14 best operating system for raspberry pi zero w

• Includes Pi Zero W -Featuring :802.11 b/g/n wireless LAN-Bluetooth 4.1-Bluetooth Low Energy (BLE)
• 2.5A Power Supply Designed for Raspberry Pi-HDMI-Mini HDMI Adapter-Micro USB OTG
• Premium Black Case with 3 Covers-1 Closed Cover-1 with GPIO Access Cover-1 with Camera Mount Cover
• 40 Pin Header---Heatsink for Raspberry PI Zero--Camera Module Adapter
• All Parts Covered Under the Vilros 1 Year Warranty

User questions & answers

Question:	Where does the heat sink go? Is it just stuck to the top of the processor or does it go somewhere else on the board
Answer:	Python is included in the Raspian operating system along with the Thonny IDE that you'll use as your workspace to do your coding. The SD micro card you'll use to plug into the pi will have all that stuff on it and will set everything up for you the first time you boot it up. Watch those UTube videos and tutorials, they're priceless!
Question:	What game systems can this emulate smoothly
Answer:	No.
Question:	Is there a light that lights up when it gets power
Answer:	No case is included but yes you will need to pop it in a case or just put it on a non-conductive surface. The computer itself is complete other than the SDcard which will need have an image on it and put into the slot.
Question:	What is the minimum and maximum SD card this little guy can take
Answer:	I don't know the answer to the question you're asking but I want to expand on what you're asking. The original revision of the board has issues on the USB-C port had issues not working with LOTS of chargers as it was out of spec and caused thing's to be be identified as an audio device.

Product description

This is a 3rd Gen! A Form Fitting USB Hub for Raspberry Pi Zero

Raspberry Pi Zero only comes with a single micro USB (OTG) port, forcing you to use a traditional USB HUB if you want to connect multiple USB peripherals to it.  The whole set is bulky and inconvenient to carry around.

The Stackable USB Hub for Raspberry Pi Zero is the perfect way to expand the connectivity of the Raspberry Pi Zero and add keyboards, mice, WiFi dongles, Ethernet adapters and other USB devices.  No wires and no soldering work needed.  Simply mount the Stackable USB Hub under the Pi Zero using the bundled spacers, screws, bolts, and the Pi Zero will get 4 new USB 2.0 ports!.  The Stackable USB Hub has been carefully designed with custom-made parts, so Pi Zero fits and stacks nicely on top on it.  It also has built-in a 2-way back-powering circuit to protect against power being plugged into the Pi Zero and the Stackable USB Hub simultaneously.

USB peripherals can be power hungry.  Grab an optional 5V 2.4A micro USB wall charger with 1.5M micro USB cable with power switch to ensure enough juice to power your projects.  You can also use our Pi Zero protectors with the Stackable USB Hub.

Compatible with the latest Pi Zero v1.3 and Pi Zero W!! 

• Modified spring loaded pogo pin locations to support the latest Pi Zero v1.3 (the one with the camera port) and Pi Zero W.

• Pogo pins and the four supporting poles have been elongated to further increase the headroom between the Pi Zero board and the USB hub board, hence, longer header pins are allowed for the Pi Zero header. 

• This stackable USB hub design is NOT compatible with the older Pi Zero v1.2 (the one without the camera port).  If you are looking for the hub version compatible with Pi Zero v1.2, check out the 2nd Gen Stackable USB Hub.

  • 4-Port USB 2.0 Plug-and-Play Hub. Compatible with USB 1.1 and 2.0 devices
  • USB 2.0 High Speed, transfer rate up to 480Mbps. Gold-plated and low-resistance spring-loaded pogo pins
  • Bus-powered from Pi Zero, or powered externally via the Hub's micro-USB port. Support maximum 2.3A current if powered by external USB charger
  • Over current protection and LED indication if power rail draws more than 2.3A. 2-way back-power protection circuitry on Pi Zero connection path
  • Raspberry Pi Zero shown in the photos is for illustrative purpose only and is not included in this offer.

