13 best arkon tablet gps

Product description

The TAB188L22 car or truck seat rail or floor tablet mount is ideal for service vehicles fleets and trucks. It can be used with all tablets 7 to 18.4 inches in screen size, including Samsung Galaxy Tab S Series, Samsung Galaxy Note, Samsung Galaxy Tab Pro, Samsung Galaxy Tab 3, Samsung Galaxy Tab A, Apple iPad, Apple iPad Pro, Apple iPad Air, Amazon Fire Series, Microsoft Surface Pro, and Microsoft Surface Go 2. This mount includes Arkon’s Slim-Grip Universal Tablet Holder and a seat rail or floor mount with 22-inch flexible aluminum gooseneck. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet to be inserted at the top and bottom of the holder. The support legs can be easily adjusted in order to keep any side buttons and ports unobstructed. For vertical viewing, adjust the 360-degree swivel and then re-tighten. This aluminum car seat rail or floor mount is ideal for those who prefer mounting their tablet somewhere other than the windshield or dash. Use a socket wrench to install the mount to the car’s seat rail. Bend the 22-inch gooseneck for exact positioning of the tablet. Optional floor brackets are included for screwing the mount directly into the floor of the vehicle. (Warning: Drilling into the vehicle’s floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.)

• Seat rail floor mount is ideal for service vehicles fleets and trucks
• Tablet mount features a 22 inch gooseneck
• Slim Grip Holder fits tablets 7 to 18.4 inches in screen size
• U.S. Pat. No. 6,585,212
• 2 year limited warranty
• Compatible devices: Amazon Kindle Fire HD/Apple iPad 2/Apple iPad 3/Apple iPad 4/Apple iPad Air/Motorola Xoom

User questions & answers

Question:	Um, it didn’t come with the seat rail mount? How can I get that and the bolts long enough to attach it
Answer:	Uses the existing seat rail mounting bolt, just need to loosen bolt and slide mounting clip under rail and bolt. On GM vehicles the bolt head is torx, a 15mm socket will work on torx head bolt. Bracket can slightly restrict total forward travel of seat. All that being said, a great product for holding tablets in place.
Question:	will this fit an iPhone X
Answer:	Yes. It’s fits all the way up too iPad Pro
Question:	Will this fit a Galaxy Tab A with a case
Answer:	I have a generic pad and it fits. It adjust pretty wide.
Question:	Will this work with an iPad Air2 w/an otterbox case
Answer:	yes, IF it will actually attach to your car seat or you dont mind drilling holes on your car. I have a F350 superduty no such luckk had to mount it totally different. A 1 hole conduit strap screwed into the side of my console for support because the aluminum rod is sturdy but it sways like a sailor at sea.its not bad for the money also buy the extendable arm mount for the windshield, I have 2 note pro 12.2 note 3 for work and that pesky 8 ball pool. Now hope ata hep ya

Product features

Arkon Car or Truck Seat Rail or Floor Tablet Mount with 22 inch Arm for iPad Pro iPad Air 2 iPad Retail Black

The TAB188L22 car or truck seat rail or floor tablet mount can be used with tablets 7 to 18.4 inches in screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab A 8.0, Galaxy Tab E 8.0, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1, Galaxy Tab Pro 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, and LG G Pad 10.1.

Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed.

For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel and then re-tighten. The aluminum car seat rail or floor mount is ideal for those who prefer mounting their tablet somewhere other than the windshield or dash.

Product description

The TAB-CM117 long arm extension windshield suction car mount is ideal for use with all large tablets 7 to 18.4 inches in screen size, including Samsung Galaxy Tab S Series, Samsung Galaxy Note, Samsung Galaxy Tab Pro, Samsung Galaxy Tab 3, Samsung Galaxy Tab A, Apple iPad, Apple iPad Pro, Apple iPad Air, Amazon Fire Series, Microsoft Surface Pro, and Microsoft Surface Go 2. This mount includes Arkon’s Slim-Grip Ultra Universal Tablet Holder and a Windshield Suction Pedestal with Telescoping Arm. This mount is ideal for cars and especially trucks, vans, or delivery vehicles with deep dashboards. The sturdy telescopic arm of the pedestal extends from 14.5 inches to 18.5 inches, keeping the tablet within easy reach. The suction pedestal installs easily to the windshield. Simply hold the base against the mounting area and push down on the one-touch lever. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet to be inserted at the top and bottom of the holder. The support legs can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel and then re-tighten.

