13 best arduino official starter kit

Product description

This kit walks you through the basics of Arduino and electronics in a hands-on way. You will be able to build 15 projects using components that let you control the physical world through different kinds of sensors and actuators. Comes with a 170 page project guide book. Includes over 100 components

• It’s a quick and easy way to get started with the learning of STEAM subjects at home, and it can be used to think critically, learn collaboratively, and solve problems.
• This kit walks you through the basics of Arduino and electronics in a hands-on way. No prior experience is required, as the kit introduces both coding and electronics through fun, engaging, and hands-on projects.
• The kit comes with a 170-page project guide book and includes over 100 components.
• You’ll be able to build 15 different projects using components that let you control the physical world with different kinds of sensors and actuators.
• Plenty of free activities and materials are available online, along with lots of inspirational tutorials and videos that mean you can continue using the kit in creative ways even after you’ve completed the projects.

User questions & answers

Question:	does this include a solderless breadboard? specs on breadboard
Answer:	Hello! Thanks for reaching out! Our cups are durable, plastic cups. The cups are more reinforced than regular plastic cups you would buy at a grocery store. If you have questions or concerns, don't hesitate to ask. We are more than happy to help! Thank you, Grown Man Games
Question:	does the beginner kit come with programming software
Answer:	Yes, these kits are reusable. Just rinse after use to make sure they are clean before you stack them. Also 4 extra cups are included!
Question:	Amazon says that this starter kit is frequently bought together with "Wall Adapter Power Supply - 9V DC 650mA". Do I need to buy this power supply
Answer:	The table is pretty durable and has an easy to wipe surface. I haven't had any issues with warping.Height seems good; normal table height. Make sure to extend the legs all the way.
Question:	Can I get a parts list of what is included in this kit
Answer:	Yes

Product description

This Exclusive Arduino Deluxe Bundle includes everything you need to get started with Arduino - Including the only Official Starter Kit from Arduino (includes the Arduino Uno Revision 3 board), MAKE Magazine's "Getting Started with Arduino: The Open Source Electronics Prototyping Platform" and Speed Kits handy PIN-OUT Reference Chart for the Uno R3. No need to shop around for breadboards, sensors, LEDS, etc. This kit has it all and is designed to take you from Novice to Expert providing hours of instruction and a multitude of projects.



Just a few of the projects you can build using the parts and instructions included in this kit:



+ SPACESHIP INTERFACE design to control panel for your startship

+ KEYBOARD INSTRUMENT play music and make some noise with this keyboard

+ KNOCK LOCK tap out the secret code to open the door

+ ?TOUCHY-FEEL LAMP a lamp that responds to your touch

+ HACKING BUTTONS create a master control for all your devices!

+ LOVE-O-METER measure how hot-blooded you are

+ CRYSTAL BALL a mystical tour to answer all your tough question

+ Many, Many More



What's in the Box: The Official Arduino Starter Kit from Arduino, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback - December 28, 2014, Speed Kits Uno R3 PIN-OUT Chart

• Includes The Only Official Arduino Starter Kit From Arduino, The Best Selling Book From Make Magazine: Getting Started with Arduino: The Open Source Electronics Prototyping Platform and a Handy Uno R3 PIN-OUT Chart from Speed Kits
• Includes Book, Make: Getting Started with Arduino: The Open Source Electronics Prototyping Platform Paperback
• Includes components for 15 projects
• Includes Arduino Uno R3 And Exclusive Speed-Kits Arduino PIN OUT Quick Reference Chart
• Includes a total of over 200 electronic parts and components

User questions & answers

Question:	List of all the parts
Answer:	Here's the parts list.... I highly recommend this kit if your just starting out with Arduino!The Arduino Starter Kit contains:1 x Arduino Projects Book1 x Arduino UNO Rev 3 microcontroller1 x USB cable1 x Breadboard1 x Easy-to-assemble wooden base1 x 9V battery snap70 x Solid core jumper wires2 x Stranded jumper wires6 x Photoresistors3 x Potentiometers (10K ohm)10 x Push buttons1 x Temperature sensor1 x Tilt sensor1 x Alphanumeric LCD (16x2 character display)1 x Bright white LED1 x Multicolor RGB LED8 x Red LEDs8 x Green LEDs8 x Yellow LEDs3 x Blue LEDs1 x Small DC motor (6/9V)1 x Small servo motor1 x Piezo capsule1 x H-bridge motor driver2 x Optocouplers5 x Transisitors2 x Mosfet transistors5 x 100nF capacitors3 x 100uF capacitors5 x 100pF capacitors5 x Diodes3 x Transparent gels (red, green, blue)1 x 40 pin male header strip20 x 220 ohm resistors5 x 560 ohm resistors5 x 1K ohm resistors5 x 4.7K ohm resistors10 x 10K ohm resistors5 x 1M ohm resistors5 x 10M ohm resistors
Question:	Can you recommend a case to keep all the parts in
Answer:	Hello! Thank you for reaching out! The dimensions of our mini beer pong table are 22" x 7.9" x 0.75" inches. If you have questions or concerns, don't hesitate to ask. We are more than happy to help! Thank you, Grown Man Games
Question:	Is there any programming and if there is not is there another official starter kit for it on amazon
Answer:	Hello - This table is designed for Beer Pong use and pong balls can bounce off the table.
Question:	What is the difference between this item and the other starter kit that sells for
Answer:	Yes

