14 best breadboard for raspberry pi

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fjgTR



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

  ...

(Download tutorial for details)

  ...

Chapter 26 WebIOPi & IOT

 Project 26.1 Remote LED

Chapter 27 Solder Circuit Board

 Project 27.1 Solder a Buzzer

 Project 27.2 Solder a Flowing Water Light

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 18 Infrared Motion Sensor

 Project 18.1 Sense LED

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 434-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 223 items for 57 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	are there any tutorials for how to connect everything?? Not looking for coding tutorials yet
Answer:	Dear customer, Thank you for your question. You can download tutorial first via link below: https://github.com/Freenove/Freenove_Ultimate_Starter_Kit_for_Raspberry_Pi/archive/master.zip If you have any concerns, please feel free to contact us via Freenove support email. Best Regards, Freenove Support Team
Question:	Issues with the i2c module:the instructions you give in the tutorial are outdated and not applicable to the rpi3 and python3 - any suggestions
Answer:	Dear customer, We have update our tutorial(i2c configure) and code(Python) for customers. Now all Python code can run on Python 2 and Python 3. Please download again. Thanks for your question. Kind Regards, Freenove
Question:	Does it work with raspberry pi
Answer:	Dear customer, Yes, we have tested all projects in our tutorial . This kit works well with Raspberry Pi 4. And if you have any concerns, we offer technical support. Sincerely, Freenove Support Team
Question:	Are three 74HC595's used in one project? I broke one since the pins were ripped by me pulling it out of the breadboard too hard
Answer:	Dear customer, Thank you for choosing Freenove. I am sorry for the inconvenience. No, there is no project using three this chips. There just is a project using two this chips. If you broke more chips, you can contact us at [email protected] We will send you a new one for free. So don't worry. Sincerely, Freenove Support Team

• Highest Cost Components Kit: It comes with more than 400pcs sensors and components for fun and simple electronic projects.
• Safe and Secure Pakcage: Resistors/LED/Transistors and Integrated Circuits are individually packaged and labeled, and well-stored in a sturdy box
• The Breadboard Power Supply come with a USB Power Cables,which is hard to find.
• Datasheet and Tutorial are available to download from our official website or you can contact our customer service.
• Not including the controller board.

User questions & answers

Question:	What can I do with it
Answer:	Our Electronics Component Fun Kit is a set of components that can be used for various experiments, not limited to Arduino or Raspberry Pi.
Question:	What is the maximum current rating on the power supply module
Answer:	The Power Supply Module Maximum Output Current:
Question:	How many pieces are there in total
Answer:	It comes with more than 500pcs sensors and components for fun and simple electronic projects.
Question:	What are the voltage/amperage ratings for the LEDs included in the kit
Answer:	The voltage/amperage ratings are not marked on the LEDs. The only way to know would be to contact the manufacturer of the kit for further information. Sorry I wasn't more help.

Product features

The Breadboard Power Supply has two power modes:

1) M/M USB Power Cable（included in this kit）;

2) 9V 1A DC Adapter（Not included in this kit）.

Jumper Wires

Jumper wires can be used for pin extension of the experiment board, adding experimental items, and the like. It can be connected very securely to the pins, eliminating the need for soldering and allowing quick circuit testing.

Our kit includes 65pcs male to male jumper wires, 20pcs male to female dupont wires, and 140pcs solderless jumper wires. which are completely adequate for various experiments.

IC 74HC595

The 74HC595 consists of an 8−bit shift register and a storage register with three−state parallel outputs. It converts serial input into parallel output so that you can save IO ports of an MCU. The 74HC595 is widely used to indicate multipath LEDs and drive multi-bit segment displays. "Three-state" refers to the fact that you can set the output pins as either high, low or "high impedance." With data latching, the instant output will not be affected during the shifting; with data output, you can cascade 74HC595s more easily.

IC 4N35

The 4N35 is a 4-terminal universal optocoupler that blocks the electrical connection between the signal source and the receiver of the signal, which effectively blocks electrical connections and interference. Commonly used in signal isolation transmission, switching power supply feedback control and so on. Common circuits include TV power supply parts (remote control switch, voltage feedback control), switching power supply, electric vehicle charger and many other aspects.