User questions & answers

Question:	Are any extra pins or pin headers necessary to use this
Answer:	Yes, the ELITE CAPELLIX AIOs are the newest ones we've released. If you have any more questions or concerns, please feel free to contact support via our website.
Question:	How big are the spacers? i need a ferrite ring for pi zero w. but can't for the love of all find the dimensions of the spacers
Answer:	Height : 160mm (d15s) versus 110mm (d9l): about 2 inches shorter (protruding out from the motherboard): https://noctua.at/en/nh-d9l/specification
Question:	does this come with the ferrite rings
Answer:	Most likely you will need access to the backside/bottom of the motherboard to mount the backside bracket. My chassis has an access panel so that I did not have to remove the motherboard. Check to see if you can remove the panel the faces the backside of motherboard.
Question:	Could this be modified to connect to a Raspberry Pi
Answer:	It means it will be compatible but you will need the preinstalled backplate which comes with the motherboard. Still, its a good idea for you to check your specific motherboard as there are some that have compatibility issues. Here is the link https://noctua.at/en/nh-d9l/comp

Product description

Ethernet / USB HUB HAT for Raspberry Pi, 1x RJ45 Ethernet Port, 3x USB Ports

Overview



This Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.

It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.



Features

• 3x USB ports, compatible with USB2.0/1.1
• 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
• Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port


What's on Board



1.Raspberry Pi GPIO interface: for connecting Raspberry Pi

2.USB extended ports: USB1~USB3

3.RJ45 port :10/100M Ethernet interface

4.USB HUB interface (bottom): for connecting the HUB to the Raspberry Pi USB port
• Raspberry Pi Zero / Zero W / Zero WH: connected via Micro USB connector
• Raspberry Pi B+ / 2B / 3B / 3B+ /4B: connected via Micro USB cable
5.TS8121A: Ethernet wave filter

6.RTL8152B:10/100M Ethernet chip

7.FE1.1S:USB HUB chip

8.LED indicators:


• PWR: power indicator
• ACT: Ethernet indicator
• D1~D3: dedicated indicator for USB1~USB3 respectively
Specifications


• Operating voltage: 5V
• Dimension: 65mm × 30mm
• Mounting hole size: 3.0mm
Package Content

1.ETH/USB HUB HAT x1

2.Micro USB connector x1

3.Micro USB cable x1

4.RPi screws pack (2pcs) x1



Development Resources



Wiki : www.waveshare.com/wiki/ETH/USB_HUB_HAT

More questions, please send message to get it.


• This Raspberry Pi Hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.(Ethernet / USB HUB HAT for Raspberry Pi, 1x RJ45 Ethernet Port, 3x USB Ports)
• It can work with various versions of the Pi( Raspberry Pi B+ / 2B / 3B / 3B+ /4B/ Zero / Zero W / Zero WH),and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
• 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip.;3x USB ports, compatible with USB2.0/1.1;
• Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
• Operating voltage: 5V. Dimension: 65mm × 30mm. Mounting hole size: 3.0mm.

User questions & answers

Question:	What gpio will be accessible after installation on a pi zero wh, i want ability to be able to connect up sensors in leds if i want to off my gpio pin
Answer:	Hi Jaron, The pump itself would be the light controller, you'd connect the fans to it and then the pump to the internal USB 2.0 header on your motherboard for iCue control. If you have any other questions please reach out: support.corsair.com
Question:	Are there any cases that will work with this
Answer:	Based on the coldplate design and the mounting method it uses, it is CoolIt product. It is a successor to the Platinum line that was only previously offered with 240mm and 280mm versions.

Product description

This 1080p Webcam Camera is a custom designed easy plug and play for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This bus travels along the ribbon cable that attaches the camera board to the Pi. The sensor itself has a native resolution of 5 megapixel. Still picture resolution: 2592 x 1944, also supports 1080p30, 720p60 and 640x480p60/90 video. The camera is supported in the latest version of Caspian, Raspberry Pi's preferred operating system. Compatible with Raspberry Pi model B / B + / A + / 4/3/2/1, Pi zero. Features ♥ Automatically switches day and night mode for better and clearer image during the day and night. ♥ CSI Interface for higher bandwidth link which carries pixel data from the camera back to the processor. Specifications： CCD size: 1/4 inch Aperture(F): 1. 8 Focal Length: 3. 6 mm (adjustable) Field of View: 72 degrees Preferred Sensor Resolution: 1080p Dimension: 1. 42inch x1. 04inch x0. 94inch 4 screw holes which are used for a fixed position Support 3. 3V power output Supports connecting infrared LED or flash LED Package Content: 1 x 5MP Camera Module Board 1 X 15cm FFC cable 1 X 15cm Pi Ribbon Cable

