12 best arkon camera with gps

Product description

The RMS2XAMPS 4-Hole AMPS Small Mounting Pedestal is part of Arkon’s Robust Mount Series. It measures just over 4” tall from base to top and is ideal for tight areas where a smaller pedestal is beneficial. It features an AMPS drill mount base as well as an AMPS head. The mount can be drilled into solid, flat surfaces, such as walls, tables, and workbenches and is compatible with devices having a 4-Hole AMPS pattern, including cameras, GPS devices, or satellite radios. The AMPS pattern consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). This tough mounting pedestal is also ideal for mobile radio holders, housings, and other devices used by public safety, construction, and utility applications. This package includes only the Heavy-Duty 4-Hole AMPS Mounting Pedestal with 4-Hole AMPS Head. This mount measures 4.13 inches high from end to end, and is made of a combination of nylon and fiber. The arm of the pedestal swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle.

• Mount measures just over 4 inches tall
• Compatible with devices with 4 Hole AMPS pattern, including vehicle specific mounts, cameras, GPS, and satellite radios
• Low vibration 4 Hole AMPS base attaches to solid flat surfaces
• 2 year limited warranty

Product description

The RM2XAMPS 4-Hole AMPS Mount is part of Arkon’s Robust Mount Series. It features an AMPS drill mount base as well as an AMPS head. It can be drilled into solid, flat surfaces, such as walls, tables, and workbenches. The mount is compatible with devices having a 4-Hole AMPS pattern, including cameras, GPS devices, or satellite radios. The AMPS pattern consists of four holes located in a rectangular pattern spaced at 30.17mm x 38.05mm (measured as the center-to-center distance between holes). This tough mount is also ideal for mobile radio holders, housings, and other devices used by public safety, construction, and utility applications. This package includes only the Heavy-Duty 4-Hole AMPS Mount with 4-Hole AMPS Head. This mount measures approximately 5.25 inches high from end to end, and is made of a combination of nylon and fiber. The arm of the pedestal swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the device at any angle.

• Compatible with devices having the 4 Hole AMPS pattern, including vehicle specific mounts, cameras, GPS, and satellite radios
• Low vibration 4 Hole AMPS mounting pedestal base attaches to solid flat surfaces
• 2 year limited warranty

Product description

The RM0801420 windshield suction camera mount is part of Arkon’s Robust Mount Series and is compatible with all cameras with the standard 1/4”-20 camera mounting pattern, including those from Nikon, Sony, Samsung, Canon, Fujifilm, Olympus, Panasonic, and Pentax. This package includes only the Heavy-Duty 80mm Suction Mount with a 1/4”-20 Mounting Bolt. The Heavy-Duty Suction Mount is ideal for car windshields. This tough, low-vibration pedestal measures approximately 6.5 inches high from the bottom of the mount base to the top of the mount shaft (not including holder), and is made of a combination of plastic and glass fiber. It features an 80mm TPU suction base that works well in all climates. The arm of the pedestal swivels on both the top and the bottom, providing 360-degree rotation and the ultimate flexibility in positioning the camera at any angle. To install, simply clean the mounting area with the included alcohol pad to ensure an optimum grip, then set the pedestal and push down on the one-touch lever to engage the suction. Simply screw the camera’s 1/4”-20 mounting pattern onto the mount’s 1/4”-20 mounting bolt and position the mount and camera as needed by loosening or tightening the side adjustment knob.

• Mount is compatible with cameras having the 1/4 20 mounting pattern
• Tough, low vibration 80mm suction pedestal attaches with a one touch lever and maintains a super strong bond
• 2 year limited warranty

User questions & answers

Product description

Arkon’s CMP220 windshield camera car mount fits all small digital cameras with the standard 1/4”-20 camera pattern, including the Sony 4K, PowerShot A2500, and NEX-3NL/B, Fujifilm X-T1, Samsung NX1100 Smart, Olympus OM-D E-M1, Panasonic LUMIX, and Nikon COOLPIX. This mount includes Arkon’s Windshield Suction Pedestal with 8.5” Flexible Gooseneck, a 1/4”-20 camera adapter, and an adhesive disk for optional dashboard mounting. The DEHP-free PVC suction mount can be attached to the windshield, or mounted to the dashboard or other flat or slightly textured surfaces by using the included dashboard disk. The easy-to-use, one-touch lever keeps the mount in place. To install the camera, just screw it onto the mount and secure with the tightening ring. The mount’s swivel ball adapter head rotates 360° and works in conjunction with the 8.5” gooseneck to provide the ultimate flexibility in positioning the camera at any angle.

