12 best arduino starter kits

Product description

Component listing: 1pcs UNO R3 Controller Board 1pcs LCD1602 Module ( with pin header) 1pcs Breadboard Expansion Board 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs Joystick Module 1pcs IR Receiver 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Ultrasonic Sensor 1pcs DHT11 Temperature and Humidity Module 1pcs 9V Battery with DC 1pcs 65 Jumper Wire 1pcs USB Cable 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Potentiometer 1pcs 5V Relay 1pcs Breadboard 1pcs Remote 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 2pcs Photo resistor 1pcs Thermistor 2pcs Diode Rectifier (1N4007) 2pcs NPN Transistor (PN2222) 1pcs IC 74HC595 120pcs Resistor 10pcs Female-to-male DuPont Wire.

• Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
• The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
• Lcd1602 module with pin header (not need to be soldered by yourself)
• This is the upgraded starter kits with power supply module, 9V battery with dc
• High quality kite with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.

User questions & answers

Question:	which charger i need
Answer:	This kit is easy to learn Arduino and very complete.
Question:	The CD the came with my kit was blank. Can anyone recommend a good tutorial for a complete novice
Answer:	Yes I program mine with A raspberry pi the zero-w to the pi 4 ,8 gig will work !!
Question:	What's the catch? It seems to good to be true
Answer:	It's definitely not too complicated as long as there's the interest, patience, and persistence.
Question:	Is the elegoo uno the same as an arduino uno or is it modified in any way
Answer:	Here is the link to download the latest version: https://www.elegoo.com/tutorial/Elegoo%20The%20Most%20Complete%20Starter%20Kit%20for%20MEGA%20V1.0.2017.10.31.zip

Product features

Compatibility with Official Arduino IDE, Software, Sendsors and Codes

Arduino is an open-source platform used for building electronics projects. Arduino consists of both a physical programmable circuit board (often referred to as a microcontroller) and a piece of software, or IDE (Integrated Development Environment) that runs on your computer, used to write and upload computer code to the physical board.

For the reason of open source, the manufacture of Arduino boards and software distribution by anyone is permitted. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

Elegoo is one of the manufacturer on the market, whose clone products are compatible with the official Arduinomicrocontroller boards, they can use the official Arduino software, sensors and codes.

Learn Electronics and Programming with ELEGOO

The UNO boards can be used as the brains behind almost any electronics project. UNO can interact with buttons, LEDs, motors, speakers, GPS units, cameras, the internet, and even your smart-phone or your TV! By connecting the UNO board with a personal computer via a USB cable and uploading programs to the board, users can create digital devices and interactive objects that can sense and control objects in the physical and digital world like robots or even honest fortune-telling machines.

For this Elegoo Super Starter Kit, we provide a 24-lesson tutorial, introducing the basic setting of the software IDE, the working principles of the sensors and the simple program to enable the UNO board to control the sensors.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

74HC595 and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

4 digit 7 segment display

7 segment displays consist of 7 LEDs, called segments, arranged in the shape of an “8”. Most 7-segment displays actually have 8 segments, with a dot on the right side of the digit that serves as a decimal point. When using 4-digit 7-segment display, the common anode or common cathode pin is used to control which digit is displayed. Even though there is only one digit working, the principle of Persistence of Vision enables you to see all numbers displayed because each the scanning speed is so fast that you hardly notice the intervals. By building the circuit and editing the program, users can make a simple display showing certain numbers, or more complexly, a count-up timer or a elecrical rolling dice.

Stepper Motor

Stepper motors are DC motors that move in discrete steps. They have multiple coils that are organized in groups called "phases". By energizing each phase in sequence, the motor will rotate, one step at a time.

With a computer controlled stepping you can achieve very precise positioning and/or speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.

the simplest way of interfacing a unipolar stepper motor to UNO board is to use a breakout

for ULN2003A transistor array chip, applying voltage to each of the coils in a specific sequence.

Product description

This kit walks you through the basics of Arduino and electronics in a hands-on way. You will be able to build 15 projects using components that let you control the physical world through different kinds of sensors and actuators. Comes with a 170 page project guide book. Includes over 100 components

• It’s a quick and easy way to get started with the learning of STEAM subjects at home, and it can be used to think critically, learn collaboratively, and solve problems.
• This kit walks you through the basics of Arduino and electronics in a hands-on way. No prior experience is required, as the kit introduces both coding and electronics through fun, engaging, and hands-on projects.
• The kit comes with a 170-page project guide book and includes over 100 components.
• You’ll be able to build 15 different projects using components that let you control the physical world with different kinds of sensors and actuators.
• Plenty of free activities and materials are available online, along with lots of inspirational tutorials and videos that mean you can continue using the kit in creative ways even after you’ve completed the projects.

