12 best stereo speaker switches
Stereo speaker switches, also known as speaker selectors or speaker switches, are devices used in audio setups to route audio signals to multiple pairs of speakers from a single amplifier or receiver. They are commonly used in home audio and home theater systems to distribute audio to different areas or rooms.
Here are some key points about stereo speaker switches:
Purpose: Speaker switches are primarily used to control and distribute audio to multiple sets of speakers from a single amplifier or receiver. This can be useful in situations where you have multiple rooms or zones that require audio, such as in a multi-room audio system.
Multiple Speaker Zones: Speaker switches typically support multiple speaker zones, which means you can connect and control speakers in different areas of your home. This allows you to play audio in one room while muting or adjusting the volume in another.
Impedance Matching: Some advanced speaker switches come with impedance matching capabilities. Impedance matching ensures that the amplifier sees a consistent load from all connected speakers, preventing overloading and potential damage to the amplifier.
Volume Control: Certain speaker switches also include volume controls for each speaker zone. This feature allows you to adjust the volume independently in different areas, giving you greater control over the audio distribution.
Protection Circuitry: Many speaker switches include protection circuitry to safeguard your amplifier or receiver from damage due to short circuits or improper speaker connections.
Compatibility: It's important to ensure that the speaker switch you choose is compatible with the impedance and power requirements of your speakers and amplifier. Using a speaker switch that doesn't match your setup can result in poor audio quality or damage to your equipment.
Wiring: Proper wiring is crucial when setting up a stereo speaker switch. You typically connect the amplifier/receiver to the input of the switch and then connect the individual speaker pairs to the output terminals corresponding to their respective zones.
Control Options: Speaker switches may offer various control options, such as manual switches, remote control, or smartphone app control, depending on their complexity and design.
Application: Stereo speaker switches are commonly used in home theaters, multi-room audio setups, and outdoor speaker systems, allowing users to enjoy audio in different parts of their home or outdoor spaces.
Quality Considerations: Investing in a high-quality speaker switch is important to ensure reliable and high-fidelity audio distribution. Lower-quality switches may introduce signal loss or impedance mismatch issues.
In summary, stereo speaker switches are useful devices for distributing audio to multiple speaker zones from a single amplifier or receiver. They offer control, protection, and flexibility in multi-room audio setups, enhancing the audio experience in your home. It's important to choose a speaker switch that matches your specific audio setup and requirements for the best results.
Below you can find our editor's choice of the best stereo speaker switches on the market
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 4 Pairs Of speakers - Pyle (PSS4), Black
Pyle
Product description
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
- CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible |
| Answer: | I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you. |
| Question: | Does this switch allow me to control sets of speakers independently |
| Answer: | I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp. |
| Question: | One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist |
| Answer: | Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier. |
| Question: | How do I hook this up to my 5.1 receiver |
| Answer: | The sound is great there is no distortion. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
4 Channel Speaker Selector Switch - Multi Zone A B Speaker Distribution Controller Box w/ Independent Audio Source Volume Control, Supports Home Theater Stereo Amplifier Receiver System - Pyle PSLSW4
Pyle
Product description
Pyle Model : PSLSW4
4-Ch. Speaker Selector System
Multi-Zone Speaker Selector, 4-Channel Audio Speaker Receiver System
Features:Technical Specs:
- 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
- CONTROL 4 SPEAKERS: The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
- INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair
- EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
- OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability
User questions & answers
| Question: | Will fit on slider rack shelf with 16 inches wide and 15 inches deep? thank you |
| Answer: | Good question. There are two things you should know before you pull the trigger on this. Banana plugs don’t insert far enough to stay put, and since I have this box hooked up to amplified speakers I kept getting a buzz. I bought special banana plug pig tails which I ended up removing because of said problem. What did work very well for me was to remove the banana plugs and strip and solder the speaker wires then tighten the threaded part against the inserted wire in the hole on the shaft, a very tight connection and that worked great. The other issue is you can’t turn off one the speakers which was reported in one of the comments. It is annoying but for my application one set of speakers is downstairs with their own volume control so, I just adjust the volume on them when in use. Hope this helps. |
| Question: | I don't understand the description. what does the a /b button at each speaker volume control mean? doesn't the speaker pairs selected play together |
| Answer: | Hi, I have one of these (returning the 1st one due to poor speaker terminal , I find that it will accept a 4mm and thicker Banana Plug. Amazon's model was poor fit, but MediaBridge's plug in more securely. I have not fully connected my XtremePro yet, but I hope this helps. |
| Question: | Can the speaker connectors take banana plugs as opposed to threading the wires |
| Answer: | I may not be understanding your question correctly, but with this item I am using the volume control on my amp for the front speakers and the volume on this device to control the volume on the rear speakers. So yes, I can set one set of speakers at a different volume that the other. Again, if I am understanding your question correctly. |
| Question: | So I can hook up 4 sets of speakers on my new Pyle unit all on one receiver without worry of damage? Looked like chart had impedence fall off to |
| Answer: | Yes as far as I can tell. Aka-when I only have on speaker on and flip the switch to turn another group on, the volume drops. It’s not necessarily half the volume though. |
Product features
4-Ch. Speaker Selector System
This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly.
