12 best dji tablet holders

• Aviation aluminum-alloy and high quality ABS made, CNC technology for impeccable smoothness. Perfect fit with DJI Mavic Mini 2 / DJI Mavic Air 2 / Mavic Mini / Mavic 2 Pro / Mavic 2 Zoom / Mavic Pro / Mavic Air / Platinum / DJI Spark Remote Controller.
• Support 4-12 inch Phone & Tablet, widely compatible with iPad Pro (Not Suitable for 12.9 inch), iPad Air 2/1, iPad Mini 4/3/2, Samsung Galaxy Tab S2/4/3/A, Nexus 9/7(wide up 4.72" only), Nivida Sheild K1 and most other tablets between 7 inch-12inch.
• 360° rotation and 45° up and down, offer a clean and good view, only 2 steps to snap on / off with no tools; foldable and iphone sized, light weight, convenient to carry outside with other Mavic/Spark accessories together.
• Supports hanging strap (included) & Tablet sunshade, perfectly solved the trouble that no place to hang a strap on Mavic/Spark controller, free your hands during flight; Tighten & Stable,will stay in the place you need.
• WHAT YOU GET - 1 x Tablet Bracket Mount, 1 x Shoulder Neck Strap; our worry-free 12-month warranty and 100% money back guarantee.

User questions & answers

Question:	Will this fit a Note 9 in an Otterbox
Answer:	The E3 CNC router could engrave on a pen. The E3 X and Y smallest step size is less than 0.001" or 80 steps per millimeter
Question:	Will these fit a Mavic Pro Platinum controller
Answer:	The E3 CNC router gantry height from the table is 3.3". The maximum height from the bottom of the DeWalt collet from the table is 4.5". Without a tool change you would be able to cut 1.2" into a 3.3" thick stock or cut all he way thru a 2.25" (or less) thick stock. With tool changes you would be able to cut thru a 3.3" thick stock.Calculations for answer.4.5" -3.3" = 1.2" bit available to cut4.5" = 2.25" of bit + 2.25" thick of stock.
Question:	can i use this for the dji spark controller
Answer:	The E3 CNC router DeWalt spindle comes with an 1/8" and 1/4" collects. Straight, vee, and rounded bits will all work. They need to have a 1/4" or 1/8" shaft size. Search Amazon for "1/8" in router bits" or "1/4" router bits" and select the bits for the material you plan to use. Small end mills will also work.
Question:	Is this going to work with Mavic mini controller
Answer:	The E3 is a CNC router that uses an Arduino microprocessor to interpret the g-code file. The firmware is called grbl ( is pre installed on the microprocessor and uses a USB port to receive serial port information (G-code) from software on the computer. I recommend UGS Universal G-code Sender Platform software to send the g-code text file to the controller. GRBL, and UGS use standard g-code text files to operate. Both have good documentation on their web sites showing their capabilities. There is definite a learning curve using computer controlled routers. G-code is a text file that has X,Y, and Z coordinate information. UGS sends these coordinates to GRBL which interprets this information and moves the machine. Also, just as note. Check out F-engrave and Scorchworks other products. This software creates the g-code files. This software can take pictures and turn them into g-code. Another good choice is NC Corrector which allows you to edit and graphically view the g-code. There are also program called stick font that makes text easy. Also, check out our quick start guide on our web page at BobsCNC.

Product features

Drone Compatible List

Our holder is a moblie phone and pad holder compatible for dji mavic air 2, mavic mini, mavic 2 pro/zoom, mavic pro, mavic air, platinum, dji spark remote controller

Cellphone and Tablet Compatible Lists

• Tablets: widely compatible with 4-12 inches Tablet monitors, such as iPad Pro (Not Suitable for 12.9 inch), iPad Air 2/1, iPad mini 4/3/2, Samsung Galaxy Tab S2/4/3/A, Nexus 9/7 (wide up 4.72" only) , Nivida Sheild K1 and 4-12 inches tablets of other brands.
• Smartphones: widely compatible with iPhone 7 Plus/7/6S Plus/6S/6Plus/6/5S, Galaxy Note 3/5/7, Samsung S7 Edge/S7/S6 Edge/S6, LG, Nexus, Huawei Mate/ P9 Plus and other 4.7 inch and 5.5 inch devices.