User questions & answers

Question:	does this include a solderless breadboard? specs on breadboard
Answer:	Hello! Thanks for reaching out! Our cups are durable, plastic cups. The cups are more reinforced than regular plastic cups you would buy at a grocery store. If you have questions or concerns, don't hesitate to ask. We are more than happy to help! Thank you, Grown Man Games
Question:	does the beginner kit come with programming software
Answer:	Yes, these kits are reusable. Just rinse after use to make sure they are clean before you stack them. Also 4 extra cups are included!
Question:	Amazon says that this starter kit is frequently bought together with "Wall Adapter Power Supply - 9V DC 650mA". Do I need to buy this power supply
Answer:	The table is pretty durable and has an easy to wipe surface. I haven't had any issues with warping.Height seems good; normal table height. Make sure to extend the legs all the way.
Question:	Can I get a parts list of what is included in this kit
Answer:	Yes

Product description

Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true component listing: 1pcs Mega 2560 Controller Board 1pcs USB Cable 1pcs Breadboard 1pcs 65 Jumper Wire 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Tilt Switch 1pcs Photo resistor 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs Button (small) 10pcs Resistor (10R) 10pcs Resistor (100R) 10pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 5pcs Female-to-male DuPont Wire.

• The MEGA2560 complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE
• Free pdf tutorial in the cd (more than 35 lessons)
• Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)
• Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc.
• We have always cared about the customer experience and improve the product function details

User questions & answers

Question:	would this kit be appropriate for adult or would it be to easy
Answer:	Hi there! We're always working to test new devices, but right now the app is only compatible with Android and iOS devices. For a full list, visit LEGO.build/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can this kit be programmed with the arduino software (ide) available on arduino's page
Answer:	Hi there! This LEGO® set includes 9 characters, 3 vehicles, and building instructions. It also has a movie stage with a swiveling camera stand, a double-sided backdrop, and arms to move the ships and characters. The app is free to download through Google Play or the Apple App Store. For a list of requirements and compatible devices, take a peek at LEGO.com/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can children younger than 15 use this or is it too complicated
Answer:	Hi there! The app is currently only available for Android and iOS smartphones, though our developers are always looking to try it on new devices, and a tablet version may be available in the future. A tablet won't fit in the holder included in the set, though with some creativity and extra parts, you may be able to modify it a bit. Kind regards, Emily LEGO® Customer Service
Question:	The instruction cd i got along with this kit is blank. i'm unable to access any of pdf, code or libraries. how can i download this
Answer:	This is not a mini lego set. This arrives in a big box. Buy from Amazon seller Acebeach for same day shipping and handling.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo MEGA 2560 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo MEGA 2560 starter kit. The most essential parts in this kit are MEGA 2560 controller board and expansion board, which is a perfect clone with excellent product finish Compatible with Arduino projects. Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using a Mega2560 board and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it!

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

Product description

The Ultimate Starter kit with a detailed tutorial from Miuzei has enough components for you to start your own projects.

Code is based on the C/C++ programming language, all these projects are powered from the USB with our provided 9V 1A power supply.

Once you get started you will be able to design and build many more projects, you will only be limited by your imagination.

Enjoy it!

Package Inclued: 1x R3 Board

1x USB Cable

1x 9V 1 A power Supply

1x Breadboard Expansion Board

1x 4*4 Matrix Keyboard Module

1x 5V Relay

1x Touch Sensor

1x Fan Motor

1x Fan

1x 830 tie-points Breadboard

1x LCD1602 Module (with Pin header)

1x 4-digit 7-segment Display

1x 7-Segment Display

1x Servo Motor(SG90)

1x ULN2003 Stepper Motor Driver Board

1x Stepper Motor

1x Power Supply Module

1x Ultrasonic distance sensor

1x Joystick Module

1x IR Receiver Module

1x IR Remote Control

2x Diode Rectifier(1N4007)

2x 2N2222 Transistors

2x Potentiometer (10K)

1x IC 74HC595

10X 10 pcs Resistor( 1M, 10R, 100R, 220R, 330R, 100K, 1K, 2K, 5.1K,10K, )

5x LEDs (White, Yellow, Blue, Green, Red,RGB)

1x 20 Pin Male to Female Jumper Wires

1x 65 pcs Jumper Wire

1x Tilt Switch

5x Buttons (Small)

• 【More than 28 Lessons】 Free PDF tutorial or easy to visit it on the mega cloud drive;
• 【DIY More Projects with Fun】It’s a good way to learn programming language in projects for beginners or hobbyists;
• 【Soldered Components】 LCD1602, Ultrasonic distance sensor and Touch sensor modules with pin header, which don’t need to solder by yourself;
• 【Come with 9V 1A Power supply】 The all projects could finish by USB, it’s a complete kit for you;
• 【Lifetime Warranty】You Can Get Miuzei Friendly Customer Service, Lifetime Efficient Friendly Customer Service Support and 18- months No Reason to Return and Refund.