CONTROL 4 SPEAKERS
The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
INDEPENDENT AUDIO CONTROL
Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair. Distribute your music to every room in your home with this 4 Channel Speaker Selector from Pyle.
EASY SETUP
Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
Protection
Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.
Watt
The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
Dimensions
The Pyle Multi-Zone A B Speaker Selector Switch has a (L x W x D): 16.9'' x 6.3’’ x 3.0'' dimensions.
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 6 Pairs Of speakers - Pyle (PSS6),Black
Pyle
Product description
PyleHome Model : PSS6
6-Ch. Stereo Speaker Selector
6 Channel High Power Stereo Speaker Selector
- Up to 6 Separate Speaker Pairs to Your Stereo System
- Accepts Speaker Wires up to 14-Gauge
- Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms
- Protection Circuitry Keeps It Running Smoothly
- Frequency Response: 20Hz-20KHz
- Dimensions: 9.05''(W) x 1.85''(H) x 5.90''(D)
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 6 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
- CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I am installing in-wall speakers in multiple rooms. My question is what is the best cheapest in-wall volume controller that would work with this speaker selector |
| Answer: | There is no difference in for the install if you mount speakers in the wall or ceiling. |
| Question: | Several questions, How do you hook it to your stereo, I am hard of hearing so I hooked 3speakers to my stereo system,this is hooked to my tv when I turn it up some times it turns off by it self I do not understand that I would like more speakers all the 5 star reviews makes this product sound real good. the receiver |
| Answer: | I think so. They mount with a screw and clamp. The screw is accessible behind the removable front grill. The speaker comes with a template so you know what size to cut out in the wall or ceiling. After you insert the speaker into the recess, as you turn the screw, it tightens the clamp onto drywall, securing it in place. Although it is designed for drywall, I think it will work on anything with approximately the same thickness (~3/4 inch thick). |
| Question: | How Do You Hook A PSS6 Speaker Selector To A Pyle PCAU46A |
| Answer: | I would recommend a 5.1 home audio receiver. |
| Question: | can i play all 6 speakers at the same time |
| Answer: | The pyle pta44bt would be a good amp for the speakers. |
Product features
Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
Premium New and Improved 4 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box for Multi Channel High Powered Amplifier Control 4 Pairs Of speakers - Pyle PSPVC4
Pyle
Product description
Up to 4 Separate Speaker Pairs to your Stereo System Accepts Speaker Wires Up to 14- Gauge Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms Protection Circuitry Keeps it Running Smoothly Individual Speaker Volume Control Support Two Stereo Amplifiers Frequency Response: 20Hz-20KHz Dimensions: 16.92''(W) x 3.03''(H) x 6.29''(D) Sold as: Unit Weight: 9.32 lbs. This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly. Accepts speaker wires up to 14 gauge.
- BEST PERFORMANCE SPEAKER SWITCH WITH VOLUME CONTROL:The new and Improved Multi Channel stereo speaker selector with volume control can control the volume and select what speaker you want to play without have to go to the amplifier each time.
- CONTROL POWERED 4 CHANNEL AMPLIFIER: With the 4-channel a/b/c/d speaker selector w/ volume control You Can Control the volume and Switch on of each speaker or play all speakers at the same time.From and high power and low powered stereo amplifiers
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Volume Control Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is powered by your stereo - Just plug in the wires to Control any High Powered Amplifiers from Pyle Crown Denon Sony Panasonic Yamaha and Many More.Control 4 10 4 6 8 inch Speaker Box.Frequency Response: 20Hz-20KHz
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch and Volume Control we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked.
User questions & answers
| Question: | Is this rack mountable |
| Answer: | Hi, no it is not mountable. However, you may customize your own rackmount. Thank you. |
| Question: | can I use this amp with my sony str 1030 reciever to add additional power |
| Answer: | This is not an amp. It takes an output to speakers and can run different sets of speakers. If you do not have enough power in your receiver to run the speakers it will not work. Each time you turn on a set of speakers it will drop the power by a percentage. Some receivers can not handle more then three sets. |
| Question: | Can one of the zones I hook to be a powered subwoofer (which itself feeds a pair of small speakers |
| Answer: | No you cannot hook up a powered sub woofer to a speaker selector |
| Question: | Will this work with an old devon dra 35v receiver from the mid 80s? i have 4 pairs of speakers and might need to use at least three pairs at a time |
| Answer: | I do not recognize the Receiver you are referring to but the connections are very simple. The speaker wires that are driving your speakers will be shortened and then connected to the Pyle Home speaker selector. Then your speakers will be connected to the Pyle Home speaker selector to each of the different four zones that you have in your home/office/whatever. I am presently driving three pairs of speakers with one zone unused. I have had perfect performance. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly. Accepts speaker wires up to 14 gauge.
- Up to 4 Separate Speaker Pairs to your Stereo System
- Accepts Speaker Wires Up to 14- Gauge
- Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms
- Protection Circuitry Keeps it Running Smoothly
- Individual Speaker Volume Control
- Support Two Stereo Amplifiers
- Frequency Response: 20Hz-20KHz
- Dimensions: 16.92''(W) x 3.03''(H) x 6.29''(D)
8Bitdo Twin Cube Stereo Bluetooth Speakers
8Bitdo
Product description
8Bitdo Twin Cube Stereo Bluetooth speakers feature true stereo, wirelessly. You can use them both together in stereo, or just use one individually.
- Bluetooth Stereo Speakers
- Use both speakers together in stereo, or one individually.
- Two colored wireless speakers, switch blue and switch red.
- Control your speaker with the DPAD.
- Can only be used on Nintendo Switch with direct AUX input, no Bluetooth Switch compatibility
User questions & answers
| Question: | Can I skip songs with the buttons on the speaker |
| Answer: | Comes as a set. 4 speakers (2 woofers, 2 tweeters) |
| Question: | Are aux splitter cable(s) included for switch use? --- "can only be used on nintendo switch with direct aux input, no bluetooth switch compatibility |
| Answer: | Should fit the rear doors fine might need to set a new screw hole since the stock ones usually only use 3 and these are much more secure with 4. The fronts though... pretty sure those are 5.25 inch so these wouldn't work... or at least not nicely |
| Question: | Am i able to use these with my Echo Dot in stereo mode |
| Answer: | Si |
| Question: | Can I use these as computer speakers with the aux cable |
| Answer: | Price should be per pair. Ccx designation shows it is not mx series. |
in Wall Speaker Selector Switch - Home Audio 2-Channel A/B Dual Channel Speakers Controller Pod Box - Control and Activates (2) Pair of Indoor or Outdoor Speakers - Pyle PVCS2
Pyle
Product description
PyleHome Model : PVCS2In-Wall / Wall Plate Speaker SelectorIn-Wall Speaker Selector Switch, Wall Plate Speaker Control Features: Convenient Speaker SelectionSimple Push Button Operation Possible Configurations: A, B, or Both (A + B)Terminal Block Speaker ConnectorsUniversal Standard Wall Plate SizeFits Standard Electrical Junction / Gang BoxesCompatible with All Audio / Video SystemsIncludes Decorative Frame Plate Cover120 Watt Load Power HandlingThe Pyle PVCS2 is an in-wall A/B speaker selector switch that installs in a junction box, just like a light switch. This switch makes it simple to direct your home amplifier's audio to two sets of speakers, such as one set indoors and one set outdoors. Activate the A speakers, B speakers, or both. Easy push button operation allows you to activate or deactivate your speakers quickly. The included wall plate frame cover allows for a clean installation for your walls. Take control of the audio with the Pyle PVCS2 Wall Plate Speaker Control Selector Switch.
From the Manufacturer
- EASY TO INSTALL: The Pyle in-wall A/B speaker selector switch installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers
- PUSH BUTTON OPERATION: The smart indoor outdoor speaker control features a convenient and simple push button selection which makes operation a breeze! Activating or deactivating the A speakers, B speakers, is as easy as a push of a button
- CONFIGURATIONS: Featuring three configurations to choose from: select A speakers, B speakers, or both A and B (A+B) speakers. The easy push button operation allows you to activate or deactivate your preferred set of speakers quickly
- UNIVERSAL COMPATIBILITY: The 2-channel speaker controller is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. Also features up to 120 watt power load handling and terminal block speaker connectors
- STANDARD SIZE: It features a universal standard wall plate size. The included decora-style wall plate frame cover means this switch will unobtrusively blend into your wall and allows for a clean installation on your walls
- Connector type: usb
Product features
In-Wall Speaker Selector Switch
The Pyle in-wall A/B speaker selector switch installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. The easy push button operation allows you to activate or deactivate your preferred set of speakers quickly.
PUSH BUTTON OPERATION
The smart indoor outdoor speaker control features a convenient and simple push button selection which makes operation a breeze! Activating or deactivating the A speakers, B speakers, is as easy as a push of a button
EASY TO INSTALL
A/B speaker selector switch installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers
CONFIGURATIONS
Featuring three configurations to choose from: select A speakers, B speakers, or both A and B (A+B) speakers. The easy push button operation allows you to activate or deactivate your preferred set of speakers quickly
UNIVERSAL COMPATIBILITY
The 2-channel speaker controller is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. Also features up to 120 watt power load handling and terminal block speaker connectors
Xtrempro 61048 2 to 4 Way Speaker Switch, 1 in 2 Out to 1 in 4 Out Way Pair Stereo Speaker Selector W/Terminal Clamps Metal Non-Slip Box - Black (1 x 2 Way)
Product description
XtremPro 2 to 4 way speaker switch, 1 in 2 out to 1 in 4 out way pair stereo speaker selector w/ terminal clamps metal non-slip box - Black Features: the product is designed to use two pairs of loudspeakers connected to one amplifier. The pairs of loudspeakers can be used simultaneously or separately. The product features a metal housing and two separate rocker switches. This design eliminates interference and volume reduction. amplifier inputs x1 speaker output x2 or x4 load: 150 W per Channel Cable cross-section: max. 2. 5 mm² loudspeaker resistance: 4 - 16 ohms package contents: main unit x1 user manual x1 connection: failure to observe the following instructions can lead to damage to the product, The loudspeakers, and the amplifier. Turn off the amplifier; before connecting the cables. Check all cable connections before turning on the amplifier. Insert the strands correctly into the connections. Failure to do so poses a risk of short-circuiting. Use Suitable loudspeaker cables only. Connect passive loudspeakers to the loudspeaker outputs only(No active loudspeakers). connect the amplifier input to the loudspeaker outputs of a suitable audio amplifier only. Refer to the user manual of the amplifier and the loudspeakers concerning their respective; technical data and any special information concerning their connections.
- 2 or 4 channel stereo speaker control, allow conventional amplifier or stereo receiver to drive multiple sets of speakers, without the need for external impedance matching devices
- Ideal for low cost Distributed audio in residential or commercial sound applications
- Individual control of each speaker pair. Impedance constant at 4-16 ohms, 150w(per Channel), 300W max, Cable length: Max 164ft/50m
- Just hooked up to the stereo. No extra power supply needed
- Metal non-slip box, 5in x 3in x 1. 5in (2 way) and 9in x 3in x 1. 5in (4 way)
- Connector Type: HDMI
User questions & answers
| Question: | If both speakers are on, would the impedance be similar to running two in parallel? A pair of 4 ohm speakers would draw 2 ohms |
| Answer: | When unscrewing the banana plug the inner hole can accommodate up to 4 mm plug . |
| Question: | Can i push 300rms through this |
| Answer: | The short answer is no. You will be taking the high level output from your first amplifier to the low level input of your second amplifier. At the least this will result in distorted sound. At worst you will damage one or both amplifiers. |
| Question: | ga wire is too big . What size banana plugs can I use and would right angle ones work best |
| Answer: | Yes, for left and right. I switch my main pair of speakers between one amp for my turntable and another amp for surround which also uses that same main pair in addition to a center and a sub. In other a pair of speakers can switch between two amps. |
| Question: | What is Max gauge wire |
| Answer: | Must be a mistake. There is no HDMI |
NETmate 2 PORT 3.5mm STEREO Manual Switch Box AUX Audio Speaker selector(Wall Mount Hole Built-in, wall or table available)
Miraview Netmate
Product description
STEREO 2: 1 bidirectional selector The stable button-type 3.5mm STEREO manual selector is a two-way manual selector that can be selected by connecting two audio sources to one speaker or one audio source to two speakers.
