13 best water cooling pump

Product description

The CORSAIR Hydro X Series XD5 RGB Pump/Reservoir Combo is ready to drive the world’s most demanding custom cooling systems, with a Xylem D5 PWM pump, built-in RGB lighting with a titanium matte white finish, and an included temperature sensor. Combine with a CORSAIR iCUE Controller (sold separately) and powerful CORSAIR iCUE to precisely control pump speeds, RGB lighting, and full system lighting synchronization.

• A high-performance Xylem D5 PWM pump controlled via PWM to deliver the perfect flow balance for your loop.
• Ten individually addressable top-mounted RGB LEDs light up your reservoir with stunning customizable RGB lighting. Add a CORSAIR iCUE Controller (sold separately) and powerful CORSAIR iCUE software to customize and sync RGB lighting across all your iCUE-compatible products including water blocks, fans, keyboard, and more.
• The integrated 330ml reservoir with an anti-vortex insert puts your custom cooling system’s coolant on display, with stunning angular design and an integrated fillport that makes filling, flushing, and topping-off coolant easy.
• A titanium matte white finish matches the modern aesthetic of other white CORSAIR products in your setup.
• Included temperature sensor provides real-time coolant temperatures from inside your cooling loop when connected to a CORSAIR iCUE COMMANDER PRO or COMMANDER CORE (sold separately).

User questions & answers

Question:	Can I use 1/2 fittings with this reservoir
Answer:	The fittings are the standard g 1/4, so no not without an adaptor. In my build I used a Thermaltake variant with 16mm acrylic tube. Lots of other fittings you can choose from. There was easy and pretty reliable for leaks.
Question:	What are the exact dimensions
Answer:	Hi Shaun_R, Outer dimensions of the unit without stop plugs or fittings installed: 113.5 x 113.5 x 58mm Stop plug (enclosed in the box) will add 3mm. Height of included fan bracket mounts (120 and 140 sizes): 10mm If you have any other questions please reach out: support.corsair.com
Question:	Can this mount to a fan mount
Answer:	Mounts for 140 and 120mm fan mounts are included
Question:	What size tubing can you use
Answer:	Hi Yousef, Size of tubing will be related to choice of fittings. XD5 RGB Pump/Reservoir supports fittings that use G1/4" BSPP port thread. It's a very common port thread used in custom cooling. CORSAIR suggest to use Hydro X Series XF line of fittings or comparable substitute. If you have any other questions please reach out: support.corsair.com

Product description

The CORSAIR Hydro X Series iCUE XH305i RGB Custom Cooling Kit contains all the premium CORSAIR components you need to build your very own custom cooling loop, turning your PC into a masterpiece with integrated RGB lighting while improving its performance. With everything from a CPU water block to a powerful pump/reservoir combo, the XH305i RGB is your ticket into the world of powerful Hydro X Series custom cooling.

• Make your PC a visual masterpiece with a complete Hydro X Series RGB hardline custom cooling kit, giving your system a stunning, distinctive look with only premium CORSAIR components.
• Easy and intuitive installation and setup, with the option for automated software control to set your fan and pump speeds to their lowest possible noise level while still keeping your system exceptionally cool.
• Dynamic, individually addressable RGB lighting integrated into the XC7 RGB CPU water block, XD5 RGB pump/reservoir, and QL120 RGB cooling fans gives your PC a striking look to stand out from the crowd.
• The XC7 RGB CPU Water Block combines premium nickel-plated copper construction and extreme cooling performance, compatible with Intel LGA 1200 and AMD AM4 sockets.
• Create stunning loops with XT Hardline Tubing, easily cut and bent to your needs using the included saw, bending mandrel, tube holder, and silicone insert and installed with the included XF Hardline Fittings and Adapters.

User questions & answers

Question:	Will this work for a li lian o11dynamic xl rog case
Answer:
Question:	Will this fit in the corsair icue 465x and a 3070 gpu
Answer:
Question:	How do i plug in the cpu block, rgb fan hub, and pump/reservoir if there is only two led ports on commander pro? where did yall plug them into
Answer:
Question:	Is this petg tubing or acrylic
Answer:

Product features

XC7 RGB CPU WATER BLOCK

The XC7 RGB CPU Water Block combines premium nickel-plated copper construction and extreme cooling performance, compatible with Intel LGA 1200 and AMD AM4 sockets.

XR5 360MM RADIATOR

Delivers extreme custom cooling performance, with a 30mm radiator thickness and premium copper core.

