11 best receiver remotes

• SECURE # Rolling code key fob device offers better security and far more code combinations (more than 18 quintillion - 18 x 10^18 possibilities, nearly a trillion more than typical fixed code or so-called learning code ones) and built on new platform using higher RF sensitivity -113dBm superheterodyne module for better long range and more stable performance.
• EASY & FLEXIBLE # Two independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse / momentary, hold / toggle and latching mode.
• ENCLOSURE # Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, while customer can also use chemical glue or epoxy adhesive to seal the wiring holes after setup, providing IP55 equivalent waterproof protection level. Mounting holes are provided for easy installation to walls etc using screws.
• INTERFACE # 3-Level efficient switching power supply system. Our 202U receiver board accepts 12 volts - 24 volts AC or DC wide supply voltage range (min. current rating is 110mA@12V DC). Each relay can switch up to 10A @14V DC or 10A @125V AC for resistive load (6A @14VDC for inductive load). Built-in small DC motor / solenoid polarity reversing control capability by using interlock latching mode and both relays.
• APPLICATIONS # Used in anti-theft alarm control panels, home automation systems, short and long range turn devices on / off wirelessly, lifts, boats, marine, winches, motor-driven curtain, roller blinds, overhead garage door & gate barriers, motorcycles, vehicles, cars, truck, industrial and agricultural electrical control such as water pumps & sprayer, electric door release locks, windows, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc.

User questions & answers

Question:	Do you guys have a remote with one or two button only? I use this unit with a door buzzer lock system and only need to open and close or “NC
Answer:	According to this document, yes (see link). https://www.google.com/search?q=is+the+Skylink+69+Universal+Garage+Door+Remote+Control+multi-code&ie=utf-8&oe=utf-8
Question:	Can you program multiple receivers to the same transmitter so button A will trigger multiple receivers at the same time
Answer:	I purchased the Visor Clip model for my 1999 Craftsman opener and it works. I do have to be next to and in front of the garage door to get the signal to capture. I am not sure if it is my Craftsman unit or the opener, I have two and they both require this, but it is not a big deal to me. I am pleased with the product.
Question:	I plan to install the reciever inside my pickup truck door. Will the signal from the remotes get through to the the reciever
Answer:	I am not sure. Best bet is to contact Skylink support for help. I hope tjis helps. Bob
Question:	What is the max range or distance that these remotes can work from
Answer:	As with most aftermarket openers, it will work with many LiftMaster models, mine included, but it won't work with all of them...and setup can be tedious.

Product features

Security - Abundant Code Combinations for Daily Use

Our rolling code system offers better security and far more code combinations than many other products at comparable price, which still uses 'ages old' fixed code or learning code due to much lower cost.

For Where Security Matters

While there is nothing wrong with fixed code or learning code in hobby projects, you may not want to use it in real life applications such as garage door opener, entry systems etc. where security matters.

Abundant Code Combinations

Our RF system has more than 18 quintillion (18 x 10^18) possible codes, nearly a trillion more than typical fixed code or learning code ones.

How big is a trillion? Let's take sand for example, if learning code's code pool is the size of an average sand, then our transmitter's code pool is bigger than dozens of standard football playgrounds. YES indeed that huge difference.

Performance - Carefully Designed and Manufactured

Range is one of the most popular questions customers ask regarding wireless products, you need better range and more stable performance, we heard you.

Increase Transmitter Power vs. Better Sensitivity Receiver

Unlike many other products which improve range by simply increase transmit power (while it works, it is not the right way). Our transmitter is designed with standards conformance in mind, we achieved better range, done right, by using better sensitivity receiver instead.

Better Superheteodyne RF Module

Unlike many others who just source RF module from outside, we designed our own instead, because we know it is crucial to RF performance. Every SolidAdvantage module is carefully designed by engineer and quality checked using state-of-the-art Rohde & Schwarz RF instrument before final assembly.

This is to make sure every RF receiver module actually achieve -111dBm sensitivity (lower value means better performance) and better stability in the long run.

• Excellent Anti-interference - DSSS&FHSS communication technology makes AT9S Pro transmitter with stable transmission signal and the control range up to 2.1 miles(3.4km) in air. Only 3ms' low latency response on all channels due to the Anti-interference's strengthen.
• Features: 10/12 channels/ Real-time telemetry(work with PRM-03)/ Low Consumption(90mA's operating current)/ Friendly system/ Reverse Polarity Protection/ Multiple Battery Options/ Programmable Mix Control/ Compatible with TBS Crossfire Protocol, perfect for beginner and expert.
• MCU - STM32F103VET6(32-bit ARM 72MH Clock Speed, 512K Flash capacity), Wireless chip-TI CC2533, QPSK modulation, Noble potentiometer, that makes sure AT9S Pro with stable transmission signal and outstanding control range.
• Adapts to Most of Aircrafts: No need to plug and any radio sets when they are binding, press the bind button over 1 second on receiver R12DS, R12DSM, R9DS, R6DS, R6DSM. 15 models storage and quicks to switch models on the menu: helicopter, quadcopter, fixed wing, glider, cars, boats.
• Safety Remind - low voltage alarm, RSSI alert, motor cut, fail-safe protection, etc. With DD sounds, vibration, and words alarming display on the LCD screen to remind when you are in noisy surroundings.

