4 best acoustic audio home amplifiers

Product description

Acoustic Audio by Goldwood amp for an in wall subwoofer includes LFE and RCA inputs, gain and crossover controls, and raw wire speaker outputs. This WS1005 works with almost all home audio receivers with subwoofer outputs and will deliver plenty of bang for the buck!

• To be used with Passive Subwoofers only ,In Wall or In Ceiling Home Entertainment,Home Theater Systems,Industrial Sound Systems ,Multiple Room Systems
• Power Amplifier Output: 200 Watts, Low Bass Frequency Response of 50 – 200 Hz +/- 3dB
• Output Impedance: 4-8 ohm. CL3 Rated in wall certified raw speaker wire to connect your amp to the speaker
• Sub volume and crossover control knobs
• LFE and RCA Inputs for use from a home audio receiver. Raw wire outputs.

User questions & answers

Question:	Hi, i am from australia, could i get the 220v drive for the amplifier
Answer:	This is an 18 volt amp! Rig a wall wart to go between it and your local mains.
Question:	Looking to power to aura bass shakers will this work? And do I have to run them in series? What should the crossover be set to
Answer:	Should work, wire speaker individually set at 4 ohms.
Question:	Will this amp power 4 aura bass shakers? 50w 4-ohm each. recommended wiring would also be appreciated. thanks
Answer:	I think you would need an amplifier for EACH Bass Shaker. This is mostly due to the fact that this amplifier isn't capable of producing 200w RMS, plus you are going to run into Impedance issues too. I'd probably just buy a used & completely separate (A CHEAP OLD MODEL) 5.1 reciever. Then put it in "5 Channel Stereo Mode", & run individual RCA inputs, & speaker wires to EACH channel in question. Obviously making sure the amp makes enough power to run the Bass Shakers. Does that make sense?
Question:	How come it claims to have 200w but in input power is only 40w (18v * 2.2 A
Answer:	Chelsie missed the intent of the question. Yes the input power is 40W and I think the person asking the question knows that. The question was how can it produce 200w of output power from 40W of input power. The answer is that the 200W ratings given are dishonest and violate longstanding US FTC regulations that requires that audio amplifier output be advertised as RMS watts into a given impedance (typically 4 or 8 ohms). What is being quoted here is instantaneous peak power which is NOT RMS power. The steady state continuous duty RMS output power of this amplifier is probably on the order of 10 to 15 watts per channel with the rest lost to heat. Save your money and look elsewhere. This unit can't create energy out of thin air.

Product features

Front Panel Controls

Easy On/ Off Power Button.

LED Power Indicator Light.

Built In Crossover Network and Subwoofer Volume Controls.

Back Panel Inputs/Outputs

RCA Inputs (L, R) with LFE Option.

Quick Release Spring Loaded Raw Wire Outputs.

Replacement Fuse.

AC Power Input.

Connections

Easily connect.

Passive Subwoofer with Raw Speaker Wire.

Receiver with RCA Cable & Y Splitter.

Whats Included

AC Power Adapter.

Y Splitter (for RCA).

RCA Cable.

Acoustic Audio by Goldwood WS1005 200 Watt Passive Subwoofer Amplifier

The WS1005 is a compact and discrete yet powerful addition to your home theater system. Since in wall subwoofers are mostly passive, they require external power to function. This subwoofer amplifier provides the power required to take your sub's low frequency effects to the next level. At an unbeatable price, the WS1005 bypasses the competition by supplying 200 Watts and a built-in crossover network designed specifically for passive subwoofers allowing you to tighten the level of bass signal going to the subwoofer. In search of an affordable, dynamic solution for broadening your home theater bass effects? Search no more.

Also shown here

Acoustic Audio HDS10 In Wall 300 Watt 10" Home Theater Passive Subwoofer.

