13 best arduino starter pack

Product description

This kit walks you through the basics of Arduino and electronics in a hands-on way. You will be able to build 15 projects using components that let you control the physical world through different kinds of sensors and actuators. Comes with a 170 page project guide book. Includes over 100 components

• It’s a quick and easy way to get started with the learning of STEAM subjects at home, and it can be used to think critically, learn collaboratively, and solve problems.
• This kit walks you through the basics of Arduino and electronics in a hands-on way. No prior experience is required, as the kit introduces both coding and electronics through fun, engaging, and hands-on projects.
• The kit comes with a 170-page project guide book and includes over 100 components.
• You’ll be able to build 15 different projects using components that let you control the physical world with different kinds of sensors and actuators.
• Plenty of free activities and materials are available online, along with lots of inspirational tutorials and videos that mean you can continue using the kit in creative ways even after you’ve completed the projects.

User questions & answers

Question:	does this include a solderless breadboard? specs on breadboard
Answer:	Hello! Thanks for reaching out! Our cups are durable, plastic cups. The cups are more reinforced than regular plastic cups you would buy at a grocery store. If you have questions or concerns, don't hesitate to ask. We are more than happy to help! Thank you, Grown Man Games
Question:	does the beginner kit come with programming software
Answer:	Yes, these kits are reusable. Just rinse after use to make sure they are clean before you stack them. Also 4 extra cups are included!
Question:	Amazon says that this starter kit is frequently bought together with "Wall Adapter Power Supply - 9V DC 650mA". Do I need to buy this power supply
Answer:	The table is pretty durable and has an easy to wipe surface. I haven't had any issues with warping.Height seems good; normal table height. Make sure to extend the legs all the way.
Question:	Can I get a parts list of what is included in this kit
Answer:	Yes

Product description

Component listing: 1pcs UNO R3 Controller Board 1pcs LCD1602 Module ( with pin header) 1pcs Breadboard Expansion Board 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs Joystick Module 1pcs IR Receiver 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Ultrasonic Sensor 1pcs DHT11 Temperature and Humidity Module 1pcs 9V Battery with DC 1pcs 65 Jumper Wire 1pcs USB Cable 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Potentiometer 1pcs 5V Relay 1pcs Breadboard 1pcs Remote 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 2pcs Photo resistor 1pcs Thermistor 2pcs Diode Rectifier (1N4007) 2pcs NPN Transistor (PN2222) 1pcs IC 74HC595 120pcs Resistor 10pcs Female-to-male DuPont Wire.

• Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
• The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
• Lcd1602 module with pin header (not need to be soldered by yourself)
• This is the upgraded starter kits with power supply module, 9V battery with dc
• High quality kite with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.

User questions & answers

Question:	which charger i need
Answer:	This kit is easy to learn Arduino and very complete.
Question:	The CD the came with my kit was blank. Can anyone recommend a good tutorial for a complete novice
Answer:	Yes I program mine with A raspberry pi the zero-w to the pi 4 ,8 gig will work !!
Question:	What's the catch? It seems to good to be true
Answer:	It's definitely not too complicated as long as there's the interest, patience, and persistence.
Question:	Is the elegoo uno the same as an arduino uno or is it modified in any way
Answer:	Here is the link to download the latest version: https://www.elegoo.com/tutorial/Elegoo%20The%20Most%20Complete%20Starter%20Kit%20for%20MEGA%20V1.0.2017.10.31.zip

Product features

Compatibility with Official Arduino IDE, Software, Sendsors and Codes

Arduino is an open-source platform used for building electronics projects. Arduino consists of both a physical programmable circuit board (often referred to as a microcontroller) and a piece of software, or IDE (Integrated Development Environment) that runs on your computer, used to write and upload computer code to the physical board.

For the reason of open source, the manufacture of Arduino boards and software distribution by anyone is permitted. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

Elegoo is one of the manufacturer on the market, whose clone products are compatible with the official Arduinomicrocontroller boards, they can use the official Arduino software, sensors and codes.

Learn Electronics and Programming with ELEGOO

The UNO boards can be used as the brains behind almost any electronics project. UNO can interact with buttons, LEDs, motors, speakers, GPS units, cameras, the internet, and even your smart-phone or your TV! By connecting the UNO board with a personal computer via a USB cable and uploading programs to the board, users can create digital devices and interactive objects that can sense and control objects in the physical and digital world like robots or even honest fortune-telling machines.

For this Elegoo Super Starter Kit, we provide a 24-lesson tutorial, introducing the basic setting of the software IDE, the working principles of the sensors and the simple program to enable the UNO board to control the sensors.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

74HC595 and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

4 digit 7 segment display

7 segment displays consist of 7 LEDs, called segments, arranged in the shape of an “8”. Most 7-segment displays actually have 8 segments, with a dot on the right side of the digit that serves as a decimal point. When using 4-digit 7-segment display, the common anode or common cathode pin is used to control which digit is displayed. Even though there is only one digit working, the principle of Persistence of Vision enables you to see all numbers displayed because each the scanning speed is so fast that you hardly notice the intervals. By building the circuit and editing the program, users can make a simple display showing certain numbers, or more complexly, a count-up timer or a elecrical rolling dice.

Stepper Motor

Stepper motors are DC motors that move in discrete steps. They have multiple coils that are organized in groups called "phases". By energizing each phase in sequence, the motor will rotate, one step at a time.

With a computer controlled stepping you can achieve very precise positioning and/or speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.

the simplest way of interfacing a unipolar stepper motor to UNO board is to use a breakout

for ULN2003A transistor array chip, applying voltage to each of the coils in a specific sequence.

Product description

Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true component listing: 1pcs Mega 2560 Controller Board 1pcs USB Cable 1pcs Breadboard 1pcs 65 Jumper Wire 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Tilt Switch 1pcs Photo resistor 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs Button (small) 10pcs Resistor (10R) 10pcs Resistor (100R) 10pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 5pcs Female-to-male DuPont Wire.

• The MEGA2560 complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE
• Free pdf tutorial in the cd (more than 35 lessons)
• Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)
• Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc.
• We have always cared about the customer experience and improve the product function details

User questions & answers

Question:	would this kit be appropriate for adult or would it be to easy
Answer:	Hi there! We're always working to test new devices, but right now the app is only compatible with Android and iOS devices. For a full list, visit LEGO.build/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can this kit be programmed with the arduino software (ide) available on arduino's page
Answer:	Hi there! This LEGO® set includes 9 characters, 3 vehicles, and building instructions. It also has a movie stage with a swiveling camera stand, a double-sided backdrop, and arms to move the ships and characters. The app is free to download through Google Play or the Apple App Store. For a list of requirements and compatible devices, take a peek at LEGO.com/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can children younger than 15 use this or is it too complicated
Answer:	Hi there! The app is currently only available for Android and iOS smartphones, though our developers are always looking to try it on new devices, and a tablet version may be available in the future. A tablet won't fit in the holder included in the set, though with some creativity and extra parts, you may be able to modify it a bit. Kind regards, Emily LEGO® Customer Service
Question:	The instruction cd i got along with this kit is blank. i'm unable to access any of pdf, code or libraries. how can i download this
Answer:	This is not a mini lego set. This arrives in a big box. Buy from Amazon seller Acebeach for same day shipping and handling.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo MEGA 2560 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo MEGA 2560 starter kit. The most essential parts in this kit are MEGA 2560 controller board and expansion board, which is a perfect clone with excellent product finish Compatible with Arduino projects. Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using a Mega2560 board and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it!

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

Product description

This is the most complete kit for starters to learn programming for Arduino projects. It is very fun and easy to use. Kit is 100% compatible with all Arduino modules. The 63 parts are packaged in an attractive, convenient container. Component listing: 5pcs White LED 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs 22pf Ceramic Capacitor 5pcs 104 Ceramic Capacitor 2pcs Photo resistor 1pcs Thermistor 5pcs Diode Rectifier (1N4007) 2pcs Electrolytic Capacitor (10UF 50V) 2pcs Electrolytic Capacitor (100UF 50V) 5pcs NPN Transistor (PN2222) 5pcs NPN Transistor (S8050) 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 1pcs Sound Sensor Module 1pcs LCD1602 Module ( with pin header) 1pcs IC L293D 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs RTC Module 1pcs DHT11 Temperature and Humidity Module 2pcs Potentiometer 1pcs Rotary Encoder Module 1pcs Joystick Module 1pcs Keypad Module 1pcs 5V Relay 1pcs IR Receiver Module 1pcs UNO R3 Controller Board 1pcs Breadboard 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Prototype Expansion 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs HC-SR501 PIR Motion Sensor 1pcs Ultrasonic Sensor 1pcs GY-521 Module 1pcs 3V Servo Motor 1pcs MAX7219 Module 1pcs Remote 1pcs 9V 1A Power Supply 1pcs 65 Jumper Wire 1pcs Water Lever Sensor 1pcs USB Cable 1pcs 9V Battery with DC 1pcs RC522 RFID Module 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 20pcs Female-to-male DuPont Wire.

• More than 200 components, this is the most complete starter kit you will find. Great value starter kit with 63 kinds of electronic components.
• Has all the components you need and a free PDF tutorial (more than 30 lessons) to show you how to use them. All code to use the modules is included on the CD.
• All the modules come soldered so they are easy to wire up.
• Includes ELEGOO R3 controller board and USB cable, 100% compatible with Arduino IDE Official R3, Official kit.
• Kit comes packaged in compartmentalized case with a bonus box for small parts like LED’s, IC’s, buttons, diodes, etc.

User questions & answers

Question:	What type of LED lights are in this kit
Answer:	Used to design small circuits and small games. Not intended for lamps. Theese small diodes are not bright enough for lamps
Question:	My 15 yr old is into sound, motors and magnets and wants to take over the world. Is this the best kit out there
Answer:	The arduino has serial communication abilities that can be used to “connect” the devices and/ or let them exchange information. It may also be possible to use Bluetooth modules to let them communicate. Not exactly sure what this question is asking.
Question:	Is soldering required
Answer:	For this kit, the appropriate parameters for the adapter is：output 9V/1A DC Plug 5.5*2.1mm.
Question:	Is the elego uno the same as arduino uno? Is there any difference in the chips and the system
Answer:	Yes, our power supply module output is 5V, the access power is 9V/1A.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo UNO R3 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics1 to take their first steps on electronics journey.

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo UNO R3 starter kit. The most essential parts in this kit are UNO R3 controller board and expansion board, which is a perfect clone with excellent product finish compatible with Arduino projects.

Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using an UNO R3 and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

• The most economical kit comes with everything compatible with Arduino to starting programming for beginners .
• This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself).
• Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc.
• Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service.
• All of the Components and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you.

User questions & answers

Question:	what kinds of electronic projects can i build with this kit
Answer:	I've been in computers 40+ years; this is a great package to teach coding. I'm teaching high schools kids. Package, and also on the web, are great short simple examples. Only think I've added is a card with 4 relays. We are programming a model railroad; important to 'see' what your code is doing. Well spent $40. Great Christmas present for 15+ year olds.
Question:	Would the 9v 1a adapter come eu according to my shipping address
Answer:	Dear, Sorry, we are unable to provide different plug specifications according to the address. Currently, the plugs included in this kit are US-compliant.
Question:	What size are the resistors
Answer:	10 100 220 330 1k 2k 5k 10k 100k 1meg you get ten each of these. This is a great kit. only thing I added was four relays.
Question:	Can you use the arduino software with this
Answer:	Yes, it comes with an arduino UNO board. You just need to download and install the arduino IDE on your computer and you're good to go.

Product features

REXQualis Super Starter Kit help everyone easy-to-get started with programming and robotics.

• REXQualis Super Starter Kit include a large number of components and sensors, it suitable for everyone to learn electronics and programming. we provide a detailed tutorial, introducing the basic setting compatible with Arduino IDE, the working principles of the sensors and the simple program to enable the microcontroller board to control the sensors.
• For novice users, even if you don't have any electronics knowledge, we provide a detailed and easy-to-understand tutorials, just follow our tutorial and step by step, you will find that it is more fun than you ever expected.
• For advanced users, like lab engineers, teachers , students and makers, use it to build low cost scientific instruments, to prove chemistry and physics principles, or to get started with programming and robotics.
• It’s also a good choice and perfect gift for your family or kids who are obsessed with electronics, programming or robotics, so that you can study and grow together.

LCD1602 Display Module

In this project , you will learn how to connect LCD Display to microcontroller board and display what we type. In addition, with the Potentiometer we can control the brightness of the screen.

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

REXQualis LCD1602 Module come with pin header, not need to be soldered by yourself.Then you can easy to Lining up the display with the top of the breadboard helps to identify its pins.

Control Stepper Motor by IR

In this project, you will learn a fun and easy way to control a stepper motor from a distance using an IR remote control.

The 28BYJ-48 is a small 5 volt geared stepping motors which are apparently widely used to control things like automated blinds, A/C units. And it come with a ULN2003 stepper motor driver board, allows you to easily control the 28BYJ-48 stepper motor from a microcontroller.

The IR sensor is connected to the microcontroller board directly since it uses almost no power.When you are fully connected, you can control the stepping motor through IR remote.

DC Motor with L293D and Relay

In this project you will learn how to control a small DC motor by microcontroller board with using a L293D transistor and Relay.

L293D transistor is a very practical chip that can independently control two DC motors. In this experiment, just half of the chip is used. Since most pins on the right side of the chip are used to control the second motor, they will not be used here.

Relays are generally used to switch smaller currents in a control circuit and do not usually control power consuming devices except for small motors and Solenoids that draw low amps. Nonetheless, relays can "control" larger voltages and amperes by having an amplifying effect because a small voltage applied to a relays coil can result in a large voltage being switched by the contacts.

Component listing:

Product description

The Ultimate Starter kit with a detailed tutorial from Miuzei has enough components for you to start your own projects.

Code is based on the C/C++ programming language, all these projects are powered from the USB with our provided 9V 1A power supply.

Once you get started you will be able to design and build many more projects, you will only be limited by your imagination.

Enjoy it!

Package Inclued: 1x R3 Board

1x USB Cable

1x 9V 1 A power Supply

1x Breadboard Expansion Board

1x 4*4 Matrix Keyboard Module

1x 5V Relay

1x Touch Sensor

1x Fan Motor

1x Fan

1x 830 tie-points Breadboard

1x LCD1602 Module (with Pin header)

1x 4-digit 7-segment Display

1x 7-Segment Display

1x Servo Motor(SG90)

1x ULN2003 Stepper Motor Driver Board

1x Stepper Motor

1x Power Supply Module

1x Ultrasonic distance sensor

1x Joystick Module

1x IR Receiver Module

1x IR Remote Control

2x Diode Rectifier(1N4007)

2x 2N2222 Transistors

2x Potentiometer (10K)

1x IC 74HC595

10X 10 pcs Resistor( 1M, 10R, 100R, 220R, 330R, 100K, 1K, 2K, 5.1K,10K, )

5x LEDs (White, Yellow, Blue, Green, Red,RGB)

1x 20 Pin Male to Female Jumper Wires

1x 65 pcs Jumper Wire

1x Tilt Switch

5x Buttons (Small)

• 【More than 28 Lessons】 Free PDF tutorial or easy to visit it on the mega cloud drive;
• 【DIY More Projects with Fun】It’s a good way to learn programming language in projects for beginners or hobbyists;
• 【Soldered Components】 LCD1602, Ultrasonic distance sensor and Touch sensor modules with pin header, which don’t need to solder by yourself;
• 【Come with 9V 1A Power supply】 The all projects could finish by USB, it’s a complete kit for you;
• 【Lifetime Warranty】You Can Get Miuzei Friendly Customer Service, Lifetime Efficient Friendly Customer Service Support and 18- months No Reason to Return and Refund.

User questions & answers

Question:	In arudino ide, what is the setting to choose for the type? there is a long list of different types. which one is the correct one? thanks
Answer:	Hi, great question! The kit comes with tutorials (mini projects and instructions) to learn how to work all the parts plus links to websites and Youtube videos as well. There is a lot of information that can be found online easily and you will not run out of ideas should you decide to come up with your own projects.
Question:	What is the difference between the basic and the upgraded version
Answer:	Should be totally safe. Nothing toxic or flammable. Worst thing it Might have is a watch/hearing aid battery - totally fine on airlines.
Question:	Lesson13-eight leds and a shift register not working in the pdf the connection diagram and example picture do not correspond there are different
Answer:	Which Uno? I have the Mega and Uno3 working normally, the Nano is another different matter all together and that has not bee something I can use. Despite that the Mega and UnoR3 have worked without issue. You do need to install a driver for them. Did you read the PDF supplied on the USB drive inside the kit????? Getting started: INSTALL DRIVER: Go to https://sparks.gogo.co.nz/ch340.html and download the CH340G driver. This driver is required for your clone Nano, Uno and Mega boards to interface with the official Arduino IDE. Next, download the Arduino IDE, this is where you write all the code for your Monster:
Question:	Is the r3 board compatible with circuitpython
Answer:	Hi and thank you for the great question. It's good for ages 6 yrs and up. Will update information in the product details.

• Perfect choice for beginners to learn, electronics and program.
• This kit with tutorial user manual containing more than 20 lessons,code,Libraries, datasheets, and so on.
• 100% Compatible with program.
• Inlcude type motors and LCDs with servo motor, stepper motor and DC Motor; LCD 1602, LCD 4-bit 7-segment Display etc.
• LCD 1602 module with pin header (not need to be soldered by yourself)

User questions & answers

Question:	What is the name of the Arduino in this product and what is its name in the Arduino program
Answer:	They refuse to List them. And it doesnt even show them on the Box either
Question:	Does the board have wifi or bluetooth? If not is there a kit in the same price range that does have bluetooth or wifi
Answer:	No
Question:	Is this 100% compatible with arduino hardware and software
Answer:	No
Question:	Which charger do I need
Answer:	Butane, I have to click it a few times before it will light.

Product features

Super Starter Kit for R3 Project

LAFVIN Super Start Kit not only contains r3 control board,but alsoincludes LED diodes,resistors,LCD1602,RFID module,Sound moduleover than 50 kinds of components and sensors. Which meet your de-mands for your different projects either it is simple or complex.

100% Compatibility with Official Software

The R3 is a microcontroller board based on the ATmega328.

It has 14 digital input/output pins (of which 6 can be used as PWM

outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection,

a power jack, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller; simply

connect it to a computer with a USB cable or power it with a AC-to-DC

adapter or battery to get started.

Detail Tutorial help you to learn electronics and programming

Don’t be nervous if you are a beginner.Our tutorial contains detailed

wiring diagrams,codes,libraries.Just follow our tutorial and step by

step you will come to realize that learning electronics is interesting.

There is connection diagram and code for each project, making it

easy for you to learn.

It’s the best choice and nice gift for your friends,family and kids to

learning electronics and programming.

1602 LCD Display Module

This is great LCD display compatible with arduino.

With limited pin resources, your project will quickly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.

If you already have I2C devices in your project, this LCD module actually cost no more resources at all. The address can be set 0x2.

74HC595 and Segment Display

Common anode 7-segment display Each segment of the display consists of an LED. So when you use it, you also need use a current-limiting resistor.

Otherwise,LED will be burnt out. In this experiment,we use a common cathode display. As we mentioned above, for common cathode display, connect the common cathode (COM) to GND. When the anode level of a certain segment is high, the segment is on; when the anode level of a certain segment is low, the segment is off.

LED and 830-hole Breadboard

LEDs are included in many lighting industries, the industrial community is depending more and more on LEDs.

In this lesson, a simple yet interesting experiment will be conducted, using LEDs to create flowing LED lights. As the name implies, these flowing lights are made up of six LEDs in a row which successively light up and dim one after another like flowing water.

Product description

Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true. The economical and most basic electronic components kit for Arduino projects Component listing: 1pcs UNO R3 Controller Board 1pcs USB Cable 1pcs Breadboard 1pcs 65 Jumper Wire 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Tilt Switch 1pcs Photoresist or 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs Button (small) 10pcs Resistor (10R) 10pcs Resistor (100R) 10pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 5pcs Female-to-male DuPont Wire

• The cheapest and most basic electronic components kit for Arduino beginner
• Free PDF tutorial including project introduction and code will be provided, you can save a lot of time searching them.
• With the newest UNO R3 development board + USB Cable and all the basic components.
• Nice package in the box with clear listing and CD.
• 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO, Arduino kit.

User questions & answers

Question:	what pins can do PWM? Do they all have the same hz
Answer:	Data cables don't connect a psu to the SSD. PSU is power supply unit... Data cables connect from the Sata ports on the board to the Sata drives data ports. Your power supply should have the power connectors to connect to the appropriate thing on your drive.
Question:	What happened? yesterday, the price was
Answer:	this is the best overclocking board I have ever used. simple bios. great overclocking software from asus. rock solid on air or water.
Question:	What is this for
Answer:	The guy above is incorrect about one thing, the ROG and Prime both share the ability to establish a 3.1 to 20 pin connection to a front panel.
Question:	Can you code this with the arduino ide
Answer:	it doesn’t come with cash

• REXQualis complete starter kit base on Arduino UNO R3 comes with more than 200pcs components, 67 kinds of components and sensors module.
• LCD1602 Module，MPU-6050 Module and RC522 RFID Module come with pin header, Motors come with wires, not need to solder by yourself.
• Include High Quality Base Board base on Arduino UNO R3 and Sensors, 100% compatible with Arduino IDE.
• Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service.
• All of the Components and Integrated Circuits are individually packaged and labeled,including some nice small boxs to keep the widget such as LED, IC, buttons, diodes, etc

User questions & answers

Question:	What gauge are the wires that come with this kit
Answer:	9V / 1A
Question:	Does it ship with batteries included
Answer:	The Remote and Real Time Clock Module is come with CR2 batteries.
Question:	Cual es el funcionamiento de este producto
Answer:	Hello, is the program running on the Arduino ide through the arduino board, and the function is reflected through the connected module。
Question:	What is it
Answer:	This is an stating kit, you can work on this as a testing environment.

Product features

REXQualis Complete Starter Kit help everyone easy-to-get started with programming and robotics.

• REXQualis Complete Starter Kit include a large number of components and sensors, it suitable for everyone to learn electronics and programming. we provide a detailed tutorial, introducing the basic setting compatible with Arduino IDE, the working principles of the sensors and the simple program to enable the microcontroller board to control the sensors.
• For novice users, even if you don't have any electronics knowledge, we provide a detailed and easy-to-understand tutorials, just follow our tutorial and step by step, you will find that it is more fun than you ever expected.
• For advanced users, like lab engineers, teachers , students and makers, use it to build low cost scientific instruments, to prove chemistry and physics principles, or to get started with programming and robotics.
• It’s also a good choice and perfect gift for your family or kids who are obsessed with electronics, programming or robotics, so that you can study and grow together.

LCD1602 Display Module

In this project , you will learn how to connect LCD Display to microcontroller board and display what we type. In addition, with the Potentiometer we can control the brightness of the screen.

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

REXQualis LCD1602 Module come with pin header, not need to be soldered by yourself. Then you can easy to Lining up the display with the top of the breadboard helps to identify its pins.

Control Stepper Motor by IR

In this project, you will learn a fun and easy way to control a stepper motor from a distance using an IR remote control.

The 28BYJ-48 is a small 5 volt geared stepping motors which are apparently widely used to control things like automated blinds, A/C units. And it come with a ULN2003 stepper motor driver board, allows you to easily control the 28BYJ-48 stepper motor from a microcontroller.

The IR sensor is connected to the microcontroller board directly since it uses almost no power.When you are fully connected, you can control the stepping motor through IR remote.

Soil Moisture Sensor Module

In this project, you will understand how you can use the soil moisture sensor in your projects. The soil moisture sensor or the hygrometer is usually used to detect the humidity of the soil. So, it is perfect to build an automatic watering system or to monitor the soil moisture of your plants. The voltage that the sensor outputs changes accordingly to the water content in the soil.When the soil is:

• Wet: the output voltage decreases
• Dry: the output voltage increases

Component listing:

Product description

The Big Boss / Heavy Artillery / Colossal Monstrosity of all Arduino Kits. Largest Arduino kit on Earth with over 100 components - perfect for robotics and engineering labs to prepare for the 4th industrial revolution. Be on the cutting edge of Arduino robotics kits and join the DIY IoT revolution. The Colossus is online and ready to serve.

Parts Listhttps://bit.ly/2XeUBHD

Unpacking Video: https://youtu.be/-VhiyiEfDtg

• Advancing development of robotics technology w/ Earths Biggest Colossal Giant of Giants Super Most Advanced Starter Kit for Arduino. 100+ parts Includes 5 main boards: 100% Arduino IDE compatible Uno R3, Mega 2560, Nano V3, ESP8266 Node MCU & Uno R3 Wi-Fi Board, ESP32 Dual WiFi + Bluetooth Developer Board
• Build advanced wireless and IoT projects with the ESP8266 WiFi Transceiver, HC-05 Bluetooth module, 2x NRF24L01 Long and short range transceiver and also the 433Mhz wireless modules and the ESP32 dual WiFi + Bluetooth for latest wireless technology in Arduino
• 10 shields including the Mega Protoshield, CNC Shield, LCD Shield, Sensor Shield, Game Pad & SD Card shield and W5100 Ethernet Shield with added accessories like OV7670 camera, 2x Nema17 stepper motors, multiple LCDs, 30 sensors + Robot Car Chassis and motor to build your ultimate Arduino super robot experimental vehicle
• Free access to the GAR Dropbox Cloud + 16G USB flash drive which includes PDF guide files & tutorial and video links to help you learn programming all the components and get started quickly
• Effective technical/customer support from USA with free lifetime replacement guarantee on all parts – Equip your robotics and engineering labs and classrooms for the future. Comes in a 22-inch Husky 2-Level heavy duty tool box with organizing compartments. Please let us know about any improvements we can make to the Colossus Kit. Critical feedback is deeply appreciated

User questions & answers

Question:

will the provided lessons in the usb flashdrive make use of all of the components and sensors offered in this package

Answer:

Dear Customers, PDF tutorials is available for this mega2560 starter kit. Please email us when you receive the kit, and we will send you the instruction as soon as possible. Besides, if you have any issues when you doing the projects, welcome to connect us and our professional engineers will help you out too. We are always dedicated to improving and providing the best electronic parts for our clients. Regards Ardest Customer Service Team

Product description

Important Notice:

⭐Kits designed for Arduino or Raspberry Pi

⭐Few modules need to be soldered

⭐Tutorial:Guidance Manual,Demo Code,and Necessary Class Libraries.Download link label is pasted at the bottom of packaging box.Or contact us on Amazon,we will Reply on:

   ET: 21:00 PM - 5:30 AM(Second Day)

   PST: 18:00 PM - 2:30 AM(Second Day)



Tutorial Manual Catalog:

Module List

Module 1:0.96 inch OLED Screen

1. Introduction

2. Example(Work with Arduino)

2.1 Pin Map

2.2 Code For Arduino

Module 2:1602 Liquid Crystal Display Module

1. Introduction

2. Example(Work with Arduino)

2.1 Pin Map

2.2 Code For Arduino

Module 3:1-Channel Relay Module

1. Introduction

2. Example(Work with Arduino)

2.1 Pin Map

2.2 Code For Arduino

Module 4:DHT11 temperature and humidity sensor

1. Introduction

2. Example(Work with Arduino)

2.1 Pin Map

2.2 Code For Arduino

Module 5:HC-SR04 Ultrasonic sensor

1. Introduction

2. Example(Work with Arduino)

2.1 Pin Map

2.2 Code For Arduino

Module 6:8x8 Dot Matrix Display

1. Introduction

2. Example(Work with Arduino)

2.1 Pin Map

2.2 Code For Arduino

ect...



Class Library in Guidance Document:

Adafruit_GFX.zip

Adafruit_SSD1306.zip

LiquidCrystal_I2C-master.zip



Package List:

1 x 0.96 inch OLED Screen

1 x 1602 Liquid Crystal Display Module

1 x 1-Channel Relay Module

1 x DHT11 temperature and humidity sensor

1 x HC-SR04 Ultrasonic sensor

1 x 8x8 Dot Matrix Display

1 x JoyStick Module

1 x 4-digit Digital Tube

1 x TTP223B Touch sensor

1 x HC-SR501 Infrared sensor

1 x Soil Moisture Sensor

1 x Obstacle Avoidance Sensor

1 x SG90 9G Servo Motor

2 x Bread Board

20 x Diode(red)

30 x Resistance(220 1K 10K Ω)

20 x DuPont Cable(male to female)

• For Arduino Raspberry Pi module sensor starter kit.Good Feedback from our customers.Free English Tutorial:contains all modules parameter information,image instructions,wiring diagrams,libraries and sample code.Download link label is pasted at the bottom of packaging box
• 【New Module】【0.96” OLED】:Made of 128x64 individual Yellow Blue OLED pixels.SSD1306 Driver Chip,controlled by I2C only need 2 wires.【1602 LCD】:White Blue with adjustable Backlight,display 2x16 characters.With Adapter Board,only need 4 I/O ports can control it.【Touch Sensor】:Touch it turns on,release it turns off.【Obstacle Avoidance Module】:used in robot obstacle avoidance,line count,black white line tracking.【8x8 Red Dot Matrix Display】:used to display characters and graphics,simple to control
• 【1 Channel Relay Module】:Controlled by 5V digital output from microcontrolle,With power and relay action indicator.used as home appliance control.【PIR Motion Sensor】:Human body sensor lighting industrial automation and control, etc.【SG90 9G Servo Motor】:Applied to remote control helicopters, micro robot,and boats. All kind of R/C Toys and experiments for Arduino.【DHT11】:Digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor
• 【Soil Moisture Sensor】:Most sensitive to ambient humidity is generally used to detect moisture of soil.【JoyStick Module】:2-axis pushbutton rocker module by joystick potentiometer with (X, Y) 2 axis analog output, (Z) 1 button digital output.【Red LED Digital Tube】:Common Anode;Digital Display:4 Digit;4 Bit 7 Segment; 【Ultrasonic Distance Sensor】:Using IO trigger for at least 10us high level signal，When triggered it sends out a series of 40KHz ultrasonic pulses and receives echo from an object
• There are many companies selling some cheap Module kit which has confusing instruction, wrong parts picture, misleading circuit graph and non-workable sample code. To make things worse, those low quality kit often contains many old Module which have too many quality problems and are no longer supported by original manufacturers. Such kind of Module kit brings user nothing but waste of money and time

• REXQualis complete starter kit base on Arduino MEGA 2560 comes with more than 200pcs components, 67 kinds of components and sensors module.
• LCD1602 Module，MPU-6050 Module and RC522 RFID Module come with pin header, Motors come with wires, not need to solder by yourself.
• Include High Quality Base Board base on Arduino MEGA 2560 100% compatible with Arduino IED.
• Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service.
• All of the Components and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you.

User questions & answers

Question:	El tutorial viene eb ingles o español
Answer:	Good day "Amin", your question requires a lot more information for someone to answer. But let me at least give you some info that will guide you towards supplying more information so that I can help. You say that the IDE has a long list of TYPE's. Yes there are 16 of them. Therefore it appears that you are getting an "error" when you try to compile your sketch. Now without seeing your sketch, it is not possible to go any further. But this type of error is because the Controller does not know how to deal with the data that you have entered, and are asking it to act upon. The controller needs to make available the the amount of memory space to store your information and also where to store it, and how it will manipulate it, and therefore it needs to know what "TYPE" of data it is. Now without seeing your sketch , you are the only one who knows "what type of data" it is. Regards
Question:	El tutorial viene eb ingles o español
Answer:	The upgraded kit come with 9V 1A power supply, DC Motor, Breadboard expansion board, Keypad, Touch sensor, Relay module than basic kit.
Question:	does it come with raspberry pi
Answer:	I did not get a pdf with my set. Check online for the same project.
Question:	Does this kit come with an Arduino
Answer:	I don’t believe you can then again all Arduino boards are compatible With other microcontroller software I believe it depends on the operating platform windows 10, IOS, Leniux, etc I personally would look into break out boards or even a Eithernet shield. The r3 is designed for prototyping with the right drives and programming software I’m sure it’s worth digging deeper into

Product features

REXQualis Complete Starter Kit help everyone easy-to-get started with programming and robotics.

• REXQualis Complete Starter Kit include a large number of components and sensors, it suitable for everyone to learn electronics and programming. we provide a detailed tutorial, introducing the basic setting compatible with Arduino MEGA 2560, the working principles of the sensors and the simple program to enable the microcontroller board to control the sensors.
• For novice users, even if you don't have any electronics knowledge, we provide a detailed and easy-to-understand tutorials, just follow our tutorial and step by step, you will find that it is more fun than you ever expected.
• For advanced users, like lab engineers, teachers , students and makers, use it to build low cost scientific instruments, to prove chemistry and physics principles, or to get started with programming and robotics.
• It’s also a good choice and perfect gift for your family or kids who are obsessed with electronics, programming or robotics, so that you can study and grow together.

LCD1602 Display Module

In this project , you will learn how to connect LCD Display to microcontroller board and display what we type. In addition, with the Potentiometer we can control the brightness of the screen.

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

MQ-2 Gas Sensor Module

In this project, you will learn shows how to build a smoke detector that beeps when it detects flammable gas or smoke.

The MQ-2 smoke sensor is sensitive to smoke and to the following flammable gases.

The voltage of the gas sensor outputs changes accordingly to the smoke level that exists in the atmosphere. The sensor outputs a voltage that is proportional to the concentration of smoke.

Soil Moisture Sensor Module

In this project, you will understand how you can use the soil moisture sensor in your projects. The soil moisture sensor or the hygrometer is usually used to detect the humidity of the soil. So, it is perfect to build an automatic watering system or to monitor the soil moisture of your plants. The voltage that the sensor outputs changes accordingly to the water content in the soil.When the soil is:

• Wet: the output voltage decreases
• Dry: the output voltage increases

Component listing:

• Smraza Electronics Fun Kit - It has all consumable component are often used. Compatible with Arduino and Raspberry Pi, it can almost meet all your needs. Not included controller board.
• A Breadboard and Power Supply Module -Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes.
• With jumper wire and Male-female dupont wire to meet your project expetation.
• All parts components are in a sturdy and nice storage box which can help you keep the components neat after using.
• With Datasheet and Tutorial - We provide detailed instruction for you to begin your electronic projects, any questions, please contact our customer service.

User questions & answers

Question:	Can this be used to make led lights for a diy lamp
Answer:	It mimics their natural pheromones. Very natural for them.
Question:	Will this work with raspberry pi zero W
Answer:	A wall plug and a bottle of liquid
Question:	What should be the polarity for the dc adapter? Any example adapter
Answer:	Yes it has worked. It too five weeks but my rescue cat is doing well and socializing.
Question:	What is the voltage? assuming 5vdc
Answer:	Yes.

Product features

Compatibility with Official Arduino IDE, Raspberry Pi

Arduino is a convenient, flexible and easy to beginning open-source electronics platform. Arduino can sense the environment through various sensors, and feedback and affect the environment by controlling lights, motors and other devices.

Because it's easy to start, the manufacture of Arduino boards and software distribution by anyone is permitted. And we provide PDF tutorial to reference. Please download it on Technical Specification of Product information. Or view on instructions.

Note: This kit does NOT include the controller board and AC/DC adapter, you need to buy it separately.

Smraza Basic Starter Kit with More Than 200 PCS Components

This is a great add-on to arduino or raspberry pi, the kit contain 234 common components for you to start your first project.

Most of them are individually packed in plastic bags, and all components are bagged in a clear case for you to store the components after finishing the experiment.

With precision potentiometer, resistor, power supply module, jumper wire and F-M dupont wire and so on.

Learn Electronics and Programming with Smraza

Smraza basic starter Kit, an actual start kit for Arduino enthusiasts to learn knowledge about Arduino and electronics. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

The programming of Arduino is realized through the Arduino programming language (based on Wiring) and the Arduino development environment (based on Processing). This kit is also suitable for raspberry pi.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

Component List:

1pcs Power Supply Module

1pcs 65 Jumper Wire

1pcs Active Buzzer, 1pcs Passive Buzzer

1pcs Precision Potentiometer

1pcs IC 4N35, 1pcs IC 74HC595

1pcs Thermistor, 1pcs RGB LED

2pcs Photoresistor, 2pcs Pin header (40pin)

10pcs Button (small)

10pcs White LED, 10pcs Yellow LED, 10pcs Blue LED, 10pcs Green LED, 10pcs Red LED

10pcs Resistor (10R), 10pcs Resistor (100R), 10pcs Resistor (220R), 10pcs Resistor (330R), 10pcs Resistor (1K), 10pcs Resistor (2K), 10pcs Resistor (5K1), 10pcs Resistor (10K), 10pcs Resistor (100K), 10pcs Resistor (1M)

20pcs Female-to-male Dupont Wire

1pcs 400 tie-points Breadboard

5pcs Diode Rectifier (1N4007), 5pcs NPN Transistor (2N2222)

5pcs Electrolytic Capacitor (10UF 50V), 5pcs Electrolytic Capacitor (100UF 50V)

10pcs 22pf Ceramic Capacitor, 10pcs 104 Ceramic Capacitor