Product description

This is the most complete kit for starters to learn programming for Arduino projects. It is very fun and easy to use. Kit is 100% compatible with all Arduino modules. The 63 parts are packaged in an attractive, convenient container. Component listing: 5pcs White LED 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs 22pf Ceramic Capacitor 5pcs 104 Ceramic Capacitor 2pcs Photo resistor 1pcs Thermistor 5pcs Diode Rectifier (1N4007) 2pcs Electrolytic Capacitor (10UF 50V) 2pcs Electrolytic Capacitor (100UF 50V) 5pcs NPN Transistor (PN2222) 5pcs NPN Transistor (S8050) 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 1pcs Sound Sensor Module 1pcs LCD1602 Module ( with pin header) 1pcs IC L293D 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs RTC Module 1pcs DHT11 Temperature and Humidity Module 2pcs Potentiometer 1pcs Rotary Encoder Module 1pcs Joystick Module 1pcs Keypad Module 1pcs 5V Relay 1pcs IR Receiver Module 1pcs UNO R3 Controller Board 1pcs Breadboard 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Prototype Expansion 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs HC-SR501 PIR Motion Sensor 1pcs Ultrasonic Sensor 1pcs GY-521 Module 1pcs 3V Servo Motor 1pcs MAX7219 Module 1pcs Remote 1pcs 9V 1A Power Supply 1pcs 65 Jumper Wire 1pcs Water Lever Sensor 1pcs USB Cable 1pcs 9V Battery with DC 1pcs RC522 RFID Module 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 20pcs Female-to-male DuPont Wire.

• More than 200 components, this is the most complete starter kit you will find. Great value starter kit with 63 kinds of electronic components.
• Has all the components you need and a free PDF tutorial (more than 30 lessons) to show you how to use them. All code to use the modules is included on the CD.
• All the modules come soldered so they are easy to wire up.
• Includes ELEGOO R3 controller board and USB cable, 100% compatible with Arduino IDE Official R3, Official kit.
• Kit comes packaged in compartmentalized case with a bonus box for small parts like LED’s, IC’s, buttons, diodes, etc.

User questions & answers

Question:	What type of LED lights are in this kit
Answer:	Used to design small circuits and small games. Not intended for lamps. Theese small diodes are not bright enough for lamps
Question:	My 15 yr old is into sound, motors and magnets and wants to take over the world. Is this the best kit out there
Answer:	The arduino has serial communication abilities that can be used to “connect” the devices and/ or let them exchange information. It may also be possible to use Bluetooth modules to let them communicate. Not exactly sure what this question is asking.
Question:	Is soldering required
Answer:	For this kit, the appropriate parameters for the adapter is：output 9V/1A DC Plug 5.5*2.1mm.
Question:	Is the elego uno the same as arduino uno? Is there any difference in the chips and the system
Answer:	Yes, our power supply module output is 5V, the access power is 9V/1A.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo UNO R3 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics1 to take their first steps on electronics journey.

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo UNO R3 starter kit. The most essential parts in this kit are UNO R3 controller board and expansion board, which is a perfect clone with excellent product finish compatible with Arduino projects.

Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using an UNO R3 and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

Product description

Component listing: 1pcs UNO R3 Controller Board 1pcs LCD1602 Module ( with pin header) 1pcs Breadboard Expansion Board 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs Joystick Module 1pcs IR Receiver 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Ultrasonic Sensor 1pcs DHT11 Temperature and Humidity Module 1pcs 9V Battery with DC 1pcs 65 Jumper Wire 1pcs USB Cable 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Potentiometer 1pcs 5V Relay 1pcs Breadboard 1pcs Remote 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 2pcs Photo resistor 1pcs Thermistor 2pcs Diode Rectifier (1N4007) 2pcs NPN Transistor (PN2222) 1pcs IC 74HC595 120pcs Resistor 10pcs Female-to-male DuPont Wire.

• Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
• The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
• Lcd1602 module with pin header (not need to be soldered by yourself)
• This is the upgraded starter kits with power supply module, 9V battery with dc
• High quality kite with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.

User questions & answers

Question:	which charger i need
Answer:	This kit is easy to learn Arduino and very complete.
Question:	The CD the came with my kit was blank. Can anyone recommend a good tutorial for a complete novice
Answer:	Yes I program mine with A raspberry pi the zero-w to the pi 4 ,8 gig will work !!
Question:	What's the catch? It seems to good to be true
Answer:	It's definitely not too complicated as long as there's the interest, patience, and persistence.
Question:	Is the elegoo uno the same as an arduino uno or is it modified in any way
Answer:	Here is the link to download the latest version: https://www.elegoo.com/tutorial/Elegoo%20The%20Most%20Complete%20Starter%20Kit%20for%20MEGA%20V1.0.2017.10.31.zip

Product features

Compatibility with Official Arduino IDE, Software, Sendsors and Codes

Arduino is an open-source platform used for building electronics projects. Arduino consists of both a physical programmable circuit board (often referred to as a microcontroller) and a piece of software, or IDE (Integrated Development Environment) that runs on your computer, used to write and upload computer code to the physical board.

For the reason of open source, the manufacture of Arduino boards and software distribution by anyone is permitted. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

Elegoo is one of the manufacturer on the market, whose clone products are compatible with the official Arduinomicrocontroller boards, they can use the official Arduino software, sensors and codes.

Learn Electronics and Programming with ELEGOO

The UNO boards can be used as the brains behind almost any electronics project. UNO can interact with buttons, LEDs, motors, speakers, GPS units, cameras, the internet, and even your smart-phone or your TV! By connecting the UNO board with a personal computer via a USB cable and uploading programs to the board, users can create digital devices and interactive objects that can sense and control objects in the physical and digital world like robots or even honest fortune-telling machines.

For this Elegoo Super Starter Kit, we provide a 24-lesson tutorial, introducing the basic setting of the software IDE, the working principles of the sensors and the simple program to enable the UNO board to control the sensors.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

74HC595 and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

4 digit 7 segment display

7 segment displays consist of 7 LEDs, called segments, arranged in the shape of an “8”. Most 7-segment displays actually have 8 segments, with a dot on the right side of the digit that serves as a decimal point. When using 4-digit 7-segment display, the common anode or common cathode pin is used to control which digit is displayed. Even though there is only one digit working, the principle of Persistence of Vision enables you to see all numbers displayed because each the scanning speed is so fast that you hardly notice the intervals. By building the circuit and editing the program, users can make a simple display showing certain numbers, or more complexly, a count-up timer or a elecrical rolling dice.

Stepper Motor

Stepper motors are DC motors that move in discrete steps. They have multiple coils that are organized in groups called "phases". By energizing each phase in sequence, the motor will rotate, one step at a time.

With a computer controlled stepping you can achieve very precise positioning and/or speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.

the simplest way of interfacing a unipolar stepper motor to UNO board is to use a breakout

for ULN2003A transistor array chip, applying voltage to each of the coils in a specific sequence.

Product description

Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true component listing: 1pcs Mega 2560 Controller Board 1pcs USB Cable 1pcs Breadboard 1pcs 65 Jumper Wire 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Tilt Switch 1pcs Photo resistor 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs Button (small) 10pcs Resistor (10R) 10pcs Resistor (100R) 10pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 5pcs Female-to-male DuPont Wire.

• The MEGA2560 complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE
• Free pdf tutorial in the cd (more than 35 lessons)
• Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)
• Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc.
• We have always cared about the customer experience and improve the product function details

User questions & answers

Question:	would this kit be appropriate for adult or would it be to easy
Answer:	Hi there! We're always working to test new devices, but right now the app is only compatible with Android and iOS devices. For a full list, visit LEGO.build/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can this kit be programmed with the arduino software (ide) available on arduino's page
Answer:	Hi there! This LEGO® set includes 9 characters, 3 vehicles, and building instructions. It also has a movie stage with a swiveling camera stand, a double-sided backdrop, and arms to move the ships and characters. The app is free to download through Google Play or the Apple App Store. For a list of requirements and compatible devices, take a peek at LEGO.com/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can children younger than 15 use this or is it too complicated
Answer:	Hi there! The app is currently only available for Android and iOS smartphones, though our developers are always looking to try it on new devices, and a tablet version may be available in the future. A tablet won't fit in the holder included in the set, though with some creativity and extra parts, you may be able to modify it a bit. Kind regards, Emily LEGO® Customer Service
Question:	The instruction cd i got along with this kit is blank. i'm unable to access any of pdf, code or libraries. how can i download this
Answer:	This is not a mini lego set. This arrives in a big box. Buy from Amazon seller Acebeach for same day shipping and handling.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo MEGA 2560 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo MEGA 2560 starter kit. The most essential parts in this kit are MEGA 2560 controller board and expansion board, which is a perfect clone with excellent product finish Compatible with Arduino projects. Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using a Mega2560 board and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it!