YOUR SETUP AT YOUR COMMAND

CORSAIR iCUE software enables complete control over your custom cooling loop. Create automated fan curves that adjust fan speeds based on your system’s thermals, and customize dynamic RGB lighting effects for the XC7 RGB CPU Water Block, XD5 RGB Pump/Reservoir Combo, and LL120 RGB fans.

Product description

LENX SC600 DC 12V PC Cpu Water Cooling System Tool Water Pump 132.09 GPH 10W Brushless Drive Water pump for Destop Computer Laptop computer



Specifications:

Power consumption:10W

Rated voltage: DC 12V

Rated current: 0.8A

Max flow rate: 500L/H (132.09G/H)

Max static head: 3m (9.8ft)

Diameter of inlet:Female G 1/4"

Diameter of outlet:Female G 1/4"

Lifespan: More than 50,000hrs

Power supply: DC electric source

Ceramic shaft + ceramic bushing

Speed:3000 RPM

Size:length 9 cm, height 8 cm, width 6cm.



NOTE:



1. Working at rated voltage (DC12V/0.8A). The positive pole is red wire, the negative pole is black wire,white wire is test wire.

2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)

3. When blocking, long-running is not allowed.

4. Preventing any hard particles entering the pumps.

5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden



Package:

1 X Water pump

• 132.09 GPH 10W 0.8A, perfect for CPU cooling system.
• G 1/4" input and output.
• High efficiency, low consumption, low noise
• High head, high flow, low noise.
• 100% brand new

User questions & answers

Question:	Which port is in, and which is out
Answer:	The port in the center is in and the port on the side is the out.
Question:	can I run this direct from a 12V power supply or battery of does it require the MB
Answer:	Yes, you can run it direct from the 12v power supply and bypass the motherboard. Most power supplies have extra leads coming out of them for accessories.
Question:	will this pump fit in a 60mm d5 pump mount/bracket? or what is the diameter of the round part
Answer:	The diameter is 45mm length is 60mm, not including intake connection
Question:	will the water flow through the pump if its not running
Answer:	Most likely yes! Almost all pumps will unless they have a check valve. You can install a one way check valve to be certain.

Product description

NOTE:



1. Working at rated voltage (DC 12V).

2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)

3. When blocking, long-running is not allowed.

4. Preventing any hard particles entering the pumps.

5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden



Features :



Power consumption :19W

Rated voltage: DC 12V

Max flow rate: 800L/H

Max static head: 5m (16.4FT)

Diameter of inlet: G 1/4"

Diameter of outlet: G 1/4"

Lifespan: More than 50,000 hrs

Power supply: DC electric source

Ceramic shaft + ceramic bushing

The Water Tank Size:length 110 MM, diameter 50MM.



Package:



1 X Water pump

1 X Water Tank

2 X G 1/4" TO 5/16"

1 X Pump Shockproof pad

1 X G 1/4" TO G 1/4"

2 X Stents

6 X Screws

• 800L/H 19W 12V water pump, perfect for CPU cooling system.
• Threaded connections: G 1/4" input and G 1/4" output.
• Water tank capacity: 86 ml.
• Head: max 5 Meter, Working life: 50000 hours
• 100% brand new and 1 year warranty.

User questions & answers

Question:	Are the fittings that this comes with copper and nickel
Answer:	Nickel
Question:	Does this product come with clamps to hold the tubing in place on the fitting
Answer:	Yes it comes with clamps

Product description

Flow: max 500 L/H

- Head: max 3 Meter

- Water Tank Capacity: 250 mL

- Power Connector: 3Pin connector

- Voltage: DC12V

- Power: 10W

- Noise: 16 DB

- Threaded connections: G 1/4 DN8 (6.35mm)

- Working life: 50000 hours

- SIZE:60x150mm

Package 100% Brand New 1 pc x Water Cooling DC Pump Tank 250ML F CPU CO2 Heat Exchanger Water Cooler 500 L/H

• 【Quiet 16 DB LOW NOISE】The max noise the water cooling pump tank could generate during work is 16 DB, so quiet and will not bother you
• 【Specification】Threaded connections: G 1/4" input and G 1/4" output,Power Connector: 3pin connector; Noise: 16 DB,Water tank capacity: 250 ml
• 【Flow Rate MAX 500 L / H】The max flow rate of the water cooling pump tank is 500 L/H, and max head is 3 meter
• 【Universal 3 PIN CONNECTOR】3-pin connector could be plugged into various devices, convenient to use. Please do not use voltage higher than dc 12 v
• 【Durable 50000 WORKING HOURS】The water cooling pump tank has a working life of 50000 hours, long service time

User questions & answers

Question:	In the picture I see two different sized tanks. Does it come with both
Answer:	No, just one. Also, don't try and take it apart. Don't think tank size really matters much anyway, unless you have a big volume of water in your system and a large temperature fluctuation.
Question:	Need wirring instrictions, please
Answer:	Sorry I cant be of help, this seller sent me a defective unit and failed to reply to my emails. Normally the red wire would go to a positive source lead and the black to the negative lead. I have no idea what the yellow wire is for.
Question:	can you switch to hard tube connectors
Answer:	It takes g1/4 fittings.
Question:	This probably has to be primed right
Answer:	Yes you do..it's slow flow but works I yous as a back up i

Product description

Specification:

Material: Acrylic + ABS

Model: PU-FS4-J

Rated current: 0.7A

Rated function: 8W

Pump head: 4 meters

Pump flow: 800L/H

Starting voltage: 7V

The highest voltage: 13.5V

No-load speed: 5000RPM

Load speed: 3000RPM

Size: Approx. 5.5 * 6.4 * 6.4 cm/ 2.2 * 2.5 * 2.5 in

Weight: about 285 g



Package list:

1 * Water Pump

1 * Rubber Mat

• Compatible with all standard water cooling system settings.
• Use universal G1/4 threaded pipe connection fittings.
• The RGB lamp mounting position is hidden on the back (RGB lights need to be purchased separately).
• Acrylic material, beautiful appearance.
• The interface is D port + 4 pin.

User questions & answers

Question:	How is the quality of it
Answer:	Its really well built and cycles a substantial amount of liquid.
Question:	The photo says rgb need to be purchased separately. what kind of rgb does it need
Answer:	I am not sure , I did not purchase the RGB for it.
Question:	Do I need to connect it to the mobo to operate or will it work with just the molex connection
Answer:	it will work with just molex but you cant control rpm's so it set to hi by default but it will work fine
Question:	Can the speed be adjusted if connected to the motherboard
Answer:	The speed can be adjusted when connected to the motherboard. Currently I am using two of them, one is connected to the motherboard and the other is connected to a fan controller. The one connected to the motherboard tends to speed up vs the one that is connected to the fan controller.

Product description

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 186 ml CO2 Cooler



Features :

Power consumption:19W

Rated voltage: DC 12V

Rated current: --------

Max flow rate: 600L/H (158.5GPH)

Max static head: 5m (16.4FT)

Diameter of inlet: G 1/4"

Diameter of outlet: G 1/4"

Lifespan: More than 50,000hrs

Power supply: DC electric source

Ceramic shaft + ceramic bushing

Speed:--------

The Water Tank Size:length 160 MM, diameter 50MM.



NOTE:



1. Working at rated voltage (DC12V).

2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)

3. When blocking, long-running is not allowed.

4. Preventing any hard particles entering the pumps.

5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden



Package:

1 X Water pump

1 X Water Tank

2 X G 1/4" TO 5/16"

1 X Water Block

1 X G 1/4" TO G 1/4"

2 X Stents

6 X Screws

• 158.5 GPH (600L/H) 19W, perfect for CPU cooling system.
• Threaded connections: G 1/4" input and G 1/4" output.
• Head: max 5 Meter, Working life: 50000 hours
• Water tank capacity: 186 ml,
• 100% brand new

User questions & answers

Question:	run from pump/reservoir to 240mm radiator then to gtx 1080 then to 120mm radiator then to the cpu block then to reservior. will this pump work
Answer:	This might not be enough to pump that much fluid. For the price of the kit. I would double up and put the GPU and CPU on separate loops.
Question:	Does it come with the water block because it says so in the description but the q&a says different
Answer:	It does not come with a water block. This is just the pump with a reservoir and some fittings. It also has the mounts.
Question:	Is this suposed to have a loud buzzing noise
Answer:	I have one but only ran it for a few hours so far - have not noticed any type of unusual load sound - very nice - it's not a high volume pump but works well enough to cool my 2.2kw spindle
Question:	What size tube connectors
Answer:	The compatible fitting size is G1/4 which is mostly standard nowadays.

Product description

The LC240E RGB incorporates Cooler Master's Dual Chamber Pump, 120 millimeter Fan, and RGB Controller to control the lighting effects. With its matt black styling, braided cabling and RGB lighting effects, the LC240E RGB is a Cooler Master original design and enables a colorful and great performing entry into liquid cooling. Reliability, performance and quiet operation are ensured by its unique Dual Chamber Pump and twin 120mm fan design. Whether you're building new or just upgrading, it's easy to install on the latest Intel or AMD systems and 240mm radiator fits many performance PC chassis.

• Liquid cooling system: The Cooler Master LC240E delivers efficient cooing with our dual pump 120 millimeter fans; It keeps your system running effectively, even in the high load times; Air flow: 66.7 CFM; Noise level: 31.5 decibels
• Dual chamber: Our low profile dual chamber pump delivers sizable performance leaps over last gen technology
• 120 millimeter fans: Silent cooling at an efficient rate
• Sleeved tubing: Reinforced FEP tubing to keeps the tube kink free and the liquid flowing to your CPU
• RGB controller: Allows you customize colors and light effects
• CPU socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	Would this work with a z370 sli slim motherbaord
Answer:	Yes, the z370 motherboard is a socket 115x so this CPU cooler will fit as long as there is a little space around the CPU socket (most should have more than enough space)
Question:	Does the cooler work on a mobo intrl lg1151 socket
Answer:	Hello Nicolas, Yes, this liquid cooler AIO should mount to an LGA 1151 socket without any issues. CM-PNguyen
Question:	Is the cooler's tdp actually 130w? the listed figure is very low compared to similar cooler master aios
Answer:	And now it’s 2020, still 130w tdp. 240 liquid cooling should be good for most 200-250 tdp chips, just swap the fan for an arctic or Noctua.
Question:	Hi, I have read alot of reviews saying the therr is a design flaw, Can the manufacturer guarantee that the plsstic tabs will not brake
Answer:	I owned three of these and all three had problems. The design flaw is the mounting bracket and the way it connects to the water pump. Under pressure the tabs will break and you must be vert careful when installing it. I have two break on installation and another pop after about 4 months of usage. I have built PC's for over 25 years, so I understand how to properly apply pressure when installing CPU coolers. I would wait until cooler master fixes this issue. Hopefully the next revision will have a better mounting system.

Product features

MasterLiquid LC240E RGB

MLLC240E RGB is a Cooler Master's original design, with its matte-black styling, braided cabling and RGB lighting effects for a colorful entry liquid cooling. Cool in any color as the RGB options extend to both fan and water block, all with six lighting effects from which to choose. Reliability, performance, and quiet operation are ensured by its unique Dual Chamber Pump and Dual 120mm MasterFan. Whether you're building new or upgrading, it's easy to install on the latest Intel or AMD system.

Dual Dissipation Pump

Our low-profile dual chamber pump delivers performance leaps over single-chamber pump designs.

Double FEP Tubing

FEP makes for durable yet flexible tubing, while the mesh outer sleeve creates a premium look.

Low-Resistance 240 mm Raditator

Beautifully designed to maximize cooling surface area.

Library Quiet

Built sturdy, keeping vibrations and rattle to nearly inaudible levels.

Product description

Specification:

Type: Water Pump

Voltage: 12V DC, large 4P / small 3P plug

Current: 0.8A

Power: 10W

Lift: 4 meters

Flow rate: 500L/H

Material: Acrylic + Plastic

Thread: G1/4

Inlet and outlet: 1/4 internal thread, Thread Coupling is NOT included

Weight: Approx. 290g

Size: Approx. 5 * 5 * 7.8cm /  2 * 2 * 3.1in

Package size: Approx. 13.5 * 8.5 * 9.5cm / 5.3 * 3.3 * 3.7in



Package list:

1 * Water Pump



Note:

Please allow slight error due to manual measurement. Thanks for your kind understanding.

• G1/4 thread water pump for computer CPU water cooling system.
• Noiseless water cooling pump - Ultra-quiet operation won't disturb you.
• Made of high-quality acrylic and plastic, ensure a long service life.
• Stable performance with high flow rate( 500L/H)
• Easy to install and use.

Product description

Specifications:

Material: PMMA + POM + Anode Aluminum

Color: Black + Transparency

Tank length: 110mm, 160mm, 210mm, 300mm (Optional)

Hole site: G1/4 Thread

Rated current: 0.8A

Rated power: 19W

Water pump flow: 800L/H

Starting voltage: 12V

Maximum voltage: 13.5V

Power interface: big 4pin, small 4pin

Overall Length: Approx. 19.5cm / 7.7in 

                                     or 24.5cm / 9.6in 

                                     or 29.5cm / 11.6in 

                                     or 38.5cm / 15.1in

Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)

Weight: Approx. 557-640g



Package List:

1 * Water Tank and Pump

2 * Plastic Buckle

2 * Metal Buckle

1 * Bag of Screw and Nut

• The water tank is integrated with the water pump for easy installation and a more beautiful appearance
• The water cooling tank features thick pipe wall, which can sustain the tremendous pressure
• The pump is waterproof and durable, ensuring a long service life
• Inlet and outlet interface: G1/4 thread
• Heat-resistant acrylic tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable

User questions & answers

Question:	Does this product include fittings or connectors and clamps
Answer:	All fittings and clamps are included - I did choose to replace the clamps to something stronger.
Question:	Does this have rgb built in or should I just buy some
Answer:	I am sorry. To me RGB means Red, Green, Blue. I do not know how that applies to a pump. If you are asking if the pump is illuminated then No it is not.
Question:	what diameter hose is needed
Answer:	any size - just need to know inlet and outlet ends

Product description

Description:

This computer pump adopts high speed flow up to 800L/H and long pump head up to 4 meters to achieve fast heat dissipation, thus creating a stable and smooth internet connection and lengthening the service life of computer. The integrated design of water tank and pump makes it easy and convenient to install, and gives a more concise appearance.

Specifications:

Product type: Computer Water Pump

Rated current: 0.7A

Rated power: 8W

Pump head: 4 meters

Pump flow: 800L/H

Starting voltage: 7V

Max. voltage: 13.5V

Thread: G1/4 thread

Total length: 12cm/ 4.72in, 17cm/ 6.69in for your choice

Color( optional): Black, white

Package size: approx. 22 * 9 * 9 cm/ 8.66 * 3.54 * 3.54 in

Package weight: 617g

Package List:

1 * Computer Water Pump

2 * I-shaped Fasteners

2 * Glue Circles

2 * Plastic Fasteners

1 * Mat

• 800L/H flow speed makes heat dissipation highly efficient.
• 4 meters pump head gives a very strong and powerful heat dissipation.
• Integrated design of water tank and pump makes installation very convenient.
• Multi-level protection makes sure a safe operation.
• LED power indicator tells the power-on state.

User questions & answers

Question:	Does the 4 pin plug into the sys fan header on my motherboard
Answer:	/Duration 0:51Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:51 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Yes,the Ginkin outdoor water pump filter can effectively removes 99.9999% chlorine, heavy metals, chemical pollutants, sediment, and other particles.
Question:	Why are there two holes in the top of the resivoir
Answer:	Only One filter,can be replaceable
Question:	will this unit mount to 120mm fan
Answer:	/Duration 0:18Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:18 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Sure,our 5-Stage water filter pump can remove visible suspensions,sediment,large objet particles ,small impurities,solid particles,and most warebrone worm eggs and floating materials,filter out sediment,heavy metals and bad odor,removes small impurities,solid particles,and most warebrone worm eggs,removes 99.9999% impurities.
Question:	Why are there two different plugs
Answer:	No,I haven't smell bad yet,it's good and convenient

Product description

Specification:

Material: Acrylic + ABS

Model: PUB-ST1000

Capacity: 890ML

Rated voltage: 12V DC

Input current: 1.5±10%

Motor operating speed: 4500 RPM ± 5%

Head: 6±1M

Flow rate: 1200L/H

Power: 18W

Interface: D port, big 4 pin, small 3 pin (speed interface)

Size: Approx. 20 * 12 * 10 cm/ 7.9 * 4.7 * 3.9 in

Weight: about 1048 g



Package list:

1 * Water Pump Water Tank

• Innovative split design for easy installation and maintenance.
• The pump body adopts SC 1000 head and high flow rate.
• The water tank has a large capacity and can accommodate 890ML.
• With manual adjustment knob.
• With a shock pad to reduce the noise caused by vibration.

• COOLER THAN OTHER AIO WATER COOLERS: The ARCTIC Liquid Freezer II has a more efficient cool plate, pump and radiator that makes a difference among other AIO water pc fan coolers
• 15°C LOWER VOLTAGE REGULATOR TEMPERATURE: An additional 40 mm VRM fan (PWM controlled) next to pump can provide extra cooling for the base and voltage transformer
• INTEGRATED CABLE MANAGEMENT: The PWM-cable of the fans are integrated into the sleeved tubing. Thus there is only one short cable visible from the pump to motherboard replacing the usual cable mess
• 80% LESS POWER CONSUMPTION: Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise If no cooling is needed
• MAINTENANCE-FREE WATER LOOP: The water loop is sealed and with high quality fiber-reinforce EPDM tubing you do not have to worry about refilling

User questions & answers

Question:	Are the fans arranged for exhaust or intake? Do they push or pull air through the radiator
Answer:	The hose is 3/16" ID (inner diameter), 5/16" (outer diameter) food-grade silicone tubing. It can be found on Amazon, Ebay or online. A brand called Venair makes Veno Technoex tubing and it is a drop in replacement, if not better quality. Other brands are SILCON, Tygon, US Plastics Corp. If you see platinum cured tubing as advertised it is better than peroxide cured versions for preventing any kind of build up in the tube, it is supposed to have a far smoother inner surface. Averages $1.30/foot. Can be ordered via McMaster-Carr or in my case I found it locally at Canal Rubber in NYC. You would be best served actually calling some brick and mortar commercial plumbing supply stores and asking first rather than swimming around online as this product is used commonly in food service and a brick and mortar counter is likely to cut you 10' no problem. Do NOT use vinyl or other types of tubing other than FDA graded Food Grade silicone tubing.
Question:	The cooler did not come with the am4 screws!! I now have a processor full of thermal paste and can’t mount it. How can i get these screws
Answer:	No their will be no problem with no keeping it dry for a few days. as long as the filtration system is in use it will not have enough time for mold or any other fungus to build up on the filter. though I would suggest thoroughly cleaning the system to msr specific instructions at the return and storage of the unit.
Question:	Will this work well with a ryzen 7 2700x and a x570 p motherboard
Answer:	yes it fits msr bags also nalgene steel bottle (1778 1002) the top is the same size to match pump also ok for use with fire/stove
Question:	Can you do a push pull config? In that case, is the included screws long enough to install on the case
Answer:	This will NOT remove Cryptosporidium. Go to CDC.gov. A 1 micron absolute hollow fiber filter will allow 20%-30% of spores to pass through. You want a filter less than 1 Micron. Get an absolute Ultrafiltration 0.05 microns removed. This will filter Ebola out of the water. Add Chlorine Dioxide if you are not in survival mode. The chlorine is not activated, it is what they use in our municipal pile water systems. A Guide to Water Filters | Cryptosporidium | Parasites | CDCThe absolute 1 micron filter will more consistently remove Cryptosporidium than a nominal filter. Some nominal 1 micron ... and certified should have wording on their labels indicating they have been listed and labeled to NSF/ANSI Standard 53 or Standard 58 for ... Carbon filter; Water ...Search domain www.cdc.govcdc.gov/parasites/crypto/gen_info/filters.html

Product features

Efficient, in-house developed pump

Unlike many of our competitors, we went to great lengths to develop the water pump. The result is greatly reduced humming and higher efficiency. Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of of 0.7 W at no load, 2.1 W under normal load and a maximum of 3.4 W under full load for the entire AiO.

Premium class radiator

Unlike most other all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.

Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 ° C lower temperature increase in the temporary turbo mode of modern CPUs.

Smooth VRM fan

Small fans have a reputation for being particularly loud and not very durable. However, we have developed a quiet and durable diagonal fan especially for the Liquid Freezer II and are 100% convinced that this 40 mm fan is just as durable as our other case fans. In the unlikely event that it should fail, ARCTIC will send you a replacement free of charge and easily, without a need to replace the entire unit.

The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by over 10 ° C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.

High quality hoses with integrated cable management

The fiber-reinforced, long EPDM tubing of the Liquid Freezer II enables installation even in large cases and effectively prevents the cooling liquid from evaporating, so that you do not have to worry about refilling the compact water cooling system.

It also hides the cables of your radiator fans thanks to sophisticated cable management. So you only have to connect a plug to the mainboard, saving valuable time during installation. In the end, you won't need to hide any more cables and your view is reduced to just the essentials.

Size & Weight

Radiator: 317 x 138 x 38 mm

Pump (w/o tubes) 98 mm x 78 mm x 53 mm

Tube Diameter: Outer: 12,4 mm // Inner: 6,0 mm

Tube Length: 450 mm

Weight: 1572 g (Fan, Radiator, Pump, Tubes)