- STEREO 2 (input / output): 1 (input / output) selector
- Easy button type STEREO selector
- 1 ~ 2 port: 3.5mm STEREO, IN / OUT port: 3.5mm STEREO
- Non power operation
- Cable not included
User questions & answers
| Question: | can this be reversed to allow two inputs going to one output For example, two sound sources into one headset or speaker |
| Answer: | Take the speakers lines running out of your stereo receiver plug them into the unit . Then you can split the Signal . |
| Question: | Can i have 2 inputs output at the same time? or can you only switch between one or another |
| Answer: | No holes for wall mounting. You would need to make one for it. |
| Question: | Is there any 'pop' sound when switching outputs, as if you plugged in speakers while they were on |
| Answer: | Yes, you have to wire it backwards of course - amps to speaker outputs, speakers to amp input. There are 1.8 ohm resistors in series with the amp output terminals so you will lose some volume. Also, they're only 5w so they won't take much power. I've played movies and CD at normal to loudish levels tho and they barely get warm if at all. I wouldn't turn it up to 11 tho. Finally, you MUST take great care and insure that only one amp is connected at any time. Even an amp that is turned off could be damaged by one that is on, never mind if they were both on. |
| Question: | I bought a way cheaper switch box & boy does it sound like it. It sounds like its playing in a tin can. How do this one fair |
| Answer: | Since the “Amazon 2x4 selector” is basically a switch box (completes the amp to speaker pair circuit you want) my gut says yes. But since you would be reversing the intended signal direction I can't comment on if auto impedance correction and overload protection, or even volume control will perform properly. And by reverse signal direction I mean to get your desired 4 amps mapped to 2 speaker pairs (4x2) rather than the intended 2 amps mapped to 4 speaker pairs (2x4) you would have to reverse your cable hookups on the back of the “Amazon 2x4 selector”. In other words you would have to connect your amp1, amp2, amp3, amp4 to “Amazon 2x4 selector” speaker1, speaker2, speaker3, speaker4 output jacks. And also connect your speaker1, speaker2 to “Amazon 2x4 selector” amp1, amp2 input jacks. Now with this configuration the “Amazon 2x4 selector” A/B amplifier button next to each volume knob will really be your speaker1, speaker2 selector. And your amplifier selector will probably have to the amplifiers themselves since you would want avoid sending more than 1 amplifier signal to any one speaker pair. Setting a volume knob to zero will may also accomplish this but I can’t be sure. Now what is the risk in trying this? Since the “Amazon 2x4 selector” is not powered (no power cord/supply directly to it) I think it is low. If it doesn't work you still have a really good 2x4 capability with auto impedance correction and overload protection. And if you are really persistent you could get (or build) two very simple 4x1 selectors. Label one of them A and one B. Connect all four amps to A selector and all four amps to B selector. Then connect A selector to Amp A input on “Amazon 2x4 selector” and connect B selector to Amp B input on “Amazon 2x4 selector”. Good luck. I applaud you desire to get it the way you want. |
In Wall Speaker Volume Control - Home Audio Smart Speakers Stereo Controller Selector Switch Pod Box - In-Wall Vertical Sliding Control, For Home Theater Indoor or Outdoor Remote Speakers - Pyle PVC2 WHITE/BLUE
Pyle
Product description
PyleHome Model : PVC2
Wall Mount Audio Volume Control
Wall Mount Volume Control, In-Wall Vertical/Sliding Speaker Volume Knob (Impedance Matching)
Features:What’s in the Box:
Technical Specs:
The Pyle Wall Mount Volume Control, In-Wall Vertical/Sliding Speaker Volume Knob (Impedance Matching) - Speaker & Stereo System Control - Convenient Audio Source Volume Setting - Audio and Video System Compatibility - Flush In-Wall / Wall Mount Installation Plate Style - Multi-Position Sliding Soft-Touch Adjustment - Suitable Companion for Hi-Fi Four-Pair Speaker Selector - Perfect for Home, Office or Business Applications - What’s in the Box: - In-Wall/Wall Plate - Decorative Finishing Frame - Mounting Ring/Installation Wire Nuts - Technical Specs: - Universal Standard Wall Plate Size - Speaker Connection: Terminal Block, Screw Type - Speaker Wire Compatibility: Up to 14-Gauge AWG - 100 Watt Power Load Handling - Depth 2.5''.