Product description

Specifications

Material: ABS

Applicable models:for DJI Mini 2/ Mavic Air 2/Mavic Mini/Mavic 2/Mavic Air/Mavic Pro/Spark

Color:black

Weight:9.17oz

Package Includes:1*Tablet Mount Holder

• Compatible with DJI mini 2/Mavic Air 2/Mavic Mini/Mavic 2/Mavic Air/Mavic Pro/Spark
• Compatible with 4-12 inches smartphones and tablets，such as iPad Air 2/1, iPad Mini 4/3/2, Samsung Galaxy Tab S2/4/3/A, Nexus 9/7(wide up 4.72" only), Nivida Sheild K1.
• Aluminum alloy and ABS plastic material made，Aluminum alloy bottom plate, durable and longer service life.
• 360° free rotation and 45° up and down, flexible height adjustment.
• 365 days warranty, free return or refund.

User questions & answers

Question:	Is it working for DJI mini
Answer:	Yes, it can engrave medals, but need to make sure the surface is flat. Support soft aluminum and Zinc-Iron.
Question:	Will this hold a Galaxy Tab S7+ (the big tablet
Answer:	yes, be sure to calculate speeds and feeds
Question:	Will this work for the snaptain sp
Answer:	It dosen't appear that amazon offers this for sale from SainSmart, but SainSmart does has them for sale on their website.
Question:	Is there a lanyard that works well with this product
Answer:	yes

Product description

This SKYREAT mavic stand holder can hold Most of phone & tablet from 4 inch to 11 inch( NOTE:NOT include 12 inch Ipad pro),Support 45 degrees to up and down,offer a very clean and good view.The height is 7cm from bottom to the clip,Will not too tall to effect view,neither too low to touch hand.

Very easy to install,no need any tools,Foldable design,Iphone size and only about 200g, include a storage bag in the package,it will very convenience to carry outside.

It is made of Aviation Aluminum-Alloy,it's very stable and not have any sharking when using,The tablet clip is made of ABS plastics,Very tight to hold the phone & tablet.Of course ,the soft plastic can protect the phone&tablet not be damage.

• Aviation aluminum-alloy material made, CNC technology, High quality design accessories perfect fit with DJI mavic air 2 / mavic mini / mavic 2 Pro/ mavic 2 Zoom/ mavic air/ mavic pro/ Platinum/ DJI spark remote controller
• 120Mm-190mm wide support 4-11 inch phone & Tablet(NOT include 12 inch Ipad pro),45 degrees to up and down support a clean view, tighten & stable, will stay in the place you need
• Foldable and iPhone sized.Light weight, only about 227G, convenience to carry outside with other mavic accessories together.
• Just need 2 step to snap on/ off with no tools
• Support tablet sunshade & hanging lanyard.(Lanyard not Include)

User questions & answers

Question:	Is there a clip location for a lanyard
Answer:	The otterbox adds more depth to the phone. I had to use a dremel tool to cut a notch so the cord doesn't get stressed in the phone when plugged in. It should fit the phone fine, as it opens fairly wide. I use an iPhone 7 in mine.
Question:	Would this fit the galaxy tab s2 (9.7in
Answer:	Yes. The controller is the same as the Mavic Pro therefore it will fit.
Question:	Will this work with the iPad mini
Answer:	This is for the Mavic Pro, if the dimensions of the Spark controller is about the same then your good.
Question:	Will this work with the large 12.9" iPad Pro
Answer:	Yes it will work with the mavic mini. I purchased it for that exact reason. Have fun and safe flying.

• Fit with DJI Mini 2, Mavic 2 Pro / Mavic 2 Zoom / Mavic Mini / Mavic Air / Mavic Air 2 / Pro / Spark Remote Controller
• Support 130-190mm (5.1- 7.5 inch) Width Phone & Tablet, widely compatible with iPad Pro 11-inch without case (Not Suitable for 12.9 inch), iPad Air 2/1, iPad Mini 4/3/2, Samsung Galaxy Tab S2/4/3/A, Nexus 9/7.
• PGYTECH Pad holder doesn't come with the longer cable. If your controller doesn't have USB Port, you may need a longer cable.
• 360 Degree Adjustable and CNC-Finished Edges: Flexible design arbitrary rotation with light weight design(5 oz); Sleek, elegant curves along the edges of the aluminum casing
• What you get: 1 x Table Holder, worry-free 12-month warranty and friendly customer service.

Product features

PGYTECH Pad Holder

Fit Mavic Air 2 Controller

Drone Compatible List

Tablet Compatible List

PAD Holder (standard version) is a mobile phone and Pad (7" to 10") holder suitable for DJI Mavic Mini, Mavic Pro 2, Mavic 2 Zoom Mavic Air, Mavic Pro, and Spark remote control. It is 360 degrees freely adjustable; it has flexible EVA Sponge on both sides of the splint, effectively preventing slips and scratches on the devices; the support arm is made of aviation CNC aluminum, using an anodizing process for the coloring. The ABS base is lightweight and firm, adaptable, and easy to use. The PAD holder allows you to enjoy the control of your flight on a large screen and it can be used as a desktop pad stand.

• 【Compatible】：This tablet stand can be compatible with DJI Mavic Mini 2/Mavic Mini/Mavic Air 2/Mavic 2 Pro/Zoom/Spark Remote Controller.
• 【Applicable size】：Support 4-12 inch Width Phone & Tablet, widely compatible with iPad Pro，iPad Air，iPad and other mobile phone tablets within the size.
• 【Perfect integration】: The convex design and the groove of the remote control are perfectly combined, which is firm and stable, and will not slide at will even if an overweight tablet is installed.
• 【360 Degree Adjustable】：Flexible design arbitrary rotation with light weight design,installation and disassembly are simple, no other tools are needed. "
• 【Lightweight and convenient】: The package includes a lanyard, which can be hung around your neck during flight to free your hands; unfold it on the table, and it can be used as an ordinary flat support.

• [Aluminum Alloy Bracket] Make of Aluminum and high-quality ABS material Perfect fit with DJI Mavic Air / Mavic Pro / Mavic/ DJI Spark /Mini / Mavic Air 2 / Mini 2 Remote Controller
• [Clever Design] Foldable design for convenient storage with adjustable view angle according to personal needs
• [Multiple Applications]For smartphone stretchable length: about 54-83mm ,Suitable forFor No More Than 3.2 Inch Width Smartphone;For tablet stretchable length: about 110-190mm ,suitable for For No More Than 7.3inch Width Tablet/iPad;Compatible with iPhone X/8/7/6 iPad mini iPad 2/3/4, Samsung Galaxy Tab A 8"and so on.
• [Additional Functions]Using as normal table holder and enjoy your time with large screen tablet,it is also suitable for Crystal Sky Monitor
• [Hollow-carved Design] Light weight could be convenient for your operation

User questions & answers

Question:	Will this hold an ipad Pro
Answer:	Yes ,it working for DJI mini
Question:	How tight are the hinges when holding a device? Can you adjust the torque
Answer:	I have an iPad Pro which is probably close to the same size and weight. The holder broke while using it the first day I had it.
Question:	Does it have a 1/4 20 threaded hole on the bottom so that I can mount it to a tripod
Answer:	It can not work for the snaptain sp500. Because the tablet holder needs to be installed on the remote control, but the remote control of snaptain sp500 does not have a suitable place to install it.
Question:	will this item work with Mavic
Answer:	I am sure there is ... or ... make your own.

Product features

Aluminum Foldable Tablet Stand Holder for Aluminum Foldable Tablet Stand Holder

Aluminum Alloy Bracket Foldable Design for Convenient Storage Stable Support No Shaking

CNC Proccessing Anodizing Treatment

Arc Design Fitting Remote Controller

Q:Does this work with 12.9" iPad Pro?

A:No,it just For No More Than 7.3inch Width Tablet/iPad Q:Will this hold a samsung galaxy note 8?

A:Yes,it can hold the note 8

Q::Will this work with an iPad Air 2?

A:Yes,it can hold the iPad Air 2

Hollow-carved Design

Reduce weight

Easy to hold and play

Foldable Design

Foldable design for convenient storage

Aluminum alloy bracket

Stable support and no shaking

CNC Processing

CNC processing

Anodizing treatment

3 IN1 Multiple applications

1.For Smartphone: the stretcable length is about 54mm - 83mm

2.For Tablet : the stretcable length is about 110mm - 190mm

3.For DJI Crystal Sky Monitor

Adjustable View Angle

Adjust the angle according to personal needs

Additional Function

Enjoyable function

Using as normal tablet holder

Enjoy your time with large screen tablet

• Premium Material:aluminum-alloy and high quality ABS made. Perfect fit with DJI Mavic MINI,Mavic 2 Pro/ Mavic 2 zoom/ Mavic Air/ Mavic Pro/ Platinum/ DJI Spark remote controller. Free Neck Strap
• SUITABLE TABLET & PHONE: 4-11 inches tablet or phone.Widely compatible with iPad Pro 9.7"/10.5"/11"(Not for 12.9"), iPad Air 3/2/1(9.7"/10.5"), iPad Mini 4/3/2(7.9"), Samsung Galaxy Tab S2/4/3/A, Nexus 9, Nivida Sheild K1 and other tablets smaller than 11 inch.Some tablets or phones need to make some adjustment from horizontal to vertical and have a rotation.
• Specially Design:Hollow design lightweight aluminum base, with bottom non-slip design. Light weight,only about 159g.High-quality ABS plastic bracket can hold tablet firmly
• Flexible and Adjustable:360° rotation and 45° up and down, offer a clean and good view, only 2 steps to snap on/ off with no tools; foldable and iPhone sized.
• WHAT YOU GET: 1 x Remote controller Tablet holder, 1 x Neck Lanyard Strap. Our worry-free 12-month warranty and 100% money back guarantee

User questions & answers

Question:	Can i use this for zlrc sg 906 drone rc
Answer:	IT DOES NOT FIT IPAD 12.9 - almost doesn't count.

Product features

Wide Compatibility:

• This tablet holder is compatible with 4-11 inch mobile phones and tablets.
• The clamp extends from 120 mm to 191 mm(4.72-7.52 inch)

NOTE:

• Not suitable for 12.9" ipad Pro
• The clip needs to be placed horizontally when phone is clipped. Some phones are placed horizontally, not in the middle of remote control, and the position is a bit biased.

• Designed for mavic air 2/ mini 2, also fits the Mavic Series remote controller.
• Improved Details 1 The height is slightly adjusted so that the tablet doesn't touch your hand when it's tilted at 45 degrees.
• Improved Details 2 The base width adjustment and the design of the double buckle allows for a very secure grip on the remote. No need to worry about dropping your precious tablet.
• Full Aluminum Alloy Bracket and Holder]Make of full aluminum and high-quality ABS material
• Foldable storage and easy to carry. 1 x Tablet Holder,1 x Lanyard

• 【Compatible Remote】Compatible with DJI Mavic Mini 2 / Mavic Air 2 / Mavic Pro / Mavic 2 Pro / Mavic 2 Zoom DJI Spark and Mavic Air Remote Controller.
• 【Aluminum Alloy Bracket】 Replace the Loose Plastic, the Aluminum Shaft Locks the Tablet Mount in Place Securely. Please order the date cable by this link: https://www.amazon.com/dp/B08L272JNH
• 【Compact Design】Foldable Design for Convenient Storage and Transport; With 2 Adjustable Shaft, to Maximize Adjusting the View Angle According to Personal Preference..
• 【Compatible Phone/Tablet】For No More Than 3.14 Inch Width Smartphone; For No More Than 7inch Width Tablet/iPad.Compatible with iPhone X/8/7/6 iPad mini iPad 2/3/4, Samsung Galaxy Tab A 8"and so on.
• 【Additional Functions】Using as normal table holder and enjoy your time with large screen tablet,it is also suitable for Crystal Sky Monitor.

User questions & answers

Question:	Would this mount work for an Autel evo drone controller
Answer:	Yeah, it could be work wih Mavic 2. It can also work with Mavic air / Mavic pro / DJI Spark Would these be helpful to you. Customer Service Team Thriverline
Question:	will this work with an Ipad 9.5 with a case
Answer:	no clip location for a lanyard. This mount only fits into where you would normally put your phone in. however I found out that it does work very well to hold an ipad mini 2 and is very adjustable to hold it away from the controls on the Mavic controller.
Question:	Is the base also threaded for a tripod mount
Answer:	I'm fairly certain it would. I have it on a Lenovo Tab 2 A10 and it fits fine. The dimensions on the Lenovo are 9.72 x 6.73. Good luck!
Question:	i have mavic 2 pro and am trying to accommodate ipad pro 12.9 inch ( 8.5 inch x 11 inch ). would this accommodate my ipad
Answer:	Yes it works. But doesn't work for my iPad Pro. In the description said: "Aluminum-Alloy 4-12 Inches Tablet Mount Holder"... but see the figure that contain de dimension

Product features

A Must Have Accessories if You Want to Use Tablet or iPad on Your Mavic Mini / Mavic Pro / Mavic 2 Pro Spark Drone Remote Controller.

Specifications:

Material: Aluminum + High-quality ABS

Size: 7.87 * 3.93 * 2.75 inch / 20.0 * 10.0 * 7.0 cm

Weight: 0.88 lb / 0.4kg

Color: Silver

Arc Design Fitting Remote Controller Hollow-carved Design Reduce Weight Easy to Hold and Play.

Demountable Design

• Allow you to quickly release and install the tablet mount with the 1/4 screw.
• Convenient when you want to switch phone device or tablet device and Crystal Sky.
• Installation/removal: Press the button on the hot shoe and push in/out the adapter with the cold shoe;

Tightness of Joints Are Adjustable

• Upgrade version retractable screw, when the bracket installed tablet and the screw is blocked by tablet, you can directly pull out the screw and bypass the obstruction, continue to rotate the fixing screw by bypassing the obstruction.
• Use the screw wrench which along the products to lock or loose the hexagonal screw to adjust the angle of the controller tablet mount

Foldable and Compact Size

• We suggest fold the remote tablet mount as the picture shows.
• Aluminum Alloy Bracket Foldable Design for Convenient Storage Stable Support. Easy to Carry.

Adjust the angle to your preferences

Adjustable View Angle Adjust the Angle Accoring to Personal Needs CNC Proccessing Anodizing Treatment

With A neck strap to reduce the heavy burdens of tablet

Free with a neck lanyard,Reduce the Heavy Burdens of Tablet,Cellphone,CrystalSky Monitor from Your Hands Without Long Time Holding The Controller.

DJI controller multi-function bracket

DJI controller multi-function bracket Compatible with DJI Mavic Mini Mavic Pro Mavic 2 Pro Spark or Mavic Air Drone Remote Controller,Crystal-Sky Monitor and Smart phone,tablet; Fold-able and easy to replace different intelligent terminal display device.

• Premium Material:aluminum-alloy and high quality ABS made. Perfect fit with DJI Mavic MINI,Mavic 2 Pro/ Mavic 2 zoom/ Mavic Air/ Mavic Pro/ Platinum/ DJI Spark remote controller. It is equipped with a lanyard and 2 nuts with different materials (1 plastic +1 aluminum alloy). The double nut solves the problem of long-term durability of the holder caused by the nut.
• SUITABLE TABLET & PHONE: 4-11 inches tablet or phone.Widely compatible with iPad Pro 9.7"/10.5"/11"(Not for 12.9"), iPad Air 3/2/1(9.7"/10.5"), iPad Mini 4/3/2(7.9"), Samsung Galaxy Tab S2/4/3/A, Nexus 9, Nivida Sheild K1 and other tablets smaller than 11 inch.Some tablets or phones need to make some adjustment from horizontal to vertical and have a rotation.
• Specially Design:Hollow design lightweight aluminum base, with bottom non-slip design. Light weight,only about 159g.High-quality ABS plastic bracket can hold tablet firmly
• Flexible and Adjustable:360° rotation and 45° up and down, offer a clean and good view, only 2 steps to snap on/ off with no tools; foldable and iPhone sized.
• WHAT YOU GET: 1 x Remote controller Tablet holder(Comes with 2 nuts:aluminum alloy nut x1,plastic nut x1), 1 x Neck Lanyard Strap. Our worry-free 12-month warranty and 100% money back guarantee

User questions & answers

Question:	Will this pivot 90 degrees so that it can clamp device from the sides
Answer:	I use it on the SG906 pro so yes
Question:	Will this fit a Hubsan Zino controller and 10 in Ipad
Answer:	I have the 9.7- inch iPad Pro and it barely fits it so I don’t think it would fit the 11-inch iPad Pro. But it works nice it’s a good product.
Question:	will an iphone in an otter case fit
Answer:	Yes, you could adjust the torque according to your requirement. Customer Service Team Thriverline
Question:	With an ipad mini and a dji mavic mini, are you able to use the stock dji lightning cable or did you have to buy a longer cable
Answer:	Yes

• [Full Aluminum Alloy Bracket and Holder] Make of full aluminum and high-quality ABS material Perfect fit with DJI Mavic Air / Mavic Pro / Mavic 2/ DJI Spark / Mavic Air 2 / Mavic Mini 2 Remote Controller
• [Foldable Design] Foldable design for convenient storage with adjustable view angle according to personal needs
• [Multiple Applications]Stretchable design for smartphone / tablet, stretchable length:115mm（4.5in）-180mm(7.1in), adjustable bracket to be horizontal for smartphone and vertical tablet
• [Additional Functions]Using as normal table holder and enjoy your time with large screen tablet,it is also suitable for Crystal Sky Monitor
• [Hollow-carved Design] Light weight could be convenient for your operation,reduce weight only weighs 225g

User questions & answers

Question:	Does this work for the Bugs 4W too
Answer:	no clue. if it has the same grip as the Mavic then it should
Question:	Will this unit work with the Contixo F22 controller
Answer:	No
Question:	Please, open the option to sell this item to Brazil
Answer:	It is not threaded for a tripod mount
Question:	Will this work with an ipad Pro 11inch
Answer:	I believe it should work fine but you should confirm with the Seller.

Product features

Full Aluminum-Alloy Design

Compatible for DJI Mavic Air / Mavic Pro / Mavic 2/ Zoom / Mavic Mini / DJI Spark/Mavic Air 2/ Mavic Mini 2 Remote Controller

Material: Aluminum

Weight:225g

Color:Red

Foldable Design

Foldable design for convenient storage

Stable support and no shaking

Angle Adjustable

Adjustable view angle

Adjust the angle according to personal need

1/4 Screw

Compatible with 1/4 smartphone / tablet holder on the market

Special Design for Your Data Line

Reserved hole for data line for your convenient using

Easy to install and say not to plastic loose shaking tablet mount

Package List

1 x Aluminum-Alloy Bracket

1 x Aluminum-Alloy Holder

1 x Tool kits

1 x Crystal Sky Monitor Holder

1 x Strap

1 x Storage Bag

2 x Screws

• Thicker Metal, Made of premium aluminum alloy,The base is extra wide for a more secure grip on the tablet. Also we designed a double clasp to clip the remote control, which will be more stable.
• Multi-Angle adjustment,Support 180° degrees to up and down,the height is 7cm from bottom to the clip,will not too tall to effect view,neither too low to touch hand.offer better posture and eyelevel view
• Premium Aluminum-alloy Made, CNC technology, High quality design accessories perfect for dji mini 2,mavic air 2 remote controller.the full base and nut are made of metal, not plastic.The clamp is made of high quality ABS plastics.It's more stable and durable.
• Fully Foldable Tablet Holder, This mavic air 2 tablet stand holder is collapsible that can be fully folded,takes up little space when storage, allows you to completely free your hands and carry it along when in traveling.
• 120Mm-190mm wide support 4-11 inch phone & Tablet(NOT include 12 inch Ipad pro) you will get 1 x Tablet Bracket Mount, 1 x Shoulder Neck Strap

User questions & answers

Question:	Will this work with the 11" samsung galaxy tab s
Answer:	Yes. The clamp is detachable. It rotates 360
Question:	Will this work with iPad Pro 11 inch
Answer:	It works fine with the 9/7" iPad
Question:	Do you notice any decrease in range? Seems a big metal tablet (in the case of an iPad) right in front of the antennas might block some signal
Answer:	Otter case is too thick and will not fit in it! I have otter case and had to remove it first to use this holder
Question:	Can you use a sun hood/shade with this
Answer:	you need to buy a longer cable

Product features

Multi-Angle adjustment.

With two metal foldable hook, More stable,Will not fall off.

Will not interfere with joysticks when using the big size tablet.