• ♥All-day image - it's built-in ir-cut camera, automatically switches day and night mode for better and clearer image. This can avoid image color cast, which is easier for beginners to use.
• ♥Support all PRI model - This Raspberry Pi camera Compatible with Raspberry Pi 4/3/2/1 model B/ B +/ a + Pi zero & w.
• ♥Csi interface - This Pi camera module uses the dedicated CSI interface, via the CSI bus, A higher bandwidth Link which carries 5 megapixels data from the camera back to the processor.
• ♥1080P HD Webcam - the IR video Camera is capable of 2592 x 1944 pixel static images, and also supports 1080 P @ 30 FPS, 720 P @ 60 FPS and 640 x480 P 60/90 video Recording, with 5MP Ov5647 1080P webcam sensor.
• ♥Strong customer service team - as long as you have any questions about the product, we will solve your problem immediately when we receive your email.

User questions & answers

Question:	Any suggestions on a mount/case for this camera? Even links to a 3d printable case
Answer:	The 50.00 dollar one is little bit bigger and better made.
Question:	It says adjustable lens. Does that mean you can change focal length from fisheye to zoom
Answer:	Arduino Uno R3
Question:	Will this work with Raspberry Pi zero
Answer:	I got the USB Drive and all of the module's were on my usb drive, plus it had a web site to go to. I have since moved to a new location, and I can not find my drive to give you the web address.
Question:	will the ribbon cable can be changed to a longer length
Answer:	it does not use that much it uses nearly MIN:1.5w Max:5 watts

Product features

Support All RPI Even 4

Compatible With Raspberry Pi camera module compatible with Raspberry Pi 4 B model B / B + / A + / 3/2/1/zero/zero w.

Day and night mode

It's built-in IR-CUT camera, automatically switches day and night mode for better and clearer image during the day and night. This can avoid image color cast, which is easier for beginners to use.

CSI Interface

This interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor.

Package Content

1 X 5MP Camera Module Board with cap

2 X IR Lights

1 X 15cm FFC cable

1 X 15cm Pi Ribbon Cable

4 X Screws

Product description

The Raspberry Pi Camera V2 features the same tiny footprint (25mm x 23mm x 9mm) as the original Pi Camera module but features an upgraded Sony IMX219 image sensor which has a native resolution of 8 megapixels The fixed-focus lens can capture 3280 x 2464 pixel images and 1080p30 720p60 and 640x480p90 video The Raspberry Pi Camera V2 connects to the CSi connector of your Raspberry Pi via a 15cm long flexible ribbon cable It is plug-and-play compatible latest version of the Raspbian operating system making it perfect for time-lapse photography recording video motion detection and security applications

• Second Generation Raspberry Pi Camera Module with Fixed Focus Lens
• Sony Exmor IMX219 Sensor Capable of 4K30 1080P60 720P180 8MP Still
• 3280 (H) x 2464 (V) Active Pixel Count
• Maximum of 1080P30 and 8MP Stills in Raspberry Pi Board
• 2A Power Supply Highly Recommended

User questions & answers

Question:	So which is it? 1080p30 or 1080p60 for video
Answer:	GitHub
Question:	how effective would this camera (with a pi) be as a serveillance camera, esp for outdoor use
Answer:	no
Question:	What is the field of view (FoV) on this camera
Answer:	No it doesn't
Question:	How long is the cable
Answer:	The back of the box has a QR code and link to beginner.seeed.cc. The page there has all the instructions you should need to load the Arduino IDE on your PC and build all the projects.

Product description

*** THIS SD CARD IS PREPARED, TESTED, AND CONFIGURED USING OUR OWN PROPRIETARY SYSTEM AT STEADYGAMER™ ***



The STEADYGAMER SD card comes with the RASPBIAN / RASPBERRY PI OS installed. Raspbian / RASPBERRY PI OS is a fully fledged desktop experience made specifically for your Raspberry Pi.



This card will get your Pi up and running without any fuss, there is no need to connect your Pi to a PC and figure out how to make your Pi work correctly. Simply plug the sd card into the Raspberry Pi Board and turn it on and you are ready to start using your Pi.



**NO ROMS OR EMULATORS COME INSTALLED IN THIS SD



Includes:

1 x Genuine 32GB Class 10 Micro SD Card Preloaded w/ (RASPBIAN / RASPBERRY PI OS)

1 x SD Card Plastic Case



**THIS CARD WILL NOT WORK IF YOU TRY USING ON ANOTHER RASPBERRY PI AFTER USING IT ON ONE PI, IT WILL ONLY WORK ON THE FIRST PI YOU USED THE CARD WITH SINCE IT IS NOW FORMATTED TO WORK ON THAT PI ONLY. DO NOT ATTEMPT TO USE ON ANOTHER PI AS IT WILL NOT WORK**

• Genuine 32GB Class 10 Micro SD Card Preloaded w/ (RASPBIAN / RASPBERRY PI OS)
• Works with all Raspberry Pi Models (Including 4, 3B+ and 3A+)
• Preloaded with RASPBIAN / RASPBERRY PI OS and ready to go!
• Fully fledged desktop experience right on your Pi

User questions & answers

Question:	Ok, i just put the sd card in and nothing happens. Now what
Answer:	Not when I have ordered it
Question:	Is this the official raspberrypi foundation microsd card
Answer:	Probably better to use Waveshare USB HUB HAT USB to UART Converter Onboard 4 Port USB HUB HAT Designed for Raspberry Pi Zero/A+/B/ B+/2 B/3 Model B https://www.amazon.com/Waveshare-USB-HUB-HAT-Converter/dp/B06Y2TSR1D/ref=sr_1_39?s=electronics&ie=UTF8&qid=1515634664&sr=1-39&keywords=waveshare+usb
Question:	HOw would you install firefox i tried to do it threw the terminal but didnt take does this use ubuntu or openSuse
Answer:	Could you please show us your order id,we will find your order then send you the URL link
Question:	Does this have Galaga on it? That’s the game I really want
Answer:	The Arduino Library Manager should have everything you need to get started with the Adafruit GFX Library and SSD1306. The libraries themselves can be found on Github. https://www.arduino.cc/en/guide/libraries https://github.com/adafruit/Adafruit-GFX-Library

Product description

Features

Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption

Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location

A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity

Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing

Supports U-Center, an easy way to config the module

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano

Onboard USB TO UART converter CP2102 for serial debugging

Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32

Baudrate range: 4800~921600bps (9600bps by default)

Supports DDC (I2C compliant) interface: up to 400KHz (max)

Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts

4x LEDs for indicating the module operating status

Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Applications



Ideal for fleet management, asset tracking, security systems, industrial PDA, GIS app, etc.



Resources



https://www.waveshare.com/wiki/MAX-M8Q_GNSS_HAT



Package Content



MAX-M8Q GNSS HAT x1

GPS External Antenna (B) x1

USB-A to Micro-B cable x1

RPi screws pack (2pcs) x1

2x20PIN female header x1

• This is a Raspberry Pi GNSS HAT based on MAX-M8Q with multi-constellation receiver support, which means up to 3 types of GNSS satellite systems can be used together, including GPS, Beidou, Galileo, and GLONASS. It also support augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming, and so on.
• Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location. A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing.
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
• Supports U-Center, an easy way to config the module. Supports DDC (I2C compliant) interface: up to 400KHz (max)
• Onboard USB TO UART converter CP2102 for serial debugging. Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32. Baudrate range: 4800~921600bps (9600bps by default). Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts.

User questions & answers

Question:	Is there any RPI4 enclosure that fits this module
Answer:	The spacers/mounting pins are about 9mm, when fully assembled (with the laser cut base and top) it totals to 33mm.

Product description

Official Raspberry Pi Infrared Camera Module V2, Supports Night Vision



Featurest

Official Raspberry Pi Camera, supports Raspberry Pi and Jetson Nano

Sony IMX219 8-megapixel sensor

Camera specifications

• CCD size : 1/4inch
• Aperture (F) : 2.0
• Focal Length : 3.04mm
• Angle of View (diagonal) : 62.2 degree

3280 × 2464 still picture resolution

Support 1080p30, 720p60 and 640x480p90 video record

No infrared filter, supports night vision

Dimension: 25mm × 24mm × 9mm

Note: Infrared LED is required to provide Infrared lighting for night vision.



Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero Camera Cable



User manual



https://www.waveshare.com/wiki/RPi_NoIR_Camera_V2



Package Content

RPi NoIR Camera V2 x1

15-pin FFC (opposite sides contact) x1

Blue gel filter x1

Note:The included FFC is 15cm, if you need a longer cable, please consider: RPi Camera Cable 60cm

• Official Raspberry Pi NoIR Camera Module V2,Support Infrared Night Vision,Support all revisions of the Raspberry Pi and Jetson Nano.
• IMX219 8-megapixel sensor,3280 × 2464 still picture resolution.
• Support 1080p30, 720p60 and 640x480p90 video record
• All software is supported within the latest version of Raspbian Operating System
• Applications: Infrared photography, low light photography, monitoring plant growth, CCTV security camera,etc.

Product description

Why choose Aokin Camera Module Board for Raspberry Pi?



➤The module attaches to Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.

➤The board itself is tiny, at around 25mm x 20mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important.

➤The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard.

➤In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video recording.

➤IR-CUT Camera -- It's built-in IR-CUT camera,automatically switch day and night mode for better and clearer image during the day and night.



Specification:



➤Viewing angle: 72 degrees

➤Material: CCL

➤Sensor type : Omni Vision OV5647 5MP

➤Still Picture Resolution: 2592 x 1944

➤Video: Supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 Recording

➤15-pin MIPI Camera Serial Interface - Plugs Directly into the Raspberry Pi Board



Application:



➤Cellular phones,PDAs,Toys

➤Other battery-powered products

➤Can be used in all Raspberry Pi platforms



Package List:



1 x Camera Module (with cable for Rpi Model 2/3 B/B+)

Note: Not included 1 x 15cm camera cable for RPI Zero/Zero W，Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

• 📷Camera module for Raspberry Pi, Fully compatible with Raspberry Pi A, B, B+, 2, 3, 3B+,Zero,Zero W. The camera is supported in the latest version of Raspbian,the Raspberry Pi's preferred operating system.
• 📷High-Definition video camera, The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video recording.
• 📷The module attaches to Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.
• 📷Automatic IR-CUT Camera -- It's built-in IR-CUT camera,automatically switch day and night mode for better and clearer image during the day and night.
• 📷The camera module board itself is tiny, making it perfect for mobile or other applications where size and weight are important. Raspberry pi camera is really good for learning program, monitor real-time experiment and video recording for pi enthusiast and beginner. Also suitable for UNO Board.

User questions & answers

Question:	Does this come with a cable? If so how long is it
Answer:	I use the two meter cable without issues.
Question:	Does this camera truly have automatic switching of the ir-cut filter inside the camera based on light conditions? not manually controlled via a script
Answer:	Have not used mine yet. From visual appearance all GPO pens are accessible after the hat is installed uses a jumper to extend USB ports probably draws power through the jumper good luck with your project
Question:	What is absolute minimum focus distance? If screw/unscrew lens to max
Answer:	Hello,i am afraid that there is not case work with this.
Question:	Does the camera come with a flex cable that fits the *smaller* csi connection port on a raspberry pi zero
Answer:	No, everything is included in the box!The pogo-pins are soldered onto the HAT.

Product description

Specification:

Raspberry Pi I2S Input (LRCK - GPIO19, BCK - GPIO18, DATA - GPIO21, GND)

Output Ports: 1 x 3.5mm phone jack, 2 x RCA connectors

Analog audio output level: 2.0VRMS

Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)

IR receiver: GPIO17, 38KHz

Operating System:

Moode Audio Player, OSMC, Openelec, Raspbian Jessie, Volumio, Pi Core Player, RuneAudio

Support: Volumio, RuneAudio, OSMC, XMBC(Kodi), MOODE etc.

Full-HD audio: up to 24-bit/192kHz playback

Built in audiophile TI Burr Brown DAC (TI PCM5122)

Class leading audio: 112db SNR, and -93db THD

Integrated hardware volume control

TI's LP5907 Ultralow-Noise voltage regulator for optimal audio performance

Built in IR receiver :Vishay TSOP34838)

Available with RCA and 3.5mm phone jack output connectors

Powered by Raspberry Pi, no external power requirements

Conforms to the Raspberry Pi hardware-attached-on-top (HAT) specification

Access to GPIO pins on HAT

 

Packing List:

1 x Expansion Board

• With DAC All-function PCM5122 chip and I2S Input, X920 DAC+ board is a perfect HiFi / DAC+ / HIFI / Full-HD audio expansion board for Raspberry Pi 3 Model B/ 2B / B+;
• After using X920 board, User can coordinate with the broadcast system (such as Volumio, RuneAudio, OSMC, XMBC(Kodi), MOODE etc.) to set up your own HIFI player network.
• X920 is available with RCA, 3.5mm phone jack output connectors and built in IR receiver (Vishay TSOP34838);
• Full-HD audio – up to 24-bit/192kHz playback and Class leading audio (112db SNR, and -93db THD) function, Integrated hardware volume control with TI's LP5907 Ultralow-Noise voltage regulator for optimal audio performance.
• Powered by Raspberry Pi, no external power requirements, Conforms to the Raspberry Pi hardware-attached-on-top (HAT) specification.

Product description

Ultra Storage With the development of smart phones, your phone is often used for much more than just making calls or sending the odd text. It now functions almost as a handheld computer, being capable of capturing images, videos, and providing access to music files and downloaded apps and games. SanDisk Mobile Ultra microSDHC memory cards provide an easy to use, high performance storage solution for all your data files so you don't need to worry about running out of internal memory. Ultra Speed Class 10 performance rating ensures that the data stored on your card can be recorded, played back and transferred quickly and easily, granting you full access to all your images, videos and other files with little delay! Ultra Compatibility Compatible not just with mobile phones, but with any device with a microSDXC slot, this card can be used with an array of different modern devices including MP3 players and tablet PCs as a shared file storage and transfer medium. Perfect for transferring your favorite images, music or video onto your PC without having to hunt around for that pesky connection cable! Ultra Reliability Backed by a lifetime limited guarantee, you can have confidence in the quality of your card and its ability to withstand some of life's toughest conditions to continue to provide you with a long-lasting, reliable memory storage solution throughout its own lifetime and that of your microSDHC compatible device. Please check compatibility with your device or its manufacturer. Your device needs to be SDXC Compliant for this card to work.

• Sandisk Ultra for Raspberry Pi 3 Model B, Pi 2, Zero Motherboards (Retail, not preloaded)
• Save, Backup, Archive while Easily Sharing your content collections with friends, family.
• SanDisk's removable storage solution is specifically designed for secure expansion slots.
• Comes with Everything But Stromboli Micro SD Reader for easy transfer to USB ports.

• Host OTG cable to 3 USB & LAN adapter -- Adds additional 3-Port OTG USB extension; Adds 10/100 Mbps wired internet connectivity
• Driver-less design for Windows 8.1 / 10 (32/64 bit) or up, Mac OS 10.9 or up, and Android 6.0 or up operation system, Chrome OS
• Compatible for Raspberry Pi 2, Amazon Fire TV Stick, notebook, Tablets, and computer with one available micro-b port
• Built-in DC power port, supports 5V power adapter, a power cable included; It only powers USB 2.0 HUB and NOT the host; It charges the added USB device
• It has limited Android compatibility. Android users, before you buy, be sure to look if the device has a (grayed out) "Ethernet" menu in Settings under WIRELESS & NETWORKS. Most probably it will just work then

User questions & answers

Question:	will this work with the Motorola Xoom tablet
Answer:	The cable I got with this unit was (barely) 6 inches long. So -- FYI.You can buy 2 meter cables on amazon: https://www.amazon.com/gp/product/B00XW2NCKS
Question:	Will this also charge my device when the adapter is plugged in
Answer:	No but would be interested if one is available
Question:	Can it draw the power from the Ethernet wall jack to charge the device to which connected such as Galaxy note 2 or
Answer:	Adjustable is for focus
Question:	does the ethernet work with Raspberry Pi Zero
Answer:	Yes

Product features

5V DC-in Cable

The built-in a DC-in jack for getting external power support

It works with 5V USB power adapter

Connect the power cable is an optional step. The LAN adapter will work without supporting external power

To ensure the LAN adapter working correctly, we have to connect the Ethernet first before we plug in the external power cable

Wired Internet Connection

Works with the device that has included an Ethernet (wired internet) capability in their version of the Operating System. As far as we know, it works with Windows Tablet Netbooks, Notebooks, Ultra Books, Raspberry Pi Zero, Google Nexus Player, Nexus 7 1st Gen, Nexus 7 2nd gen; Stick computers such as MK802, MK808 and UG802, and Tablets with an Ethernet menu

This adapter will not Enable a tablet that is not configured to work with Ethernet.

Micro-USB Host OTG Cable

It works with all devices that support OTG function

Micro-USB cable length: 10-inch / 25 centimeters

2 OTG HUB

OTG HUB supports USB keyboard, WiFi, Bluetooth, USB flash drive, etc. USB extension and peripheral

Each OTG USB support 5V1A output

OTG USB support 480 Mbps data transfer speed

Note: orange USB is only for power output

Ethernet Specifications:

Support all USB standard commands

Support TCP/IP, NetBEUI, IPX/SPX transfer protocol

Half/Full-duplex 10/100Mbps operation

Support Wake-on-Lan (WoL) and RealWoW

Switch 10/100Mbps network automatically

Support IEEE 802.3/802.3U/802.3x/802.1/802.1Q/802.3az-2010 protocol

Compliant to USB1.0/1.1/2.0/3.0

Extremely low power consumption

Independent MAC network address

Product description

IMPORTANT NOTE: If you see a rainbow splash screen with a lightning bolt symbol, this indicates you are NOT using B+ compatible software. NOOBS 2.7.0 or later is required for operation of the B+.



An exclusive kit from CanaKit that includes the fastest model of the Raspberry Pi family - the Raspberry Pi 3 Model B+ (B Plus)!



The Raspberry Pi 3 Model B+ is the latest production Raspberry Pi 3 featuring a 64-bit quad core processor running at 1.4 Ghz. It incorporates built-in WiFi and Bluetooth connectivity with enhanced dual-band 2.4 GHz and 5 GHz WiFi, Bluetooth 4.2/BLE and faster Ethernet.



To take full advantage of the improved power management on the Raspberry Pi 3 B+ and provide even support for even more powerful devices on the USB ports, a 2.5A adapter is recommended.



The power supply included in this kit incorporates a noise filter to provide the highest stability and comes with a 5-foot cable. This power supply can power the Raspberry Pi 3 B+ and other USB accessories (such as most portable hard drives) without requiring an external powered USB hub.



The kit also includes a premium quality case specially designed for the Raspberry Pi 3 B+.



Kit Includes:

Raspberry Pi 3 Model B+ (B Plus) with 1.4GHz 64-bit quad-core ARMv8 CPU (BCM2837B0) 1 GB LPDDR2 SDRAM

CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 3 B+ (5-foot cable)

Set of 2 Aluminum Heat Sinks

Premium Clear Case

CanaKit Quick-Start Guide

• Includes Raspberry Pi 3 B+ (B plus) with 1.4 GHz 64-bit Quad-Core Processor and 1 GB RAM
• CanaKit 2.5A USB Power Supply with Micro USB Cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ (UL Listed)
• Dual band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Enhanced Ethernet Capability
• Premium Clear Case, Set of 2 Aluminum Heat Sinks
• CanaKit Quick-Start Guide

User questions & answers

Question:	Does the power cable have a switch
Answer:	Yes, this is one of the distinguishing features of this kit. It has a cable that connects between the power supply and the Pi. The on/off switch toggles and a small red LED lights to show that power is on.
Question:	Does the "premium clear case" for pi 3 model b+ in canakit "b07bc7bmhy" contain slots for the camera ribbon cable
Answer:	Yes, there are two rectangular holes, one for GPIO cable next to the connector on the pi and one smaller on the short side opposite to USB and Ethernet connection. I think it can be used for display or camera
Question:	Title says rpi 3b+ but description says that it's rpi 2 . which one is it
Answer:	I just got mine. It’s indeed 3B+. It’s revision is a020d3.
Question:	How is the heatsink applied
Answer:	Adhesive on the back of each heat sink. Apply one to each designated spot.