Product description

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP444 is perfect for bringing your studio equipment's phono-level output to a more suitable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it's a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP444 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP444 Preamplifier. Features: Converts Phono Signals to Line Level Signals State-of-the-Art Circuitry Accommodates Magnetic Pickups Ultra-Low Noise Operation Improves Sound Performance Connects to Turntables and Other Studio Equipment Input Sensitivity: 3mV at 50K Ohms (Phono) Dedicated RCA and 1/4" Output Connectors Output: 2V max (P-P) at 10K Ohms DC 12-Volt Power Adapter Included Frequency Response: 20 Hz ~ 20 KHz ±2dB S/N Ratio (A-WTD): 70 dB - Output Level: 2V THD: 0.08% @ 1KHz and 3mV Input | S/N Ratio: 70dB Input Sensitivity/Impedance/Phono 3 mV/50K Ohms Load Impedance: 10K Ohms - Reference Voltage: 1V d Dimensions (W x H x D): 3.54" x 2.13" x 1.02" Sold as: Unit Weight: 0.85 lbs.

From the Manufacturer

&

	PP444	PP555	PP999	PHE300	PHE400
	Turntable / Phono Pre-Amplifiers			Noise / Hum Eliminators
Jacks	RCA & 1/4''	RCA & 1/4''	RCA	1/4'' TRS	1/4'' TRS & XLR
12V DC Adaptor	✔	✔	✔

• CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms
• LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers The output is 2V max (P-P) at 10K Ohms It’s better to position the preamp close to the source to reduce unwanted noise and interference
• CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music For the receiver, this can be connected to speakers, computers, laptops and more
• SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA outputs
• 1 YEAR WARRANTY: We guarantee this electric phono preamplifier with both a 30 day no hassle money back return policy and a 1 year manufacturer’s guarantee

User questions & answers

Question:	Does this thing have an/off switch or do you need to plug/unplug everytime you use it
Answer:	no switch. You can plug/unplug, I leave it plugged in all the time.
Question:	Unit works fine for awhile and then starts outputting static, even with no input connected. I've tried it with several amps with the same results
Answer:	Most likely people who are having noise problems it is because of ground loop isolation problem. If you have a ground loop isolation problem grounding the preamp box is unlikely to help. Without getting technical, what you want to buy is a ground loop isolator or a humm eliminator; both the ground loop isolator and humm eliminator tackles the cause of the noise at the fundamental source of the problem, depending on your audio setup, one maybe easier to use than the other. To use the ground loop isolator or the humm eliminator they generally come with instructions, or you can google this topic. If the noise in your audio system isn't fixed by using this solution the first time, try putting the ground loop isolator and humm eliminator at various points in your audio system. Also you can talk to audio people and get advice about how to fix ground loop problems from people who setup big audio systems, for concerts and such; if you talk to the average electronic garage shop audio enthusiast you are likely to get bad advice, i.e., meaningless explanations. Also caution must be used when Googling this topic, much of the discussion, advice and explanation on this topic is bogus, you can get a general correct feel of this topic if you read a number of explanations. Also one more thing that can cause a "popping noise" is that you have too much gain, this is a phono amp and the gain is huge, it takes a 3mV and makes it 2Vp-p this is a gain of around 100 to 200, if you gain up the audio signal too much then the signal out of your amplifier runs out of head room and clips, this can cause a popping sound, essentially you have too much gain. If this is occurring you need to either buy a preamp with less gain or attenuate the signal before it gets to the preamp. If this is a problem, too much gain, you can buy preamps with gain control.
Question:	My turntable has very quiet output. Will this device help boost the volume
Answer:	Yes, indeed. If your need was like mine (no built-in pre-amp on the turntable and no specifically dedicated phono input on your amplifier) you will find this unit to be the perfect solution to needed amplification of the turntable's output. Don't forget to hook up the ground wire as directed or you may wind up putting unwanted noise into the audio.
Question:	My amp DOES have a Phono Input, but my cartridges are low output. Can I use this to boost the signal using the Phono Input to reduce audible hiss
Answer:	No, you can't. This is a phono preamp with RIAA playback equalization that amplifies the signal about 100 times, so it essentially does what your built-in phono preamp does. The output signal from the separate preamp is equalized to a nominally "flat" frequency response and the amplified signal level will overload and probably damage your built-in phono preamp. Plug it into any other stereo line input on your system (AUX, CD, DVD, TAPE, VCR, etc.), but NOT the PHONO input! If you need higher signal gain, maybe look at phono preamps from ART or TCC that have output level controls. If you use moving-coil (MC) cartridges, you need a preamp specifically designed for them...they require at least 55 dB (over 500 times) signal gain vs. about 40 dB (100 times) for moving-magnet (MM) cartridges. Noise becomes a critical issue with MC cartridges because of their extremely low signal output, so good-quality cables and good turntable grounding are essential.

Product features

Pyle Phono Turntable Preamp Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA Output & Low Noise Operation Powered by 12 Volt DC Adapter

• Converts Phono Signals to Line Level Signals
• State-of-the-Art Circuitry Accommodates Magnetic Pickups
• Ultra-Low Noise Operation Improves Sound Performance
• Connects to Turntables and Other Studio Equipment
• Input Sensitivity: 3mV at 50K Ohms (Phono)
• Dedicated RCA and 1/4'' Output Connectors
• Output: 2V max (P-P) at 10K Ohms

• DC 12-Volt Power Adapter Included
• Frequency Response: 20 Hz ~ 20 KHz ±2dB
• S/N Ratio (A-WTD): 70 dB - Output Level: 2V
• Input Sensitivity/Impedance/Phono 3 mV / 50K Ohms
• Load Impedance: 10K Ohms - Reference Voltage: 1V d
• Dimensions (W x H x D): 3.54" x 2.13" x 1.02"

Product description

PylePro Model : PP999

Compact Ultra-Low Noise Phono Turntable

Compact Ultra-Low Noise Phono Turntable Preamp with 12-Volt Adaptor - Preamplifier

Converts Phono Signals to Line Level Signals

12-Volt DC 110V Adaptor Included

Dedicated RCA Connectors

Output Level: 2V

Reference Voltage: 1V

Load Impedance: 10K Ohms

S/N Ratio (with A-WTD): 70 dB

T.H.D. : 0.08 for 1 KHz 3 mV Input

Frequency Response:20 Hz ~ 20 KHz ±2dB

Input Sensitivity / Impedance / Phono - 3 mV / 50K Ohms

Dimensions (W x H x D):3.54'' x 2.13'' x 1.02''

Weight : 0.88 Lbs

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP999 is perfect for bringing your studio equipment's phono-level output to a more suitable and manageable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP999 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP999 Preamplifier.

