14 best liquid cooler for threadripper

Product description

Floe Ring RGB 360 TR4 Edition is a 16.8 million colors liquid CPU cooler especially designed for AMD TR4 motherboards. Comes with three 120mm Ring Plus RGB fans and a LED water block, floe Ring RGB 360 TR4 Edition features extraordinary performance and superior quality. The large surface radiator Plus high-performance water block and pump guarantees ultimate CPU cooling. Besides, the water block and the fans are manufactured with multiple addressable LEDs that supports Thermaltake patented TT RGB Plus software, Amazon Lexa Voice service and can sync with RAZER Synapse 3 (RAZER Chroma). enjoy better cooling performance and greater CPU protection with one Simple upgrade!



P/N: CL-W235-PL12SW-A

Pump

Rated Voltage: 12 V

Rated Current: 0.325 A

Motor Speed: 3600 R.P.M



Water Block

Material: Copper

Rated Voltage: 5 V

Rated Current: 0.4A



Fan

Dimension: 120 x 120 x 25 mm

Speed: 1000 ~ 2000 RPM

Noise Level: 21.8 ~ 33 dB-A

Rated Voltage: 12 V

Max. Air Flow: 26.35 ~ 54.42 CFM

Max. Pressure: 0.66 ~ 2.45 mm-H2O

Connector: 9 pin



Tube

Length: 400 mm

Material: Rubber



Radiator Dimension: 393x 120 x 27 mm



Compatibility AMD TR4 (CPU Socket)

• Designed for AMD Ryzen Threadripper TR4 - high-performance water block with a large Copper base plate offer superior IHS coverage for Str4. The pump comes installed with the AMD Str4 bracket and thermal paste for easy installation.
• Set lights effortlessly - utilize 20+ lighting schemes with the patented TT RGB Plus software and an exclusively designed TT RGB Plus app.
• Sync with Razer Chroma lighting - experience synchronized gaming and RGB lighting effects with Razer Synapse 3.
• Fun with TT AI voice control - gives you full control over the lights, fan speeds with your voice.
• Works with Alexa - allows you to control the lights, fan speeds, and even check the current weather condition in your location by giving verbal command to the Alexa-enabled device.
• High efficiency radiator - 360mm large surface radiator supports up to 6x 120mm fans for additional heat dissipation.
• Durable tubing - the high pump enables the maximum amount of water circulation. The low evaporation tube effectively decreases the loss of coolant.
• 3 year

User questions & answers

Question:	Can it run on just usb cuz i want to put htis on my xbox or does it need to be pluged into a pc
Answer:	Aside from Snaps11, ignore these trolls. They lack the mental fortitude to be able to provide a real answer. No, it will not STANDARDLY fit into the case of an XBox. But the science of whether it will transfer general heat is there. You'll need to find a way to brace the fan in a way that keeps it clear of debris, so I recommend building a small wooden frame that lifts it off of whatever surface the XBOX stands on (to keep clear of settling dust). You will also need to find a way to maintain contact of the cooling plate on the area you wish to cool. Because the cooling is concentrated on the contact area, I recommend purchasing three single fan cooling systems to place where the XBOX heats up the most. This will void the warranty, but I recommend cutting away parts of the plastic casing so that the metal cooling plates can be placed against metal, where the greatest heat transfer can take place. So can these be used on consoles, or anything really? Yes, provided you understand that metal contact is the best way to transfer heat, and you are ok doing an augmentation job on the device you wish to cool.
Question:	does it work on ryzen
Answer:	It does come with the mount for the new and ryzen
Question:	what size are the fans
Answer:	120's I replaced them with Corsair Air Series SP 120 LED High Static Pressure Fans Cooling. Cooler is working great. Rig is running between 32c and 42c.
Question:	can you put coolant instead of water in this
Answer:	You could, but it's not necessary. The reason anti-freeze is used in cars is because the range of temperatures a car's engine may be exposed to are wider than your computer. People who say anti-freeze is just to stop water from freezing are wrong. If they were right, people in hot climates would only need water in their cars, but just using water will overheat the car due to the climate + engine heat. Ethylene glycol is called antifreeze, but could just as easily be called "anti-boil" since it's boiling point is 235F! So unless your CPU is going to be running at over 100C? You don't need "coolant/antifreeze" as well as water.

Product features

Floe Riing RGB 360 TR4 Edition

Product Description

Floe Riing RGB 360 TR4 Edition is a 16.8 million colors liquid CPU cooler especially designed for AMD TR4 motherboards. Comes with three 120mm Riing Plus RGB fans and a LED waterblock, Floe Riing RGB 360 TR4 Edition features extraordinary performance and superior quality. The large surface radiator plus high-performance waterblock and pump guarantees ultimate CPU cooling. Besides, the waterblock and the fans are manufactured with multiple addressable LEDs that supports Thermaltake’sTT RGB PLUS Software, Amazon Alexa Voice Service can sync with Razer Synapse 3 (Razer Chroma). Enjoy better cooling performance and greater CPU protection with one simple upgrade!

Thermaltake Floe Triple Riing 16.8 Million Color RGB TR4 Edition Alexa Razer Chroma Syncable AIO Liquid Cooling CPU Cooler CL-W235-PL12SW-A

TT RGB PLUS Ecosystem is the intelligent lighting system for PCs that combines the most advanced addressable LED lighting with Thermaltake’s patented TT RGB PLUS Software. TT RGB PLUS ecosystem provides nearly unlimited possibilities for playing with colors, synchronizing lights to games, music, CPU temperatures or other TT RGB PLUS products, including case fans, CPU/VGA waterblocks, AIO CPU coolers, PSUs, LED strips and peripherals. The software allows users to change the light modes, colors, speeds, brightness, fan speeds, and even supports AI voice control in iOS and Android devices.