Buzzer

An active buzzer will generate a tone using an internal oscillator, so all that is needed is a DC voltage. A passive buzzer requires an AC signal to make a sound. It is like an electromagnetic speaker, where a changing input signal produces the sound, rather than producing a tone automatically.

To identify them, if you apply a DC voltage to them and it buzzes, it's an active.As far as commands go if you want to control the pitch, you would need a passive buzzer.

PN2222 NPN Transistor

The PN2222 can be used as a switch that use a little current from the R3 digital output to control the much bigger current of the motor. Because the small DC motor is use more power than an R3 digital output can handle directly.

1N4007 Diode

1N4007 Diode is a device which allows current flow through only one direction. That is the current should always flow from the Anode to cathode. The cathode terminal can be identified by using a grey bar as shown in the picture above. For 1N4007 Diode, the maximum current carrying capacity is 1A it withstand peaks up to 30A. Hence we can use this in circuits that are designed for less than 1A. The reverse current is 5uA which is negligible.

Electrolytic Capacitor

Electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal.

Ceramic Capacitor

Ceramic capacitor uses a ceramic material as the dielectric. Ceramics were one of the first materials to be used in the production of capacitors, as it was a known insulator. Ceramic capacitors are usually made with very small capacitance values. Ceramic capacitors are also very small in size and have a low maximum rated voltage. They are not polarized, which means that they may be safely connected to an AC source. Ceramic capacitors have a great frequency response due to low parasitic effects such as resistance or inductance.

Product description

Arduino is an open-source hardware and software platform where users can create tremendous electronic projects using programming via Arduino IDE, which users need to download directly from Arduino.cc. Since Arduino is open source, ELEGOO got the chance to make the same UNO R3 board which is fully compatible with Arduino.



The Upgraded Electronic Fun Kit is used as an extension kit for ELEGOO UNO R3 board or MEGA 2560 board and if you dont have one you can buy one from our store.



Component listing:

1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V

1pcs 830 tie-points Breadboard

1pcs 65 Jumper Wire

140pcs Solderless Jumper Wire

20pcs Female-to-male Dupont Wire

2pcs Pin header (40pin)

1pcs Precision Potentiometer

2pcs Photoresistor

1pcs Thermistor

5pcs Diode Rectifier (1N4007)

5pcs NPN Transistor (PN2222)

1pcs IC 4N35

1pcs IC 74HC595

1pcs Active Buzzer

1pcs Passive Buzzer

10pcs Button (small)

10pcs 22pf Ceramic Capacitor

10pcs 104 Ceramic Capacitor

5pcs Electrolytic Capacitor (10UF 50V)

5pcs Electrolytic Capacitor (100UF 50V)

10pcs White LED

10pcs Yellow LED

10pcs Blue LED

10pcs Green LED

10pcs Red LED

1pcs RGB LED

10pcs Resistor (10R)

10pcs Resistor (100R)

30pcs Resistor (220R)

10pcs Resistor (330R)

10pcs Resistor (1K)

10pcs Resistor (2K)

10pcs Resistor (5K1)

10pcs Resistor (10K)

10pcs Resistor (100K)

10pcs Resistor (1M)

• The highest cost performance knit with more than 300Pcs components
• Datasheet is available to download from our official website or you can contact our customer service
• Better improvement from our customers' suggestion
• Great quality and packing in a paper box
• Not including the controller board

User questions & answers

Question:	What is the power supply module for
Answer:	It is used to plug into a breadboard to supply either 3 volts or 5 volts to the power rails. The rails are blue and red. blue being negative red being positive
Question:	Is this the same thing as the Raseberry pi
Answer:	This thing actually has nothing to do with the Raspberry Pi. It's an electronics kit, but there is no computer within the kit. Just various electronic components.
Question:	What are the dimensions of the breadboard
Answer:	84 x 55 x 8 mm
Question:	Where can I find datasheets for all the components
Answer:	i found it on their website, ive been looking all day, heres the link, click on the product and the zip file has all of the datasheetshttp://www.elegoo.com/download/

Product features

74HC595

At sometime or another you may run out of pins on your UNO board and need to extend it with shift registers. This example is based on the 74HC595. The datasheet refers to the 74HC595 as an "8-bit serial-in, serial or parallel-out shift register with output latches; 3-state." In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. You can link multiple registers together to extend your output even more.

4N35

The 4N35 is an optocoupler for general purpose application. It consists of gallium arsenide infrared LED and a silicon NPN phototransistor. When the input signal is applied to the LED in the input terminal, the LED lights up. After receiving the light signal, the light receiver then converts it into electrical signal and outputs the signal directly or after amplifying it into a standard digital level. Thus, the transition and transmission of electricity-light-electricity is completed. Since light is the media of the transmission, meaning the input terminal and the output one are isolated electrically, this process is also be known as electrical isolation.

PN2222 NPN Transistor

The small DC motor, is likely to use more power than an UNO digital output can handle directly. If we tried to connect the motor straight to an UNO pin, there is a good chance that it could damage the UNO. A small transistor like the PN2222 can be used as a switch that uses just a little current from the UNO digital output to control the much bigger current of the motor. The transistor has three leads. Most of the electricity flows from the Collector to the Emitter, but this will only happen if a small amount is flowing into the Base connection. This small current is supplied by the UNO digital output.

Electrolytic Capacitor

An electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. The benefit of large capacitance in electrolytic capacitors comes with several drawbacks as well. Among these drawbacks are large leakage currents, value tolerances, equivalent series resistance and a limited lifetime.

Ceramic Capacitor

A ceramic capacitor uses a ceramic material as the dielectric. Ceramics were one of the first materials to be used in the production of capacitors, as it was a known insulator. Ceramic capacitors are usually made with very small capacitance values. Ceramic capacitors are also very small in size and have a low maximum rated voltage. They are not polarized, which means that they may be safely connected to an AC source. Ceramic capacitors have a great frequency response due to low parasitic effects such as resistance or inductance.

1N4007 Diode

A diode is a device which allows current flow through only one direction. That is the current should always flow from the Anode to cathode. The cathode terminal can be identified by using a grey bar as shown in the picture above. For 1N4007 Diode, the maximum current carrying capacity is 1A it withstand peaks up to 30A. Hence we can use this in circuits that are designed for less than 1A. The reverse current is 5uA which is negligible. The power dissipation of this diode is 3W. Applications of Diode: ● Can be used to prevent reverse polarity problem ● Half Wave and Full Wave rectifiers ● Used as a protection device ● Current flow regulators

Product description

• The quality of connections is supper consistent.
• The contacts are perfectly aligning with the holes; NO power fluctuation across the boards;
• Wonderful selection of the breadboards which fit to various electronic DIY projects and electrical experiments, including Arduino
• Quality certified; Fit for 21-32 AWG (0.2 - 0.7MM) wire
• Retain perfectly the DIP switches, 7-segment, tactile switches, certain ICs, displays, or other devices even with leads shorter than 3.5mm

Components Features:

 

6 pcs 400 tie-points breadboard

300 tie-point (30 x 10) IC-circuit area plus 4 x 25 tie-point power buses

White ABS plastic body with black printed legend. Color legend on distribution strips. With self-adhesive tape on the back

With interlocking parts

• 100 % SATISFACTION GUARANTED ★ Consistent hole alignment; Easy Pin Insertion; Refund if you are not happy without any reason
• NO WORRIES ABOUT CIRCUIT FAILIER ★ Spend the better part of your time on Creativity and fun DIY rather than debugging the unknown frailer of the poor breadboards
• PIN HOLES ARE EXQUISITELY LINING UP ★ Without any intermittent connections; Holes are properly cut out;
• PERFECT SET FOR YOUR EXPERT PROTOTYPING ★ A great combination for your needs; Snap together easily in groups; Excellent for Arduino Proto Shield
• PACKAGE COMPONENT ★ 6 X 400 tie-points (3.3 x 2.16 x 0.31 Inch)

User questions & answers

Question:	Where is this manufactured
Answer:	You’re guess is as good as mine, and my guess is China. They do work fine though, and unfortunately I doubt you will find any made in the USA.
Question:	Is this a 10X30 Board
Answer:	They are as pictured. I don’t know what exactly you mean by 10x30. If you mean the holes, then yes it appears so.
Question:	How many watts can the board handle
Answer:	Not exactly, but I would say not many to be safe. Prototype the controls/timing and such for your project on the breadboard with lower wattages and then scale it up.
Question:	Amazon provides package dimensions which are usless unless you work in shipping/receiving. what are the product dimensions
Answer:	I am glad I’m not alone in thinking that. The dimensions are as follows. 54mm wide (without tabs), 56mm with tabs. 82.5mm tall without tabs, 83.7mm with tabs. 9.5mm deep.

Product description

We are professional factory on making all electronics components based on Arduino and Raspberry Pi. And we also have professional engineer team to offer you tutorials which you can start from beginning.We are always caring about each customer’s experience and must improve the product function details at your suggestion.



This Breadboard Prototyping Starter Kit has components you need to start with a good prototyping base for your circuits.



High quality breadboard Compatible. 100% compatible with Raspberry Pi



NOTE: Power Supply is not included, Raspberry Pi is NOT INCLUDED



This is the assembled version.



Package Contents:

1pcsRainbow Ribbon Cable

1X GPIO T TypeExpansion Board

1pcs 830 MB-102 Tie Points Solderless Breadboard

65X Jumper Cable Wires

10 X10 ohm Resistors

10 X 100 ohm Resistors

10 X 200ohm Resistors

10 X330ohm Resistors

10X 1Kohm Resistors

10X 2KohmResistors

10X 5KohmResistors

10X 10KohmResistors

10X 100KohmResistors

10X 1m ohmResistors

• This is a updated Assembled kuman starter kit for for Raspberry Pi 3 Model B/ 2 B/B+ / RPI 1 A A+Zero
• High quality Solderless Breadboard: 830 tie-points 2 independent power rail sets in total Adhesive backing Solid construction
• 65pcs Jumper cable wires Kits: Male to Male jumper wires; 65 pieces several lengths options; Makes wiring a cinch; Many colors; Very flexible
• The GPIO expansion board is in a fancy T-shape, which is not as compact, but is a little easier to read the labels
• Detailed tutorials including project introduction and source code CAN BE PROVIDED, let us know if you need it.

User questions & answers

Question:	In the picture the breadboard rows don't match the pin slots and the column labels are inverted. Is this the breadboard that is shipped with the kit
Answer:	You can add a touch screen and build an android auto system. Lots of info on it. Just google
Question:	I am trying to connect the ribben cable to my rpi 3b. should the cables go across the pi or away from the pi
Answer:	Hello, I contacted Raspberry.org and they suggested not to use the large heatsink that comes with these kits on the new tin covered Broadcom BCM2837B0 chip on the Raspberry Pi 3 ModelB+. Seems like that would be mentioned in the specs, but it is not mentioned at all, which led me to contact them directly. Enjoy and good luck!! ~mk
Question:	Does this fit the 3b+ model
Answer:	Not the standard desktop version of windows 10. But please look at Windows 10 "IoT Core". You'll find a download link for it on the official raspberrypi.org website.
Question:	Does this work with the pi zero
Answer:	Can it run on a blackberry and us this next gen bkackberry. Where’s the keyboard and can it run a modem for compuserve access?

• The Sunfounder breadboard kit fits perfectly for a Raspberry Pi 4B, 3B+, 3 Model B, 2 Model B and 1 Model B+ , an R3 or Mega 2560 for Arduino
• The high quality RAB Holder makes everything convenient and neat.Enlarge the fun when you fix the Raspberry Pi and boards for Arduino.
• This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails.
• Including T-shape GPIO Extension Board and Ribbon Cable, which are special for Raspberry Pi 4B, 3 Model B+, 3 Model B, 2 Model B, 1 Model B+
• Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs, ten 1kΩ resistors, a screwdriver, and some screws.

User questions & answers

Question:	Will it fit a Raspberry Pi Zero
Answer:	Yes. Go to the ADVANCED Mode in your BIOS, then get over to the AI TWEAKER tab, and in there you "should" see the AI OVERCLOCK TUNER, where you can set XMP mode. Once set, the board will adjust all the values automatically for you. Then you can save the BIOS changes and reset.
Question:	Do you have one for Beaglebone instead of Raspberry Pi
Answer:	This motherboard is only compatible with 10th gen intel processors LGA1200.
Question:	The desc. states that it fits a rasp 4b. my 4b does't fit. there is no screw 4 the center & full size sd does't allow it to fit in slot. anyone else
Answer:	Sometimes sellers will mis-categorize socket types on accident. For the Z490, it should be LGA 1200.
Question:	Does this come witb the screws for mounting
Answer:	Yes it does. But the CPU would need to be 11th Gen (which supports PCIe 4.0)

Product features

for Arduino Raspberry Pi Holder Breadboard Kit

Introduction

This RAB Holder Kit provides you all the necessary components for a simple experiment, including threads for easy screwing, slots for plugging wires, an RAB holder, nine LEDs, and ten 1K current-limiting resistors, thus you can start the experiment right away. With this kit, you can fix your board for Arduino, Raspberry Pi, and breadboard on the RAB Holder, free of careless short circuits on a metal desk or caused by some metal parts underneath. What’s more, it also comes with 65pcs jumper wires with different length in various colors, therefore, you can just plug them into the control board and breadboard to build circuits, no bothering about complicated soldering.

SPECIFICATIONS

200 x 135 mm (7.87 x 5.31 inch)

PACKAGE INCLUDES

1 x RAB Holder

1 x 830-Point Breadboard

65 x Jumper Wire

1 x 20cm FC40 40pin Flat Rainbow Ribbon Cable

10 x 1kΩ Resistor

1 x Screwdriver

1 x T-Extension

9 x LED (3 red, 3 yellow, and 3 green)

12 x Screws(4 x M3*6 screws ,4 x PWM2*6 screw, 4 x PWM2*4 screws)

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fj6AV



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

Chapter 2 Button & LED

 Project 2.1 Button & LED

 Project 2.2 MINI table lamp

  ...

(Download tutorial for details)

  ...

Chapter 22 WebIOPi & IOT

 Project 22.1 Remote LED

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 16 Stepping Motor

 Project 16.1 Stepping Motor

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 358-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 171 items for 47 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	how do i get the tutorials
Answer:	This thing actually has nothing to do with the Raspberry Pi. It's an electronics kit, but there is no computer within the kit. Just various electronic components.
Question:	What DC power supply is needed for the breadboard
Answer:	84 x 55 x 8 mm
Question:	Is the compatible with the boolean box raspberry pi model 3 ? looking for something to expanded students learning
Answer:	i found it on their website, ive been looking all day, heres the link, click on the product and the zip file has all of the datasheetshttp://www.elegoo.com/download/

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fj6Ag



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

Chapter 2 Button & LED

 Project 2.1 Button & LED

 Project 2.2 MINI table lamp

  ...

(Download tutorial for details)

  ...

Chapter 16 WebIOPi & IOT

 Project 16.1 Remote LED

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 13 I2C-LCD1602

 Project 13.1 LCD

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 285-page detailed tutorials (including basic elec285-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 164 items for 38 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	Do u need a raspberry pi board for this kit? I wanna get into learning about coding, ect.? Thanks
Answer:	Yes. It works the same as a genuine arduino.

Product description

Specification:

PCB size: 55mm x 65mm, thickness: 1.5mm



Package Includes:

4 x RPi Prototype Hat Breadboard

4 x Pin Header

16 x Hollow Copper Pillar

16x Screws M2.5x16mm

16 x M2.5 Nuts

• The breadboard can provide a good prototype development platform for Raspberry Pi, and you can build your own circuit on this breadboard and have enough room for more complex circuit designs
• Combining the functions of Raspberry Pi GPIO pins to achieve many different functions, you can build an electronic experiment environment
• Easy to assemble, prototype breadboard, compatible with GPIO, with write-protected ID EEPROM
• With high-quality material, gold plated finish prevents oxidation，all pads from the top to the bottom are plated with holes
• We strive to make our 100% meet your requirements, and do our best to satisfy you

Product description

CanaKit RaspbNote: Raspberry Pi board is not included.



An exclusive bundle from CanaKit to start creating fun electronic projects with your Raspberry Pi using the GPIO interface.



This board is fully assembled and therefore soldering is not required.



This kit includes:



- CanaKit GPIO to Breadboard Interface Board

- GPIO Ribbon Cable

- GPIO Quick Reference Cards

- Breadboard

- RGB LED

- 32 x Jumper Wires(M/M)

- 2 x Red LEDs

- 2 x Green LEDs

- 2 x Yellow LEDs

- 2 x Blue LEDs

- 2 x Push Button Switches

- 15 x Resistors





This product is compatible with any Raspberry Pi containing a 40 Pin GPIO connector such as the Raspberry Pi 3. erry Pi GPIO Breakout Board Bundle

• Includes CanaKit 40-Pin GPIO Breakout Board and Ribbon Cable
• Includes Breadboard and Jumper Wires (M/M)
• Includes RGB LED, 8 x LEDs (Blue/Red/Yellow/Green), 15 x Resistors, 2 x Push Button Switches, CanaKit General Guide for Beginners to Electronic Component
• Includes Quick Reference Card for reference to the GPIO pins
• Compatible with the Raspberry Pi 2 and Raspberry Pi 3

User questions & answers

Question:	Since the pins are the same as a rpi zero w, my hope is that this will work with a rpi zero w. can anyone confirm
Answer:	Just a converter from 240 to 110
Question:	Does this fit the model 3b
Answer:	This is a maker product. both his LT and Chrome book are more powerful and versatile than this device most likely. IT is not best suited for day to day Desktop productivity. If your child wants to learn how to program and interphase with DIY hardware projects there is nothing better for them. The community that supports the Rpi is amazing. Go to there page (https://www.raspberrypi.org/about/)and you will see that it is all about creating hardware-software projects. I make retro arcade systems and robotic projects and others as a hobby.
Question:	Does the "canakit raspberry pi gpio breakout board bundle" work with the new raspberry pi
Answer:	Simply put, no standard Raspberry Pi has a RTC. The new "Pi 4 Compute module" *will* have a RTC. ASSUMING you run the Pi on a network, the "NTP" service addresses accurate clock needs, by checking with NTP hosts and updating your clock to correct for periodic drift. If you run your Pi WITHOUT A NETWORK then it is more challenging to maintain time -- but you can either purchase a RTC module, OR a GPS module. Both of these will provide accurate time references to the Pi.
Question:	Curious as to why it is a 40-pin set and they show a 20-pin ribbon cable
Answer:	Mine responded with Hardware : BCM2835 Revision : c03112 Serial : xxxxxx Model : Raspberry Pi 4 Model B Rev 1.2 so the answer is yes

Product description

Product description:

Suitable for Raspberry pi 3B ,Raspberry pi 2 Model B 2B,Raspberry pi 1B+, Raspberry pi 1 A A+,Raspberry pi zero W, Raspberry pi zero and 3.5 inch LCD Panel.

1,The SPI mode of the display is extended, so that the fan on the shell can be installed easily, at the same time you can use the extra GPIO.

2, It is easy to connect the GPIOs Products those are not used on the screen.

3, T-type expansion board and breadboard makes the experiment more convenient

4, It solve the problem that we can not use GPIO.



Packing included:

1 pcs T-type expansion board

1 pcs 400 points breadboard

40 pin IDE male - female - male extension line

30 pcs Bread board line



NOTE: Raspberry Pi development board is not included.With the GPIO extention board, you can connect all version raspberry of the board to various sensors and electronic components.

T type GPIO board blue and red will be shipped randomly

• Essential kit specially designed for using the gpio pins of raspberry pi motherboard to plug 3.5inch LCD panel and other components at the same time.
• T-type expansion board and breadboard makes the experiment more convenient
• Comes with a 40 pin IDE male - female - male extension line and 30 pcs Bread board Jump Cables, 1 pcs T-type expansion board , 1 pcs 400 points Points MB102 breadboard
• With the GPIO extention board, you can connect all version raspberry of the board to various sensors and electronic components.
• Detailed tutorials including project introduction and source code CAN BE PROVIDED, let us know if you need it.

User questions & answers

Question:	Does it work with a Kano computer with Raspberry Pi
Answer:	Yes we have. Pls refer to the following link: https://mega.nz/#!bugkUSZI!H7narbMYp0HFww1ekUMH5HkpcMcIINKBkPJeLl9g5_0

Product description

Description:

The Raspberry Pi prototype hat breadboard can provide a good prototype development platform.

You can build your own circuit on this breadboard.

Combined with the function of the Raspberry Pi GPIO pin to achieve many different functions, you can build an electronic experiment environment.





Features:

Easy to assemble

Prototype breadboard

GPIO compatible

With write-protect ID EEPROM





Package Includes:

4 x RPi Prototype Hat Breadboard

8 x Screws

4 x Pin Header

4 x Hollow Copper Pillar

• Suitable for Raspberry Pi 4B / Raspberry Pi 3/2 Model B/ Raspberry Pi 1 Model B / Pi 1 Model A+.
• PCB Dimensions: 57mm x 66mm, Thickness: 1.5mm.
• To kick off the HAT party, we have this proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more.
• The holes are connected underneath with traces to mimic the solderless breadboards you're familiar. There's also long power strips for +3V, +5V and Ground connections to the Pi.
• Package Includes: 4x PCBs, 4x 2x20pin connectors, 1x Screw Set

User questions & answers

Question:	What size are the screws? i need a little longer screws to go though the mount i have for the pi. are they a #3 or metric m
Answer:	Yes as long as the Socket is LGA 1151

Product description

Please note this kit DOES NOT include Raspberry Pi.



11 Lessons:

1.Bit digital Tube Display

2.Water Light with 74HC595

3.Raspberry Pi Drive Active Buzzer 

4.Raspberry Pi Button Control LED

5.Raspberry Pi Works with DHT11 Temperature and Humidity Module

6.IR Remote with Raspberry Pi

7.Raspberry Pi with 1602 LCD Display

8.Raspberry Pi with Led Blinking

9.Raspberry Pi Drive Passive Buzzer

10.Raspberry Pi with RGB Module

11.Raspberry Pi Drive the Servo



Package Includes:

1x T-type GPIO Extension Board 

1x Power Supply Module

1x DHT11 Temperature & Humidity Sensor Module 

1x 1602 LCD module

1x Servo Motor 9G

1x Infrared Remote Controller

1x 74HC595

4x Diode Rectifier IN4001

2x 7-Segment Display

2x NPN Transistor BC547

2x PNP Transistor BC557

1x RGB LED

5x LED Red

5x LED Green

5x LED Yellow

5x LED White

1x Passive Buzzer

1x Active Buzzer

1x Potentiometer (10k)

1x IR Receiver

1x Switch

5x Button

4x Capacitor Ceramic 100nF

4x Capacitor Ceramic 10nF

65 xJumper Wire

1x 830 Breadboard

1x Female-to-Male Dupont Wire 20pin

1x GPIO Cable

1x 9V Battery Buckle

1x Blue RAB Holder

10 xResistance (1K,2K,5.1K,10K,100K,10R,100R,220R,330R,1M)

1x Raspberry Pi GPIO Reference Card

1x Resistor Card

1x Cross Screw Driver

4x M3*6+5 Screws

4x PWM2*6+5 Screws

4x PWM2*4+5 Screws

3x M2*4+3 Coppernuts

1x CD

• 【Complete Set for Raspberry Pi 】 - It is a complete set which is designed to help beginners to make DIY projects with the Raspberry Pi,supporting Raspberry Pi 4B.
• 【Perfect Starter kit for Stem Education 】 -This starter kit comes with DVD tutorial which is perfect choice for beginners to learn Raspberry Pi, electronics and program.
• 【Learn to Programming 】 - Python code and C code are provided for beginner learn to programming.
• 【11 Projects Provides 】 - This starter kit provides a record 11 projects with diverse functions allowing for a dynamic creative experience.
• 【Technical support 】 - We are always here to answer any questions.

User questions & answers

Question:	Do we have the tutorials for this product
Answer:	Yes, The MPG Z390 Gaming Pro Carbon motherboard supports Supports 2-Way NVIDIA SLI Technology.
Question:	do you have any documentation online for this product
Answer:	There's a version with wifi and a version without. This version does not have wifi. The one with wifi is https://smile.amazon.com/MSI-MPG-Z390-PRO-Motherboard/dp/B07HM753YR/ref=mp_s_a_1_5?keywords=Gaming+pro+carbon&qid=1551175283&s=gateway&sr=8-5
Question:	Where is this made
Answer:	The MPG Z390 GAMING PRO CARBON has a total of 7 fan connectors.