From the Manufacturer

&

	PP444	PP555	PP999	PHE300	PHE400
	Turntable / Phono Pre-Amplifiers			Noise / Hum Eliminators
Jacks	RCA & 1/4''	RCA & 1/4''	RCA	1/4'' TRS	1/4'' TRS & XLR
12V DC Adaptor	✔	✔	✔

• CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms
• LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference
• CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more
• SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs

User questions & answers

Question:	If I have a record player without a Preamp, will this help me with hooking it up to a Sonos
Answer:	You can hook it up to anything with a red and white connection. Or if you get the rca to 3.5mm jack then you can hook it up to anything with an input slot. I used this on my realistic lab 440 which doesn't have a preamp. Once I connected the ground from my turntable into the ground slot on this amp, my music sounded loud and clear.
Question:	mp
Answer:	Turntables (with typical magnetic cartridges) have very low signal output (a few thousandths of a volt). Records have the bass reduced to provide enough room on the surface for the recorded grooves, and the treble boosted to reduce the surface noise level when played back. A phono preamplifier performs two jobs: - It boosts the small signal from the turntable by about 50 to 100 times (producing a "line level" signal) so it can be used by typical receivers or amplifiers.- It also boosts the bass and reduces the treble according to an industry standard (the RIAA equalization curve) to restore the signal from the record to its original frequency response.The Pyle PP999 is just an inexpensive phono preamp, nothing special. Phono preamps can range from $20 on up to whatever you're willing to pay for ultra-high quality. Some manufacturers make "USB" phono preamps that have A/D (analog-to-digital) converters built in and connect to a computer's USB port. Most of these provide "CD quality" conversion (16-bits at 44kHz or 48kHz). These may be adequate for digitizing your vinyl, but many computer sound systems can provide up to 24-bit, 192 kHz conversion depending on the software you use (much higher quality), by connecting the preamp output to the computer's line input. Don't just convert directly to MP3 files...you'll lose too much detail compared to the original vinyl sound. It takes almost no time to make an MP3 copy of a high bit-rate WAV or FLAC (lossless) file, but it'll take you an hour to make ANY digital copy of an LP, so do it the best you can the first time!
Question:	So this is a stupid question, I plug my RCA wires coming from my turntable into the Amp. But where do I plug the speaker wires into on the Amp
Answer:	TurnTable==>PreAmp==>Receiver/Amplifier==>SpeakersThe 'Pyle PP999' is the "Preamp". The Turntable is plugged into the PP999 INPUT and the PP999 OUTPUT plugs directly into any (non Phono) INPUT on the receiver. Your Receiver allows you to switch between different music-sources, contains the primary-amplifier and distributes the final sound out to the speakers(and subwoofer). The Receiver should have multiple inputs for receiving signals from eg. CD, Tape, VCR, etc. In my experience those labels are for convenience and interchangeable with the exception of a "Phono" input. NOTE: If the receiver has a "Phono" input then there's a built-in preamp. If your using an external preamp (Pyle PP999) do NOT plug it into the Receiver's 'Phono' input, it could cause damage. I plug the preamp for the turntable into the Receiver's 'VCR' or 'TV' inputs.
Question:	I have the Pyle turntable and Pyle stereo but they don't work together--VERY low sound--so is this the missing piece
Answer:	Turntables (with typical magnetic cartridges) have very low signal output (a few thousandths of a volt). Records have the bass reduced to provide enough room on the surface for the recorded grooves, and the treble boosted to reduce the surface noise level when played back. Most modern receivers DO NOT have the right inputs to deal with this signal (no "phono" input). A phono preamplifier performs two jobs: - It boosts the small signal from the turntable by about 50 to 100 times (producing a "line level" signal) so it can be used by typical receivers or amplifiers.- It also boosts the bass and reduces the treble according to an industry standard (the RIAA equalization curve) to restore the signal from the record to its original frequency response.The Pyle PP999 is just an inexpensive phono preamp, nothing special. Phono preamps can range from $20 on up to whatever you're willing to pay for ultra-high quality. Some manufacturers make "USB" phono preamps that have A/D (analog-to-digital) converters built in and connect to a computer's USB port. Most of these provide "CD quality" conversion (16-bits at 44kHz or 48kHz). These may be adequate for digitizing your vinyl, but many computer sound systems can provide up to 24-bit, 192 kHz conversion depending on the software you use (much higher quality), by connecting the preamp output to the computer's line input. Don't just convert directly to MP3 files...you'll lose too much detail compared to the original vinyl sound. It takes almost no time to make an MP3 copy of a WAV or FLAC (lossless) file, but it'll take you an hour to make ANY digital copy of an LP, so do it the best you can the first time!

Product description

PylePro Model : PP555

Phono Turntable Pre-Amplifier

Ultra Compact Phono Turntable Pre-Amplifier w/ 9V Battery Compartment

Features:

Converts phono signals to line level signals

Connects to turntable output bringing phono level up to line level

State-of-the-art circuitry to accommodate magnetic pickups

Ultra-low noise audio operation improves sound performance

Universal compatibility: for turntables & other studio equipment

RCA (L/R) Input & Output Connector Jacks

1/4'' Output Connector Jack

*or battery operated via 9-Volt battery

What's in the Box:

Turntable Pre-Amp

Power Adapter

Technical Specs:

S/N Ratio: 70dB

THD: 0.08% @ 1kHz and 3mV

Output: 2V max (P-P) at 10K Ohms

Frequency Response: 20Hz to 20kHz @ 2dB

Input Sensitivity: 3mV at 50K Ohms (Phono)

Load Impedance: 10K Ohms - Reference Voltage: 1V d

Battery Operated, Requires x '9V' Battery, Not Included

Dimensions (W x H x D): 3.54'' x 2.13'' X 1.02'' -inches

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP555 is perfect for bringing your studio equipment's phono-level output to a more suitable line-level output. Compact preamp features include 9 Volt Battery Compartment, Dedicated RCA 1/4-Inch Output Connectors and power Adaptor. It'll take your audio signal, amplify its strength and prepare it for further processing by your studio equipment. Pre-amps technically provide voltage gain to your desired equipment and are key to assisting the signal source, whether it's a turntable, musical instrument or microphone. The ultra-low noise audio conditioning circuitry allows the pre-amp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources from microphones and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Pre-amps can sometimes come built into the stereo equipment, but if that's not the case, the PP555 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP555 Phono Turntable Preamplifier.

From the Manufacturer

&

	PP444	PP555	PP999	PHE300	PHE400
	Turntable / Phono Pre-Amplifiers			Noise / Hum Eliminators
Jacks	RCA & 1/4''	RCA & 1/4''	RCA	1/4'' TRS	1/4'' TRS & XLR
12V DC Adaptor	✔	✔	✔

• CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
• LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
• CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
• SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs. Can also be powered with 9V battery.

User questions & answers

Question:	Can I use this preamp on a Numark pt1 scratch turntable
Answer:	Yes you can,but this device is cheap as crap. It didn’t work fresh out the box.It only worked with the 9v battery.The DC plug input had like a shortage or something.I had seen all the 1 star reviews but I tried my luck and yeah, no luck at all.
Question:	would the preamp work with a shure c608 microphone or the impedance is to much off. 2.what is the current draw?. 3 how long the battery lasts
Answer:	You need to purchase a preamp that is designed for the input that you are using. Microphone inputs and phono inputs are not the same. Behringer designs different preamps for each of those functions. Check them out.
Question:	I have a turntable with RCA jacks out, then Logitech speakers with a converter from a headphone-type jack to RCA jacks. Do I just need a preamp
Answer:	Yes. You can hook the turntable's RCA jacks to the speaker RCA jacks and get audio. However, if it's an older turntable it may not be grounded, and you will hear a humming sound. Also, your audio will be very low in volume. The pre-amp will eliminate the humming sound, and give you the volume you desire.
Question:	I have an Audio Technica AT-LP60 and Lepai LP-2020A+ Tripath TA2020 Class-T Hi-Fi Audio Amplifier with Power Supply, would I still need a preamp
Answer:	I have the Bluetooth model so your internal pre-amp may or may not be different but I route my turntable through a midi device with onboard sampling and the built in preamp is not enough to boost the signal to useable levels. You can test yours out but I know I need a preamp.

Product description

Converts Phono Signals to Line Level Signals 12-Volt DC 110V Adaptor Included Dedicated RCA Connectors Output Level: 2V Reference Voltage: 1V Load Impedance: 10K Ohms S/N Ratio (with A-WTD): 70 dB T.H.D. : 0.08 for 1 KHz 3 mV Input Frequency Response:20 Hz ~ 20 KHz ±2dB Input Sensitivity / Impedance / Phono - 3 mV / 50K Ohms Dimensions (W x H x D):3.54'' x 2.13'' x 1.02'' Weight : 0.88 Lbs

User questions & answers

Question:	Where does it get its power? Does it operate on a internal battery or have an external power supply
Answer:	It's an external power adapter.
Question:	Will this work for a turntable with built in preamp that doesn’t send signal to a subwoofer
Answer:	No
Question:	Does this have everything I need to connect to my soundbar
Answer:	depends on what inputs you have on your soundbar.

Product description

Features: Audio / Video Home Theater Pre-Amplifier 4-Ch. Pro Audio Receiver System Connects to TVs Sound bars Speaker Systems Built-in Bluetooth for Wireless Music Streaming Front Loading CD/DVD Player Powers up to Loud Speakers Front Panel Control Center with Digital LCD Display AM/FM Stereo Radio USB Flash Drive Reader MP3 Digital Audio File Compatibility Pair Speaker Terminal Binding Posts Pair RCA (L/R) Audio Inputs Aux (3. 5mm) Input Jack 1/4'' Microphone Inputs 1/4'' Headphone Jack Subwoofer RCA (L/R) Output Optical (Digital) Audio Output Video Outputs: S-Video RCA YCbCr (Component Video) Output dB (Decibel) Level LED Display Mic Echo Treble Bass Volume Subwoofer Controls Sleek Brushed Aluminum and Metal Chassis Housing Built-in Ventilation Cooling Fan Universal Rack Mountable Bluetooth Connectivity: Works with All of Your Favorite Bluetooth Devices (iPhone Android Smartphones iPad Tablets etc. ) Bluetooth Network Name: 'BT AUDIO' Bluetooth Network Password: Not Required Bluetooth Version: 4. 2 Bluetooth Wireless Range: 40'+ ft. What's in the Box: Preamplifier Receiver Remote Control Detachable Rack Mount Brackets RCA Connection Cables AM + FM Antennas Power Cable Technical Specs: Amplifier Receiver Type: 4-Channel Power Output: 3000 Watt MAX 450 Watts x 2 @ 4 Ohm 300 Watts x 2 @ 8 Ohm Impedance: 8 Ohm Aspect Ratio: 4: 3/16: 9 Video System: PAL/NTSC Audio S/N Ratio: >90dB Frequency Range: +/-14 dB Quartz Synthesized Radio Tuner Radio Presets: 50 Station Memory CD/DVD Disc Compatibility: DVD/CD/VCD/CD-R/CD-RwithMP4 Power Supply: 115/230V, Dimensions- 16.9 Lx 13.8 W x 5.6 H inches. Sold as: 1 Weight: 22. 64 lbs.

• 3000 watt power: the PYLE 4 Channel Bluetooth home stereo receiver preamplifier is perfect for your Karaoke and home entertainment sound system. Gives you 3000W peak that powers up to 4 speakers W/ 4-8 ohm impedance let you enjoy high-quality audio
• 6 inputs: The speaker amplifier home audio box supports headphone, USB, MP3, AM/FM tuner, aux, front loading CD DVD player, 2 microphone inputs with an echo effect for Karaoke, 2 RCA Audio inputs, RCA output for a subwoofer, and optical Audio output
• Bluetooth-compatible: the professional integrated AM FM stereo receiver for home is equipped w/ Bluetooth wireless music streaming. Works w/ today’s latest devices including iPhone, smartphone, iPad, and computers W/ hassle-free receiver pairing
• E controls: the speaker sound receiver for home stereo has crisp buttons for the audio sources and selectors, Rotary knob for equalization and Master volume adjustments W/ controls for mic, echo, treble, bass, volume, subwoofer controls
• Display meter: The PYLE Bluetooth stereo amplifier Receiver preamp has a front panel control center W/ digital LCD display which shows all the functions and input used. Remote control is also included in the package for distant Audio adjustments

User questions & answers

Question:	I bought this and have 2 bt amp. 1500w speakers for it but won't work. No wire connections on speakers. Strictley bt. Is there a way
Answer:	BT on this unit only receives a connection from a music source like a smartphone.
Question:	Can i run a single subwoofer from this amp
Answer:	No! There is a subwoofer out jack, but it is only a preamp. Therefore, you will have to buy a powered subwoofer.
Question:	Are the two output jacks for the sub woofers in stereo only? I only intend on a single powered sub, but only if this unit can do so in mono
Answer:	Hi, yes the unit can handle mono powered sub. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PD3000BT for more details. Thank you.
Question:	How do I get sound from radio? I get sound from tv,mp3,cd and turn table
Answer:	Hi, please press the input button in front of the unit then choose Radio or FM. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PD3000BT for more details. Thank you.

Product features

4-Channel Home Theater Bluetooth Preamplifier

Features:

• Audio / Video Home Theater Pre-Amplifier, 4-Ch. Pro Audio Receiver System
• Connects to TVs Soundbars Speaker Systems, Built-in Bluetooth for Wireless Music Streaming
• Front Loading CD/DVD Player, Powers up to Loud Speakers, Front Panel Control Center with Dynamic VFD Display, AM/FM Stereo Radio
• USB Flash Drive Reader, MP3 Digital Audio File Compatibility
• Pair Speaker Terminal Binding Posts, Pair RCA (L/R) Audio Inputs
• Aux (3.5mm) Input Jack, 1/4'' Microphone Inputs, 1/4'' Headphone Jack, Subwoofer RCA (L/R) Output
• Optical (Digital) Audio Output, Video Outputs: S-Video RCA YPbPr (Component Video)
• Output dB (Decibel) Level LED Display, Mic Echo Treble Bass Volume Subwoofer Controls
• Sleek Brushed Aluminum and Metal Chassis Housing, Built-in Ventilation Cooling Fan, Universal Rack Mountable

Technical Specs:

• Amplifier Receiver Type: 4-Channel, Power Output: 3000 Watt MAX
• 450 Watts x 2 @ 4 Ohm, 300 Watts x 2 @ 8 Ohm
• Impedance: 8 Ohm, Aspect Ratio: 4:3/16:9
• Video System: PAL/NTSC, Audio S/N Ratio: >90dB
• Frequency Range: +/-14 dB, Quartz Synthesized Radio Tuner
• Radio Presets:30 Station Memory, CD/DVD Disc Compatibility: DVD/CD/VCD/CD-R/CD-RW/MP4
• Power Supply: 115/230V, Switchable, Dimensions (L x W x H): 16.9'' x 13.8'' x 5.6'' -inches

Bluetooth Connectivity:

• Works with All of Your Favorite Bluetooth Devices
• (iPhone Android Smartphones iPad Tablets etc.)
• Bluetooth Network Name: 'PYLE PRO'
• Bluetooth Network Password: Not Required
• Bluetooth Version: 5.0
• Bluetooth Wireless Range: 40'+ ft.

What's in the Box:

• Preamplifier Receiver
• Remote Control
• Detachable Rack Mount Brackets
• RCA Connection Cables
• AM + FM Antennas
• Power Cable

Product description

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card.



Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.

• Dual RCA-type inputs
• Dual RCA-type outputs
• Ground terminal
• Power: 12V DC (Adapter included)
• Dimensions: 1.75 H x 4.2 W x 3.5 inches D (44.5 x 107 x 89mm)

User questions & answers

Question:	Would a jensen jta-230 3 speed stereo turntable work with this
Answer:	Hi, customers. Please press and hold the middle button for more than 5 seconds until the blue light of the button flashes, which is to restore the factory settings.
Question:	does this unit have an on/off stwich
Answer:	It is a plug-in power supply, to an electrical outlet, then to operate on a cell phone or computer.
Question:	how do i know which capacitance option to use (100pf or 200pf
Answer:	Cannot get it to work. Directions not in English.
Question:	Is this what I need to plug an older turntable into a new receiver/amp that does not have a phono jack? When I plug in AUX, there is no sound
Answer:	This is a USB power supply through the computer, laptop, and used for office, entertainment, learning a Sound Bar speaker, 6W power, clear sound, to meet the general needs of the game sound is a good choice, and it saves space, not messy desktop.

Product features

DJPRE II

The DJ PRE II (formerly named the "Phono MicroPRE") acts as an interface between your turntable and your audio recording / playback system. The analog input capacitance can be switched between 100pF and 200pF to optimize your phono cartridge response. A switchable low cut filter removes turntable rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources. The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. The line output jacks are low impedance and can be used with any sound card.

Housed in an all aluminum black anodized case, the DJ PRE II can be powered by a wide variety of external supplies. If you need to amplify and EQ your vinyl records to interface with your audio workstation, sound card, home stereo system or main monitor system, the DJ PRE II gives you flawless audio reproduction in a rugged and reliable package.

ARTcessories

ARTcessories are taking the audio world by storm and quickly becoming a popular brand with musicians, DJs and studio engineers everywhere around the World. Split, combine, mix, power... you name it. On stage, in the studio, in your living room, they’re easy to use and are built to last. For those times when you need a little box to fix a big need or to make more out of a smaller project, ARTcessories has you covered. You’ll discover a robust line of useful tools which include a complete range of direct boxes, headphone amps, small mixers, mic cable combiner/splitters and much more. ARTcessories are designed to deliver affordable solutions for a multitude of audio needs for any size project.

Product description

This electronic preamplifier stands up to the test and will provide you with serious sound performance. The PP999 is perfect for bringing your studio equipment's phono-level output to a more suitable and manageable line-level output. It'll take your audio signal, amplify its strength and prepare it for further processing by your receiver or amplifier. Preamps technically provide voltage gain to your desired equipment and are key to assisting the signal source. The ultra-low noise audio conditioning circuitry allows the preamp to boost audio to levels that are more manageable for various types of audio equipment. You'll find it easier to adjust the recording level volumes of different sources and instruments alike. You should position your preamp close to the source to reduce unwanted noise and interference. Preamps can sometimes come built into the stereo equipment, but if that's not the case, the PP999 is an easy install, wise choice and great addition to any musician or producer. Take your sounds and audio production skills to the next level with the PP999 Preamplifier.   Converts Phono Signals to Line Level Signals 12-Volt DC 110V Adaptor Included Dedicated RCA Connectors Output Level: 2V Reference Voltage: 1V Load Impedance: 10K Ohms S/N Ratio (with A-WTD): 70 dB T.H.D. : 0.08 for 1 KHz 3 mV Input Frequency Response:20 Hz ~ 20 KHz ±2dB Input Sensitivity / Impedance / Phono - 3 mV / 50K Ohms Dimensions (W x H x D):3.54'' x 2.13'' x 1.02'' Weight : 0.88 Lbs Sold as: Unit Weight: 0.74 lbs. Â

Product description

Features:

home theater audio receiver system

high-powered hybrid pre-amplifier

multi-channel source audio selection> built-in Bluetooth for wireless Music Streaming> digital LCD display with AM/FM radio

dual USB device Charge ports> connect & Stream Audio from external devices> MP3 audio file playback Support

USB flash & SD Memory Card readers> aux (3.5mm) input jack

1/4’’ Microphone inputs> headphone jack, 1/4’’ -inch> RCA (L/R) audio Input/output jacks

dedicated subwoofer output> Screw-Type speaker terminal binding posts

front panel button & rotary control center> LED backlight illumination with dimmer controls> microphone & Volume audio Configuration settings> integrated overload & short circuitry protection> Universal rack mount designed> built-in cooling fan



bluetooth connectivity:

receives wireless signal for audio streaming> simple & Hassle-Free Pairing> Works with all of today’s latest devices> (smartphones, tablets, Laptops, Computers, etc.)

Bluetooth Version: 4.2

Bluetooth Network Name: ‘bt-audio’

wireless Range: 35’+ ft.



what’s in the box:

hybrid pre-amplifier

detachable rack-mount Brackets

FM antenna/ BT Antenna

remote controls> power cable



technical specs:

power output: 2000 Watt max> 600 Watt @ 2 ohm

300 watt @ 4 ohm

200 watt @ 8 ohm

frequency response: 40Hz-15kHz, +/-2db

S/N ratio: >76db

T.H.D.: <1%

radio station memory presets: 30

digital media file playback support: MP3/WMA/WAV/FLAC/ape

maximum USB/SD Flash memory support: up to 64 gb

battery operated remote: requires x ‘CR-2025’ battery, included> power cord length: 4.5’ ft.

USB power: 5V/2a

power supply: 110/230V, Switchable> unit Dimensions (L x w x H): 18.89’’ x 12.04’’ x 3.14’’ –inches> Sold as:

Weight: 16.08 lbs.

• 2000 watt power: the Pyle multi-channel hybrid preamplifier receiver is perfect for your home entertainment system. Gives you 2000 watts peak power to be used for multi speaker w/ 2-8 ohms impedance allowing you to enjoy high quality amplified audio
• Bluetooth-compatible: the professional integrated high powered stereo receiver is equipped w/ Bluetooth wireless music streaming. Works with today’s latest devices including smart phones, iPhone, iPad and computers with hassle-free receiver pairing
• 7 inputs: The Pro Audio digital amp box supports headphone, dual USB, SD card, MP3, FM tuner, aux, CD player, 2 microphone input w/ echo for Karaoke or event hosting, RCA Audio input and output dedicated for subwoofer W/ Screw-Type speaker Terminals
• Eq controls: the home amplifier with Bluetooth has crisp buttons for audio sources and selector, Rotary knob for equalization, echo, bass, treble, microphone and Master volume adjustments. Also features LED backlight illumination W/ dimmer control
• Display meter: The rack mount Home theater system receiver has a built-in digital LCD display W/ front panel control center. Equipped w/ built-in cooling fan and integrated overload short circuitry. Remote control and mounting brackets are included

User questions & answers

Question:	I want to convert my surround speakers to wireless. I have a non blue tooth receiver. Can I connect this unit to my receiver via a blue tooth adapter
Answer:	yes, however surond soumd systems have more tjan 2 audio channels, thisone only has 2 channels, you would have to make your system a stereo home system with this.
Question:	Will this support an equalizer
Answer:	It already has a built in equalizer, its preset but works biutifully in by outdoor kitchen. Good bass, mids and highs also strong bluetooth connection. I intalled it with auto speakers
Question:	How do you select the FM stations for the presets
Answer:	The system will scan and pick up the strongest signal
Question:	Can this receiver be outside
Answer:	Hi, yes as long as it is properly covered there. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box P2001BT for more details. Thank you.

Product features

Multi Channel Bluetooth Preamplifier Receiver

The Pyle Multi Channel Bluetooth Preamplifier Receiver provides versatile audio and video entertainment. High-Powered stereo preamplifier performance comes loaded with audio playback features including AM/FM radio, USB & SD flash memory readers, aux (3.5mm) input and two 1/4'' -inch microphone inputs. Connect external surround sound speakers to create a cinema-style media experience in your living room. Bluetooth wireless receiver ability is compatible with all of today’s latest devices.

EQ CONTROLS

The home amplifier with Bluetooth has crisp buttons for audio sources and selector, Rotary knob for equalization, echo, bass, treble, microphone and Master volume adjustments. Also features LED backlight illumination W/ dimmer control

2000 WATT POWER

The Pyle multi-channel hybrid preamplifier receiver is perfect for your home entertainment system. Gives you 2000 watts peak power to be used for multi speaker w/ 2-8 ohms impedance allowing you to enjoy high quality amplified audio

BLUETOOTH-COMPATIBLE

The professional integrated high powered stereo receiver is equipped w/ Bluetooth wireless music streaming. Works with today’s latest devices including smart phones, iPhone, iPad and computers with hassle-free receiver pairing

Front Panel

Button Control Center to easily use the Amplifier.

USB Input

USB ports allow USB devices to be connected to each other.

Speaker Output

Speaker Connectors to produce sound for listeners.

Cooling Fan

Expel warm air from inside.

