14 best breadboard for raspberry pi 4

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fjgTR



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

  ...

(Download tutorial for details)

  ...

Chapter 26 WebIOPi & IOT

 Project 26.1 Remote LED

Chapter 27 Solder Circuit Board

 Project 27.1 Solder a Buzzer

 Project 27.2 Solder a Flowing Water Light

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 18 Infrared Motion Sensor

 Project 18.1 Sense LED

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 434-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 223 items for 57 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	are there any tutorials for how to connect everything?? Not looking for coding tutorials yet
Answer:	Dear customer, Thank you for your question. You can download tutorial first via link below: https://github.com/Freenove/Freenove_Ultimate_Starter_Kit_for_Raspberry_Pi/archive/master.zip If you have any concerns, please feel free to contact us via Freenove support email. Best Regards, Freenove Support Team
Question:	Issues with the i2c module:the instructions you give in the tutorial are outdated and not applicable to the rpi3 and python3 - any suggestions
Answer:	Dear customer, We have update our tutorial(i2c configure) and code(Python) for customers. Now all Python code can run on Python 2 and Python 3. Please download again. Thanks for your question. Kind Regards, Freenove
Question:	Does it work with raspberry pi
Answer:	Dear customer, Yes, we have tested all projects in our tutorial . This kit works well with Raspberry Pi 4. And if you have any concerns, we offer technical support. Sincerely, Freenove Support Team
Question:	Are three 74HC595's used in one project? I broke one since the pins were ripped by me pulling it out of the breadboard too hard
Answer:	Dear customer, Thank you for choosing Freenove. I am sorry for the inconvenience. No, there is no project using three this chips. There just is a project using two this chips. If you broke more chips, you can contact us at [email protected] We will send you a new one for free. So don't worry. Sincerely, Freenove Support Team

Product description

Please note this kit DOES NOT include Raspberry Pi.



11 Lessons:

1.Bit digital Tube Display

2.Water Light with 74HC595

3.Raspberry Pi Drive Active Buzzer 

4.Raspberry Pi Button Control LED

5.Raspberry Pi Works with DHT11 Temperature and Humidity Module

6.IR Remote with Raspberry Pi

7.Raspberry Pi with 1602 LCD Display

8.Raspberry Pi with Led Blinking

9.Raspberry Pi Drive Passive Buzzer

10.Raspberry Pi with RGB Module

11.Raspberry Pi Drive the Servo



Package Includes:

1x T-type GPIO Extension Board 

1x Power Supply Module

1x DHT11 Temperature & Humidity Sensor Module 

1x 1602 LCD module

1x Servo Motor 9G

1x Infrared Remote Controller

1x 74HC595

4x Diode Rectifier IN4001

2x 7-Segment Display

2x NPN Transistor BC547

2x PNP Transistor BC557

1x RGB LED

5x LED Red

5x LED Green

5x LED Yellow

5x LED White

1x Passive Buzzer

1x Active Buzzer

1x Potentiometer (10k)

1x IR Receiver

1x Switch

5x Button

4x Capacitor Ceramic 100nF

4x Capacitor Ceramic 10nF

65 xJumper Wire

1x 830 Breadboard

1x Female-to-Male Dupont Wire 20pin

1x GPIO Cable

1x 9V Battery Buckle

1x Blue RAB Holder

10 xResistance (1K,2K,5.1K,10K,100K,10R,100R,220R,330R,1M)

1x Raspberry Pi GPIO Reference Card

1x Resistor Card

1x Cross Screw Driver

4x M3*6+5 Screws

4x PWM2*6+5 Screws

4x PWM2*4+5 Screws

3x M2*4+3 Coppernuts

1x CD

• 【Complete Set for Raspberry Pi 】 - It is a complete set which is designed to help beginners to make DIY projects with the Raspberry Pi,supporting Raspberry Pi 4B.
• 【Perfect Starter kit for Stem Education 】 -This starter kit comes with DVD tutorial which is perfect choice for beginners to learn Raspberry Pi, electronics and program.
• 【Learn to Programming 】 - Python code and C code are provided for beginner learn to programming.
• 【11 Projects Provides 】 - This starter kit provides a record 11 projects with diverse functions allowing for a dynamic creative experience.
• 【Technical support 】 - We are always here to answer any questions.

User questions & answers

Question:	Do we have the tutorials for this product
Answer:	Yes, The MPG Z390 Gaming Pro Carbon motherboard supports Supports 2-Way NVIDIA SLI Technology.
Question:	do you have any documentation online for this product
Answer:	There's a version with wifi and a version without. This version does not have wifi. The one with wifi is https://smile.amazon.com/MSI-MPG-Z390-PRO-Motherboard/dp/B07HM753YR/ref=mp_s_a_1_5?keywords=Gaming+pro+carbon&qid=1551175283&s=gateway&sr=8-5
Question:	Where is this made
Answer:	The MPG Z390 GAMING PRO CARBON has a total of 7 fan connectors.

Product features

Module 1602 LCD

Infrared remote control

Additonal power module

T-type GPIO expandable card

Experiment with T-Type GPIO Expandable Card

The deck allows you to experiment more easily

Designed to study knowledge in Arduino domain. It's the easiest and most complete Raspberry Pi learning kit.

You could easily connect the sensor or build a circuit with T-type GPIO expandable board and platinum

This Raspberry Pi learning kit allows you to learn Arduino with your children, designed for adults but also for children.

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fj6AV



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

Chapter 2 Button & LED

 Project 2.1 Button & LED

 Project 2.2 MINI table lamp

  ...

(Download tutorial for details)

  ...

Chapter 22 WebIOPi & IOT

 Project 22.1 Remote LED

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 16 Stepping Motor

 Project 16.1 Stepping Motor

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 358-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 171 items for 47 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	how do i get the tutorials
Answer:	This thing actually has nothing to do with the Raspberry Pi. It's an electronics kit, but there is no computer within the kit. Just various electronic components.
Question:	What DC power supply is needed for the breadboard
Answer:	84 x 55 x 8 mm
Question:	Is the compatible with the boolean box raspberry pi model 3 ? looking for something to expanded students learning
Answer:	i found it on their website, ive been looking all day, heres the link, click on the product and the zip file has all of the datasheetshttp://www.elegoo.com/download/

Product description

Description:

The Raspberry Pi prototype hat breadboard can provide a good prototype development platform.

You can build your own circuit on this breadboard.

Combined with the function of the Raspberry Pi GPIO pin to achieve many different functions, you can build an electronic experiment environment.





Features:

Easy to assemble

Prototype breadboard

GPIO compatible

With write-protect ID EEPROM





Package Includes:

4 x RPi Prototype Hat Breadboard

8 x Screws

4 x Pin Header

4 x Hollow Copper Pillar

• Suitable for Raspberry Pi 4B / Raspberry Pi 3/2 Model B/ Raspberry Pi 1 Model B / Pi 1 Model A+.
• PCB Dimensions: 57mm x 66mm, Thickness: 1.5mm.
• To kick off the HAT party, we have this proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more.
• The holes are connected underneath with traces to mimic the solderless breadboards you're familiar. There's also long power strips for +3V, +5V and Ground connections to the Pi.
• Package Includes: 4x PCBs, 4x 2x20pin connectors, 1x Screw Set

User questions & answers

Question:	What size are the screws? i need a little longer screws to go though the mount i have for the pi. are they a #3 or metric m
Answer:	Yes as long as the Socket is LGA 1151

• Smraza Electronics Fun Kit - It has all consumable component are often used. Compatible with Arduino and Raspberry Pi, it can almost meet all your needs. Not included controller board.
• A Breadboard and Power Supply Module -Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes.
• With jumper wire and Male-female dupont wire to meet your project expetation.
• All parts components are in a sturdy and nice storage box which can help you keep the components neat after using.
• With Datasheet and Tutorial - We provide detailed instruction for you to begin your electronic projects, any questions, please contact our customer service.

User questions & answers

Question:	Can this be used to make led lights for a diy lamp
Answer:	It mimics their natural pheromones. Very natural for them.
Question:	Will this work with raspberry pi zero W
Answer:	A wall plug and a bottle of liquid
Question:	What should be the polarity for the dc adapter? Any example adapter
Answer:	Yes it has worked. It too five weeks but my rescue cat is doing well and socializing.
Question:	What is the voltage? assuming 5vdc
Answer:	Yes.

Product features

Compatibility with Official Arduino IDE, Raspberry Pi

Arduino is a convenient, flexible and easy to beginning open-source electronics platform. Arduino can sense the environment through various sensors, and feedback and affect the environment by controlling lights, motors and other devices.

Because it's easy to start, the manufacture of Arduino boards and software distribution by anyone is permitted. And we provide PDF tutorial to reference. Please download it on Technical Specification of Product information. Or view on instructions.

Note: This kit does NOT include the controller board and AC/DC adapter, you need to buy it separately.

Smraza Basic Starter Kit with More Than 200 PCS Components

This is a great add-on to arduino or raspberry pi, the kit contain 234 common components for you to start your first project.

Most of them are individually packed in plastic bags, and all components are bagged in a clear case for you to store the components after finishing the experiment.

With precision potentiometer, resistor, power supply module, jumper wire and F-M dupont wire and so on.

Learn Electronics and Programming with Smraza

Smraza basic starter Kit, an actual start kit for Arduino enthusiasts to learn knowledge about Arduino and electronics. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

The programming of Arduino is realized through the Arduino programming language (based on Wiring) and the Arduino development environment (based on Processing). This kit is also suitable for raspberry pi.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

Component List:

1pcs Power Supply Module

1pcs 65 Jumper Wire

1pcs Active Buzzer, 1pcs Passive Buzzer

1pcs Precision Potentiometer

1pcs IC 4N35, 1pcs IC 74HC595

1pcs Thermistor, 1pcs RGB LED

2pcs Photoresistor, 2pcs Pin header (40pin)

10pcs Button (small)

10pcs White LED, 10pcs Yellow LED, 10pcs Blue LED, 10pcs Green LED, 10pcs Red LED

10pcs Resistor (10R), 10pcs Resistor (100R), 10pcs Resistor (220R), 10pcs Resistor (330R), 10pcs Resistor (1K), 10pcs Resistor (2K), 10pcs Resistor (5K1), 10pcs Resistor (10K), 10pcs Resistor (100K), 10pcs Resistor (1M)

20pcs Female-to-male Dupont Wire

1pcs 400 tie-points Breadboard

5pcs Diode Rectifier (1N4007), 5pcs NPN Transistor (2N2222)

5pcs Electrolytic Capacitor (10UF 50V), 5pcs Electrolytic Capacitor (100UF 50V)

10pcs 22pf Ceramic Capacitor, 10pcs 104 Ceramic Capacitor

• Compatible with RPi 4B/3B+/3B/2B/B+/Zero/Zero W
• Suitable for Arduino Uno, Mega2560 development breadboards,for Education kit or DIY project.
• The TF card slot can be easy accessed and the same as power port, HDMI port.
• It is Portable,easy to move, carry, this ABS holder can be fixed on the table stably for your needs.
• Package Includes:1 x ABS experiment holder platform,2 x Acrylic washers,4 x Anti-slipper robber pads,1 x Screw pack for the holder(M2.0*6) ,1 x Screw Driver

• The Sunfounder breadboard kit fits perfectly for a Raspberry Pi 4B, 3B+, 3 Model B, 2 Model B and 1 Model B+ , an R3 or Mega 2560 for Arduino
• The high quality RAB Holder makes everything convenient and neat.Enlarge the fun when you fix the Raspberry Pi and boards for Arduino.
• This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails.
• Including T-shape GPIO Extension Board and Ribbon Cable, which are special for Raspberry Pi 4B, 3 Model B+, 3 Model B, 2 Model B, 1 Model B+
• Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs, ten 1kΩ resistors, a screwdriver, and some screws.

User questions & answers

Question:	Will it fit a Raspberry Pi Zero
Answer:	Yes. Go to the ADVANCED Mode in your BIOS, then get over to the AI TWEAKER tab, and in there you "should" see the AI OVERCLOCK TUNER, where you can set XMP mode. Once set, the board will adjust all the values automatically for you. Then you can save the BIOS changes and reset.
Question:	Do you have one for Beaglebone instead of Raspberry Pi
Answer:	This motherboard is only compatible with 10th gen intel processors LGA1200.
Question:	The desc. states that it fits a rasp 4b. my 4b does't fit. there is no screw 4 the center & full size sd does't allow it to fit in slot. anyone else
Answer:	Sometimes sellers will mis-categorize socket types on accident. For the Z490, it should be LGA 1200.
Question:	Does this come witb the screws for mounting
Answer:	Yes it does. But the CPU would need to be 11th Gen (which supports PCIe 4.0)

Product features

for Arduino Raspberry Pi Holder Breadboard Kit

Introduction

This RAB Holder Kit provides you all the necessary components for a simple experiment, including threads for easy screwing, slots for plugging wires, an RAB holder, nine LEDs, and ten 1K current-limiting resistors, thus you can start the experiment right away. With this kit, you can fix your board for Arduino, Raspberry Pi, and breadboard on the RAB Holder, free of careless short circuits on a metal desk or caused by some metal parts underneath. What’s more, it also comes with 65pcs jumper wires with different length in various colors, therefore, you can just plug them into the control board and breadboard to build circuits, no bothering about complicated soldering.

SPECIFICATIONS

200 x 135 mm (7.87 x 5.31 inch)

PACKAGE INCLUDES

1 x RAB Holder

1 x 830-Point Breadboard

65 x Jumper Wire

1 x 20cm FC40 40pin Flat Rainbow Ribbon Cable

10 x 1kΩ Resistor

1 x Screwdriver

1 x T-Extension

9 x LED (3 red, 3 yellow, and 3 green)

12 x Screws(4 x M3*6 screws ,4 x PWM2*6 screw, 4 x PWM2*4 screws)

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fj6Ag



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

Chapter 2 Button & LED

 Project 2.1 Button & LED

 Project 2.2 MINI table lamp

  ...

(Download tutorial for details)

  ...

Chapter 16 WebIOPi & IOT

 Project 16.1 Remote LED

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 13 I2C-LCD1602

 Project 13.1 LCD

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 285-page detailed tutorials (including basic elec285-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 164 items for 38 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	Do u need a raspberry pi board for this kit? I wanna get into learning about coding, ect.? Thanks
Answer:	Yes. It works the same as a genuine arduino.

Product description

Specification:

PCB size: 55mm x 65mm, thickness: 1.5mm



Package Includes:

4 x RPi Prototype Hat Breadboard

4 x Pin Header

16 x Hollow Copper Pillar

16x Screws M2.5x16mm

16 x M2.5 Nuts

• The breadboard can provide a good prototype development platform for Raspberry Pi, and you can build your own circuit on this breadboard and have enough room for more complex circuit designs
• Combining the functions of Raspberry Pi GPIO pins to achieve many different functions, you can build an electronic experiment environment
• Easy to assemble, prototype breadboard, compatible with GPIO, with write-protected ID EEPROM
• With high-quality material, gold plated finish prevents oxidation，all pads from the top to the bottom are plated with holes
• We strive to make our 100% meet your requirements, and do our best to satisfy you

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fj6Aa



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

Chapter 2 Button & LED

 Project 2.1 Button & LED

 Project 2.2 MINI table lamp

  ...

(Download tutorial for details)

  ...

Chapter 12 WebIOPi & IOT

 Project 12.1 Remote LED

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 9 I2C-LCD1602

 Project 9.1 LCD

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 3 Tetris Game

 App 3.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 209-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 151 items for 28 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

Product description

Specification:

Expansion Board:

PCB material: high quality FR-4 material

PCB layers: 2 layers

Pads: tin plated

Size: 66mm * 57mm * 1.6mm



Pin Connector:

Pin pitch: 2.54mm

Female Connector pitch: 2.54mm

Pin number: double row 2 * 20P

Pin length: 3mm/12mm



Copper Pillar:

Size: M2.5 11mm / 14mm



Screw:

Size: M2.5 * 5mm



Product list:

3 x Expansion Board

3 x Connector 2x20pin 12mm

3 x Connector 2x20pin 3mm

12 x Copper Pillar 11mm

12 x Copper Pillar 14mm

24 x Black Screw

• 【Compatibility】: Suitable for Raspberry Pi 4 Model B / Pi 3 Model B / Pi 2 Model B / Pi 2 Model B / Pi 1 Model A.
• 【Flexible Circuit Design】: There are many pads on the expansion board, and some of them are connected by internal wires just like breadboards. There are some pads that are not connected by wires, and you can freely design circuits on them.
• 【Internal Wiring】: The wires between the pads on the expansion board are are internal wiring, so contact with conductive objects will not cause a short circuit.
• 【Long Pin Connector】: It is additionally equipped with a 12mm long pin double row female connector for each expansion board. The expansion board can be soldered to the long pin double row connector, and long pins can also be directly inserted into the jumper wire connected to the GPIO.
• 【Easy to Install】: With copper pillars and screws, it is convenient to fix the expansion board.

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fjVYW



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

Chapter 2 Button & LED

 Project 2.1 Button & LED

 Project 2.2 MINI table lamp

  ...

(Download tutorial for details)

  ...

Chapter 25 WebIOPi & IOT

 Project 25.1 Remote LED

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 17 Matrix Keypad

 Project 17.1 Calculator

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 423-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 204 items for 53 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	Is the rfid reader in this kit compatible with the mifare classic 1k rfid chipset
Answer:	Made in China.
Question:	Does this come with a case
Answer:	Pin 3.5.6.9.10.11 of UNO can use PWM. The general Arduino PWM frequency is about 490Hz, Pins 5.6 of Uno and the similar board can up to 980Hz, Pin 3.11 of Leonardo can reach 980Hz.
Question:	Does the protection plan cover components that don't work
Answer:	Thanks for your support and purchasing Elegoo products. The discount will be removed when the product is out of stock. But you don't need to worried beacause the product will be in stock in next few days and the price will be still $18.Best regards,Elegoo Support Team
Question:	Will this kit work with Raspberry Pi
Answer:	It is basically a kit to make various electronic projects with the uno controller cpu board. I have made various controller projects with mine. It contains-lots of varying parts that I put together to try on the proto board then after working out the bugs move it into a fixed project. Lots of fun and has a practical side as in the proto parts can be reused until a finished function is done.

Product description

Product description:

Suitable for Raspberry pi 3B ,Raspberry pi 2 Model B 2B,Raspberry pi 1B+, Raspberry pi 1 A A+,Raspberry pi zero W, Raspberry pi zero and 3.5 inch LCD Panel.

1,The SPI mode of the display is extended, so that the fan on the shell can be installed easily, at the same time you can use the extra GPIO.

2, It is easy to connect the GPIOs Products those are not used on the screen.

3, T-type expansion board and breadboard makes the experiment more convenient

4, It solve the problem that we can not use GPIO.



Packing included:

1 pcs T-type expansion board

1 pcs 400 points breadboard

40 pin IDE male - female - male extension line

30 pcs Bread board line



NOTE: Raspberry Pi development board is not included.With the GPIO extention board, you can connect all version raspberry of the board to various sensors and electronic components.

T type GPIO board blue and red will be shipped randomly

• Essential kit specially designed for using the gpio pins of raspberry pi motherboard to plug 3.5inch LCD panel and other components at the same time.
• T-type expansion board and breadboard makes the experiment more convenient
• Comes with a 40 pin IDE male - female - male extension line and 30 pcs Bread board Jump Cables, 1 pcs T-type expansion board , 1 pcs 400 points Points MB102 breadboard
• With the GPIO extention board, you can connect all version raspberry of the board to various sensors and electronic components.
• Detailed tutorials including project introduction and source code CAN BE PROVIDED, let us know if you need it.

User questions & answers

Question:	Does it work with a Kano computer with Raspberry Pi
Answer:	Yes we have. Pls refer to the following link: https://mega.nz/#!bugkUSZI!H7narbMYp0HFww1ekUMH5HkpcMcIINKBkPJeLl9g5_0

• This 7 in 1 RAB Holder kit is designed by Kuman for the Raspberry Pi and for Arduino hobbyists, the holder is large enough for a Raspberry Pi 3B/ 2B/ 1B+/ Zero/ Zero W, for Arduino or Mega 2560, and a 400 hole or 830 hole Circuit Board breadboard(for Arduino rapsberrry pi motherboard and 400 breadboard are not included).
• Gift: GPIO 40 pin Table Card for wiring Pi and BCM codes for all RPI motherboard.
• Including RPi GPIO Breakout Expansion Board and Ribbon Cable, which are special for Raspberry Pi 3 Model B, 2 Model B, 1 Model B+ and zero/ zero W.
• This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails.
• Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs (three for each color), ten 1kΩ resistors, a screwdriver, and some screws.

User questions & answers

Question:	How are you supposed to tell the correct orientation for attaching the cable from the break-out board to the RPi
Answer:	Surprisingly yes. I was pleasantly surprised. This is a very handy mounting platform. Also came with screwdriver.
Question:	is this kit comes with Breadboard
Answer:	screw diameter is 2.5mm with a thread length of 6mm. Overall length is 7mm.
Question:	can it work with 3b
Answer:	Yes. link: https://mega.nz/#!bugkUSZI!H7narbMYp0HFww1ekUMH5HkpcMcIINKBkPJeLl9g5_0.