User questions & answers

Question:	In arudino ide, what is the setting to choose for the type? there is a long list of different types. which one is the correct one? thanks
Answer:	Hi, great question! The kit comes with tutorials (mini projects and instructions) to learn how to work all the parts plus links to websites and Youtube videos as well. There is a lot of information that can be found online easily and you will not run out of ideas should you decide to come up with your own projects.
Question:	What is the difference between the basic and the upgraded version
Answer:	Should be totally safe. Nothing toxic or flammable. Worst thing it Might have is a watch/hearing aid battery - totally fine on airlines.
Question:	Lesson13-eight leds and a shift register not working in the pdf the connection diagram and example picture do not correspond there are different
Answer:	Which Uno? I have the Mega and Uno3 working normally, the Nano is another different matter all together and that has not bee something I can use. Despite that the Mega and UnoR3 have worked without issue. You do need to install a driver for them. Did you read the PDF supplied on the USB drive inside the kit????? Getting started: INSTALL DRIVER: Go to https://sparks.gogo.co.nz/ch340.html and download the CH340G driver. This driver is required for your clone Nano, Uno and Mega boards to interface with the official Arduino IDE. Next, download the Arduino IDE, this is where you write all the code for your Monster:
Question:	Is the r3 board compatible with circuitpython
Answer:	Hi and thank you for the great question. It's good for ages 6 yrs and up. Will update information in the product details.

Product description

This is the most complete kit for starters to learn programming for Arduino projects. It is very fun and easy to use. Kit is 100% compatible with all Arduino modules. The 63 parts are packaged in an attractive, convenient container. Component listing: 5pcs White LED 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs 22pf Ceramic Capacitor 5pcs 104 Ceramic Capacitor 2pcs Photo resistor 1pcs Thermistor 5pcs Diode Rectifier (1N4007) 2pcs Electrolytic Capacitor (10UF 50V) 2pcs Electrolytic Capacitor (100UF 50V) 5pcs NPN Transistor (PN2222) 5pcs NPN Transistor (S8050) 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 1pcs Sound Sensor Module 1pcs LCD1602 Module ( with pin header) 1pcs IC L293D 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs RTC Module 1pcs DHT11 Temperature and Humidity Module 2pcs Potentiometer 1pcs Rotary Encoder Module 1pcs Joystick Module 1pcs Keypad Module 1pcs 5V Relay 1pcs IR Receiver Module 1pcs UNO R3 Controller Board 1pcs Breadboard 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Prototype Expansion 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs HC-SR501 PIR Motion Sensor 1pcs Ultrasonic Sensor 1pcs GY-521 Module 1pcs 3V Servo Motor 1pcs MAX7219 Module 1pcs Remote 1pcs 9V 1A Power Supply 1pcs 65 Jumper Wire 1pcs Water Lever Sensor 1pcs USB Cable 1pcs 9V Battery with DC 1pcs RC522 RFID Module 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 20pcs Female-to-male DuPont Wire.

• More than 200 components, this is the most complete starter kit you will find. Great value starter kit with 63 kinds of electronic components.
• Has all the components you need and a free PDF tutorial (more than 30 lessons) to show you how to use them. All code to use the modules is included on the CD.
• All the modules come soldered so they are easy to wire up.
• Includes ELEGOO R3 controller board and USB cable, 100% compatible with Arduino IDE Official R3, Official kit.
• Kit comes packaged in compartmentalized case with a bonus box for small parts like LED’s, IC’s, buttons, diodes, etc.

User questions & answers

Question:	What type of LED lights are in this kit
Answer:	Used to design small circuits and small games. Not intended for lamps. Theese small diodes are not bright enough for lamps
Question:	My 15 yr old is into sound, motors and magnets and wants to take over the world. Is this the best kit out there
Answer:	The arduino has serial communication abilities that can be used to “connect” the devices and/ or let them exchange information. It may also be possible to use Bluetooth modules to let them communicate. Not exactly sure what this question is asking.
Question:	Is soldering required
Answer:	For this kit, the appropriate parameters for the adapter is：output 9V/1A DC Plug 5.5*2.1mm.
Question:	Is the elego uno the same as arduino uno? Is there any difference in the chips and the system
Answer:	Yes, our power supply module output is 5V, the access power is 9V/1A.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo UNO R3 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics1 to take their first steps on electronics journey.

