12 best lcd display for raspberries

• Video-Audio Joy: 480 x 320 display resolution (HDMI input resolution supports 480*320 to 1920*1280 any resolution); 3.5mm audio/headphone jack makes the display no longer silent.
• Perfect for Raspberry Pi 4: Micro HDMI adapter included, hassle-free connection to Raspberry Pi 4; Also compatible with all other Model A&B series.
• More Features: Supports HDMI audio split; Refreshes up to 60 frames per second; The backlight can be turned on/off
• Plug & Play: Don’t need to reboot the Pi when connected and it doesn’t require any external power supply.
• Portable Touchscreen: the overall dimension of this tiny screen is 3.38”×2.20” (86mm×56mm), and the included stylus, heatsinks, and HDMI adapters make this kit completed and convenient to use.

User questions & answers

Question:	can i hook up like a playstation to this if i would like using the HDMI port
Answer:	If you have the equipment to properly convert a PS1 to output to HDMI (emphasis on properly) then it should work fine. I've even hooked up a standard PC to this screen without issue. *Note you will need to have a microusb power adapter if you're running it not connected to the Pi
Question:	Could I mount this inside a case as a dedicated screen for displaying component data
Answer:	Dear sir, About your issue, we have asked our supporters. Our product is a monitor that can be displayed as long as there is HDMI video signal. So you can try it. If you have other issues, please feel free to let us know and we will try our best to solve it. Best Regards, Linda from Arducam Support Team
Question:	does it exist
Answer:	yes.
Question:	If I dont want the touchscreen ability, can I remove the gpio connectors without effecting the display
Answer:	Dear Sir, Yes, this works with a generic hdmi display if you don't want the touchscreen ability. You just need to power the display and connect the hdmi interface. Remove the gpio connectors will not effect the display. Best regards, Arducam Team

Product features

Package Including

• 1 * 3.5 Inch HDMI resistive touch screen
• 1 * Stylus
• 1 * HDMI to HDMI converter
• 1 * Micro HDMI to HDMI adapter
• 3 * Heat sinks for Raspberry Pi board

Note

• The Raspberry Pi board is not included.
• The resolutions higher than 480*320 will be compressed to 480*320 and the screen display ratio might be changed accordingly.
• The 3pcs heat sinks are used for the Raspberry Pi board instead of the touchscreen.

Product description

Kit contents: 7” Touchscreen display adapter board dsi ribbon cable 4 x stand-offs and screws 4 x jumper wires technical Specifications 7” Touchscreen display. Screen Dimensions: 194mm x 110mm x 20mm (including standoffs) viewable screen size: 155mm x 86mm Screen resolution 800 x 480 pixels 10 finger capacitive touch Connects to the Raspberry Pi board Using a ribbon cable connected to the dsi port. Adapter board is used to power the display and convert the parallel signals from the display to the serial (dsi) port on the Raspberry Pi. Latest version of Raspbian OS required to operate correctly. Note: The display works with all existing Raspberry Pi models, however the mounting holes only Line up with the newer board design of the a+, b+ and Pi 2.

• This 7" Touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way.
• The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.
• Only two connections from the Pi TO the Display are necessary; power from GPIO (or USB) connection to the DSI port. The adapter board handles power, Signal conversion, and touch input conversion.
• Kit contents: 7" Touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires

User questions & answers

Question:	Does it work with retropie plug and play
Answer:	It works plug and play on anything Rasbian based...this is the official screen put out by the RPI foundation. Since "Note RetroPie is built on top of Raspbian (a linux based OS for the Raspberry Pi)", it's "plug and play"...
Question:	Https://www.amazon.com/dp/b08l6kchgs what's the difference between those two touchscreen displays
Answer:	Obviously, it got a protective case with the touchscreen display.
Question:	Will this work with raspberry pie 3 cases? canakit black case
Answer:	The CanaKit case does not have the appropriate holes for the cables to go through. These cases are best: White: http://www.amazon.com/dp/B01GEOTJMABlack: http://www.amazon.com/dp/B01GEOLNNSClear: http://www.amazon.com/dp/B01HFMZS48
Question:	Im wondering if there any Raspberry Pi touch screen display comes with a case
Answer:	This item? No. The touchscreen comes with the items shown in the product description and picture. It has a wide range of applications that may or may not need a display case. Those using this for a small Arcade Cabinet wouldn't need a case included. There are display cases available on Amazon. Might I recommend the SmartiPi Touch 2 case. It has a stand that can be adjusted to an angle you like and also houses the Raspberry Pi in one case. I have the previous version and it worked well for a miniature desktop and retro gaming device. It also has screw holes in the base should you want to secure it to a table or even a wall. https://www.amazon.com/SmartiPi-Touch-Official-Raspberry-Touchscreen/dp/B07WXK38YM/ref=sr_1_3?dchild=1&keywords=raspberry+pi+touchscreen+case&qid=1608814174&sr=8-3

• Raspberry Pi 4 Inch IPS full-angle display, 800 x 480 physical resolution support HDMI input, refresh rate up to 60fps.
• Support HDMI audio output, data entry (computer, DVD), HDMI audio input, stereo 3.5mm audio output
• Compatible with Raspberry pi 4 b board. Display ONLY Support System: Raspbian, Kali-linux, Ubuntu, Octopi;
• Touchfunction Support System: Only support Kali, Raspbian, Ubuntu, Octopie. The 4 inch display monitor with touch control function (need to install touch drive), we offer pre-install driver system image file. could be used as standard HDMI output device for computer display(no touch function)
• 100% Garantee - Miuzei provide 100% WARRANTY service; Provide LIFETIME technical support at any time.

User questions & answers

Question:	Can you tell me the dimensions of the case and the size of the screws
Answer:	Case is 119.5mm * 78.5mm * 32mm. 6.3mm & 9.5mm screws
Question:	Can it be used for 3rd generation Raspberry Pi
Answer:	Yes, but you need to buy a signal adapter for pi 3
Question:	Can I install drivers alone on my RasPi4b build without a complete new image - if so where is link
Answer:	So far, for my RPi4 running Ubuntu 20.04 server, I have not been able to get a good response from them on installing drivers. I also would prefer to install drivers on my own (drivers for non-DE, console only) but I've yet to get it working.
Question:	Touchscreen not working, is there a reason why
Answer:	You need to install the touchscreen driver from here: http://www.lcdwiki.com/4inch_HDMI_Display-C Scroll down to "How to use Raspbian/Ubuntu Mate/Kali/Retropie system"

Product features

IPS 178° Viewing

Miuzei 4 inch touchscreen has horizontal and vertical 178° full viewing angles. It delivers incredible brightness for a great viewing experience under all angles.

Portable Monitor

Tiny size, easy to carry with you. It will be a good companion for your work trip. With vivid image, responsive touchscreen, and plug n play wiring, it is definitely your best choice.

Plug-n-Play Ports

Miuzei portable monitors have a microUSB port for power and touch, and a backlight button to adjust brightness. In addition, there is an audio port to provide visual enjoyment anytime, anywhere.

Package Included:

1x 4-inch touch screen

1x HDMI to HDMI converter

1x Raspberry Pi 4 case

1x silent cooling fan

1x stylus

4 x radiators

1x screwdriver

NOTE: Before installation, remove the protective film from the case.

You will get lifetime technical support from Miuziepro.

IF YOU HAVE ANY QUESTIONS, PLEASE FEEL FREE TO CONTACT Miuzeipro.

• 7 inch LCD display USB capacitive touch control, no driver needed, plug and play. The resolution up to 1024x600.
• Supports backlight control, the back light can be turned off to save power.
• Compatible with the latest Raspberry Pi 4B, BB Black, Banana Pi and other mainstream mini PC.Compatible with the latest Raspberry Pi 4B, BB Black, Banana Pi and other mainstream mini PC.
• Can be used as a general-purpose HDMI display, device output just need to adjust to 1024x600.
• Package includes: 7 Inch Capacitive HDMI Display x1, HDMI cable x1, USB Cable x1, DVDx1, Copper screws pack (4pcs) x1
• Works perfectly for Raspberry Pi 3 2 Model B B+ win 7/8/10 systems.

User questions & answers

Question:	What are the actual screen dimensions
Answer:	6.1inch*4.3in*0.47in
Question:	What is the actual dimensions of the total unit
Answer:	package size: 8.27in*5.7in*2in the unit size： 6.5in*4.33in*0.38in
Question:	Is the hdmi port a standard hdmi or mini hdmi
Answer:	It is a standard hdmi. Thanks
Question:	Will this work out of the box with noobs or do you have to install additional drivers to support
Answer:	No, the display did not work directly out of the box. You are provided a DVD with software including zipped images for Raspian, Ubuntu and IoT. Additionally, SD formatter and Win32DisKimager and instructions. What is not included is the decompression software required to unzip the images (.7z format). Download 7-Zip if you do not already have it. Briefly, I formatted a 16G SD Card, Unzipped the provided Raspian Image and used the Win32DiskImager to load onto the SD card. Connected the Display, HDMI and Power. Inserted the SD Card and applied power. Raspian Pi booted immediately to the screen with full functionality.

Product features

Compatible Devices & OS

• Supports Raspberry Pi, BB Black, Banana Pi and other mainstream mini PC.
• Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kali-Linux, Kodi, win10 IOT, single-touch, free drive.

When worked with PC

• Supports PC with HDMI port.
• Used as a small second monitor for laptop which has Win7, Win8, Win10 system, 5 point touch (XP and older version system: single-point touch), free drive.

When worked with other devices

• Used as general-purpose mini HDMI monitor, touch function NOT available.

Hareware Description

HDMI interface: For connecting motherboard and LCD monitor to HDMI transmission.

Touch interface: For power supply and touch output, 2 same ports designed to prevent insufficient power supply when needs extra power.

Backlight switch: Controls the backlight turned on and off to save power.

Connected to RPI 4

Please connect to HDMI 0 port when worked with Raspberry Pi 4.

* If no signal detected, please add external power supply to the screen when turn it on. Then unplug the external power supply and just power the screen by the usb port of the pi if you want to get the touch function available.

Package List

7 Inch capacitive HDMI display x1

HDMI cable x1

USB cable x1

Micro HDMI to HDMI adapter x1

Copper screws pack (4pcs) x1

DVDx1

• 5 inch HDMI display with 800*480 mini LCD screen, high resolution picture, large viewing angle, fast response time, full color display. It supports manual backlight control, backlight switch can be turn off to lower power consumption.
• It is resistive touchscreen monitor which comes with a touch pen for easy use. When work with Raspberry Pi 4 3B+ 3B 2B+, directly plugged, I/Os for touch function and power supply, HDMI interface for displaying.
• This mini hdmi monitor can also work with standard HDMI device such as PC monitor, please adjust output resolution to 800*480 and use 5V2A power supply to power it. The touch function is NOT available in this case.
• Package included: 5 inch HDMI monitor x1, CD x1, touch pen x1, dual HDMI adapter x1, copper pillars (4pcs) x1.
• All the screens are tested before delivery, if there is any problem in the process of installing the driver and downloading program, please feel free to contact us by email.

User questions & answers

Question:	Does it work with the raspberry pi 3 model b
Answer:	The short answer is no. The display is SPI but an I2c module is attached and connected through header pins which you would have to remove drive via SPI.
Question:	it works like a monitor
Answer:	I found mine to be 0x27
Question:	can i power it with a usb battery pack? basically, i want to connect it to my DSLR as an ext monitor
Answer:	I measured about 44-45 mA with a DMM in the display Vcc line. However, it is a digital load that may fluctuate faster than the DMM can read it. It doesn't seem very power hungry. A set of 8 old 2200 mAh niMH batteries runs this display, an Arduino UNO, a DS3231 RTC, and a PMS5003 AQI sensor for a long time. I don't know how long, but more than I need at one time! In a few weeks of use, I have found absolutely nothing to dislike about this display, and much to like, especially how well it works! Just be sure to use the PCF8574.h library. I tried other libraries with frustrating results.
Question:	Will this display hdmi input without any raspi/usb connection? can i use this as a simple hdmi monitor without touch
Answer:	This device will work with Arduino but it has an I2C interface so you don't use the LiquidCrystal library. You have to use something like the LiquidCrystal_PCF8574 library. There are several other libraries that support LCD displays with I2C interfaces but the one I have used is the above and it works fine.

Product features

How to Install Driver to Get Touchscreen Work?

Online installation (Raspberry Pi need to be connected to the Internet)

1)Log onto the Raspberry Pi by Putty SSH (User: pi; Password: raspberry)

2)Download the driver from github then execute the following command

chmod -R 755 LCD-show

cd LCD-show/

sudo ./LCD5-show

3) Wait for a moment after executing, then you can use the corresponding Raspberry LCD.

Display Issues?

When you test the item and find the screen appear to be blank white, white line, black screen, no touch function and flashing etc?

Please modify the config.txt to adjust the output resolution. Details refer to user manual.

Hareware Description

1.Micro USB: get 5V power (not need when connect by GPIO)

2.HDMI interface: HDMI transmission

3.Backlight switch: turn on/off the backlight (save power)

4.GPIO (13*2): get 5V power& touch function

5.Extended interface

Package List

5 Inch Touch Display x1

Dual HDMI Connector x1

Micro HDMI to HDMI Connector x1

Copper Pillars (4pcs) x1

Touch Pen x1

CD x 1

Free Gift

A micro HDMI to HDMI adapter will be sent as a free gift.

It's easy to connect the Raspberry Pi 4 with it.

Product description

Introduction

7IP-CAPLCD is an universal HDMI display, an IPS screen with 1024x600 resolution.It has a capacitive touch panel, supports up to 5-points touch. Supports Raspberry Pi, Jetson nano Developer Kit, can be used as a monitor of desktop PC.

Advantage

1.Connect to PC

The display supports Windows 7/8/8.1/10 when working with Windows PC, supports 5-points and it is driver free.

【Notices】

If the screen doesn't display after connecting, please check if you connect all the cables properly, replug them and test it again. Sometimes you may need to restart PC if the PC doesn't support hot-plug.

The touch panel can only control the main display if multiple screens are connected to PC at the same time. In this case, we recommend you to set the 7IP CAPLCD as the main display.

The display may flicker because of the low voltage problem of USB port, if you face such a problem, you can connect external 5V power adapter to display.

2.Connect to Raspberry Pi

The display supports Raspbian/Ubuntu/Kali/Retropie and WIN 10 IoT. Only single-point touch is supported in most of OS, multiple touches may be supported in some software, max 5-points.

Raspberry Pi doesn't support hot-plug and auto-recognized the resolution, you need to configure the resolution manually, otherwise, the display cannot work normally.

3.Connect to Jetson Nano Developer Kit

The display will be auto-recognized by Jetson Nano Developer Kit, it is plug and play.

Package Content

7IP-CAPLCD

HDMI cable x1

HDMI to Micro HDMI Adapter x1

USB type A plug to micro B plug cable x1

Trangle bracket x 1  

Development Resources

http://www.ingcool.com/wiki/7IP-CAPLCD?Amazon

• 1024x600 hardware resolution 7'' IPS screen,Support software resolution (up to 1920×1080)
• Supports mini PC like Raspberry Pi, Jetson Nano Developer Kit
• When working with Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, driver free.When working with desktop PC, supports Windows 10 / 8.1 / 8 / 7, 5-points touch, driver free
• 3.5mm earphone jack supports HDMI audio
• OSD menu for parameters adjustable like brightness, contrast, volume, and so on.

User questions & answers

Question:	Will this work on the pi zero
Answer:	Yes , 7IP-CAPLCD will work on the Raspberry Pi Zero , but you need to prepare additional mini HDMI adapter and USB cable .
Question:	Are there holes that you could use to wall mount? Doesn't need to be a vesa mount just some stand offs pre-installed
Answer:	There are m2.5 (same as RBPi standard) threaded standoffs on the back to mount it, but you will need access to behind whatever you're mounting it to. Not VESA compatible.
Question:	Does this have a speaker header
Answer:	Yess, this LCD havs a speaker header.
Question:	What are the dimensions of the screen? I see the dimensions of the package instead
Answer:	Hello , the width is about 164.84 mm,the height is 97.14 mm .And there are different components,so the thickness is different in different parts.

Product description

Introduction

LCD2004 display is a dot matrix module designed to display 20 characters including letter, number, and symbol, supporting 4-bit and 8-bit data transmission mode. It’s quite convenient for beginners to call the built-in library Liquid Crystal of for Arduino IDE, no need to edit yourself.

Working voltage: 5V; Contrast adjustable with a 50K potentiometer onside. To use the 3.3V backlight, just connect pin A to 3.3V, pin K to GND.

Note: Solder the pin headers on it before using.

Pins’ Function

VSS: Connected to ground

VDD: Connected to a +5V power supply

VO: To adjust the contrast

RS: A register select pin that controls where in the LCD’s memory you are writing data to. You can select either the data register, which holds what goes on the screen, or an instruction register, which is where the LCD’s controller looks for instructions on what to do next.

R/W: A Read/Write pin to select between reading and writing mode

E: An enabling pin that, when low-level energy is supplied, causes the LDC module to execute relevant instructions.

D0-D7: To read and write data

A and K: Pins that control the LCD backlight

For more details, please click: http://wiki.sunfounder.cc/index.php?title=LCD2004_Module



Package Included

1 x LCD2004(The Pin Not Included)

• Display 20 characters including letter, number and symbol in 4 lines on a large screen
• Working voltage: 5V; Contrast adjustable with a 50K potentiometer onside
• Bright backlight, displaying characters clearly
• Module dimensions: 97 x 59 x 12 mm; Viewing area size: 71 x 21 mm
• Compatible with Arduino and other micro-controllers

User questions & answers

Question:	Can i use this with an stm32f4 type microcontroller
Answer:	As long as there is an I2C interface port on the STM32F4, there should be no issues.
Question:	Do these come with an I2C backpack? I just ordered some of these and they came with no backpack in the package
Answer:	There are several product options on the page, some have I2C, some don't. If you chose one that has I2C, it should come with an I2C backpack.
Question:	Has anyone run this display on 3.3 volts successfully? I'd like to use it on an 8266-12E to display the ip address
Answer:	It works on 3.3V, but just barely: it's unusably dim. I changed the supply voltage to 5V and was able to successfully drive it with 3.3V-level I2C signals, although the PCF8574 data sheet says that the minimum Vih level is 0.7 * Vcc = 3.5V. My scope says that the signals are rising to about 3.8V, so there must be some kind of pull-up to 5V on the I2C backpack board. I don't want to rely on that, so for my final design I'll use a PCA9306 I2C level shifter.
Question:	It it possible to change the address of the lcd to have multiple lcd on the same bus
Answer:	To further expand on Wes' answer (which is excellent!), you can have up to eight (8) on the same bus, per the chip datasheets. The chips have a portion of the address hard-code (which cannot be changed) and the three remaining address lines (A0, A1, and A2) can be jumpered to ground to set seven (7) other addresses - the 8th being no jumpers. IF you happen to get one with an 8574 chip and another with 8574A or 8574T, then you could potentially have up to 16 modules on the same bus as the A and T versions use a different hard-coded address than the 8574.

• 5 inch resistive touch screen designed for Raspberry Pi 3 2 model B RPI 1 b + a +
• The LCD display is available for all standard HDMI devices while the touch function is only for Caspian and Ubuntu systems
• The full color display outputs up to 800 x 480 and features a resistive touch sensing capable of detecting 10 fingers
• When the 5 inch monitor works with RI it doesn't need any external power supply The power is supplied and can be touched by GPIO display by HDMI If it is powered by external power there will be no touch function and please use 5V2A power supply to power it
• Please contact us via email longrunerus@hotmail to get detailed instructions or check Q&A below to download it
• 60 hertz
• 60 hertz

User questions & answers

Question:	How long it take in shipment
Answer:	About 3-5 days which shipped by Amazon.
Question:	Could you send me tutorial of this screen
Answer:	Hi this is the tutorial you may need. http://www.lcdwiki.com/5inch_HDMI_Display Any question please let us [email protected]
Question:	Are there any tutorials for all projects
Answer:	Hi yes, here is the tutorial link for you: https://mega.nz/#F!wYpnWYYY!73M37szyG-afxP0dhAfVLQ Any question please feel free to contact us, we are always happy to help you out. Thank you!
Question:	Do you have any case to match this raspberry pi screen
Answer:	Hello,please click the link to order the case holder:https://www.amazon.com/dp/B07Q69P6FN,if you need more help,please feel free to contact [email protected]

Product features

Tips for driver

After install the driver that could get the touch function work.

1.)Step1, Install Raspbian official mirror a)Download Raspbian official mirror（latest version）: (Check or send QA) b)Use“SDFormatter.exe”to Format your TF Card c)Use“Win32DiskImager.exe” Burning mirror to TF Card

2.) Step2, Clone my repo onto your pi sudo rm -rf LCD-show git clone ( check or send QA) chmod -R 755 LCD-show cd LCD-show/

3.)Step3, According to your LCD's type, excute: In case of 5" LCD sudo ./LCD5-show If you need to switch back to the traditional HDMI display sudo ./LCD-hdmi Wait a few minutes,the system will restart automatically, enjoy with your LCD

Note: This method will be available only when your Rapspian connects with WIFI.

If you do not have Wifi when you use it, you need to add drivers by yourself, for tutorials or you can use the tutorials in CD directly, or (Check or send QA)

For Raspberry Pi

5 inch resistive touch screen designed for Raspberry Pi 3 2 Model B RPi 1 B B+ A A+.

Work for RPI 4: Need an adapter

800*480 Resolution

The full color display outputs up to 800 x 480 and features a resistive touch sensing capable of detecting 10 fingers.

For Standard HDMI Devices

Available for all standard HDMI devices,while the touch function is only for Raspbian and Ubuntu systems.

Package include

1 * 5 inch RPi Touch Screen

1 * CD

1 * Touch pen

1 * HDMI adapter

4 * Nut

4 * Copper Column

Product description

800x480, 4inch Resistive Touch Screen LCD, HDMI interface, IPS Screen, Designed for Raspberry Pi

Features

• 4 inch 800x480 high hardware resolution Touch Screen , a good solution for those seeking for a small size with bigger resolution display 
• Resistive touch control, with a touch pen , easy to use 
• IPS technology, high quality and perfect displaying from very wide viewing angle
• Not only can be used with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable), but also works as a computer HDMI monitor.When working as a computer monitor ,touch panel is unavailable and HDMI cable is required.
• Drivers provided to work with Raspbian/Ubuntu/Kali/Retropie 
• Backlight can be turned off to lower power consumption

Package Content

• 4inch HDMI LCD x 1
• HDMI connector x 1
• Touch pen x 1
• RPi screws pack (4pcs) x 1
• Quick start sheet x1

Note

The touch of the LCD can be driven in two ways: 

Method 1: Install driver manually;

Method 2: Using ready-to-use Image

The images, drivers , user manual and software are provided , please contact us via Amazon message to get .

FAQ

1.It seems not to work as a computer monitor for a Windows PC, right?

This LCD is used for portrait display. You can set the orientation on Windows: desktop right click --> display settings --> orientation: portrait

2.What are the power requirements?

When working with 5V input, the current is about 200mA with back light on and 30mA with back light off.

• 800x480 high hardware resolution, 4 inch touch screen, IPS display, high quality and perfect displaying from very wide viewing angle.Backlight can be turned off to lower power consumption.
• Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
• Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie),Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
• HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
• Technical Support is provided, please contact us if you have any problem .

User questions & answers

Question:	I want to use it as a secondary screen on my pc. will this shut down when hdmi has "no signal" or will it show constant blue screen with "no signal
Answer:	Depends on how you power the display. I have it as a hardware monitor inside the case. I have it power via a usb cable that goes from a motherboard header that terminates into a micro usb connector. The motherboard header doesn't supply power if the pc is off so no blue screen. The usb ports on the rear I/O always have power so there would be a no signal screen
Question:	What are the actual dimensions of the viewing surface
Answer:	Length is 4in height is 2 1/4 inches
Question:	my pc case has a spot to mount a 2.5" SSD
Answer:	If your looking for a quick and easy mount, then NO, the screw holes won't match, so you would have to rig something up (drill holes, or make a mounting board). PLUS, the screen would be roughly twice the thickness (depth) of a standard 2.5" drive. Not sure what you are trying to achieve, since a drive would mount laying down in the case (most of the time) and obstruct your view.
Question:	If i use this as an external monitor for a macbook pro, do i need to install a driver
Answer:	I didn't have to install any driver to get it to work. It's basically plug and play.

Product description

touch screenLongruner Raspberry Pi Touch Screen with Holder, 7 Inch TFT LCD Display HDMI Module 1024x600 for Raspberry Pi 3 2 Model B and RPI 1 B+ A BB Black PC Various Systems （with Protective Case）Specification: LCD Size : 7. 0inch (Diagonal)Driver Element : A-Si TFT active matrixDisplay mode : Normally White , TransmissiveHigh Resolution: 1024x600SSD1963 touch panel controllerDot pitch : 0. 0642(W) X 0. 1790(H)mmActive Area : 154. 08(w)X 85. 92(H)Module Size : 164. 9(w)X100. 0(H)x5. 7(D)mmSurface Treatment : Anti-glareColor arrangement : RGB-StripeInterface: DigitalBlacklight : Highlighted LED lamp backlightingTFT Power(pin Name: 3. 3V): The power of the screen is 2. 8-3. 3V; not use 5V, all the Pin's voltage on the moduleCan not be more than 3. 3V. Backlight power supply (pin Name: 5V): backlight power range is 4. 5-7V. Interface Type: 16 parallelOperating Temperature : -20 ~ +70 degrees centigradeStorage Temperature : -30 ~ +80 degrees centigrade

• ♥ higher resolution + ♥ This Raspberry Pi screen resolution is 1024x600, upgraded from the old version in 800*480. The picture will be much more delicate and clear.
• ♥ image flip function ♥ Longruner 7 inch touch screen also has vertical and Horizontal image flip function. Image 4: 3/ 16: 9 display format conversion.
• ♥ MULTIFUNCTIONAL ♥ when the 7 inch touch screen work with the Raspberry Pi, it supports the Raspbian, Ubuntu, Win10 IoT, single-touch and free drive. When using as a computer monitor, It supports Windows 10/ 8. 1/ 8/ 7, five point touch and free drive.
• ♥ with protective case ♥ the Raspberry Pi Display comes with the protective case stand, which is made with Black acrylic. Raspberry Pi board can be installed on the back of the case.
• ♥ GOOD customer service ♥ If you need any technique support, Please let us know, we will be surely responsible to all problem. Or You could refer the QA.

User questions & answers

Question:	can I get the document to build this screen and case
Answer:	Hi here is the tutorial link: http://www.lcdwiki.com/7inch_HDMI_Display-C Any question please let us know, we are always happy to help. Thank you! [email protected]
Question:	Is the protective case assembled already
Answer:	No, you have to assemble it yourself. We ran into issues with the screen not being square on the PCB and so the front and screw holes on the protective case do not line up with the board. Since the screen is attached to the board with double-sided foam adhesive, I think we will be able to adjust it to fit, but I need an extra set of hands to do that.
Question:	Do you have to attach the raspberry pi 4 to the screen? Can I just use the screen like a mini desktop monitor with my raspberry pi as a mini desktop c
Answer:	Hi thanks for your question. It can be powered by an external DC5V adapter. It does not need to be powered by the Raspberry Pi's USB. It can be used as a display alone, so that it can't be touched, and the touch data can be transmitted simultaneously through the Raspberry Pi USB power supply. This will enable the touch function. For more question please feel free to contact us through email [email protected]. Thank you!
Question:	What connections does this screen use for the touch screen? usb,spi
Answer:	usb

Product features

Longruner 7Inch Raspberry Pi Touch Screen

Upgraded 7'' inch Raspberry Touch Screen with Case can better protect your screen , more clear picture with 1024 X 600 resolution.

Specification: LCD Size : 7.0 inch (Diagonal) Driver Element : A-Si TFT active matrix Display mode : Normally White ,Transmissive High Resolution: 1024x600 SSD1963 touch panel controller Dot pitch : 0.0642(W) X 0.1790(H)mm Active Area : 154.08(w)X 85.92(H) Module Size : 164.9(w)X100.0(H)x5.7(D)mm Surface Treatment : Anti-glare Color arrangement : RGB-Stripe nterface: Digital Blacklight : Highlighted LED lamp backlighting TFT Power(pin Name: 3.3V): The power of the screen is 2.8-3.3V; not use 5V, all the Pin's voltage on the module Can not be more than 3.3V. Backlight power supply (pin Name: 5V): backlight power range is 4.5-7V. Interface Type: 16 parallel Operating Temperature : -20 ~ +70 degrees centigrade Storage Temperature : -30 ~ +80 degrees centigrade

Feature: This 7 inch Capacitive Touch Screen can work with any device that have standard HDMI, but the touch function is just for windows and raspberry pi system.

Support vertical and horizontal image flipping

Supporting single touch for Raspberry Pi system This LSC7BC 7 inch HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems; With the use of Pi Raspberry, support Raspbian, Ubuntu, Windows 10 IoT Single-Touch, Free drive.

Support five points touch for windows system When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive

If you need the tutorial, you could download from Technical Specification, or looking for the QA, or let us know. We will be surely responsible for all problem, wish you have a good shopping experience.

Longruner 7 inch Touch Screen with case

Longruner 7 inch Touch Screen with case are compatiable for all devices with Standard HDMI port.

But the touch function is just for windows and raspberry pi system.

We are professional factory on making all electronics components based on Arduino and Raspberry Pi. And we also have processional engineer team to offer you tutorials so that you can start from the beginning.

Upgraded Image and Higher Resolution

This raspberry pi lcd tablet has vertical and horizontal image flip function. Image 4:3 / 16:9 display format conversion.

The resolution is 1024 X 600, upgraded multi visual choice, better enjoy colorful digital word.

Longruener 7 inch raspberry pi screen can work with update RPi 4B by connecting with RPi 4B adaptor.

If you need RPi 4B adaptor, please QA us or find us.

Supports single touch for Raspberry Pi system

Supports single touch for Raspberry Pi system

This SC7B 7 inch HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems; With the use of Pi Raspberry, support Raspbian, Ubuntu, Windows 10 IoT Single-Touch, Free drive.

Supports five points touch for windows system

When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch.

Supports USB power supply

Note: 1.Please note Supported Raspberry Pi 3 2 and RPi 1 Model B B+ BB Black.

2.Power Supply is not included.for PI ,do not require power supply.

3.There is a sticker on the LCD screen. Please peel off before use.

Packaging includes

7 Inch raspberry pi touch screen x 1

7 Inch Raspberry pi touch screen's protective case X1

7 inch HDMI LCD (B) x 1

HDMI cable x 1

USB type A plug to micro B plug cable x 1

RPi screws pack (4pcs) x 1

DVD × 1