14 best raspberry pi starter kit for kids

• This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors.
• It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note Only provide arduino tutorials, not Raspberry Pi tutorials.
• Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires.
• They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well.
• 37 Sensor kit came nicely packed in a carrying case with every single sensor wrapped in plastic and in its own compartment.

User questions & answers

Question:	Do any of the kits with educational curriculum? need for reimbursement
Answer:	Yes, it will fit, but do you really need access to all 40 pins? Your project will be much more compact if you only bring the required connections from the PI to the proto PCB. Plus, unless you shorten the ribbon cable, mounting the PI to the Perma Proto in close proximity leaves a lot of excess ribbon cable to deal with.
Question:	Does this come with breadboard
Answer:	Sure is. Here is a link that shows the details with photos and specifications... https://learn.adafruit.com/introducing-the-raspberry-pi-zero/gpio-header-options
Question:	Does it have raspberry pi code examples
Answer:	The GPIO pinout is the same as my raspberry Pi 3 . It should work on the Pi 4 .
Question:	Does this have a level sensor or something similar to that? Something that measures something that is straight or balanced or even like a pitch angle
Answer:	Looks fine to me!

Product features

Turn ON/OFF LED

Some of these modules are extremely simple and basically just breakout the pins of a common device (like an LED or button) to a more larger format that is more prototyping friendly. Just simply connect a button sensor to control the led sensor on or off.

Detecting Flame

This flame sensor can be used to detect fire flame or other lights with wavelength stands at 760nm ~ 1100nm. Perhaps you can install it to monitor the kitchen or make an alarm when detecting the flame source.

Temperature and Humidity Monitor

This DHT11 Temperature and Humidity Sensor is a composite sensor which contains a calibrated digital signal output of the temperature and humidity. Use this sensor to detect the ambient temperature and humidity around you.

Traffic Light Senor

Upload the program to make the red, green and yellow LED on the module automatically simulate the traffic light turning on and off.

Moisture Sensor

The sensor is set with two probes which can be inserted into the soil to detect the moisture content. The higher moisture (less resistance), the higher conductivity the soil has. With the help of this sensor, the plant can remind of you: I need water.

Buzzer Beeping

In this project, you will learn how to generate a sound with an active buzzer module.

Water Level Sensor

This sensor measures the volume of water drop and water quantity through an array of traces of exposed parallel wires.

It is designed for water detection, which can be widely used in sensing the rainfall, water level, even the liquate leakage.

This sensor bundle kit allows you to move from the simple and graphical to the hardware and coding level of DIY electronics.

You can make 37 fun projects following our step-by-step tutorials on the wiki. More projects please see the tutorial to start off!

• Project 1: White LED
• Project 2: RGB LED
• Project 3: Traffic Light
• Project 4: Buzzer Beeping
• Project 5: Passive Buzzer
• Project 6: Motor Module
• Project 7: Digital Push Button
• Project 8: Collision Flash
• Project 9: Line Tracking

Product description

Make some delicious Raspberry Pi concoctions with our exclusive Mega Toolbox Starter Kit, complete with a Raspberry Pi 3 Model B+, the newest board model, and plenty of fun extras. Makes the perfect gift! 

Set up a home media center, create a retro game console, program a photo booth, and so much more. Perfect for ages 12-112, the Raspberry Pi Mega Toolbox Starter Kit truly has something for everyone. 

Why buy the Mega Toolbox Starter Kit? Our starter kit doesn't cut corners and leave out important components. With this kit, you can get started with your Pi immediately and let your imagination run wild. Including an SD card pre-loaded with NOOBs, you can plug in the Pi and start playing right away!  In the 200+ page Raspberry Pi manual in the kit, you'll find project information and answers to common questions about this tiny powerhouse! 

Get started with the Raspberry Pi Mega Toolbox Starter Kit from Facet Make It today! 

Our kit has the best component selection and includes dozens of fun extras like sensors and UV LEDs. All components come with a 90 day limited warranty and are backed by the Facet Make It Promise: Fun and Inspiration in Reach! 

Contents: 

1X Raspberry Pi 3 Model B+ Board 

1X Case 

1X 16GB SD Card Loaded with NOOBS 

1X 2.5A Power Supply 

1X HDMI Cable 

50X LEDs – 10 COLORS including UV LED (Purple), Pink, Orange and More 

1X Raspberry Pi Manual (200+ Page Bestselling Raspberry Pi Reference Book) 

Set of Heatsinks 

40X Female-Male Jumper Wires 

10X Female-Female Jumper Wires 

1X 840-Point Solderless Breadboard 

25X 330 Ohm Resistors 

25X 10K Ohm Resistors 

25X 560 Ohm Resistors 

2X Momentary Tactile Buttons 

1X USB to TTL Adapter 

1X Photocell (Photoresistor) 

1X 1.0uF Capacitor

• NEW MODEL! - Genuine Raspberry Pi 3 Model B+ Computer
• HUGE PROJECT VARIETY - Greatest Selection of Electronic Components for Tinkering and Projects
• SPECIAL COMPONENTS ONLY AVAILABLE IN OUR KIT - Includes 10 Colors of LED diodes including UV and rare colors, sensors, breadboards
• 200 PAGE PROJECT IDEA BOOK IN KIT - Top Instructional Book (200 Page Manual) Included (WITH Project Ideas)
• OUR SIGNATURE TOOL BOX KIT - Packaged in large tool box for convenient transportation

• This kit worked as Raspberry Pi 3 B+ kit provides up to 80 components and modules, to start with making LED blinking, you will learn 32 interactive courses, it is the best tool to learn Raspberry Pi
• Includes a RPI GPIO-PCF8591 Shield, T-type Breadkout board, Ribbon Cable, Ultrasonic Sensor, Buzzer, Clock Module, 1602LCD etc. The Pi hat and header makes it super easy to interface with your raspberry pi. Note this kit DOES NOT include the Raspberry Pi SoC.
• You will get detailed PDF/wiki tutorials with C languge example. This kit is a great way for you or your kids to get the basics of circuitry and electronics.
• Compatible models -> Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT included in this kit)
• Technical support and after-sales service are always available

User questions & answers

Question:	Where can I find the tutorial codes for python
Answer:	My application used CodeBlocks C++ with the wiringPI library. I have not tried it with Node.js but if you can link the wringPi library it might work.
Question:	Where can I find the tutorial codes for python
Answer:	6" (152mm)

Product features

A Funny Kit to Learn RPI

This is a funny set to learn Raspberry Pi. You can assemble and program various components on your own to complete a variety of interesting experiments.

80 Components and Modules

This is a starter kit with RPI GPIO-PCF8591 Shield, LEDs, resistors, potentiometers, buzzers, sensors, modules, breadboard and wires. It is almost meet your all requirement for experiment.



 

Nice Package As a good Gift

This kit with beautiful packaging has passed the ROHS and CE certification. It is more safety for children to use it. so it can be used as a good gift.

32 Interactive projects

Learning Courses including  Hello World, LED Blinking, Breathing LED, Traffic Light, LED Chasing Effect, Button-controlled LED, Passive Buzzer, Flame Sensor......

Every course we have provided a detailed wiring diagram, code and operating video, helping you to learn this kit step by step.







 

Controlling 1-digital LED Display

You can use 74HC595 chip to control 1-digit LED Display. Using 3 GPIO ports can control LED display, showing the number from 0 to 9.

DS3231 Clock Display

You can connect DS3231 module to Raspberry Pi, and set a starting time in the code. Finally, you can se the timing begin from the starting time on Raspberry Pi terminal.

IR Alarm Experiment

You can use PIR Motion Sensor to detect whether there is someone moving nearby. If detecting people, LED will be on and "Somebody is in this area!" will display on the terminal; otherwise, LED off and display "No one!"

DHT11 Temp & Humidity Experiment

You can use our DHT11 Temperature and Humidity Sensor to detect the temperature and humidity of current surroundings, showing the value on Raspberry Pi terminal.

Why Choose Us？

• Elaborate manual
• Practical examples of source code
• Upgraded based on user feedback
• Technical support via email
• Our step by step project course to get you building cool projects, even with no prior experience
• This course is a compilation of 32 projects that you can build by following clear step-by-step instructions with schematics and downloadable code.
• Most of components of this kit has got CE and FCC Certification, they are made from green materials and technology.
• Everything comes in a nice plastic case to keep organized, plus original boxs and anti-static bags to store modules and small parts.

Product description

Build and code your very own computer? Easy as pi.

Aspiring techies everywhere can master computer science 101 at home or in the classroom with the Raspberry Pi 3 Ultimate Starter Kit. This all-in-one barebones bundle arrives with the latest high-speed, energy-efficient tools necessary for building your very own credit-card sized computer. The lightning-fast model B motherboard features a 64-bit quad core central processing unit, integrated Wi-Fi, Bluetooth Low Energy (BLE) and 1GB of RAM. For the first time ever, our complete set also includes an innovative 7” touchscreen display, eliminating the need for a monitor, mouse or keyboard. Just use the provided HDMI cable, 16GB micro SD card, heatsinks, noise-filtered power source and specially designed protective case to craft an enjoyable educational gadget. This is the micro computer that changed the world—and it’s easier than ever!

What You Get

• 1 x Raspberry Pi 3 Ultimate Starter Kit
  
  
• 1 x Model B motherboard
  
  
• 1 x 7” touchscreen
  
  
• 1 x 16GB micro SD card with NOOBS
  
  
• 1 x 6ft HDMI cable
  
  
• 1 x Power adapter
  
  
• 2 x Heatsinks
  
  
• 1 x Official case
  
  
• Quick start guide
  
  
• An amazing gift for pros (and dummies)!

Specs & Details

• 1.2GHz 64-bit quad-core ARMv8 CPU
  
  
• 802.11n Wireless LAN
  
  
• Bluetooth 4.1 (BLE)
  
  
• 1 GB RAM
  
  
• 4 USB ports
  
  
• 40 GPIO pins
  
  
• Full HDMI port
  
  
• Ethernet port
  
  
• 3.5mm audio/composite video
  
  
• CSI/DSI
  
  
• Micro SD card slot
  
  
• Videocore IV 3d graphics core

How to Enjoy

• Get out-of-the-box ease for your high-tech hobby
  
  
• Experiment endlessly while you learn the basics
  
  
• Bring the computer sciences into the classroom
  
  
• Let your imaginative brain dream big—and build bigger!
  • COMPLETE RASPBERRY PI 3 SET – Barebones Bundle Includes Everything You Need to Build a Mini Computer at Home; Great for Beginners, Pros, Adults & Kids
  • RASPBERRY PI 3 MODEL B MOTHERBOARD – Credit Card Sized Computer Features Super Fast 64-Bit Quad Core CPU, Built-In Wifi, Bluetooth Low Energy & 1GB RAM
  • 7” TOUCH SCREEN DISPLAY – Full Color 800 x 480 Resolution Portable Adapter Board Connects Via GPIO or USB; 10-Finger Detection Great for Media & Gaming
  • 16GB MICRO SD CARD – Comes Preloaded with Raspberry Pi 3 Compatible Version of NOOBS & SD Adapter Card; Install & Run Countless Operating Systems
  • ADDITIONAL ACCESSORIES – All-in- One Package Also Includes New Official Case Enclosure, 2-Piece Heatsink Set, 6-Foot HDMI Cable & 2.5A Power Charger

User questions & answers

Question:	Is the hdmi port still accessible with this case
Answer:	No it doesn't have enough as delivered if you have Dremel tool you could make room.
Question:	What's the largest and fastest sd card i can purchase for this
Answer:	This kit is actually an already built (very small) computer and some external components intended for hobbyists who want to tinker with something inexpensive and small -- not really for gaming. It could probably power an emulator for like Nintendo or Sega but it probably won't work for most modern computer games. Regarding 'a better one that won't break the bank' - I'm not sure what your budget is, or what types of games he wants to play. He should probably start by googling the game name + "pc hardware requirements" i.e. https://www.google.com/#q=portal+2+pc+hardware+requirements - That will tell you (at minimum) what hardware you need. Usually getting hardware that's a little higher end (especially things like better graphics cards, SSD, more memory) will make game play a little nicer and allow for better graphics. From there he can figure out where to get components to build that computer using http://pcpartpicker.com/ and figure out how much the build will cost.Good luck!
Question:	does anyone have any good youtube link for this since there is no instruction
Answer:	No, because it doesn't need one. The raspberry pi 3 has wifi and bluetooth 4.x already incorporated in it's onboard circuitry. Check the specs of the raspberry pi on their official site.
Question:	How do i rotate the screen
Answer:	Yes, It has built in WiFi and bluetooth BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board

• Includes Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core CPU (4GB RAM)
• 32GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS, USB MicroSD Card Reader
• CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply (US Plug) with Noise Filter, Set of Heat Sinks, Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)
• CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

User questions & answers

Question:	What is noobs
Answer:	There's actually a bracket built onto the inside of lid (can't remember if it's the top or bottom. I think bottom) that your 2.5" drive slides into. It's a tight fit, so no need for screws. It has a short SATA cable that runs to the board and provides both power and data.
Question:	How do you attach the heat sink? This is my 1st Pi
Answer:	HX318LS10IBK2/16 is an over kill. You are not going to over clock or have heath issue. Any SODIMM DDR3 1600 or faster but make sure they support 1.35V.
Question:	This kit does not include a fan, right
Answer:	Hello, thank you for your question.Yes, it will recognize and support both at the same time. You can install and use a M.2 SSD and 2.5" device at the same time. You will just have two separate storage options if using both. Best Regards, MITXPC
Question:	My son is asking for this and he is 11. Appropriate
Answer:	Greetings,Great question!The Iris Graphics 6100 is indeed capable of some light 3D gaming. There are a few very good videos showcasing the real-world performance of the Iris 6100 on YouTube. You'll find videos referencing the two titles you've inquired about.That being said, the NUC5i7RYH is not designed as a competitive gaming machine and you should not expect extraordinary performance for modern, 3D game titles.Best regards,MITXPC

Product features

CanaKit Raspberry Pi 4 4GB Starter Kit

An exclusive Starter Kit from CanaKit that includes the 4GB RAM version of the latest generation model of the Raspberry Pi family: The Raspberry Pi 4 4GB and everything you need to get up and running within minutes in the exciting world of Raspberry Pi!

The Raspberry Pi 4 features a 64-bit quad core processor running @ 1.5 Ghz. The CanaKit Raspberry Pi 4 4GB Starter Kit includes a premium Raspberry Pi case as well as a Samsung 32 GB EVO+ Class 10 MicroSD pre-loaded with NOOBS. Just Plug & Play!

What's in the box?

• Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core CPU (4GB RAM)
• 32GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS
• CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount
• CanaKit Low Noise Bearing System Fan
• Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter - Specially designed for the Raspberry Pi 4 (UL Listed)
• CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)
• Set of Heat Sinks
• USB MicroSD Card Reader
• CanaKit Quick-Start Guide and CanaKit GPIO Reference Card

CanaKit Black Case

Premium quality ABS 3-piece plastic case specially designed for the Raspberry Pi 4 with GPIO access.

CanaKit Low Noise Fan

CanaKit Exclusive Low Noise Bearing System Fan

CanaKit PiSwitch

Convenient On/Off Power Switch with LED indicator for the Raspberry Pi.

Samsung 32 GB EVO+

High performance EVO+ Class 10 MicroSD card pre-loaded with NOOBS.

CanaKit 3.5A USB-C Power Supply

CanaKit 3.5A USB-C power supply (UL Listed) is specially designed and tested for the Raspberry Pi 4. This power supply incorporates a noise filter to provide the highest stability.

CanaKit Micro HDMI Cable

CanaKit Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)

USB MicroSD Card Reader

Set of Heat Sinks

Product description

Component listing: 1pcs UNO R3 Controller Board 1pcs LCD1602 Module ( with pin header) 1pcs Breadboard Expansion Board 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs Joystick Module 1pcs IR Receiver 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Ultrasonic Sensor 1pcs DHT11 Temperature and Humidity Module 1pcs 9V Battery with DC 1pcs 65 Jumper Wire 1pcs USB Cable 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Potentiometer 1pcs 5V Relay 1pcs Breadboard 1pcs Remote 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 2pcs Photo resistor 1pcs Thermistor 2pcs Diode Rectifier (1N4007) 2pcs NPN Transistor (PN2222) 1pcs IC 74HC595 120pcs Resistor 10pcs Female-to-male DuPont Wire.

• Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
• The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
• Lcd1602 module with pin header (not need to be soldered by yourself)
• This is the upgraded starter kits with power supply module, 9V battery with dc
• High quality kite with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.

User questions & answers

Question:	which charger i need
Answer:	This kit is easy to learn Arduino and very complete.
Question:	The CD the came with my kit was blank. Can anyone recommend a good tutorial for a complete novice
Answer:	Yes I program mine with A raspberry pi the zero-w to the pi 4 ,8 gig will work !!
Question:	What's the catch? It seems to good to be true
Answer:	It's definitely not too complicated as long as there's the interest, patience, and persistence.
Question:	Is the elegoo uno the same as an arduino uno or is it modified in any way
Answer:	Here is the link to download the latest version: https://www.elegoo.com/tutorial/Elegoo%20The%20Most%20Complete%20Starter%20Kit%20for%20MEGA%20V1.0.2017.10.31.zip

Product features

Compatibility with Official Arduino IDE, Software, Sendsors and Codes

Arduino is an open-source platform used for building electronics projects. Arduino consists of both a physical programmable circuit board (often referred to as a microcontroller) and a piece of software, or IDE (Integrated Development Environment) that runs on your computer, used to write and upload computer code to the physical board.

For the reason of open source, the manufacture of Arduino boards and software distribution by anyone is permitted. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

Elegoo is one of the manufacturer on the market, whose clone products are compatible with the official Arduinomicrocontroller boards, they can use the official Arduino software, sensors and codes.

Learn Electronics and Programming with ELEGOO

The UNO boards can be used as the brains behind almost any electronics project. UNO can interact with buttons, LEDs, motors, speakers, GPS units, cameras, the internet, and even your smart-phone or your TV! By connecting the UNO board with a personal computer via a USB cable and uploading programs to the board, users can create digital devices and interactive objects that can sense and control objects in the physical and digital world like robots or even honest fortune-telling machines.

For this Elegoo Super Starter Kit, we provide a 24-lesson tutorial, introducing the basic setting of the software IDE, the working principles of the sensors and the simple program to enable the UNO board to control the sensors.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

74HC595 and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

4 digit 7 segment display

7 segment displays consist of 7 LEDs, called segments, arranged in the shape of an “8”. Most 7-segment displays actually have 8 segments, with a dot on the right side of the digit that serves as a decimal point. When using 4-digit 7-segment display, the common anode or common cathode pin is used to control which digit is displayed. Even though there is only one digit working, the principle of Persistence of Vision enables you to see all numbers displayed because each the scanning speed is so fast that you hardly notice the intervals. By building the circuit and editing the program, users can make a simple display showing certain numbers, or more complexly, a count-up timer or a elecrical rolling dice.

Stepper Motor

Stepper motors are DC motors that move in discrete steps. They have multiple coils that are organized in groups called "phases". By energizing each phase in sequence, the motor will rotate, one step at a time.

With a computer controlled stepping you can achieve very precise positioning and/or speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.

the simplest way of interfacing a unipolar stepper motor to UNO board is to use a breakout

for ULN2003A transistor array chip, applying voltage to each of the coils in a specific sequence.

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fjgTR



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

  ...

(Download tutorial for details)

  ...

Chapter 26 WebIOPi & IOT

 Project 26.1 Remote LED

Chapter 27 Solder Circuit Board

 Project 27.1 Solder a Buzzer

 Project 27.2 Solder a Flowing Water Light

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 18 Infrared Motion Sensor

 Project 18.1 Sense LED

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 434-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 223 items for 57 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	are there any tutorials for how to connect everything?? Not looking for coding tutorials yet
Answer:	Dear customer, Thank you for your question. You can download tutorial first via link below: https://github.com/Freenove/Freenove_Ultimate_Starter_Kit_for_Raspberry_Pi/archive/master.zip If you have any concerns, please feel free to contact us via Freenove support email. Best Regards, Freenove Support Team
Question:	Issues with the i2c module:the instructions you give in the tutorial are outdated and not applicable to the rpi3 and python3 - any suggestions
Answer:	Dear customer, We have update our tutorial(i2c configure) and code(Python) for customers. Now all Python code can run on Python 2 and Python 3. Please download again. Thanks for your question. Kind Regards, Freenove
Question:	Does it work with raspberry pi
Answer:	Dear customer, Yes, we have tested all projects in our tutorial . This kit works well with Raspberry Pi 4. And if you have any concerns, we offer technical support. Sincerely, Freenove Support Team
Question:	Are three 74HC595's used in one project? I broke one since the pins were ripped by me pulling it out of the breadboard too hard
Answer:	Dear customer, Thank you for choosing Freenove. I am sorry for the inconvenience. No, there is no project using three this chips. There just is a project using two this chips. If you broke more chips, you can contact us at [email protected] We will send you a new one for free. So don't worry. Sincerely, Freenove Support Team

• SIMPLE, EDUCATIONAL, FUN PROJECT — Control your OSOYOO Robot Car V2.0 System by Android and iOS App, allowing many additional functions such as imitation driving, WiFi controlled auto driving and battle bots (must purchase at least two kits). This intelligent, new technology supports various projects such as line tracking, object motion following, obstacle avoidance and gravity sensing control.
• PROGRAMMABLE STARTER KIT FOR KIDS, TEENS, ADULTS AND PROFESSIONALS – The OSOYOO Robot Car Kit V2.0 is fully compatible with R3 board. Great for any skill level — whether you’re a pro, enthusiast, or a beginner, assembling your new robotic car kit will help you learn to create circuits, program sensors and actuators, learn about the Internet of Things (IoT) and get hands-on programming, coding, electronics and robotics experience.
• THE BEST VALUE PACK — This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: Basic Board, USB Cable, Model X Motor Driver Module, WiFi Shield, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 5 Line Tracking Modules, 2 Obstacle Sensors, Buzzer Sensor Module, Infrared IR Remote, Receiver, & Transmitter, 18650 Battery Box, battery and charger, Voltage Meter, 2 Piece Acrylic Car Chassis, 4 Motors & Metal Motor Holders, 4 Wheels
• MORE THAN THE BASICS: ADDITIONAL ACCESSORIES INCLUDED IN DIY ROBOTIC STEM SET — 2 8-Pin Female to Female Jumper Wires (20 cm), 2 20-Pin Male to Female Jumpers (20 cm), 1 Male to 5 Female Jumper Wire, 3-Pin Female to Female Jumper, 6 Pin Male to Female Jumper, Screws & Nuts for Sensor and Module Assembly, Philips Screwdriver, Basic Tutorial CD with Video, Pictures, Sample Project Code, & Step-by-Step Instructions. Designed for Easy Assembly and Great Performance
• GROWS WITH YOUR KIDS – OSOYOO Robot Car Kit for Arduino is a perfect gift for your kids who are interested in programming, robotics, electronics, or mechanical design as it can improve logical thinking, mechanical, and electrical abilities of your kids and let your kids learn how to build and program fully-functional robots

User questions & answers

Question:	Can you use an ipad for the app
Answer:	It doesn't matter. We also test it with Pi 4B 1GB. It also works. WiFi of Raspberry Pi is not very stable. It will also influence the result. Denzel Freenove Support Team
Question:	Is this unit solely WiFi controlled? Or will it also operate by remote control
Answer:	Dear customer, Yes. The iOS app for this robot may need another 3~4 weeks. We have completed the ios app. We are testing it. Sincerely, Freenove Support Team
Question:	What Code is this written in
Answer:	We will consider this issue. Providing remote control will increase cost and selling price. Ultimately depends on user feedback. Denzel Freenove Support Team
Question:	Are there any pins left for the addition of more sensors
Answer:	I don't think so. I bought it as a Christmas present for my granddaughter and I haven't opened it yet. Judging by the box it can in I'm going to say no it does not come assembled.

Product features

WiFi Internet of Things Device

• Use this mode to set your car as a WiFi hotspot and move your car with the app
• Connect your mobile device to the same LAN and experience the modern intelligence that the 'Internet of Things' brings to home robotics

Wifi Mode Allows 3 Functions

Using WiFi mode, your robotic car can utilize 3 unique functions:

• Manual Control
• Line Tracking
• Obstacle Avoidance

Imitate Real-World Driving

• Use the app to imitate real-world driving with your iOS or Android device
• The app provides a virtual steering wheel and gear that allows you to imitate real-world driving

Includes Batteries and USB Charger

Unlike most robotic car kits, the necessary batteries and charger come included with this project.

Easy to Assemble Wifi Shield

The female connector on the WiFi Expansion Shield is clearly marked, making assembly precise and easy.

On/Off Switch on Battery Case

The battery case on your OSOYOO robot car kit comes with an easy to use on/off switch to save power when you're not using your car.

Newly Designed Wheel Attachment

This robotic project includes our updated wheel attachment design. This will allow your car to run more smoothly than most comparable products.

Perfect Gift to Learn Robotics, Arduino, Programming, Electrical and Mechanical Design

Give your child the gift of a great education — STEM skills will last a lifetime, and as more jobs become automated, this knowledge will only increase in value

• Hands-on learning: Build and create your robotic car by using the included schematics
• Learn how to assemble electronics, build and program robots, and get first-hand experience in the future of automation
• OSOYOO’s Arduino-controlled Robot Smart Car Starter Kit is the perfect gift for anyone who is interested in learning valuable STEM skills
• Whether you are getting started in robotics, or are looking to get your kids interested in STEM, our Arduino-controlled Robot Smart Car Starter Kit is the perfect combination of learning while playing

• COMPLETE RASPBERRY PI 3 (B Plus) SET - Barebones Bundle Includes Everything You Need to Build a Mini Computer at Home; Great for Beginners, Pros, Adults & Kids
• RASPBERRY PI 3 MODEL B (B Plus) MOTHERBOARD - Credit Card Sized Computer Features Super Fast 64-Bit Quad Core CPU, Built-In Wifi, Bluetooth Low Energy & 1GB RAM
• 7" TOUCH SCREEN DISPLAY - Full Color 800 x 480 Resolution Portable Adapter Board Connects Via GPIO or USB; 10-Finger Detection Great for Media & Gaming
• 32GB MICRO SD CARD - Comes Preloaded with Raspberry Pi 3 Compatible Version of NOOBS & SD Adapter Card; Install & Run Countless Operating Systems
• ADDITIONAL ACCESSORIES - All-in- One Package Also Includes New Official Case Enclosure, 2-Piece Heatsink Set, 6-Foot HDMI Cable & 2.5A Power Charger & NeeGo keyboard

User questions & answers

Question:	Im interested i. building a snart mirror. i woukd like to program alexis. need hlpful instructions
Answer:	I used wireless keyboard and mouse and USB enabled monitor. Lots of options. Not different from any other computer.
Question:	What apps are on the os? Does it have a Python program? A web browser
Answer:	This kit is Prime Eligible as of June 11, 2018.,
Question:	Does anyone have a link to the missing guide? Would be nice to know how to wire the gpio pins
Answer:	It comes with a breadboard, LEDs and switches, but very minimal instructions/documents. But you can find tons of web sites from "how to assemble" to "how to write source code" including educational exercises and experiments, because the original intention of the Raspberry Pi is to educate young kids to learn embedded computings. This is a fairly reasonable price, I think. The "bare" Raspberry Pi is $35 (you can find the price on the Wikipedia), but you will definitely need a high capacity power supply, HDMI cable, case, micro SD card, keyboard and mouse. This kit doesn't come with a keyboard and mouse. It would probably be possible to use BlueTooth keyboard and mouse, but I don't recommend, because you will definitely need them BEFORE booting the operating system. Raspbian OS (Debian-based Linux) is recommended. I have tried Windows 10 IoT but it's super slow and almost useless.
Question:	The screen is upside down cant find a setting to change it
Answer:	Yes

• ELEGOO Smart Robot Car: An educational STEM kit beginners (kids) to get hands-on experience about programming, electronics assembling and robotics knowledge. It is an integration solution for robotics learning and made for education.
• Complete Package: Contains 24 kinds of module parts including obstacle avoidance, line tracing module, infrared remote control and also you can control it via phone and tablets of Android and iOS system, etc.
• Easy to Assemble: All the module interface has been modified with XH2. 54 ports as to make it much easier and convenient to assemble the car and reduce the chances for errors.
• Refined Tutorial in CD: HD rendering instructions on how to assemble the robot car from scratch and all the necessary programs and codes are included.
• Upgraded Package Design: More minimalism design and make it a perfect gift for your kids and friends. Note：(Applicable Age : 12+)To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.

User questions & answers

Question:	The website isn’t working how can I download the software I need
Answer:	The oils are made for candles only.
Question:	I am considering this for my son. What type of computer/laptop would work best for programming with this
Answer:	I'm terribly sorry to hear about this! Please email me at [email protected] so I can assist you further with this.
Question:	where can i download the software? It does not seem to be on their website
Answer:	The type of wax is natural soy wax.
Question:	Can you add a camera to the vehicle once completed
Answer:	I usually try to use natural soy wax or organics wax because they both help my the scent that I add to the candle stand out.

Product features

Learning while playing – a great way of cultivating interests

ELEGOO

Smart Robot Cat Kit V3.0 has multiple modes such as auto-go, infrared control, obstacle avoidance and line tracking modes. In each mode, you will learn how to load programs and command the car to run as instructed. The great interactivity that you can have with this robot car could definitely motive your curiosity and interest to find out why and how it works this way. Learning electronics is not as complicated as you might think, especially with our smart robot car kit it will become more interesting than ever. If your kids, family or friends are attracted to the electronics and robotics world this kit would be a great choice and perfect gift for them to start their first step on the electronic journey.

Redesigned interfaces to meet demands of different users

In the version of robot car kit V1.0, we used the original expansion board which has many pins available on the board and enables you to add extra sensors than what we provide in the kit as to fulfill more functions and makes it more personalized. But it will require a certain level of electronics knowledge and DIY experiences otherwise you may easily burn your sensors and boards. To avoid those potential errors from novice user we redesigned the expansion board and cables by adding XH2.54 interfaces in robot car kit V3.0, which makes wiring become very handy and easy and almost impossible to make mistakes when installing sensors. We also reserved the pins on the board so DIY lovers can customize it and have more possibilities. With that being said it really depends on your situation and background that which kit suits you more. Either way, we have a perfect solution for you.

Obstacle Avoidance

Fear of damage no more.

Under this mode the ELEGOO robot car will automatically detect obstacles ahead of it no matter which direction it is from with the ultrasonic sensors on the platform by sending waves and calculating the distance. Keep your car away from collision and enjoy the fun.

ELEGOO BLE Tool APP

A smart robot car on your phone

It wouldn’t be smart enough if you can’t control your robot car with your phone. Simply install the ELEGOO BLE Tool APP from APP Store and Google Play and team with our HC-08 module you can control your car freely. In our tutorial you will also learn how to edit and send signals to the board and make it run.

Line Tracking

Follow your runway

The line tracking modules at the bottom of the car make sure it follows the runway you design with its infrared transmitter tube and an infrared receiver tube. Make sure your runway is clear enough and long enough then you can enjoy a wonderful car racing show.

Component List:

1pcs ELEGOO UNO R3, 1pcs USB cable, 1pcs V5.0 extension board V3.0, 1pcs L298N motor driver board V3.0, 1pcs ultrasonic Sensor, 1pcs ultrasonic holder, 1pcs servo motor, 1pcs servo motor fixed plate, 1pcs line tracking module, 4pcs motor, 1pcs remote, 1pcs charger, 1pcs cell box, 2pcs 18650 battery, 1pcs tape, 8pcs separation shims, 2pcs acrylic plates, 4pcs wheel, 8 bags of screws and nuts for sensors and modules, 4pcs aluminum blocks , 10pcs copper columns, 1pcs plastic box, 1pcs CD with tutorial, Several DuPont wires, Several fix tools

Product description

The Raspberry Pi 4 Model B 4G is the low cost board of the fourth generation Raspberry Pi family. It’s a high performance based on 64-Bit quad core processor with other improvements such as dual micro HMDI ports and 2 of the four USB ports are now USB 3.0 and the new USB-C power connector which is the emerging standard for charging and transferring data. Faster Ethernet, PoE capability via a PoE HAT, dual band wireless 2.4/5GHz and Bluetooth 5.0/BLE makes this board ideal for your next IoT or SBC based project.

 

 

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 1GB of RAM, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.

 

• A BUMP UP IN EVERY SPEC OF PREVIOUS MODEL - The CPU, the GPU, the Memory speeds and even the SD card read and write speeds are much faster and the system as a whole should prove to be a lot more robust for those projects that were almost too much for the model 3B+ to tackle.
• FAST NETWORKING- This product's key features include a high-performance 64-bit quad-core processor, dual-display output via two Micro HDMI ports, up to 4K resolution, hardware video decoding at up to 4Kp60, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability.
• 7" TOUCH SCREEN DISPLAY - Full Color 800 x 480 Resolution Portable Adapter Board Connects Via GPIO or USB; 10-Finger Detection Great for Media & Gaming
• COMPLETE RASPBERRY PI 4 SET - Bundle Includes Everything You Need to Build a Mini Computer at Home; Great for Beginners, Pros, Adults & Kids, a Credit Card Sized Computer Features Super-Fast 64-Bit Quad Core CPU, Built-In Wi-Fi, Bluetooth Low Energy & 4GB RAM
• WHAT YOU GET: Complete Kit Includes: 1 x Raspberry Pi 4 Model B motherboard, 1 x 7" touchscreen and screen case, 1 x mini keyboard, 1 x 32GB micro SD card with NOOBS, 2 x 6ft HDMI cable, 1 x Power supply adapter and 4x Heatsinks

User questions & answers

Question:	Does this kit include gpio cable? if not, which cable would be recommended
Answer:	No onboard graphics with the KF
Question:	The kit did not come with instructions. How do I get instructions to put this together
Answer:	The k means the processor is unlocked, meaning that you can overclock it. The f means there are no integrated graphics with the processor, meaning that you need a graphics card. The i9 9900k and kf are exactly the same, except the kf doesn't have integrated graphics.
Question:	All the text says 4Gb but pic says 2Gb. What version is this
Answer:	Had this similar situation happen to me. But instead of a solderable chip I had received an old i3 processor "2330m" for a laptop.. i went ahead and got a refund and ordered from bestbuy.
Question:	Is this the 4gb or 2gb of ram? Picture says 2 but description says 4gb
Answer:	The “kf” has the dedicated graphics disabled. Other than that it is the same. Which is why I purchased the “kf” over the “k” because it is cheaper and I have a dedicated GPU so I would never use the intel integrated graphics.

• This is a complete learning kit based on Raspberry Pi (Compatible with RPi 4B/3B/3B+/2B/2B+)with Android App. For better learning, an elaborately-written user manual, code with explanation and thorough schematic diagrams are provided.
• The Raspberry Pi board (NOT included) is used as control. The kit uses a step-down DC-DC converter module to reduce input voltage and a motor driver module with L298N. Also a webcam is included with a USB Wi-Fi adapter so you can check the video in a real-time manner on your PC or cell phone.
• On the PC, you can control the car move forward/backward and turn left/right, as well as control the camera to turn vertically and horizontally so as to capture the image in different directions.
• A great kit for you to start studying Raspberry Pi (both code and application), learn about the basic components and modules in electronics, and then use the knowledge learnt to explore greater fields!
• Working Voltage: 7V-12V; Powered by two 18650 rechargeable lithium batteries

User questions & answers

Question:	is the raspberry pi included
Answer:	No soldering needed to connect cable to Raspberry pi or to connect cable to board But you will of course need to solder your components to the board.
Question:	What is the app called
Answer:	There is a pin for gnd and another for 3.3V , they should be connected from outside sources , for me I used MSP430 micro controller in the experiment I was working on and connected both gnd and 3.3 from there. Be careful to not increase/decrease the input voltages of the other pins beyond the limit values listed in the datasheet.
Question:	Can i use li-polymer battery instead of two li-ion 18650 batteries? i am going to buy https://www.amazon.com/gp/product/b071xsgk9r
Answer:	Sounds like wiring to me Be sure to have a ground between what you are measuring and the a/d Also make sure you are settling it to single ended mode and not differential
Question:	What is a "tf-card", which was included in the self-provided parts list
Answer:	No it will be burned if it receives more than 3.3V.

Product features

Smart Video Car Kit for Raspberry Pi with Android App

Notes:

1) The Raspberry Pi is NOT included in the package; you can use Raspberry Pi 3 model B, 2 Model B and 1 Model B+ for control

2) You should apply 3.7V 18650 batteries that contains NO protective circuit board. If you use those with the board, when an overcurrent occurs, they will automatically cut off power for protection, which would suddenly shut down the Raspberry Pi. Thus, the smart car will stop working and the Raspberry Pi may be damaged.

3) If your batteries carry the protective board originally, you can just remove it for use.

Main Features:

- Easy Assembly

You'll need to build the car from scratch. The assembly is very easy, so you can have the fun of DIY and make a video car in a short time.

- APP Control

You can remotely control the smart car on the PC or on your Android phone conveniently, to explore a fascinating world with the car!

- Real-time image transmission

With the USB camera onside, you can view the image and video taken in a web browser on your device by WiFi in real time.

- Open Source Code

The code for the car is written in Python and entirely open source. You can change the code by yourself, and push your version on GitHub to share ideas. Sharing is everything!

- Detailed user manual

An elaborately-written user manual is provided, including code explanation and thorough schematic diagrams.

Real-time image transmission

APP Control

Detailed user manual, Open Source Code, Component List

An elaborately-written user manual is provided, including code explanation and thorough schematic diagrams. Also we've published several video tutorials for operation. Therefore, you can apply the robot with both the printed book and online videos.

Product description

ELECROW Raspberry Pi 4 3b+ All in One Learning Sensor Kit -Basic Kit

• Raspberry Pi Kit: Please note that this Crowpi basic kit does not include the raspberry pi board. It fits with Raspberry Pi 4, 3b, 3b+ and more.
• Organized and Uncluttered: With the sensors, buttons and output devices all pre-assembled in one package, you can start doing raspberry pi projects instantly and easily with CrowPi, which has many advantages compared to the traditional ways of rasberry pie electronics.
• Build Quality: The solid ABS shell with iron hinges makes Crowpi portable to carry with.
• All Sorts of Projects: This Raspberry Pi Kit is jam-packed with lots of buttons, LED feedback devices such as LED Matrix and 19 different sensors in a tidy, easy to use package, which allows your kids to build many projects.
• 21 Lessons on Youtube: This learning kit ships with step by step instructions and provides 21 video lessons to take you through identifying components, reading code, and running it in the terminal.

User questions & answers

Question:	What material is used to hold the screen? Can it be modified to hold a 10 inch screen
Answer:	It is the gauge or diameter of the wire. You can find actual measurements on the net. This gauge is adequate for 5 volt, low amperage used with Pi.
Question:	Does this kit come with a camera and cable
Answer:	Hi yes it works with PRI 4 3.
Question:	Does this come with the SD card with program to run the pi installed? Also, how do we ensure we get the proper plug for the power adapter
Answer:	Yes; worked with my 3b.
Question:	The advanced kit comes with the raspberry pi 4 correct
Answer:	The other answer about the pins being separated is WRONG. The ground pins are tied together on the adapter board.

Product features

Get Coding Skills

Practice primary coding by making your own Scratch

Control the hardware with Scratch programming skills

Develop programming skills

Build Projects

You can start by using only a few components, such as the sound sensor and buzzer to build a noisy alarm system. After you’re getting skillful, you can complete a more complicated project, such as activating the LCD and LED segment displays, LED matrixes, buzzers, or vibration motors at the same time with an NFC card.

Crowpi Raspberry Pi Kit

Crowpi can be used as a computer learning kit, browse the internet, listen to music, watch videos, process words and more.

What You Get

The Crowpi basic kit does not include the raspberry pi board and some of the accessories that the advanced kit comes with. If you have already had the raspberry pi 4, Zero, Zero W, 3B, 3B+, the basic kit would be a good choice.

• PDF Tutorial - Detailed PDF tutorial of 28 lessons with sample code and image instructions.
• Perfect Kit for Beginner - The most economical way for beginners to start programming. Compatible with Arduino r3, mega, nano.
• No Need Solder - LCD1602 module with pin header (no need to be soldered by yourself).
• Upgraded starter kits - Come with power supply module, 9V battery with dc.
• Good quality storage box with divider plates- Avoid to mess up and get a tidy box.

User questions & answers

Question:	Is the kit compatible with the arduino ide
Answer:	Nope. It's just a pack of sensors.
Question:	Do I need to purchase any additional products
Answer:	My elegoo 37 sensor kit has only one ball tilt sensor. My keyestudio super learning kit has 4 ball tilt sensors so in/out of level and direction may be detected.
Question:	Can you make a phone with this
Answer:	Hi, yes. You can separate each of the conductors if you like, and use them to connect to the GPIO pins.
Question:	It's there a list of projects
Answer:	Yes, you can.

Product features

LCD1602 Display Lesson

The display has an LED backlight and it can display two rows with up to 16 characters on each row. You can also see the rectangles for each character on the display and the pixels that make up each character. This LCD display is white on blue and is intended for showing text.



We will run the Arduino example program for the LCD library and learn how to control the LCD1602 Display in this lesson. We can attach a potentiometer for controlling the contrast of the display.

Power Supply Module Lesson

The power supply module with a green/red LED to indicate the presence of power, and an ON / OFF latching switch to control the power to the board. On this particular model and version, the center pin of the barrel socket is positive.



After connecting the wiring and uploading the Arduino program, we can use the potentiometer to control the extent of LED blinking.