10 best raspberry pi kits

• 🍓【Raspberry Pi 4 Model B 4GB RAM Starter Kit】4GB RAM Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
• 🍓【Fastest Raspbery Pi 4 Model B 4GB Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
• 🍓【32GB Class 10 SanDisk Micro SD Card】Preloaded with Raspberry Pi OS (Raspbian), very easy to use for even beginners. LABISTS Raspberry Pi 4 4GB RAM Starter Kit also comes with a micro SD card reader which is compatible with USB-A & USB-C.
• 🍓【Equipped with Raspberry Pi 4 Heatsink Fan】1 mini heatsink fan and 3 premium copper heat sinks for impeccable heat dissipation, better than those only two aluminum heatsinks. Comes with install tools, a real raspberry pi 4 Model B 4GB complete Starter Kit.
• 🍓【Specially Designed Premium Raspberry Pi 4 Case】Offers your Raspberry pi good protection. Easy access to raspberry pi camera module, power, audio/video, USB, LAN, micro SD card, and HDMI connector, enough space for fan and gap to dissipate heat.

User questions & answers

Question:	I have a raspberry pi 3 with some games. Can I use it directly with this raspberry pi
Answer:	Yes, absolutely. I tried the Minecraft demo installed on the NUC6CAYS, got hooked and bought the full edition. I mapped a wireless game controller to work with it, which is so much better than the keyboard control. I set a max 40 fps, which it maintains most of the time. It's addictive fun. I upgraded ram to 8 gb, but still running from the EMMC. Migrating to the SSD should make some performance improvement.I bought this NUC to use as a 24/7 DVR. - - fantastic energy savings over the tower I had been using for that purpose. I still transcode on the tower.If I were buying one for gaming, I would go for a more powerful unit, but the NUC6CAYS is fine for Minecraft, if you aren't a hardcore gamer.
Question:	Are there more complete instructions available? Step 1 speaks to micro SD card slot but not shown on diagrams. guessed
Answer:	The fan runs off of 5V only (doesn't know about temp). Pin 2 is 5V and Pin 6 is GND. Your kit should have come with a drawing of the GPIO. Even pins are nearest the outter edge of the case.
Question:	Which way do you want the airflow to go form the fan? Blowing on the board or blowing the air out of the case
Answer:	The case is only held in place with 4 philips screws. It is easy to remove. The case’s built in fan connects to pins 0 and 12.
Question:	What's the fan size? I want to replace it with a quieter one
Answer:	Yes, i have16GB (2 x 8G) 204-Pin DDR3 SO-DIMM DDR3L 1600 (PC3L 12800) Laptop Memory Model F3-1600C11D-16GRSL installed and works great!

Product features

LABISTS Raspberry Pi 4 Model B 4GB RAM Complete Starter Kit with 32GB Micro SD Card Preloaded Raspberry Pi OS (Raspbian)

CPU up to 3 Times Faster

Raspberry Pi 4 4GB RAM with 1.5GHz quad-core ARM Cortex-A72 CPU, 3x performance boost over the previous model, delivers a 500Mhz speed for stronger processing power but using less energy.

Updated Bluetooth 5.0

Bluetooth 5.0 (4.2 on the Raspberry Pi 3 B+) means you'll get twice the speed (2 Mbit/s) and 4 times the range (50m outdoors, 10m indoors) than the previous generation. Dual-band 802.11 b/g/n/ac wireless LAN for quick wireless networking with less interference and better reception.

Dual Displays, 4K Output

Dual micro-HDMI ports support up to 4K/60fps, perfect to connect your Raspberry Pi 4 with much larger displays with crisp, sharp, high resolution. H.265 4Kp60 hardware decoding supports to watch 4K movies in your favourite media centre distro.

2 USB 3.0 & 2 USB 2.0

LABISTS Raspberry Pi 4 has two USB 3.0 ports for up to 10x faster transfer speeds than USB 2.0, perfect for connecting fast peripherals like SSDs and flash drives. 2 USB 2.0 ports for connecting less speed-dependent peripherals like keyboards and mice.

15W 5.1V/3A USB-C Power Supply

1.5M/5 Feet USB-C Power Supply with Noise Filter & On/Off Switch - Specially designed for the Raspberry Pi 4 (UL Listed); Features: 5.1V 3A, 15.3 Watts; Thick & durable, designed for low-loss power transfer.

3 Premium Copper Heat Sinks

Equipped with 3 premium copper heat sinks with better heat dissipation than aluminum ones and prevent system failure.

Complete Raspberry Pi 4 Starter Kit

What's In The Box:

• 1x Raspberry Pi 4 model B board
• 1x 32G Micro SD card
• 1x SD card reader
• 2x HDMI cables
• 1x LABISTS Raspberry Pi 4 case
• 1x 5.1V/3A power supply with switch
• 3x Heatsinks ;1x fan with 5 screws; 1x screw driver

Product description

Raspberry Pi 4B (4GB RAM) Starter Kit



Everything you need to get started with the Raspberry Pi ecosystem, just add a monitor.

The Raspberry Pi 4 upgrades and re-engineered to provide a higher processor speed, great multimedia performance, larger memory, and faster networking compared to the earlier models boards, while retaining backward compatibility and low power consumption. The Raspberry Pi 4 provides a smooth and recognizable complete desktop experience you may not imagine from a smaller and cost-effective machine.

Come with Official Beginner’s Guide 3rd Edition. Whether you want to make games, build robots, build weather stations, set up retro gaming consoles, or hack weird and wonderful projects, this book is here to help you get started.



What is in the Box

Raspberry Pi 4B(4GB RAM)

Official Raspberry Pi Beginner's Guide 3rd Edition

USB Mouse

USB Keyboard with built in USB hub

16GB Micro SD Card

15.3W Power Supply US - White

2 x Micro HDMI Cables

Pi 4B Case



Raspberry Pi 4B Specification

Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz

4GB LPDDR4-3200 SDRAM

2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE

Gigabit Ethernet

2 USB 3.0 ports; 2 USB 2.0 ports.

Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)

2 × micro-HDMI ports (up to 4kp60 supported)

2-lane MIPI DSI display port

2-lane MIPI CSI camera port

4-pole stereo audio and composite video port

H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)

OpenGL ES 3.0 graphics

Micro-SD card slot for loading operating system and data storage

5V DC via USB-C connector (minimum 3A*)

5V DC via GPIO header (minimum 3A*)

Power over Ethernet (PoE) enabled (requires separate PoE HAT)



Environmental Specifications

Temperature - Operating (°C): 0°C to +50°C

• Raspberry Pi 4B complete desktop kit includes everything you need to get started with the Raspberry Pi ecosystem - Just add a monitor
• Creadit card size latest Raspberry Pi 4 B single board computer features 1.5GHz 64-bit quad-core ARMv8 CPU (4GB RAM), faster networking, more powerful performance than the earlier models
• 16GB Micro SD memory card with download utility included. Class 10 speed quickly loads your operating system and is great for storing data, having fun with coding, web browsing, gaming and more
• Ergonomic design USB Mouse and Keyboard set for comfortable use and complete desktop experiences. The USB Keyboards features a built in USB hub adding 3 additional USB 2.0 ports to your Raspberry Pi
• High-quality protective case, 15.3W US power supply, 2 micro HDMI cable and official beginner's guide. Easily build your robot brains, smart home hub, media centre, networked AI core, factory controller, and?much more

User questions & answers

Question:	Is there a manufacture warranty on this
Answer:	I would not use this for a NUC that takes the smaller power adapter--I'm pretty sure the smaller NUCs use 12v power supplies and this is not 12v.
Question:	Can you play Minecraft on this
Answer:	No - high density DDR3L as per this post from Intel:http://www.intel.com/content/www/us/en/support/boards-and-kits/intel-nuc-kits/000023485.html
Question:	Can we buy this bundle, but with the Pi 4b 8gb model
Answer:	No. The 32gb flash chip is built on to the board of the upgraded version that includes the OS. The base version has no storage.
Question:	Would this be appropriate for an 8 year old with minimal coding experience
Answer:	Yes, you can. I just installed Win 7 Professional (Not the first time on a newer NUC, maybe 3 times so far?). For whatever reason I needed to install it from a USB 3 device. Search intel for Windows 7 USB 3.0 Creator Utility to get your ISO on that format. Boot from USB and you should be all set.