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo UNO R3 starter kit. The most essential parts in this kit are UNO R3 controller board and expansion board, which is a perfect clone with excellent product finish compatible with Arduino projects.

Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using an UNO R3 and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

Product description

This Exclusive Arduino Deluxe Bundle includes everything you need to get started with Arduino - Including the only Official Starter Kit from Arduino (includes the Arduino Uno Revision 3 board), MAKE Magazine's "Getting Started with Arduino: The Open Source Electronics Prototyping Platform" and Speed Kits handy PIN-OUT Reference Chart for the Uno R3. No need to shop around for breadboards, sensors, LEDS, etc. This kit has it all and is designed to take you from Novice to Expert providing hours of instruction and a multitude of projects.



Just a few of the projects you can build using the parts and instructions included in this kit:



+ SPACESHIP INTERFACE design to control panel for your startship

+ KEYBOARD INSTRUMENT play music and make some noise with this keyboard

+ KNOCK LOCK tap out the secret code to open the door

+ ?TOUCHY-FEEL LAMP a lamp that responds to your touch

+ HACKING BUTTONS create a master control for all your devices!

+ LOVE-O-METER measure how hot-blooded you are

+ CRYSTAL BALL a mystical tour to answer all your tough question

+ Many, Many More



What's in the Box: The Official Arduino Starter Kit from Arduino, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback - December 28, 2014, Speed Kits Uno R3 PIN-OUT Chart

• Includes The Only Official Arduino Starter Kit From Arduino, The Best Selling Book From Make Magazine: Getting Started with Arduino: The Open Source Electronics Prototyping Platform and a Handy Uno R3 PIN-OUT Chart from Speed Kits
• Includes Book, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback
• Includes components for 15 projects
• Includes Arduino Uno R3 And Exclusive Speed-Kits Arduino PIN OUT Quick Reference Chart
• Includes a total of over 200 electronic parts and components

User questions & answers

Question:	List of all the parts
Answer:	Here's the parts list.... I highly recommend this kit if your just starting out with Arduino!The Arduino Starter Kit contains:1 x Arduino Projects Book1 x Arduino UNO Rev 3 microcontroller1 x USB cable1 x Breadboard1 x Easy-to-assemble wooden base1 x 9V battery snap70 x Solid core jumper wires2 x Stranded jumper wires6 x Photoresistors3 x Potentiometers (10K ohm)10 x Push buttons1 x Temperature sensor1 x Tilt sensor1 x Alphanumeric LCD (16x2 character display)1 x Bright white LED1 x Multicolor RGB LED8 x Red LEDs8 x Green LEDs8 x Yellow LEDs3 x Blue LEDs1 x Small DC motor (6/9V)1 x Small servo motor1 x Piezo capsule1 x H-bridge motor driver2 x Optocouplers5 x Transisitors2 x Mosfet transistors5 x 100nF capacitors3 x 100uF capacitors5 x 100pF capacitors5 x Diodes3 x Transparent gels (red, green, blue)1 x 40 pin male header strip20 x 220 ohm resistors5 x 560 ohm resistors5 x 1K ohm resistors5 x 4.7K ohm resistors10 x 10K ohm resistors5 x 1M ohm resistors5 x 10M ohm resistors
Question:	Can you recommend a case to keep all the parts in
Answer:	Hello! Thank you for reaching out! The dimensions of our mini beer pong table are 22" x 7.9" x 0.75" inches. If you have questions or concerns, don't hesitate to ask. We are more than happy to help! Thank you, Grown Man Games
Question:	Is there any programming and if there is not is there another official starter kit for it on amazon
Answer:	Hello - This table is designed for Beer Pong use and pong balls can bounce off the table.
Question:	What is the difference between this item and the other starter kit that sells for
Answer:	Yes

• Perfect choice for beginners to learn, electronics and program.
• This kit with tutorial user manual containing more than 20 lessons,code,Libraries, datasheets, and so on.
• 100% Compatible with program.
• Inlcude type motors and LCDs with servo motor, stepper motor and DC Motor; LCD 1602, LCD 4-bit 7-segment Display etc.
• LCD 1602 module with pin header (not need to be soldered by yourself)

User questions & answers

Question:	What is the name of the Arduino in this product and what is its name in the Arduino program
Answer:	They refuse to List them. And it doesnt even show them on the Box either
Question:	Does the board have wifi or bluetooth? If not is there a kit in the same price range that does have bluetooth or wifi
Answer:	No
Question:	Is this 100% compatible with arduino hardware and software
Answer:	No
Question:	Which charger do I need
Answer:	Butane, I have to click it a few times before it will light.

