11 best arkon gps cameras

Product description

The RMS2XAMPS 4-Hole AMPS Small Mounting Pedestal is part of Arkon’s Robust Mount Series. It measures just over 4” tall from base to top and is ideal for tight areas where a smaller pedestal is beneficial. It features an AMPS drill mount base as well as an AMPS head. The mount can be drilled into solid, flat surfaces, such as walls, tables, and workbenches and is compatible with devices having a 4-Hole AMPS pattern, including cameras, GPS devices, or satellite radios. The AMPS pattern consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). This tough mounting pedestal is also ideal for mobile radio holders, housings, and other devices used by public safety, construction, and utility applications. This package includes only the Heavy-Duty 4-Hole AMPS Mounting Pedestal with 4-Hole AMPS Head. This mount measures 4.13 inches high from end to end, and is made of a combination of nylon and fiber. The arm of the pedestal swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle.

• Mount measures just over 4 inches tall
• Compatible with devices with 4 Hole AMPS pattern, including vehicle specific mounts, cameras, GPS, and satellite radios
• Low vibration 4 Hole AMPS base attaches to solid flat surfaces
• 2 year limited warranty

Product description

The RM2XAMPS 4-Hole AMPS Mount is part of Arkon’s Robust Mount Series. It features an AMPS drill mount base as well as an AMPS head. It can be drilled into solid, flat surfaces, such as walls, tables, and workbenches. The mount is compatible with devices having a 4-Hole AMPS pattern, including cameras, GPS devices, or satellite radios. The AMPS pattern consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). This tough mount is also ideal for mobile radio holders, housings, and other devices used by public safety, construction, and utility applications. This package includes only the Heavy-Duty 4-Hole AMPS Mount with 4-Hole AMPS Head. This mount measures approximately 5.25 inches high from end to end, and is made of a combination of nylon and fiber. The arm of the pedestal swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle.

• Compatible with devices having the 4 Hole AMPS pattern, including vehicle specific mounts, cameras, GPS, and satellite radios
• Low vibration 4 Hole AMPS mounting pedestal base attaches to solid flat surfaces
• 2 year limited warranty

Product description

Arkon’s MC2CCAM premium aluminum motorcycle handlebar camera mount is compatible with smaller digital cameras having the 1/4”-20 mounting pattern, such as the Sony Action Cam, Sony POV HD Flash Memory Camcorder, JVC ADIXXION 2, Contour+2, and ContourROAM2. This mount package includes the Premium Motorcycle Handlebar Camera Mount with 1/4”-20 mounting bolt. Available in chrome or black (see Arkon Model MC2BCAM) finishes, the mount is made of aluminum and features a minimal but solid design. The mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter and is easy to install with the included hex key. (Three handlebar spacer/adapter rings of different widths are also included with the mount. Choose the appropriate size for optimum mounting to your handlebar.) Simply screw the bottom of your action camera onto the 1/4”-20 mounting bolt, and you’re ready to take photos or videos on your ride. The mount swivels 360 degrees to position the camera to your liking. To use the mount with a Garmin GPS device, Arkon recommends Model MC2C. Or, couple the mount with a water-resistant case for smartphones or GPS devices with Model MC2C5WPCS. For use of the mount with Arkon universal smartphone and tablet holders with the Dual-T configuration, Arkon recommends Model MC2CSBH.

• Mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter
• Made of aluminum and is easy to install
• Designed for use with 1/4”-20 compatible action cameras
• 2 year limited warranty

Product description

Arkon’s MC2BCAM premium aluminum motorcycle handlebar camera mount is compatible with smaller digital cameras having the 1/4”-20 mounting pattern, such as the Sony Action Cam, Sony POV HD Flash Memory Camcorder, JVC ADIXXION 2, Contour+2, and ContourROAM2. This mount package includes the Premium Motorcycle Handlebar Camera Mount with 1/4”-20 mounting bolt. Available in black or chrome (see Arkon Model MC2CCAM) finishes, the mount is made of aluminum and features a minimal but solid design. The mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter and is easy to install with the included hex key. (Three handlebar spacer/adapter rings of different widths are also included with the mount. Choose the appropriate size for optimum mounting to your handlebar.) Simply screw the bottom of your action camera onto the 1/4”-20 mounting bolt, and you’re ready to take photos or videos on your ride. The mount swivels 360 degrees to position the camera to your liking. To use the mount with a Garmin GPS device, Arkon recommends Model MC2B. Or, couple the mount with a water-resistant case for smartphones or GPS devices with Model MC2B5WPCS. For use of the mount with Arkon universal smartphone and tablet holders with the Dual-T configuration, Arkon recommends Model MC2BSBH.

• Mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter
• Made of aluminum and is easy to install
• Designed for use with 1/4 20 compatible action cameras
• 2 year limited warranty

User questions & answers

Product description

The RM0801420 windshield suction camera mount is part of Arkon’s Robust Mount Series and is compatible with all cameras with the standard 1/4”-20 camera mounting pattern, including those from Nikon, Sony, Samsung, Canon, Fujifilm, Olympus, Panasonic, and Pentax. This package includes only the Heavy-Duty 80mm Suction Mount with a 1/4”-20 Mounting Bolt. The Heavy-Duty Suction Mount is ideal for car windshields. This tough, low-vibration pedestal measures approximately 6.5 inches high from the bottom of the mount base to the top of the mount shaft (not including holder), and is made of a combination of plastic and glass fiber. It features an 80mm TPU suction base that works well in all climates. The arm of the pedestal swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the camera at any angle. To install, simply clean the mounting area with the included alcohol pad to ensure an optimum grip, then set the pedestal and push down on the one-touch lever to engage the suction. Simply screw the camera’s 1/4”-20 mounting pattern onto the mount’s 1/4”-20 mounting bolt and position the mount and camera as needed by loosening or tightening the side adjustment knob.

• Mount is compatible with cameras having the 1/4 20 mounting pattern
• Tough, low vibration 80mm suction pedestal attaches with a one touch lever and maintains a super strong bond
• 2 year limited warranty

User questions & answers

Product description

Arkon’s newly designed GN057 air vent mount is compatible with Garmin nuvi devices having the 17mm swivel ball mounting pattern, including the 40, 50, 200, 2013, 24x5, and 25x5 Series, as well as Garmin nuvi 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T models. This mount package includes an air vent mount with swivel ball head. The one-piece sturdy spring-loaded air vent mount clip secures onto any horizontal or vertical car air vent louvers, and also includes a support leg that rests on the bottom of the vent for added reinforcement. Cord catchers on either side of the mount help keep charging cables organized. Garmin GPS devices can be mounted by attaching the mount’s 17mm ball base to the GPS device. The swivel ball head of the air vent mount provides 360° rotation, giving you the ultimate flexibility in viewing the GPS from any angle.

• Secures onto horizontal and vertical car air vents with support leg for extra stability
• Features spring loaded clip design with two cord catchers
• Compatible with Garmin nuvi GPS devices with 17mm swivel ball mounting pattern
• 2 year limited warranty

User questions & answers

Product description

Tightening ring and camera head adapter kit converts 17mm swivel ball pattern to 1/4"-20 threaded camera pattern. Converts Arkon GNxxx series mounts (sold separately) or Garmin Nuvi mounting pedestals (sold separately) for compatibility with digital cameras, camcorders, or sports cameras having the 1/4"-20 threaded female mounting pattern. Adapter only. Not a complete solution by itself.

• Converts your existing Garmin Nuvi mounting pedestal into one that can hold a camera having the 1/4"-20 threaded mounting pattern.
• Converts any Arkon GNxxx series mounting pedestal into one that can hold a camera having the 1/4"-20 threaded mounting pattern.
• Not a complete solution by itself. Requires being attached to a 17mm compatible mounting pedestal (sold separately)
• Compatible with Arkon GN010, GN014, GN015, GN016, GN018, GN022, GN033, GN042, CM088-G17, GN097 (all sold separately)

User questions & answers

Product description

The MRM2XAMPS 4-Hole amps drill base mounting pedestal is part of arkon’s Robust mount series. It features a heavy-duty metal amps drill mount base as well as a METAL amps head for extra stability in commercial vehicle use. It can be drilled into solid, flat surfaces, such as car dashboards or consoles as well as walls, tables, and workbenches. The mount is compatible with devices having a 4-hole amps pattern, including cameras, GPS devices, or satellite radios. This tough mount is also ideal for mobile radio holders, housings, and other devices used by public safety, construction, and utility applications. The amps pattern consists of four holes located in a rectangular pattern Spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). this package includes only the heavy-duty mounting pedestal with metal 4-Hole amps drill base and head. This mount measures approximately 5 inches high from End to end, and the mount shaft is made of metal. The arm of the pedestal swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle.