SyncALL, Say “Hello TT” Thermaltake AI Voice Control

Talking to TT RGB PLUS App is an easier, faster way to set lights for your systems. You can ask it to turn the lights on or off, switch lights modes, dim the lights, change light colors, or adjust lights speeds or fan speed

Product description

Equipped with our new 3rd Gen. Dual Chamber Pump with upgraded material with industrial properties made for extended usage and longevity. The 360 mm radiator is optimized with a 25% increase in interior aluminum fin surface area together with the Sickleflow 120 Non-LED fan enhances the cooling efficiency and performance. The Sickleflow Fan designed with two-tier anti-dust prevention mechanism for longer and more silent performance. Cooler Master MasterLiquid ML360 Mirror comes with new lighting display effect using Infinity mirror to showcase an array of color. Includes a wired addressable RGB controller but also compatible with all major motherboard manufacturer software.

• New SickleFlow 120 Non-LED Fan: Triple SickleFlow 120 All-Black fans with a refreshed exterior design with 2-tier anti-dust prevention, quietness and airflow performance.
• ARGB Lighting Solution: Signature cooling performance with a Vibrant Infinite Mirror ARGB pump design for all of the users wanting a fully customizable lighting effects.
• 3rd Generation Dual Chamber Pump: New dual chamber pump for optimized to improved overall cooling efficiency and performance.
• Larger Surface Area: Increased the surface area of the fins on the radiator for better heat dissipation
• Industrial Grade Seal: High Industrial Grade EPDM material to strengthen the seal for improved longevity and Anti-Leaking
• CPU Socket Support: AMD Threadripper TR4

User questions & answers

Question:	Does the 240mm radiator have a fan splitter
Answer:	yes
Question:	How long are the tubes that connect the pump to the radiator
Answer:	In the package it comes with a a intel and amd mounting hardware and backplate you may be able to do it without taking out the motherboard or if you can have someone help hold the bracket that will make it easier
Question:	How are the fans performance? i would probably replace them anyway since i'm a rgb fanatic but curious how this performs vs the ml360r
Answer:	Responding in part to the review left by "Brody", but also answering the original question ... I was about to leave a negative review for this item because I hooked everything up and while the Asus Aura worked for the fans, the lights on the CPU block were stuck in "unicorn vomit" mode. I then watched the promo video in the listing and saw that the lights on the CPU fan could be sync'd with the case fans, so I knew I had to be missing something. I then watched the brief installation video, and at about 1:40 it mentions ""connect the RGB sync cable to the water block". There's small port on the CPU block that's covered by a rubber grommet. It's easy to miss. I remove the grommet, installed the sync cable, plugged it into the 5V RGB daisy-chain, and voila, Asus Aura can now control the lights on the CPU block. So, yes, the lights on the fans AND the CPU block are controllable by the little wired control panel that comes with it, or Asus Aura, or any of the other RGB standards that are supported. (The manual alludes to this on page 35, but doesn't specifically say "hook up the cable".)
Question:	Can you turn off the Cooler Master logo led but keep the rings on
Answer:	If your MOBO has enough headers to connect to then you should be fine otherwise you should buy some fan splitters or hubs

Product features

MasterLiquid ML360 Mirror TR4 Edition

Equipped with our new 3rd Gen. Dual Chamber Pump, strengthen with high industrial grade EPDM material to improve longevity and anti-leaking prevention. Optimized radiator with a 25% increase in aluminum fin. The Sickleflowfans provide the cooling and silent performance.

ML360 Mirror TR4 Edition comes with a new lighting display effect using the Infinity mirror to showcase an array of colors. Includes a wired ARGB controller but also compatible with all major motherboard software

Threadripper Designed

Designed for AMD Socket TR4 platform featuring a larger contact surface area that is specifically tailored for Threadripper processors.

Industrial Grade Seal

High Industrial Grade EPDM material to strengthen the seal for improved longevity and Anti-Leaking prevention.

Addressable RGB Controller

Even without an ARGB capable motherboard, you can adjust your favorite colors, brightness, and effects at the touch of a button without the need for software.

Product description

The Master Liquid ML360P Silver Edition is Cooler Master’s newly optimized liquid cooler to ensure maximum performance and elegant aesthetics. Cooler Master has re-designed the Dual-Chamber pump outlook into a sleek aluminum finish. The ML360P Silver Edition is employed with Cooler Master’s custom 360mm low resistance radiator which allows for a higher flow rate and enhances heat exchange efficiency /performance. In addition, the new integrated Addressable RGB 360mm fan design allows for easy installation and enhances cable management. The aluminum Addressable pump design will definitely differentiate your PC from the rest.

• 360mm Radiator - Aluminum silver finish 360mm Radiator to remove excess heat from the CPU and cool with maximum efficiency. Air flow - 45 CFM. Noise level - 30 decibels
• Integrated fan design - integrated three 120mm fans into one 360mm square frame unit for a quick install and reduce loss of airflow to the radiator
• Dual dissipation - our low-profile dual chamber pump enhances performance and durability over our last-gen single chamber pump designs.
• Fewer wires to worry about - Easy cable management with just 2 connectors for the integrated 360mm fan design
• Addressable RGB LED - addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+
• Sleeved FEP - underneath sleek black sleeves, FEP material beats rubber tubing in keeping Liquid where it belongs – inside the cooler
• CPU socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1200, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2

User questions & answers

Question:	I Bought the lc240e but does ot come with controller
Answer:	IT should include controller and cable
Question:	What does the legacy rgb header on the cotroller do? can i hook other rgb fans or lights up with it
Answer:	The way I have it hooked up is through Cooler Master’s 1 to 3 way splitter on an addressable rgb headed on my Asus z370-e Mobo. You can attach other rgb plugs to that but I’d suggest go straight to your mobo
Question:	Can you mount this at the top of the coolermaster 500M
Answer:	Hello Floyd, You likely won't be able to mount this on either 500M(H500M or the MC500M). The MC500M can only support up to a 280mm radiator on top. The H500M can support a 360mm radiator on top, but it is limited to 43mm clearance from the top. This cooler's thickness is 50mm. CM-PNguyen
Question:	Does it include thermal paste with the cooler
Answer:	Hello, Yes, this cooler comes with thermal paste for the installation. CM-PNguyen

Product features

ML360P Silver Edition

The MasterLiquid ML360P Silver Edition ensures maximum performance and elegant aesthetics. Cooler Master has re-designed the Dual-Chamber pump outlook into a sleek aluminum finish. The ML360P Silver Edition is employed with Cooler Master’s custom 360 mm low-resistance radiator, allowing for a higher flow rate and enhances heat exchange efficiency and performance. The integrated Addressable RGB 360 mm fan design allows for easy installation and enhances cable management.

Integrated Fan Design

By combining three 120mm fans into one integrated unit for a quick and painless install

Exclusive Wired ARGB Controller

Allows you customize colors even without RGB motherboard

Double Tubing

FEP tubing makes it durable yet flexible. Sleeved tubing on the exterior to give it a premium look

Product description

LIQTECH TR4 II is perfect for overclocked PCs, image editing workstations, and high-end gaming machines.

• 100% sTR4 IHS Coverage
• Exclusive for AMD Thread ripper Platform
• Support 500W+ TDP
• Patented Shunt Channel Technology
• Ultra-premium Water Block Featuring Addressable RGB Lighting

User questions & answers

Question:	Will this cooler fit in a nzxt h700i mid-tower atx case
Answer:	Yes
Question:	I own a tr-1950x with an asrock taichi x399 motherboard (fully populated ram slots) and am curious if this would fit or not
Answer:	Yes you can,i have different rgb fans.
Question:	Would this work well with an i9-9900k
Answer:	They are good temps wise albeit a little noisy. The pump is the same as the ml360r I believe. As a fellow RGB fanatic, I'd recommend getting one of these. https://www.amazon.com/dp/B07PCGYG1V/ref=cm_sw_r_cp_apa_fabc_pVGbGb2P39JQS?_encoding=UTF8&psc=1 Mine looks awesome and is quieter than the included fans.
Question:	Did they ever add new coolant to the loop and fix the pump failing issue? I want to purchase one but those two are the only things holding me back
Answer:	No. The leds that illuminat the ring are also illuminating the logo inside.

Product features

LIQTECH TR4 II

LIQTECH TR4 II Series is an All-in-One CPU Liquid Cooler with pre-filled coolant. This makes a water cooler as simple as a regular air cooler. Easy installation and no maintenance. The fully sealed design ensures lowest evaporation of liquid and a long product lifetime. With a TDP of 500W+, LIQTECH TR4 II is the only Choice for Cooling AMD Ryzen Threadripper CPUs for Gaming and Professional use.

Aurabelt Addressable RGB Waterblock

Aurabelt Water Block of LIQTECH TR4 II is equipped with Addressable RGB LEDs offering Rainbow Lighting Effects

100% sTR4 IHS Coverage

Tailored to 100% AMD Ryzen Threadripper's Integrated Heat Spreader (IHS) for Uncompromised Cooling Performance

Fan Design

The T.B.Pressure fan blades are a result of precision engineering calculating the shape and angles. The high pressure blades concentrate the airflow to the center of the fan achieving a strong static pressure

• Frame is equipped with rubber pads to reduce the vibration and noise.
• Twister Bearing Technology, ensures silent operation and up to 160,000 hours MTBF

Flexible Polyamide (PA) Rubber Tubes

Premium weaved tubing are made of flexible and long lasting polyamide rubber with multiple layers ensuring zero permeability and long-lasting operation. The tubes offer an easy system installation thanks to a length of 400mm

Ceramic Nano PI Bearing Pump

Robust EF1 Pump with precision engineering delivers extremely high flow rate up to 450 L/h for superior cooling performance. The long-lasting ceramic bearing offers low operating noise

Shunt-Channel-Technology (SCT)

SCT cold plate design for maximum cooling performance. The shunt inside the micro fin structure minimizes the “Boundary Layer” effect, eliminates hot spots much quicker and ensures a perfect heat dissipation

RGB Lighting Control

• Control RGB lighting with included controller to adjust preferred lighting effects (10 pre-set effects), brightness and speed.
• Sync the RGB lighting with motherboards featuring Addressable RGB headers (3-Pin Assignment: 5V/D/-/G)

Product Dimension (LxWxH)

• Radiator Size 394 x 120 x 28 mm
• Fan Size 120 x 120 x 25 mm

Product description

The Wraith ripper is a product developed through an exclusive collaboration between Cooler Master and AMD. The Master Fan Pro 120 servo, seven copper heat pipes Air cooler is designed to keep the AMD's 2nd generation Ryzen Thread ripper CPUs cool under any computing condition. The dual tower heatsink covers more surface area. Creating a more effective way of dissipating heat.

• Designed & Optimized for Socket TR4Features a larger contact surface area that is specifically tailored for Ryzen Thread ripper
• Dual tower heatsink a combination of 2 sets of heatsink covers more surface area and dissipates heat more efficiently; The Jet black paint enhances cooling performance
• Build in Wraith ripper RGB software with our exclusive partnership Cooler Master and AMD designed a software that allows you to take full control of your rig's lighting
• Easy TR4 mounting system exclusive all in 1 TR4 mounting design for Easy installation
• Cpu socket support TR4. Fan Dimensions (L x W x H)-4.7 x 4.7 x 1 inches

User questions & answers

Question:	Will this fit a msi x399 gaming pro carbon ac motherboard? the motherboard has a heatsink above the cpu, i'm worried this cooler may not clear that
Answer:	Depends, my case fits a 200 mm fan. A 120 mm fan is about 4.75", and a 200 mm is just shy of 8".
Question:	Will this fit into a p350x case? max height is 160mm & this is 160.5mm. any wiggle room
Answer:	Hello Jin,The MasterCase 5 supports a 120mm fan on the top and rear.CM Myke
Question:	anyone know the tdp for this cooler? haven't found an answer yet
Answer:	I have two of the fans in the computer I'm building at the present time and neither one emits any light. I hope that helps you out.
Question:	Release Date
Answer:	No,this is not made to work with 12 volt battery. This is made to work with a computer only. The fan has a length of wire built into it with a 3 pin connector that plugs onto a fan header on the motherboard. The 3 wired included wire harness is to hook up to power the fan with molex power the 4 pin connectors. If you already have all the fan headers of the motherboard occupied by other fans,you can't use the 3 pin connector built onto the fan wire.This is where the 3 wired harness helps. The 3 pin connector snaps onto the 3 pin connector on the fan wire and then you use the molex power the 4 pin connectors to power the fan, and since there is a male on one end and female on the other you have the option to power the fan for the connection you have.

Product features

Cooler Master AMD Wraith Ripper

• Specialized air-guide armor designed to guide the flow of air for peak cooling performance and reduce dead heat spots on the cooler. The armor is also illuminated by number of addressable RGB LED's for full color customization.

• AMD Ryzen Threadripper has up to 32 cores within the package. To ensure heat is transferred and removed quickly and evenly, Wraith Ripper is custom fitted to provide full coverage.

• A combination of 2 sets of heatsink allows bigger and more spread out surface area. The black paint enchanes radiation cooling performance

Product description

The all-new Kraken Z Series lets you personalize your all-in-one liquid cooler like never before. Through CAM’s unique software interface, you can do more than simply fine-tune settings; you can now display your favorite images and animated gifs, or CAM system information, allowing for total customization. Backed by a 6-year, the Kraken Z Series provides superior performance in liquid cooling, simple installation, and a look that is uniquely your own.

• Customize Your Battlestation: With a bright, 2.36” LCD screen capable of displaying 24-bit color, you can now completely customize the look of your CPU cooler
• Stay In Control: CAM’s elegant, user-friendly software makes you the master of your PC with simple-to-use, intuitive controls, you can manage your Kraken’s performance and appearance with ease
• Incredible Performance: Featuring a chamfered intake and fluid dynamic bearings, they deliver silent operation, long-term reliability, and powerful cooling performance
• Simple Installation: With the fully programmable display, the pump can be rotated to fit the needs of your motherboard without affecting the direction of the logo or image
• Compatible Socket & CPU: Intel Socket LGA 1151, 1150, 1155, 1156, 1366, 2011, 2011-3, 2066 / AMD Socket AM4, TR4(bracket not included)

User questions & answers

Question:	Does the software collect information from my computer and send it over the internet
Answer:	Hello there, our CAM software only pulls statistics from your computer, like temperature, load, etc. We never pull private information or otherwise!
Question:	will this cooler fit inside a nzxt 710 mid tower
Answer:	It will even fit in a mini-itx box.
Question:	Does the newest z73 version come with an am4 bracket? the description isn’t clear with which bracket is not included
Answer:	Yes, it does come with AM4 Bracket. Intel Sockets 2066, 2011x, 1366, 115x / AMD Sockets AM2(+), AM3(+) AM4, FM1, FM2(+)
Question:	is thermal paste included
Answer:	Thermal Paster is pre-applied on the pump head

Product features

Kraken Z Series

The all-new Kraken Z Series lets you personalize your all-in-one liquid cooler like never before. Through CAM’s unique software interface, you can do more than simply fine-tune settings; you can now display your favorite images and animated gifs, or CAM system information, allowing for total customization.

CUSTOMIZE YOUR BATTLESTATION

With a bright, 2.36” LCD screen capable of displaying 24-bit color, you can now completely customize the look of your CPU cooler with custom images, gifs, or CAM data.

STAY IN CONTROL

CAM’s elegant, user-friendly software makes you the master of your PC. With simple-to-use, intuitive controls, you can manage your Kraken’s performance and appearance with ease.

INCREDIBLE PERFORMANCE

The included Aer P radiator fans are designed for liquid-cooling perfection. Featuring a chamfered intake and fluid dynamic bearings, they deliver silent operation, long-term reliability, and powerful cooling performance.

Product description

The EVGA CLC 360 liquid CPU cooler has arrived! This new liquid cooler from EVGA gives you incredible performance, low noise, and robust software controls. The full copper water block pulls the heat from your CPU to the radiator, where newly designed fans, Featuring Teflon Nano bearings, effortlessly disperse the heat. The CLC 360 offers premium sleeved tubing and fully controlled RGB LED to provide a sleek look.

• Compatible with Intel LGA2066/2011/2011-v3/1200/1150/1151/1155/1156/1366 and AMD AM2/AM3/AM4/FM1/FM2/TR4 and upcoming variants
• 360mm Triple fan, radiator
• RGB LEDs, can be synced to other EVGA RGB components
• Unique EVGA fan design for reducing noise without sacrificing performance
• Includes the software suite for monitoring and managing EVGA AIO's, EVGA flow Control. Airflow: 74. 82 CFM (Max)

User questions & answers

Question:	Can I swap out the fans on this unit for be Quiet! 140 fans? Thanks
Answer:	Yes but know that these stock fans are PWM controlled fans (4 wire fans and not 3). You could plug in a 3 wire fan but they would either run at full speed or pulse at a lower speed. So basically you need to buy 4 pin PWM fans or like another person stated, hook the replacement fans to your motherboard and control from the bios or motherboard app for fans. You won’t be able to control the fans from the EVGA “FLOW” app. I don’t know if the Flow app would freak out if it didn’t sense a fan. I ended up temporarily swapping out the stock fans with 3 pin fans (hooked to the motherboard). Then I installed one stock EVGA fan in my case (since I had the extra room) and reconnected to the EVGA fan power from this AIO so the app still sees a fan and I can control it. I didn’t even try it without to see if it would set off an alarm in the FLOW app but maybe I’ll check that out.
Question:	Does CLC120mm CL 11 fit the kraken G12 Gpu bracket
Answer:	Yes it will fit, just did it. You DO NOT have to file anything down, you just have to crank it on with good force. I know it sounds sketch but I got mine to lock in place just like other units would, without any modification. The tubes aren't very long though so I'd be more worried about tube length. I could really only mount it as rear exhaust so it gets some heat from CPU but still does great. Gaming doesn't get over 65C and keeps my system in a Q500L case from getting heat soaked from GPU open air stock cooling. The fan is not great, get a better one for 10-20 if you really need to. I'm just using an off brand static pressure fan that I have in place of the stock. Works great.
Question:	Is this cooler going to support am4 once ryzen comes out? i plan on making a build with this cooler and would like to know if i should switch
Answer:	I don't have all of the components for my system so I can't speak to the performance of the cooler. The CLC 280 that I received this week included a bag labeled "AM4" which contained 4 stand-offs. There was no supplement to the manual (which doesn't discuss M4 boards) and there was no AMD hold-down ring other than the one for older AMD motherboards. I don't know if I got half of what I need or if the standard hold-down works with the included standoffs. My guess is that they will but I won't know until I start my build.
Question:	Paste included
Answer:	Yes, thermal paste is pre-applied to the water block plate.

Product description

The ROG ryujin series delivers optimal cooling performance in a 240mm AIO CPU cooler. Industrial-grade Noctua radiator fans optimize airflow and static pressure while FanXpert enables total software controls. Aura Sync RGB and a 1.77” OLED allow for limitless customization via live dash to pair perfectly with Asus motherboards. Compatibility Intel: LGA 1150, 1151, 1152, 1155, 1156, 1366, 2011, 2011-3, 2066, AMD: AM4, TR4

• 1.77” full-color OLED panel for real-time system stats and personalized logos or animations via Asus livedash software controls. Air flow - 122 CFM. Noise level - 29.7 decibels
• Industrial-grade 2000 RPM PWM noctua radiator fans and software control via FanXpert reduces unnecessary noise while keeping your system
• Patent pending embedded Micro fan inside the pump housing to maximize cooling performance on the VRM and M.2
• Aura Sync addressable RGB lighting features a nearly endless spectrum of colors with the ability to synchronize effects across an ever-expanding ecosystem of AURA Sync enabled products
• Aluminum pump cover and reinforced, sleeved tubing ensure high durability

User questions & answers

Question:	Does this cooler work with 4 pin rgb motherboard connections or is it the 3 pin
Answer:	It's actually 3 lbs. Pretty light, but definitely not 1.6 oz.
Question:	Dose live dash worl with 6th gen maximus rog motherboards
Answer:	Well, Amazon will offer a 30-day return but if you're talking about Dell, it says in the description of the product: "Comes With Minimum Of 90 Days Dell Direct on Site WARRANTY. Onsite Service After Remote Diagnosis (Consumer Customer) / Next Business Day Onsite After Remote Diagnosis (Commercial Customer)." I would assume this goes for everybody they are able to ship to. You might want to go to their official site for more details maybe.
Question:	Can install the Pump Upside down and turn the display
Answer:	yes -there is a thumb drive port
Question:	Would this cpu cooler fit inside the phanteks evolv shift mini itx case? pcpartpicker says it might not
Answer:	1TB Solid state drive

Product features

Overview

The ROG Ryujin series delivers optimal cooling performance in a 240mm AIO CPU cooler. Industrial-grade Noctua radiator fans optimize airflow and static pressure while FanXpert enables total software controls. Aura Sync RGB and a 1.77” OLED allow for limitless customization via LIVEDASH to pair perfectly with ASUS motherboards.

Noctua IndustrialPPC fan

ROG Ryujin meets the thermal challenges of the latest multi-core CPUs with industrial-grade Noctua iPPC-2000 PWM fans on the radiator that deliver high performance and low-noise operation. The 120-mm fans generate 122 CFM of airflow at 2,000 RPM yet are extremely efficient with a 29.7-dB(A) acoustic footprint that's much quieter than competing fans.

Pump embedded fan

While powerful, liquid cooling does not circulate air around the CPU socket like a traditional heatsink and fan. ROG Ryujin overcomes this limitation with a 60mm fan embedded in the pump housing that circulates air to the CPU VRMs, M.2 slot and surrounding components to dramatically reduce temperatures for improved performance and stability.

LiveDash OLED

ROG Ryujin is the world's first AIO cooler to feature an embedded 1.77-inch LiveDash color OLED that displays useful system information, such as temperatures, voltages, fan speeds, or frequencies. You can also customize LiveDash to display a customized image or animation highlighting your clan insignia or gamertag.

Complete LiveDash customizability

The LiveDash software utility lets you easily customize ROG Ryujin's LiveDash OLED display and RGB lighting effects. Select which system stats to monitor, choose personalized GIFs and images to display, and control RGB lighting from an intuitive interface that arranges settings in a step-by-step flow from top to bottom.

Subtle, striking, sleek

Infused with Aura RGB lighting in dramatic slash patterns on the shroud, Ryujin exudes a vibrant glow that highlights the CPU at the heart of your build

Perfect Syncronization

The impact of Aura RGB lighting can be further enhanced with ASUS Aura Sync, which allows harmonized lighting effects with other Aura-enabled system components and external accessories. Aura software give you complete control of lighting across all compatible devices, letting you dial in the vibe you want to display quickly and easily.

ROG Elite Rewards Loyalty Program

Become a member of the ROG Elite Rewards loyalty program and earn points for being an active Republic of Gamers fan. There are many ways to earn points including purchasing ROG gear, and a selection of rewards that can be redeemed with points, tailored to the ROG community. Rank up with ROG Elite Rewards!

Product description

The Master Liquid ML360R RGB all in one liquid CPU cooler is custom, inside and out. Our low profile dual chamber pump outperforms its single chamber predecessors in heat transfer. The MasterFan Air Balance fans work with our characteristically sturdy build quality to keep this thing as quiet as a library. Addressable RGB LEDs are installed on both the pump and fans for full color customization that can be controlled through the provided controller. Kink free, factory sealed FEP tubing now comes sleeved for a premium look. Screw it in and experience the quiet muscle of liquid cooling without ever worrying about refills or maintenance. Enjoy the work of decades of thermal innovation.

• Exclusive tech cooler master controls quality and builds on decades of innovation with 100 percent in house design and manufacturing
• Dual dissipation our low profile dual chamber pump enhances performance and durability over our last gen single chamber pump designs; Sizable performance leaps over last gen technology
• 360 millimeters radiator our aluminum 360 millimeters large surface radiator will remove excess heat from the CPU and cool with maximum efficiency
• Addressable RGB LED addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+ (To be released soon)
• Sleeved FEP underneath sleek black sleeves, FEP material beats rubber tubing in keeping liquid where it belongs inside the cooler; Fan air flow: 66.7 CFM (Max); Fan air pressure: 2.34 millimeter H2O (Max)
• CPU socket support: Intel LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	I Bought the lc240e but does ot come with controller
Answer:	IT should include controller and cable
Question:	What does the legacy rgb header on the cotroller do? can i hook other rgb fans or lights up with it
Answer:	The way I have it hooked up is through Cooler Master’s 1 to 3 way splitter on an addressable rgb headed on my Asus z370-e Mobo. You can attach other rgb plugs to that but I’d suggest go straight to your mobo
Question:	Can you mount this at the top of the coolermaster 500M
Answer:	Hello Floyd, You likely won't be able to mount this on either 500M(H500M or the MC500M). The MC500M can only support up to a 280mm radiator on top. The H500M can support a 360mm radiator on top, but it is limited to 43mm clearance from the top. This cooler's thickness is 50mm. CM-PNguyen
Question:	Does it include thermal paste with the cooler
Answer:	Hello, Yes, this cooler comes with thermal paste for the installation. CM-PNguyen

Product features

Cooler Master MasterLiquid Addressable RGB AIO CPU Liquid Cooler 28 Independently-Controlled LEDs Triple 120mm ARGB Air Balance MF

The PPS (Polyphenylene sulfide) and glass fiber construction resists a broad range of chemicals and is unaffected by moisture or immersion in water. Our pump is light and impervious to oxidation and corrosion

Custom design low resistance radiator allows higher flow rate, heat exchange efficiency and provides unmatched cooling performance.

Double tubing FEP tubing makes it durable yet flexible. Sleeved tubing on the exterior to give it a premium look.

MasterFan MF120R ARGB provides a specific air cooling solution ideal to maximize air pressure for AIO liquid cooling. Designed for Builders with Addressable RGB-enabled PCs, you can personalize the color of your fans to match your PC perfectly.

Product description

The Corsair Hydro Series H100i RGB Platinum is an all in one liquid CPU cooler with a 240mm radiator and vivid RGB lighting that's built for extreme CPU cooling. Equipped with 24 individual RGB LEDs H100i RGB Platinum offers a wealth of RGB lighting options via Corsair iCUE software. Two CORSAIR ML PRO RGB 120mm PWM fans run between 400 to 2,400 RPM, alongside an optimized cold plate and pump design that delivers the best ever Hydro Series cooling. Easy to install and compatible with all major CPU sockets, the H100i RGB Platinum pairs killer looks with chiller performance. Cold Plate Material: Copper.

• Two 120 millimeter ML PRO Series RGB magnetic levitation PWM fans deliver a blast of color and improved airflow for extreme CPU cooling performance. Air flow - 75 CFM. Noise level - 37.0 decibels
• 16 Individually controlled RGB LEDs light up the pump head to produce stunning, customizable lighting effects to match your build
• CORSAIR iCUE software allows you to control your cooler’s RGB lighting, monitor CPU and coolant temperatures, and adjust fan and pump speeds, all from a single intuitive interface
• Thermally optimized cold plate and low-noise pump design for high performance, quiet cooling
• Compatible Sockets: Intel LGA 115x, 1366, 2011, 2011-3, 2066 and AMD FM1, FM2, AM2, AM3, AM4, TR4

User questions & answers

Question:	Is this worth getting because the kraken is on sale for 124 and these are like 170 after tax. Seems a bit high
Answer:	Yes you can,i have different rgb fans.
Question:	What six are the hoses on this setup and can it be taken apart to add to the loop
Answer:	They are good temps wise albeit a little noisy. The pump is the same as the ml360r I believe. As a fellow RGB fanatic, I'd recommend getting one of these. https://www.amazon.com/dp/B07PCGYG1V/ref=cm_sw_r_cp_apa_fabc_pVGbGb2P39JQS?_encoding=UTF8&psc=1 Mine looks awesome and is quieter than the included fans.
Question:	Using it on a 2950 threadripper on a x399 taichi board. the usb connector is blocking a dimm slot with lp dimms. any other cable options available
Answer:	Yes. You can use your own fans if you have some already. The mirror version comes with the new Sickle Flow v2 fans however they have no rgb.
Question:	Does this come with pre applied thermal paste
Answer:	No. The leds that illuminat the ring are also illuminating the logo inside.

Product description

ASUS ROG Strix LC 360 RGB is the perfect solution for RGB enthusiast and delivers high-performance CPU liquid cooling with clean aesthetics Featuring a closed-loop design and addressable RGB radiator fans unleashes the full potential of your unlocked Intel or AMD CPU while further accentuating your build with brilliant multi-color lighting effects

• ROG-designed RGB radiator fans for optimized airflow and static pressure
• Individually addressable RGB and NCVM-coating pump over accentuates the sleek modern aesthetics
• Styled to complement ROG motherboard at the center stage of your build
• Reinforced sleeved tubing for increased durability
• CPU Socket Support AMD AM4 TR4*； Intel LGA 115x 1366 2011 2011-3 2066

User questions & answers

Question:	Will this fit a 9900k i
Answer:	Yes
Question:	Cpu support, supports intel lga 1200, for 10th gen processors
Answer:	The Intel CPU Socket for the LGA 1200 uses the same mounting points as the Intel 115X CPUs. The ASUS ROG Strix LC 360 AIO comes with the Intel bracket already attached. The included Intel Support bracket for the backside of the main board, lines up with the LGA 1200 mounting holes. Attach and secure the CPU Cooler . I have no issues with using this on my LGA 1200 Intel i9 CPU/Board. Temps for me usually run around 30.0c to 40.0c, and sometimes just a bit higher depending on the games being run.
Question:	This system is compatible with the socket lga
Answer:	Yes, the mounting holes for the LGA 115x are the same for the LGA 1200. It is only the socket itself that is different for each of the CPUs.
Question:	How long are the tubes
Answer:	The tubing from the Radiator to the CPU Cooler is 15 inches

Product features

ROG STRIX LC 360 RGB

ROG Strix LC 360 RGB all-in-one liquid CPU cooler with Aura Sync, and triple ROG 120mm addressable RGB radiator fans

• ROG-designed radiator fans for optimized airflow and static pressure
• Individually addressable RGB and NCVM-coating pump cover accentuates the sleek, modern aesthetics
• Styled to complement ROG motherboards, at the center stage of your build
• Reinforced, sleeved tubing for increased durability

Product description

Aquafusion an addressable RGB liquid cooler for Intel and AMD CPU platforms includes a unique RGB water-block with glossy acrylic cover and luminous aura belt for step-shaped splendid lighting effects Together with Enermax squa RGB addressable fans aquafusion can create dynamic visual experience via motherboard software or included Control box The included Enermax squa RGB fans Featuring Vortex frame design can generate centered and stronger Air pressure especially perfect for radiator With the patented SCT design the cold plate can eliminate the "boundary layer" To increase coolant flow momentum and accelerate heat transfer performance Aquafusion is a one of a kind cooling solution for custom gaming rigs or stunning system builds

• 【Unique square shaped lighting pattern】 SquA RGB features 2 unique square-shaped lighting effect viewable from the front and back of the fan and supports addressable RGB lighting Sync with 16 8 million color options
• 【Up to 40% stronger airflow】 The enlarged Blade surface and air inlet design Due to its unique square frame design can create up to 40% stronger airflow than other RGB fans
• 【Addressable RGB lighting synchronization】 Synchronizable RGB lighting via addressable RGB header of motherboard (+5V/D/-/G) compatible with as US aura Sync Gigabyte RGB FUSION MSI Mystic Light Sync ASROCK polychrome and Razer Chroma
• 【Intel Support】 Intel LGA 1200/2066/2011-3/2011/1366/1156/1155/1151/1150
• 【AMD Support】 AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1

User questions & answers

Question:	will it work on my ryaen 5 2600x
Answer:	Hi Jaron, The pump itself would be the light controller, you'd connect the fans to it and then the pump to the internal USB 2.0 header on your motherboard for iCue control. If you have any other questions please reach out: support.corsair.com
Question:	will this mount to my existing am4 cooler brackets so that I don't have to pull the motherboard
Answer:	it does not use that much it uses nearly MIN:1.5w Max:5 watts
Question:	Can I control the rgb
Answer:	Based on the coldplate design and the mounting method it uses, it is CoolIt product. It is a successor to the Platinum line that was only previously offered with 240mm and 280mm versions.
Question:	I have the squa fan already but do the aio come with part to connect every wire to the mobo
Answer:	Yes, the ELITE CAPELLIX AIOs are the newest ones we've released. If you have any more questions or concerns, please feel free to contact support via our website.

