12 best cordless routers

Product description

The 20V max XR Cordless compact router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LED lights help to illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base Change.

• Dual LED lights help illuminate the work surface
• Depth adjustment ring allows for fast and easy height adjustments
• Electronic brake slows the motor down faster after the unit is shut off; Speed 16,000 to 25,500 rpm
• Variable speed dial allows the user to match speed of the router to the application
• Soft start motor with full time electronic feedback allows the motor to maintain speed during cuts

User questions & answers

Question:	What's the equivalent HP? 1.25 or greater
Answer:	1.25HP
Question:	which batteries work with this tool? are they compatible with any stanley / porter cable / black+decker batteries
Answer:	The DCW600B is compatible with the DEWALT 20V battery line. It is not compatible with any other Brand.
Question:	Can you use a flexvolt battery with this
Answer:	Yes. I tried it and works fine with flex volt batteries.
Question:	Can it use 1/4 in bits
Answer:	Yes, we recommend using only 1/4" bits with the DCW600B.

Product description

The M18 Fuel Compact Router combines power, speed and accurate depth adjustments to deliver clean accurate cuts in a variety of materials and applications. The compact router leverages our Powerstate Brushless Motor and Redlink Plus electronics. This delivers the power of corded 1.25 horsepower trim routers and best-in-class 31,000 RPM providing you with power and speed for clean, quality cuts in hard materials.

Compact and Portable

With the M18 Redlithium XC5.0 battery, the cordless compact router cuts up to 250 feet of 3/8-inch roundovers in red-oak, providing you with all-day run time with fewer trips to the charger.

Versatile

The handheld router is equipped with a micro-adjust dial and macro-adjust button, providing you with fast and accurate depth adjustments for highly accurate work. A variable-speed dial with speed from 10,000 to 31,000 RPM gives you control in all applications.

Features

The compact router also features a sturdy 4-inch sub-base plate providing you with stability, and dual-LED lights illuminate your work surface. The M18 FUEL Compact Router is compatible with a plunge base and an offset base (sold separately).

• POWERSTATE BRUSHLESS MOTOR: Power of corded compact routers and higher SPM to complete cuts in hardwoods
• PERFORMANCE: Redlink Plus intelligence ensures maximum performance and protects from overloads, heating and over-discharge. Variable speed dial ranges between 10,000 and 31,000 rpm, providing precise control for clean edges and details
• ADJUSTMENTS: Macro Adjust button allows for fast macro-adjustments and 1.5-inch of adjustable range. Fine adjustment screw allows for precise adjustments beyond 1/64-inch increments
• COMPATIBILITY: Compatible with Milwaukee Plunge base and Offset base attachments (sold separately)
• MILWAUKEE AUTHORIZED DEALER: Includes USA Manufacturer Warranty

User questions & answers

Question:	se debe comprar por separado las baterias y el cargador de baterias
Answer:	Si no incluye cargador ni batería pero es una buena herramienta se lo recomiendo 👌
Question:	Will the router base work with guide bushings
Answer:	It comes with a second, larger base and that one will accept a guide bushing.
Question:	is it possible to use bits with a shank of a larger diameter? Need to use 8mm shank
Answer:	No it is only a 1/4" shank router.
Question:	where is it made
Answer:	China

Product description

Corded power meets cordless convenience with the 18V Brushless Compact Router (model XTR01T7, tool only, batteries and charger sold separately). The 18V LXT Router has an efficient Makita BL Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It is compatible with Makita 18V LXT Lithium-Ion batteries (sold separately). The XTR01Z is engineered for a full range of cabinetry and woodworking applications. It has a variable speed control dial (10,000 – 30,000) RPM) to match the speed to the application, with electronic speed control to maintain constant speed under load and soft start feature for smoother startups and better accuracy. Convenience features include the smooth rack-and-pinion fine depth adjustment system for more precise settings, dual L.E.D. lights to illuminate the work surface, and a quick release cam lock system for convenient depth adjustments and base removal/installation. Additional bases and attachments are available (sold separately). For users of corded Makita Compact Routers (models RT0700C, RT0701C), the bases used with these corded routers are fully compatible with the XTR01Z. In addition, the XTR01Z easily connects to Makita vacuum cleaners with the optional dust nozzle for improved dust extraction. It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside. Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating.