• TAB-CM117 windshield mount fits tablets 7 to 18.4 inches in screen size
• Ideal for cars, trucks, vans, or delivery vehicles with deep dashboards
• Sturdy adjustable arm extends 14.5 inches to 18.5 inches
• U.S. Pat. No. 6,585,212
• 2 year limited warranty

User questions & answers

Question:	Can it be attached to a disk so that it can be mounted to the dash instead of the glass
Answer:	Yes, it can
Question:	Will this work with an iPad Pro
Answer:	It works with my iPad Pro 12.9 also
Question:	Will this be big enough for the samsung galaxy note pro 12.2 inch tablet
Answer:	I’m using it on my iPad Pro 12.9 Inch and it works Great!!
Question:	If I mount my Galaxy Tab 10.1 in this holder, will the camera have a clear view of the road (for use as a dash cam
Answer:	It depends on how your vehicle's dash is configured. The mount arm must rest on the dash for support. If the dash is low, or angled downward, it may not work. I cannot use my iPad as a dash cam with this mount. But on the flipside it is a great mount at a great price.

Product features

Arkon Large Tablet Long Arm Windshield Suction Mount

The TAB-CM117 long arm extension windshield suction car mount is ideal for use with all large tablets 7 to 18.4 inches in screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab A 8.0, Galaxy Tab E 8.0, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1, Galaxy Tab Pro 12.2, Galaxy Tab S 10.5, Google Pixel C, Nexus 10, and Nexus 9, and LG G Pad 10.1. This mount includes Arkon’s Slim-Grip Ultra Universal Tablet Holder and a Rigid Long Extension Windshield Suction Pedestal with Telescoping Arm. This mount is ideal for cars and especially trucks, vans, or delivery vehicles with deep dashboards. The sturdy telescopic arm of the pedestal extends from 14.5 inches to 18.5 inches, keeping the tablet within easy reach. The suction pedestal installs easily to the windshield. Simply hold the base against the mounting area and push down on the one-touch lever.

Features

• Fits large tablets 7" to 18.4" in screen size, even with cases
• Support legs are customizable and adjustable
• Ideal for cars, trucks, vans, or delivery vehicles with deep dashboards

Product description

The TAB-FSM car or truck seat rail or floor tablet mount can be used with all tablets 7 to 18.4 inches in screen size, including Samsung Galaxy Tab S Series, Samsung Galaxy Note, Samsung Galaxy Tab Pro, Samsung Galaxy Tab 3, Samsung Galaxy Tab A, Apple iPad, Apple iPad Pro, Apple iPad Air, Amazon Fire Series, Microsoft Surface Pro, and Microsoft Surface Go 2. This mount includes Arkon’s Slim-Grip Universal Tablet Holder and a seat rail or floor mount with 18-inch flexible aluminum gooseneck. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet to be inserted at the top and bottom of the holder. The support legs can be easily adjusted in order to keep any side buttons and ports unobstructed. For vertical viewing, adjust the 360-degree swivel and then re-tighten. The aluminum car seat rail or floor mount is ideal for those who prefer mounting somewhere other than the windshield or dash. Use a socket wrench to install the mount to the car’s seat rail. Bend the 18-inch gooseneck for exact positioning of the tablet. Optional floor brackets are included for screwing the car dock directly into the floor of the vehicle. (Warning: Drilling into the vehicle’s floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.)

• TAB-FSM tablet mount recommended for use by fleets, service vehicles, and trucks
• Mounts to car or truck seat rail or floor and features 18-inch gooseneck
• Holds tablets 7 to 18.4 inches in screen size
• U.S. Pat. No. 6, 585, 212
• 2 year limited warranty

User questions & answers

Question:	Would this product fit the Apple iPad
Answer:	Yes, it will.
Question:	what is the size range this holder can hold? I have a Nexus 7 and I am afraid it will be too small for this holder, help
Answer:	I used for my nexus 7 as well, it fits perfect!! The only down side is not durable, mine broke only six months. Average use...
Question:	I would like to take the tablet inside with me on each sales call about 4 times per day. Is it easy to remove and replace tablet in the holder
Answer:	Very easy. I was removing and placing my iPad frequently. The hold remained snug.
Question:	Will this fit snug a 4th Gen iPad? Will it be in the way of a passenger
Answer:	Yes it will fit with no issues! In regards to the passenger I guess it has to do with how big or small the vehicle is! I have a 2010 Honda Accord and a 2007 Pacifica and they fit just fine. My coworker has a civic and his passengers haven't complaint about it!