• Ideal for small digital cameras with the 1/4 inch 20 mounting pattern
• PVC windshield suction performs well in hot climates
• Swivel ball adapter head and 8.5 inch gooseneck provides flexibility for positioning the camera
• 2 year limited warranty

User questions & answers

Product description

Arkon’s MC2CCAM premium aluminum motorcycle handlebar camera mount is compatible with smaller digital cameras having the 1/4”-20 mounting pattern, such as the Sony Action Cam, Sony POV HD Flash Memory Camcorder, JVC ADIXXION 2, Contour+2, and ContourROAM2. This mount package includes the Premium Motorcycle Handlebar Camera Mount with 1/4”-20 mounting bolt. Available in chrome or black (see Arkon Model MC2BCAM) finishes, the mount is made of aluminum and features a minimal but solid design. The mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter and is easy to install with the included hex key. (Three handlebar spacer/adapter rings of different widths are also included with the mount. Choose the appropriate size for optimum mounting to your handlebar.) Simply screw the bottom of your action camera onto the 1/4”-20 mounting bolt, and you’re ready to take photos or videos on your ride. The mount swivels 360 degrees to position the camera to your liking. To use the mount with a Garmin GPS device, Arkon recommends Model MC2C. Or, couple the mount with a water-resistant case for smartphones or GPS devices with Model MC2C5WPCS. For use of the mount with Arkon universal smartphone and tablet holders with the Dual-T configuration, Arkon recommends Model MC2CSBH.

• Mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter
• Made of aluminum and is easy to install
• Designed for use with 1/4”-20 compatible action cameras
• 2 year limited warranty

Product description

Arkon’s MC2BCAM premium aluminum motorcycle handlebar camera mount is compatible with smaller digital cameras having the 1/4”-20 mounting pattern, such as the Sony Action Cam, Sony POV HD Flash Memory Camcorder, JVC ADIXXION 2, Contour+2, and ContourROAM2. This mount package includes the Premium Motorcycle Handlebar Camera Mount with 1/4”-20 mounting bolt. Available in black or chrome (see Arkon Model MC2CCAM) finishes, the mount is made of aluminum and features a minimal but solid design. The mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter and is easy to install with the included hex key. (Three handlebar spacer/adapter rings of different widths are also included with the mount. Choose the appropriate size for optimum mounting to your handlebar.) Simply screw the bottom of your action camera onto the 1/4”-20 mounting bolt, and you’re ready to take photos or videos on your ride. The mount swivels 360 degrees to position the camera to your liking. To use the mount with a Garmin GPS device, Arkon recommends Model MC2B. Or, couple the mount with a water-resistant case for smartphones or GPS devices with Model MC2B5WPCS. For use of the mount with Arkon universal smartphone and tablet holders with the Dual-T configuration, Arkon recommends Model MC2BSBH.

• Mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter
• Made of aluminum and is easy to install
• Designed for use with 1/4 20 compatible action cameras
• 2 year limited warranty

User questions & answers

Product description

Arkon’s CMPHD006 Heavy-Duty Aluminum Mount with 8” Multi-Angle Arm and 4-Hole AMPS Drill Base is designed for installations where mounting a camera to a wall or other flat solid surface (including car dashboards) is desired. The mount base uses a 4-Hole AMPS pattern to attach to the wall (screws are included) or other surface. (Formerly an industry standard, the 4-Hole AMPS pattern consists of four holes located in a rectangular pattern spaced at 30.17mm by 38.05mm, measured as the center-to-center distance between holes) CMPHD006 offers a 1/4”-20 mounting bolt for attaching compatible cameras, such as close-circuit television (CCTV) or security cameras, in-vehicle camera systems, POV cameras, point-and-shoot cameras, camcorders, or any device with a 1/4”-20 threaded mounting pattern. This mount includes Arkon’s Heavy-Duty Aluminum Mount with 8” Multi-Angle Arm and 4-Hole AMPS Drill Base. This sturdy 8”mount features three adjustment knobs at 2.5” intervals on the mount arm for easy positioning. Two additional 180° adjustment points at both the top and bottom of the mount provide additional flexibility in positioning the camera.

• For mounting a camera to a wall or other surface
• Mount uses 4 Hole AMPS pattern to attach to wall
• Multi angle mount arm features three adjustment knobs and two additional adjustment points provide 180 degree rotation
• 2 year limited warranty

User questions & answers

Product features

PRODUCT FEATURES

• Camera mounts to walls and other surfaces including car dashboard mount
• 8-inch multi-angle camera mount arm features three adjustment knobs and two additional adjustment points rotating 180 degrees

PRODUCT DETAILS

Arkon’s CMPHD006 Heavy-Duty Aluminum Camera Mount with 8 inch Multi-Angle Arm and 4-Hole AMPS Drill Base is designed for installing a camera to a wall or other surface (including car dashboards). The camera mount’s base uses a 4-Hole AMPS pattern to attach to the wall (screws are included) or other surface. (Formerly an industry standard, the 4-Hole AMPS pattern consists of four holes located in a rectangular pattern spaced at 1.188 inch by 1.813 inch (measured as the center-to-center distance between holes).