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

Product description

Easy to Understand Tutorial

The tutorial includes code, code interpretation, circuit diagrams, connection diagrams, and sample diagrams. You can start right now from ZERO.



Please contact us if you need it. Or download it from our official website.



Tutorial Content

Lesson 0 What is Arduino

Lesson 1 Blink

Lesson 2 LED

Lesson 3 RGB LED

Lesson 4 Push Button

Lesson 5 Active Buzzer and Potentiometer

Lesson 6 Passive Buzzer

Lesson 7 Eight LED with 74HC595

Lesson 8 The Serial Monitor

Lesson 9 Photoresistance

Lesson 10 LED Segment Displays

Lesson 11 Servo

Lesson 12 DHT11



KeeYees: Best choice in various Electronic Modules & Components, DIY Parts and Tools to

support your work and design challenges from Home, School to Industrial applications!

• This kit combines of the cheapest and most basic electronic components. Easy to use. Very suitable for Arduino beginner.
• Up to 33 types and 256pcs electronic components and modules make your experiment more interesting.
• Universal easy-to-use development board ATmega16U2, ATmega328P, 100% compatible with the official version. Only connect it to the PC with a USB cable, you can start immediately.
• Experiments included: light a LED, flash running lights, sound a buzzer, Display numbers by digital tube, use the DHT11 sensor to measure temperature and humidity simultaneously, and use the buzzer to tweet Do, Re, Mi, Fa, So, La, Si, Do. etc.

Product description

Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true. The economical and most basic electronic components kit for Arduino projects Component listing: 1pcs UNO R3 Controller Board 1pcs USB Cable 1pcs Breadboard 1pcs 65 Jumper Wire 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Tilt Switch 1pcs Photoresist or 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs Button (small) 10pcs Resistor (10R) 10pcs Resistor (100R) 10pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 5pcs Female-to-male DuPont Wire

• The cheapest and most basic electronic components kit for Arduino beginner
• Free PDF tutorial including project introduction and code will be provided, you can save a lot of time searching them.
• With the newest UNO R3 development board + USB Cable and all the basic components.
• Nice package in the box with clear listing and CD.
• 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO, Arduino kit.

User questions & answers

Question:	what pins can do PWM? Do they all have the same hz
Answer:	Data cables don't connect a psu to the SSD. PSU is power supply unit... Data cables connect from the Sata ports on the board to the Sata drives data ports. Your power supply should have the power connectors to connect to the appropriate thing on your drive.
Question:	What happened? yesterday, the price was
Answer:	this is the best overclocking board I have ever used. simple bios. great overclocking software from asus. rock solid on air or water.
Question:	What is this for
Answer:	The guy above is incorrect about one thing, the ROG and Prime both share the ability to establish a 3.1 to 20 pin connection to a front panel.
Question:	Can you code this with the arduino ide
Answer:	it doesn’t come with cash

Product description

ELEGOO Upgraded 37 sensor modules kit is the most useful and highest cost performance sensor kit in market. It is 100% suitable for beginners. And it is also 100% compatible with Raspberry PI and STM32. But if you want to use it with Raspberry PI and STM32, you may find the tutorial by yourself. We only offer the tutorial in our CD. The kit has only sensor modules, if you want to use it, you will need the wires and controller boards. Warning Tip: The input voltage of Elegoo Power Supply Module is 6. 5v - 9v (DC) via 5. 5mm x 2. 1mm plug . Please DO NOT over charge it otherwise it will burn your board and chips. Component listing: 1 x Joystick Module 1 x Relay Module 1 x Rotary Encoder Module 1 x DS-1307 RTC Module 1 x Ultrasonic Sensor Module 1 x HC-SR501 PIR sensor Module 1 x Flame Sensor Module 1 x Linear Hall Module 1 x Metal Touch Module 1 x Digital Temperature Module 1 x Big Sound Module 1 x Small Sound Module 1 x RGB LED Module 1 x SMD RGB Module 1 x Two-tone Color Module 1 x 7 Color Flash Module 1 x Laser Emit Module 1 x Shake Module 1 x IR Receiver Module 1 x IR Emission Module 1 x Tilt Switch Module 1 x Button Module 1 x Active Buzzer Module 1 x Passive Buzzer Module 1 x 18B20 temp Module 1 x Photo-resistor Module 1 x Temperature and Humidity Module 1 x GY-521 Module 1 x Photo-interrupter Module 1 x Tap Module 1 x Membrane Switch Module 1 x Avoidance Module 1 x Tracking Module 1 x Magnetic Spring Module 1 x Water Lever Sensor 1 x Power Supply Module 1 x LCD1602 Module (with pin header)