Product features

Module 1602 LCD

Infrared remote control

Additonal power module

T-type GPIO expandable card

Experiment with T-Type GPIO Expandable Card

The deck allows you to experiment more easily

Designed to study knowledge in Arduino domain. It's the easiest and most complete Raspberry Pi learning kit.

You could easily connect the sensor or build a circuit with T-type GPIO expandable board and platinum

This Raspberry Pi learning kit allows you to learn Arduino with your children, designed for adults but also for children.

• Smraza Electronics Fun Kit - It has all consumable component are often used. Compatible with Arduino and Raspberry Pi, it can almost meet all your needs. Not included controller board.
• A Breadboard and Power Supply Module -Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes.
• With jumper wire and Male-female dupont wire to meet your project expetation.
• All parts components are in a sturdy and nice storage box which can help you keep the components neat after using.
• With Datasheet and Tutorial - We provide detailed instruction for you to begin your electronic projects, any questions, please contact our customer service.

User questions & answers

Question:	Can this be used to make led lights for a diy lamp
Answer:	It mimics their natural pheromones. Very natural for them.
Question:	Will this work with raspberry pi zero W
Answer:	A wall plug and a bottle of liquid
Question:	What should be the polarity for the dc adapter? Any example adapter
Answer:	Yes it has worked. It too five weeks but my rescue cat is doing well and socializing.
Question:	What is the voltage? assuming 5vdc
Answer:	Yes.

Product features

Compatibility with Official Arduino IDE, Raspberry Pi

Arduino is a convenient, flexible and easy to beginning open-source electronics platform. Arduino can sense the environment through various sensors, and feedback and affect the environment by controlling lights, motors and other devices.

Because it's easy to start, the manufacture of Arduino boards and software distribution by anyone is permitted. And we provide PDF tutorial to reference. Please download it on Technical Specification of Product information. Or view on instructions.

Note: This kit does NOT include the controller board and AC/DC adapter, you need to buy it separately.

Smraza Basic Starter Kit with More Than 200 PCS Components

This is a great add-on to arduino or raspberry pi, the kit contain 234 common components for you to start your first project.

Most of them are individually packed in plastic bags, and all components are bagged in a clear case for you to store the components after finishing the experiment.

With precision potentiometer, resistor, power supply module, jumper wire and F-M dupont wire and so on.

Learn Electronics and Programming with Smraza

Smraza basic starter Kit, an actual start kit for Arduino enthusiasts to learn knowledge about Arduino and electronics. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

The programming of Arduino is realized through the Arduino programming language (based on Wiring) and the Arduino development environment (based on Processing). This kit is also suitable for raspberry pi.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

Component List:

1pcs Power Supply Module

1pcs 65 Jumper Wire

1pcs Active Buzzer, 1pcs Passive Buzzer

1pcs Precision Potentiometer

1pcs IC 4N35, 1pcs IC 74HC595

1pcs Thermistor, 1pcs RGB LED

2pcs Photoresistor, 2pcs Pin header (40pin)

10pcs Button (small)

10pcs White LED, 10pcs Yellow LED, 10pcs Blue LED, 10pcs Green LED, 10pcs Red LED

10pcs Resistor (10R), 10pcs Resistor (100R), 10pcs Resistor (220R), 10pcs Resistor (330R), 10pcs Resistor (1K), 10pcs Resistor (2K), 10pcs Resistor (5K1), 10pcs Resistor (10K), 10pcs Resistor (100K), 10pcs Resistor (1M)

20pcs Female-to-male Dupont Wire

1pcs 400 tie-points Breadboard

5pcs Diode Rectifier (1N4007), 5pcs NPN Transistor (2N2222)

5pcs Electrolytic Capacitor (10UF 50V), 5pcs Electrolytic Capacitor (100UF 50V)

10pcs 22pf Ceramic Capacitor, 10pcs 104 Ceramic Capacitor