• COMPACT DESIGN fits on your bookshelf, desk, table so you can connect your turntable to your stereo receiver, speakers, or other audio device in any spot| Powered with 12 Volt AC Adapter (included)
• CONVERTS TURNTABLES PHONO SOUND QUALITY to line level for better sounding audio and volume | 1/4 HEADPHONE PORT lets you plug in and listen directly to music (no volume control)
• NECESSARY FOR CONNECTING TURNTABLE to newer speakers and receivers that do not have a phono input
• EASY TO SET UP OUT OF THE BOX for a simple hook up the preamp to both turntable and audio device so you can enjoy vinyl in no time | ULTRA-LOW NOISE OPERATION for better sound and less distortion
• RIAA EQUALIZATION boosts the volume signal for balanced, clear audio | BACKED BY 3 YEAR MANUFACTURER'S WARRANTY

User questions & answers

Question:	My audio technica only has 2 rca jacks. how can the connection be made
Answer:	As long as your turntable has RCA inputs, this should work just fine. Hookup is simple and amplifier is easy to use.
Question:	Will it work with a jvc la55 turn table
Answer:	There is no on-off switch. The unit draws very little power from its wall-wart power supply which would remain powered-up even with the unit switched off. I recommend leaving it on or controlling it along with the other audio equipment. Powering it up while monitoring its output results in a loud "thump."
Question:	Where would i plug this into my receiver? my denison receiver does not have phono plugs. it does have an aux, cd, and vcr though. which plug
Answer:	You can't "hurt" anything with any of these settings. Of course, you want to use the 'phono' or direct output of the turntable, not the 'line level' or amplified output. just try the 100pf (I think this is more 'standard') and listen for a while. Then try the 200pf setting and see if it sounds better. I think the effects would be mainly small, possibly none.
Question:	Will this work with the U-Turn Orbit
Answer:	Yes, you need a preamp to drive the aux channel on your amp. This one work great.

Product features

Fresh Sound for Vintage Record Players

The GOgroove phono preamp boosts your turntable's phono audio level up to a more speaker/stereo receiver-friendly line level, giving you better volume and increased sound quality. If you're planning on hooking up your turntable to a computer, stereo receiver, bookshelf speakers or any other modern audio equipment, you're going to want this preamp to get the high sound quality that you expect from vinyl.

Modernize Your Equipment

You'll want the preamp to connect to the phono output of the turntable and the line input of the receiver/speakers. And even newer turntables that may feature a built-in preamp probably aren't going to give you the highest quality sound that could be achieved from an external preamp.

Clear Sounding Audio

Complete with RIAA equalization which recognizes that the phono preamp creates smooth equalization for balanced, clear audio. Helps limit distortion and for the best quality sound, make sure to securely plug in all cables.

Quick, Easy Setup

You don't need to be a sound engineer or techie to understand this preamp's setup process. It takes only a minute to power up the preamp with it's included 12 Volt DC Adapter. After that , it's just a matter of using RCA cables (NOT INCLUDED) to hook the preamp to both your turntable and your stereo receiver, speakers or other audio device.

Product description

Features:

1.All aluminum alloy shell,heavy gold PCB,gold-plated interface.

2.Provide Warmth, Dynamic,Sweet tube coloration feeling.

3.Optimize integrated circuit and high quality power adapter to minimize the noise.

4. Vacuum Tubes detechable and replaceable.

5.With Treble and Bass control function, high playability.

6.Compact Design, space saving.



SOMETHING SHOULD BE KNOW

- It is NOT a phono preamp for turntable. To order a PHONO Preamp, please visit B07QBXV3CG.

- The preamp need to connect with a power amplifier or active speaker, can not connect with a passive speaker directly.

- Low-quality audio lines and power adapter will generate noise as a result.



Specifications:

Power Supply: DC 12V/1.5A

Frequency Response: 20HZ -20KHZ((±3dB)

SNR: 98DB

THD: 0.1%

Control：Potentiometer knob and toggle switch

Treble adjustment range: ±6dB

Bass adjustment range: ±10dB

Audio Inputs/Audio Outputs: Gold-plated RCA

Machine Size: 118.5*98*33mm(4.64 * 3.86 * 1.3 inch)



Package Include:

1 x Tube Preamplifier

2 x 6K4 Tube

1 x Power Adapter



About the Noise:

1. Make sure the RCA cables, the tubes and the adapter are connected well.

2. After that, if there's a noise while useing, please change the adapter(12V/1A or 2A) and try again.

3. If there still a noise, please contact with us via email. We provide 3 month no asked refund and 12 month guarantee, will make a solution to you.

• 🎵NOTICE - This is a preamplifier but NOT a power amplifier or a phono preamp, CAN'T be used for turntables or passive speakers. The main purpose of this machine is to act as a "buffer" to sweet the sound.
• 🎵SWEET TUBE SOUND - Vacuum tube preamp will give you a different acoustic enjoyment with dynamic, sweet tube sound enjoyment. Improve the details, richness, tone associated with your music.
• 🎵TUBES REPLACEABLE - The 3D sound quality of a good tube implementation is simply divine! Tubes detachable design, you can replace the tube to tweaking the sound, 6j1,6j2,6J4,GE5654,6AK5 and 6*1n tubes are suitable for this preamp.
• 🎵 RCA INPUT & OUTPUT - Connect your computer, CD, phone, iPod and other player with RCA cables input and output to the digital amplifiers, active multimedia audio devices for lossless audio(The RCA cables not included).
• 🎵 SAFE DESIGN & AFTER SALE SERVICE: All aluminum alloy shell, compact and durable.Built-in Switch impact protection circuit and overheat protection circuit, long life span of this unit. Provide 12-month manufacturer's warranty, no risk purchase.

User questions & answers

Question:	Can i use this product from a 3.5 mm headphone jack on a tablet to a rca line input on a stereo receiver
Answer:	Yes, you will need to use a cable that has RCA plugs in one end and a headphone plug (1/8") on the other. The headphone plug goes into the tablet and the RCA plugs go into the input of the SUCA-AUDIO. You will use another cable with RCA plugs on both ends. Plug in the RCA plugs on one end into the outputs of the SUCA-AUDIO. The RCA plugs on the other end go into your stereo receiver inputs.
Question:	I'm using philips shp9500 headphones. at a maximum of 32 ohms, could i just combine my headphones with this pre-amplifier without an amp? (pc dac
Answer:	This is a pre-amplifier, not a headphone amplifier. Headphones like the Sennheiser HD6xx could be used because of their high impedance (600 ohms) at a low volume. The 32 ohm Philips headphones may cause issues with this pre-amp.
Question:	I am looking to make the audo louder from my computer to amplifier will this do it? thanks
Answer:	Not really . . . : A preamp (and this is a preamp) only raises the volume of the signal slightly . . . an amp, or amplifier raises it to levels that can power passive speakers. Active speakers have an amp built in. So, you can go from computer to an amp, or from a computer to powered speakers and don't need a preamp. Or, go from the computer to this preamp, then to an amp or powered speakers. You don't NEED a preamp at all if you have an amp, but you can use one if you want to add a volume knob in between the source and speaker, or want to add a tube pre like this for 'color' to alter the qualities of the sound. Sounds like you want an AMP not a preamp otherwise.
Question:	could I use this for a turntable preamp if I had powered speakers
Answer:	No. This preamplifier does not apply RIAA equalization that vinyl playback requires. You will notice that the treble is too loud and bass is severely reduced when you play vinyl.

Product description

Overview

Designed to amplify and EQ your vinyl records, the DJ PRE II from ART allows you to play and record into a variety of sources including your digital audio workstation, sound card, home stereo, or main monitor system.The DJ PRE II features a switched (100pF / 200pF) analog capacitance to optimize your phono cartridge response. A low cut filter removes turntable rumble, while leaving the audio pristine. The front gain control and signal/clip LED allow you to optimize the preamp's gain for a wide range of input sources.Plus a Pearstone 2 RCA Male to 2 RCA Male Audio Cable (3')



In the box



ART DJ Pre II Turntable Phono Preamplifier with RIAA EQ

Power Adapter

3-year Limited Warranty



Pearstone 2 RCA Male to 2 RCA Male Audio Cable (3')

3-Year Warranty

• Phono Preamp for Recording and Playback
• Switchable Input Capacitance: 100pF/200pF
• Low Cut Filter Switch
• Gain Trim and Signal Gain/Clip LED
• Low Noise

User questions & answers

Question:	Does this equipment take the place of the "phono" and "ground" that my yamaha receiver is missing, so i can play my records on my turntable
Answer:	There are 4 RCA connectors on the back of the pre-amp. Two are for input from the turntable jacks and two are outputs to the receiver or amplifier.
Question:	I have a old school sanui turntable with a ceramic cartrige. will this pre amp work with a ceramic cartrige
Answer:	Probably will. I used it on a vintage technics turntable and worked fine.
Question:	Is this device compatible with the Audi Technica lp120 turntable even without a ground wire
Answer:	The pre-amp takes the "small signal" from your turntable and increases the signal for another input to your receiver (e.g.; AUX, CD or VCR.) If you had a phono input, you would not need the pre-amp.
Question:	Has anybody heard the u-turn pluto preamp? is it worth paying double vs. the art dj
Answer:	Yes, if you bought one without a built in preamplifier. Even if your receiver has a phono input, but does not sound that good, you can plug this into an AUX, DVD, or even CD input, and it will boost the signal. I can't believe all the ridiculous answers from people. If any one is curious, there's something called Google out there, use it and type in U-Turn audio!!!

Product description

—— SATISFACTION GUARANTEED —— Your satisfaction is our #1 priority. If this item fails to meet your expectations we will accept it back a full refund within the first 30 days. We also stand behind this product with a limited 1-Year manufacturer warranty. Contact us if the item should show any defect, we will help exchange it for a new one.

• Ultra-compact phono preamplifier with metal body, portable and durable.
• 2 * RCA (L & R) inputs, 2 * RCA (L & R) outputs, 1 * 1/4 inch TRS output, multiple connection choices.
• With level and volume control knobs.
• For converting the phono signal to a line high level signal.
• Ultra low-noise audio performance offers excellent sound quality.

User questions & answers

Question:	What's the difference between "level" and "volume" controls on this product? (Normally, these terms are synonymous
Answer:	"level" is the signal gain and "volume" is the volume level.
Question:	Can i connect my old cd player and my old turntable to this unit? how would it switch from one to the other
Answer:	What reciever or main amp are you using? The old turntable and CD player do not have built in pre-amp. Normally these little pre-amp are used for newer surround sound receiver/systems with out phone in, CD in.
Question:	What's the difference between "level" and "volume" controls on this product? (Normally, these terms are synonymous
Answer:	The "level" is for the gain for the signal of RCA (L/R) output connected to your receiver/amplifier; while the "volume" is for the signal output of the 1/4" TRS jack connected to a headphone or amplifier .
Question:	What is the max gain amount in dbv? and does this have riaa pre-emphasis eq
Answer:	14db, a simple amplifier.

Product description

Since many modern amplifiers no longer have a dedicated phono input, the phono box mm from Pro-Ject is the perfect addition to your turntable setup. Compatible with nearly any moving magnet cartridge, the phono box mm gives you a superb audiophile music experience at an entry-level price. The utilization of advanced circuitry keeps noise and distortion extremely low, and the metallic case and outboard DC power supply keeps the unit free from electromagnetic interference. Since it's only slightly larger than a pack of playing cards, the phono box mm can be placed nearly anywhere. The RCA input and output sockets are gold-plated to preserve sound quality and can be connected directly to any line-level input (aux, CD, Etc.) on your amplifier.

• Compatible with moving Magnet phono cartridges
• Dual-mono circuitry for optimized Channel separation
• Low-noise integrated circuits
• Gold-plated RCA inputs and outputs
• Metal case protects unit from vibrations and electromagnetic interference

User questions & answers

Question:	Can i play vinyl from my B&O 3400 turntable & cartridge thru a vizio soundbar model# s4251w-b4? Do I need to use my pyramid sea2500x preamp too
Answer:	Most likely. I go from my record player to this to a mixer. So I'm guessing your receiver probably has an aux in which is what you plug into from the art.
Question:	Do i need to buy this for yamaha A-s801 integrated amp or that amp has a phono
Answer:	Sansui? Ceramic's, as I recall, can run close to 1 V output. This preamp is designed for moving magnet cartridges (not moving coil) that produce ~ 5 mV output. Even at -10 dB on the gain/attenuation knob, it would still be too hot. 1 V with -10 dB attenuation is ~ 300 mV which is far more than supported. Per manufacturer, max input is 40 mV. So, no, this won't work with your ceramic cartridge.
Question:	Just to be clear, my AVR (Onkyo tx-nr535) doesn't have a phono input. Do I connect the turntable to this device and plug this device into my AUX port
Answer:	Without a ground wire, there may be a discernible hum. I have a Yamaha PF 1000 and the ground wire is is a must.
Question:	How can i tell if my pioneer pl-460 is mm or mc
Answer:	I've had both, and kept the DJpre. There's a thread on an audio science forum where a user conducted a thorough level-matched test of both the Pluto and the DJpre with an oscilloscope and other precision instruments. They both performed very well, but the DJpre came out decidedly on top in several key categories. Whether that translates to a noticeable difference in sound quality depends on the listener, but the DJpre is empirically better than the already good Pluto. He also found that the DJpre performed best when the low cut rumble filter was on--not only did it kill the sub-20hz sounds, it actually boosted the audible frequency response across the board (particularly the highs where the Pluto tends to roll off). This is easily the best phono pre at $50 and under, and performs better than units costing twice as much. You'd have to spend $250+ to get a better pre, and even then it'll only be a miniscule improvement.

Product features

Features

• Amplification and RIAA equalisation for MM and High-Output MC cartridges
• Metal case shields the electronics from vibrational and electromagnetic interference
• Special low-noise ICs used
• Optimal channel separation through dual-mono circuitry
• Gold plated RCA connection sockets
• DC power supply (< 1 watt standby power)
• Small size allows installation close to record player

Audiostance reviews the Phono Box MM

US, 05.2019 "If your budget is maxed at 100 then the Pro-Ject Phono Box MM is the best phono preamp under 100. Pro-Ject Audio is a high-end turntable and phono accessories manufacturer out of Austria in Europe."

Product description

Pro Audio Bluetooth Pre-amplifier Receiver System - Digital Rack Mount Studio Preamp, Recording Mode, FM Radio



Features:

• Rack Mount pre-amplifier Sound Receiver System

• Bluetooth Wireless Audio Streaming Ability

• Unique Recording Mode Saves Audio via USB/SD Port

• USB Flash & SD Memory Card Readers

• Aux (3.5mm) Input Jack

• Connect & Stream Audio from External Devices

• FM Radio with Digital LCD Display

• ID3 Tag Readout Displays Song Title

• Multi-Source RCA (L/R) Audio Input Connectors

• RCA (L/R) Audio Output Connectors

• Combo 1/4’’ / XLR Combo/Microphone Input Jack

• XLR Audio Output Jacks

• Front Panel Button Control Center

• Independent Input Source Selectable

• Bass, Treble, Mid, Balance, Master Volume Adjustable

• Headphone Jack, 3.5mm



Bluetooth Connectivity:

• Built-in Wireless Music Streaming Receiver

• Compatible with All of Your Favorite Bluetooth Devices

• (iPhone, Androids, Smartphones, iPad, Tablets, etc.)

• Bluetooth Version: 2.1

• Bluetooth Network Name: BT

• Wireless Range: 25’+ ft.



What's in the Box:

• Remote Control

• FM Antenna

• Detachable Hardware Rack Mounts

• Power Cable



Technical Specs:

• Rated Power input: 7W

• Input currency: 30mA

• Max power consumption: 15W

• Construction Material: Metal, Aluminum Alloy Panel

• Frequency response: 20-20KHz, +/-2dB

• S/N Ratio: >85dB

• T.H.D.: <1.0%

• Input sensitivity: 200mV (Max Output: 6000mV)

• Battery Operated Remote Control, Requires x ‘CR-2032’ Battery (Included)

• Maximum USB Flash & SD Memory Card Support Size: 32GB

• Digital Media File Support: MP3, WAV

• Power Cable Length: 4.5’ ft.

• Power: 120/240V, Switchable

• Dimensions (L x W x H): 19.0’’ x 4.7’’ x 1.7’’ -inches

• Sold as: 1

• Weight: 4.61 lbs.

• RACK MOUNT COMPATIBLE: Pyle pro audio pre-amplifier has FM radio tuning and unique recording mode that saves audio via USB/SD port. Also, pack with detachable hardware rack mounts for quick and easy assembly
• 2. 1 BLUETOOTH VERSION: Built-in Bluetooth for wireless music streaming receiver that ranges up to 25’+ ft with digital LCD display. It works with all of today’s latest devices such as iPhone, android, smartphone, iPad, tablets, computer and the likes
• AUX INPUT AND OUTPUT: This receiver/preamp also features two sets of RCA inputs, RCA preamp out, 2 Mono RCA's for subwoofer output, and Bluetooth that wirelessly connects to your iPod and MP3 player. Also, an FM antenna for better signal reception
• FRONT CONTROL CENTER: The front panel button control center consists of a power switch, independent input source selectable, bass, treble, mid, balance and master volume adjustment. Also, pack with headphone jack, USB flash and SD memory card readers
• REMOTE CONTROL: A simple and user-friendly remote control is included with the PPRE70BT, providing all the functionality you need from switching input sources. And, it will allow you to access all functions of the receiver quickly and efficiently

User questions & answers

Question:	How many watts is this amplifier
Answer:	This is not an amplifier, it is a pre-amplifier which means that you need a separate amplifier in order to drive speakers.
Question:	The description says two (02) mono rca outputs for subwoofers. where are they
Answer:	You're right that the description says that there are 2 mono outputs for subwoofers but I think that is an error. The picture that there is of the back of the unit is correct, as is the labeling that accompanies the picture.
Question:	can you use rca in and bluetooth out
Answer:	No. The Bluetooth feature is only for receiving from a Bluetooth device as a source.
Question:	Can someone confirm that the remote control can in fact control the master volume on the preamp unit
Answer:	Neither of the other two answers are correct! Here’s the deal. This device has an analog knob with aux 1, aux 2, aux 3, and another multi-function input that includes the radio, bluetooth, and the media card stuff. The volume only works on some of the inputs. Bluetooth, radio, and the media card are routed through the digital, remote controllable volume control. The switch between Aux 1, aux 2, aux 3, and the multi-function input is routed through the master analog volume control, which is controlled by an analog knob that is not remote controllable. I had hoped that this device would offer remote control of the analog RCA inputs, but it does not.

Product features

Pyle Pro Rack Mount Studio Pre-Amplifier

Pyle's Stereo is the perfect solution for all of your audio needs. Using the latest sound amplification technology, this is designed to deliver crisp stereo sounds from a wide range of connected music sources. This pro digital rack-mount preamplifier features FM radio and Bluetooth connectivity. Unique recording mode that saves audio via USB/SD Port.

About Pyle

Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear.