13 best liquid cooling

Product description

CoolerMaster MasterLiquid ML240L RGB V2 is a refreshed design from the popular MasterLiquid Lite Series that elevates the exterior design elements The Pump of the ML240L RGB V2 has been enhanced with the newly designed 3rd Gen Dual Chamber Pump that improves the overall cooling efficiency of the AIO water cooler The radiator surface area has been enlarged to increase the surface area for heat dissipation for optimized cooling performance The ML240L RGB V2 will included the latest SickleFlow 120 RGB fan with a brand new design and Air Balance fan blades that is quieter than before without compromising on air flow and pressure.

• 3rd Generation Dual Chamber Pump for overall cooling efficiency and performance
• New SickleFlow Refreshed exterior design for improved lighting and fan blades for a quiet airflow performance
• RGB Lighting Signature cooling performance with an RGB design for all of the users wanting lighting effects that are fully customizable
• The larger surface area increased the surface area of the fins on the radiator for better heat dissipation
• Industrial grade seal high: Industrial Grade EPDM material to strengthen the seal for improved longevity and Anti-Leaking
• Controller: Included a wired RGB Controller
• CPU socket support: LGA2066, LGA2011-v3, LGA2011, LGA1200, LGA1151, LGA1150, LGA1156, LGA1155, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	Would this work with a z370 sli slim motherbaord
Answer:	The power button is a simple switch. It will click when pressed. CM-PNguyen
Question:	Does the cooler work on a mobo intrl lg1151 socket
Answer:	Yes with the aRGB header plugged into the motherboard - you can use your motherboard RGB software to turn off the fan lights.
Question:	Is the cooler's tdp actually 130w? the listed figure is very low compared to similar cooler master aios
Answer:	Yes there is. 2 x 120mm / 2 x 140mm / 1 x 200mm -CM Myke
Question:	Hi, I have read alot of reviews saying the therr is a design flaw, Can the manufacturer guarantee that the plsstic tabs will not brake
Answer:	Because 200mm fans don't have to spin very fast in order to move a lot of air they're actually pretty quiet. I don't believe the RPM on them can get very high either so even at full speed they'd still be pretty quiet compared to a smaller fan that has to spin at a much higher RPM to get the same amount of airflow.

Product features

MasterLiquid ML240L RGB V2

ML240L RGB V2 is a total refresh of the popular Lite Series. The pump has been enhanced with the newly designed 3rd Gen. Dual Chamber design, improving the overall cooling efficiency of the AIO water cooler. The radiator surface area has been increased for heat dissipation and optimized cooling performance. The latest SickleFlow120 RGB fan is included with a brand new design and Air Balance fan blades that is quieter than before without compromising on air flow and pressure.

New Dual Chamber Pump

3rd Generation dual chamber pump designed for better performance and overall efficiency.

Included Wired RGB Controller & Splitter

Allows you customize colors and light effects.

Double Tubing

FEP makes it durable yet flexible. Sleeved tubing on the exterior to give it a premium look.

Product description

The CORSAIR iCUE H150i ELITE CAPELLIX Liquid CPU Cooler delivers powerful, low-noise cooling for your CPU, with a 360mm radiator and three CORSAIR ML120 RGB PWM fans controllable between 400 RPM and 2,400 RPM. 33 Ultra-bright CAPELLIX LEDs on the pump head and eight RGB LEDs per fan put the spotlight on your cooling

• A high-performance RGB pump head provides powerful, low-noise cooling for your CPU, lit by 33 ultra-bright CAPELLIX RGB LEDs
• Includes a CORSAIR iCUE Commander CORE Smart RGB Lighting and Fan Speed Controller, for precise speed and lighting control over up to six RGB fans
• Three 120mm CORSAIR ML RGB Magnetic Levitation PWM fans deliver powerful airflow for extreme CPU cooling performance, with eight RGB LEDs per fan
• Accurately control your cooling via PWM, adjusting fan speeds from 400 to 2,400 RPM
• Zero RPM fan profiles in CORSAIR iCUE software allow fans to stop entirely at low temperatures, eliminating fan noise
• Compatible Sockets: Intel LGA 1150, 1151, 1155, 1156, 1200, 1366, 2011, 2011-3, 2066 and AMD AM2, AM3, AM4, FM1, FM2, sTR4, sTRX4

User questions & answers

Question:	How many watts does it use
Answer:	These markers would most likely bleed through standard Bible pages - it might be better to choose a colored pencil to prevent page transfer.
Question:	Does it come with light controller
Answer:	I USE IT ON MY VINYL FOLDERS AND THEY NEVER SMEAR. I WOULD RECOMMEND A HIGHER POINT LIKE MEDIUM OR JUST FINE. ULTRA FINE IS REALLY THIN.
Question:	Does this have the Asetek pump or the Coolit pump
Answer:	How is it that people are saying years when on more than a few occasions I'd be at Staples and get a 10 or 12 pack and use it once or twice and then a month or so later it's dried out. Before anyone asks, yes I always put the cap on the marker as I'm OCD about those types of things. Weird thing is the unopened markers were also dried out. If I buy these now and 9 months later they are all dried out an I only used 1 marker will DYMO or Amazon refund my money? Sick of buying these when they always dry out.
Question:	Is this the newest aio cooler that came out? i could just search it up but I need an official answer
Answer:	The Sharpie Permanent Ultra Fine Tip Markers are not manufactured or guaranteed for use on cloth. The Sharpie Marker manufactured for use on clothing is the Stained by Sharpie Fabric Marker.

Product features

SPLIT-FLOW COPPER COLD PLATE

An optimal cold plate design and a high-density stack of 128 micro-skived fins-per-inch provides highly efficient cooling at all loads.

MAGNETIC LEVITATION RGB FANS

CORSAIR ML RGB Series PWM fans deliver powerful airflow for extreme CPU cooling performance, with eight RGB LEDs per fan.

AVAILABLE IN THREE SIZES AND PERFORMANCE LEVELS

240mm (H100i) for great compatibility, 360mm (H150i) for high cooling performance, and 280mm (H115i) for a great mix of both.

Product description

ROTATABLE Cap Mount the cold plate at any orientation, turn the cap up to 270 degrees to keep it upright. RADIATOR PUMP DESIGN The pump has been integrated into the radiator for sound dampening and noise reduction. PUMP MOTOR RESONANCE ELIMINATION A durable three phase motor at the core of the pump generates minimal vibrations for long-lasting operation

• TIMELESS RELIABILITY - The motor ceramic bearing has been designed to stand up to 100,000 hours of life expectancy.
• TOTAL RGB FAN CONTROL The included RGB fans support custom speed with PWM fan and customizable lighting through software.
• ROTATABLE CAP - Mount the cold plate in any orientation, turn the cap up to 270 degrees to keep it upright.
• RADIATOR PUMP DESIGN - The pump has been integrated into the radiator for sound dampening and noise reduction.
• Compatible Socket & CPU: Intel LGA1150/1151/1155/1156/1200, LGA1366, LGA2011, LGA2011-3, LGA2066 / AMD AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2, TR4
• Compatible devices: Desktop

User questions & answers

Question:	I connected the 3 pin header to motherboard that have jrainbow connector but there still no light on the coller
Answer:	You need to use the msi mystic light software to control the LEDs
Question:	will this work on a ROG Crosshair viii hero mother board
Answer:	Yes it will. I use it on mine.
Question:	Does this work with the msi z390 a pro motherboard seeing that it has a 4pin rgb header or what not
Answer:	If your has the 4 pin header, that is 12 volt RGB header. This unit I believe is set up for the 5 Volt 3 pin ARGB header. NOT COMPATIBLE AT ALL.
Question:	Does it come with thermal paste or do I have to buy that separate
Answer:	It comes with Thermal Paste, but the one I got was junk. It was hard and not usable

Product features

EVAPORATION PROOF TUBING

Constructed with three layers of netted plastic tubing and a reinforced mesh exterior.

RADIATOR PUMP DESIGN

The pump has been integrated into the radiator for sound dampening and noise reduction.

PUMP MOTOR RESONANCE ELIMINATION

A durable three phase motor at the core of the pump generates minimal vibrations.

HIGH THERMAL DISSIPATION

A split pathway through the radiator rapidly dissipates heat.

EXTENSIVE COMPATIBILITY

Intel: LGA 1150, 1151, 1155, 1156, LGA1200, LGA1366, LGA2011, LGA2011-3, LGA2066

AMD: AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2, sTR4, sTRX4, SP3

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on Intel LGA2066 motherboard. Similar steps for LGA2011, LGA2011-3 socket motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on AMD sTRX4 motherboard. Similar steps for sTR4, SP3 socket motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Step-by-step videos provided by MSI demonstrate the MAG CORELIQUID Series secure installation procedure for a number of Intel and AMD motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on Intel LGA1200 motherboard. Similar steps for LGA 1150, 1151, 1155, 1156, 1366 socket motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on AMD AM4 motherboard. Similar steps for FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2 socket motherboards.

Product description

The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X Series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year.

• Design: With a re-designed cap and larger infinity mirror ring LED, the new Kraken X allows for adjusting the orientation of the pump head to fit without affecting the direction of the logo
• Bigger And Brighter: 10% bigger infinitty mirror cap allows for more vivid RGB and a rotating cap accommodates re-orienting the logo no matter the direction the cooler is installed
• Better Control: Full CAM integration allows you to manage your Kraken’s performance with precision
• Incredible Performance: The Aer P radiator fans feature a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance
• Simple Installation: Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling
• Compatible Socket & CPU: Intel Socket LGA 1151, 1150, 1155, 1156, 1366, 2011, 2011-3, 2066 / AMD Socket AM4, TR4(bracket not included)

User questions & answers

Question:	Does the software collect information from my computer and send it over the internet
Answer:	You find the specs of the case at coolermaster.com
Question:	will this cooler fit inside a nzxt 710 mid tower
Answer:	You would need to get a Universal Vertical GPU kit in order to do that in this case. It does not in it's stock form. CM-PNguyen
Question:	Does the newest z73 version come with an am4 bracket? the description isn’t clear with which bracket is not included
Answer:	My lights took a bit to figure out. You need to plug the fan and light stuff into that board on the right side (when facing front of case) inside the door. Then give that thing power from your PSU. Then I think you hook up the wire FROM that board into your motherboard. I had it working perfect for a while, but at some point my lights came on and stuck that way. I will fix it eventually, but I have a feeling the lights on this thing are kind of hit or miss. I personally don’t like the lights so I don’t really care much. Oh and there is a button on the top front on the right side that controls the lights. It’s actually an up/down dual button thing. If you hold it for like less than 10 seconds it should toggle it on or off. The up/down toggles through built in modes/colors. I think the top most option is what allows your motherboard to actually control it, but it may be the bottom most, not 100% sure. Check the cooler master pdf of the instructions to see a picture of how that board should work. Do the same for your motherboard to see where to connect the fans and lights. Good luck.
Question:	is thermal paste included
Answer:	I didn't really have an issue.

Product features

Kraken X Series

The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling.

BIGGER AND BRIGHTER

A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.

BETTER CONTROL

CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.

INCREDIBLE PERFORMANCE

RGB channel easily integrates with any RGB accessory, including AER RGB 2 fans.

Product description

The Corsair Hydro Series H115i RGB Platinum is an all in one liquid CPU cooler with a 280mm radiator and vivid RGB lighting that's built for extreme CPU cooling. Equipped with 24 individual RGB LEDs H115i RGB Platinum offers a wealth of RGB lighting options via Corsair iCUE software. Two Corsair ML PRO RGB 140mm PWM fans run between 400 to 2,000 RPM, alongside an optimized cold plate and pump design that delivers the best ever Hydro Series cooling. Easy to install and compatible with all major CPU sockets, the H115i RGB Platinum pairs killer looks with chiller performance. ntel Processors Supported Core i9 Core i7 Core i5 Core i3 Pentium Celeron

• Two 140 millimeter ML PRO Series RGB magnetic levitation PWM fans deliver a blast of color and improved airflow for extreme CPU cooling performance; The fan airflow is 97 CFM and the noise level is 37 dBA
• 16 Individually controlled RGB LEDs light up the pump head to produce stunning, customizable lighting effects to match your build; Fan Speed is 2000 RPM.Cold Plate Material:Copper
• Corsair iCUE software allows you to control your cooler’s RGB lighting, monitor CPU and coolant temperatures, and adjust fan and pump speeds, all from a single intuitive interface
• Thermally optimized cold plate and low noise pump design for high performance, quiet cooling; Radiator Material:Aluminum
• Compatible Sockets: Intel LGA 115x, 1366, 2011, 2011 3, 2066 and AMD FM1, FM2, AM2, AM3, AM4, TR4

User questions & answers

Question:	Does it come with fans
Answer:	Yes. It includes 2 RGB LED fans.
Question:	what asetek pump is in the corsair h115i rgb platinum
Answer:	It is not the Asetek. The manufacturer is Cool-it according to some online videos... They noted that the water tubing has a smaller diameter than the ones used by Asetek...
Question:	Do i install the fans facing the inside of the case or facing the front of the case with the radiator facing the inside for intake
Answer:	Depends on your case, where you install it and the flow from your other fans. Mine is in the top of my NZXT H710i case and would only fit one way - as an exhaust fan. Research shows the cooling effectiveness is pretty much the same regardless of whether the fans are oriented for intake or exhaust. In my case, I have 3 strong fans on the front for intake, 1 in the back for exhaust, and the radiator/fans in the top for exhaust. My temps are typically in the 40s to mid 50s (under load).
Question:	Does it work for socket
Answer:	It does not work with my 115x board. Be careful and some other peoples if you use the search function for the faq.

Product description

Thermaltake Pacific C360 DDC hard tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six C-Pro G14 PETG 16mm OD compressions, eight v-Tobler PETG tubes, an a RGB LED controller, and other accessories. p/N: cl-w243-cu12sw-adimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block - Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings - Pacific C-Pro G14 PETG 16mm OD compression - Black x6- Pacific G1/4 90 degree adapter - Black x2coolant- Thermaltake T1000 coolant pure Clear x1tube- V-Tobler PETG tube 16mm OD 500mm x 8accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1- silicone insert x1. Do not let the pump run dry, when there is no liquid entering the pump turn off your power immediately

• Analog/digital lighting: Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller; Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
• All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
• Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch; This radiator's 27mm thick design assures fitment compatibility with most form Factor chassis
• C pro fittings build like a Pro with a new take on compression fittings Engineered with 4 Built in O rings to provide maximum leak prevention and a secured compression seal
• Exclusive components: W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo
• 2 years

User questions & answers

Question:	can this cool a evga rtx 2080 ti hydro and intel i9-10920x with base components? And hopefully fit in a Thermaltake A500 case
Answer:	yes of course
Question:	Can this watercool a cpu and gpu at the same time with an am4 socket and amd radeon rx5700xt waterblock.does it fit in the deepcool matrexx
Answer:	It cools my 3700x and RTX 2080 ti very well. Although I don't have anything overclocked right now. So it should handle that setup fine. The case shows that you can mount the radiator on either the front or the top of the case perfectly fine.
Question:	Will this system work with a 480mm thin(27mm-35mm) radiator
Answer:	Yes, it will work fine. I eventually switch the radiator it came with for two 360mm x 64mm radiators and even added a gpu block without issue.
Question:	does it come with a silver coil or any type of contamination prevention
Answer:	yes , its came with silver coil

Product features

Sync With 5V ARGB Motherboards

Control fan and water block lighting through ASUS Aura, Gigabyte RGB Fusion, MSI Mystic Light,and ASRock Polychrome.

Pacific PR15-DDC Pump/Reservoir Combo

A 200ml long reservoir and a powerful DDC pump. Made with POM and PMMA, the PR15-DDC can sustain the maximum pressure up to 21.75 PSI.

Product description

The Hydro Series H60 is an all in one liquid CPU cooler with a 120mm radiator built for low noise liquid CPU cooling and bold styling with a white LED lit pump head. Compatible with all current AM4, LGA 1151 and LGA 2066 socket CPUs and equipped with a Corsair 120mm SP Series PWM fan, users can adjust the fan speed between 600 RPM to 1,700 RPM for precise control over noise and airflow. A high density 120mm slim radiator provides greater surface area for superb heat dissipation, while a thermally optimized copper cold plate and low noise pump ensure heat is quietly and efficiently channeled away from your CPU. With tool free easy installation and Corsair engineered cooling, the H60 is everything you need to keep your CPU running fast, cool and quiet. Fan Static Pressure: 2.08 mm-H2O.

• Precise PWM Control: Dynamically adjust fan speed between 600 RPM to 1,700 RPM with a 120 millimeter Corsair SP Series PWM fan, making it easy to minimize noise or maximize airflow
• 120mm High Density Radiator: Experience lower CPU temperatures with a 120mm high density slim radiator
• LED Illuminated Pump Head: White LED lit pump head adds a touch of brilliance to any system build. Fan Airflow 57.2 CFM. Noise Level 28.3 dBA
• Efficient Cold Plate and Pump: Thermally optimized cold plate and low noise pump design for more efficient, quieter cooling; Radiator Material: Aluminum
• Easy to Install: Modular tool free mounting bracket for quick and easy installation onto all current AM4, LGA 1151 and LGA 2066 socket CPUs
• NOTE: Refer user manual before use

User questions & answers

Question:	How does the thermal paste that it comes with compare to arctic silver 5? should i remove the included paste ad apply that instead for greater cooling
Answer:	Technically it should, but not recommended. -CM Myke
Question:	Will this work with 1151 motherboards
Answer:	There 3 pin.but it comes with 3 pin to 4 pin connectors.they thought of everything to give you.nothing will stop you from getting this case.:-) its awesome!!
Question:	does it fit on fm2+ socket? specifically MSI A88XI AC Mini ITX D board.? thank you
Answer:	It can fit a GTX 980 Ti. Most 750Ti's I've ever seen, in-fact all of them, have been shorter than the mainboard. So you'll have more than enough room...though why not go N200 and mATX if you're going for a small and low powered GPU? I've fit a 980Ti in an N200 as well. Hope that helps!
Question:	does this work with am3+ processors
Answer:	MAYBE!If the mother board is an ATX and has horizontal connector on the front edge than NO! the N400 has a recessed motherboard tray, that blocks horizontal connectors on an ATX board.!Amazon should put a warning in their description!WHY CoolerMaster?

• 【Better Heat Dissipation】The CPU water cooler equipped with 240mm radiator and 2x120mm PWM fans to make sure excellent heat transfer from CPU.
• 【RGB Lighting】RGB lighting on the pump and fans are adjustable to match your PC build.
• 【PWM Fans】Dual 120mm RGB PWM fans deliver a blast of color and improved airflow for extreme CPU cooling performance. Max. Air Flow: 62CFM; Noise Level: 18～26.4dB(A)
• 【Two-way RGB Control】The RGB lighting can sync with the motherboard, a wired RGB controller is included for non-RGB motherboards for customizing colors.
• 【Compatibility】Intel LGA2066/2011/1366/1151/1150/1155/1156/1200 & AMD AM4

User questions & answers

Question:	How long are the hoses on the 360? Long enough to front mount with hoses down
Answer:	They should be long enough. Mine is mounted front with hoses down, and I have a Full Tower case.
Question:	would this need maintenance in the future? Im not sure how water coolers work
Answer:	Yes it will but with the way it’s designed it’s a little difficult to change the liquid out especially if your new to water cooling. I would recommend to check temperatures if it’s higher than than 50-60 Celsius under load and 70-80 with load then would either replace the thermal compound with a new layer if temps don’t change then would recommend to replace the whole thing
Question:	Does this work with intel i7 10th gen (lga
Answer:	Yes, it can work with the LGA 1200 socket.
Question:	What's the RPM on the fans
Answer:	Fan Speed: 700～1500±10%RPM

Product features

ZOOMFLOW 240X SNOW

The ZOOMFLOW 240X SNOW is an all-in-one RGB liquid CPU cooler with a 240mm radiator built for cpu cooling.

RGB Lighting

The special design with an Addressable RGB LED pump head and two RGB cooling fans are adjustable to match your PC build.

Sync with Motherboard

Color option can be controlled through the RGB controller in the package for motherboards without ARGB header .

Dual Addressable 120mm RGB Fans

The dual 120mm PWM fans deliver improved airflow and produce 18～26.4dB(A) of noise when using. Vibrant RGB fans produce vivid lighting effects to match your build.

240mm Radiator + Flexible Tubing

It come with 240mm radiator to ensure excellent heat dissipation. The premium sleeved tubing makes it durable yet flexible to give it a premium look.

Better Heat Transfer

With the bigger pushing motor, the pump cam push more water flow as to take the heat away more quickly.

Featuring the ARGB lighting inside to match your PC build.

Product description

Introducing the Floe AIO Ring RGB 360 TT Premium Edition, the world's first 16.8 million color liquid CPU cooler with three 120mm Ring Plus RGB fans and RGB LED water block. Go with the floe for today's CPU cooling demands to provide extraordinary performance and superior quality. Supporting a 360mm Radiator space design combined with the Ring Plus 120mm fans and matching RGB LED pump, take color customization to the next level with multiple modes and 12 individual addressable LED controlled via software from your PC to your mobile device. Enjoy better cooling performance with greater CPU protection and go with the floe! 3 year warranty.



"Good cooling. Extremely low noise. Highly configurable LED controls.....Expandable RGB systemThermaltake’s Floe Riing RGB 360 TT Premium Edition provides the ultimate combination of RGB configurability, good cooling, and low noise." - Tom's Hardware Editor's Choice Award

Introducing the Floe AIO Ring RGB 360 TT Premium Edition, the world's first 16.8 million color liquid CPU cooler with three 120mm Ring Plus RGB fans and RGB LED water block. Go with the floe for today's CPU cooling demands to provide extraordinary performance and superior quality. Supporting a 360mm Radiator space design combined with the Ring Plus 120mm fans and matching RGB LED pump, take color customization to the next level with multiple modes and 12 individual addressable LED controlled via software from your PC to your mobile device. Enjoy better cooling performance with greater CPU protection and go with the floe! 3 year warranty.

Received Tom's Hardware Editor's Choice Award

"Good cooling. Extremely low noise. Highly configurable LED controls.....Expandable RGB systemThermaltake’s Floe Riing RGB 360 TT Premium Edition provides the ultimate combination of RGB configurability, good cooling, and low noise." - Tom's Hardware

Received Tweaktown's "Must Have" Editor's Choice Award

Scored 97/100 according to Tweaktown

"The Thermaltake Floe Riing 360 TT Premium RGB AIO Cooler is a top tier product, which attempts to deliver everything possible, and does a damn fine job with what is offered." - Tweaktown

"If we were on the hunt for a new AIO, our money would be going to Thermaltake and this round of AIO's. There just isn't anything better on the market right now." - Tweaktown



Radiator: Dimension:393 x 120 x 27 mm

Compatibility : Intel LGA 2066/2011-3/2011/1366/1200/1156/1155/1151/1150 AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.

Water Block: Material:Copper



Pump

Rated Voltage:12 V/ 5V

Rated Current:0.325 A / 0.4A

Motor Speed:3600 R.P.M



Fan

Dimension:120 x 120 x 25 mm

Speed:500~1400RPM

Noise Level:19.8 ~ 24.7 dB-A

Rated Voltage:12 V

Max. Air Flow:14.2~42.34 CFM

Max. Pressure:0.17~1.54 mm-H2O

Connector:5 pin



Tube: Length:326 mm

Material:Rubber

Weight: 1610g

• Supports Intel LGA 2066/2011 3/2011/1366/1200/1156/1155/1151/1150
• Supports AMD TR4/AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket)
• Patented Ring Plus RGB Software Enabled : Changes the light modes, colors, speeds, brightness, fan speeds, and even supports AI voice control in iOS and Android devices
• 12 Separately Controlled RGB LEDs for unrivaled Lighting Control.Rated Voltage:12 V/ 5VRated Current:0.325 A / 0.4AMotor Speed:3600 R.P.M
• 360mm High Efficiency Radiator with Push/Pull Mounting Support.For desktop:Requires TT RGB PLUS Software 1.1.5 version or later,For iOS:Requires iOS 10.0 or later,For Android:Requires Android 6.0.0 or later with screen resolution 1920 x 1080
• High Performance Waterblock and Durable Sleeved Cable
• Features RGB of Speed: 500~1400RPM , Noise Level :19.8 ~ 24.7 dB , Rated Voltage:12 V Max

Product features

Floe Riing RGB TT Premium Edition All-in-One Liquid Cooling System CPU Cooler

The Floe Riing RGB TT Premium Edition is the world’s first 16.8 million colors liquid CPU cooler with 120mm Riing Plus RGB fans and a LED waterblock. This cooler series features its extraordinary performance and superior quality. The large surface radiator plus high-performance waterblock and pump guarantees ultimate CPU cooling. Besides, the waterblock and the fans are manufactured with multiple addressable LEDs that can be controlled by Riing Plus RGB Software. Functions within the software also allow users to monitor fan performance and track CPU temperature. Enjoy better cooling performance and greater CPU protection with one simple upgrade.

Patented Riing Plus RGB Fan

High-static pressure fan with patented 16.8 million colors LED ring and 12 addressable LEDs, the Riing Plus RGB utilizes compression blades, hydraulic bearing and can be controlled by the patented Riing Plus RGB Software and exclusively designed mobile app.

Exclusive LED Waterblock with High Reliability Pump

Featuring 6 addressable LEDs, the built-in LED can paint your build with 16.8 million colors. The lighting effects can sync with the Riing Plus RGB fans. The high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool.

Digital Lighting Controller

The controller is designed with a DIP switch on the back. Hence, you can set a number for each controller easily. You can add up to 5 devices to one lighting controller and up to 16 controllers to the software. The controller and the coding guide are included in all packs.

High Performance Waterblock and Durable Sleeved Cable

The cooper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. The low evaporation tube effectively decreases the loss of coolant; therefore no refill is either needed or required. Additionally, the reinforced sleeved cable delivers one of the best durability and prevents the tubing from any damages.

Patented Riing Plus RGB Software & App

Monitor the fan performance, adjust the fan speeds, and customize the lighting effects for up to 80 fans with Thermaltake’s patented Riing Plus RGB Software and an exclusively designed mobile app.

Light Mode

Switch between different lighting schemes (Full Lighted, Sound Control, Flow, RGB Spectrum, Ripple, Blink, Pulse, Wave, and Thermal) along with three Color modes (RGB, Single and Off) and four Light Speeds (Slow, Normal, Fast and Extreme).

Fan Speeds

Adjust fan speed RPM on a dedicated control panel. The software can set the fans to ‘Silent Mode’ where the RPM performs between a 500 – 1500 RPM range, or ‘Performance Mode’ which operates and dynamically adjusts all the way up to 1500 RPM. Besides running at the optimal RPM range, you can customize the speed by disabling PWM.

Fan Alert

The software offers real-time fan warning alerts when performance operating issues have emerged. The control panel of the failed fan will be grey out, so you can quickly identify which fan is causing issues.

Product description

Liqmax III A RGB, An addressable RGB AIO cooler for Intel and AMD CPU platforms, is designed to sync with ASUS Aura Sync, gigabyte RGB FUSION, MSI Mystic Light Sync, as rock polychrome, and RAZER Chroma to display 16. 8 million colors and dynamic lighting effects. The dual chamber design water block has a central coolant inlet (CCI) Structure, combined with the shunt-channel technology (SCT) on the cold plate, It is able to inject the coolant at the hottest spot to prevent heat surges and shorten the coolant flow path, resulting in faster heat transfer. In addition, the dual-convex blade is able to generate Air pressure and high-volume Air flow to provide optimal cooling performance. Liqmax III A RGB cooler is an ideal choice for mainstream water-cooler addressable RGB Gaming rigs.

• Luminous addressable RGB fan and aurabelt water block display 16. 8 million colors
• Dual Chamber water block design
• Patented Shunt-Channel-Technology (SCT) boosts thermal conductivity and eliminates any heat surges
• Dual-convex fan blade creates high volume air flow (72. 1 CFM)
• Intel LGA 1200/2066/2011-3/2011/1366/1156/1155/1151/1150
• AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1

User questions & answers

Question:	Are these fans quiet
Answer:	Yes very quiet at base speeds but of course gain dB when increasing fan speeds
Question:	Does this have the same corrosion issues as the threadripper version
Answer:	The corrosion issues with our version 1 threadripper coolers had been addressed and fixed.
Question:	Is this a 12v, 4 pin system or not
Answer:	Our addressable RGB products uses 5v 3-pin system. Please check out our ELC-LMT120-HF which is RGB and uses 12v, 4-pin header system.
Question:	Does it include thermal paste
Answer:	Yes, thermal paste is included

Product features

LIQMAX III 360 ARGB

LIQMAX III ARGB, a CPU AIO cooler is designed to sync with motherboards that have a 5V Addressable RGB header. By synchronizing with motherboard software, LIQMAX III ARGB can display 16.8 million RGB illuminations. LIQMAX III ARGB 360mm radiator model also includes a RGB control box for users to select preferred lighting effect and no software needed.

• Anti-leak Tech Inside
• Stainless steel U-shape pipe, sturdy and fashionable
• 5V RGB on waterblock and fans, support wire controller and mainstream motherboard control
• Dual chamber design, higher heat dissipation efficiency
• Support AMD TR4/AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1 and Intel LGA20XX/LGA1366/LGA115X

User questions & answers

Question:	i do not have a 3-pin rgb connector on the motherboard, but only a 4-pin rgb connector. can i connect this water block through a 4 pin rgb connector
Answer:	No, Captain 240 Pro V2 can only be connected with 5V 3 pin ADD-RGB header on motherboard. If you don't have 3 pin header, you can use the included cable controller to control the light.
Question:	If i want the rest of my fans to match the ones included with the deepcool captain 240pro v2, which model should i buy
Answer:	You can buy CF series fans, including CF120, CF120 3in1, CF140, CF140 2in1.
Question:	will it qork on a aorus pro x399 mobo in therms os size wise? abd on a threadripper 1920x
Answer:	If you're overclocking. @ stock settings you should be fine.
Question:	Mine has an air bubble in it, will it settle in the top of the radiator when I install it
Answer:	Yes it should

Product features

Anti-Leak Tech Inside

CAPTAIN 240PRO V2 is equipped with Deepcool’s exclusive Anti-leak Technology.

The technology helps the system achieve an automated pressure balance, which will significantly improve operation safety of AIO liquid cooling systems.

Stainless Steel Pipe

CAPTAIN 240PRO V2 upgraded its U-shape pipe from glass to stainless steel, gaining extra sturdiness and machinery-like aesthetics.

ADD-RGB Lighting System

5V addressable RGB system is installed on both water block and fans.

The lighting system has 5 in-built effects and 36 interchangeable lighting modes. It also supports SYNC control by motherboards.

Easy to Install

Unique pre-installed spring screws make the installation on motherboard super convenient.

Accessories like PWM hub and RGB extension cable also allows easy RGB and PWM control.

Motherboard and Cable Control

The 16.7M true color flowing RGB system can be easily controlled by the included wired controller or motherboard (with 5V 3 Pin A-RGB header) SYNC software.

Product description

The Master liquid all in one liquid CPU cooler is custom, inside and out. Our low profile dual chamber pump outperforms its single chamber predecessors in heat transfer. The Master Fan air Balance fans work with our characteristically sturdy build quality to keep this thing as quiet as a library. Addressable RGB LEDs are installed on both the pump and fans for full color customization that can be controlled through the provided controller or our exclusive cm Plus software. Kink free, factory sealed FEP tubing now comes sleeved for a premium look. Screw it in and experience the quiet muscle of liquid cooling without ever worrying about refills or maintenance. Enjoy the work of decades of thermal innovation.

• 240 millimeter Radiator low: profile dual chamber addressable RGB pump with dual addressable RGB fans for push and pull air flow; Air flow: 66.7 CFM; Noise level:30.0 decibels
• Addressable RGB fans and pump: Color option can be controlled through Cooler Master software centimeter Plus
• Removable pump cap: never worry about installing the pump upside down; Pop out the cap and place it; Done
• Includes: Wired addressable RGB Controller for non RGB motherboards for customize colors
• Sleeved FEP Tubing's: sleek black outer sleeves with FEP Tubing's inside for durable lasting and flexibility
• Includes 1 to 3 addressable RGB Splitter cable for multiple ARGB fans; Refer to the PDF attached below in technical Specification for user Manual
• CPU socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	I Bought the lc240e but does ot come with controller
Answer:	IT should include controller and cable
Question:	What does the legacy rgb header on the cotroller do? can i hook other rgb fans or lights up with it
Answer:	The way I have it hooked up is through Cooler Master’s 1 to 3 way splitter on an addressable rgb headed on my Asus z370-e Mobo. You can attach other rgb plugs to that but I’d suggest go straight to your mobo
Question:	Can you mount this at the top of the coolermaster 500M
Answer:	Hello Floyd, You likely won't be able to mount this on either 500M(H500M or the MC500M). The MC500M can only support up to a 280mm radiator on top. The H500M can support a 360mm radiator on top, but it is limited to 43mm clearance from the top. This cooler's thickness is 50mm. CM-PNguyen
Question:	Does it include thermal paste with the cooler
Answer:	Hello, Yes, this cooler comes with thermal paste for the installation. CM-PNguyen

Product description

Thermaltake water 3. 0 240 ARGB sync Edition comes with two 120 mm fan with a large surface radiator, high Performance water block and pump for ultimate CPU cooling. The built-in pure ARGB fan features compression blades, hydraulic bearing, and 16. 8 million colors LEDs that is ready to sync with 5V RGB Capable motherboards from ASUS, Gigabyte, MSI and ASRock. Users can easily switch RGB lighting effects using the ARGB Controller that is included in the packet, or by ASUS aura Sync, gigabyte RGB FUSION, MSI Mystic Light Sync and as rock polychrome software. Water 3. 0 ARGB sync Edition series allows users to enjoy better cooling performance and greater CPU protection!



Light modes: wave, full lighted, RGB spectrum, LED off, flow, ripple, Pulse, and blink Preset colors: red, yellow, green, teal, blue, White, Purple, and rainbow

LED speed: 4 levels

color: RGB

color selector options with 16. 8 million colors

Features motherboard synchronization manual LED control with a RGB controller high performance copper base plate design accelerates heat conductivity supports up to 120mm fans for push/pull configurations. custom designed 120mm large surface aluminum radiator High quality pump enables maximum water circulation and worry free maintenance includes universal mounting kit for multiple CPU socket configurations factory filled coolant requires no refill easy installation with maintenance-free operation



Package contents

Thermaltake water 3. 0 a RGB sync 240mm radiator liquid CPU system(x2) 120mm pure a RGB sync fan w/ ARGB controller(x2) motherboard signal bridge Cable (ASUS, MSI, ASRock and gigabyte)radiator and fan mounting screws (Corse/fine screws both included), quick start Guide



P/N: CL-W233-PL12SW-A

WEIGHT: 1230 g

PUMP:

Motor Speed: 3600 RPM

Rated Voltage: 12 V & 5V

Power Input: 12V – 3.9 W , 5V – 1.06 W

WATER BLOCK Material: Copper

FAN:

Dimension: 120 x 120 x 25 mm

Speed: PWM 500~1500 R.P.M (2510-4PIN)

Noise Level: 25.8 dB-A

Rated Voltage: 12 V & 5V

Power Input: 12V- 1.44 W, 5V – 1.6W (one fan)

Max. Air Flow: 56.45 CFM

Max. Pressure: 1.59 mm-H2O

LED Control: ARGB controller or 5V addressable RGB header on motherboard

TUBE:

Length: 326mm

Material: Rubber

RADIATOR:

Dimension: 270 x 120 x 27 mm

COMPATIBILITY:

Intel

LGA 2066/20113/2011/1366/1200/1156/1155/1151/1150

AMD

TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2

*AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.

• Digital/analog - customize pump and Fan lighting with as US aura, Gigabyte RGB FUSION, MSI Mystic Light Sync, ASROCK polychrome or through the included a RGB Controller Offering 7 light modes and 8 full light preset colors
• Ready to sync - equipped with an a RGB LED Ring on the pump and a RGB radiator fans, lighting effects can be synchronized with select as US, Gigabyte, MSI, and ASROCK 5V RGB header motherboards and controlled via motherboard RGB software
• Find your color - select from 16. 8 million colors, bringing the right atmosphere to any system theme
• High efficiency radiator - large surface radiator increases cooling and provides exceptional heat dissipation
• Performance water block - copper base plate accelerates the heat conductivity for water block and pump
• No refill required - reinforced-sleeved low evaporation tubing delivers the best durability and effectively decreases the loss of coolant
• Tube length - (360)400mm, (240)326mm, (120)326mm

User questions & answers

Question:	What is ideal placement of radiator in a push/pull configuration? case: enthoo evolv atx by phanteks
Answer:	I would mount it at the top of the case unless the hose's can reach the front.
Question:	What do you guys recommend for a pump and reservoir for this system
Answer:	I think you misunderstand sir, this is a self contained system. You can not add an external res or pump nor do you need too. It is a self contained system, much like the corsair h55 and such, its a closed loop system which means less maintenance and slightly lesser cooling. However short of cooling AMD 9590, I cant think this bad boy would have a problem cooling anything.
Question:	would this work with an i core
Answer:	Yes it will work perfectly. No problem. Go for it.
Question:	Does this come with thermal paste
Answer:	The waterblock has a preattached thermal pad (just a square of thermal compound) that will adhese to the processor once you start it running. You can scrape it off and use your own like Arctic Silver or Noctua or something if you want but with an overclocked i7, my processor generally idles at 20 celsius or less with the default pad and at load it is rarely above 40. I had planned to use arctic silver but I left the included compound on to see how good it was and it is fine.

Product features

Hassle-free Installation

Thermaltake Water 3.0 ARGB Sync Edition Series is compatible with major INTEL/AMD sockets and is designed with a tool-free pump installation system.