• Includes Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core CPU (4GB RAM)
• 32GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS, USB MicroSD Card Reader
• CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply (US Plug) with Noise Filter, Set of Heat Sinks, Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)
• CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

User questions & answers

Question:	What is noobs
Answer:	There's actually a bracket built onto the inside of lid (can't remember if it's the top or bottom. I think bottom) that your 2.5" drive slides into. It's a tight fit, so no need for screws. It has a short SATA cable that runs to the board and provides both power and data.
Question:	How do you attach the heat sink? This is my 1st Pi
Answer:	HX318LS10IBK2/16 is an over kill. You are not going to over clock or have heath issue. Any SODIMM DDR3 1600 or faster but make sure they support 1.35V.
Question:	This kit does not include a fan, right
Answer:	Hello, thank you for your question.Yes, it will recognize and support both at the same time. You can install and use a M.2 SSD and 2.5" device at the same time. You will just have two separate storage options if using both. Best Regards, MITXPC
Question:	My son is asking for this and he is 11. Appropriate
Answer:	Greetings,Great question!The Iris Graphics 6100 is indeed capable of some light 3D gaming. There are a few very good videos showcasing the real-world performance of the Iris 6100 on YouTube. You'll find videos referencing the two titles you've inquired about.That being said, the NUC5i7RYH is not designed as a competitive gaming machine and you should not expect extraordinary performance for modern, 3D game titles.Best regards,MITXPC

Product features

CanaKit Raspberry Pi 4 4GB Starter Kit

An exclusive Starter Kit from CanaKit that includes the 4GB RAM version of the latest generation model of the Raspberry Pi family: The Raspberry Pi 4 4GB and everything you need to get up and running within minutes in the exciting world of Raspberry Pi!

The Raspberry Pi 4 features a 64-bit quad core processor running @ 1.5 Ghz. The CanaKit Raspberry Pi 4 4GB Starter Kit includes a premium Raspberry Pi case as well as a Samsung 32 GB EVO+ Class 10 MicroSD pre-loaded with NOOBS. Just Plug & Play!

What's in the box?

• Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core CPU (4GB RAM)
• 32GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS
• CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount
• CanaKit Low Noise Bearing System Fan
• Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter - Specially designed for the Raspberry Pi 4 (UL Listed)
• CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)
• Set of Heat Sinks
• USB MicroSD Card Reader
• CanaKit Quick-Start Guide and CanaKit GPIO Reference Card

CanaKit Black Case

Premium quality ABS 3-piece plastic case specially designed for the Raspberry Pi 4 with GPIO access.

CanaKit Low Noise Fan

CanaKit Exclusive Low Noise Bearing System Fan

CanaKit PiSwitch

Convenient On/Off Power Switch with LED indicator for the Raspberry Pi.

Samsung 32 GB EVO+

High performance EVO+ Class 10 MicroSD card pre-loaded with NOOBS.

CanaKit 3.5A USB-C Power Supply

CanaKit 3.5A USB-C power supply (UL Listed) is specially designed and tested for the Raspberry Pi 4. This power supply incorporates a noise filter to provide the highest stability.

CanaKit Micro HDMI Cable

CanaKit Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)

USB MicroSD Card Reader

Set of Heat Sinks

• 【STEAM ROBOTICS CAR KIT】PiCar-X is a perfect AI self-driving Raspberry Pi car for adults and teens to learn Raspberry Pi programming, supports Visual Programming Web Control for Raspberry Pi 4B 3B+ 3B 2B, electronic assembling and robotic knowledge to build your own remote control car. 👉[Note: Raspberry Pi/TF card/battery not included, u need to purchase that separately.]
• 【VARIOUS MODULES & MULTIPLE FUNCTIONS】The mounted Robot HAT, camera module, ultrasonic module and line tracking module can realize the functions of Real-time image/video transmission, face detection, color detection, automatic line tracking, sound effects, background music, text to speech, automatic obstacle avoidance, etc.
• 【METAL STRUCTURE & EASY INSTALLATION】This is the first car in the PiCar series with an aluminum alloy structure. Each part has been carefully designed, and the installation is very simple. Hard body and powerful functions make it to complete greater challenges.
• 【FRIENDLY SOFTWARE AND CONTROL INTERFACE DESIGN】The UI design of our programming software - Ezblock Studio is very friendly, you can quickly start learning programming. At the same time, you can remotely control PiCar-X by Ezblock. In addition, we have developed a web control page for your operation, applicable to your smart phone, tablet, desktop and so on. You can get to use PiCar-X as soon as you run a few commands. 👉[Note: Ezblock cannot be used on PC]