Product features

Super Starter Kit for R3 Project

LAFVIN Super Start Kit not only contains r3 control board,but alsoincludes LED diodes,resistors,LCD1602,RFID module,Sound moduleover than 50 kinds of components and sensors. Which meet your de-mands for your different projects either it is simple or complex.

100% Compatibility with Official Software

The R3 is a microcontroller board based on the ATmega328.

It has 14 digital input/output pins (of which 6 can be used as PWM

outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection,

a power jack, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller; simply

connect it to a computer with a USB cable or power it with a AC-to-DC

adapter or battery to get started.

Detail Tutorial help you to learn electronics and programming

Don’t be nervous if you are a beginner.Our tutorial contains detailed

wiring diagrams,codes,libraries.Just follow our tutorial and step by

step you will come to realize that learning electronics is interesting.

There is connection diagram and code for each project, making it

easy for you to learn.

It’s the best choice and nice gift for your friends,family and kids to

learning electronics and programming.

1602 LCD Display Module

This is great LCD display compatible with arduino.

With limited pin resources, your project will quickly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.

If you already have I2C devices in your project, this LCD module actually cost no more resources at all. The address can be set 0x2.

74HC595 and Segment Display

Common anode 7-segment display Each segment of the display consists of an LED. So when you use it, you also need use a current-limiting resistor.

Otherwise,LED will be burnt out. In this experiment,we use a common cathode display. As we mentioned above, for common cathode display, connect the common cathode (COM) to GND. When the anode level of a certain segment is high, the segment is on; when the anode level of a certain segment is low, the segment is off.

LED and 830-hole Breadboard

LEDs are included in many lighting industries, the industrial community is depending more and more on LEDs.

In this lesson, a simple yet interesting experiment will be conducted, using LEDs to create flowing LED lights. As the name implies, these flowing lights are made up of six LEDs in a row which successively light up and dim one after another like flowing water.

Product description

The Big Boss / Heavy Artillery / Colossal Monstrosity of all Arduino Kits. Largest Arduino kit on Earth with over 100 components - perfect for robotics and engineering labs to prepare for the 4th industrial revolution. Be on the cutting edge of Arduino robotics kits and join the DIY IoT revolution. The Colossus is online and ready to serve.

Parts Listhttps://bit.ly/2XeUBHD

Unpacking Video: https://youtu.be/-VhiyiEfDtg

• Advancing development of robotics technology w/ Earths Biggest Colossal Giant of Giants Super Most Advanced Starter Kit for Arduino. 100+ parts Includes 5 main boards: 100% Arduino IDE compatible Uno R3, Mega 2560, Nano V3, ESP8266 Node MCU & Uno R3 Wi-Fi Board, ESP32 Dual WiFi + Bluetooth Developer Board
• Build advanced wireless and IoT projects with the ESP8266 WiFi Transceiver, HC-05 Bluetooth module, 2x NRF24L01 Long and short range transceiver and also the 433Mhz wireless modules and the ESP32 dual WiFi + Bluetooth for latest wireless technology in Arduino
• 10 shields including the Mega Protoshield, CNC Shield, LCD Shield, Sensor Shield, Game Pad & SD Card shield and W5100 Ethernet Shield with added accessories like OV7670 camera, 2x Nema17 stepper motors, multiple LCDs, 30 sensors + Robot Car Chassis and motor to build your ultimate Arduino super robot experimental vehicle
• Free access to the GAR Dropbox Cloud + 16G USB flash drive which includes PDF guide files & tutorial and video links to help you learn programming all the components and get started quickly
• Effective technical/customer support from USA with free lifetime replacement guarantee on all parts – Equip your robotics and engineering labs and classrooms for the future. Comes in a 22-inch Husky 2-Level heavy duty tool box with organizing compartments. Please let us know about any improvements we can make to the Colossus Kit. Critical feedback is deeply appreciated

User questions & answers

Question:

will the provided lessons in the usb flashdrive make use of all of the components and sensors offered in this package

Answer:

Dear Customers, PDF tutorials is available for this mega2560 starter kit. Please email us when you receive the kit, and we will send you the instruction as soon as possible. Besides, if you have any issues when you doing the projects, welcome to connect us and our professional engineers will help you out too. We are always dedicated to improving and providing the best electronic parts for our clients. Regards Ardest Customer Service Team

Product description

Earth's 2nd Biggest Starter Kit for Arduino.

