11 best ethernet port

Product description

TP-LINK 5 port Gigabit Ethernet network switch | Ethernet Splitter | sturdy metal w/ Shielded ports | life time | plug-and-play | traffic Optimization | unmanaged (TL-SG105).

• One Switch Made to Expand Network 5× 10/100/1000Mbps RJ45 Ports supporting Auto Negotiation and Auto MDI/MDIX
• Gigabit that Saves Energy Latest innovative energy-efficient technology greatly expands your network capacity with much less power consumption and helps save money
• Reliable and Quiet IEEE 802.3X flow control provides reliable data transfer and Fanless design ensures quiet operation
• Plug and Play Easy setup with no software installation or configuration needed
• Advanced Software Features Prioritize your traffic and guarantee high quality of video or voice data transmission with Port-based 802.1p/DSCP QoS and IGMP Snooping
• Study Metal Case Fanless Quiet Design, Desktop or Wall-mounting Design. Operating Temperature: 0 degree Celsius 40 degree Celsius (32 degree Fahrenheit 104 degree Fahrenheit)
• Limited Lifetime Warranty Industry leading limited lifetime warranty and free 24/7 technical support

User questions & answers

Question:	What port would you plug the lan cable coming from the router into on the 24 port gigaswitch
Answer:	It should work fine. Keep in mind this is a gigabit switch and cat8 would more typically be used for 10gb networking but its all compatible.
Question:	Is this model wall-mountable? Does it have the little "screw-guides" to hang it on the wall
Answer:	Your configuration should look like this: (Internet) Cable -> ARRIS TG1672G -> Port 1, 2, 3, or 4 -> Netgear 8-Port Switch Your Cable Modem provides 4 Gigabit Ethernet Ports and when you connect the Netgear 8-Port switch you lose 2 ports (one on the cable modem & one on the Netgear and end up with 10 Gigabit Ethernet Ports instead of 4. No configuration is needed. If one of the devices you're adding is a Wi-Fi router, then your configuration will look like this: (Internet) Cable -> ARRIS TG1672G -> Port 1 -> Wi-Fi Router -> Netgear 8-Port Switch. If you want all devices to be able to see each other, then you can have up to 7 of them plugged into the Netgear Router.
Question:	what is the difference between the smart switch and the unmanaged switch
Answer:	No. It's top speed is Gigabit (1000 Mbps), but it will work with 10/100 Mbps devices well. It's not just limited to Internet but any devices that wish to communicate with each other i.e. computer to Network Attached Storage (NAS) device, etc ... and usually those devices have gigabit Ethernet ports so they can communicate with each other at the gigabit speeds.
Question:	Does this have a web GUI or do I have to use the TP-Link software for configuration
Answer:	Make your flow as follows: Modem -> Wi-Fi Router -> Netgear 16-Port Gigabit Ethernet Switch. All your devices (up to 15 of them) will get their IP address from the Wi-Fi Router. You may also want to consider labeling your cables. I have two 16-port switches, one Unmanaged (for Internet) and one Managed (for private network), and all the cables are both color-coded and labeled.

Product features

Gigabit Ports for More Reliable Speeds

Increase the reliability of your connected devices with the TL-SG105 5-port Gigabit desktop switch. 5x non-blocking gigabit ports enable instant transferring of large, bandwidth-intensive files without interference.

Multiple User Scenarios

The TL-SG105 Desktop Switch provides an easy way to increase the reliability of your network server connections. Whether needed for your home or office network, TL-SG105 helps you get business done easily.

A Switch Made to Connect

TL-SG105 can easily expand your network in a number of ways. Simply connect it to a WiFi device, such as a router or range extender, and transmit reliable internet to up to four connected devices to experience better performance.

Premium Quality. Longer Life.

TL-SG105 features a durable and sleek high-quality casing, innovative green technology to save energy, and shielded ports to prevent static interference when transferring files.

Plug and Play

The plug and play design makes set up easier than ever before, no IT professional required. Each port features the auto-negotiation feature to sense the link speed of a network device and intelligently adjust to ensure compatibility and the best performance.

Product description

The NETGEAR 5 Port Gigabit unmanaged Switch provides an easy, reliable, and affordable way to expand your network connections in homes and small offices. It is plug and play and features a rugged metal case. Features also include Auto MDI/MDI, LED indicator on Each port, energy effi¬cient technology, fan less design, auto negotiation and non blocking switching architecture.

• Plug and play: Simple setup with no software to install or configuration needed
• Versatile mounting options: Supports desktop or wall mount placement
• Silent operation: The Fanless design means zero added noise wherever its located, making it ideal for noise sensitive environments
• Peace of mind warranty – Covered by an industry leading 3 year limited hardware warranty
• Energy efficient: Designed to optimize power usage, lowering its cost to operate; Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode
• Built to last: Every Netgear Network switch is rigorously tested for reliability, quality, and performance

User questions & answers

Question:	I am using cat 8 cables. Will this product work? If not what other switch do i need
Answer:	It should work fine. Keep in mind this is a gigabit switch and cat8 would more typically be used for 10gb networking but its all compatible.
Question:	Should this connect to arris tg1672g without any configuration on either side? the arris combines "..a 4-port gigabit router.." not working for me
Answer:	Your configuration should look like this: (Internet) Cable -> ARRIS TG1672G -> Port 1, 2, 3, or 4 -> Netgear 8-Port Switch Your Cable Modem provides 4 Gigabit Ethernet Ports and when you connect the Netgear 8-Port switch you lose 2 ports (one on the cable modem & one on the Netgear and end up with 10 Gigabit Ethernet Ports instead of 4. No configuration is needed. If one of the devices you're adding is a Wi-Fi router, then your configuration will look like this: (Internet) Cable -> ARRIS TG1672G -> Port 1 -> Wi-Fi Router -> Netgear 8-Port Switch. If you want all devices to be able to see each other, then you can have up to 7 of them plugged into the Netgear Router.
Question:	Do i have to have 1gig internet speed to have this or no
Answer:	No. It's top speed is Gigabit (1000 Mbps), but it will work with 10/100 Mbps devices well. It's not just limited to Internet but any devices that wish to communicate with each other i.e. computer to Network Attached Storage (NAS) device, etc ... and usually those devices have gigabit Ethernet ports so they can communicate with each other at the gigabit speeds.
Question:	how to get plug and play to work? 14 ports not putting out IP, have modem and wifi router connected, but cant get other ports to work
Answer:	Make your flow as follows: Modem -> Wi-Fi Router -> Netgear 16-Port Gigabit Ethernet Switch. All your devices (up to 15 of them) will get their IP address from the Wi-Fi Router. You may also want to consider labeling your cables. I have two 16-port switches, one Unmanaged (for Internet) and one Managed (for private network), and all the cables are both color-coded and labeled.

Product features

Easy, Plug-and-Play Setup

Simply plug in your devices. No configuration or software required.

Energy Efficient Design

Energy efficient technology provides power savings for your home.

Backed by 3 Year Limited Product Assurance

Plus 90 day technical support 24 hrs/day, 7 days a week.

Trust the Networking leader

NETGEAR is the brand of choice when it comes to home networking solutions.

Product description

TP-Link 8 Port Gigabit Ethernet Network Switch.

• 【One Switch Made to Expand Network】8× 10/100/1000Mbps RJ45 Ports supporting Auto Negotiation and Auto MDI/MDIX
• 【Gigabit that Saves Energy】Latest innovative energy-efficient technology greatly expands your network capacity with much less power consumption and helps save money
• 【Reliable and Quiet】IEEE 802.3X flow control provides reliable data transfer and Fanless design ensures quiet operation
• 【Plug and Play】Easy setup with no software installation or configuration needed
• 【Advanced Software Features】Prioritize your traffic and guarantee high quality of video or voice data transmission with Port-based 802.1p/DSCP QoS and IGMP Snooping
• 【Study Metal Case】Fanless Quiet Design, Desktop or Wall-mounting Design. Operating Temperature: 0 degree Celsius ~40 degree Celsius (32 degree Fahrenheit ~104 degree Fahrenheit)
• 【Limited Lifetime Warranty】Industry leading limited lifetime warranty and free 24/7 technical support

Product features

Gigabit Ports for More Reliable Speeds

Increase the reliability of your connected devices with the TL-SG108 8-port Gigabit desktop switch. 8x non-blocking gigabit ports enable instant transferring of large, bandwidth-intensive files without interference.

Multiple User Scenarios

The TL-SG108 Desktop Switch provides an easy way to increase the reliability of your network server connections. Whether needed for your home or office network, TL-SG108 helps you get business done easily.

A Switch Made to Connect

TL-SG108 can easily expand your network in a number of ways. Simply connect it to a WiFi device, such as a router or range extender, and transmit reliable internet to up to seven connected devices to experience better performance.

Premium Quality. Longer Life.

TL-SG108 features a durable and sleek high-quality casing, innovative green technology to save energy, and shielded ports to prevent static interference when transferring files.

Plug and Play

The plug and play design makes set up easier than ever before, no IT professional required. Each port features the auto-negotiation feature to sense the link speed of a network device and intelligently adjust to ensure compatibility and the best performance.

Product description

TP-Link TL-SF1005D 5-Port Unmanaged 10/100M Desktop SwitchSupports IEEE 802.3x flow control for Full Duplex mode and backpressure for half-duplex mode Supports MAC address auto-learning and auto-aging Standards and Protocols: IEEE802.3, 802.3u, 802.3x, CSMA/CD, TCP/IP Ports: 5x 10/100Mbps Auto-Negotiation RJ45 ports (Auto MDI/MDIX) Basic Function: Wire-speed Performance MAC Address Auto-Learningand Auto-aging IEEE802.3x flow control for Full-Duplex Mode and backpressure for Half-Duplex Mode Backbound Bandwidth: 1Gbps MAC Address Table: 1kForwarding Rate: 10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port 100Base-Tx: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100?? STP (maximum 100m) LED Indicator: Power, Link/Act (1, 2, 3, 4, 5) Safety & Emission: FCC, CE Power: External Power Adapter Transmission Method: Store-and-Forward Network Media: 10Base-T: UTP category3, 4, 5 cable (maximum 100m) EIA/TIA-568 100? STP(maximum 100m) Interface : 5 × 10/100Mbps RJ45 Ports , AUTO Negotiation/AUTO MDI/MDIX; Protocols Supported: IEEE 802.3i/802.3u/ 802.3ab/802.3x. External Power Supply: External Power Adapter (Output: 9.0VDC / 0.6A), Max Power Consumption: 1.9W, Max Heat Dissipation: 6.4 BTU/h.

• PLUG-AND-PLAY - Easy setup with no configuration or no software needed
• ETHERNET SPLITTER Connectivity to your router or modem router for additional wired connections (laptop, gaming console, printer, etc.)
• 5 Port FAST ETHERNET - 5 10/100 Mbps Gigabit auto-negotiation RJ45 ports greatly expand network capacity
• COST EFFECTIVE - Fanless Quiet Design, Desktop design
• RELIABLE - IEEE 802.3x flow control provides reliable data transfer
• UP to 68% Power Saving - Automatically adjusts power consumption according to the link status and cable length
• AUTO-NEGOTIATION - Supports Auto-MDI/MDIX, eliminating the need for crossover cables
• Unlimited 24/7 technical support for FREE

Product features

Plug and Play

The auto features of this Fast Ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network

Go Green with Your Ethernet

Have the choice to go green when expanding your wired network. The TL-SF1005D switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power.

High Performance and Reliability

The non-blocking switching architecture adopted in the 5-Port Fast Ethernet Switch improves network response times and significantly speeds up the traffic between subnets by forwarding and filtering packets at full wire speed for maximum throughput.

Product description

The USB 3. 0 To Gigabit Ethernet adapter UE300 adds Gigabit Ethernet network connectivity to your Ultrabook, MacBook Air or desktop through a USB 3. 0 port. Backward compatible with USB 2. 0/1. 1 standards, transferring files at ultrafast speed over an Ethernet port.

• 【More stable connections】 the TP Link UE300 is a Gigabit Ethernet Adapter that enables you to turn your laptop's USB port into an RJ45 Ethernet port. Switch from an unstable wireless connection to a stable high speed Ethernet connection
• 【Gigabit speeds】 take your speed to the next level with the UE300 Ethernet adapter. Experience full 10/100/1000Mbps Gigabit Ethernet performance over your laptop's USB 3. 0 port and elevate your browsing experience to transfer files, play games, video chat, and stream HD videos seamlessly
• 【Compatible with most devices】 does not support Nintendo Switch, Wii U, Wii. Compatible with IEEE 802. 3, IEEE 802. 3U and IEEE 802. 3ab. Supports IEEE 802. 3az (Energy Efficient Ethernet). backwards compatible with USB 2.0 and USB 1.1 standard
• 【Plug & play】 utilizing Realtek RTL8153 Chipset, driver free installation for Windows XP and later version, macOS 10.9 and later version, Chrome OS and Linux OS. (Note: for Mac OS 10.6 10.8, a driver is required and needs to be downloaded from TP Link website)
• Ultra compact & foldable design, the UE300 conveniently folds down and is extremely portable, enabling you to take it with you wherever you go
• 【Worry free customer support】 industry leading 24 month warranty and free lifetime 7/24 technical support

User questions & answers

Question:	can you add it to pc that already has lan port, to have 2 ethernet ports
Answer:	Hi, Yes, you can simply download the drivers for your respective computer, and start using the UE300 along side of your current LAN port. Best Regards, TP-Link Support
Question:	Does this adapter work for MacOS
Answer:	yes
Question:	It works for OS
Answer:	Hi, We can confirm that the UE300 will work with OS 10.13 from our testing. Best Regards, TP-Link Support
Question:	is it compatible with nintendo switch
Answer:	So we have an update to this. Our older version the UE300 is not compatible with the Nintendo Switch. The New version the UE305 is compatible with the The Nintendo Switch though. We did merge the SKUs so it might be hard to tell which is which so the simplest way to do this is by the color of the chassis the UE300 is white and the UE305 is black. If you are looking for Switch compatibility look for the adapter that is black.

Product description

The Powerline 2000 + extra outlet extends your Internet access to any room over existing electrical wiring. It’s perfect for connecting Smart TVs, streaming players & game consoles and ideal for 4K HD video streaming & lag-free gaming. It sets up in minutes with the push of a button.

• Use your existing electrical wiring to extend your Internet access to any room in your house.
• Homeplug AV2 technology supports Gigabit speeds through your electrical outlets for improved coverage
• Extremely fast Powerline adapter for Gigabit speeds, perfect for connecting smart TVs, streaming players & game consoles with 4K HD streaming and lag-free gaming
• Extra plug with our noise filtered power outlet built into the adapter to ensure the performance
• Multiple data streams (MIMO) with Beamforming technology to offer improved coverage by directing the signal where you need it
• Connect multiple adapters to expand your network coverage. System requirements: Ethernet: RJ-45 Ethernet ports,
• Plug and Play - Set up in minutes, no need to configure or install software
• Input power: 100V - 240V, 50/60 Hz. Extremely fast speed up to 2000Mbps

User questions & answers

Question:	If I buy two of these kits will I have 1 sender and three receivers or 2 pairs
Answer:	Keep in mind, the video on a product page misleads customers! You can't buy WiFi PL extender PLW1010 as they say in Video. If you buy two kits, you'll have - one powerline LAN distributor (non-wifi) - two WiFi extenders (each: PL receiver + Wifi broadcasting + 1 Ethernet Port) - one powerline receiver (non-wifi) you can plug to the power outlet and use as single Ethernet port
Question:	Can someone tell me what this does
Answer:	Depends on which version you refer to. The PLW1010 has WiFi capability, the PL1010 does not. They both have an ethernet port. The base unit is located near your router - use ethernet to connect the base unit to your router to get the best throughput from your router and into the house wiring. Plug it into an Electrical outlet and it sends your LAN signal through your house wiring to be picked up by the remote unit(s) plugged into wiring elsewhere in the house. The remote unit has an Ethernet port, so you can attach a Smart TV, BluRay, Game Console, whatever, to the ethernet and get pretty good network response (probably not gigabit, but pretty good anyway). With the Wifi Version (the PLW1010) the remote unit ALSO transmits WiFi signal. I have not purchased this WiFi product yet, I have a ethernet only version right now and looking at this to expand my iPhone/tablet Wifi signal in remote parts of the house). As such, I have an older house and the electrical wiring is sketchy and is rather noisy and fluctuates, but this technology seems to work nonetheless even on the other side of the house, I even have had the base unit plugged into an extension cord and it still works. So bottom line, this will extend your LAN signal to another room of the house via ethernet, and the WiFi version also creates a WiFi Access Point in that remote room. From what others say here, that Wifi is an extension of your router WiFi in SSID/pw. I hope this answers your question.
Question:	Does this come with 2 units
Answer:	Comes with 2 units. I was able to get a POE switch to work as well (get an unmanaged one for less complicated setup), and I added in multiple POE Cameras to it. Works great!
Question:	Do you end up with a new network name or does it mirror your existing wi fi network (so you don't have to have devices switch networks
Answer:	Most of the answers here are giving you bits and pieces. Here's the scoop from a long time network engineer and administrator. (BTW, I'm here because I'm buying another one for another client.) 1. The wired devices in this listing act as if you had a long Ethernet cable. It's transparent. Its a work of art. Much better than any mesh system 2. As far as the wireless, there are two options - The thing to remember is most devices (computers phones, tablets are fairly single minded when it comes to finding a better signal so if they can see the current access point at all they will hang on for dear life. You can turn off the wifi on the device and turn it back on and that will help it to reanalyze the situation. Business systems which have many of these monitor where devices are and will automatically kick a device off of one, forcing it to reanalyze the situation. a. Use the default setup - some people like this because then they can tell which antenna (access point) their device is connected. b. Duplicate the existing wifi network - This can be done using the WPS setup or manually. I like doing it manually so I can configure the whole setup (channel, channel width, security level, etc.) For the most part the handoff should work seamlessly however there may be times where certain devices (usually older ones) will refuse to change or take a while to make the switch. For most of my clients when I have to setup one of these, I duplicate the existing network to make it easier on them. I have yet to hear of any complaints. Two more details. For best performance of any of these devices 1. It MUST be plugged into the wall outlet, no power taps or surge protectors. They have filters which choke the communication 2. These normally wont work across a meter - in other words, you probably cant use it to share internet with your next door neighbor. There are a few instances where it works but they are few.

Product features

Next Generation Powerline

Extremely fast speed - up to 2000Mbps.

Reliable Network

Connect multiple adapters to expand your wired network reliably.

Latest Technology

Multiple data streams (MIMO) offer improved coverage and speed.

Plug-and-play

Set up in minutes, no need to configure or install software.

Noise-filtered Power Outlet

Provides an extra outlet and improves the overall Powerline network performance.

Push-and-Secure

Encrypts Powerline network connections with the touch of a button.

Product description

The TP-LINK 16-port 10/100/1000Mbps desktop switch provides you an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Plug and play Design, with no configuration required, makes the product easy to use.  Moreover, TL-SG116 adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG116 can save power consumption, making it an solution for your home or office network. Windows; Mac; Linux; etc.

• 【One Switch Made to Expand Network】16× 10/100/1000Mbps RJ45 Ports supporting Auto Negotiation and Auto MDI/MDIX
• 【Gigabit that Saves Energy】Latest innovative energy-efficient technology greatly expands your network capacity with much less power consumption and helps save money
• 【Reliable and Quiet】IEEE 802.3X flow control provides reliable data transfer and Fanless design ensures quiet operation
• 【Plug and Play】Easy setup with no software installation or configuration needed
• 【Advanced Software Features】Prioritize your traffic and guarantee high quality of video or voice data transmission with Port-based 802.1p/DSCP QoS and IGMP Snooping

Product features

Gigabit Ports for More Reliable Speeds

Increase the reliability of your connected devices with the TL-SG116 16-port Gigabit desktop switch. 16x non-blocking gigabit ports enable instant transferring of large, bandwidth-intensive files without interference.

Multiple User Scenarios

The TL-SG116 Desktop Switch provides an easy way to increase the reliability of your network server connections. Whether needed for your home or office network, TL-SG116 helps you get business done easily.

A Switch Made to Connect

TL-SG116 can easily expand your network in a number of ways. Simply connect it to a WiFi device, such as a router or range extender, and transmit reliable internet to up to seven connected devices to experience better performance.

Premium Quality. Longer Life.

TL-SG116 features a durable and sleek high-quality casing, innovative green technology to save energy, and shielded ports to prevent static interference when transferring files.

Plug and Play

The plug and play design makes set up easier than ever before, no IT professional required. Each port features the auto-negotiation feature to sense the link speed of a network device and intelligently adjust to ensure compatibility and the best performance.

• 【USB 3.0 Ethernet Adapter 】:Expand a single USB 3.0 port to connect more, Ablewe 4 in 1 USB 3.0 to Ethernet adapter features a 1000Mbps RJ45 gigabit port, 3 USB 3.0 ports. And all hub ports can work simultaneously.
• 【5Gbps Data Transfer】: This USB network hub offers extra 3 USB 3.0 ports for connecting multiple USB peripheral devices such as flash drive, hard drive, keyboard, mouse, printer and more, keep you away from the trouble of plugging & unplugging your devices repeatedly. You can also transfer an HD movie in seconds.
• 【Plug and Play】:No need to install any drivers, provides access to superfast network speeds 10/100/1000Mbps,just plug and play, and makes it possible for computers without an Ethernet port to connect to an wired Ethernet connection.
• 【Wide Compatibility】:Perfect for laptops with USB 3.0 port, such as MacBooks/ChromeBooks/Surface laptops and more other devices etc, compatible with Windows 10/8.1/8/7/Vista/XP, Mac OSX 10.6/10.7/10.8/10.9/10.10, 10.13, Linux kernel 3.x/2.6, and Chrome OS.
• 【Compact Design】:ABLEWE Ethernet adapter is compact and lightweight, easy to carry. Premium aluminum case design make this hub durable to use. Ablewe offer worry-free 24-month warranty and professional customer service.

User questions & answers

Question:	does this work with the fire tv (cube
Answer:	Definitely, UtechSmart usb c hub come with a warranty of 12 months. And you can get extra 5 months warranty if you sign on our website (you could get the website address on user manual of the usb c hub). The usb c hub to HDMI use the same heat dissipation technology as MacBook Pro to extend the working life and provide a excellent performance. It will maintain the temperature under 48.5℃. Any questions, feel free to contact us via [email protected]. We are here to serve you. UtechSmart Support Team
Question:	I bought the adapter, and it gets very hot, is this normal or it's defective
Answer:	I got this the other day and I plugged in my second monitor into the USB-C and it does not work! I assume the USB-c on this unit does not transmit video!
Question:	Where can i find drivers for this device if none were found when initially plugged into a usb port
Answer:	The wire length is 6.2 inches. UtechSmart usb c hub comes with 3 standard USB 3.0 ports, 1 HDMI multimedia port, 1 PD 3.0 USB C charging port and 1 Ethernet port for Internet connectivity. An ideal USB-C expansion hub for Apple MacBook, Apple MacBook Pro 2016/2017/2018, Apple iMac/ iMac Pro (21.5 inch, 27 inch), Google ChromeBook Pixel, Samsung, Dell, Asus, HP, Lenovo, XPS and many other Type C laptops. Any questions, feel free to contact us. We are here to serve you. UtechSmart Support Team
Question:	My laptop doesn’t have an ethernet port, will this adapter function as an external ethernet port
Answer:	UtechSmart 6 In 1 USB C Hub to HDMI couldn't work with Nintendo Switch. Our usb c to ethernet hub is built in advanced dual-core VL817 chip with lower power consumption, quicker heat dissipation and higher data transfer efficiency. Any questions, feel free to contact us via [email protected]. We are here to serve you.

• Ethernet to USB adapter connects a computer or Raspberry Pi 3 to a router, modem, or network switch for a Fast Ethernet (100 Mbps) network connection; Connect the USB Ethernet adapter to your laptop without an Ethernet port
• Cost-effective USB network adapter for many computer applications that only require a 100 Mbps Ethernet connection; Use this convenient USB Lan adapter to replace a failed USB NIC or Ethernet port on an older computer
• Portable Ethernet USB adapter weighs less than 1 ounce with a 6-inch cable tail to connect to your computer; Wired USB LAN adapter is more secure than most Wi-Fi connections
• Feature-filled USB to Ethernet network adapter supports Wake-on-Lan (WoL), Full-Duplex (FDX) and Half-Duplex (HDX) Ethernet, Crossover Detection, Backpressure Routing, Auto-Correction (Auto MDIX); Supports IPv4/IPv6 protocols in 10BASE-T and 100BASE-TX networks
• Driver-free Simple installation USB to RJ45 adapter for most computers; Diagnostic LEDs on this Ethernet USB adapter verify the power, connection and data transfer status; OS compatible Windows 10/8.1/8/7/Vista/XP, MacOS 10.6 and up, Chrome OS and Linux for kernels up to 4.15; USB to RJ45 adapter is NOT compatible with Windows RT, or Android

User questions & answers

Question:	Can two of these be used to create a long distance usb data run? If not can anyone give suggestions on a good wall kit do to a 25-35 foot in wall run
Answer:	After installation of new driver and restart, the USB3.0 to gigabit connector works great on Mavericks as of 2014-06-05. Have 1Gb/s connectivity and up to 60MB/s throughput for file transfers on our lan.
Question:	Is this PXE boot compatible (network boot) (XPS
Answer:	I am using it with Kubuntu Linux 18.04 LTS. It works fine. I have two ETHERNET connections and change the name of each to wired-pub (Internet) and wired-pvt (private). I set the speed for 1000 Mbps and Full Duplex. Then I use the nmcli command i.e. nmcli connection modify wired-pub ipv4 dot route-metric 150, and the wired-pvt metric to 250 (this device is access to my private network) and that ensures that no matter which connection is set up first I always get the internet on the correct subnet. I use virtualbox software to create virtual machines. Have also tried this on Windows 7 & Windows 8.1 machines and am able to set the metric for the interface to get each to work as they should. No complaints so far
Question:	Work for Mac
Answer:	Works fine with Big Sur. Plug n use.
Question:	I purchsed this adapter and it did not include a driver disk. Does anyone know where i can find a driver for this product at
Answer:	It should work without any problem, I have a MacBook Pro early 2015 and I don't have any issue with this adapter.

Product features

Connect More with Cable Matters Networking Products

The Cable Matters USB to Fast Ethernet Adapter brings Fast Ethernet connectivity to your Ultrabook, notebook, or tablet with a network connection up to 100 Mbps. This compact and lightweight USB to network adapter is a perfect accessory for file transferring with Fast Ethernet, which is more reliable than a wireless network.

OS Compatibility

Compatible with Windows, macOS, Linux, Chrome OS, and Android

Important Note

Not compatible with Windows RT or Switch game console

Wired security for peace of mind

• Transfer data more securely with a wired connection.
• Stable network link for video streaming and gaming.
• Prevent unauthorized wireless access.
• Supports IPv4 and IPv6 protocols.
• Compatible with IEEE 802.3 and IEEE 802.3u (10BASE-T and 100BASE-TX networks).
• Supports MAC address pass-through (MAC clone) with the EZ-Dock utility software (Windows). Download the software from the Cable Matters website

Plug & Play

• Simply plug the adapter into the USB port of your computer without downloading any external software drivers.
• Universal compatibility with Chrome OS, Linux, Mac OS X, and Windows operating systems.

Diagnostic LED Indicators

• Diagnostic LED indicators on the USB 2.0 to Ethernet adapter verify the network connection and data transfer status.
• Supports performance features including WoL, FDX, HDX, crossover detection, backpressure routing, and auto-correction.

Compact Connectivity Companion

• Weighs less than 1 ounce
• Flexible USB cable tail
• Travels easily in a laptop sleeve

Product description

The NETGEAR GS105NA Unmanaged Desktop Switch features 5 Port Gigabit Ethernet, ProSAFE Lifetime Protection and more.

• ETHERNET PORT CONFIGURATION: 5 Gigabit ports
• PLUG AND PLAY: Simple set up with no software to install or configuration needed
• VERSATILE MOUNTING OPTIONS: Supports desktop or wall mount placement
• SILENT OPERATION: The fanless design means zero added noise wherever its located, making it ideal for noise sensitive environments
• PROSAFE LIFETIME PROTECTION: Covered by an industry best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert
• ENERGY EFFICIENT: Designed to optimize power usage lowering its cost to operate; Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode
• BUILT TO LAST: Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance

Product features

Home & Small Business

Unmanaged: Plug and play solution to connect all your network devices without the complications of configuration or management software -- yet achieve a reliable and secure network.

Smart Managed Plus: Empowers growing small businesses with basic capabilities to configure, secure, and monitor their network beyond simple connectivity at an affordable cost - an ideal upgrade from unmanaged switches.

Small & Medium Business

Smart Managed Pro: For larger organizations requiring advanced configuration and refined control for secure setup, access, and management of complex business networks. Supports the needs of edge networking and automated management of prioritized voice, video, and data traffic.

Smart Cloud: Provides fully integrated management, visibility, and control from any device, anywhere. Advanced configuration and remote access using the NETGEAR Insight app and cloud portal for unparalleled flexibility.

Enterprise

Fully Managed: An affordable, powerful, and future-proof networking infrastructure designed for enterprise and campus networks, with core and edge networking, and AV-over-IP solutions. Includes integrated security, high availability, delivery optimization, and enhanced manageability.

Product description

TP-Link UE330 is a 3-port USB 3.0 hub with 1 extra Gigabit Ethernet port , no power adapter needed. Plug & Play for MacBook, Mac Pro/Mini, iMac, XPS, Surface Pro, Notebooks, Desktop PCs, USB Flash Drives, Mobile HDD, and More

With TP-Link UE330, you can now transfer data at up to 10 times the speeds of the older USB 2.0 standards. Speeds of 5Gbps are a vast improvement over USB 2.0’s 480Mbps top speed. It is also backwards compatible, allowing you the capability of using USB 2.0/1.1 products if need be.

Please Note:

2.4Ghz wireless devices, such as wireless keyboard and mouse adapters, may not work in close proximity to USB 3.0 devices or hubs. Connecting to a USB 2.0 port is recommended. The USB ports are intended for data transfer. They only provide a minimal 0.5A charging output.

Interface Available: 3 USB-A 3.0 Ports, 1 Gigabit Ethernet Port, 1 USB-A 3.0 Connector

• Usb 3.0 to Gigabit Ethernet Adapter enables you to turn your laptop? S USB port into a RJ45 Ethernet port to enjoy stable network connection.
• Instantly add 3 USB 3.0 Ports to any compatible devices. And support 10 times faster data transfer rate than USB 2.0. Backward compatible with USB 2.0/1.1 devices.
• Plug & play, Works perfectly with devices running with Windows XP/Vista/7/8/8.1/10, Mac OS, Linux OS and chrome OS, also compatible with Xbox, PS3/4, Raspberry Pi and more.
• Compact and light design makes UE330 an ideal gadget on the go with your trip.
• Industry leading free Lifetime 24/7 technical support and a 2 year warranty.
• From reliable Brand: TP Link has been Ranked as the world? S no. 1 provider of WLAN products for the past consecutive 7 years by IDC. In 2017.

User questions & answers

Question:	Can I connect my wired keyboard and mouse on the usb hub
Answer:	It can fit four wine bottles .
Question:	Does it require a driver for Mac OS
Answer:	they are 3 models the one I chose is neither of those. I chose one that is more of a very pale white/gold/beige colour with gold trim I perfectly matches a 100 year old coffee table I have frankly, they are cheap in make (plastic) but mine looks good. I don't use it as functional - just for looks
Question:	Is this fully compatible (plug & play) with a 2012 macbook air (13inch) and lenovo yoga 720? OR -- will i need to install drivers
Answer:	17
Question:	I have a work phone that uses internet to receive incoming phone calls, etc.using an Ethernet cable. Would this work to connect my business phone to
Answer:	I’m pretty certain it did not.