• Updated from the old version (others): Received great ideas from our customers and adopted in this upgraded kit.
• Removed useless modules like light cup and mercury module, heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc.
• Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. If you prefer download the tutorials online from the official website
• 100% compatible with Arduino official IDE, Raspberry Pi and STM32.
• Note: To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.

User questions & answers

Question:	Is there an available pdf version of the cd-rom
Answer:	This fingerprint scanner needs a micro controller with a firmware that can operate the fingerprints that are scanned and stored in the device. It works with a 3.3 to 6V DC power supply and the digital interface to the micro controller requires 3.3V to 5V. If you run it off a 9V battery, you will need a voltage regulator to power this fingerprint scanner as well as the micro controller.
Question:	ok for 8yr old
Answer:	Yes it is. However, you must buy the cable TTL Serial, this is crucial for establishing the connection with your arduino.
Question:	Are the data/specification sheets for the sensors provided
Answer:	The device works with power from 3.3V to 6V. It should work fine with 3.3V Raspberry Pi signals. Make sure you power the fingerprint module with the same 3.3V DC
Question:	Lesson 26: the tutorial does not give the meanings of the signal pins clk, dt, and sw. also, can anyone make sense of the "principle" text
Answer:	Yes you should be able to use it with rasp pi. Youll need the code which is python based. Here's a link to it. https://github.com/QuickGroup/pyGT511C3

Product features

Sensor kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo 37-in-1 sensor kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists for starters, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

Detailed and easy-to-follow tutorial helps you learn electronics without problems

An enjoyable and educational experience is definitely the priority option to learn electronics. Our detailed tutorial with 31 lessons ranges from simple projects like how to monitor temperature and humidity with DHT11 sensor to complex projects like how to achieve the goal of timing control switch using a 1 channel relay module. Easy to understand and easy to follow.

Schematics and wiring diagrams are also presented in out tutorial, which helps you better understand why those sensors are connected in that way. Besides that we also have the IDE for programming codes ready in the CD and our website. If you are a professional and prefer a little DIY you can also edit the codes as you wished and make it more personalized.

DHT11 Temperature and Humidity sensor

DHT11 digital temperature and humidity sensor is a composite sensor which contains a calibrated digital signal output of the temperature and humidity. The dedicated digital modules collection technology and the temperature and humidity sensing technology are applied to ensure that the product has high reliability and excellent long-term stability. The sensor includes a resistive sense of wet components and a NTC temperature measurement devices, and connects with a high-performance 8-bit microcontroller.

HC-SR501 PIR Motion Sensor

PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. PIRs are basically made of a pyroelectric sensor, which can detect levels of infrared radiation. Everything emits some low level radiation, and the hotter something is, the more radiation is emitted.

GY-521 Triaxial acceleration triaxial gyroscope sensor

GY-521 six-axis sensor usually consists of two which are accelerometer and gyroscope. The GY-521 is a 6 DOF (Degrees of Freedom) or a six axis IMU sensor, which means that it gives six values as output. Three values from the accelerometer and three from the gyroscope. It is also a sensor based on MEMS (Micro Electro Mechanical Systems) technology. Both the accelerometer and the gyroscope is embedded inside a single chip. This chip uses I2C (Inter Integrated Circuit) protocol for communication.

• Super starter kit and Affordable Price - This is a complete electronic kit with more than 200pcs components for arduino beginners. Includes R3 controller board and USB cable, 100% compatible with Arduino R3 Mega 2560 Mega328 Nano.
• Detailed Instructions - This R3 kit for arduino with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components.
• 25 Projects Provided - As an upgraded starter kit ,more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience.
• Excellent package - A nice plastic packaging box is included for easy and neat storage, being a surprise when you receiving the product.
• Professonal Support - Sunfounder customer service team are always willing to solve any question from our customers, please refer to the URL and after-sales service email on the CD if you have any question, it will ultimately aid us in continually improving our products and services.

