12 best kit standard for arduino unos

Product description

Brand : ElectroCookie

PCB type: Double-sided

Surface finish: Gold plated to prevent oxidation

Color: Black

Dimensions: 3.27"x2.09" (83mm x 53mm)

Mounting hole: M3 (Ø3.2mm)

Trace width: 0.04" (1mm)

• Useful in creating your own DIY electronic projects
• 2 hole strips with power bus lines for quick and easy prototyping
• 20% larger than other protoshields for extra components
• High-quality and Gold-plated finish to prevent oxidation, and all holes are through-plated for mounting strength
• Lead free and RoHS compliant, Environment-friendly

User questions & answers

Question:	Does this board have a standard Icsp breakout and pins
Answer:	Length is 3 1/4", width is 1 3/8" and height from bottom to the top of the connectors is about 5/16" ,

• Latest CNC Shield Version 3.0 board.
• MCU: ATmega328, USB interface: ATmega16U2.
• PWM Spindle and direction pins. 4-Axis support. Runs on 12-36V DC.
• 2 x End stops for each axis (6 in total).
• 4Pcs A4988 Stepper Motor Driver with radiator.

User questions & answers

Question:	Can i use a 12v 2a power supply for this
Answer:	I don’t believe they have ferrous materials. As a test I attempted to pick them up with a magnate which they were not attracted
Question:	how do I configure this so that the A axis duplicates the X axis
Answer:	It works with PS3, not too sure about PS4.
Question:	The arduino cannot connect to a usb port. i have an original arduino that connects fine. any ideas
Answer:	helloYou can connect a joystick and Max 12 buttons to this encoder. You can use it to player the game by Arcade joystick & arcade push buttons. You can use just 4 of 12 buttons. No problem at all. Thanks. SincerelyAmy
Question:	Do the heatsinks come with thermal adhesive
Answer:	There is no info. It will work because it worked on my Pi3 and Pi4. It is a standard direct input, so it will work.

Product description

Microcontroller Microchip ATmega328P

Operating Voltage 5V

USB Standard Type B

Digital I/O Pins 14

PWM Digital I/O Pins 6

Analog Input Pins 6

Flash Memory 32 KB

SRAM 2 KB

EEPROM 1 KB

Clock Speed 16 MHz

• This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs
• Arduino Uno is the most used and documented board in the world
• "Uno" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0, now evolved to newer releases
• It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button
• Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users

User questions & answers

Question:	Does it come with a usb cable
Answer:	Made in Italy. Correct LED color and screen printing on mine. Don't know why the other reviewers had issues, but as of June 2013 the Arduino is authentic.
Question:	Are the boards sold by Mp3Car Store genuine? Order is fulfilled by Amazon but some sellers are selling fake boards
Answer:	Your best bet is probably gonna be contacting the manufacturer. Unless you can find lengths of key stock shaped the same, and cut down to what is needed... but that is just a guess. Good luck.
Question:	Do these come with the arduino.org label and not arduio.cc? There was a falling out and to support original founders they need to be arduino.cc
Answer:	The box says 16 3/4".
Question:	Is this an original Italy made Arduino?? or china product
Answer:	It comes with a set of 2 Jack stands.

Product description

This is the ultimate Arduino Uno Starter kit by Vilros . It has enough components to get you started making your own Arduino Projects.



This kit includes a 72 page full color Instruction Manual giving you a full introduction to Arduino programming as well as step by step tutorials on how to use each component in this kit.

The kit also includes a 16x2 LCD Display for use with the "Hello World" and all the other Arduino LCD projects

This Kit is recommended for the beginner interested in leaning the basics of Arduino programming as well as the expert in Programming. The kits has a value of $100 in components, that's over 40% in savings!.





Once you've gone through the instruction guide and mastered the basics of each component go ahead and make your own project combing one or many components.

With this kit you will learn what Arduino is all about and how it is used.

You will learn the basics of Electrical Circuits.The manual will also explain what a bread boards is and how its used.



Arduino is based on C/C++ programming language so we will walk you through the basics to get you started.





Kit Content



1X Arduino Uno R3

1x 16x2 LCD Module With Presoldered pinheaders

1X Arduino & Breadboard Holder

1X Bread Board

1X Shift Register

2X 2N3904Transistors

2X 1N4148 Diodes

1X DC Motor with wires

1X Small Servo

1X 5V Relay

1X TMP36 Temp Sensor

1X 6' USB Cable

65X Jumper Wires

1X Photocell

1X Tri-color LED

10X Red LED

10X yellow LED

1X 10K Trimpot

1X Piezo Buzzer

2X Big 12mm Buttons

45X 330 Resistors

45X 10K Resistors

• The ulitamate Arduino Uno kit to get you started with hundreds of arduino project
• Includes the Arduino Uno Rev3 Board
• Bread Board -- Holder -- Jumper Wires -- USB Cable -- LEDs -- DC Motor -- Small Servo -- Relay
• Includes 16x2 LCD with soldered Pin header
• 72 page full color Instruction Manual

User questions & answers

Question:	is this Arduino Uno R3 board
Answer:	How many jumpers are included in this package?Is it the same as in the picture? Yes, just like the picture, 3 x 40-pin male-female jumper wire, 3 x 40-pin male-male jumper wire, 3 x 40-pin female-female jumper wire, 360 jumper wires in this package.
Question:	any suggestions for a cheaper but still great starter kit. without needing anything extra to work
Answer:	Transmitters w with about 2.75 grams each with antenna. Receivers with 2 grams each with antenna. I hour you get some good one. I had to go reorder several times to get 5 good ones.
Question:	can a ten year old understand the manuel
Answer:	This is meant to be used with an Arduino control board, of which there are various types. Otherwise, you would need to design a 5V circuit for a DIY setup to control the output. That is a question beyond this forum.
Question:	What can i build with it
Answer:	yes

Product description

ELEGOO Upgraded 37 sensor modules kit is the most useful and highest cost performance sensor kit in market. It is 100% suitable for beginners. And it is also 100% compatible with Raspberry PI and STM32. But if you want to use it with Raspberry PI and STM32, you may find the tutorial by yourself. We only offer the tutorial in our CD. The kit has only sensor modules, if you want to use it, you will need the wires and controller boards. Warning Tip: The input voltage of Elegoo Power Supply Module is 6. 5v - 9v (DC) via 5. 5mm x 2. 1mm plug . Please DO NOT over charge it otherwise it will burn your board and chips. Component listing: 1 x Joystick Module 1 x Relay Module 1 x Rotary Encoder Module 1 x DS-1307 RTC Module 1 x Ultrasonic Sensor Module 1 x HC-SR501 PIR sensor Module 1 x Flame Sensor Module 1 x Linear Hall Module 1 x Metal Touch Module 1 x Digital Temperature Module 1 x Big Sound Module 1 x Small Sound Module 1 x RGB LED Module 1 x SMD RGB Module 1 x Two-tone Color Module 1 x 7 Color Flash Module 1 x Laser Emit Module 1 x Shake Module 1 x IR Receiver Module 1 x IR Emission Module 1 x Tilt Switch Module 1 x Button Module 1 x Active Buzzer Module 1 x Passive Buzzer Module 1 x 18B20 temp Module 1 x Photo-resistor Module 1 x Temperature and Humidity Module 1 x GY-521 Module 1 x Photo-interrupter Module 1 x Tap Module 1 x Membrane Switch Module 1 x Avoidance Module 1 x Tracking Module 1 x Magnetic Spring Module 1 x Water Lever Sensor 1 x Power Supply Module 1 x LCD1602 Module (with pin header)

• Updated from the old version (others): Received great ideas from our customers and adopted in this upgraded kit.
• Removed useless modules like light cup and mercury module, heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc.
• Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. If you prefer download the tutorials online from the official website
• 100% compatible with Arduino official IDE, Raspberry Pi and STM32.
• Note: To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.

User questions & answers

Question:	Is there an available pdf version of the cd-rom
Answer:	This fingerprint scanner needs a micro controller with a firmware that can operate the fingerprints that are scanned and stored in the device. It works with a 3.3 to 6V DC power supply and the digital interface to the micro controller requires 3.3V to 5V. If you run it off a 9V battery, you will need a voltage regulator to power this fingerprint scanner as well as the micro controller.
Question:	ok for 8yr old
Answer:	Yes it is. However, you must buy the cable TTL Serial, this is crucial for establishing the connection with your arduino.
Question:	Are the data/specification sheets for the sensors provided
Answer:	The device works with power from 3.3V to 6V. It should work fine with 3.3V Raspberry Pi signals. Make sure you power the fingerprint module with the same 3.3V DC
Question:	Lesson 26: the tutorial does not give the meanings of the signal pins clk, dt, and sw. also, can anyone make sense of the "principle" text
Answer:	Yes you should be able to use it with rasp pi. Youll need the code which is python based. Here's a link to it. https://github.com/QuickGroup/pyGT511C3

Product features

Sensor kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo 37-in-1 sensor kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists for starters, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

Detailed and easy-to-follow tutorial helps you learn electronics without problems

An enjoyable and educational experience is definitely the priority option to learn electronics. Our detailed tutorial with 31 lessons ranges from simple projects like how to monitor temperature and humidity with DHT11 sensor to complex projects like how to achieve the goal of timing control switch using a 1 channel relay module. Easy to understand and easy to follow.

Schematics and wiring diagrams are also presented in out tutorial, which helps you better understand why those sensors are connected in that way. Besides that we also have the IDE for programming codes ready in the CD and our website. If you are a professional and prefer a little DIY you can also edit the codes as you wished and make it more personalized.

DHT11 Temperature and Humidity sensor

DHT11 digital temperature and humidity sensor is a composite sensor which contains a calibrated digital signal output of the temperature and humidity. The dedicated digital modules collection technology and the temperature and humidity sensing technology are applied to ensure that the product has high reliability and excellent long-term stability. The sensor includes a resistive sense of wet components and a NTC temperature measurement devices, and connects with a high-performance 8-bit microcontroller.

HC-SR501 PIR Motion Sensor

PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. PIRs are basically made of a pyroelectric sensor, which can detect levels of infrared radiation. Everything emits some low level radiation, and the hotter something is, the more radiation is emitted.

GY-521 Triaxial acceleration triaxial gyroscope sensor

GY-521 six-axis sensor usually consists of two which are accelerometer and gyroscope. The GY-521 is a 6 DOF (Degrees of Freedom) or a six axis IMU sensor, which means that it gives six values as output. Three values from the accelerometer and three from the gyroscope. It is also a sensor based on MEMS (Micro Electro Mechanical Systems) technology. Both the accelerometer and the gyroscope is embedded inside a single chip. This chip uses I2C (Inter Integrated Circuit) protocol for communication.

Product description

For boards and shields, stacking is extremely important. By stacking boards and shields can be placed properly and extra work like soldering or wiring is kept at minimum. The new products compatible with Arduino UNO R3 platform is generally intented to be stacking-friendly. Shield Stacking Headers compatible with Arduino is an important tool used for that purpose.

• Pack of 5 sets
• Each set has 1x1*10p header, 2x1*8p header, 2x1*6p header, 1x2*3p header
• Plastic height is 8.5mm, pin length 11mm, pitch 2.54mm(0.1"), solid square pins
• Full compatible with Arduino UNO R3 & Leonardo shields

User questions & answers

Question:	Pack of 5 sets ? if each set has 1x1*10p header, 2x1*8p header, 2x1*6p header, 1x2*3p header, does that mean i would receive 5 times what's shown
Answer:	I get earlier than the date they give you much much earlier mine took about 1 week only
Question:	Are these headers made of ferrous metals? I want to use them with a compass
Answer:	If you buy a 2.5 inch SSD from the store it will fit, 100%. However, I took apart a slim external hdd because it was 2TB, thinking that it would fit. It states on the hdd itself that it’s 2.5 inches. But it doesn’t fit. I think it might be a mm too thick. Don’t know if that applies to internal 2.5 inch hdd's, but I know for a fact that 2.5 SSD’s fit.

Product description

Package included：

1x8-pin Female Header x 6

1x10-pin Female Header x 3

2x3-pin Female Header x 3

1x6-pin Female Header x 3

Each set has five，15pcs in Total

• Stacking headers are like the wheel to the Arduino civilization, which is incredibly simple and useful.
• Featuring standard 2.54mm spacing, the pin length is approx. 12 mm/ 0.47 inch.
• Pack of 3 sets.
• 100% Compatible with Arduino UNO R3.
• Widely applications: these extra stacking headers can be widely applied for PCB circuit boards in electronics, electrical appliances, and meters so on.

• Free tutorial in cd, better price, better service. (With technical data)
• 2. 8 inches colorful display lcd screen
• With touch pen inside, you can use it more easily
• Not including the uno R3 controller board and usb cable
• We have always cared about the customer experience and improve the product function details

User questions & answers

Question:	I hooked it up to my arduino and the only program that worked was the scrolling color Adafruit programs gave errors. Need some help here in detail
Answer:	Yes! Fits perfectly!
Question:	I have an uno wifi. if this display uses up the analog pins, can i add a mux board to be able to connect analog sensors? need the sd card
Answer:	Length of the wires: 20 cm (7.87 in)
Question:	Will this work on a at mega328p arduino uno
Answer:	I am pretty sure they can. They have standard male and female pin connectors on the ends, and should be compatible with pretty much any breadboard.
Question:	Is this an actual touch screen or do you need to use the stylis
Answer:	No, it needs your own preparation.

Product features

Features :

（1）Compatible with Arduino UNO and Mega2560, and can be connected directly by inserting the pin into the interface without wire.

（2) Compatible with all kinds of 5V or 3V MCU with 5V-3.3V change-over circuit.

（3）320X240 HD resolution, can be used as a touch screen.

（4）Adopting 8-bit parallel bus, quicker and smoother refresh than SPI.

（5）Offer support with Arduino libraries, simplify program development.

（6）With Micro-SD card circuit, easy to expand the scope of the test.

Component listing:

1pcs 2.8 Inches TFT LCD Touch Screen

1pcs touch pen

1pcs CD with tutorial

Basic Specifications

Electronic Specifications

Dimension

Product description

1. Reed switch module ×1
2. Small sound (Microphone) module ×1
3. Relay module, 5V ×1
4. Hall magnatic module ×1
5. Joystick game controller module ×1
6. Two-color LED module ×1
7. flash module, 7 color ×1
8. Light cup module ×1
9. Bicolor LED module, 3mm ×1
10. Tracking module ×1
11. Big sound (Microphone sensitivity) module ×1
12. Car avoid obstacle module ×1
13. Flame module ×1
14. Touch module ×1
15. Linear hall module ×1
16. Digital temperature module ×1
17. Temperature and humidity module ×1
18. Buzzer (Active) module ×1
19. Passive buzzer module ×1
20. Button module ×1
21. Ball switch module ×1
22. Temperature module, 18B20 ×1
23. Light blocking module ×1
24. IR receiver module ×1
25. Shock module ×1
26. Rotary encoders module ×1
27. Photoresistor module ×1
28. Analog hall module ×1
29. IR emission module ×1
30. Analog temperature module ×1
31. Tilt switch module ×1
32. Mini reed module ×1
33. Finger detect heartbeat module ×1
34. Laser emit module ×1
35. Tap module ×1
36. RGB LED module ×1
37. RGB SMD LED SMD module ×1
38. OLED module, 0.96" ×1

• 38 sensor modules and 1 leaflet in a plastic box.
• A complete set of the most commonly used electronic components for Arduino projects.
• A 0.96 OLED included.
• 100% compatible with Arduino UNO R3 MEGA 2560, Raspberry Pi and STM32.
• The use of DEYUE sensor kits requires basic electronics knowledge. Tutorial information is easy to find online. If you have a problem with this, please send us an e-mail. We will provide specific information for you.

User questions & answers

Question:	Need link to tutorials, pinouts, and part model numbers please
Answer:	This kit does not contain any board that can allow it to be connected to the internet. You need to get a kit for IoT or WiFi (ESP8266 and others) or Ethernet shield.
Question:	Where can i get the tutorials for all these sensors
Answer:	Yes. That is correct.

Product description

Features

Resistive touch screen TFT LCD, 4inch, 480x320 resolution

Standard Arduino interface, compatible with development boards like : Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO

Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control

PWM backlight control, allows to adjust the backlight to a comfortable level

Micro SD slot, provides an easy way to store photos for displaying

Controlled via SPI, only a few Arduino pins are used

Comes with STM32 and Arduino examples, convenient for porting

Package Content



4inch TFT Touch Shield x1





100% original from Waveshare,offer technical support!

• Resistive touch screen TFT LCD, 4inch, 480x320 resolution
• Standard Arduino interface, compatible with development boards like : Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO
• Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control
• PWM backlight control, allows to adjust the backlight to a comfortable level; Micro SD slot, provides an easy way to store photos for displaying; Controlled via SPI, only a few Arduino pins are used

User questions & answers

Question:	How do I buy these in bulk
Answer:	Hello, there is a sticker on the back of the heat sink, which can be glued to the A4988. sometimes the system may delivered this Q&A delayed to us, any problem, you also could contact us by email([email protected]), we will reply to you in 24 hours, thanks for purchasing kuman CNC Shield Expansion Board.
Question:	where is this made
Answer:	Yes. There are three options to connecting to an I2C bus. The 2x3 header near the center of the board; or, either pins A4 and A5 or the last two pins nearest the reset button.
Question:	Is this compatible with Arduino Mega
Answer:	This kit is more for intermediate to advanced Arduino users. The best kits for beginners are the ARDX and the SparkFun Inventors Kit as they include the book with project descriptions and the Arduino or Arduino compatible (RedBoard in case of the SparkFun Kit) board inside the kit.

Product description

Duemilanove used in conjunction with ProtoShieldprototype extension boards, used to build the circuit prototypes directly on the board welding components, mini bread plate above can also be connected to the circuit.Sided adhesive connection between the bread board and the board, bread board and the circuit board is sold separate.



The ProtoShield prototype expansion board with two LEDs and two buttons circuit, can be used directly, pin and power have been elicited, very fit and For Arduino with the build circuit prototype.



Features:

Small soldering area.

All pins are brought to the top level.

5V, GND, and Raw pins are exposed as well.

SOIC place for IC.

The mini breadboard has 170 tie points.

Prototype Size:7cm x 5.5cm x 2cm .

Mini breadboard size: 4.4 * 3.4 * 1cm .



Package Included:

2 * Uno R3 Prototyping Shield Prototype Expansion Board

2 * Mini breadboard

• 2 Sets of UNO Proto Shield prototype expansion board with SYB-170 mini breadboard
• SYB-170 Mini Breadboard Based for arduino Compatible with UNO R3
• The ProtoShield Prototyping Board comes with two LEDs and two pushbutton circuits that are ready to use, with all pins and power supplies present
• Used in conjunction with the Duemilanove ProtoShield prototype expansion board, the circuit is used to build a prototype
• Components can be soldered directly on the board, or through the mini breadboard above.The breadboard is connected to the circuit board through a double-sided adhesive

User questions & answers

Question:	Are the pins already soldered on the board or do I have to solder all those myself
Answer:	Yes, you can. I have built a CNC plotter and have supplied 12v 2Amps.
Question:	This has 2 push buttons. One is the reset, but what is the other push button used for? And is there a diagram if the button can be used in circuit
Answer:	Goto here "http://www.zyltech.com/arduino-cnc-shield-instructions/" This will help.
Question:	how does the reset button connect to the reset button on the Uno
Answer:	YOUTUBE has videos on what you need to do next

• It can be plugged directly into the Arduino controller. Newest Vision UNO R3 compatible.
• It offers a reliable and convenient solution for connecting more Arduino components to the Arduino controller
• Direct plug puzzle board, NO soldering needed

User questions & answers

Question:	On the side with the digital pins, what what do the unmarked two terminals near the silscreened word "screw" connect to
Answer:	The material is probably targeted to a 7th grade reading level, or a lexile of about 600. Using these kits requires an understanding of discrete electronics and computer programming. If your child hasn't already used the electronic project kits to build things like AM radios or flashing lights, I would start there instead. They would also need to get an understanding of programming basics. It will be a big time investment for you. I'm not saying it can't be done. I was working with electronics at 8, and programming in BASIC at 10.
Question:	Is this compatiable with uno wifi r
Answer:	You are kind of limited in creating stuff if you use only the parts that are included in this kit, but you can still build something great if you use your imagination, this kit is basically only for learning, for example starting with blinking leds and how to program it to do it. One of my first projects was modifying a plasma ball (a toy you can search up in internet) so it would turn on and off in synchronization with some kind of music, i had to modify that toy a bit and build a small circuit on a breadbord using a relay (because including transistors couldn't withstand the voltage), and looked up some tutorials about coding it because programming it was very complex, but in the end it came out great and i have gained a lot of experience. You can just search on youtube "arduino projects" and you will see all the amazing stuff people have made with it.

Product features

Product description

• 1 Pair of Screw Shield for Arduino UNO R1 - R3
• It can be plugged directly into the Arduino controller. New Vision UNO R3 compatible.
• It offers a reliable and convenient solution for connecting more Arduino components to the Arduino controller
• Direct plug puzzle board, NO soldering needed