• Compatible with devices with 4 hole amps pattern, including vehicle specific mounts, cameras, GPS, and satellite radios
• Mounting pedestal base attaches to solid flat surfaces
• Metal amps drill base and head for extra stability
• 2 year limited warranty

Product description

The RM080AMPS windshield suction mount is part of Arkon’s Robust Mount Series and is compatible with devices having an industry-standard 4-Hole AMPS pattern, including cameras, GPS devices, satellite radios, or audio/video receivers. The 4-Hole AMPS mount pattern consists of four holes located in a rectangular pattern spaced at 30.17mm by 38.05mm (measured as the center-to-center distance between holes). This mount is also ideal for mobile radio holders, housings, and other devices used by public safety, construction, and utility applications. This package includes only the Heavy-Duty 80mm Suction Mount with 4-Hole AMPS Head. This tough, low-vibration mount measures approximately 4.5 inches high from the suction base to the top of the pedestal (holder not included), and is made of a combination of plastic and glass fiber. It features an 80mm TPU suction base that works well in all climates. The arm of the mount swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle.

• Suction mount is compatible with GPS, cameras, and other devices having the 4 Hole AMPS pattern
• Low vibration suction mounting pedestal
• 80mm suction pedestal attaches with a one touch lever and maintains a super strong bond
• 2 year limited warranty

Product description

The GN042 windshield suction car mounting pedestal is compatible with Garmin nuvi devices having the 17mm swivel ball mounting pattern, including models in the 40, 50, 200, 2013, 24x5, and 25x5 Series, as well as Garmin nuvi models 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T. (The above listed Garmin nuvi devices should include a 17mm swivel-ball-compatible mount bracket; replacement brackets and holders sold separately.) This mount package includes Arkon’s Windshield Suction Mount with 8.5” Flexible Gooseneck. The windshield mounting pedestal features PVC suction and an 8.5” flexible gooseneck, which is ideal for placement on deep or slanted windshields. The windshield suction mounting pedestal provides 360° rotation, giving you the ultimate flexibility in viewing the Garmin GPS from any angle.

• Compatible with Garmin GPS devices with a 17mm ball mount base (brackets and holders sold separately)
• Mount features PVC suction and 8.5 inch flexible gooseneck
• 2 year limited warranty

User questions & answers

Product description

The CM088-G17 seat rail or floor car mount is compatible with Garmin nuvi devices having the 17mm swivel ball mounting pattern, including models in the 40, 50, 200, 2013, 24x5, and 25x5 Series, as well as Garmin nuvi models 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T. (The above listed Garmin nuvi devices should include a 17mm swivel-ball-compatible mount bracket; replacement brackets and holders sold separately by Arkon.) This mount package includes only Arkon’s 15-inch Flexible Steel Seat Rail or Floor Mount. The car seat rail or floor mount is made of strong yet flexible steel, and is ideal for service vehicles, trucks, or those who need easy access to their devices but prefer mounting them somewhere other than the windshield or dashboard. The mount measures 18 inches end-to-end with a 15-inch flexible gooseneck. Use a socket wrench to install the mount to the car’s seat rail. Loosen the passenger seat track bolt, insert the included seat track bolt bracket, and then retighten the bolt. Bend the 15” gooseneck and rotate the swivel ball adapter head for 360-degree rotation for exact positioning of the device. Optional floor brackets and screws are included for screwing the mount directly into the floor of the vehicle. (Warning: Drilling into the vehicle’s floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.)

• Compatible with Garmin GPS devices with a 17mm ball mount base
• 15 inch gooseneck and swivel ball provide ideal positioning of device
• Strong yet flexible steel mount recommended for service vehicles and trucks
• 2 year limited warranty

User questions & answers