Product description

Features: - 1/4'' Headphone Jack - 2 x 120 Watt Peak at 4-Ohm - Blue LED Display for Media Playback Information - Double Decoder Digital Media Function with Remote Control - Built-in USB/SD Memory Card Readers - Compatible with MP3/WMA Files - FM Radio - Bluetooth Receiver - Blue LED Output Level Indicators - Power On/Off Switch LED Indicator - Bass, Treble, Master and Volume Controls - RCA Cable L/R Input, Four Push Type Speaker L/R Terminals - Fuse for protection against Surges and Short Circuit - Connect More Audio/Computer Devices via 3.5mm to RCA Converter - Bluetooth external antenna - Bluetooth Network Name: ‘PyleUSA’ What’s In The Box: - Stereo Power Amplifier Technical Specs: - Battery Operated Remote, Requires x CR-2025 Button Cell Battery, Included - AUX Input Jack for iPod/iPhone/iPad/CD/MP3 Players: 3.5mm/1/8’’ - Compatible with Audio/Computer (Device MP3 Players) Via 3.5mm to RCA Converter - AC IN Power Cord - Connect to AC 110V/60Hz or 220V/50Hz - Frequency Response: 20Hz-20 kHz - Voltage Selector: 120/240V - Product Dimension ( L x W x H): 5.39’’ x 2.87’’ x 8.41’’ -inches

• 2 x 120 WATT POWER: The stereo receiver amplifier for home theater system gives you 2x120 watts power which can be used for multi speakers w/ 4 ohms for a high quality amplified audio. Perfect for home theater acoustic surround sound system
• 4 INPUTS: This home audio amplifier is equipped w/ AUX input jack for PC (CD ROM) laptop, walkman, iPod, and cellphone, SD/MMC, USB, and RCA for CD/DVD player, tape deck, tuner, camcorder or VCR. It also has a headphone jack and FM radio
• BLUETOOTH CONNECTIVITY: Pyle bluetooth stereo amplifier receiver is compatible with bluetooth w/ 30+ ft wireless range and works w/ today’s latest devices including smartphone, iPad, tablet, iPhone and laptop w/ hassle-free receiver pairing
• 110/220 VOLTAGE SELECTOR: The wireless speaker receiver home stereo amp has selectable input voltage from 110V/60Hz standard in USA & CANADA to 220V/50Hz for EUROPEAN. It also has a built-in short circuit and power surge protection
• FRONT CONTROL PANEL: This home speaker amplifier home audio bluetooth receiver features a front panel control center w/ LED indicator lights, bass/treble/volume rotary controls, & power switch. Has a double decoder digital media function w/ remote

• 100 Watts of Peak Power: The dual-pass Bluetooth stereo amplifier receiver is perfect for your karaoke, home theater and acoustic sound system. With enough powerful power amplification, you can easily accommodate 1 sets of speakers, enjoy the audio impact of high-quality audio amplification.
• Bluetooth: The sound amplification mixer device is equipped with Bluetooth music streaming with a wireless range of 40 feet / 12 meters or more. Equipped with today's latest devices (including smartphones, iPads, iPhones and computers), it is easy to pair with the receiver.
• Multiple Input & Output Modes: The digital amplifier box supports various external signal sources. 2 RCA audio inputs for tuner, CD player, tape drive, two 2.5-inch / 6.35 cm Microphone inputs, USB, SD card, FM radio antenna. With RCA audio output, 2 pairs speaker output. You can enjoy karaoke as much as you like.
• Easy to Control: This stereo amplifier has professional compact bookshelf sound amplifier and clear, responsive buttons for mode control. You can control the microphone echo / volume, bass, treble, master volume by adjusting the knobs.
• Remote Control: Equipped with a mini remote control, this amplifier is convenient for you to remotely control the machine at any angle and get rid of the shackles of wires.(Note: Please remove the remote battery insulating sheet when receive so it can work)

User questions & answers

Question:	Is this product's power adapter usage voltage 110-240 V
Answer:	Dear CHOI IL YONG,Yes, it is.
Question:	Does this ship in the actual product box or an amazon box
Answer:	Dear Cassie,Normally, there will be Amazon packaging boxes.For more information, we kindly suggest you consult Amazon who will assist you with shipping and package box questions. Here is Amazon customer service access entrance:https://www.amazon.com/gp/help/contact-us/general-questions.htmlhelp > Browse Help Topics > Need More Help? > contact us1). Use your Amazon account to log into www.amazon.com ;2). Pull down to the bottom of this page and find the "Help" button, and click on it to get into a new page3). Find "Need more help “in the middle of this page and move it to this button and you will see "Contact Us " and click on it. Then you will get in touch with Amazon Customer Service Associate in accordance with the actual situation.consumer hotlineU.S. and Canada: 1-866-216-1072 — International: 1-206-266-2992Hope it can help you.
Question:	How do you tune the radio
Answer:	Press the FM mode button to automatically search for all radio frequencies, which is convenient and simple.
Question:	I can’t figure out how to play my sd music card, really poor poor instructions, 3 pages long, give me a break, back to amazon
Answer:	We sincerely apologize for the inconvenience caused. However, you can insert an audio within 32G or less than 32G in MP3 format to use the amplifier.

Product features

A Karaoke amplifier for mini home/bistro

Although it's small and exquisite, its power amplifier has a peak power of 100W, which can drive 3-6.5 inches of speakers. In addition, there are functions such as reading USB, SD card, one-key search FM function, wireless connection audio and other functions. There are also 2 microphone ports, you can enjoy karaoke singing as much as you want

New Chip

Moukey Bluetooth amplifier uses the new AC6922A chip as a core product promotion, and optimizes the performance of the old product, such as sound quality, stability and strong 100W peak power.

One-key search FM function

In the FM state, press the play button to automatically search for all radio frequencies, which is convenient and simple.

Certified adapter

In order to ensure the performance of safety and sound quality, our company uses a certified adapter to ensure stable output of the product and uninterrupted karaoke.

Product description

Features: - Home Theater Pro Audio Receiver - High-Powered Hybrid Pre-Amplifier - Multi-Channel Source Audio Selection - Built-in Bluetooth for Wireless Music Streaming - Includes UHF Wireless Handheld Microphones - FM/AM Radio with Digital LCD Display - USB Flash & SD Memory Card Readers - MP3 Audio File Playback Support - Connect & Stream Audio from External Devices - Aux (3.5mm) Input Jack - 1/4’’ Microphone Inputs - Headphone Jack, 1/4’’ - RCA (L/R) Audio Input/Output Jacks - Dedicated for Subwoofer Output - Screw-Type Speaker Terminal Binding Posts - Front Panel Button & Rotary Control Center - Independent Audio Source Selection - LED Backlight Illumination with Dimmer Control - Microphone Volume/Echo Control - Integrated Overload & Short Circuitry Protection - Built-in Cooling Fan - Universal Rack Mount Design Bluetooth Connectivity: - Built-in Receiver for Wireless Audio Music Streaming - Simple & Hassle-Free Pairing - Works with All of Today’s Latest Devices - (Smartphones, Tablets, Laptops, Computers, etc.) - Bluetooth Version: 5.0 - Bluetooth Network Name: ‘PYLE PRO’ - Wireless Range: 40’+ ft. What’s in the Box: - Hybrid Pre-Amplifier - UHF Wireless Handheld Microphones - Detachable Rack-Mount Brackets - FM/AM Antenna/Bluetooth Antenna - Remote Control - Power Cable Technical Specs: - Power Output: 3000 Watt MAX - 900 Watt @ 2 Ohm - 450 Watt @ 4 Ohm - 300 Watt @ 8 Ohm - S/N Ratio: >76dB - T.H.D.: <1% - Radio Station Memory Presets: 30 - Digital Media File Playback Support: MP3/WMA/WAV/FLAC/APE - Maximum USB/SD Flash Memory Support: Up to 64GB - Battery Operated Remote, Requires x ‘AAA’ Batteries, Not Included - Battery Operated Mic, Requires x ‘AAA’ Batteries Each, Not Included - Power Cord Length: 4.5’ ft. - Power Supply: 130/230V, Switchable - Unit Dimensions (L x W x H): 19.0’’ x 12.0’’ x 3.1’’ –inches

• 3000-WATT POWER: The Pyle Multi-Channel Pre-Amplifier is perfect for your karaoke and home entertainment system. It gives you 3000W peak power to be used for multi speakers w/ 2-8 ohms impedance allowing you to enjoy high quality amplified audio
• 6 INPUTS: The digital amp box supports FM/AM radio, MP3 audio playback & other external devices. It is equipped w/ USB & SD card readers, AUX 3.5mm input, 2 ¼” mic inputs, headphone jack, RCA (L/R) audio input/output jacks dedicated for subwoofer
• BLUETOOTH-COMPATIBLE: The professional integrated indoor house stereo receiver is equipped w/ bluetooth wireless music streaming. Works w/ today’s latest devices including smartphones, tablets, laptops and computers with hassle-free receiver pairing
• FRONT PANEL CONTROL: The sound speaker amplifying device features front panel controls w/ independent audio source selection, rotary control center for microphone volume & echo control. It also features LED backlight illumination w/ dimmer control
• RACK MOUNT: High powered home theater pro audio receiver features a universal rack mount design w/ built-in cooling fan & integrated overload/short circuitry protection. Includes 2 UHF wireless handheld microphones, mounting brackets & remote control

User questions & answers

Question:	What pyle brand speakers are recommended forr thia prodauct
Answer:	Hi, yes you can connect your 150 watts speakers to this unit. The amp can handle 750 watts per channel. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PWMA3003BT for more details. Thank you.
Question:	How does this connect to a tv that doesn't have RCA audio-out ports
Answer:	Hola, sí, viene con micrófonos. Puede consultar otros detalles de la unidad visitando nuestro sitio web pyleaudio.com. Escriba el número de modelo en el cuadro de búsqueda PWMA3003BT para obtener más detalles. Gracias.
Question:	I have 2 pairs of speakers with 150 watt (8ohms) both, is this ampliflier will work on my speakers
Answer:	The warranty is 1 year. Have a great day!
Question:	Trae los micrófonos incluidos
Answer:	Hi Scott,Thanks for your interest in Seismic Audio and our Landslide-12P, powered mixer. The RCA on the Landslide are inputs and their level is controlled by the Main left and right faders. However, if you can go another route, say dual 1/4" TS or dual Male XLR, and input into 2 actual input channels, you will have more control over the sound. If you input into 2 channels, you will want to make sure that the controls are the same i.e. the gain, EQ, and volume fader. You can set 1 channel to pan hard left, and the other channel hard right. This will actually send a true stereo signal to your main outputs. Here is a link to these cables on Amazon:SAiXLRY10:http://www.amazon.com/Seismic-Audio-Stereo-Splitter-Patch/dp/B0072JJYDQ/ref=sr_1_4?s=musical-instruments&ie=UTF8&qid=1425924864&sr=1-4&keywords=seismic+audio+splitterSAiTSY6http://www.amazon.com/Seismic-Audio-SAiTSY6-Stereo-Splitter/dp/B009LNTQ84/ref=sr_1_20?s=musical-instruments&ie=UTF8&qid=1425924864&sr=1-20&keywords=seismic+audio+splitterThanks,Rusty

Product features

Bluetooth Multi-Channel Hybrid Pre-Amplifier System

The Pyle Bluetooth Multi-Channel Hybrid Pre-Amplifier System 4 Channel pre-amplifier is perfect for your Karaoke and home entertainment system. It gives you 3000W peak power to be used for multi speakers W/ 2-8 ohms impedance allowing you to enjoy high-quality audio

FRONT PANEL CONTROL

The sound speaker amplifying device features front panel controls w/ independent audio source selection, rotary control center for microphone volume & echo control. It also features LED backlight illumination w/ dimmer control

Remote Control

Remote control for distant Audio adjustments and 2 VHF high band Wireless mics are included

BLUETOOTH-COMPATIBLE

The professional integrated indoor house stereo receiver is equipped w/ bluetooth wireless music streaming. Works w/ today’s latest devices including smartphones, tablets, laptops and computers with hassle-free receiver pairing

Audio Input/Output Jacks

The digital amp box supports FM/AM radio, MP3 audio playback & other external devices. It is equipped w/ USB & SD card readers, AUX 3.5mm input, 2 ¼” mic inputs, headphone jack, RCA (L/R) audio input/output jacks dedicated for subwoofer