Product description

The TABRMAMPS heavy-duty drill base mount is part of Arkon’s Robust Mount Series. It mounts to walls or other solid flat surfaces with screws, and holds tablets with 7”-18.4” screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab A 8.0, Galaxy Tab E 8.0, Galaxy Tab S 10.5, Google Pixel C, Microsoft Surface Pro, Nexus 10, Nexus 9, and LG G Pad 10.1. This mount includes the Heavy-Duty 4-Hole AMPS Mounting Pedestal and the Slim-Grip Universal Tablet Holder. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed. For smaller tablets, use all 4 short support legs. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel. The mount uses the 4-Hole AMPS mounting pattern, which consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). The tough, low vibration pedestal measures approximately 4.5 inches high from the bottom of the mount base to the top of the mount pedestal (not including holder). The pedestal swivels on both top and bottom, providing flexibility in positioning the tablet at any angle. The mount can also be screwed directly into the floor of your vehicle. (Warning: Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.)

• Holds 7 to 18.4 inch screen size tablets
• Spring loaded tablet holder with adjustable support legs ensure proper fit
• Low vibration amps mounting pedestal attaches with screws to solid flat surfaces
• U.S. Pat. No. 6,585,212
• 2 year limited Warranty

User questions & answers

Question:	How thick are the grips? Wondering if it will hold a table with a thick, heavy duty waterproof case
Answer:	I have a galaxy 10.1 with an OtterBox waterproof case mounted on my boat for backup navigation. The mount holds it in place while the boat is running 30 knots with no issues.
Question:	can i drill and mount it into the dash board of a tractor truck
Answer:	We drilled & mounted it onto the dash board area of our golf cart; works well.
Question:	will this fit an iPad Pro
Answer:	Yes. I even have the 12.9 iPad Pro in a waterproof case and it fits with room to spare. I use it as an additional mfd screen on my boat. Mount has held up well to moderate waves at speed.
Question:	Will this hold iPhone
Answer:	Yes 👍 it is

Product features

PRODUCT FEATURES

• Fits 7 to 18.4 inch screen size tablets
• Spring-loaded holder and adjustable support legs ensure proper fit
• Low-vibration 4-Hole AMPS mount base attaches with screws to solid flat surfaces, including car dashboards

PRODUCT DETAILS

TABRMAMPS-MET is a heavy-duty drill base mount that is part of Arkon’s Robust Mount Series. It mounts to walls or other solid flat surfaces with screws, and holds tablets with 7 inch-18.4 inch screen size. This mount includes a Heavy-Duty Mounting Pedestal with Metal 4-Hole AMPS Drill Base and a Slim-Grip Universal Tablet Holder. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder.

Product description

The TAB806 tablet mount can be used with all large tablets 7 to 18.4 inches in screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1, Galaxy Tab Pro 12.2, Galaxy Tab A 8.0, Galaxy Tab E 8.0, Galaxy Tab S 10.5, Google Pixel C, Microsoft Surface Pro, Nexus 10, and Nexus 9, and LG G Pad 10.1. This mount includes Arkon’s Slim-Grip Universal Tablet Holder and Heavy-Duty Multi-Angle Aluminum Mounting Pedestal with 8” Adjustable Arm and 4-Hole AMPS Drill Base. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel and then re-tighten. The 4-hole drill base mount is made of strong aluminum, and is ideal for environments where a more permanent solution is desirable, such as in a workshop or in retail. Screws are included. Adjust the 8” adjustable arm and rotate the swivel ball adapter head for 360° rotation for exact positioning of the tablet.