User questions & answers

Question:	How much volts does the dc motor have
Answer:	This game card include the game WWF wrestlefest. But no tekken 3.
Question:	What are the specs on the resistors
Answer:	This game card include the game Crime fighters.
Question:	Does it came with arduino wall power adapter
Answer:	Search it on YouTube, plenty of videos on subject
Question:	Can the processor be removed from the board or is it the soldered on type
Answer:	It sure does we tried our best at finding all the best out of 289 games we durrently have 261 N64 games Robert Raspberry Pi Xtreme

Product features

Introduction:

With this Kit, we will walk you through the know-how of using the SunFounder board in a hands-on way.Starting with the basics of electronics, you'll learn through building several creative projects.Including a selection of the most common and useful electronic components, This kit will help you "control" the physical world.

• 100% compatible with Arduino R3 Mega 2560 Mega328 Nano.
• 243 pieces components, 25 projects made available.
• Detailed PDF tutorial on the CD.
• A nice plastic packaging box for easy and neat storage.

25 projects for learners

• Lesson 1 Install and Introduce for Arduino IDE
• Lesson 2 Add libraries
• Lesson 3 Blinking LED
• Lesson 4 Flowing LED Lights
• Lesson 5 Controlling LED by Button Lesson 6 Doorbell
• Lesson 7 Tilt Switch
• Lesson 8 Relay
• Lesson 9 RGB LED

• REXQualis complete starter kit base on Arduino UNO R3 comes with more than 200pcs components, 67 kinds of components and sensors module.
• LCD1602 Module，MPU-6050 Module and RC522 RFID Module come with pin header, Motors come with wires, not need to solder by yourself.
• Include High Quality Base Board base on Arduino UNO R3 and Sensors, 100% compatible with Arduino IDE.
• Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service.
• All of the Components and Integrated Circuits are individually packaged and labeled,including some nice small boxs to keep the widget such as LED, IC, buttons, diodes, etc

User questions & answers

Question:	What gauge are the wires that come with this kit
Answer:	9V / 1A
Question:	Does it ship with batteries included
Answer:	The Remote and Real Time Clock Module is come with CR2 batteries.
Question:	Cual es el funcionamiento de este producto
Answer:	Hello, is the program running on the Arduino ide through the arduino board, and the function is reflected through the connected module。
Question:	What is it
Answer:	This is an stating kit, you can work on this as a testing environment.

Product features

REXQualis Complete Starter Kit help everyone easy-to-get started with programming and robotics.

• REXQualis Complete Starter Kit include a large number of components and sensors, it suitable for everyone to learn electronics and programming. we provide a detailed tutorial, introducing the basic setting compatible with Arduino IDE, the working principles of the sensors and the simple program to enable the microcontroller board to control the sensors.
• For novice users, even if you don't have any electronics knowledge, we provide a detailed and easy-to-understand tutorials, just follow our tutorial and step by step, you will find that it is more fun than you ever expected.
• For advanced users, like lab engineers, teachers , students and makers, use it to build low cost scientific instruments, to prove chemistry and physics principles, or to get started with programming and robotics.
• It’s also a good choice and perfect gift for your family or kids who are obsessed with electronics, programming or robotics, so that you can study and grow together.

LCD1602 Display Module

In this project , you will learn how to connect LCD Display to microcontroller board and display what we type. In addition, with the Potentiometer we can control the brightness of the screen.

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

REXQualis LCD1602 Module come with pin header, not need to be soldered by yourself. Then you can easy to Lining up the display with the top of the breadboard helps to identify its pins.

Control Stepper Motor by IR

In this project, you will learn a fun and easy way to control a stepper motor from a distance using an IR remote control.

The 28BYJ-48 is a small 5 volt geared stepping motors which are apparently widely used to control things like automated blinds, A/C units. And it come with a ULN2003 stepper motor driver board, allows you to easily control the 28BYJ-48 stepper motor from a microcontroller.

The IR sensor is connected to the microcontroller board directly since it uses almost no power.When you are fully connected, you can control the stepping motor through IR remote.

Soil Moisture Sensor Module

In this project, you will understand how you can use the soil moisture sensor in your projects. The soil moisture sensor or the hygrometer is usually used to detect the humidity of the soil. So, it is perfect to build an automatic watering system or to monitor the soil moisture of your plants. The voltage that the sensor outputs changes accordingly to the water content in the soil.When the soil is:

• Wet: the output voltage decreases
• Dry: the output voltage increases

Component listing:

• The most economical kit comes with everything compatible with Arduino to starting programming for beginners .
• This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself).
• Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc.
• Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service.
• All of the Components and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you.

User questions & answers

Question:	what kinds of electronic projects can i build with this kit
Answer:	I've been in computers 40+ years; this is a great package to teach coding. I'm teaching high schools kids. Package, and also on the web, are great short simple examples. Only think I've added is a card with 4 relays. We are programming a model railroad; important to 'see' what your code is doing. Well spent $40. Great Christmas present for 15+ year olds.
Question:	Would the 9v 1a adapter come eu according to my shipping address
Answer:	Dear, Sorry, we are unable to provide different plug specifications according to the address. Currently, the plugs included in this kit are US-compliant.
Question:	What size are the resistors
Answer:	10 100 220 330 1k 2k 5k 10k 100k 1meg you get ten each of these. This is a great kit. only thing I added was four relays.
Question:	Can you use the arduino software with this
Answer:	Yes, it comes with an arduino UNO board. You just need to download and install the arduino IDE on your computer and you're good to go.

Product features

REXQualis Super Starter Kit help everyone easy-to-get started with programming and robotics.

• REXQualis Super Starter Kit include a large number of components and sensors, it suitable for everyone to learn electronics and programming. we provide a detailed tutorial, introducing the basic setting compatible with Arduino IDE, the working principles of the sensors and the simple program to enable the microcontroller board to control the sensors.
• For novice users, even if you don't have any electronics knowledge, we provide a detailed and easy-to-understand tutorials, just follow our tutorial and step by step, you will find that it is more fun than you ever expected.
• For advanced users, like lab engineers, teachers , students and makers, use it to build low cost scientific instruments, to prove chemistry and physics principles, or to get started with programming and robotics.
• It’s also a good choice and perfect gift for your family or kids who are obsessed with electronics, programming or robotics, so that you can study and grow together.

LCD1602 Display Module

In this project , you will learn how to connect LCD Display to microcontroller board and display what we type. In addition, with the Potentiometer we can control the brightness of the screen.

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

REXQualis LCD1602 Module come with pin header, not need to be soldered by yourself.Then you can easy to Lining up the display with the top of the breadboard helps to identify its pins.

Control Stepper Motor by IR

In this project, you will learn a fun and easy way to control a stepper motor from a distance using an IR remote control.

The 28BYJ-48 is a small 5 volt geared stepping motors which are apparently widely used to control things like automated blinds, A/C units. And it come with a ULN2003 stepper motor driver board, allows you to easily control the 28BYJ-48 stepper motor from a microcontroller.

The IR sensor is connected to the microcontroller board directly since it uses almost no power.When you are fully connected, you can control the stepping motor through IR remote.

DC Motor with L293D and Relay

In this project you will learn how to control a small DC motor by microcontroller board with using a L293D transistor and Relay.

L293D transistor is a very practical chip that can independently control two DC motors. In this experiment, just half of the chip is used. Since most pins on the right side of the chip are used to control the second motor, they will not be used here.

Relays are generally used to switch smaller currents in a control circuit and do not usually control power consuming devices except for small motors and Solenoids that draw low amps. Nonetheless, relays can "control" larger voltages and amperes by having an amplifying effect because a small voltage applied to a relays coil can result in a large voltage being switched by the contacts.

Component listing:

• PDF tutorials with more than 20 lessons are included in CD. UNIROI for Arduino Starter Kit is specially designed for Arduino beginners.
• RAB Holder: Fixing Arduino 328P Control Board, mega2560, raspberry pi and breadboard for your project, make it easier to build and carry your projects.
• Upgraded Aruino 328P control board is based on ATMega328 chip for controlling, 100% compatible with official version Arduino. And features faster transfer rates and more memory with ATMega16U2 chip instead of ATMega8U2.
• For Arduino power supply module, LCD1602 module with pin header (No Need to Solder), Arduino motor and Arduino wires are included.
• Gift: Resistor color card (Please add resistors when using LED to avoid over current), Raspberry Pi GPIO reference card with wiring Pi and BCM codes for all Raspberry pi motherboard. Convenient to check the Pin corresponding for your experiment.

User questions & answers

Question:	Does this work on MacOS
Answer:	Yes, 12
Question:	What is the input voltage of the power supply module
Answer:	Not sure but all the mame games that load work. There are some games like KIller Instincts that won't load for whatever reason. Some ran a bit choppy but I overclocked my Retropie 3B+ to 1.5mhz and they all run well now. Mame has the most games on this SD Card...hundreds of them . . The ones that do load work fine. Good luck.
Question:	Does this arduino uno starter kit have a data sheet for its componenets? such as voltage of the leds
Answer:	Regardless of weather or not it has any light gun games. Light guns will not work on modern televisions. You would need an old crt tv.
Question:	Can this be used with a raspberry pi
Answer:	Hi, dear fridnd! This card can only run on Raspberry Pi 2B, 3B, 3B+. If you want to work on Raspberry Pi 4B, you can buy the game card from this link: https://www.amazon.com/dp/B0834DB37F or https://www.amazon.com/dp/B083D7Z57V

Product features

Compatible with Arduino 328P Control Board

Main Chip: ATMega328

USB Serial Ports Chip: ATMega16U2

Features:

1. 100% compatible with official Arduino kits, works with software at Arduino.cc

2. Faster transfer rates and more memory

3. Support both 3.3V&5V power supply

RAB Holder with Wide Compatibility

The RAB platform can be used to fix Arduino 328P Control Board, Mega 2560,raspberry pi and breadboard in position, make it easy to build your project and carry the finished project without damage.

It is widely compatible with Arduino 328P Control Board, Mega 2560 & Raspberry Pi 3 Model B, 2 Model B,1 Model B+ RPI 4B Zero W and Zero.

1 Digit 7 Segment Display

In this lesson, you will learn how to use 74HC595 chip to control 1 digit 7 segment tube. 74HC595 is a very useful chip which only need 3 digital pin of Arduino for 8 outputs. It greatly save Arduino materials.

Stepper Motor

In this lesson, you will learn how to use ULN2003 driver module to control the rotation of stepper motor. As the current of Arduino is not enough to drive the motor, you will need the driver chip to drive it. This driver module is easy for wiring and using. It is also convenient to control the rotation of the stepper motor and can be used to drive DC motor.

LCD1602 Display Module

LCD1602 display module has LED backlight and can display up to 2 lines of 16 characters. It is designed to display letters, numbers, symbols and dot matrix. It is widely used in low power consumption applications.

• Perfect choice for beginners to learn, electronics and program.
• This kit with tutorial user manual containing more than 20 lessons,code,Libraries, datasheets, and so on.
• 100% Compatible with program.
• Inlcude type motors and LCDs with servo motor, stepper motor and DC Motor; LCD 1602, LCD 4-bit 7-segment Display etc.
• LCD 1602 module with pin header (not need to be soldered by yourself)

User questions & answers

Question:	What is the name of the Arduino in this product and what is its name in the Arduino program
Answer:	They refuse to List them. And it doesnt even show them on the Box either
Question:	Does the board have wifi or bluetooth? If not is there a kit in the same price range that does have bluetooth or wifi
Answer:	No
Question:	Is this 100% compatible with arduino hardware and software
Answer:	No
Question:	Which charger do I need
Answer:	Butane, I have to click it a few times before it will light.

Product features

Super Starter Kit for R3 Project

LAFVIN Super Start Kit not only contains r3 control board,but alsoincludes LED diodes,resistors,LCD1602,RFID module,Sound moduleover than 50 kinds of components and sensors. Which meet your de-mands for your different projects either it is simple or complex.

100% Compatibility with Official Software

The R3 is a microcontroller board based on the ATmega328.

It has 14 digital input/output pins (of which 6 can be used as PWM

outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection,

a power jack, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller; simply

connect it to a computer with a USB cable or power it with a AC-to-DC

adapter or battery to get started.

Detail Tutorial help you to learn electronics and programming

Don’t be nervous if you are a beginner.Our tutorial contains detailed

wiring diagrams,codes,libraries.Just follow our tutorial and step by

step you will come to realize that learning electronics is interesting.

There is connection diagram and code for each project, making it

easy for you to learn.

It’s the best choice and nice gift for your friends,family and kids to

learning electronics and programming.

1602 LCD Display Module

This is great LCD display compatible with arduino.

With limited pin resources, your project will quickly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.

If you already have I2C devices in your project, this LCD module actually cost no more resources at all. The address can be set 0x2.

74HC595 and Segment Display

Common anode 7-segment display Each segment of the display consists of an LED. So when you use it, you also need use a current-limiting resistor.

Otherwise,LED will be burnt out. In this experiment,we use a common cathode display. As we mentioned above, for common cathode display, connect the common cathode (COM) to GND. When the anode level of a certain segment is high, the segment is on; when the anode level of a certain segment is low, the segment is off.

LED and 830-hole Breadboard

LEDs are included in many lighting industries, the industrial community is depending more and more on LEDs.

In this lesson, a simple yet interesting experiment will be conducted, using LEDs to create flowing LED lights. As the name implies, these flowing lights are made up of six LEDs in a row which successively light up and dim one after another like flowing water.