User questions & answers

Question:	Which PI versions are support
Answer:	Yes. They can run without problem on the pi 4.
Question:	Doe it come with an automatic docking station when batteries low
Answer:	There is an SD card slot on the shorter side of the case. Please insert the SD card into the slot after assembling the kit.
Question:	Does this come assembled
Answer:	It depends if you're putting it on a case with the fan mounted on tbe bottom or top. It you want to minimize the amount of dust in the case. I put mine pulling air out on the top. This will pull air over the chips and the heat away. If you pull the air out of the case, the new air will come in (mostly) through the hole or slots in the bottom of the case (minimizing dust) and will more evenly cool the entire board.
Question:	Does this kit include a Raspberry Pi
Answer:	Mine is/was 30x30x7mm Mine worked well but failed after a few days. Labists (great service, btw) partially refunded so I could replace it. I ordered these but see they're out of stock now--worked fine so far (two weeks): /gp/product/B0792BW2VH/ NOTE You're probably aware, but remember that the leads are separate and not in a single connector limiting the fan's wires to two adjacent pins. Most PC fans rely on that setup, but your Raspberry Pi doesn't.

Product features

Introduction

• SunFounder PiCar-X is an AI self-driving robot car for Raspberry Pi, on which RPi works as the control center. Supports Visual Programming Web Control for Raspberry Pi 4B 3B+ 3B 2B. The mounted camera module, ultrasonic module, line tracking module can separately realize the functions of color detection, face detection, automatic obstacle avoidance, automatic line tracking, etc.
• Taking the SunFounder-designed Robot HAT for Raspberry Pi as the driving module, it integrates the motor driving, servo driving and presets ADC, PWM, Digital pins for your function extension. A speaker has already been inserted in the Robot HAT to realize TTS (Text-to-Speech), sound effect, background music, etc.
• If you are interested in autonomous driving with camera, you should own a our PiCar-X!

Build your own remote control car

Built with a robust finished aluminium body and include Robot HAT board based on raspberry pi development,Picar-X is easily to be controlled and assembled.It come with Multiple Playing Modes.

Real-time Video Transmission

• The mounted camera is capable of 2592*1944 pixel static images and supports 1080p30,720p60,480p60/90 video.
• With a 180°wide angle,it can capture wider visual scenes.
• Also,this advanced designed white car, four wheels with powerful motors, shows strong flexibility on back and forth.It can be realized 360° turning.

Line Tracking & Cliff Detection

The 3 channel grayscale module prevents the car from falling off the cliff when it moves freely,aslo for implementing walking along the line.

AI Detectation(Color/Face Recognition)

PiCar-X can separately realize the functions of color detection, face detection.Note: Only one color can be detected for one time(Support red orange yello green blue purple)

Python & Blockly visual programming

PiCar-X guides you to grasp the blockly Python program skill.It comes with free Ezblock Studio APP compatible with IOS, Android, Phone and Tablet.Learn the block-based coding skills while developing critical thinking skills.

PERFECT FOR BEGINNER TO LEARN ADVANCED CODERS (14 examples given to expand your knowledge)

Music Mode

A speaker has already been inserted in the Robot HAT to realize TTS (Text-to-Speech), sound effect, background music that brings you a good mood, etc. You can develop a funny interaction with this function.Such as, Programmable texted message "hello" to play when it sees your friends.There's a camera and music mode gives the car a sense of science and technology.

Obstacle Avoidance

PiCar-X has ultrasonic Sensor that can be used for experiments such as obstacle avoidance and automatic follow. Distance value can be read with your devices.

Product description

IMPORTANT NOTE: Raspberry Pi 4 compatible operating system is required for operation.





IMPORTANT NOTE: Micro HDMI cable required for operation.





An exclusive kit from CanaKit that includes the fastest model of the Raspberry Pi family - the Raspberry Pi 4!



The Raspberry Pi 4 offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation boards, while retaining backwards compatibility and similar power consumption. The Raspberry Pi 4 provides desktop performance comparable to entry-level x86 PC systems.



Due to the higher power requirements, the Raspberry Pi 4 requires at least 3.0A USB-C power supply. The CanaKit 3.5A USB-C power supply (UL Listed) that is included in this kit is specially designed and tested for the Raspberry Pi 4. This power supply incorporates a noise filter to provide the highest stability.



In addition to the CanaKit USB-C power supply, this kit includes a set of 3 Aluminum Heat Sinks to keep the Raspberry Pi 4 cool as well as the Cana Kit Quick Start Guide.





Kit Includes:



- Raspberry Pi 4 Model B with 1.5GHz 64-bit quad-core CPU

- 2GB RAM

- CanaKit USB-C Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 4 (5-foot cable)

- CanaKit USB-C PiSwitch (On/Off Power Switch)

- Set of 3 Aluminum Heat Sinks for the Raspberry Pi 4

• Includes Raspberry Pi 4 Model B with 1.5GHz 64-bit quad-core CPU (2GB RAM)
• CanaKit 3.5A USB-C Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 4 (5-foot cable)
• CanaKit USB-C PiSwitch (On/Off Power Switch)
• Set of 3 Aluminum Heat Sinks for the Raspberry Pi 4

User questions & answers

Question:	Ok i’m totally new to all this tech stuff. i’m branching out learning something new. do i need to by python for coding or is it on here or at least ea
Answer:	Dear customer, It has 1-year warranty. Best Regards, Micro Center
Question:	Is an SD card included in this kit
Answer:	It comes with an SD card preloaded with Raspbian (and Minecraft Pi). Minecraft Pi is not the same as Minecraft for PC or a game console... it has the same game mechanics and you can explore/build stuff but is limited in features (but you can dive into the code and modify in ways not easily achieved on other platforms). You’ll want to ensure Minecraft Pi is what you want to play or if you want the full experience only available in the PC version before purchasing but the Raspberry Pi can do so much more than just Minecraft Pi and is a great tool for getting into programming so definitely worth owning one.
Question:	Is the raspberry pi itself all prebuilt? Would i just need to pop it into the case
Answer:	Dear customer, We only has 4GB model in this bundle currently. Thanks for your understanding. Best Regards, Micro Center
Question:	Are the ones you are shipping now the revised version 1.2 boards with the fixed usb-c port
Answer:	I would say this is a great kit for an 8 year old to get started with coding projects. The guide that comes with it explains the hardware of the Pi board in very understandable language for any age and a couple of basic coding projects to practice with for those with no experience. As an added bonus the Raspberry Pi organization runs a website loaded with free classes, projects and resources for children to develop tech skills that is a perfect compliment to this kit.

• Includes Made in UK Raspberry Pi 3 B+ (B Plus) with 1.4 GHz 64-bit Quad-Core Processor, 1 GB RAM
• Dual Band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac Wireless LAN, Enhanced Ethernet Performance
• 32 GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS, USB MicroSD Card Reader
• CanaKit 2.5A USB Power Supply with Micro USB Cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ (UL Listed)
• Premium Raspberry Pi 3 B+ Case, High Quality HDMI Cable, 2 x Heat Sinks, GPIO Quick Reference Card, CanaKit Full Color Quick-Start Guide

User questions & answers

Question:	Could I hook a touch screen up to this and install Android on it with torque pro and google maps working
Answer:	NOOBS stands for New Out Of the Box Softwear. It is a piece of softwear put together by the people who design and build the Debian (Named for Debbie and Ian, hence Debian) software which is designed Especially for the Raspberry Pi. You will find it is the best choice and fit for the Machine itself. With the Canakit you get EVERYTHING you need to get started. By following their excellent instructions, you will soon be up and running. I believe they have just about thought of everything. Correct power supply, Power on/off switch, adapter for both power and Mini HDMI connectors and a fan powered case. With the NOOBS on the Micro SD HD card you can choose the OS you prefer from about 5-6 choices. I recommend Raspbian Buster, and the Elec one that supplies the Kodi installation of the OS. The HD card you are supplied is big enough to hold both systems. That way, you can dual boot to either one and live like a king. Enjoy the Raspberry Pi 4 You have one of the best single board computers ever built. Should give you years of "building" or "Makers" fun.
Question:	Where do the heat sinks go? The kit never covers it- just says not install them before putting the Pi in the case
Answer:	The heat sinks aren’t officially a requirement but since they are in the kit it makes perfect sense to put the on especially if you plan to run your pi with passive cooling. Mine also came with the fan.
Question:	Can you install windows
Answer:	A small fan is included, but it is not really required unless you are going to run the board hard with 24/7 computing projects. For distributed computing projects where the CPU is run at 100%, the fan will hold temps down by about 10 deg C with the heatsinks.
Question:	Is this compatable with an iPhone
Answer:	If he is into programming then yes, this is perfect for him and completely age appropriate. We got our son his first raspberry pi when he was 10 and he blows us away with his knowledge! It’s a great way to grow his curiosity and programming skills.

Product features

CanaKit Raspberry Pi 3 B+ Starter Kit

An exclusive Starter Kit from CanaKit that includes the fastest model of the Raspberry Pi family: The Raspberry Pi 3 Model B+ (B plus) and everything you need to get up and running within minutes in the exciting world of Raspberry Pi! The Raspberry Pi 3 Model B+ features a 64-bit quad core processor running @ 1.4 Ghz.

The CanaKit Raspberry Pi 3 B+ Starter Kit includes a premium Raspberry Pi case as well as a Samsung 32 GB EVO+ Class 10 MicroSD pre-loaded with NOOBS. Just Plug & Play!

What's in the box?

• Raspberry Pi 3 Model B+ (B Plus) with 1.4GHz 64-bit quad-core ARMv8 CPU (BCM2837B0) with 1 GB LPDDR2 SDRAM
• On-board WiFi and Bluetooth Connectivity
• 32 GB Samsung EVO+ Micro SD Card (Class 10) pre-loaded with NOOBS
• USB MicroSD Card Reader
• CanaKit PiSwitch (On/Off Power Switch for Raspberry Pi)
• CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 3 B+ (5-foot cable)
• Premium Raspberry Pi 3 B+ Case
• High Quality HDMI Cable with CEC support (6-foot cable)
• Set of 2 Aluminum Heat Sinks
• CanaKit Full Color Quick-Start Guide and GPIO Quick Reference Card

CanaKit Black Case

Premium quality ABS 3-piece plastic case specially designed for the Raspberry Pi 3 B+ with GPIO access.

CanaKit PiSwitch

Convenient On/Off Power Switch with LED indicator for the Raspberry Pi.

CanaKit 2.5A Power Supply

CanaKit 2.5A Micro USB power supply (UL Listed) is specially designed and tested for the Raspberry Pi 3 B+. This power supply incorporates a noise filter to provide the highest stability.

Samsung 32 GB EVO+

High performance EVO+ Class 10 MicroSD card pre-loaded with NOOBS.

Product description

Kit Includes



- Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM)

- 128GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS

- CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount

- CanaKit Low Noise Bearing System Fan

- Set of 2 Micro HDMI to HDMI Cables - 6 foot (Supports up to 4K 60p)

- CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter - Specially designed for the Raspberry Pi 4 (UL Listed)

- CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

- Set of Heat Sinks

- USB MicroSD Card Reader

- CanaKit Quick-Start Guide

- CanaKit GPIO Reference Card

• Includes Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM)
• 128GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS, USB MicroSD Card Reader
• CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter, Set of Heat Sinks, Set of 2 Micro HDMI to HDMI Cables - 6 foot (Supports up to 4K 60p)
• CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

User questions & answers

Question:	Does this model come with an M2 socket installed
Answer:	There is no m.2 slot on the raspberry pi. This set does not come with anything to install a M.2 on the raspberry pi.
Question:	Does this kit come with thermal paste for the heat sinks or does it even need paste
Answer:	It comes with sticky kinda thermal tape on the bottom off heat sinks
Question:	Is this actually the 8gb ram model? I bought this exact one and it came as the 4gb version
Answer:	The raspberry pi comes in two four and eight GB models. You either accidentally bought the wrong one or the vendor accidentally - or possibly deliberately depending on vendor - sent you the wrong one. Review your Amazon order and if you should have received the eight gigabyte model talk to Amazon customer support.
Question:	Does this have a network port
Answer:	Yes, it has a physical ethernet RJ45 port and it also has Wifi built in too.

Product description

Kit Includes



- Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM)

- CanaKit Premium Clear Raspberry Pi 4 Case

- CanaKit Fan

- Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)

- CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter - Specially designed for the Raspberry Pi 4 (UL Listed)

- CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

- Set of Heat Sinks

- CanaKit Quick-Start Guide

- CanaKit GPIO Reference Card

• Includes Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM)
• CanaKit Premium Clear Raspberry Pi 4 Case, CanaKit Fan, Set of Heat Sinks
• Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter - Specially designed for the Raspberry Pi 4 (UL Listed)
• CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

User questions & answers

Question:	Do i need a power suppy converter from 240 v to 110 v if i take this to europe ? or i just need to buy the power plug converter
Answer:	It supports Raspberry Pi 4B 3B+ 3B , thanks.
Question:	years old boy likes coding. Has laptop and school Chromebook. Is this still good Christmas gift or not really needed
Answer:	No it doesn’t. The required batteries are Li-Ion 3.7 V 18650 rechargeable batteries The batteries require a charging device to charge the batteries with. There’s some for sale here, just do a search
Question:	Does this have a rtc (real time clock
Answer:	It comes with all parts, you need to assemble it and make it fun. :)
Question:	Is this particular 4GB kit shipping with the v1.2 board revision c03112 yet? (per the output of `cat /proc/cpuinfo`
Answer:	No You have to buy the raspberry pi separately

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fjgTR



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

  ...

(Download tutorial for details)

  ...

Chapter 26 WebIOPi & IOT

 Project 26.1 Remote LED

Chapter 27 Solder Circuit Board

 Project 27.1 Solder a Buzzer

 Project 27.2 Solder a Flowing Water Light

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 18 Infrared Motion Sensor

 Project 18.1 Sense LED

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 434-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 223 items for 57 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	are there any tutorials for how to connect everything?? Not looking for coding tutorials yet
Answer:	Dear customer, Thank you for your question. You can download tutorial first via link below: https://github.com/Freenove/Freenove_Ultimate_Starter_Kit_for_Raspberry_Pi/archive/master.zip If you have any concerns, please feel free to contact us via Freenove support email. Best Regards, Freenove Support Team
Question:	Issues with the i2c module:the instructions you give in the tutorial are outdated and not applicable to the rpi3 and python3 - any suggestions
Answer:	Dear customer, We have update our tutorial(i2c configure) and code(Python) for customers. Now all Python code can run on Python 2 and Python 3. Please download again. Thanks for your question. Kind Regards, Freenove
Question:	Does it work with raspberry pi
Answer:	Dear customer, Yes, we have tested all projects in our tutorial . This kit works well with Raspberry Pi 4. And if you have any concerns, we offer technical support. Sincerely, Freenove Support Team
Question:	Are three 74HC595's used in one project? I broke one since the pins were ripped by me pulling it out of the breadboard too hard
Answer:	Dear customer, Thank you for choosing Freenove. I am sorry for the inconvenience. No, there is no project using three this chips. There just is a project using two this chips. If you broke more chips, you can contact us at [email protected] We will send you a new one for free. So don't worry. Sincerely, Freenove Support Team

• Includes Pi Zero W -Featuring :802.11 b/g/n wireless LAN-Bluetooth 4.1-Bluetooth Low Energy (BLE)
• 2.5A Power Supply Designed for Raspberry Pi-HDMI-Mini HDMI Adapter-Micro USB OTG
• Premium Black Case with 3 Covers-1 Closed Cover-1 with GPIO Access Cover-1 with Camera Mount Cover
• 40 Pin Header---Heatsink for Raspberry PI Zero--Camera Module Adapter
• All Parts Covered Under the Vilros 1 Year Warranty

User questions & answers

Question:	Where does the heat sink go? Is it just stuck to the top of the processor or does it go somewhere else on the board
Answer:	Python is included in the Raspian operating system along with the Thonny IDE that you'll use as your workspace to do your coding. The SD micro card you'll use to plug into the pi will have all that stuff on it and will set everything up for you the first time you boot it up. Watch those UTube videos and tutorials, they're priceless!
Question:	What game systems can this emulate smoothly
Answer:	No.
Question:	Is there a light that lights up when it gets power
Answer:	No case is included but yes you will need to pop it in a case or just put it on a non-conductive surface. The computer itself is complete other than the SDcard which will need have an image on it and put into the slot.
Question:	What is the minimum and maximum SD card this little guy can take
Answer:	I don't know the answer to the question you're asking but I want to expand on what you're asking. The original revision of the board has issues on the USB-C port had issues not working with LOTS of chargers as it was out of spec and caused thing's to be be identified as an audio device.