• Slim Grip Universal Holder fits tablets 7 to 18.4 inches in screen size
• Tablet holder’s support legs are customizable and adjustable
• U.S. Pat. No. 6,585,212
• 2 year limited warranty
• 2 year limited warranty

User questions & answers

Question:	Does it work
Answer:	Works great! I have it mounted in my plane for a 10" Samsung tablet that gets bounced around from time to time with no problems whatsoever.
Question:	What is the material of the "bracket" that fixes the arm to the ball of the base? Is it metal (for dead certain attachment) or plastic
Answer:	All of it is metal and aluminum the only plastic part is the part that holds the tablet I recommend when you get it that you tighten the screw to where the plastic arms attach, I had that issue when I got mine. Hope this helps.
Question:	What is the distance between screw holes? Also what size is the mounting piece? Thanks for the answers
Answer:	Distance between the holes are 1 5/16" on Long Side, and 1" on the Short Side. The length and width of the mounting piece is 2 1/8" x 1 3/4".
Question:	Will this fit a Samsung Galaxy Tab A 8" with or without a case
Answer:	I would assume. It fits my IPAD pro 12.9

Product features

Ideal for Commercial and Fleet Vehicles

Arkon's TAB806 tablet mount is a great option for permanent installation in a truck dashboard or console for hands-free driving. The sturdy multi-angled arm allows for easy positioning of the tablet.

Flexibility and Convenience

Featuring a 180-degree rotation along with a multi-angled arm with three adjustment points, this is one of Arkon's most versatile drill-base tablet mounts. The options are endless!

Put the Tablet Right Where you Need it

This mount helps make the most of any space-constrained area and puts the tablet right at the hands of those who need them, including at a bedside.

Product description

The TABRM079 Heavy-Duty sticky suction windshield or dash tablet mount is part of Arkon's robust mount series. It holds large tablets having 7"-18.4” screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy view, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab A 8.0, Galaxy Tab E 8.0, Galaxy Tab s 10.5, Google pixel C, Microsoft Surface Pro, Nexus 10 and Nexus 9, and LG G Pad 10.1. This mount includes a heavy-duty sticky suction mounting pedestal and the Slim-Grip Universal Tablet holder. The mount is ideal for car dashboards, windshields, and other flat or slightly textured surfaces. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size and features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, The best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. For smaller tablets, Use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel. The tough, low vibration pedestal measures approximately 6.5 inches high from the bottom of the mount base to the top of the mount Pedestal (not including holder). The 80mm sticky suction base works well in all climates by using a powerful combination of polyurethane gel and suction to provide a maximum surface bond. In order to prevent permanent indentation marks on soft vinyl, leather, or similar dash surfaces, ARKON recommends using the included 3M adhesive dash mounting disk.

• Slim GRIP holder fits tablets 7 to 18.4 inches in screen size
• Tablet support legs are customizable and adjustable
• Sticky suction mount base performs well in all climates
• U.S. Pat. No. 6, 585, 212
• 2 year limited Warranty

User questions & answers

Question:	Is it a suction cup or sticky? I need something that is suction only and easy to install and remove often
Answer:	It is a suction cup, but the material is made to stick to the surface very good almost like it was sticky. You can remove it easly anyways.
Question:	Will the suction have issues after being removed and replaced several times
Answer:	I have not had any issues with it. It seems to work very well.
Question:	Can it tilt, swivel, and rotate to different viewing angles from only the driver to only the passenger without having to release the suction
Answer:	Yes. There are 2 ball joints (one connected to the holder and the other at the base) that offer 360 degree rotation for various viewing angles.
Question:	My 7 inch monitor is 4 3/4 inches tall. Will it hold it? I know it says 7 inch screen size. I need to know the min height it will hold please
Answer:	Minimum height is going to be 6"