User questions & answers

Question:	What comes in the box
Answer:	Dear sir, What You Get from the AT9S box: AT9S 10CH Transmitter x 1 R9DS Receiver x 1 Simple User Manual x 1 Lanyard x 1 Joystick return back accessory x 1
Question:	Will the r9ds receiver work the naza-m lite and readytosky 30a esc opto 2-6s? i am certain the receiver will program the esc..but will this work
Answer:	Yes, R9DS receiver which comes with AT9S support SBUS&PWM signals, could work with the naza-m lite and readytosky 30a esc opto 2-6s.
Question:	At9s pro with r9ds receiver & rc 30a electronicparts escs. with esc connected to ch3 it automatically goes into programming mode. is this normal
Answer:	Hi, the AT9S Pro and R9DS are no problem. You need to set Throttle reverse. Go to AT9S Pro Menu REVERSE to modify the 3 THRO to REV, re-power on your ESC.
Question:	Can you help me find the cables needed to use the RadioLink to the computer to use with Simulator
Answer:	just training cable off banggood

Product features

AT9S Pro RC Transmitter and Receiver

AT9S Pro 10/12 Channels Radio Overview

With DSSS&FHSS protocol, which makes AT9S Pro with excellent anti-interference ability.

Setting simplicity, real-time telemetry, USB upgrade firmware, programmable mix control, support TBS CROSSFIRE protocol, adapts to almost all of types models, fast response for all channels, control distance up to 2.1 miles(3.4km) (actual control distance is according to the local environment).

It's an excellent choice for Airplane, Helicopter, Glider, Multirotor, RC car&boat and more.

Real-time telemetry

AT9S Pro can give you real-time important information on the screen*, like battery voltage, speed, altitude, RSSI, flight mode, yaw, roll, pitch and distance, and more.

*Works with PRM-03 module and flight controller APM or Pixhawk, Mini PIX, Turbo Pix.

Reverse polarity protection

Reverse polarity protection circuit, do not worry about its damage even you insert the wrong polarity.

Universal JST (2 pin) connector is easily adapted for various batteries, such as AA battery*8 (Package include AA battery tray)*, LiPo, Li-ion, NiMH, and NiCad battery. ( Battery not included)

*Operating voltage: 7.4 to 18 volts.(2s-4s liPo battery), Low Voltage Remind can setup in Menu(PARAMETER). The dimension of battery tray: 4.6*1.4*1.3 in.

Update firmware easily

Update firmware gets the newest function through PC easily. Please read our user manual to get how to get the latest firmware.

*Not support update firmware through Macbook.

Package include R9DS 9/10CH Receiver

Support PWM/SBUS signal output and high voltage servo(4.8-10v), outstanding control range up to 2.1 miles.

Binding with AT9S Pro: press the Bind Button 1 second and release.

Change Signal: press the Bind Button twice within 1 second.

Make sure your AT9S Pro Menu SYSTEM—CH-SELECT: 10CH

• 【Excellent Anti-interference】: With pseudo random FHSS algorithm, which makes RC4GS with excellent anti-interference ability, control distance up to 1300 feet(400 meters).
• 【Built in Gyro】: Built-in gyro can keep the vehicle in a straight line, and Gyro sensitivity can be adjusted by transmitter's VR switch or STD, which fits for drifting and on-road cars.
• 【Powerful Function】: ABS, fail-safe, EPA, D/R, IDLUP, subsidiary ID(control multiple receivers separately)and more function. CH3-CH4 can be customized to VR and tact switch and all channels' fail-safe values can be set to any value as you need.
• 【Dual Programmable Mix Control】: Mix control can be programmed with any two channels and each channel can be customized. That's friendly for twin-engine vehicles, such as tanks, boats.
• 【Adapts to Most of Types Vehicles】: with 10 models storage and each model can be set up and named separately. It is suitable for RC rock crawler, monster truck, buggy, on/off-road RC car, etc.

User questions & answers

Question:	Is there a sound system on the radio or receiver?Im into competitive rc cars and don’t want sound effects,also looks like a very promising good radio
Answer:	Hi, there is no sounds effect you when you pull the throttle, steering or other channels switches, except when you press the Menu buttons, there is with D sounds, and the volume is small, will not affect you when you are in the competion. The receiver only with LED light, no sounds. By the way, this radio with Alaming system to protect your battery, if you do not want to turn on, you should go to the Menu ALARM to setting the value to less: the : RX(Receiver battery) , TX(radio's battery), EXT(vehicles battery) , RSSI (off), that would be no alarming.
Question:	Does it have a 3 position switch to control a winch
Answer:	If you need 3 position switch to control a winch, you need choosing the RC6GS 6CH Radio which have One push button switch / one knob switch and two three position switches，and the RC6GS have better control range could get 600m+. The 3 position switch RC6GS : B07DPNNTWT
Question:	Can this be set up to control two different rc cars? if so, how do i do that? do i need to purchase a second receiver
Answer:	First, you need two R6FG receivers, install them on two RC cars, and match the R6FG receiver and the RC4GS transmitter with a match code (long press the side match code button, the green button is always on). Second, if you need to set different parameters for the two RC cars, you need to press the Exit and Enter button at the same time to enter the menu, then set Mode1 and Mode2 for your two RC cars in the model selection in the second item, and Adjust the number you want. Third,After you control the RC car1, if you want to control the RC car2, just turn off the power of the RC car1, turn on the power of the car2, and only need to perform once match code operation between each R6FG and RC4GS.Of course, if you have different settings, switch Mode1 or Mode2. If you have any questions, you can contact us directly, we are happy to ask you to answer.
Question:	Can it be set so the knob adjusts drag brake on the fly? Rc6gs with quicrun
Answer:	Hi, it cannot set a knob adjust drag brake, there is cannot set up ESC by radio system menu.

Product features

RC4GS V2 4 Channels Contoller Full Features

RC4GS V2 Overview

RC4GS V2 RC car controller with good performance will enhance your driving experience.

Setting simplicity, dual steer mix control, real-time telemetry, fast response, update firmware, ABS and fail-safe, subsidiary ID. With FHSS pseudo random algorithm, which makes 4 channels RC4GS V2 with excellent anti-interference ability, control range over 1300 feet(400 meters). (actual control distance is according the local environment).

• RC4GS V2 can be works with: R7FG/R6FG/R6F/R4FGM/R4F

Included R6FG 6CH Gyro Receiver

Come with 2.4G 6CH receiver build-in gyro integrated and support high voltage servo.

Lightweight to suitable put in the your vehicle's receiver box. Adapts to most of types vehicles, like drifting, rc monster truck, rock crawler, tank, buggy, rc boat, etc.

• Bind to RC4GS V2: Press Bind button more than 1 second and release
• Enable Gyro or Normal mode : press the Bind Button 3 times within 1 second.
• Gyro Reverse Modify: Press the Bind Button twice within 1 second.

Real-time Information Telemetry

The telemetry feature can give you real-time information for reference, like vehicle's battery voltage( voltage information transmission up to 6S), RSSI, bind status and more.

• To support telemetry function, the RC4GS v2 needs update to V6.0.1, vehicle must be equipped with R7FG receiver.

Programmable Dual Steer Mix Control

Mix control can be programmed with any two channels and each channel can be customized. That's friendly for twin-engine vehicles, like 4 wheel steering car, tanks, boats.

• To support the Dual Mix control, the corresponding latest firmware needs to be update over v4.0.0

Powerful Capabilities

• With 10 models storage and each model can be set up and named separately. It is suitable for RC rock crawler, monster truck, buggy, on/off-road RC car, boat etc.
• Support ABS, EPA,THEXP,ATL,AUX-CH, CH1-CH4 Fail-safe can be set any values on Menu (F/S).

Support FPV Monitor Installation

Strap hook and FPV monitor holder hole more convenient for user. An aperture of FPV display holder: M6 thread (1/4 thread) (English screw)

Trigger Enhance

The strips on the trigger increase the touching friction, that's will be enhance the control ability of throttle.

Hook for lanyard

The hook for lanyard makes driver control more convenient and long drive more pleasant.

Superb Ergonomics

• The handle shape is more linear and handy with the ergonomic design. 224(H) x 175(W) x 116(L)mm (8.8''*6.8''*4.5'') and only weighs 0.32 kg (0.7lb), can be easily to hold.
• CH2-CH4 can be customized to VR, tact switch, user can personalize by changing SWA to SWD as needs.

USB Based Upgrades

• No need purchase new radio when we have new function, just need to download new firmware, connect the controller to PC via Android USB cable to update, only few minutes for complete update.
• latest firmware download on Radiolink official website
• Not support update firmware by Mac computers

Radiolink Voltage Protection System

• With reverse polarity protection circuit, do not worry about it damage even you insert wrong polarity.
• JST(2Pin)connector is easily adapted for various battery, such as: 6*AA batteries(included battery tray) or 2s-4s LiPo, Lithium battery.( Battery sold separately )
• Low Voltage Remind: set up in Menu (ALARM).

• STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for
• COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
• SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
• RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
• EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!

User questions & answers

Question:	Is this compatible with a tcl riki tv
Answer:	I am assuming you mean a TCL Roku TV correct? I just purchased this for mine and it works like a charm. With one caveat, if you power it with the USB from the TV, you have to manually turn the TV on to activate power to the USB. If you power it will and external USB power supply you will be able to turn the TV on and off. Also keep in mind the TV's IR receiver is on the bottom of the screen in the middle in a whitish plastic area below the screen.
Question:	Does the transmitter portion need to be directly over the device to be controlled, or can it be a few feet away in line of sight
Answer:	As long as in line of sight.
Question:	Which is the receiver and which is the emitter?? One is larger than the other
Answer:	The picture depicts from left to right the receiver, the emitter and the USB. The receiver is the larger one.
Question:	Where exactly do you put the emitter on the cable box? Only the volume and power are working on the remote
Answer:	I reviewed this item as junk; the emitter being the issue. You need to look through (use a flash lite) the (usually red) cover on the cable box and find its emitter. You then need to place the "all in one' emitter DIRECTLY over it. Good luck getting it to work.

Product description

Designed for both gated communities and commercial buildings, the new universal receiver and accompanying remote controls feature security+ 2.0tm technology. It utilizes a new, innovative and exclusive narrow band multi-frequency radio, which virtually eliminates radio interference, and eliminates customer call backs due to poor range performance.

• Compatible with 811LM, 813LM, and all MAX remote controls
• Expands to three channels: Channel 1 - 50 remotes, Channel 2 - 20 remotes, Channel 3 - 20 remotes
• Compact design fits most gate and commercial door operators
• Provides convenient access to gated communities, industrial facilities, and commercial sites all with a single transmitter solution
• Multiple remote control options available to provide secure access from the safety and convenience of a vehicle

User questions & answers

Question:	Is this compatible with my q
Answer:	Yes
Question:	Can i use this controller on a genie garage door opener? we just installed a liftmaster on the other door. it uses remote 893lm
Answer:	Yes I have a Huawei mate 20x so my phone is massive. I’m currently using the red one The bands stretch out pretty far and combined with the mount it holds the phone in place pretty well
Question:	Will this work on a power garage door with no remote, only interior push-buttons
Answer:	Yes. Its actually pretty sturdy. The elastic band holds the phone in place by the edges. I bought it for my daughter and to make videos and its held up so far.
Question:	FOR MANY REMOTES IS
Answer:	i do not know, it fit my i-phone 7 with otter box cover

• Two-way Communication: Real pseudo random algorithm FHSS communication technology makes RC6GS control distance up to 1900 feet (600meters), and over 40 units of RC6GS can work simultaneously at one place without any interference.
• 6 Channels: CH3-CH6 can be customized to VR, three-way switch and tact switch, the SWA can be used for Cruise Control mode, it helps the driver easily to control crawler go downhill. All channels' fail-safe values can be set to any value as you need.
• Real-time Telemetry and Gyro Function : This radio system can give you real-time important information like vehicle's battery voltage, RSSI signal and more. Receiver built-in gyro can keep the vehicle in a straight line, the gyro sensitivity can be adjusted by controller, which fits for drifting and on-road cars.
• Dual Programmable Mix Control: Any two channels can be mixed control and each channel can be customized. That's friendly for twin-engine vehicles, such as tanks, boats.
• Adapts to Most of Types Vehicles: with 10 models storage and each model can be set up and named separately, assigning 1 of 10 receiver to work separetely on menu ID SEED. It is suitable for RC rock crawler, monster truck, Baja, off-road RC car, etc.

User questions & answers

Question:	can it be switched for left handed drivers
Answer:	Unfortunately not I am a lefty too but it's still a great radio for the price
Question:	How do you toggle dual rates while running? Do you have to stop driving and go into the menu each time to make an adjustment
Answer:	Hi, yes, you should modify the dual rates on the Radio's menu before running.
Question:	Is this compatible with the traxxas x maxx
Answer:	Of course,RC6GS' unique dual mixing control also allows it to better control dual motor car
Question:	I’m new to the rc world, so where would you plug in the battery power to this receiver, would it be in one of the 3 aux channels
Answer:	Hi, you need to plug the ESC(electronic speed controller) in the receiver. Your battery power should plug in the ESC to keep the voltage.This R6FG receiver support 4.8--10v.

Product features

RC6GS V2 6 Channels Full Features

RC6GS V2 Overview

Setting simplicity, dual steer mix control, real-time information telemetry, cruise control, firmware update, ABS and fail-safe, subsidiary ID, and more powerful capabilities. The control distance up to 1900 feet (600 meters). (actual control distance is according the local environment).

It's a good idea for rc rock crawler, truck on/off road car.

• RC6GS V2 can be works with: R7FG/R6FG/R6F/R4FGM/R4F
• To get Full E-instruction and Latest Firmware on Radiolink website

Press to Bind

No need bind plug and any radio setting, only press bind button for 1 second to bind after power up radio and receiver.

• Change Gyro or Normal modes : press the Bind Button 3 times within 1 second.
• Gyro Reverse Modify: Press the Bind Button twice within 1 second.

Real-time Information Transmission

Vehicle's voltage telemetry feature can give you real-time important information, like vehicle's battery voltage, RSSI signal and more.

• Max Telemetry Voltage up to 6S.
• Telemetry port NOT support power supply to receiver.

Cruise Control for Crawler

It is difficult to control the throttle when crawler in downhill slope, the cruise control function to help driver easily to control RC crawler, one switch to keep the throttle speed.

• To support cruise control, the RC6GS/RC6GS v2 needs upgrade V6.1.2

Mix Steering Control

Mix steering control can be programmed with any two channels and each channel can be customized. That's friendly for twin-engine vehicles, such as 4 wheel steering car, tank, dual motor boat.

• To get setting tutorial on the user full manual

Support FPV Monitor Installation

• Strap hook and FPV monitor holder hole more convenient for user.
• An aperture of FPV display holder: M6 thread (1/4 thread) (English screw)

Trigger Control

The strips on the trigger increase the touching friction, that's will be enhance the control ability of throttle.

Hook for lanyard

Added a hook for lanyard, it makes driver control more convenient and not bulky.

Superb Ergonomics

• CH3-CH6 can be customized to VR, 2 of three-way switches and tact switch, the tact switch SWA can be used for cruise control mode.
• The handle shape is more linear and handy with the ergonomic design. (8.8(H) ''*6.9(L) ''*4.6(W)'') and only weighs 0.32 kg (11.3oz).

USB Update Firmware for Future Features

• No need purchase new radio when we have new function, just need to update latest firmware to add.
• latest firmware download on Radiolink official website or ask after-sales service.
• Not support update firmware by Mac computers

Radiolink Voltage Protection System

• RC6GS v2 controller with reverse polarity protection circuit, do not worry about it damage even you insert wrong polarity.
• JST(2Pin)connector is easily adapted for various battery, such as: 6*AA batteries(included battery tray) or 2s-4s LiPo, Lithium battery.( Battery sold separately )
• Low Voltage Remind: set up in Menu (ALARM).

Product description

Ceiling Fan Remote Control Kit approved by FCC

It has excellent carrying power, which far beyond the market's carrying power capacity, the superior rated power capacity carrying allows you to access more light bulbs, greatly increase the time of use.

Our products are regular original OEM products with reliable quality.



Set different DIP switch pattern if control multiple ceiling fans

If you control multiple ceiling fans in the house, please check the DIP switch pattern settings are different between these, or it may let transmitter next door or your neibourhood's remote activates this ceiling fan in your other rooms. This may cause the fan turning on strangely while you are not at home.



REMINDER:

1. Please set a new DIP switch pattern for the remote control and receiver before installing the receiver. They have a default pattern, do not use this pattern. To choose a DIP switch pattern you like, just make sure that the DIP switch pattern of the remote control is the same as the DIP switch pattern of the receiver. The list of patterns: (0 is down and 1 is up) 0000, 0001, 0010, 0100, 0110, 0101, 0011, 0111, 1111, 1110, 1101, 1011, 1001, 1010, 1100, 1000

2. If you have PULL CHAINS SWITCH, before using the wireless remote control, use the PULL CHAINS SWITCH to turn the wind speed to maximum and turn the fan light on. Only in this way can the PULL CHAINS SWITCH and wireless remote control be used together.



Specification

Input voltage: 100-140V

AC Frequency: 50/60Hz

Require Battery: 9V battery (not included)

Properties of Lights in Controller: Relay contact on/off

Transmission Mode: Radio Frequency (RF)

Radio Frequency Band: 303.9MHz

Remote Control Range: 50 ft



Package Includes (9V battery is not included)

1* Remote Control

1* Receiver

6* Wire nuts

1* Wall mount

2* Screw

1* Paper description

• This universal Ceiling Fan Remote Control kit is specifically made for Hampton Bay and Harbor Breeze fans,hunter etc,but works with 95% AC motor ceiling fans. It has excellent carrying voltage. It is manufactured by the original OEM and approved by FCC.
• This remote control controls the 3-speeds of your ceiling fan (low, medium, high), The Light on/off, Dimming. It cannot reverse the ceiling fan. If your light is LED, then it can only control the light on/off but not dimming. Respond quickly, taking less than half a second.
• This receiver has 5 wires (except the antenna) and each wire is marked with its function as shown in the picture. Make sure original receiver has only 5 wires (except the antenna) or you know which of the 6 wires to ignore. Please observe and roughly understand the function of each wire on original receiver.
• There are installation steps and installation diagrams on the paper description (In the package). It can help you quickly install. In the past, the manufacturer of this remote control provided a large number of remote controls and technical support for many well-known brand ceiling fans. Its quality and performance are reliable.
• We are very willing to provide customers with 100% satisfactory service. Whenever you have any questions, our customer service will answer them for you. We provide our customers with 24/7 service.

User questions & answers

Question:	Will this work with Hunter Oakhurst Model
Answer:	Personally I think it will work for master / slave as you said 2 or more motors / ESC's, if you use just one channel for the motor / esc connection; or if you need more channel to control the motors / esc's, you can choose gt5 radio controller with bs6 receiver, which provide 6 channels for rc car configuration. https://www.amazon.com/dp/B08NH4KM2G
Question:	What is the measurements of the receiver
Answer:	It is only suitable for 12V gasoline cars.
Question:	Will this unit work on my Harbor Breeze fan that did not originally come with a remote control
Answer:	this reader is best for reading engine codes "check engine light", depending on the app you use it can read ABS codes. i have been able to read SRS on mine but it seems hit or miss for airbag codes, may be hardware related or due to the apps used i am not sure which. This reader also works well with fords through forscan
Question:	Will this work with minka aire model f529? (this model does already have a hand held remote. ) thank you
Answer:	Hello, this is version 2.1.

Product description

The maximum light carrying power is 240W, which supports ceiling fans with multiple bulbs. Multiple inspection procedures make it safer. Even if you don't have any electrician knowledge, you can complete the installation according to the product manual in the package.

REMINDER

Please install a new battery for the transmitter before use.

After-sales Service

:) If you have any questions during use, please contact us. We are proud to offer 24/7 service to all our customers. We wish you a happy shopping!

• BAYICON Universal Ceiling Fan Remote Control Kit with Original OEM, FCC approved.
• Specially made for Hampton Bay Harbor Breeze Hunter ceiling fans, but works with almost all regular ceiling fans.
• Control the 3-speeds of the ceiling fan (low, medium, high), the light on/off, dimming.
• It uses a 12V battery, but the battery is not included. This is a kit, including the receiver.
• The response speed is very fast, it takes less than half a second.

• FLY SKY RC FLYSKY FS-GT2B Radio Controller / Radio Transmitter with FS-GR3E Failsafe Receiver. 10 Models memory (non simultaneously).
• The GT2B transmitter is setup for right handed use and allows quick changes to the steering and throttle trim dials, along with steering and throttle channel reversing and very useful steering dual rate dial at the tip of your fingertips.
• The steering wheel has great response with the perfect amount of resistance and spring back to center perfectly. A rubber grip around the wheel ensure your fingers do not slip if they are covered in dirt or oil.
• The pistol grip is also interchangeable with a fatter palm swell to accommodate larger hands.
• The Radio is powered by a 800mah 3.7v lithium battery for enhanced runtime and lighter weight.

User questions & answers

Question:	Can I use two of these on separate vehicles at the same time
Answer:	Mine roll. Mostly because of my gut.
Question:	Is the receiver water proof
Answer:	Nope. Turns out what you had is what you got. ;) (But also, in my experience, these do not provide any 'lift' like a push up bra would, but for your man stuff.)
Question:	Will this fit 2013 Acura TL
Answer:	I believe these are the last and only of comfort blend I ordered on Amazon might be the only place to get them now, the stores that say that have it rarely ever have all the sizes.
Question:	Hi, will this unit fit a 2013 toyota altitude prado 3l td 150 series
Answer:	Right next to the Long Leg box is a Standard box which is the standard size.

Product features

FLYSKY RC FS-GT2B Rc Car Remote Controller Radio Controller & FS-GR3E Failsafe Receiver, with Rechargeable Transmitter Battery, USB Charger

Features:

• Reliable, interference free 2.4GHz AFHDS signal operation

• 3CH operation

• Rechargeable li-ion transmitter battery

• Interchangeable rubber hand grips

• Adjustable steering dual-rate

• Servo reversing

Transmitter Specs:

RF Power: 20dBm (100mW) max

System Type: AFHDS

Sensitivity: 1024

Low Voltage Warning: Yes

Charge Port: Yes (USB- charge cable included)

Power: 3.7V 800mAh li-ion (included)

Flysky FS-GR3E Receiver Specification

Receiver Specs:

RF Receiver Sensitivity: -105dBm

System Type: AFHDS

Sensitivity: 1024

Failsafe: Yes

Power Port: Yes (VCC)

Power: 4.5~6.5 VDC

Weight: 5g

Dimensions: 37.6 x 22.3 x 13mm

Bind GT2B radio transmitter & GR3E Receiver, Calibrate an ESC

- Bind GT2B radio transmitter & GR3E Receiver

1.Insert the bind plug into channel three (VCC/BIND) port of the receiver, and turn the car on. The red LED should now be flashing continuously, indicating the receiver is in binding mode

2. Press and hold the bind button on your controller and switch it on.

The bind button on the FlySly GT2B is recessed. A pen, or even a body clip to press the bind button to avoid frustration.

The green led on the controller will flash, indicating that it is in bind mode. The LED on the receiver will now change to solid red, indicating that the bind was successful.

3: Turn the car and controller off, and remove the bind plug.

That’s it! Turn everything back on (always the controller first, then the car) and you’re ready to go race!

- Calibrate an ESC

The first step is to make sure your controller is turned on, with the throttle trim dial set to 0.

With the controller turned on and ready to go, hold down the set button next to the ESC’s power switch, then turn it on. The ESC will start beeping at you to let you know that it is in programming mode. Release the set button.

Making sure that the hand controller is sitting with its trigger in the neutral position, press the programming button again and you’ll hear a single beep. You just told the ESC where neutral is. Now, pull the trigger all the way towards you, as if you are accelerating in a drag race going full throttle. Press the set button again and the ESC will beep twice to let you know it has learned that this trigger position is full throttle. Lastly, push the trigger all the way away, like you’re hard on the brakes. Pressing the set button one more time will make it beep three times, setting maximum brake/reverse point.

Now by releasing the trigger altogether, the ESC will make one long beep and the entire throttle range has been set correctly

Internal rechargeable GT2B Transmitter Battery, USB charge port

Product description

Specification:

Brand: DUMBORC

Item No.: X6(transmitter), X6FG(receiver WITH GYRO)

Feature:

1. Gun style remote controller: Realize one-handed control, easy to operate without difficulty.

2. 2.4GHZ transmission: Anti-interference, remote control distance can reach 500 meters.

3. Three power supply modes: 1.5V A * 4 Dry Battery / USB Power Port / Lithium Battery Socket (any interface form of any lithium battery, as long as the battery size and interface size are applicable).

4. Low power alarm of remote controller: When the remote controller is predicted to be disconnected from the cars/boats/tanks, the remote controller can be driven back safely in advance, thus effectively avoiding the trouble of product loss or salvage.

5. Throttle direction / steering direction can be switched: The direction of throttle and steering control can be switched according to the usage habits of users, thus being more suitable for people.

6. Throttle sensitivity fine adjustment of motor differential speed.

7. Forward, back and steering proportional speed change: Realize different needs and experiences of sailing speed.





You can bougth it together from our store

DUMBORC LED Light system kit:ASIN:B08V13G2S9/B08V15SF9Q

DUMBORC LED flashing lights:ASIN:B08V934SYS /B08V91V7DQ

DUMBORC LED Multiple-Color Switching Running lamp:ASIN:B08VWC1WM3

DUMBORC LED simulation lights receiver :ASIN:B08VW8LZZG /B08VW288DF

• Used For :DUMBORC X6 Transmitter perfect used for RC Car Boat Tank model,2.4GHz Frequency and 3ms Receiver responses. Stable control your model 400-500M, make good works and protect when it out of control
•  Low Power Alarm / Three Power Charging Modes of Remote Controller : This is a good fuctions for buyers ，when the transmitter lower power，low voltage warning: 7.4V/4.8V,It can effectively protect your battery. and it's very convenient for buyer , it contains 3 modes for charging :1.5V A * 4 Dry Battery / USB Power Port / Lithium Battery Socket.
• Mixed Model Can Be Used:Each of 3 channels can be set respectively, supporting mixed control of 1 and 2 channels. It's a great feature for DIY Models,Support gyro sensitivity adjustment.
• Unique Throttle Speed Limit Adjustment Function:suitable for beginners practice in a safe speed.Package: 1 x Remote Controller 1 x Reciver with Gyro function 1 x User Manual
• After-sales：TIPS: When the throttle doesn't work in reverse, pls check if it is full charge , try to reprograming and check your ESC ,it must be two-way ESC. Pls check the "sub-trim for steering/Throttle" at 0 and "EPA for steering /Throttle" at 80. Please Note: Our packaging has been updated. Please don't worry if you receive different color box.Please feel free to contact us any troubles.

User questions & answers

Question:	I want to use a rechargeable battery pack because this goes through AAs quickly. What kind of connector is on the side of the battery compartment
Answer:	These are regular rise. I do like the separate pouch that your penis fits into. Size: I am 34inch waist. I think I bought XL. I checked but I had cut the size tags off.
Question:	Can i put 7.4 volts through the receiver for my servo
Answer:	These underwear do not have the typical fly you see in men's underwear. There is an opening between the area for "the boys" and the separate front pouch that is like a fly. It is discreetly placed and does not look like there is an opening when worn.
Question:	is it easy to install the esc? I mean can you just plug the wires in or do they go in a certain order
Answer:	Super gentle, I exclusively wear these now.
Question:	What does a slow flashing blue/light blue led mean? the batteries are brand new
Answer:	It should be able to hold those ballas and ding dong nicely, could always put them on the inside like regular underwear. I say large to extra large would be a good size. Im 34w and think a xlarge would fit me better even though i ordered large. If you have a little belly like me its annoying when you feel the elastic do the roll under the fat lol, just my opinion.

• 【Upgrade Stereo Receiver with TI chip】 Compact D-class RMS 2x 40W amplifier & receiver, adopts Texas Instruments(TI) chip, be able to hook up with bookshelf speakers or other passive speakers (6-8 ohm speakers are recommended) , Perfect for HiFi music purpose and home audio entertainment, Creative sleep timer function makes your amplifier unique & more convenient.
• 【Strong Compatibility & Practicability 】 Works with all devices which is with an analog or digital output (up to 16bit/44.1KHz) via Optical/SPDIF/RCA/AUX cable. it also supports various resources including 1/4” wired microphone, USB flash drive. Adjustable L/R balance & EQ option: Country/Pop/Jazz/Rock/Classic/Normal.
• 【Bluetooth 5.0 】 With additional Bluetooth antenna, you can connect any Bluetooth enabled devices up to 65 ft in flat area. Stream wireless music in every corner stably and lossless.
• 【Knobs Operation & Remote Control 】 Customize the sound output according to your request. Rotate knobs to control MIC Volume, ECHO, Balance, Bass, Treble, Master Volume, digital LED display ensures all operations clearly, Additional remote control makes it more convenient.
• 【5-Level Safety Protections 】 The built-in 5-level protection (overload protection, over-voltage protection, over-current protection, short protection, self-protection) makes both amplifier and your speakers more safer. 1-year warranty with new replacement in case of any fault or quality issues.

User questions & answers

Question:	Can I select song to be played from usb using the remote. i.e. song #35, song
Answer:	Hi, Of course you can select song to play from USB via remote, just shift receiver to USB mode, and press the number key on remote, and it will play sony you select. Best regards.
Question:	Can I connect both a turntable and a tapedeck recorder at the same time? Plus speakers
Answer:	Hi, I think it can be connect both a turntable and a recorder, There are Line-in input/3.5mm input and a recorder/audio output for connecting other device,but if you want to connect it with a turntable, maybe it needs pre-amp, also there are speaker connectors for connecting speaker, If you want to know more details, please contace us via email: [email protected], we will response it within 12 hours. Best regards.
Question:	Earlier, i asked about the spkr connection type...please delete the question. i now see they are spring terminals. thanks
Answer:	Spring terminals are simple, you just push down on tab to open and insert cable let go
Question:	Can it be connected to a wireless Bluetooth speaker
Answer:	There is audio output. so you can connect your Bluetooth speaker via its audio cord. But you can not connect with your Bluetooth speaker wirelessly , as it has only built-in Bluetooth receiver ,It can not transmit Bluetooth.

Product features

2020 upgrade design

• Less power loss & less heat
• Light weight & Mini size

Wireless Technologies

• Wireless Bluetooth connection with lossless trasmission
• Latest Bluetooth 5.0 works with all of latest samart devices

More Advanced Features

• 30-180 minutes Sleep Timer
• Romote control
• 5-level protections keep your external devices safer
• Adjustable L/R balance & 6-EQ options.

Bluetooth 5.0

• Stable & lossless connection
• Up to 65 ft connection distance
• External Bluetooth antenna

Digital & Analog Outputs

• Digital output : Optical & S/PDIF
• Analog output : RCA (red and white)
• 3.5mm subwoofer audio output for connecting with an active subwoofer, makes it a 2.1 stereo system

USB/AUX

• USB flash driver supports lossless music
• AUX/MP3 for all devices
• Folder +/- and multi repeat modes playback

Suits for Various Application

• Perfects for home audio entertainment
• Stream background music wirelessly
• Conference or speech with wired microphone
• Relax with Hi-Fi external speakers