Monster package with everything you need to get serious with programming electronics and exploring the Arduino system.

Monster Includes:

Arduino-compatible UNO R3, MEGA 2560, NANO V3

ESP32

ESP8266 NodeMCU

HC05 Bluetooth Module

ESP8266 Wifi Module

W5100 Ethernet Shield

2x NRF24L01 Wireless Transceiver Module

RC522 RFID Kit

IR Remote Kit

Protoshield

4x4 Keypad

1602 LCD w/ i2C Backpack

Ultrasonic Range Sensor

Sound Sensor

PIR Motion Sensor

Impact Switch Switch Sensor

Photo Interrupter Sensor

GY68 Barometric Pressure Sensor

Line Tracking Sensor

IR Flame Sensor

Hall Effect Sensor

DHT11 Temperature & Humidity Sensor

Vibration Sensor

IR Obstacle Avoidance Sensor

MQ3 Alcohol Sensor

MQ9 Combustible Gas Sensor

Soil Moisture Sensor

Rain Level Sensor

GY521 3-Axis Gyro & Accelerometer Module

ISD1820 Voice Recording Module

DS3231 Real Time Clock Module

Rotary Encoder Module

Laser Diode Module

1 Digit 7 Segment LED Display

4 Digit 7 Segment LED Display

MAX7219 8x8 LED Matrix Display

5V DC Hobby Motor

5g Servo

5V DC Stepper Motor + ULN2003 Stepper Motor Driver

9V 1A Power Supply

5V 1-Channel Relay Module

USB Charger Doctor

Piezo Buzzer

700-Point Breadboard

PS2 Joystick

Shift Register

L239D Motor Driver

NPN Transistor

Thermistor

9V Battery Connector

4G USB Drive

2x Photoresistor

2x Ceramic Disk Capacitor

1N4004 Diode

30x Resistor (100R, 220R, 1K, 4.7K, 10K, 47K,100K,1M)

3x LED White, Red, Yellow, Green, Blue

2x RGB LED

6x Breadboard Button

2x Potentiometer (10K, 100K)

2x 3-Pin Slider Switch

2x 40-Pin Male Header

40x Female-Male Jumper Wires

40x Male-Male Jumper Wires

40x Female-Female Jumper Wires

• Advancing the development of robotics technology w/ Earth's 2nd biggest & most advanced starter kit for Arduino. 65+ pieces w/ FOUR main boards: 100% Arduino-compatible Uno R3, Mega 2560, Nano V3 and ESP32 2.4 GHz WiFi+Bluetooth Development Board
• Explore programming electronics with all of the most common sensors and modules in Arduino like RFID Card-Key Reader, Ultrasonic Sensor, Real Time Clock, Impact Switch, 3-Axis Accelerometer, LCD, Relay, Servo and Stepper Motor - suitable for beginner or advanced users
• Build wireless IoT Automation projects with ESP32 Development Board, HC-05 Bluetooth Module, ESP8266 Wi-Fi Module, 2x NRF24L01 Wireless Transceivers and the W5100 Ethernet Shield
• All-in-one bundle with extra accessories + 16G USB storage with free access to the GAR Dropbox Cloud including PDF guides & links to tutorials and videos to help you learn to program all the parts and get started quickly
• Effective technical/customer support from USA with lifetime replacement guarantee on all parts – The Monster comes in 16" x 12" durable organizer tool box for safe transport and storage. No soldering required. Please let us know about any improvements we can make to the Monster Kit. Critical feedback is much appreciated

User questions & answers

Question:	Dose this come with instructions for projects that can be made with the parts? or do you have to come up with your own things to make
Answer:	It's a generic arduino uno, not made by the Arduino company. So far it works fine for me, but i've only been playing with it for two weeks.
Question:	Is this Arduino kit safe to take on Scandanavian airlines? Also, is anything flammable, corrosive, radioactive
Answer:	Board holder dimension: 13.4 cm X 17 cm
Question:	My MacBook is not recognizing this unit (the uno piece), has anyone else experienced this
Answer:	I am sorry it could be not shipped to morocco.
Question:	what ages ai this good for
Answer:	Good day Jose, I am not sure what your problem is with this mini cd, so l will just list some reasons and perhaps you can identify a solution. 1) Because this CD is smaller than the standard size, it can't be inserted directly into the slot of enclosed types of CD drives. The type of CD drive that you need to use are the drives that pop out like a small draw and the disc is then clipped directly onto the centre of the drive, then the drive is pushed closed. All laptop computers use this style of CD. 2) After you insert the mini CD, if it does not run automatically, then click on your desktop icon for "my compuer" and all your drives will be displayed, look for your CD drive icon and click on that, then your CD will run and the files on the disc will be displayed, then click on what ever file you want to see. 3) I can't think of any other issue that you may have, unless you have a faulty CD, however, if this was the case, your computer would report some sort of error messag. Hope this helps

