tone arm over the record and slowly drops it into place make sure your records are dust free.
• The simple interface On/Off is also the volume knob turntable line in bluetooth mode selector knob have connected nicer speakers via the RCA jacks on the back or headphone outputs get better sound with more bass.
• Byron Statics vinyl record player allows to play LP's in 33/45/78 RPMs play 7" 10" 12" size record it will automatically stop playing once it reaches the end of a record don't need to worry about wear and tear vinyls
• Any questions please contact our customer support team, we will try our best to resolve the problems for you, you can find after-sell email address on instruction.

User questions & answers

Question:	Even on the slowest speed, it’s too fast for 12”. Why
Answer:	You guys didn't send me the ring and the earrings
Question:	Mine is not spinning. i turned it on, i adjusted the speed setting. is there something that i am not doing to get it to spin in order to play
Answer:	Long. Nearly to navel.
Question:	Do I need to purchase speakers for this or does it have them built in
Answer:	Due to quarantine I've not been able to obtain my device
Question:	I did not receive a cord with my product. How does it play
Answer:	I don't believe so.

Product features

Easy To Use

Worked out of the box, and have portable plug-and-play system.

Fully automatic operation with three speeds: 33 1/3, 45, 78 RPM.

On-The-Go Ease

Always ready to go, the durable case and easy carry handle make taking Byron Statics briefcase turntable to your next destination a breeze.

Listen Your Way

Easily play your favorite audio from a vinyl record, bluetooth, or 3.5mm Aux-in via built-in stereo speakers.

Get better sounds through RCA cable, also features a headphone jack for private listening.

Wireless Bluetooth

Latest bluetooth technology enable you to wirelessly stream your favorite music to the player.

This device only support Bluetooth input, not output.

Vibration Minimized

Metal tone arm, smooth turntable and replaceable diamond stylus for improved tracking and reduced resonance, Byron Statics brings you flawless listening experience with your records.

Compatible with all your records

This player is compatible with 3 Speeds (33-1/3, 45 and 78 RPM) and 3 sizes of record (7'', 10'' and 12'').

Enjoy retro-style music by vinyl records with your family.

• 3-speed Belt-driven Recrd Player----Supports 33-1/3 RPM, 45RPM, 78RPM playing speed, let you enjoy all of your vinyl records.
• Fantastic Bluetooth Turntable----Winelessly connect to your bluetooth enabled device to enjoy your favorite digital music.
• Built-in Stereo Speaker----This record player is built-in stereo speaker, you can use it to play your favorite music. The high-sensitivity stylus can read the record information accurately.
• 3.5mm Aux-in & RCA Output----3.5mm jack for playing music from other audio deivces. RCA jacks allow you connect other amplifier or stereo system to get a better listening experience.(includes cables)
• Vintage Designed----Natural wood designed with removable protective dust cover and easy-to-control multiple connections panel. It can bring you music enjoyment but also decorate your room to create a pleasant and relaxing surrounding feel!

User questions & answers

Question:	Does the arm retract after playing
Answer:	No...it does have auto shut off but arm remains on record
Question:	Is it very heavy
Answer:	Not at all!
Question:	Does it automatically stop at the end
Answer:	Yes; there is a switch to enable Auto-Stop. But this isn't automatic, so you'll still need to put the tonearm back once the record stops.
Question:	Does this have to be plugged into computer to work
Answer:	It doesn't need to be plugged into the computer. It works independently.

• 🎶【All-in-one Record Player】3 speed record player turntable support all 7", 10" & 12" vinyl records, with built-in speakers and high-sensitivity cartridge to reappear smooth and retrospective sound of your vinyls.
• 📻【Wireless Bluetooth & FM Radio】Streaming songs wirelessly from your phones/tablets to the record player via Bluetooth receiver, and enjoying listening to stories and songs on the TF card/USB disk mode or the latest news via FM radio(87.5 to 108 MHz).
• 🔊【Clear Sound & USB Output】Built-in 2*5W stereo speakers and can be powered by portable DC 5V/1A power source for on-the-road trips. RCA output jack for connecting external speakers(built-in preamp), also you can play mp3 audio on U-disk directly or recording to digital from vinyl records. (Notice: Vinyl Recording Only Support USB Disk in FAT32 format).
• 🎻【Auto-Stop & Dust Cover】The 3-speed turntable of Bluetooth vinyl player stops automatically after fully playing a record, no record scratched worries as from non-stop turntables. Full removable dust cover shield your vinyl record and turntable to keep clean and away from dust and moisture.
• 🎁【Vintage Look, Ideal Gift】9-in-1 functions for meeting various needs, easy to set up, with simple buttons and LED panel to operate, retro style, superior quality and vintage brushed surface, making this vinyl record player a perfect gift for your beloved friends and family. We offer 12 months worry-free warranty & 24 hours customer service.

Product features

Streaming Music Wirelessly

Turn on Bluetooth of your devices and find "TE-2017" on the device list, then hit connect.

Built-in 2x5W Stereo Speakers

No extra auxiliary devices are required, just put on your vinyls and play, beginner-friendly for any age.

Vinyl to Digital Recording

Recording vinyls and save it digitally to USB flash drive, or playback music on your U-disk.

• Recording in USB FAT32 format only
• Playback support FAT32 or exFAT
• USB in NTFS format Is not supported

Premium Stylus Needle

The needle pressure is about 5-6 grams, enables to play vinyls smoothly and no scratches.

Sleek Design for Home Decor

Brushed surface and vintage style make it a great decor for any room and show your unique taste of aesthetics.

3 Speed Turntable: 33, 45, 78 RPM

3-speed turntable plays vinyl records in 7"/10"/12", great for any LP vinyl lovers and collectors.

Built-in Pre-amplifier, Connecting to Powered External Speakers

• This turntable have an internal preamp and RCA output ( RCA cable not included ) which will allow to connect directly to powered speakers.

1. Find a RCA cable(red and white male) to 3.5 mm mini-plug (male) adapter cable.
2. Connect the RCA cable (red and white male) plugs to the turntable' RCA output( female), making sure to match red to red and white to white.
3. Connect the RCA cable's 3.5 mm mini-plug to the powered speakers' Line Level input.

Questions & Answers

Q1: Can I connect this turntable to my Bluetooth speaker?

A: No, this item is not designed to connect to Bluetooth speakers, it can only receive signal, which means it can be connected with smart phones, tablets and other Bluetooth input devices. Also you can connect it to your computer's sound card using an RCA to 3.5 mm stereo male to male cord.

Q2: Can I connect this record player to external speakers?

A: This turntable has two built in 5W stereo speakers and a built-in pre-amp. You can connect it directly to your powered speaker system.

Q3: Tonearm shakes a lot while turntable spinning.

A: Please re-adjust the tonearm and make sure it is neutrally balanced and your vinyls not seriously wrapped.

Tips:

Please contact our team for a solution If you receive a defective product or the product gets broken in 365 days after purchase.

• Traditional Style, Solid Wood Appearance & Dust Cover
• Three-speed Turntable, works with 33 1/3, 45, and 78 RPM records
• 3.5mm aux-in and headphone jack for playing music from your smart phones, Tablet, PC, MP3, CD Player
• RCA outputs for connection to HiFi systems
• All-in-one record player with built-in stereo speakers

User questions & answers

Question:	Does it close while playing
Answer:	Yes, it does.
Question:	Does this come with any kind of warranty
Answer:	110 volts
Question:	How many needles does it come with
Answer:	It’s sort of a warmer walnut color. Like Brazilian cherry wood.
Question:	Is there a warrantee with this? Mine is less than a year old and the speakers won’t produce sound even though the needle is generating the music
Answer:	Yes it has a power cord. It is not battery powered.

Product features

Wrcibo Vintage 3-Speed Belt Drive Turntable

Best Gifts for audiophiles, vinyl collectors and music lovers alike.

Bring romantic old days back!

Features

Belt-drive & semi-automatic play tone pickup arm

Ceramic stereo cartridge with sapphire stylus

Comes with 2 Built-in Speakers



What's in the Box:



1 x Turntable player

1 x 45rmp single Puck adapter

1 x USB power adapter

1 x USB charging cable

1 x User Manual

Audio Input & Output

Input:

1. Vinyls
2. Phones or other players to play music via 3.5mm AUX-IN jack

Output:

1. Stereo System via RCA outputs
2. Headphones/ Earphones via 3.5mm headphone jack

Function Switches & Jack

 

Detachable Dust Cover

High-density MDF Chassis

Product description

PylePro Model : PP999

Compact Ultra-Low Noise Phono Turntable

Compact Ultra-Low Noise Phono Turntable Preamp with 12-Volt Adaptor - Preamplifier

Converts Phono Signals to Line Level Signals

12-Volt DC 110V Adaptor Included

Dedicated RCA Connectors

Output Level: 2V

Reference Voltage: 1V

Load Impedance: 10K Ohms

S/N Ratio (with A-WTD): 70 dB

T.H.D. : 0.08 for 1 KHz 3 mV Input

Frequency Response:20 Hz ~ 20 KHz ±2dB

Input Sensitivity / Impedance / Phono - 3 mV / 50K Ohms

Dimensions (W x H x D):3.54'' x 2.13'' x 1.02''

Weight : 0.88 Lbs

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP999 is perfect for bringing your studio equipment's phono-level output to a more suitable and manageable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP999 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP999 Preamplifier.

From the Manufacturer

&

	PP444	PP555	PP999	PHE300	PHE400
	Turntable / Phono Pre-Amplifiers			Noise / Hum Eliminators
Jacks	RCA & 1/4''	RCA & 1/4''	RCA	1/4'' TRS	1/4'' TRS & XLR
12V DC Adaptor	✔	✔	✔

• CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms
• LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference
• CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more
• SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs

User questions & answers

Question:	If I have a record player without a Preamp, will this help me with hooking it up to a Sonos
Answer:	You can hook it up to anything with a red and white connection. Or if you get the rca to 3.5mm jack then you can hook it up to anything with an input slot. I used this on my realistic lab 440 which doesn't have a preamp. Once I connected the ground from my turntable into the ground slot on this amp, my music sounded loud and clear.
Question:	mp
Answer:	Turntables (with typical magnetic cartridges) have very low signal output (a few thousandths of a volt). Records have the bass reduced to provide enough room on the surface for the recorded grooves, and the treble boosted to reduce the surface noise level when played back. A phono preamplifier performs two jobs: - It boosts the small signal from the turntable by about 50 to 100 times (producing a "line level" signal) so it can be used by typical receivers or amplifiers.- It also boosts the bass and reduces the treble according to an industry standard (the RIAA equalization curve) to restore the signal from the record to its original frequency response.The Pyle PP999 is just an inexpensive phono preamp, nothing special. Phono preamps can range from $20 on up to whatever you're willing to pay for ultra-high quality. Some manufacturers make "USB" phono preamps that have A/D (analog-to-digital) converters built in and connect to a computer's USB port. Most of these provide "CD quality" conversion (16-bits at 44kHz or 48kHz). These may be adequate for digitizing your vinyl, but many computer sound systems can provide up to 24-bit, 192 kHz conversion depending on the software you use (much higher quality), by connecting the preamp output to the computer's line input. Don't just convert directly to MP3 files...you'll lose too much detail compared to the original vinyl sound. It takes almost no time to make an MP3 copy of a high bit-rate WAV or FLAC (lossless) file, but it'll take you an hour to make ANY digital copy of an LP, so do it the best you can the first time!
Question:	So this is a stupid question, I plug my RCA wires coming from my turntable into the Amp. But where do I plug the speaker wires into on the Amp
Answer:	TurnTable==>PreAmp==>Receiver/Amplifier==>SpeakersThe 'Pyle PP999' is the "Preamp". The Turntable is plugged into the PP999 INPUT and the PP999 OUTPUT plugs directly into any (non Phono) INPUT on the receiver. Your Receiver allows you to switch between different music-sources, contains the primary-amplifier and distributes the final sound out to the speakers(and subwoofer). The Receiver should have multiple inputs for receiving signals from eg. CD, Tape, VCR, etc. In my experience those labels are for convenience and interchangeable with the exception of a "Phono" input. NOTE: If the receiver has a "Phono" input then there's a built-in preamp. If your using an external preamp (Pyle PP999) do NOT plug it into the Receiver's 'Phono' input, it could cause damage. I plug the preamp for the turntable into the Receiver's 'VCR' or 'TV' inputs.
Question:	I have the Pyle turntable and Pyle stereo but they don't work together--VERY low sound--so is this the missing piece
Answer:	Turntables (with typical magnetic cartridges) have very low signal output (a few thousandths of a volt). Records have the bass reduced to provide enough room on the surface for the recorded grooves, and the treble boosted to reduce the surface noise level when played back. Most modern receivers DO NOT have the right inputs to deal with this signal (no "phono" input). A phono preamplifier performs two jobs: - It boosts the small signal from the turntable by about 50 to 100 times (producing a "line level" signal) so it can be used by typical receivers or amplifiers.- It also boosts the bass and reduces the treble according to an industry standard (the RIAA equalization curve) to restore the signal from the record to its original frequency response.The Pyle PP999 is just an inexpensive phono preamp, nothing special. Phono preamps can range from $20 on up to whatever you're willing to pay for ultra-high quality. Some manufacturers make "USB" phono preamps that have A/D (analog-to-digital) converters built in and connect to a computer's USB port. Most of these provide "CD quality" conversion (16-bits at 44kHz or 48kHz). These may be adequate for digitizing your vinyl, but many computer sound systems can provide up to 24-bit, 192 kHz conversion depending on the software you use (much higher quality), by connecting the preamp output to the computer's line input. Don't just convert directly to MP3 files...you'll lose too much detail compared to the original vinyl sound. It takes almost no time to make an MP3 copy of a WAV or FLAC (lossless) file, but it'll take you an hour to make ANY digital copy of an LP, so do it the best you can the first time!