Product description

The GN079WD sticky suction mounting pedestal is compatible with Garmin nuvi 40, 50, 200, 2013, 24x5, and 25x5 Series devices, as well as Garmin nuvi 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T models. This mount package includes only the Sticky Suction Mounting Pedestal with 3-inch articulating arm and 17mm ball head, and an optional 3M adhesive dashboard mounting disk. (The above listed Garmin nuvi devices should include a 17mm swivel ball-compatible holder; replacement holders sold separately.) Replace that tired old Garmin suction mount that always falls off with Arkon's new sticky suction mount. The Sticky Suction Mounting Pedestal is ideal for car dashboards, windshields, and other flat or slightly textured surfaces. The pedestal's base uses a powerful combination of polyurethane gel and suction to provide a maximum surface bond. The 3-inch articulating arm of the suction mount adjusts vertically and provides 360-degree rotation, providing flexibility in viewing the smartphone from any angle. To install, simply clean the mounting area with the included alcohol pad to ensure an optimum grip, then set the pedestal and push down on the one-touch lever to engage the suction. In order to prevent permanent indentation marks on dashboard surfaces made of soft vinyl, leather, or similar materials, Arkon recommends using the included 3M adhesive mounting disk. While powerfully strong, the sticky suction mount is also easily removable and reusable. If it has a drop in suction, just rinse the pad with a mild liquid soap and warm water, and then let air dry to restore the suction.

• Fits Garmin nuvi devices with 17mm swivel ball mounting pattern
• Sticky suction base provides a maximum surface bond on smooth surfaces
• Suction mount arm adjusts vertically and provides 360-degree rotation
• 2-year limited warranty from Arkon

User questions & answers

Product description

The AP020 90mm adhesive mounting disk allows you to mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the adhesive to cure before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 70mm disk to use with 60mm suction mounts, see Arkon Model AP036.

• Semi permanent adhesive mounting disc works with any 80mm windshield suction mounting pedestal for adhering to dashboards
• Compatible with Garmin and TomTom GPS mounting pedestals.Note that the disc is meant to be a bit larger than the mount to ensure a secure fit
• 2 year limited warranty

User questions & answers

Product features

PRODUCT FEATURES

• Extra-strength adhesive mounting disc adheres to dashboards and works with any 80mm suction mounting pedestal
• Compatible with Arkon CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T mounting pedestals

PRODUCT DETAILS

The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.)

Product description

Tightening ring and camera head adapter kit converts 17mm swivel ball pattern to 1/4"-20 threaded camera pattern. Converts Arkon GNxxx series mounts (sold separately) or Garmin Nuvi mounting pedestals (sold separately) for compatibility with digital cameras, camcorders, or sports cameras having the 1/4"-20 threaded female mounting pattern. Adapter only. Not a complete solution by itself.

• Converts your existing Garmin Nuvi mounting pedestal into one that can hold a camera having the 1/4"-20 threaded mounting pattern.
• Converts any Arkon GNxxx series mounting pedestal into one that can hold a camera having the 1/4"-20 threaded mounting pattern.
• Not a complete solution by itself. Requires being attached to a 17mm compatible mounting pedestal (sold separately)
• Compatible with Arkon GN010, GN014, GN015, GN016, GN018, GN022, GN033, GN042, CM088-G17, GN097 (all sold separately)

User questions & answers

Product description

The CM221 Universal Swivel Belt Clip Holder can be used to clip your smartphone, camera, AM/FM radio, walkie talkie, or remote control to your belt. This package includes Arkon’s easy-to-use universal belt clip with two adhesive button tabs. This small but effective belt clip keeps your phone handy while fitting comfortably on your belt or purse strap. Just affix the adhesive button tab to the back of your device, clip the holder onto your belt, and then slip the device’s button tab through the clip’s slot. The clip snaps into place and can be released with the spring-loaded button on the clip. The device swivels for convenience.

• Adhesive backed locking button tab affixes to phones, cameras, radios, walkie talkies, remote controls
• Tab snaps on to spring loaded belt clip
• Spring loaded belt clip allows phone to swivel

User questions & answers

Product description

The GN042 windshield suction car mounting pedestal is compatible with Garmin nuvi devices having the 17mm swivel ball mounting pattern, including models in the 40, 50, 200, 2013, 24x5, and 25x5 Series, as well as Garmin nuvi models 1450, 1450T, 1490T, 1200, 1250, 1260T, 1300, 1350, 1350T, 1370T, and 1390T. (The above listed Garmin nuvi devices should include a 17mm swivel-ball-compatible mount bracket; replacement brackets and holders sold separately.) This mount package includes Arkon’s Windshield Suction Mount with 8.5” Flexible Gooseneck. The windshield mounting pedestal features PVC suction and an 8.5” flexible gooseneck, which is ideal for placement on deep or slanted windshields. The windshield suction mounting pedestal provides 360° rotation, giving you the ultimate flexibility in viewing the Garmin GPS from any angle.

• Compatible with Garmin GPS devices with a 17mm ball mount base (brackets and holders sold separately)
• Mount features PVC suction and 8.5 inch flexible gooseneck
• 2 year limited warranty

User questions & answers