12 best generic arduino starter kits

Product description

This Exclusive Arduino Deluxe Bundle includes everything you need to get started with Arduino - Including the only Official Starter Kit from Arduino (includes the Arduino Uno Revision 3 board), MAKE Magazine's "Getting Started with Arduino: The Open Source Electronics Prototyping Platform" and Speed Kits handy PIN-OUT Reference Chart for the Uno R3. No need to shop around for breadboards, sensors, LEDS, etc. This kit has it all and is designed to take you from Novice to Expert providing hours of instruction and a multitude of projects.



Just a few of the projects you can build using the parts and instructions included in this kit:



+ SPACESHIP INTERFACE design to control panel for your startship

+ KEYBOARD INSTRUMENT play music and make some noise with this keyboard

+ KNOCK LOCK tap out the secret code to open the door

+ ?TOUCHY-FEEL LAMP a lamp that responds to your touch

+ HACKING BUTTONS create a master control for all your devices!

+ LOVE-O-METER measure how hot-blooded you are

+ CRYSTAL BALL a mystical tour to answer all your tough question

+ Many, Many More



What's in the Box: The Official Arduino Starter Kit from Arduino, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback - December 28, 2014, Speed Kits Uno R3 PIN-OUT Chart

• Includes The Only Official Arduino Starter Kit From Arduino, The Best Selling Book From Make Magazine: Getting Started with Arduino: The Open Source Electronics Prototyping Platform and a Handy Uno R3 PIN-OUT Chart from Speed Kits
• Includes Book, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback
• Includes components for 15 projects
• Includes Arduino Uno R3 And Exclusive Speed-Kits Arduino PIN OUT Quick Reference Chart
• Includes a total of over 200 electronic parts and components

User questions & answers

Question:	List of all the parts
Answer:	Here's the parts list.... I highly recommend this kit if your just starting out with Arduino!The Arduino Starter Kit contains:1 x Arduino Projects Book1 x Arduino UNO Rev 3 microcontroller1 x USB cable1 x Breadboard1 x Easy-to-assemble wooden base1 x 9V battery snap70 x Solid core jumper wires2 x Stranded jumper wires6 x Photoresistors3 x Potentiometers (10K ohm)10 x Push buttons1 x Temperature sensor1 x Tilt sensor1 x Alphanumeric LCD (16x2 character display)1 x Bright white LED1 x Multicolor RGB LED8 x Red LEDs8 x Green LEDs8 x Yellow LEDs3 x Blue LEDs1 x Small DC motor (6/9V)1 x Small servo motor1 x Piezo capsule1 x H-bridge motor driver2 x Optocouplers5 x Transisitors2 x Mosfet transistors5 x 100nF capacitors3 x 100uF capacitors5 x 100pF capacitors5 x Diodes3 x Transparent gels (red, green, blue)1 x 40 pin male header strip20 x 220 ohm resistors5 x 560 ohm resistors5 x 1K ohm resistors5 x 4.7K ohm resistors10 x 10K ohm resistors5 x 1M ohm resistors5 x 10M ohm resistors
Question:	Can you recommend a case to keep all the parts in
Answer:	Hello! Thank you for reaching out! The dimensions of our mini beer pong table are 22" x 7.9" x 0.75" inches. If you have questions or concerns, don't hesitate to ask. We are more than happy to help! Thank you, Grown Man Games
Question:	Is there any programming and if there is not is there another official starter kit for it on amazon
Answer:	Hello - This table is designed for Beer Pong use and pong balls can bounce off the table.
Question:	What is the difference between this item and the other starter kit that sells for
Answer:	Yes

Product description

Important Notice:

⭐Kits designed only for Windows OS

⭐The 50M Guidance Document:Guidance Manual,Demo Code,Burning Tools,and Necessary Class Libraries.Download link label is pasted at the bottom of the packaging box.Or contact us on Amazon,we will send link on:

ET: 21:00 PM - 5:30 AM(Second Day)

PST: 18:00 PM - 2:30 AM(Second Day)



Result:

1) Get weather data from OpenWeathermap at regular intervals, showing the weather of today and weather forecast for next 3 days in any city in the world

2) Read the current temperature, humidity data indoor at regular intervals

3) Regular reading of atmospheric pressure, light intensity data

4) Upload temperature,humidity,atmospheric pressure and intensity of illumination data to thingspeak.com at regular intervals

5) View weather forecast on OLED display and view environmental monitoring chart on thingspeak.com



Guidance Manual Catalog:

Overview：This manual describes how to make a miniature weather station by Arduino IDE

Step 1: Install USB-To-Serial

Step 2: Install Arduino IDE for ESP8266

Step 3: Burning Firmware to ESP8266

Step 4: Connecting Components

Step 5: Register OpenWeathermap, thingspeak new account

Step 6: Import WeatherStation code in the Arduino IDE

Step 7: Add Library

Step 8: Modify File WeatherStation.ino

Step 9: Set the Board and Port again

Step 10: Burn code to ESP8266

Step 11: Result



AT-Firmware in Guidance Document:

Ai-Thinker_ESP8266_DOUT_8Mbit_v1.5.4.1-a_20171130.bin



Library attachment in Guidance Document:

esp8266-weather-station-master.zip(WeatherStation Source Code)

esp8266-oled-ssd1306-master.zip

json-streaming-parser-master.zip



Tools in Guidance Document:

ESP8266Flasher.exe

usb-to-serial.rar



Package List：

1xESP8266-12E

1xDHT11

1xBMP180

1xBH1750FVI

1xOLED Display

1xusb cable

2xbreadboard

20xdupont cable

• ✔️The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the SSD1306 OLED Display; the device can switch to display data from any city in the world - maybe your relatives or friends live there
• ✔️The device uses sensors DHT11, BMP180,BH1750FVI to collect temperature, humidity, Atmosphetic Pressure and light data. The weather station reads data indoor via sensor every 5 seconds and uploads it to the Internet every 60 seconds.You can see real-time data charts from your phone or computer.Of course you can modify the code to implement different functions
• ✔️【ESP8266】:CP2102 chip inside,Micro USB,4MB flash,full I/O port and wireless 802.11 supported IOT platform Arduino compatible. 【DHT11】 Sensor: A digital signal output with a calibrated temperature and humidity combined sensor.The simple communication protocol greatly reduces the programming effort required
• ✔️【BMP180】:high-precision, small size, ultra-low power 3μA pressure sensor.Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa.Can directly through the I2C bus connected with a variety of microprocessors.Pressure range: 300 ~ 1100hPa. 【BH1750FVI】:Digital Light intensity Sensor.Direct digital output, complex calculation is omitted, omitting calibration. 【OLED Yellow Blue Display】:0.96" SSD1306 128X64 Yellow&Blue OLED LCD Display with I2C IIC SPI Serial
• ✔️We have prepared weather station hardware.And 50M guidance manual,demo code,burning tools,necessary class libraries.Download link label is pasted at the bottom of the packaging box.or contact us on Amazon,we will send download link to you.Package List：1 x Esp8266-12E,1 x DHT11,1 x BMP180,1xBH1750FVI ,1 x OLED Display,2 x breadboard,20 x dupont cable,1 x usb cable

User questions & answers

Question:	The compiler links the libraries correctly, but i always get "error compiling for board nodemcu 0.9 (esp), any ideas
Answer:	Retropie in this kit will run up to ps1 games but certain games won't run due to processing power.
Question:	where is the link to the vendor to get the user guide? The small CD will not fit in my mac
Answer:	You need to buy a micro SD card (preferable preloaded with NOOBS.) I didn't realize this, so I had to order the card separately.Obviously, you need to buy a monitor and keyboard and mouse.It's running Linux, so it depends on what games you can find that run on Linux. Definitely NOT windows. This computer uses a ARM chip which is incompatible with Intel x86.
Question:	How do I contact the seller to get the downloads
Answer:	Honestly I don't trust the adhesive tape that comes with any of the raspberry pi heatsinks sold by any brand. If you are really worried about your Pi's temperature? Take the tape off the heatsinks, wipe them off with rubbing alcohol, and apply a genuine thermal paste yourself. This will help with your passive cooling, but you might want to add a fan if your running your Pi hot. My Pi, running Raspberrian Pixel at normal use, stays steady around 51 degrees Celsius (122 degrees Fahrenheit). This is well within the acceptable range. I am just using passive cooling as I am not using my Pi for anything extreme, just for learning about the Linux OS terminal commands.
Question:	How do I get the guidance document
Answer:	Just a converter from 240 to 110

Product description

Important Notice:

⭐Kits designed for Arduino and Raspberry Pi

⭐Guidance document download link label is pasted at the bottom of the packaging box

Guidance document include:Guidance Manual,Demo Code,Class Libraries



Guidance Manual Catalog:

Module 1: DHT11 temperature and humidity sensor

1． Introduction

2． Example(Work with Arduino)

Module 2: HC-SR501 Infrared sensor

1． Introduction

2． Example(Work with Arduino)

Module 3: GY-BMP280 Pressure Sensor

1． Introduction

2． Example(Work with Arduino)

Module 4: LM393 Photosensitive sensor

1． Introduction

2． Example(Work with Arduino)

Module 5: Soil Moisture sensor

1． Introduction

2． Example(Work with Arduino)

And so on... ...



Package List：

DHT11 Temperature and Humidity Sensor

HC-SR501 Infrared Sensor

GY-BMP280 Pressure Sensor

LM393 Photosensitive Sensor

Soil Moisture Sensor

KY-008 Sensor

TTP223B Touch Sensor

Water Level Sensor

Voltage Sensor

Speed Sensor

Linear Magnetic Hall Sensor

DuPont Cable(Male to female)

HC-SR04 Ultrasonic Sensor

Vibration Switch Sensor

Tracking Module

Microphone Sensor

Photosensitive Sensor

Obstacle Avoidance Sensor

Raindrop Sensor

Angle Sensor

Infrared Receive Sensor

Hall Magnetic Sensor

• ✔️High quality sensor module kit for Arduino and Raspberry pi. Good Feedback from our customers, so choose us you will get a High Quality and Reliable Kit,100% compatible with Arduino Raspberry Pi and STM32
• ✔️Total 22 sensors module kit, for the beginner, 22 in 1 modules sensor learning package includes most projects design for those beginners
• ✔️Unlike those cheap sensor kit, ideaspark sensor kit provides step-by-step instruction,overview, detailed circuit connection graph/video, verified sample code and library package which can save lot of user's research time and speed up the learning progress
• ✔️All sensors kit are carefully selected and tested. Removed useless, less used modules.We eliminate many old-fashioned sensors which have low reliability and duplicate function as other sensor in the kit. Therefore, it can save a lot of product and shipping cost for our users
• ✔️There are many companies selling some cheap sensor kit which has confusing instruction, wrong parts picture, misleading circuit graph and non-workable sample code. To make things worse, those low quality kit often contains many old sensors which have too many quality problems and are no longer supported by original manufacturers. Such kind of sensor kit brings user nothing but waste of money and time

User questions & answers

Question:

does this come with arduino uno board

Answer:

This is a maker product. both his LT and Chrome book are more powerful and versatile than this device most likely. IT is not best suited for day to day Desktop productivity. If your child wants to learn how to program and interphase with DIY hardware projects there is nothing better for them. The community that supports the Rpi is amazing. Go to there page (https://www.raspberrypi.org/about/)and you will see that it is all about creating hardware-software projects. I make retro arcade systems and robotic projects and others as a hobby.

Product description

THE MOST COMPLETE KIT OF THE MARKET: All the components that are included in the famous Arduino Starter Kit plus a lot of other modules, sensors and accessories.



We offer the best quality components, modules and sensors for the benefit of our most demanding clients, students and professionals.



The most complete selection of modules and components to learn applications with Arduino. Organized in a two-level box, ideal for transporting at school or in the workshop.



--Does not include power supply, only battery holder for 6xAA batteries (1.5Vx6=9VDC -- NOT INCLUDED) --

• -Arduino MEGA R3 (generic high quality) + USB cable -6xAA Battery holder (9VDC) -WiFi ESP8266 module -Model Bluetooth Master / Slave HC-05 -Box with plastic cells (organizer of components) -Shield for prototypes + Mini-Breadboard -Large Breadboard (830 points ) -Dupont Cables 10 * Female-Female + 10 * Male-Female + 10 Male-Male -Cable Jumper for breadboard -6 Push Buttons with multicolored caps -Joystick Module type PS2
• -RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003
• 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor)
• -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer)
• - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header

User questions & answers

Question:	How many blank Proto Boards come with this kit
Answer:	Windows,MAC and Linux.You can download the software from www.arduino.cc
Question:	Does it come with experiment details or manual or is it just parts
Answer:	Yes everything is compatible with the LAFVIN uno.
Question:	How do I get access to the free software library
Answer:	You can write your own programs using the Arduino interface. The sample programs that come with the starter kit are from the www.arduino .cc site and you can change them to make the UNO do what you want without reinventing the wheel. The nice part is, the resources at Arduino are free and this kit has a decent amount components to play with.
Question:	Could you identify on Amazon the power supply or cable needed so it can be purchased separately for this kit
Answer:	yes all will work fine, the difference is you will got more inputs and outs in the Mega 2560 but depends what kind of project you will work. If you want to work for a big project in future,the mega 2560 will be the better chooese. else if you only need test the basics Uno r3 its ok.

Product description

Arduino Uno R3 MCU Arduino R3 Shield Arduino IDE Starter Kit

Product Specification:

• :- Maker/DIY
• EducationalEducational Kits
• Mfr :- Arduino
• Series :- -
• Part Status :- Active
• Kit Type :- Starter Kit
• Main Purpose :- MCU
• Interconnect System :- Arduino R3 Shield
• Suggested Programming Environment :- Arduino IDE
• Utilized IC / Part :- ATmega328P
• Included MCU/MPU Board(s) :- Arduino Uno R3

• Kit Type :- Starter Kit
• EducationalEducational Kits
• Mfr :- Arduino
• Series :- -
• Part Status :- Active

• 【All in One Kit】The Grove Beginner Kit for Arduino is powered by one Arduino UNO compatible Board (ATmega320p based Seeeduino Lotus) together with 10 additional Grove Arduino sensors all in one piece of the board, including LED, Buzzer, OLED Display, Button, Rotary Potentiometer, Light Sensor, Sound Sensor, Temperature & Humidity Sensor, Air Pressure Sensor, 3-Axis Accelerator. It will bring you the simplest way to get started with Arduino.
• 【All Modules are Pre-Wired】All modules are pre-wired to the Seeeduino(Microcontroller) through the PCB stamp holes, no breadboard and jumper cables required. This is perfect for educational fields where frustrating wiring and soldering is no longer needed. Of course, you can also take the modules out and use Grove cables to connect the modules.
• 【12 Step by Step Tutorials】We've done all the hard work with example code and software libraries to help you running 12 different demos in just a few lines of code. Just contact us to get all the free resources and tutorials!
• 【Super Friendly to Beginner and STEAM Education】We have provided 12 step by step project tutorials and 74 pages PDF wiki, no matter you are a student, teacher, artist, hardware enthusiast, and so on, with the help of the Grove Beginner Kit for Arduino, you will get to know Arduino and start the Arduino project quickly. Just contact us to get all the free resources and tutorials!
• 【Compatible with 300+ Grove Modules】The Grove Beginner Kit for Arduino also compatible with over 300 grove sensors and modules. Grove makes it easier to connect, experiment, and simplify the prototyping process. No jumpers or soldering required. We have developed more than 300 Grove modules, covering a wide range of applications that can fulfil a variety of needs.

User questions & answers

Question:	Where is a link to the software
Answer:	George,I bought the MSI X99A SLI PLUS with the Intel Core i7-5820k which is the same socket as your board/cpu. Not only is it compatible, but it is keeping my cpu cooler than my friend's with a custom liquid cpu cooler. I highly recommend the Noctua NH-D15! If you have any further questions, don't hesitate to ask.~John
Question:	What is the difference between the two packages offered in this kit
Answer:	It should fit perfectly.This cooler height is 165mm and the case CPU cooler clearance is 180mm.
Question:	Which boards is the base shield compatible with
Answer:	using r5 with a ram that is not "compatible" (too tall) all you have to do is move the front fan a bit higher and it works like a charm. R5 has enough width to cover both regular fan layout and extended layout
Question:	You say "if you installed the portable arduino ide from usb drive, you can find all the module demos in the files -> sketch book" but there's nothing
Answer:	Yes it does, NT-H1 high-grade thermal compound.

Product features

Subvert the traditional Arduino kit

Unlike most Arduino kits, the Grove Beginner Kit for Arduino is an all-in-one kit, no breadboard, no soldering, even no wiring is needed. We cut all those muss and fuss, aiming to give you the best experience, you only need to focus on coding and Arduino Learning.

All the modules have been connected to the Seeeduino(Microcontroller) through the PCB stamp holes so no Grove cables are needed to connect. This is perfect for educational fields where frustrating wiring and soldering is no longer needed.

Of course, you can also take the modules out and use Grove cables to connect the modules. You can build any Arduino project you like with this Grove Beginner Kit For Arduino.

Plug and Play Unboxing Demo

The Grove Beginner Kit has a plug and plays unboxing demo, where you first plug in the power to the board, you get the chance to experience all the sensors in one go! Use the button and rotary potentiometer to experience each sensor demo!

• Scroll -> Rotating Rotary Potentiometer
• Select -> Short Press Button
• Exit Current Demo -> Long Press Button

Buzzer and LED module are used for key prompt.

Hardware Overview

Note: Dimensions - 17.69 * 11.64 * 1.88cm

1. Grove - LED: Simple LED module
2. Grove - Buzzer: Piezo Buzzer
3. Grove - OLED Display 0.96": 128×64 dot resolution High brightness,self-emission and high contrast ratio Big screen on a compact design Low power consumption.
4. Grove - Button: Momentary Push Button
5. Grove - Rotary Potentiometer: Adjustable Potentiometer
6. Grove - Light: Detects surrounding light intensity
7. Grove - Sound: Detects surrounding sound intensity
8. Grove - Temperature & Humidity Sensor: Detects surrounding temperature and humidity values
9. Grove - Air Pressure Sensor: Detects surrounding atmospheric pressure
10. Grove - 3-Axis Accelerator: Detects object acceleration
11. Seeeduino Lotus: Arduino Compatible Board with Grove Ports

Note: By default, Grove modules are connected to Seeeduino via PCB stamp holes. This means you don't need to use Grove cables to connect if not broken out.

• A programming and electronics kit designed for remote learning, including step-by-step lessons and complete guidance
• Get a code to access 9 online lessons and 2 projects - a total of 25 hours of learning time; There is a downloadable PDF logbook with exercises and activities
• Includes all the components needed to complete the lessons and projects, including a multimeter, sensors, LEDs, and cables
• Intended for ages 11+, the kit can be used for remote teaching, homeschooling, self-learning or as a maker hobby
• Lessons and projects are integrated into different subjects, e.g. physics, chemistry, and history

Product features

The Arduino Student Kit: bring the buzz home!

Enter the Arduino Student Kit. This affordable home-schooling kit is bursting with fun, engaging, and creative electronics and programming projects designed for students aged 11+ to do individually.

• 1. Designed based on OSOYOO Basic Board for Arduino, the self-balancing robot car kit is a fun and educational Arduino learning kit.
• 2. High-precision motor with hall encoder, make it more superior, more powerful, safer.
• 3. A perfect choice of master knowledge of PID (Proportion Integral Differential ) for beginner, children, students and so on.
• 4. Controller - OSOYOO Basic Board for Arduino; 3-axis Accelerometer Gyroscope Sensor - MPU6050; Motor Driver - TB6612

User questions & answers

Question:	Is this really as big as it looks in the photos? That water bottle looks huge
Answer:	Yes, the ones I received were R3 boards.
Question:	It does not work out of box. motors run continuously. how do I get help
Answer:	The most basic Arduino starter kit is only $34 if you are an Amazon Prime member. This includes shipping. I'm not sure where you can get a fully functional micro controller board that includes software examples for less without designing one yourself.
Question:	Do i need to buy my own charger for the batteries or does the robot charge them
Answer:	The material is probably targeted to a 7th grade reading level, or a lexile of about 600. Using these kits requires an understanding of discrete electronics and computer programming. If your child hasn't already used the electronic project kits to build things like AM radios or flashing lights, I would start there instead. They would also need to get an understanding of programming basics. It will be a big time investment for you. I'm not saying it can't be done. I was working with electronics at 8, and programming in BASIC at 10.
Question:	No documentation in box, where do you get the manual
Answer:	You are kind of limited in creating stuff if you use only the parts that are included in this kit, but you can still build something great if you use your imagination, this kit is basically only for learning, for example starting with blinking leds and how to program it to do it. One of my first projects was modifying a plasma ball (a toy you can search up in internet) so it would turn on and off in synchronization with some kind of music, i had to modify that toy a bit and build a small circuit on a breadbord using a relay (because including transistors couldn't withstand the voltage), and looked up some tutorials about coding it because programming it was very complex, but in the end it came out great and i have gained a lot of experience. You can just search on youtube "arduino projects" and you will see all the amazing stuff people have made with it.

Product features

Android Smart Phone Control

The self-balancing robot Kit has multiple functions, such as balances, moves, run with two wheels, and controlled by Android APP. You can use an Android Smart Phone to control the car's movement by bluetooth.

Strong Load

Three-layer structure design, the top layer can load things or DIY extension by yourself , the car's width is 200mm, height is 125mm, has strong load balancing capacity, load can be balanced up to 2KG, more than twice as much as the dead weight.

Powerful Motor

For the balancing car, the powerful motor is better than the fancy description, the balancing car adopts the original JGB37-520B high-power motor, which has excellent horsepower performance.

Bluetooth Module

The balancing car kit includes a buletooth module, use the bluetooth module, can easily communicate with Android smart phone, the phone can control the movement of the car by APP.

Inertial Measurement Unit MPU-6050

Industrial-level integration 6 axis motion processing module， usually use for wearable devices and smart phones. It measures and reports the car's balance parameter, like velocity, orientation and gravity.

Driver TB6612FNG

TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). The two motor outputs can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz.

Product description

Description:

This kit contains 458pcs electronic component, suitable for Arduion, 3D Printer, Raspberry Pi, STM32 etc. project development and application, meets all kinds of function requirements.



Package Include:

1pcs Power Supply Module,WARNING: Pls. do not use the voltage higher than 9V

1pcs 830 tie-points Breadboard

65pcs Bread Board Jumper Wire

140pcs Solderless Jumper Wire

20pcs Female-to-male Dupont Wire

2pcs Pin header (40pin)

1pcs Precision Potentiometer

2pcs Photoresistor

1pcs Thermistor

5pcs Diode Rectifier (1N4007)

5pcs NPN Transistor (PN2222)

1pcs IC 4N35

1pcs IC 74HC595

1pcs Active Buzzer

1pcs Passive Buzzer

10pcs Button (small)

10pcs 22pf Ceramic Capacitor

10pcs 104 Ceramic Capacitor

5pcs Electrolytic Capacitor (10UF 50V)

5pcs Electrolytic Capacitor (100UF 50V)

10pcs White LED

10pcs Yellow LED

10pcs Blue LED

10pcs Green LED

10pcs Red LED

1pcs RGB LED

10pcs Resistor (10R)

10pcs Resistor (100R)

30pcs Resistor (220R)

10pcs Resistor (330R)

10pcs Resistor (1K)

10pcs Resistor (2K)

10pcs Resistor (5K1)

10pcs Resistor (10K)

10pcs Resistor (100K)

10pcs Resistor (1M)

• This kit contains power supply components for Arduino, Raspberry Pi that project based on breadboard.
• Power Adaptor: 12V 1A 12W, can supplying power for project stability.
• Breadboard: 830 tie-point MB-102 solderless breadboard, size 16.5x5.5x0.85cm.
• Power Module: MB-102 breadboard DC voltage-stabilized source module, compatible with 5V, 3.3V; Input Voltage: DC 6.5-12V or USB power supply, Output 700 ma (MAX), two way independent control, can switch 0V / 3.3V / 5V.
• Jumper: 65pcs colorful breadboard jumper, convenient to connect module.

• 🌟 26 Projects for Raspberry Pi beginners: this Raspberry Pi starter kit comes with DVD tutorial which is perfect choice for beginners to learn Raspberry Pi, electronics and program.
• 🌟 Python and C code are provided: it is esay for you to learn Raspberry Pi and C&&Python programming.
• 🌟 CD ROM in the product box: all the files were pre-stored in the CD ROM, which can provide powerful assistance in programming learning.
• 🌟 Compatible models: Raspberry Pi 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT included in this kit)
• 🌟 Pretty project box, and it is a wonderful gift for children.

User questions & answers

Question:	Does it comes with adc sensors + and adc chip
Answer:	i did not check yet
Question:	how do i find out which modem is in my computer
Answer:	The tilt switch is a glass capsule that contains inside a drop of mercury. The mercury is inside the glass capsule and it is not in any means in contact with the user. Even though the glass capsule is very resistant care must be take in order to avoid break the glass capsule.
Question:	Can you give some examples of projects in the guide
Answer:	No
Question:	Do I have to buy a rasberry pi separately
Answer:	Many of these modules require Power and Ground connections that do not conveniently line up with Arduino and Rasp-pi pins. The signals are compatible with Arduino and rasp-pi but they need jumper wires to be connected correctly to the input and output pins. That said, they will plug into a breadboard strip for easy connections.

Product features

Adeept Starter Learning Kit for Raspberry Pi 3 2 Model B/B+ Python ADXL345 GPIO Cable DC Motor

This is a Ultimate Starter Leaning Kit for Raspberry Pi and it is a more comprehensive kit than our other Raspberry Pi Kits, this kit contains more than 50 kinds of different electronic components, more than 180 components are included. With this kit, we will take you from knowing to utilizing, you are able to do more experiment, get your more idea into real action without the restriction of hardware and software, and we have carefully prepared a guide book(PDF) and supporting experimental code routine for you, including a total of 26 experiments.

• Raspberry Pi Development Board is not included.
• Provided with: Python and C code are provided.
• Compatible withRaspberry Pi 3 2 Model B/B+.
• Includes common sensor modules such as: buzzers, LEDs, Triaxial Accelerometer Sensor Module, PS2 Joystick Module, Ultrasonic Distance Sensor Module, PIR Movement Sensor, Ultrasonic module etc, allow you make a lot of interesting projects like Servo Controling, Controlling an LED with a button, LED Flowing Lights, Measure the distance, Joystick Test, Ultrasonic control DC motor, Ultrasonic control RGB bar, etc.
• Easy to assemble, encourages learning: Perfect DIY inventor project for Raspberry Pi experiment and programming beginners.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

Measure the distance

Learn how to measure the distance with the ultrasonic distance sensor.

You will see the distance between the obstacle and the ultrasonic sensor display on the screen.

Temperature & Humidity Sensor—DHT-11

Learn how to use DHT-11 to collect temperature and humidity data.

You can see the temperature and humidity data displayed on the terminal.

Controlling a RGB LED with PWM

Program the Raspberry Pi for RGB LED control, and make RGB LED emits a variety of colors of light.

You can see that the RGB LED emitting red, green, blue, yellow, white and purple light, then the RGB LED will be off, each state continues 1s, after repeating the above procedure.

4-digit 7-segment display

Program the Raspberry Pi to achieve the controlling of 4-digit 7-segment display.

You should see the number is displayed on the segment display.

LED Bar Graph

Learn how to control an LED bar graph by programming the Raspberry Pi.

When you turn the knob of the potentiometer, you will see that the number of LED in the LED bar graph will be changed.

DC Motor

Learn how to control the state of DC motor with Raspberry Pi.

The state of DC motor includes its forward, reverse, acceleration, deceleration and stop. Besides, you can do some interesting applications with the combination of this course and your prior knowledge.

PS2 Joystick

Learn the usage of joystick.

You should see that the joystick state information displayed on the terminal.

A Simple Voltmeter

Make a simple voltmeter with Raspberry Pi and LCD1602.

We will measure the voltage of the potentiometer’s adjustment end with the simple voltmeter and display it on the LCD1602.

Product description

Microcontroller Microchip ATmega328P

Operating Voltage 5V

USB Standard Type B

Digital I/O Pins 14

PWM Digital I/O Pins 6

Analog Input Pins 6

Flash Memory 32 KB

SRAM 2 KB

EEPROM 1 KB

Clock Speed 16 MHz

• This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs
• Arduino Uno is the most used and documented board in the world
• "Uno" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0, now evolved to newer releases
• It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button
• Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users

User questions & answers

Question:	Does it come with a usb cable
Answer:	Made in Italy. Correct LED color and screen printing on mine. Don't know why the other reviewers had issues, but as of June 2013 the Arduino is authentic.
Question:	Are the boards sold by Mp3Car Store genuine? Order is fulfilled by Amazon but some sellers are selling fake boards
Answer:	Your best bet is probably gonna be contacting the manufacturer. Unless you can find lengths of key stock shaped the same, and cut down to what is needed... but that is just a guess. Good luck.
Question:	Do these come with the arduino.org label and not arduio.cc? There was a falling out and to support original founders they need to be arduino.cc
Answer:	The box says 16 3/4".
Question:	Is this an original Italy made Arduino?? or china product
Answer:	It comes with a set of 2 Jack stands.

• Each cable length: about 20 cm /8-inch
• The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers
• Including 1X 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires
• Packing in a color box.
• We have always cared about the customer experience and improve the product function details

User questions & answers

Question:	Which color wires are rx, tx and ground? Or does that not matter
Answer:	this can be installed to a factory alarm system you need to have a direct electronics alarm system hooked up to your car (Viper)
Question:	Can you run a 12v, 3amp linear actuator with these wires
Answer:	I want to know this as well. I read that this sensor comes with a 3-pin connector, but most Viper alarms have the 4-pin sensor input connector. I cannot find the 4-pin connector harness to adapt this 507M. Please, anyone, please advise!EDIT: This one has a 3-pin connector on the other end of the sensor, which does not make any sense. This sensor is not plug-n-play with any DEI alarm system and you need to hard-wire it in yourself manually. The reason is the ground for this sensor needs to go to the orange GWA wire (Ground When Armed wire). This tilt motion sensor needs to always re-calibrate itself when the alarm is first armed.DEI never made a sensor input port that is 3-pin. I am not sure why DEI doesn't modify the new tilt motion sensors with just hanging leads.
Question:	What is the wire made of? Silicone wire? Which would be preferable
Answer:	507m triggers at 3 degrees of movement up or down. Yes it would trigger alarm if there's waves. I'd recommend putting your system in valet mode when taking the ferry.
Question:	Can these work on a raspberry pi breadboard
Answer:	Yes, you wire the sensor wire to the factory door switch wire.

Product features

Product Features

Material: copper-clad aluminum,PVC

Each cable length: about 20 cm /8-inches

The male ends meant for insertion into standard 0.1"(2.54mm) female sockets and the female ends are meant for insertion into standard 0.1"(2.54mm) male headers.

The cables can be separated into single root as you request to do multiple connection.

What's in Package

1pcs 40-pin male to female jumper wires

1pcs 40-pin male to malejumper wires

1pcs 40-pin female to female jumper wires

What are they used for?

Widely used in electronic projects for connections .

It can be used for the expansion of the experimental board pin and increase experimental projects.

You can quickly conduct circuit testing without welding.

It can be reused if the terminal is not damaged.

Professional and in-time after-sale service

We have professional engineering supporting team, pls. reach us if you need any help and we'll do our best to give you a great experience with our products and service. Your any comment will be highly regarded.