Product description

Arkon’s TAB131 clamp post tablet mount fits large tablets 7 to 18. 4 inches in screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10. 1, Galaxy Note Pro 12. 2, Galaxy Tab 4 10. 1, Galaxy Tab Pro 10. 1, Galaxy Tab Pro 12. 2, Galaxy Tab A 8. 0, Galaxy Tab E 8. 0, Galaxy Tab S 10. 5, Google Pixel C, Nexus 10, and Nexus 9, and LG G Pad 10. 1. This mount is a great add-on to Arkon's Pro Stand for Live Video (Model HD8RV29). Attach TAB131 to the shaft/pole portion of the Pro Stand and use it to log in to live video apps on a secondary device like an iPad to see comments or to see the view of the phone that’s positioned overhead. This mount can also be used with Switcher Studio to create two-camera videos. This mount includes Arkon’s Clamp Post Mount with Slim-Grip Universal Tablet Holder. The Slim-Grip tablet holder fits tablets 7 to 18. 4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed. For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel. The mount is also ideal for use on a wheelchair or microphone stand. The clamp post mount fits on handlebars and other types of posts measuring 12 to 40mm in diameter and is easy to install with a turn of the mount’s knob. The mount’s swivel ball adapter head rotates 360 degrees, providing the ultimate flexibility in viewing the tablet from any angle.

• Clamp post mount fits handlebars measuring 12 to 40mm in diameter
• Fits Apple iPad Air, iPad and tablets 7 to 18. 4 inches in screen size
• Holder’s support legs can be customized for various size tablets
• U. S. Pat. No. 6, 585, 212
• 2 year limited

User questions & answers

Question:	This product has a california proposition 65 warning. where can i see which chemical in this product is possibly harmful to you
Answer:	California...unfortunately they don’t make the tablet holder out of lettuce
Question:	Will this hold a Surface Pro
Answer:	Yes. The ipad is a little heavy, but the clamp can hold it well at a desired angle. It has worked very well for me, for over two years. I rarely remove my iPad Pro 12.9” from the clamp.
Question:	Will this clamp to a dash
Answer:	I don't believe so, it's designed to attach to the pole part of the larger Akron stand as seen here - https://www.amazon.com/Arkon-Phone-Baking-Crafting-Videos/dp/B01I4N1SW8/ref=sr_1_2?dchild=1&keywords=Akron+stand&qid=1598883989&sr=8-2
Question:	can i use this to attach my ipad pro to a mic stand
Answer:	You can, I do this as well. Just make sure to tighten the connections.

Product description

Arkon Heavy Duty Tablet Drill Base Mount for Wall or Counter for iPad Pro iPad Air iPad Retail Black Product description (optional) : The TAB805 tablet mount can be used with all large tablets 7 to 18.4 inches in screen size, including Apple iPad Pro, iPad Air 2 and iPad Air, iPad 4, 3, and 2, Samsung Galaxy View, Galaxy Note 10.1, Galaxy Note Pro 12.2, Galaxy Tab 4 10.1, Galaxy Tab Pro 10.1 and 12.2, Galaxy Tab A 8.0, Galaxy Tab E 8.0, Galaxy Tab S 10.5, Google Pixel C, Microsoft Surface Pro, Nexus 10, and Nexus 9, and LG G Pad 10.1. This mount includes Arkon’s Slim-Grip Universal Tablet Holder and Heavy-Duty Aluminum Mounting Pedestal with 10” Adjustable Arm and 4-Hole Drill Base. The Slim-Grip tablet holder fits tablets 7 to 18.4 inches in screen size. The holder features a spring-loaded design that makes it easy to insert or remove the tablet by pushing down on the lower legs of the holder with one hand. Included with the holder are 10 support legs (4 short, 2 medium and 4 long versions). Choose the 4 legs that provide the best fit for your tablet. These insert at the top and bottom of the holder and can be easily adjusted in order to keep any side buttons and ports unobstructed. For most large tablets, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. For smaller tablets, use all 4 short support legs on the holder. For larger tablets including iPad Pro, use all 4 long legs. For vertical viewing, adjust the 360-degree swivel. The 4-hole drill base mount features two adjustment points and is made of strong aluminum. It’s ideal for environments where a more permanent solution is desirable, such as in a workshop or in retail. Screws are included. Bend the 10” adjustable arm and rotate the swivel ball adapter head for 360° rotation for exact positioning of the tablet.

• Slim Grip Universal Holder fits tablets 7 to 18.4 inches in screen size
• Tablet support legs are customizable and adjustable
• Drill base recommended for permanent installations
• U.S. Pat. No. 6,585,212
• 2 year limited warranty

User questions & answers

Question:	will it holp an iPad pro
Answer:	Yes, it does
Question:	will it hold a iPad pro
Answer:	Yes, it will
Question:	Will it hold iPad
Answer:	I use it for a 10" RCA Android tablet. I also have one in my semi that I use for a work IPad, not sure what model it is , but it is larger than the RCA
Question:	Will it hold Galaxy tab A
Answer:	Yes, it will.

Product description

The XLRM023 car cup holder large phone and midsize tablet mount is part of Arkon’s Robust Mount Series. It fits easily into car or truck cup holders, with the mount’s base expanding as wide to 3.5 inches in diameter. This cup holder mount features Arkon’s RoadVise XL large phone and midsize tablet holder, which holds devices (even those with skins and ruggedized cases) up to 5” wide. The mount fits Apple iPhone XS Max, iPhone XS, iPhone XR, iPhone 8 Plus, iPhone 7 Plus, Samsung Galaxy Note 9 and Note 8, Galaxy S10, S9, and S8, LG G6 and G6+, G5, and G4, Google Nexus 6 and Nexus 5, Nokia Lumia 1520 and 1020, and Motorola Moto G. This mount is not recommended for phones without a case measuring 2.64 inches wide or less, including iPhone 8 or iPhone 7. The mount also fits midsize (7-8” screen size) tablets measuring up to 5” wide, including Galaxy Tab A 8.0, Galaxy Tab E 8.0, Galaxy Tab S 8.4, Galaxy Tab 3 7.0 and 8.0, and Google Nexus 7. The holder’s spring-loaded mechanism holds the phone securely while making it easy to insert or remove the phone from the holder. The mount’s double ball adjustment allows for flexibility in positioning the device.

• Mount base fits cup holders up to 3.5 inches in diameter
• Holds phones and midsize tablets up to 5 inches wide
• Spring loaded holder provides easy insertion and removal
• U.S. Pat. No. 6,585,212
• 2 year limited warranty

Product description

The RM6AMPS2T drill base mount is part of Arkon’s Robust Mount Series and mounts to walls or other solid flat surfaces with screws. It holds all smartphones (even with cases) up to 7.5” tall, including iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 and 8 Plus, iPhone 7 and 7 Plus, Samsung Galaxy Note 9, Note 8 and Note 5, Galaxy S10, S9, S8, and S7, LG G6, G5, and G4, Nexus 6 and Nexus 5, HTC One M9, One M8, and One Max, Nokia Lumia 1520 and 1020, Motorola Moto G and Moto X. It also holds midsize (7” or 8” screen size) tablets, including iPad mini, Galaxy Note 8.0, Galaxy Tab 3 7.0 and 8.0, Galaxy Tab Pro 8.4, and Google Nexus 7. This mount includes a heavy-duty 4-Hole AMPS mounting pedestal and Slim-Grip Ultra universal smartphone and midsize tablet holder. The spring-loaded holder includes eight support legs (4 short and 4 longer versions) that slide onto the top and bottom of the holder to ensure the right fit for your phone or tablet and keep side buttons and ports unobstructed. The mount uses the 4-Hole AMPS mounting pattern, which consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). The tough, low-vibration pedestal measures approximately 4.5 inches high from the bottom of the AMPS base to the top of the pedestal (not including the holder) and is made of plastic and nylon. The pedestal swivels on both the top and the bottom, providing 360-degree rotation and flexibility in positioning the device at any angle. The mount can also be screwed directly into the floor of your vehicle. (Warning: Drilling into the vehicle’s floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.)

• iPhone XS Max XS XR X 8 Galaxy S10 S9 Note 9 8 5 compatible
• Low vibration 4 Hole AMPS mount attaches with screws to walls and other solid flat surfaces
• U.S. Pat. No. 6,585,212
• 2 year limited warranty

User questions & answers

Question:	Will this fit a galaxy tab E
Answer:	It will grip it on the long sides. We have them n our semi trucks with Tab Es.
Question:	Will this mount fit an asus zenpad z8s? it is similar in size to the ipad mini
Answer:	Yes it will comes with different arm attachments
Question:	Does it hold an iphone 7 firmly
Answer:	Yes it does! Once drilled on our work van the base mount is very firm we’re very happy with this product!
Question:	Can different mount bases be used
Answer:	For my application, I created an additional plate that attached to my exercise machine. I attached the Akron unit into the plate using screws and it worked prefectly.

Product features

PRODUCT FEATURES

• Ideal for iPhone X, 8, 7 Plus, iPhone 8, 7, 6S, and phones up to 3.6" screen size
• Spring-loaded holder and customizable support legs ensure a perfect fit
• Low-vibration 4-Hole AMPS mounting pedestal attaches with screws to walls and other solid, flat surfaces

PRODUCT DETAILS

The RM6AMPS2T drill base mount is part of Arkon’s Robust Mount Series and mounts to walls or other solid flat surfaces with screws. It holds all smartphones (even with cases) up to 7.5” tall. This mount includes a heavy-duty 4-Hole AMPS mounting pedestal and Slim-Grip Ultra universal smartphone and midsize tablet holder. The spring-loaded holder includes eight support legs (4 short and 4 longer versions) that slide onto the top and bottom of the holder to ensure the right fit for your phone or tablet and keep side buttons and ports unobstructed. The mount uses the 4-Hole AMPS mounting pattern, which consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes).

Product description

The GPSHDCS7 versatile padded hard shell protective case with zipper securely holds 5-inch GPS devices, including Garmin nuvi models 2595LMT, 3597LMTHD, 3590LMT, 50LM, 2555LMT, 2597LMT, 560LMT, 1490LMT, 2577LT, 2557LMT, 2460LMT, and Garmin dezl 560LT, 6-inch GPS devices, including Garmin nuvi models 65LM, 65LMT, 66LM, and 66LMT, as well as 6-inch TomTom models VIA 1605TM and Start 60, and 7-inch GPS devices, including Garmin nuvi models 2797LMT, 2757LM, 2798LMT, Garmin dezl 760LMT, Garmin RV 760LMT, and Garmin 2978. The case also holds 7-inch Magellan Roadmate models 1700, 9055, 9250T-LMB, RM9200-LM, and RV9145-LM. Some midsize tablets (7” screen size), including the Kindle Fire, also fit in this case. You can even store headphones, including the Bose AEZw. This sturdy, padded hard shell protective case measures 7.25 inches long x 4.5 inches wide x 1 inch thick. The zippered case has a built-in pad to protect the device’s screen, as well as a removable pad to be used with 5-inch GPS devices. A handy pocket on the inside lid of the case keeps charger cords or other accessories organized.

• Compatible with 5 in. 6 in. and 7 in. GPS devices as well as selected 7 in. tablets and other accessories
• Case measures 7.25 in. long x 4.5 in. wide x 1 in. thick
• Use removable pad for 5 in. GPS devices
• 2 year limited warranty provided by Arkon

User questions & answers

Question:	Looking for the smallest case that will hold a garmin drivesmart 61lmt-s. is this it? what are all exterior and interior dimensions of this case
Answer:	If you're Garmin Drivesmart 61lmt-s is between 5-7 inches, then this would work. Case measures 7.25 in. long x 4.5 in. wide x 1 in. thick, There is also a removable pad you can use for 5" GPS devices.
Question:	Will this fit my garmin 60ltmhd and all power cables
Answer:	Yes, it will fit GPS and the car charger.
Question:	will this item fit power cord and window attachtment
Answer:	It definitely fits the power cord, but I am not sure what you mean by the window attachment or exactly how big that might be. I would think if the item were flat, you could make it fit?
Question:	What are the internal dimensions, will it fit in a 7"x 4.5'' GPS
Answer:	The I/D of the case is approx. 7.75" x 4.75". If the dimensions you have given represent the TOTAL size of your GPS, your GPS should fit in the case.. If your GPS screen size is 7", in all probability, it would not fit into the case. The case is a good fit for my 6" (screen size) Garmin GPS and still leaves enough room for the car charger.

Product description

The SM688L22 car or truck seat rail or floor mount fits all phones up to 8” screen size, including iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 and 8 Plus, iPhone 7 and 7 Plus, Samsung Galaxy Note 9, Note 8, and Note 5, Galaxy S10, S9, S8, S7 edge, and S7, LG G6, G5, and G4, Nexus 6 and Nexus 5, Nokia Lumia 1520 and 1020, Motorola Moto G and Moto X. It also holds midsize (7” or 8” screen size) tablets, including iPad mini, Galaxy Tab S 8.4, Galaxy Note 8.0, Galaxy Tab 3 7.0 and 8.0, Galaxy Tab Pro 8.4, and Google Nexus 7. This mount includes Arkon’s Slim-Grip Ultra patented universal smartphone or midsize tablet holder and a seat rail or floor mount with 22” flexible gooseneck. The top and bottom adjustable-leg design of the holder helps keep any side buttons and ports unobstructed, making it ideal for use with the side accessible buttons on the Samsung Galaxy S7 edge and Note Edge. Included with the holder are 8 support legs (4 short and 4 longer versions) that can be customized based on device size. For most devices, the best mount holder configuration is to attach 2 short support legs on top and the 2 long support legs on the bottom of the holder. The car seat rail or floor mount is made of strong aluminum, and is ideal for those who need easy access to their devices but prefer mounting them somewhere other than the windshield or dash. Use a socket wrench to loosen the passenger seat track bolt, then insert the included seat track bolt bracket and retighten the bolt. Bend the 22” gooseneck and rotate the swivel ball adapter head for 360° rotation of the device. Optional floor brackets are included for screwing the mount into the floor of the vehicle. (Warning: Drilling into the vehicle’s floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.)

• Seat rail mount fits devices up to 8 inch screen size including iPhone XS Max XS XR X 8 Galaxy S10 S9 Note 9
• For fleets and service vehicles and trucks
• Gooseneck and swivel ball help position device
• U.S. Pat. No. 6,585,212
• 2 year limited warranty

User questions & answers

Question:	I bought this for my old iPhone6+, does it have a wireless charger adapter available
Answer:	No. It just holds your phone/tablet etc you can plug in your phone as there isn't anything in the way to prevent it from charging via 12v plug in
Question:	I have an iphone 8+ with an otterbox defender case. it measures 6.46 inches long, 3.37 inches wide and .48 inches thick. will my phone fit? thanks
Answer:	Should fit but not 100% sure. I have a 7 plus with a slimmer case and it fits.
Question:	dose it fit I Pad mini
Answer:	Fits my mini no problem. It's tight but no problem.
Question:	Will it work with the Samsung Galaxy S8 with an otterbox
Answer:	It should with no issues. It comes with pieces on the end to make it wider. I love mine

Product description

The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.

• Semi permanent adhesive mounting disc works with any 80mm windshield suction mounting pedestal for adhering to dashboards
• Compatible with Garmin and TomTom GPS mounting pedestals.Note that the disc is meant to be a bit larger than the mount to ensure a secure fit
• 2 year limited warranty

User questions & answers

Question:	Once I stick it, will I be able to remove it later or will it be a permanent fixture on my dashboard
Answer:	More or less permanent. If you remove it it won't re-stick.
Question:	Will this work with a delkin fat gecko stealth
Answer:	Yes, of course. This is a Universal Dashboard
Question:	I've tried several discs that come with adhesive on them. But the adhesive fails to stick in the Florida Sun and the discs become loose
Answer:	Two suggestions: First and foremost, when first installing the disc, make sure it's on a flat section of your dashboard and pile books on it for the first few days whenever the vehicle is not in use. This will allow the adhesive to "cure" before you attach your GPS bracket or the bracket for some other device. Secondly, try to use those aluminum foil windshield shades whenever possible and throw a wash cloth over the GPS to shade the adhesive disc whenever you're not driving the vehicle. We do this in NC where the sun is also hot and it's been working.Paul Baragona Raleigh, NC USA
Question:	any new product to remove it
Answer:	From what I understand, you can take tooth floss, soaked in alcohol,(run underneath disk) to eventually get it off. To remove the glue, once you get it off, try "Goo Gone" spray gel. Follow instructions. Get it at Home Depot, or Wal-Mart. Worked for me. It's petroleum based, so use gently at first.

Product features

PRODUCT FEATURES

• Extra-strength adhesive mounting disc adheres to dashboards and works with any 80mm suction mounting pedestal
• Compatible with Arkon CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T mounting pedestals

PRODUCT DETAILS

The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.)