• Makita built Brushless motor delivers faster and more accurate cuts in a variety of materials
• The electronically controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
• Variable speed control dial (10,000 to 30,000 RPM) to match the speed to the application
• Electronic speed control maintains constant speed under load
• On/off button with separate lock button helps prevent accidental startup of the tool for user and work piece protection

User questions & answers

Question:	I see people mentioning old batteries and small batteries but no models. What exact model battery should I be buying for this
Answer:	This trim router works great with the 2 Ah battery. I wouldn't go with anything more unless you like a lot of top heavy weight. The 2 Ah battery makes it a pleasure to use and will easily last as long as it takes to charge your spare. The reason you are buying this is for light weight and convenience. Don't make it heavy and bulky with a big battery. I use the BL1820B battery with this router for edge trimming and other light duty tasks. If you need run it all day long making large cuts, buy a bigger router.
Question:	What Makita part number no i need to order to get the dust extraction shroud for use with the fixed (non-plunge) base
Answer:	see if this helps: 1. Trimmer Guide (122703-7) 2. Tilt Base (195561-4) 3. Offset Base (195562-2) 4. Dust Nozzle - Fixed Base (195559-1) 5. 18V X2 LXT® (36V) HEPA Filter Dry Dust Extractor/Vacuum (XCV04Z)
Question:	Why two wrenches? Also why is there extra collet nut things? Thanks
Answer:	You can either use the button and one wrench or two wrenches. With two wrenches you can get a tighter nut. This can help with certain bits to avoid chatter. If you don't have great hand strength, two wrenches are definitely better. The extra collet is for a different size router bit shank (3/8") which is rare, but my dovetail jig router bit is 3/8" This means I could use this router with that jig. Otherwise I'd have to use a 1/2" shank router with an adapter.
Question:	Can the wired accessories to the cordless be interchangeable
Answer:	I have the corded router, the cordless router and the plunge base that came bundled with the corded model. The plunge base does in fact mount on the cordless router identically. That's all I can confirm for certain, but the two models appear to be machined the same (though the battery compartment does hang out farther from center, interphering with the full extension of the plunge base depth guide bolt, but only at the extreme of the bolt's capacity - if that is explained well)

Product features

Makita XTR01Z 18V LXT Lithium-Ion Brushless Cordless Compact Router, Tool Only

Corded power meets cordless convenience with the 18V LXT Brushless Compact Router (model XTR01Z, tool only, batteries and charger sold separately). The 18V LXT Router has an efficient Makita BL Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It is compatible with Makita 18V LXT Lithium-Ion batteries (sold separately).

Product description

Corded power meets cordless convenience with the 18V LXT Brushless Compact Router Kit, model XTR01. The 18V LXT Router has an efficient Makita BL Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. The kit includes an efficient 18V LXT 5. 0Ah battery, which reaches a full charge in only 45 minutes – the fastest charge-time in the category – for less downtime and increased productivity. The XTR01 Router is engineered for a full range of cabinetry and woodworking applications. It has a variable speed control dial (10, 000 – 30, 000) RPM) to match the speed to the application, with electronic speed control to maintain constant speed under load and soft start feature for smoother start-ups and better accuracy. Convenience features include the smooth rack-and-pinion fine depth adjustment system for more precise settings, dual L. E. D. lights to illuminate the work surface, and a quick release cam lock system for convenient depth adjustments and base removal/installation. The kit includes a fixed base, straight guide, rapid charger, one battery, case, and foam insert for case, and additional bases and attachments are available (sold separately). For users of corded Makita Compact Routers (models RT0700C, RT0701C), the bases used with these corded routers are fully compatible with the XTR01. In addition, the Router easily connects to Makita vacuum cleaners with the optional dust nozzle for improved dust extraction. It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls . Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

• Starter kit includes fixed base, straight guide, Rapid charger, one battery and case
• Lxt technology delivers 380 feet of cutting performance in red Oak using a 1/4" (6mm) straight bit at a 5/32" (4mm) Depth with a 5. 0Ah battery
• Makita-built Brushless motor delivers faster and more accurate cuts in a variety of materials
• The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
• Variable speed control dial (10, 000 - 30, 000 RPM) to match the speed to the application

User questions & answers

Question:	Does it come with 1 or 2 batteries
Answer:	1 battery ...It would be nice if a second battery was included .
Question:	batteries included or
Answer:	1
Question:	can I use 1/2 Inch Shank
Answer:	No, 1/4” only
Question:	can i purchase a case only for my cordless router
Answer:	Sorry I don’t know. My guess is you’d need to go to makita’s website and order one directly

Product features

Makita XTR01T8J 18V LXT Lithium-Ion Brushless Cordless Compact Router Kit (5.0Ah)

Corded power meets cordless convenience with the 18V LXT Brushless Compact Router Kit, model XTR01T8J. The 18V LXT Router has an efficient Makita BL Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. The kit includes two efficient 18V LXT 5.0Ah batteries, and each reaches a full charge in only 45 minutes – the fastest charge-time in the category – for less downtime and increased productivity.

Product description

The Makita Plunge Base Set (196094-2) is an ideal accessory for Makita's line of compact routers, their 18V LXT Lithium‑Ion Brushless Cordless model XTR01Z and their 1‑1/4 HP Corded model, RT0701C. The Plunge Base features a plunge capacity range of 0 in. to 1-3/8 in. for easy penetration into the work piece. The fine depth adjustment has three preset depth stops for added precision. For added versatility, the Makita Plunge Base accepts industry standard template guides.

• Plunge depth capacity of 1" to 1-3/8" for easy penetration into work piece
• Easy-to-use fine depth adjustment with 3 preset depth stops for added precision
• Conveniently located plunge lock lever for operator convenience
• Removable clear plastic shield engineered to block airborne debris
• Sub-base accepts industry standard template guides for added versatility

User questions & answers

Question:	Will this fit a Craftsman router
Answer:	No, this only fits the makita trim routers
Question:	Does this fit the rf1101 makita router
Answer:	No this is for the MUCH smaller 1/4" handheld trim router RT0700c. The RF1101 is a full sized 1/2 inch router.
Question:	Does this base work with the battery powered Makita router
Answer:	Yes it does.
Question:	Does anyone have/know of a dust nozzle that fits this
Answer:	Makita does: https://www.makitatools.com/products/details/194733-8

Product description

EXPAND YOUR SYSTEM with the 20V MAX XR Woodworking 2-Tool Combo Kit. It includes an XR Brushless Cordless Compact Router and Jig Saw. This kit also includes one 20V MAX XR 5.0Ah Battery and an 8 Amp Fast Charger with 2X the charge rate (vs. DCB115).

• DCW600: MATCH SPEED of the router to the application with variable-speed dial
• DCW600: FAST AND EASY height adjustments with depth-adjustment ring
• DCW600: MOTOR SLOWS DOWN FASTER with the electronic brake after the unit is shut off
• DCS334: PROVIDES CONTROL of cut quality and speed with 4-position orbit action
• DCS334: PRECISE SPEED CONTROL with variable speed trigger and dial

Product features

About Us

Raymond E. DEWALT followed in his father's steps, and worked in plants and construction after leaving school. In all fields of work he encountered the issue of high labour costs. To help reduce these costs, whenever possible he installed a machine to handle specific needs.

One fine day, M. DEWALT was hired to head a wood mill, manufacturing numerous products, from basic boxes to complete houses. The amount of work exceeded the company's capacity by far, but its owner could not afford to increase the headcount. The only solution was to ensure his men produced more work. M. DEWALT built a yoke, which he connected directly to a motor and a saw. He then fitted it onto a standard arm. The saw could be raised, lowered, moved forward and backward, and adapted to all types of angles. With this system, he could handle the same amount of work as four men, reducing labor costs beyond his wildest imagination.

Product description

Makita's powerful 1-1/4 HP (maximum) Motor Delivers Improved Performance. The variable speed control dial (10,000 - 30,000 RPM) enables user to match the speed to the application. Our smooth rack-and-pinion fine depth adjustment system for more precise settings. It features a slim and ergonomically designed body for increased comfort and control. It has a Quick release cam lock system for easy depth adjustments and base removal/installation The Electronic speed control maintains constant speed under load. It also has a Soft start feature for smooth start-ups. The Fixed base accepts industry standard template guides for convenience. It has a high visibility base design for improved handling and the performance base can be removed quickly to install other bases. The Heavy duty aluminum motor housing engineered for increased durability. The shaft locks for quick and easy bit changes. Its durable flat top design is added for convenience when changing bits. It has a non-marring high-durability base insert for increased work piece protection. It also has Easy-to-read depth scales Uses 1/4" shank router bits Double insulated.

• Variable speed control dial (10,000 to 30,000 RPM) enables user to match the speed to the application
• Smooth rack and pinion fine depth adjustment system for more precise settings
• Slim and ergonomically designed body for increased comfort and control
• Quick release cam lock system for easy depth adjustments and base removal/installation
• Electronic speed control maintains constant speed under load
• Soft start feature for smooth start ups
• Fixed base accepts industry standard template guides for convenience

User questions & answers

Question:	can you set this up for a table router
Answer:	My short answer would be yes. I'm not sure whether there are commercially available tables for it, though. You may have to build one yourself.
Question:	What is the set of drill bits should I buy for this tool. I bought the MLCS 8377 15-Piece Router Bit Set with Carbide-Tipped 1/2-Inch Shanks and are n
Answer:	This is a 1/4" collet router. If you want to use 3/8" (new to me) or 1/2" get a 1/2" router. I've used routers for 45 years. Own a 1/4" and two 1/2" Here's a quick guide: 1/4" router is the most widely useful, can be held in one hand for quick work, your arm doesn't get tired as fast as with a larger router. This one is good for hinge guides and door installs, laminate trimming (laminate trim bits with bearings), round over of the edges of boards or plywood. Makes a neat no slivers edge, get 1/2", 3/4" diameter cove bits (these will make 1/4 and 3/8" from the edge curves) I get these with bearings as well. (If you want less of a curve, use less depth, the curve is not symmetrical--no one will care. This is what I usually grab my 1/4" router for (I've got a Porter Cable 1/4" that's 40 years old. Can't figure out how to take it apart to replace the cord. Rather than a $60 trip to the tool repair I'm thinking of this one, vacuum dust collection is a plus). Shelf dados, usually 1/2 to 3/4" wide, is best done with a more powerful 1/2" router, but you can get by with this with two passes (overlapping) of a 1/2" straight bit. Plunge routing: always use dust collection. Freehand scroll work: 1/8 or 1/4" round bits- I don't do this, others do. If you don't yet have a router, or a specific shop need, get a 1/4". If you think you need one of those $400 router tables: don't. Make your own or buy a jointer. Figuring out how to make a router table will teach you about making jigs (you can make a fence that has finer adjustment than the fanciest most expensive one on the market) Direction of working. There's a correct direction to running a router along the edge of a board. With plywood, pine, fir, spruce, etc.. going the correct way can rip out long splinters. If you first make a very shallow pass in the 'wrong' direction to knock off the edge, then go normal depth in the correct direction, you can avoid this. (I still don't know if I want this router or not. There were 6 opened and reclosed boxes (returns?) at the Home Depot. Why?)
Question:	can it be used for wood doors and frames for hinges
Answer:	Yes, but it is a much better used as router than a door or frame hinge.
Question:	Can I trim my toe nails with it
Answer:	I definitely would use a flush trim bit. A round over or rabbiting bit might be too much. IMO

Product features

Versatile Kit

The 1-1/4 HP Compact Router Kit (model RT0701CX7) delivers performance, versatility and precision in a compact size. With a full 1-1/4 maximum horsepower and a plunge base included in the kit, the RT0701CX7 is engineered for a full range of precision routing applications.

The RT0701CX7 has a powerful 1-1/4 HP (maximum horsepower) motor with a variable speed control dial (10,000-30,000 RPM) that enables the user to match the speed to the application. Additional performance features include electronic speed control to maintain constant speed under load, and soft start feature for smooth start-ups. The RT0701CX7 is double-insulated with a heavy-duty aluminum motor housing for increased durability.

The RT0701CX7 is engineered for precision and includes a smooth rack-and-pinion fine depth adjustment system and easy-to-read depth scales for more precise settings. The quick release cam lock system is designed for easy depth adjustments and base removal/installation, with a high-visibility base design for improved handling and performance.

Additional features include a slim and ergonomic design that weighs only 3.9 lbs., with a durable flat top design for added convenience when changing bits. The base can be removed quickly to install other bases, and the shaft lock is engineered for quick and easy bit changes (uses ¼” shank router bits).

Includes:

The kit includes a plunge base needed for a range of routing applications. The plunge base has a full 0” – 1-3/8” plunge depth capacity, and an easy-to-use fine depth adjustment with 3 preset depth stops. The router accepts industry standard template guides for added versatility.

-1-1/4 Hp* Compact Router (RT0701C).

-1/4" Collet (763637-1).

-Plunge Base (195563-0).

-Straight Guide (164834-6).

-Spanner Wrench (781039-9).

-Spanner Wrench (781011-1).

1 Year - 30 Day Warranty

Every Makita product is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Certain products referenced below have longer warranties. Should any trouble develop during the one-year period, return the Complete product, freight prepaid by user, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge.

These warranties do not apply to Makita Accessories or where:

Repairs have been made or attempted by others.

Repairs are required because of normal wear and tear. With regard to Pneumatic Nailers, normal wear parts include the following and are not covered under this warranty: piston/driver assemblies, piston stops, driver blades, rubber o-rings, seals, isolators, air filters, and driver belts.

The tool has been abused, misused, improperly maintained or operated. With regard to Pneumatic Nailers, improper operation includes the failure to use clean, dry regulated compressed air and/or air pressures exceeding the maximum indicated on the nailer casting. With regard to Lithium-Ion Tools, improper operation includes the use of a non-genuine or 'knock-off' battery on a Lithium-Ion Tool or Charger. With regard to Laser Instruments, abuse includes liquid damage or physical damage caused by impact.

Alterations have been made to the tool.

In no event shall makita be liable for (a) any indirect, incidental, punitive or consequential damages arising from the sale or use of the products sold under these warranties, or (b) any amount in excess of the amount actually paid to makita for the products sold hereunder. This limitation applies both during and after the terms of the warranty.

Makita disclaims liability for any implied warranties, including implied warranties of 'merchantability' and 'fitness for a specific purpose' after the expiration of any express warranty.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

Product description

At a whopping 29,000 RPM, this cordless router from Ryobi will help you with your specialty woodworking projects, either around the home or on the professional jobsite. The easy-grip rubber coating allows you to handle this in the most slippery of conditions, making precise cuts or bit changes with ease. Don’t worry about having to break out an Allen wrench or other tool to adjust your cutting depth, either. An onboard knob does that job for you, making your job that much more simple. It has ID markings, too, so you can tell the exact depth of your current project. It’s compact, too, so handling will be easy, especially on smaller projects. Plug in one of Ryobi’s 18v batteries, and you’ll be good to go on any number of jobs. With Ryobi, you can be sure that the job will be done right.

• LED LIGHTING: A set of LED lights onboard this unit allow you to see your project clearly in less than optimal lighting conditions
• GRIPZONE OVERMOLD: Maintain a firm grip with the rubber coating that allows precision handling, even in slippery conditions
• DEPTH ADJUSTMENT KNOB: Don’t worry about having to use a tool; fine tune the depth of your cuts with the onboard, easy-to-use knob
• ALUMINUM BASE: This sturdy base will keep this compact power tool stable while you perform a variety of tasks around the home or jobsite
• ONE+ COMPATIBLE: A variety of Ryobi 18V lithium ion batteries are compatible with this tool. Compatible battery models include the P100, P102, P103, P104, P105, P107, and P108

User questions & answers

Question:	Can you use a plunge base for compact router with this
Answer:	I guess so
Question:	Can you use a plunge base for compact routers
Answer:	I don’t think so, unfortunately. However dewalt just came out with a cordless compact router that can be used with the compact router plunge base. I know it’s a whole different battery but it’s the best alternative
Question:	Where is the link to purchase the battery and charger? I could not find it. I read it is a bare tool
Answer:	The one I bought was just the router also. My husband is a general contractor and had the battery and charger. I just went into Amazon and typed in Ryobi 18volt battery. Amazon has a good selection of batteries. You will need to buy the green color battery. I bought a Ryobi charger from Amazon last year, so I know they offer the charger, also. Another option is homedepot.com. Home Depot carries a large assortment of Ryobi tools and accessories . I hope this helps.
Question:	How many ah 18v battery does the ryobi one+ trim router works with? does it works with 18v 4ah battery
Answer:	Yes, one 18V battery. Works fine with 4AH. The AH rating tells you how much power it can store - that is, the higher the AH, the longer the tool will work before you need to recharge.

Product description

The Bosch GKF12V-25N 12V Max EC Brushless Palm Edge Router delivers cordless freedom and a unique offset design, making this router the choice for comfortable, compact edge routing and trimming The ergonomic GKF12V-25 palm edge router is light weight and balanced. This professional cordless router is designed specifically to make edge routing and trimming easier. It features a unique ergonomic design that has most of the tool and its gripping areas positioned over the workpiece for maximum stability when edge-forming. It weighs only 2.2 Lbs. (tool only, not including battery). The EC Brushless motor helps to provide great runtime. When rounding 0.2 In. of beech, this unit delivers 23 Ft. of routing per battery Amp hour (Ah). It has an easy-change spindle lock, fast macro depth adjustment, and easy fine depth adjustment at 0.04 In. per revolution of the dial. For user protection, it includes a drop-detection sensor that stops the motor when dropped, as well as finger barriers to help prevent contact with the bit area. This is a bare-tool kit; the battery and charger are sold separately.

• POWER: The Bosch GKF12V-25N provides ergonomic 12V Max palm edge router construction and delivers a lightweight, well-balanced design, cordless convenience, EC Brushless power and runtime for hassle-free edge routing.
• STABILITY: This cordless router allows easy handling with most of the tool and its gripping areas positioned over the workpiece for maximum stability when edge-forming and trimming.
• EFFICIENT: With an EC Brushless motor, the GKF12V-25N cordless router provides efficient power, with a maximum 13,000 rpm and up to 23 Ft. of round-over capacity per battery Amp hour.
• VERSATILE: Featuring a versatile depth-adjustment system, the GKF12V-25N ensures precise fine depth adjustment (0.04 In. per dial revolution) and easy macro depth adjustment.
• CONVENIENT: The router’s depth adjustment lock helps prevent tampering with depth setting while the easy-change spindle lock provides easy one-wrench bit changes for maximum convenience.

User questions & answers

Question:	Is it possible to use this router with a template guide or an inlay kit
Answer:	any router can be used with a template kit... if your cuts are not deep or wide, this would be ideal... other than the dust mess remember, though, it does not plunge, so u will have to push it down for the initial start in some areas so u need an appropriate plunge bit.
Question:	Can a keyhole bit be used
Answer:	As long as it’s 1/4” shank
Question:	Will it work with 10.5 V Bosch battery
Answer:	Yes, the GKF12V-25N Palm Edge Router will also work with a 10.5V Bosch Lithium-ion Battery. Please be reminded that it might result in a shorter runtime of the tool. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	will all 12v bosch batteries fit this router
Answer:	Thank you for your question. Yes, any Bosch 12V Lithium Ion battery will work with GKF12V-25N Router. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product features

Bosch 12V Max EC Brushless Palm Edge Router (GKF12V-25N)

The Bosch GKF12V-25N 12V Max EC Brushless Palm Edge Router delivers cordless freedom and a unique offset design, making this router the choice for comfortable, compact edge routing and trimming. The ergonomic GKF12V-25N palm edge router is light weight and balanced. This professional cordless router is designed specifically to make edge routing and trimming easier. It features a unique ergonomic design that has most of the tool and its gripping areas positioned over the workpiece for maximum stability when edge-forming. It weighs only 2.2 Lbs.

Includes: GKF12V-25N EC Brushless Palm Edge Router (Bare Tool), 1/4 in. Self-Releasing Collet Chuck (PR114), Forged Collet Chuck Wrench

Lasting power

The EC Brushless motor helps to provide great runtime. When rounding 0.2 In. of beech, this unit delivers 23 Ft. of routing per battery Amp hour (Ah).

Designed comfort

This cordless router allows easy handling because most of the tool and its gripping areas are positioned over the workpiece for maximum stability when edge-forming and trimming.

Speed and power

EC Brushless motor – provides efficient power, with a maximum 13,000 rpm and up to 23 Ft. of round-over capacity per battery Amp hour.

Versatile

Versatile depth-adjustment system – ensures precise fine depth adjustment (0.04 In. per dial revolution) and easy macro depth adjustment. The depth adjustment lock helps prevent tampering with the depth setting.

Product description

Battery and Charger SOLD SEPARATELY. This item is Factory Reconditioned, some show more wear than others

• Battery and Charger SOLD SEPARATELY
• Quick Release Lever and Micro-Adjust Dial: 2-ways for easy depth adjustments
• Vacuum Dust Chute: Eliminates sawdust on work piece when properly attached to 1-1/4 in. or 1-7/8 in. sizes
• SOFTStart Technology helps prevent gouges on work surface and extends motor life
• This item is Factory Reconditioned, some show more wear than others

Product description

This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box or bag. RYOBI introduces the 18-Volt Cordless Fixed Base Trim Router Kit with Tool Free Depth Adjustment. This Trim Router allows the user to create the perfect edge with the correct router bit and optional woodworking base. With 29,000 RPM, you can trim quickly and efficiently. The router features a compact design for fine routing. 18 Volt Battery and Charger Included. This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box or bag

• This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box or bag
• Adjustable cut depth to match your desired application
• Aluminum base offers stability and accuracy
• Features micro-adjusting to dial into specific settings
• 29,000 RPM
• 18 Volt Battery and Charger Included

Product description

NETGEAR AC750 WiFi Range Extender (EX3700-100NAS). System Requirements:2.4 and/or 5GHz, 802.11 a/b/g/n/ac wireless router or gateway, Microsoft. Internet Explorer. 8.0, Firefox. 20, Safari. 5.1, Google Chrome 25.0 browsers or higher. Troubleshooting tip- If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Data throughput, signal range, and wireless coverage per sq. ft. may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Operating temperature: 32°to 104°F.

• Extended wireless coverage: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more
• AC750 WIFI speed: Provides up to 750Mbps performance using dual band and patented FastLane technology
• Universal compatibility: works with any wireless router, gateway, or cable modem with wifi. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non standard or outdated
• Wired Ethernet port: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed
• Safe & secure: Supports WEP and WPA/WPA2 wireless security protocols
• Simple to setup: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location

User questions & answers

Question:	My family has two appartments next to each other, both separate electrical installations. Would this work if we wanted to split the internet bill
Answer:	Yes the EX8000 used as a wifi extender you have the option of having a guest network. You can use same SSID name as your main router or use a different SSID altogether. I did have issues with more than one extender on the same network using same SSID name as main router so I had to change one of the extenders to a different SSID.
Question:	Has anyone connected a ps4 of xbox one to the wifi from the range extender? if so, signal and game play any good
Answer:	If you mean an AT&T router signal, yes. If you mean cell tower signal, then no.
Question:	Does it create a new sid or does it exteneded your current sid, so one does not have to switch to differing networks when in range
Answer:	the input voltage is from 100 to 240 volts
Question:	I don't understand how some people give this 4-5 stars and others can't get it to work and give it 1 star
Answer:	there are 4 ports. I use multiple ones as this is the only system I can find that does not change the network name but once a year I also have one break and have to replace it or hard reset it myself.

Product features

Discrete Wall Plug Design

Plug into a wall outlet for a sleek solution that extends your router's range and stays out of sight.

Smart Connect up to 15 Devices

Intelligently selects between dual bands to minimize interference and maximize speed for your smart wireless devices.

5-Minute Setup

Connect to your existing router with one button press, connect devices to your network, and you’re done.

Connect a Wired Device, Too

One 10/100M Ethernet port lets you easily connect a nearby wired device for faster transfer and uninterrupted connection.

Universally Compatible

Works with any WiFi router for hassle-free reliability.