• ELEGOO Smart Robot Car: An educational STEM kit beginners (kids) to get hands-on experience about programming, electronics assembling and robotics knowledge. It is an integration solution for robotics learning and made for education.
• Complete Package: Contains 24 kinds of module parts including obstacle avoidance, line tracing module, infrared remote control and also you can control it via phone and tablets of Android and iOS system, etc.
• Easy to Assemble: All the module interface has been modified with XH2. 54 ports as to make it much easier and convenient to assemble the car and reduce the chances for errors.
• Refined Tutorial in CD: HD rendering instructions on how to assemble the robot car from scratch and all the necessary programs and codes are included.
• Upgraded Package Design: More minimalism design and make it a perfect gift for your kids and friends. Note：(Applicable Age : 12+)To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.

User questions & answers

Question:	The website isn’t working how can I download the software I need
Answer:	The oils are made for candles only.
Question:	I am considering this for my son. What type of computer/laptop would work best for programming with this
Answer:	I'm terribly sorry to hear about this! Please email me at [email protected] so I can assist you further with this.
Question:	where can i download the software? It does not seem to be on their website
Answer:	The type of wax is natural soy wax.
Question:	Can you add a camera to the vehicle once completed
Answer:	I usually try to use natural soy wax or organics wax because they both help my the scent that I add to the candle stand out.

Product features

Learning while playing – a great way of cultivating interests

ELEGOO

Smart Robot Cat Kit V3.0 has multiple modes such as auto-go, infrared control, obstacle avoidance and line tracking modes. In each mode, you will learn how to load programs and command the car to run as instructed. The great interactivity that you can have with this robot car could definitely motive your curiosity and interest to find out why and how it works this way. Learning electronics is not as complicated as you might think, especially with our smart robot car kit it will become more interesting than ever. If your kids, family or friends are attracted to the electronics and robotics world this kit would be a great choice and perfect gift for them to start their first step on the electronic journey.

Redesigned interfaces to meet demands of different users

In the version of robot car kit V1.0, we used the original expansion board which has many pins available on the board and enables you to add extra sensors than what we provide in the kit as to fulfill more functions and makes it more personalized. But it will require a certain level of electronics knowledge and DIY experiences otherwise you may easily burn your sensors and boards. To avoid those potential errors from novice user we redesigned the expansion board and cables by adding XH2.54 interfaces in robot car kit V3.0, which makes wiring become very handy and easy and almost impossible to make mistakes when installing sensors. We also reserved the pins on the board so DIY lovers can customize it and have more possibilities. With that being said it really depends on your situation and background that which kit suits you more. Either way, we have a perfect solution for you.

Obstacle Avoidance

Fear of damage no more.

Under this mode the ELEGOO robot car will automatically detect obstacles ahead of it no matter which direction it is from with the ultrasonic sensors on the platform by sending waves and calculating the distance. Keep your car away from collision and enjoy the fun.

ELEGOO BLE Tool APP

A smart robot car on your phone

It wouldn’t be smart enough if you can’t control your robot car with your phone. Simply install the ELEGOO BLE Tool APP from APP Store and Google Play and team with our HC-08 module you can control your car freely. In our tutorial you will also learn how to edit and send signals to the board and make it run.

Line Tracking

Follow your runway

The line tracking modules at the bottom of the car make sure it follows the runway you design with its infrared transmitter tube and an infrared receiver tube. Make sure your runway is clear enough and long enough then you can enjoy a wonderful car racing show.

Component List:

1pcs ELEGOO UNO R3, 1pcs USB cable, 1pcs V5.0 extension board V3.0, 1pcs L298N motor driver board V3.0, 1pcs ultrasonic Sensor, 1pcs ultrasonic holder, 1pcs servo motor, 1pcs servo motor fixed plate, 1pcs line tracking module, 4pcs motor, 1pcs remote, 1pcs charger, 1pcs cell box, 2pcs 18650 battery, 1pcs tape, 8pcs separation shims, 2pcs acrylic plates, 4pcs wheel, 8 bags of screws and nuts for sensors and modules, 4pcs aluminum blocks , 10pcs copper columns, 1pcs plastic box, 1pcs CD with tutorial, Several DuPont wires, Several fix tools

Product description

Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true. The economical and most basic electronic components kit for Arduino projects Component listing: 1pcs UNO R3 Controller Board 1pcs USB Cable 1pcs Breadboard 1pcs 65 Jumper Wire 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Tilt Switch 1pcs Photoresist or 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs Button (small) 10pcs Resistor (10R) 10pcs Resistor (100R) 10pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 5pcs Female-to-male DuPont Wire

• The cheapest and most basic electronic components kit for Arduino beginner
• Free PDF tutorial including project introduction and code will be provided, you can save a lot of time searching them.
• With the newest UNO R3 development board + USB Cable and all the basic components.
• Nice package in the box with clear listing and CD.
• 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO, Arduino kit.

User questions & answers

Question:	what pins can do PWM? Do they all have the same hz
Answer:	Data cables don't connect a psu to the SSD. PSU is power supply unit... Data cables connect from the Sata ports on the board to the Sata drives data ports. Your power supply should have the power connectors to connect to the appropriate thing on your drive.
Question:	What happened? yesterday, the price was
Answer:	this is the best overclocking board I have ever used. simple bios. great overclocking software from asus. rock solid on air or water.
Question:	What is this for
Answer:	The guy above is incorrect about one thing, the ROG and Prime both share the ability to establish a 3.1 to 20 pin connection to a front panel.
Question:	Can you code this with the arduino ide
Answer:	it doesn’t come with cash

• The most economical kit comes with everything compatible with Arduino to starting programming for beginners .
• This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself).
• Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc.
• Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service.
• All of the Components and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you.

User questions & answers

Question:	what kinds of electronic projects can i build with this kit
Answer:	I've been in computers 40+ years; this is a great package to teach coding. I'm teaching high schools kids. Package, and also on the web, are great short simple examples. Only think I've added is a card with 4 relays. We are programming a model railroad; important to 'see' what your code is doing. Well spent $40. Great Christmas present for 15+ year olds.
Question:	Would the 9v 1a adapter come eu according to my shipping address
Answer:	Dear, Sorry, we are unable to provide different plug specifications according to the address. Currently, the plugs included in this kit are US-compliant.
Question:	What size are the resistors
Answer:	10 100 220 330 1k 2k 5k 10k 100k 1meg you get ten each of these. This is a great kit. only thing I added was four relays.
Question:	Can you use the arduino software with this
Answer:	Yes, it comes with an arduino UNO board. You just need to download and install the arduino IDE on your computer and you're good to go.

Product features

REXQualis Super Starter Kit help everyone easy-to-get started with programming and robotics.

• REXQualis Super Starter Kit include a large number of components and sensors, it suitable for everyone to learn electronics and programming. we provide a detailed tutorial, introducing the basic setting compatible with Arduino IDE, the working principles of the sensors and the simple program to enable the microcontroller board to control the sensors.
• For novice users, even if you don't have any electronics knowledge, we provide a detailed and easy-to-understand tutorials, just follow our tutorial and step by step, you will find that it is more fun than you ever expected.
• For advanced users, like lab engineers, teachers , students and makers, use it to build low cost scientific instruments, to prove chemistry and physics principles, or to get started with programming and robotics.
• It’s also a good choice and perfect gift for your family or kids who are obsessed with electronics, programming or robotics, so that you can study and grow together.

LCD1602 Display Module

In this project , you will learn how to connect LCD Display to microcontroller board and display what we type. In addition, with the Potentiometer we can control the brightness of the screen.

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

REXQualis LCD1602 Module come with pin header, not need to be soldered by yourself.Then you can easy to Lining up the display with the top of the breadboard helps to identify its pins.

Control Stepper Motor by IR

In this project, you will learn a fun and easy way to control a stepper motor from a distance using an IR remote control.

The 28BYJ-48 is a small 5 volt geared stepping motors which are apparently widely used to control things like automated blinds, A/C units. And it come with a ULN2003 stepper motor driver board, allows you to easily control the 28BYJ-48 stepper motor from a microcontroller.

The IR sensor is connected to the microcontroller board directly since it uses almost no power.When you are fully connected, you can control the stepping motor through IR remote.

DC Motor with L293D and Relay

In this project you will learn how to control a small DC motor by microcontroller board with using a L293D transistor and Relay.

L293D transistor is a very practical chip that can independently control two DC motors. In this experiment, just half of the chip is used. Since most pins on the right side of the chip are used to control the second motor, they will not be used here.

Relays are generally used to switch smaller currents in a control circuit and do not usually control power consuming devices except for small motors and Solenoids that draw low amps. Nonetheless, relays can "control" larger voltages and amperes by having an amplifying effect because a small voltage applied to a relays coil can result in a large voltage being switched by the contacts.

Component listing: