11 best generic arduino kits

Product description

Important Notice:

⭐Kits designed for Arduino and Raspberry Pi

⭐Guidance document download link label is pasted at the bottom of the packaging box

Guidance document include:Guidance Manual,Demo Code,Class Libraries



Guidance Manual Catalog:

Module 1: DHT11 temperature and humidity sensor

1． Introduction

2． Example(Work with Arduino)

Module 2: HC-SR501 Infrared sensor

1． Introduction

2． Example(Work with Arduino)

Module 3: GY-BMP280 Pressure Sensor

1． Introduction

2． Example(Work with Arduino)

Module 4: LM393 Photosensitive sensor

1． Introduction

2． Example(Work with Arduino)

Module 5: Soil Moisture sensor

1． Introduction

2． Example(Work with Arduino)

And so on... ...



Package List：

DHT11 Temperature and Humidity Sensor

HC-SR501 Infrared Sensor

GY-BMP280 Pressure Sensor

LM393 Photosensitive Sensor

Soil Moisture Sensor

KY-008 Sensor

TTP223B Touch Sensor

Water Level Sensor

Voltage Sensor

Speed Sensor

Linear Magnetic Hall Sensor

DuPont Cable(Male to female)

HC-SR04 Ultrasonic Sensor

Vibration Switch Sensor

Tracking Module

Microphone Sensor

Photosensitive Sensor

Obstacle Avoidance Sensor

Raindrop Sensor

Angle Sensor

Infrared Receive Sensor

Hall Magnetic Sensor

• ✔️High quality sensor module kit for Arduino and Raspberry pi. Good Feedback from our customers, so choose us you will get a High Quality and Reliable Kit,100% compatible with Arduino Raspberry Pi and STM32
• ✔️Total 22 sensors module kit, for the beginner, 22 in 1 modules sensor learning package includes most projects design for those beginners
• ✔️Unlike those cheap sensor kit, ideaspark sensor kit provides step-by-step instruction,overview, detailed circuit connection graph/video, verified sample code and library package which can save lot of user's research time and speed up the learning progress
• ✔️All sensors kit are carefully selected and tested. Removed useless, less used modules.We eliminate many old-fashioned sensors which have low reliability and duplicate function as other sensor in the kit. Therefore, it can save a lot of product and shipping cost for our users
• ✔️There are many companies selling some cheap sensor kit which has confusing instruction, wrong parts picture, misleading circuit graph and non-workable sample code. To make things worse, those low quality kit often contains many old sensors which have too many quality problems and are no longer supported by original manufacturers. Such kind of sensor kit brings user nothing but waste of money and time

User questions & answers

Question:

does this come with arduino uno board

Answer:

This is a maker product. both his LT and Chrome book are more powerful and versatile than this device most likely. IT is not best suited for day to day Desktop productivity. If your child wants to learn how to program and interphase with DIY hardware projects there is nothing better for them. The community that supports the Rpi is amazing. Go to there page (https://www.raspberrypi.org/about/)and you will see that it is all about creating hardware-software projects. I make retro arcade systems and robotic projects and others as a hobby.

Product description

This Exclusive Arduino Deluxe Bundle includes everything you need to get started with Arduino - Including the only Official Starter Kit from Arduino (includes the Arduino Uno Revision 3 board), MAKE Magazine's "Getting Started with Arduino: The Open Source Electronics Prototyping Platform" and Speed Kits handy PIN-OUT Reference Chart for the Uno R3. No need to shop around for breadboards, sensors, LEDS, etc. This kit has it all and is designed to take you from Novice to Expert providing hours of instruction and a multitude of projects.



Just a few of the projects you can build using the parts and instructions included in this kit:



+ SPACESHIP INTERFACE design to control panel for your startship

+ KEYBOARD INSTRUMENT play music and make some noise with this keyboard

+ KNOCK LOCK tap out the secret code to open the door

+ ?TOUCHY-FEEL LAMP a lamp that responds to your touch

+ HACKING BUTTONS create a master control for all your devices!

+ LOVE-O-METER measure how hot-blooded you are

+ CRYSTAL BALL a mystical tour to answer all your tough question

+ Many, Many More



What's in the Box: The Official Arduino Starter Kit from Arduino, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback - December 28, 2014, Speed Kits Uno R3 PIN-OUT Chart

• Includes The Only Official Arduino Starter Kit From Arduino, The Best Selling Book From Make Magazine: Getting Started with Arduino: The Open Source Electronics Prototyping Platform and a Handy Uno R3 PIN-OUT Chart from Speed Kits
• Includes Book, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback
• Includes components for 15 projects
• Includes Arduino Uno R3 And Exclusive Speed-Kits Arduino PIN OUT Quick Reference Chart
• Includes a total of over 200 electronic parts and components

User questions & answers

Question:	List of all the parts
Answer:	Here's the parts list.... I highly recommend this kit if your just starting out with Arduino!The Arduino Starter Kit contains:1 x Arduino Projects Book1 x Arduino UNO Rev 3 microcontroller1 x USB cable1 x Breadboard1 x Easy-to-assemble wooden base1 x 9V battery snap70 x Solid core jumper wires2 x Stranded jumper wires6 x Photoresistors3 x Potentiometers (10K ohm)10 x Push buttons1 x Temperature sensor1 x Tilt sensor1 x Alphanumeric LCD (16x2 character display)1 x Bright white LED1 x Multicolor RGB LED8 x Red LEDs8 x Green LEDs8 x Yellow LEDs3 x Blue LEDs1 x Small DC motor (6/9V)1 x Small servo motor1 x Piezo capsule1 x H-bridge motor driver2 x Optocouplers5 x Transisitors2 x Mosfet transistors5 x 100nF capacitors3 x 100uF capacitors5 x 100pF capacitors5 x Diodes3 x Transparent gels (red, green, blue)1 x 40 pin male header strip20 x 220 ohm resistors5 x 560 ohm resistors5 x 1K ohm resistors5 x 4.7K ohm resistors10 x 10K ohm resistors5 x 1M ohm resistors5 x 10M ohm resistors
Question:	Can you recommend a case to keep all the parts in
Answer:	Hello! Thank you for reaching out! The dimensions of our mini beer pong table are 22" x 7.9" x 0.75" inches. If you have questions or concerns, don't hesitate to ask. We are more than happy to help! Thank you, Grown Man Games
Question:	Is there any programming and if there is not is there another official starter kit for it on amazon
Answer:	Hello - This table is designed for Beer Pong use and pong balls can bounce off the table.
Question:	What is the difference between this item and the other starter kit that sells for
Answer:	Yes

Product description

Important Notice:

⭐Kits designed only for Windows OS

⭐The 50M Guidance Document:Guidance Manual,Demo Code,Burning Tools,and Necessary Class Libraries.Download link label is pasted at the bottom of the packaging box.Or contact us on Amazon,we will send link on:

ET: 21:00 PM - 5:30 AM(Second Day)

PST: 18:00 PM - 2:30 AM(Second Day)



Result:

1) Get weather data from OpenWeathermap at regular intervals, showing the weather of today and weather forecast for next 3 days in any city in the world

2) Read the current temperature, humidity data indoor at regular intervals

3) Regular reading of atmospheric pressure, light intensity data

4) Upload temperature,humidity,atmospheric pressure and intensity of illumination data to thingspeak.com at regular intervals

5) View weather forecast on OLED display and view environmental monitoring chart on thingspeak.com



Guidance Manual Catalog:

Overview：This manual describes how to make a miniature weather station by Arduino IDE

Step 1: Install USB-To-Serial

Step 2: Install Arduino IDE for ESP8266

Step 3: Burning Firmware to ESP8266

Step 4: Connecting Components

Step 5: Register OpenWeathermap, thingspeak new account

Step 6: Import WeatherStation code in the Arduino IDE

Step 7: Add Library

Step 8: Modify File WeatherStation.ino

Step 9: Set the Board and Port again

Step 10: Burn code to ESP8266

Step 11: Result



AT-Firmware in Guidance Document:

Ai-Thinker_ESP8266_DOUT_8Mbit_v1.5.4.1-a_20171130.bin



Library attachment in Guidance Document:

esp8266-weather-station-master.zip(WeatherStation Source Code)

esp8266-oled-ssd1306-master.zip

json-streaming-parser-master.zip



Tools in Guidance Document:

ESP8266Flasher.exe

usb-to-serial.rar



Package List：

1xESP8266-12E

1xDHT11

1xBMP180

1xBH1750FVI

1xOLED Display

1xusb cable

2xbreadboard

20xdupont cable

• ✔️The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the SSD1306 OLED Display; the device can switch to display data from any city in the world - maybe your relatives or friends live there
• ✔️The device uses sensors DHT11, BMP180,BH1750FVI to collect temperature, humidity, Atmosphetic Pressure and light data. The weather station reads data indoor via sensor every 5 seconds and uploads it to the Internet every 60 seconds.You can see real-time data charts from your phone or computer.Of course you can modify the code to implement different functions
• ✔️【ESP8266】:CP2102 chip inside,Micro USB,4MB flash,full I/O port and wireless 802.11 supported IOT platform Arduino compatible. 【DHT11】 Sensor: A digital signal output with a calibrated temperature and humidity combined sensor.The simple communication protocol greatly reduces the programming effort required
• ✔️【BMP180】:high-precision, small size, ultra-low power 3μA pressure sensor.Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa.Can directly through the I2C bus connected with a variety of microprocessors.Pressure range: 300 ~ 1100hPa. 【BH1750FVI】:Digital Light intensity Sensor.Direct digital output, complex calculation is omitted, omitting calibration. 【OLED Yellow Blue Display】:0.96" SSD1306 128X64 Yellow&Blue OLED LCD Display with I2C IIC SPI Serial
• ✔️We have prepared weather station hardware.And 50M guidance manual,demo code,burning tools,necessary class libraries.Download link label is pasted at the bottom of the packaging box.or contact us on Amazon,we will send download link to you.Package List：1 x Esp8266-12E,1 x DHT11,1 x BMP180,1xBH1750FVI ,1 x OLED Display,2 x breadboard,20 x dupont cable,1 x usb cable

User questions & answers

Question:	The compiler links the libraries correctly, but i always get "error compiling for board nodemcu 0.9 (esp), any ideas
Answer:	Retropie in this kit will run up to ps1 games but certain games won't run due to processing power.
Question:	where is the link to the vendor to get the user guide? The small CD will not fit in my mac
Answer:	You need to buy a micro SD card (preferable preloaded with NOOBS.) I didn't realize this, so I had to order the card separately.Obviously, you need to buy a monitor and keyboard and mouse.It's running Linux, so it depends on what games you can find that run on Linux. Definitely NOT windows. This computer uses a ARM chip which is incompatible with Intel x86.
Question:	How do I contact the seller to get the downloads
Answer:	Honestly I don't trust the adhesive tape that comes with any of the raspberry pi heatsinks sold by any brand. If you are really worried about your Pi's temperature? Take the tape off the heatsinks, wipe them off with rubbing alcohol, and apply a genuine thermal paste yourself. This will help with your passive cooling, but you might want to add a fan if your running your Pi hot. My Pi, running Raspberrian Pixel at normal use, stays steady around 51 degrees Celsius (122 degrees Fahrenheit). This is well within the acceptable range. I am just using passive cooling as I am not using my Pi for anything extreme, just for learning about the Linux OS terminal commands.
Question:	How do I get the guidance document
Answer:	Just a converter from 240 to 110

Product description

Reyann Zero Delay Arcade USB Encoder Pc to Joystick for Mame Jamma & Other Pc Fighting Games

• Zero Delay Arcade USB Encoder For Your Pc Game DIY!
• Generic Game Controller support PC & Raspberry Pi 1/2/3
• Use this Encoder you can build your own Arcade Game Machine!
• 100% Zero Delay USB Encoder to Arcade Joystick! High Quality!
• Support All Joystick and Push Button types which with 4.8mm Terminal!

Features:

Zero Delay Arcade USB Encoder for Your PC Game DIY.

Use this Encoder you can build your own Arcade Game Machine.

Easy Installation Design! Just connected to the push button and joystick.

Support All Joystick and Push Button types which with 4.8mm Terminal.

Support all windows systems & Raspberry Pi Retropie Projects.

It is also a compact encoder. The size for the encoder board just 8.5cm*3.5cm*1cm.

It also can support most Arcade Emulations, Such as MAME, JAMMA & other PC gaming console emulation.

You just need to simply connect your arcade controls into the encoder board with the included wires, then plug the encoder into your computer USB Port. And then just enjoy your arcade Games with your PC.



 

Encoder Feature:

• 100% Zero Delay Game Control Board.
• High performance COMS technology.
• The Joystick IC supports multiple game equipment form.And in two kinds of equipment .Digital mode, Analog mode can arbitrary switching.
• Support TURBO, AUTO, MODE & CLEAR Functions with LED twinkle.

What's inside the package?

• 1x Zero Delay USB Encoder
• 1x USB Cable
• 1x Small Wire Harness bundle for joystick
• 1x Large Wire Harness bundle for push button
• 1x User Manual

• Zero Delay Arcade USB Encoder For Your Pc Game DIY!
• Generic Game Controller support PC & Raspberry Pi 1/2/3
• Use this Encoder you can build your own Arcade Game Machine!
• 100% Zero Delay USB Encoder to Arcade Joystick! High Quality!
• Support All Joystick and Push Button types which with 4.8mm Terminal!

User questions & answers

Question:	Will this work with ps3 or ps
Answer:	I don’t see any available
Question:	Is a dpad counted as a joystick, or would it utilize 4 of the 12 buttons
Answer:	Mine is a hardware Rev 1.2.
Question:	Any info for compatibility with raspberry 4 ?? I read about 1-2 and 3, but no mention about 4... or if there is a new version coming to work with it
Answer:	It hasn't been an issue for me because it came with its own power adapter. However, when I do a 'cat /proc/cpuinfo' command, the last line says: "Raspberry Pi 4 Model B Rev 1.2"
Question:	What are the dimmensions of this board? Length Width and height to top of jack
Answer:	Can you download SUSE or Red Hat or any other distro from it's maker and install it? Most likely not. Are their versions of Linux that run on Raspberry Pi? Several are available. Can you game on it? Simple old school games will probably be okay, but anything with great graphics that require lots of GPU power will be mostly unplayable. Will it run Windows? There is a stripped down version of Win10 meant for little more the the Internet of Things (think hardware controller like remote thermostats, light control, security systems and the like). Is it a complete computer? Almost. You need a Micro-SD card (8GB minimum, 32 GB Max) as the boot drive. You can buy one bare and use another computer to install your favorite distro on your new SD card OR you can buy a SD card with the NOOBS distro already on it. You'll also need a mouse, keyboard and monitor to use it for anything more than a headless device controller. If you need more storage than what you have as a boot drive you can add extra storage by installing a USB storage device like a USB thumb drive or even an external harddrive. Unlike earlier RPis, this RPi3 comes with on board Wifi and BT as well as the standard 100Mb wired network. With all that said I use both of my RPi3s as Media Centers playing out up to 1080p video from my network server to my TVs around the house using the OpenElec distro. OpenElec is a Kodi based distro and as such does pretty much nothing but Media Center stuff. You can also install Raspian which is more of a full Linux distro that you can also run Kodi on. They replace the Windows 7 based laptops running MediaCenter and using about 40 watts/hr with Kodi MediaCenters using about 400 mw/hr at full chat.

• 【All in One Kit】The Grove Beginner Kit for Arduino is powered by one Arduino UNO compatible Board (ATmega320p based Seeeduino Lotus) together with 10 additional Grove Arduino sensors all in one piece of the board, including LED, Buzzer, OLED Display, Button, Rotary Potentiometer, Light Sensor, Sound Sensor, Temperature & Humidity Sensor, Air Pressure Sensor, 3-Axis Accelerator. It will bring you the simplest way to get started with Arduino.
• 【All Modules are Pre-Wired】All modules are pre-wired to the Seeeduino(Microcontroller) through the PCB stamp holes, no breadboard and jumper cables required. This is perfect for educational fields where frustrating wiring and soldering is no longer needed. Of course, you can also take the modules out and use Grove cables to connect the modules.
• 【12 Step by Step Tutorials】We've done all the hard work with example code and software libraries to help you running 12 different demos in just a few lines of code. Just contact us to get all the free resources and tutorials!
• 【Super Friendly to Beginner and STEAM Education】We have provided 12 step by step project tutorials and 74 pages PDF wiki, no matter you are a student, teacher, artist, hardware enthusiast, and so on, with the help of the Grove Beginner Kit for Arduino, you will get to know Arduino and start the Arduino project quickly. Just contact us to get all the free resources and tutorials!
• 【Compatible with 300+ Grove Modules】The Grove Beginner Kit for Arduino also compatible with over 300 grove sensors and modules. Grove makes it easier to connect, experiment, and simplify the prototyping process. No jumpers or soldering required. We have developed more than 300 Grove modules, covering a wide range of applications that can fulfil a variety of needs.

User questions & answers

Question:	Where is a link to the software
Answer:	George,I bought the MSI X99A SLI PLUS with the Intel Core i7-5820k which is the same socket as your board/cpu. Not only is it compatible, but it is keeping my cpu cooler than my friend's with a custom liquid cpu cooler. I highly recommend the Noctua NH-D15! If you have any further questions, don't hesitate to ask.~John
Question:	What is the difference between the two packages offered in this kit
Answer:	It should fit perfectly.This cooler height is 165mm and the case CPU cooler clearance is 180mm.
Question:	Which boards is the base shield compatible with
Answer:	using r5 with a ram that is not "compatible" (too tall) all you have to do is move the front fan a bit higher and it works like a charm. R5 has enough width to cover both regular fan layout and extended layout
Question:	You say "if you installed the portable arduino ide from usb drive, you can find all the module demos in the files -> sketch book" but there's nothing
Answer:	Yes it does, NT-H1 high-grade thermal compound.

Product features

Subvert the traditional Arduino kit

Unlike most Arduino kits, the Grove Beginner Kit for Arduino is an all-in-one kit, no breadboard, no soldering, even no wiring is needed. We cut all those muss and fuss, aiming to give you the best experience, you only need to focus on coding and Arduino Learning.

All the modules have been connected to the Seeeduino(Microcontroller) through the PCB stamp holes so no Grove cables are needed to connect. This is perfect for educational fields where frustrating wiring and soldering is no longer needed.

Of course, you can also take the modules out and use Grove cables to connect the modules. You can build any Arduino project you like with this Grove Beginner Kit For Arduino.

Plug and Play Unboxing Demo

The Grove Beginner Kit has a plug and plays unboxing demo, where you first plug in the power to the board, you get the chance to experience all the sensors in one go! Use the button and rotary potentiometer to experience each sensor demo!

• Scroll -> Rotating Rotary Potentiometer
• Select -> Short Press Button
• Exit Current Demo -> Long Press Button

Buzzer and LED module are used for key prompt.

Hardware Overview

Note: Dimensions - 17.69 * 11.64 * 1.88cm

1. Grove - LED: Simple LED module
2. Grove - Buzzer: Piezo Buzzer
3. Grove - OLED Display 0.96": 128×64 dot resolution High brightness,self-emission and high contrast ratio Big screen on a compact design Low power consumption.
4. Grove - Button: Momentary Push Button
5. Grove - Rotary Potentiometer: Adjustable Potentiometer
6. Grove - Light: Detects surrounding light intensity
7. Grove - Sound: Detects surrounding sound intensity
8. Grove - Temperature & Humidity Sensor: Detects surrounding temperature and humidity values
9. Grove - Air Pressure Sensor: Detects surrounding atmospheric pressure
10. Grove - 3-Axis Accelerator: Detects object acceleration
11. Seeeduino Lotus: Arduino Compatible Board with Grove Ports

Note: By default, Grove modules are connected to Seeeduino via PCB stamp holes. This means you don't need to use Grove cables to connect if not broken out.

Product description

For boards and shields, stacking is extremely important. By stacking boards and shields can be placed properly and extra work like soldering or wiring is kept at minimum. The new products compatible with Arduino UNO R3 platform is generally intented to be stacking-friendly. Shield Stacking Headers compatible with Arduino is an important tool used for that purpose.

• Pack of 5 sets
• Each set has 1x1*10p header, 2x1*8p header, 2x1*6p header, 1x2*3p header
• Plastic height is 8.5mm, pin length 11mm, pitch 2.54mm(0.1"), solid square pins
• Full compatible with Arduino UNO R3 & Leonardo shields

User questions & answers

Question:	Pack of 5 sets ? if each set has 1x1*10p header, 2x1*8p header, 2x1*6p header, 1x2*3p header, does that mean i would receive 5 times what's shown
Answer:	I get earlier than the date they give you much much earlier mine took about 1 week only
Question:	Are these headers made of ferrous metals? I want to use them with a compass
Answer:	If you buy a 2.5 inch SSD from the store it will fit, 100%. However, I took apart a slim external hdd because it was 2TB, thinking that it would fit. It states on the hdd itself that it’s 2.5 inches. But it doesn’t fit. I think it might be a mm too thick. Don’t know if that applies to internal 2.5 inch hdd's, but I know for a fact that 2.5 SSD’s fit.

Product description

433MHz RF Wireless Transmitter and Receiver Module Kit for Ar-duino Raspberry Pi



Transmitter:



Operating Voltage: 3.5-12VDC

Size: 19mm x 19mm

AM transfer rate: 4KB / S

Transmitting Power: 10mW

Amplitude Modulation: ASK or OOK

Launch Distance: 20-200 Metres (dependent on supply voltage)

Transfer Rate: <10Kbps

Emission frequency: 433M



Receiver:



Voltage: 5VDC

Current: 4mA

Frequency: 433mZ

Receiver Sensitivity: -103DBm



Package Included:



5 x Receiver module(433Mhz)

5 x Transmitter module (433MHz)

• VCC voltage module operating voltage and good power filtering.
• Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor.
• Launch distance 20-200 meters (different voltage, different results).
• Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source.
• Frequency used to receive, decode and oscillation resistor should match with the transmitter.

User questions & answers

Question:	how much does the Transmitter module weigh
Answer:	Hello, fan and radiator are included. Thank you!
Question:	Need receiver on a drone to complete simple circuit.How to use with small breadboards etc? Im new to Hardware
Answer:	I'm not using Lakka, but a web search suggests that is does in fact support safe shutdown.

• SEPERATABLE & DURABLE: These wires come in a set, which can be separated into single wire for various usages. Also, they are pretty durable even you separate them into single-wire form.
• PREMIUM QUALITY: We use high-end copper-clad aluminum & PVC to manufacture these high-quality cables. They can be reused if they did not get damaged. Just trust them and build your electronics.
• PERFECT SET FOR EASY USE: This Jump Wire Set includes three kinds of wires: 120 Pin Male to Female, 120 Pin Male to Male, and 120 Pin Female to Female. These 360 Pcs wires can meet your demands in electronic projects.
• PROPER QUANTITY & LENGTH: All kinds of jumper wires come in 120 Pcs wires for you to use. Besides, 20-cm length is very proper for simple electronic projects, and can provide the best performance.
• WHAT YOU GET: 3 Kinds of Multicolored Dupont Wires (40 Pin Male to Female x 3, 40 Pin Male to Male x 3, and 40 Pin Female to Female x 3). You can use them in different ways with different colors.

User questions & answers

Question:	What is the length
Answer:	no
Question:	Can these work on a raspberry pi breadboard
Answer:	Hello, the length of the hdmi cable is one meter. Thank you!
Question:	Do the jumper wires come with breadboards
Answer:	Hi, yes. It comes with 2 hdmi cables.
Question:	How many jumpers are included in this package?Is it the same as in the picture
Answer:	Yes, they are both 1 meter long microHDMI-to HDMI cables.

Product features

Use Them in Individual

If you need to use a single wire, you can easily to separate them into 1 wire, which is still super durable and can be used repeatedly if not being damaged.

3 Kinds of Wires

40 Pin Male to Female x 3

40 Pin Male to Male x 3

40 Pin Female to Female x 3

Total 360 Dupont Wires. Perfect for you to use in electronics

Size & Material

Length of the wires: 20 cm (7.87 in)

Material: Copper-clad Aluminum, PVC

Product description

Kit with Arduino-compatible boards for application development with Arduino MEGA, Arduino UNO

• MEGA R3 (high quality generic) USB cable, UNO R3 (high quality generic) USB cable, Plastic enclosure for MEGA, Plastic enclosure for UNO, WeMos WiFi board based on ESP8266 SoC , HC-05 Master Slave Bluetooth Module, Plastic box with cells (Component organizer), Prototype shield for UNO Mini-Breadboard, Shield MEGA para prototipos Mini-Protoboard, Big breadboard (830 points),
• Voltage regulator board (5V and 3.3V) with ON/OFF button for breadboard, Dupont Cables 10*Female-Female 10*Male-Female 10 Male-Male, Shield Multi-function, Shield LCD 16 chars x 2 lines, Shield LCD 2.4” inch with touch interfase, Single Relay module 5V, LM35 Temperature sensor, Tilt detection sensor, Infrared Phototransistor (Flame Sensor), Infrared LED, 2* Light sensor (Photoresistor),
• Multi-function Shield:, * 4-digit display with 8 segments, * Active Buzzer, * Multiturn potentiometer, * 3 buttons, * 4 LEDs, * Access to pins to do more!
• 2.4 inch LCD touch shield:, * 2.4-inch graphic display shield, * With socket for microSD memory to display images, * Resistive touch interface, * Includes stylus pen, * Compatible with UNO and MEGA

Product description

Description:

This kit contains 458pcs electronic component, suitable for Arduion, 3D Printer, Raspberry Pi, STM32 etc. project development and application, meets all kinds of function requirements.



Package Include:

1pcs Power Supply Module,WARNING: Pls. do not use the voltage higher than 9V

1pcs 830 tie-points Breadboard

65pcs Bread Board Jumper Wire

140pcs Solderless Jumper Wire

20pcs Female-to-male Dupont Wire

2pcs Pin header (40pin)

1pcs Precision Potentiometer

2pcs Photoresistor

1pcs Thermistor

5pcs Diode Rectifier (1N4007)

5pcs NPN Transistor (PN2222)

1pcs IC 4N35

1pcs IC 74HC595

1pcs Active Buzzer

1pcs Passive Buzzer

10pcs Button (small)

10pcs 22pf Ceramic Capacitor

10pcs 104 Ceramic Capacitor

5pcs Electrolytic Capacitor (10UF 50V)

5pcs Electrolytic Capacitor (100UF 50V)

10pcs White LED

10pcs Yellow LED

10pcs Blue LED

10pcs Green LED

10pcs Red LED

1pcs RGB LED

10pcs Resistor (10R)

10pcs Resistor (100R)

30pcs Resistor (220R)

10pcs Resistor (330R)

10pcs Resistor (1K)

10pcs Resistor (2K)

10pcs Resistor (5K1)

10pcs Resistor (10K)

10pcs Resistor (100K)

10pcs Resistor (1M)

• This kit contains power supply components for Arduino, Raspberry Pi that project based on breadboard.
• Power Adaptor: 12V 1A 12W, can supplying power for project stability.
• Breadboard: 830 tie-point MB-102 solderless breadboard, size 16.5x5.5x0.85cm.
• Power Module: MB-102 breadboard DC voltage-stabilized source module, compatible with 5V, 3.3V; Input Voltage: DC 6.5-12V or USB power supply, Output 700 ma (MAX), two way independent control, can switch 0V / 3.3V / 5V.
• Jumper: 65pcs colorful breadboard jumper, convenient to connect module.