- EASY TO INSTALL: The Pyle in-wall indoor outdoor stereo volume control installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier to your speakers
- VERTICAL SLIDING OPERATION: The smart speaker controller features a convenient and simple multi-position sliding soft-touch vertical sliding volume control which makes volume adjustments a breeze. Suitable companion for Hi-Fi 4 pair speaker selector
- OPERATION: Set the amplifier's volume control to minimum. Turn on the amp and set its volume control slightly above the normal listening level. To increase/decrease the remote speaker's volume slide the inwall volume control upward or downwards
- UNIVERSAL COMPATIBILITY: The speaker volume control fader selector is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. It also features up to 100 watts load handling power
- STANDARD SIZE: It features a universal standard wall plate size. The included decora-style wall mount plate frame cover means this controller will unobtrusively blend into your wall and allows for a clean installation on your walls
User questions & answers
| Question: | Could I use this to control volume for one set of speakers wired (two pairs wired) to a Sonos connect amp |
| Answer: | They seem that they work fine. Yiu will just different srews then the ones they provide . |
| Question: | What is the “default” position for the ohms switch? There is no documentation that shows what each switch position corresponds to |
| Answer: | 13.5" x 2.5" |
Professional 5-Zone Stereo Speaker Distribution Controller with Volume Controls
Product description
Dual-Source Multi-Zone Speaker Switch Selector
This 5-zone stereo speaker distribution system helps route the music or audio signals from 2 amplifiers or home A/V receivers among 5 pairs of regular or loud speakers and one headphone connected.
End users can also benefit from this premium speaker controller as it provides constant protection of the amplification source and the remote speaker pairs against excessive power overload.
Users can easily control which speaker pair to be used for performance from a specific amp/receiver source using the push buttons on the front panel.
Cross Switching Between Amp/Receiver And Speakers
This unit provides total 5 of A/B source selectors for each speaker zone output. Users can select receiver/amp B to be played through speaker zone #1, #2 and #3 and speaker pair #4 and #5 are reserved for performance from receiver/amp A.
Speaker Zone Expansion
This advanced speaker distribution controller helps user easily expand the speaker capacity for their existing receiver or amplifier to handle more pairs of speakers.
Protection For Amplifiers And Speakers
This device is featured with advanced protection circuit built in to ensure safe load to the amplifiers/receivers connected. It provides 2-way protection for all the devices connected, protecting the amplifier connected and the speaker pairs connected from excessive power overloads and wears.
Independent Volume Control For All Speaker Zones
Each speaker zone has its own volume control dial on the front panel combined with master on/off switch design for turning on or off all outputs to all speakers.
Headphone Port
This switch also provides a stereo headphone port for private listening or volume/signal monitoring purpose.
- Premium multi-zone stereo speaker distribution controller to drive up to 5 pairs of speakers from one amplifier or two. Easily expand the speaker capacity for the existing receiver or amplifier to handle more pairs of speakers. Professional audio distribution controller for one or two amplifiers/receivers distributing music through multiple speaker pairs and headphone connected for further broadcasting and performance.
- Individual A/B source selector switches for each zone. Users can easily assign either one of the two amp/receiver sources to be played through the specific speaker zone using the A/B switch buttons on the front panel. Independent volume controls for each speaker zone output and headphone output. Playing audio on any selected speaker pair at different volume levels as desired. Maximize the performance and power provided from the setup with protection provided for the amp and loud speakers used.
- Advanced protection circuit built in to ensure safe load to the amplifiers/receivers connected. One headphone port for private listening or volume/signal monitoring purpose. Supports mixture of stereo speakers with impedance from 4 to 16 ohms. Master On/Off switch control for turning on or off all outputs instantly. Highly efficient transformer-based design with automatic amplifier impedance protection.
- Extremely low power loss in each zone when all five controls are set to maximum volume. Convenient snap push terminals that accept up to 12 AWG speaker wire. Full compatibility with all types of amplifiers and loudspeakers. 100W power handling per channel with 8 ohms speaker load. Robust, deluxe steel metal housing and well-shielded.
- Robust, deluxe steel metal housing and well-shielded. Dimension: 404mm (L) x 164mm (W)x 50mm (H) or 16"(L) x 6.5"(W) x 2"(H).
User questions & answers
| Question: | Is there any way to adjust volume remotely (ie in the zones |
| Answer: | Dear Valued Customer,Thank you for contacting Rosewill. We humbly apologize for the inconvenience this may have caused you. Please kindly try the follow;1. Power down both computers2. Disconnect the KVM and all of its associated cables from the computers3. Wait 30 seconds.4. Reconnect the KVM and all of its associated cables to the computers5. Power on both computers6. Test the deviceIf this does not help, please contact us directly for further assistance. Sincerely,Rosewill Support Service |
| Question: | Is the wattage on output relatively the same as input (100 in/~100 out) or closer to divided by 5 (200 in 40 per |
| Answer: | I doesn't use drivers so it works on any computer that recognizes a USB mouse and keyboard. |
| Question: | Would this work with vintage stereo receivers |
| Answer: | No, just the pushbutton switch. You have to go through the cycle of 4 clicks to get back to the same computer even if there are only 2 or 3 being used. I still like the switch and use it every day. |
| Question: | Does this unit need to be plugged in / require power |
| Answer: | Must be a mistake. There is no HDMI |
MICTUNING LS083601JL Laser Stereo Rocker Switch Kit, On/Off LED Light, 20A 12V, Blue
MICTUNING
Product description
Fashion Cool Illuminated Rocker Switch
MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!
It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4x4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.
Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2" (50mm) x 1"(25mm). Standard size mounting hole 1.41"(36mm) x .86"(22mm).
Warranty
1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.
Package included :
1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram
- MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
- PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
- STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
- WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc
- WHAT YOU'LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram
User questions & answers
| Question: | Does the light stay on when powered off? Dont want it to drain my battery |
| Answer: | It's likely that either the connection diagram (rear of the package) isn't being followed correctly (each amplifier channel and speaker connects to a VERTICALLY ORIENTED terminal pair, not to terminals located horizontally adjacent), or that one or more of the speakers being connected is sick. If the latter, try adding and testing one pair at a time until the problem appears; at that point you've found the culprit. Some modern surround systems have little tolerance for speakers other than the type and number supplied; we've heard some reports of this behavior triggered simply because 4Ω were substituted for the original 8Ω speakers... |
| Question: | Is this water proof |
| Answer: | Yes, as well as any other combination. Bear in mind that as you split the signal up between more and more pairs, you send you send a smaller percentage of the available amplifier power to each, so the relative volume will drop. This is not a problem if you have a reasonable amount of power available and are looking to provide backround music levels to each room where pairs are located... |
| Question: | do I need a switch holder to hold this switch in place or does it come with tabs to hold its self I.n place |
| Answer: | The receiver I own has a second zone set of speaker connections (stereo - left and right). If your receiver has an extra set of speaker outputs for a second one, you would use those output terminals and connect them to the input side of the switch. |
| Question: | Can this swicth be wired to control 2 speakers? Power a single 12v switch like a relay but only control the 2 separate spks circuits individually |
| Answer: | Why not use2 Port HDMI KVM Switch HD Resolution Support Windows 2000/XP/Vista Linux and Mac This way no need to switch tV inputs |
Product features
MICTUNING Laser Stereo Rocker Switch Kit
- 20 AMP, 12Volt Single Pole Single Throw ON-OFF switch for bar lights led
- size: 49mm x 24mm x 49mm
- waterproof ( IP66), short circuit protection, overload protection and against polarity reversal protection
- Standard size for most switch holes in modern vehicles, boats
- There is jumper wire coming with the switch for you to connect the switch to the wiring harness.
5-Zone Stereo Speaker Distribution Controller with Banana Plugs
Product description
Professional 5-Zone Stereo Speaker Distribution Controller
This premium multi-zone stereo speaker distribution controller system helps distribute the audio signals from 2 amplifiers or home A/V receivers among 5 pairs of regular or loud speakers and one headphone connected.
Users can easily control which speaker pair to be used for performance from a specific amp/receiver source using the push buttons on the front panel.
This system also provides constant protection of the amplification source and the remote speaker pairs against excessive power overload.
Speaker Zone Expansion
This advanced speaker distribution controller helps user easily expand the speaker capacity for their existing receiver or amplifier to handle more pairs of speakers.
Cross Switching Between Amp/Receiver And Speakers
This unit provides total 5 of A/B source selectors for each speaker zone output. Users can select receiver/amp B to be played through speaker zone #1, #2 and #3 and speaker pair #4 and #5 are reserved for performance from receiver/amp A.
Independent Volume Control For All Speaker Zones
Each speaker zone has its own volume control dial on the front panel combined with master on/off switch design for turning on or off all outputs to all speakers.
Protection For Amplifiers And Speakers
This device is featured with advanced protection circuit built in to ensure safe load to the amplifiers/receivers connected. It provides 2-way protection for all the devices connected, protecting the amplifier connected and the speaker pairs connected from excessive power overloads and wears.
Headphone Port
This switch also provides a stereo headphone port for private listening or volume/signal monitoring purpose.
- Premium multi-zone stereo speaker distribution controller to drive up to 5 pairs of speakers from one amplifier or two. Easily expand the speaker capacity for the existing receiver or amplifier to handle more pairs of speakers. Professional audio distribution controller for one or two amplifiers/receivers distributing music through multiple speaker pairs and headphone connected for further broadcasting and performance.
- Individual A/B source selector switches for each zone. Users can easily assign either one of the two amp/receiver sources to be played through the specific speaker zone using the A/B switch buttons on the front panel. Independent volume controls for each speaker zone output and headphone output. Playing audio on any selected speaker pair at different volume levels as desired. Maximize the performance and power provided from the setup with protection provided for the amp and loud speakers used.
- Advanced protection circuit built in to ensure safe load to the amplifiers/receivers connected. One headphone port for private listening or volume/signal monitoring purpose. Supports mixture of stereo speakers with impedance from 4 to 16 ohms. Master On/Off switch control for turning on or off all outputs instantly.
- Highly efficient transformer-based design with automatic amplifier impedance protection. Separate left and right ground paths for compatibility with all amps. Extremely low power loss in each zone when all five controls are set to maximum volume. Built with gold-plated banana sockets for low loss hassle free speaker termination.
- Accept up to 12 AWG speaker wire. Full compatibility with all types of amplifiers and loudspeakers. 100W power handling per channel with 8 ohms speaker load. Robust, deluxe steel metal housing and well-shielded. Dimension: 404mm (L) x 164mm (W)x 50mm (H) or 16"(L) x 6.5"(W) x 2"(H).
User questions & answers
| Question: | What is the power handling in watts rms per channel |
| Answer: | You can only switch between one or another. If you need two outputs going to speakers at the same time, look at mixers. |
| Question: | Can I connect both 1 preamp and 1 amplifier (300 watts - 4 ohms, 150 watts 8 ohms) to this |
| Answer: | Not when simply switching using the buttons. |
| Question: | does the load that it provides protect a tube amplifier while using only the headphones |
| Answer: | This switch has integrated into my setup without any noticable degradation of sound quality. I have been using it to switch the input to an amp between a TV and a Chromecast audio. |
| Question: | What are the dimensions of this unit |
| Answer: | Unfortunately not as the auto impedance protecting circuitry would be compromised. |
Latest Reviews
View all
Red Yeast Rice For Cooking
- Updated: 30.05.2023
- Read reviews
Ceramic Space Heaters
- Updated: 16.04.2023
- Read reviews
Samsonite Luggage Straps
- Updated: 25.01.2023
- Read reviews
Internet Boosters
- Updated: 09.05.2023
- Read reviews
Broan Trash Bags
- Updated: 06.03.2023
- Read reviews