Product features

AQUAFUSION

AQUAFUSION, an addressable RGB liquid cooler for Intel and AMD CPU platforms. Include a unique RGB water-block with glossy acrylic cover and luminous Aurabelt for step-shaped splendid lighting effects. Together with ENERMAX SquA RGB addressable fans featuring vortex frame design can generate centered and stronger air pressure, perfect for radiator. AQUAFUSION is a one of a kind cooling solution for custom gaming rigs or stunning system builds.

Aurabelt Water Block Featuring Addressable RGB Lighting

Premium RGB Water Block with 3D Layer Design with Aurabelt provides Unique Rainbow Effects in 16.8 Million Colors

Unique Square Shaped Fans

Square-shaped RGB Fans Featuring Vortex Frame Design can Generate Centered, Stronger Air Pressure

Enlarged Blade Surface Design

Smaller Fan Hub with Enlarged Blade Surface which Generates More Air Pressure and Outperforms Regular Round Fans

Noiseless Operation

Anti-Vibration Rubber Pads provides Noiseless Stable Operation

Flexible Polyamide (PA) Rubber Tubes

Premium 400mm Weaved Tubing is Perfect for Mainstream System Builds

Shunt-Channel-Technology (SCT)

SCT design enables the cold plate to eliminate "Boundary Layer" for increasing coolant flow momentum and accelerating heat transfer performance.

RGB Lighting Control

• Control RGB lighting with included controller to adjust preferred lighting effects (10 pre-set effects), brightness and speed.
• Sync the RGB lighting with motherboards featuring Addressable RGB headers (3-Pin Assignment: 5V/D/-/G)

Product Dimension (LxWxH)

• Radiator Size 154 x 120 x 27 mm
• Fan Size 120 x 120 x 26.7 mm

Product description

Asetek is the global leader in liquid cooling AIO solutions for gaming PCs and DIY enthusiasts.



The Premium Intel LGA1200/115X/13XX Retention Kit is for mounting Asetek-based AIO liquid CPU coolers/AIO water coolers to Intel LGA1200/115X/13XX-based motherboards. This retention kit is not intended for other sockets. This kit is compatible with liquid coolers from NZXT, ASUS ROG, Thermaltake, GIGABYTE, EVGA, Fractal Design, XPG, Zadak, Intel and Cryorig.



With the Intel LGA1200/115X/13XX Cooler Retention Kit, you'll have all of the installation hardware you need to easily and quickly secure the pump and cold plate assembly to the motherboard. Like all Premium Retention Kits from Asetek, the high quality finish provides a sleek and professional look.

• EASY SETUP AND MOUNTING: The Premium Intel LGA1200/115X Retention Kit provides you the installation hardware you need for easy setup and mounting of Asetek-based liquid CPU coolers/AIOs to Intel LGA1200/115X/13XX-based motherboards
• SLEEK AND PROFESSIONAL LOOK with the high quality finish on items in the premium retention kits
• KIT CONTENTS: The Premium Intel LGA1200/115X Retention Kit includes 4 standoffs, 4 thumbscrew nuts; 1 Intel LGA115X/13XX retention ring; 1 optional retention ring clip - compatible with Gen4 Asetek pump; Asetek part number 35-150-0000014
• BACKPLATE INCLUDED: The Premium Intel LGA1200/115X Retention Kit also includes a backplate for LGA1200/115X motherboards
• COMPATIBLE WITH liquid coolers from NZXT, ASUS ROG, Phanteks, Thermaltake, GIGABYTE, EVGA, Fractal Design, XPG, Zadak, Intel and Cryorig

User questions & answers

Question:	For the square bracket how far are the holes apart
Answer:	Well I can tell you it’s probably the screen because I’m having a similar issue. Mine turns on because I can see a little light at the bottom toward the home button but other than that the screen is black. It worked for two days after changing it out then this happened. Sorry your having the same issue.
Question:	Does this bracket work for evga clc 280 ? i have intel process i7 10700k with lga
Answer:	Nope... wrong size. Make sure you know the proper size screen before ordering. The description should indicate what iPhone model (6S, 6S Plus, etc.) the screen will fit. Good luck!
Question:	Will this fit intel cpu with LGA 1150 socket
Answer:	I wouldn't reccomend it without replacing the original home button with the one it came with as it does not work (touch ID)
Question:	Will the lga115x version work with an lga1200 motherboard using evga clc
Answer:	This item is a full screen replacement piece, with the screen protector you place on last. All the tools you need. This is not an easy feat. That piece is a part of the installation process. This is not just a cover or a case. It is like 1/2 of the thickness of the phone. You have to be a little text savvy to be able to do this. I could not, my husband did it. It is sort of one of those questions "if you have to ask what that piece is, you may not want to take on this project yourself" kind of thing.

Product description

Liqmax III A RGB, An addressable RGB AIO cooler for Intel and AMD CPU platforms, is designed to sync with ASUS Aura Sync, gigabyte RGB FUSION, MSI Mystic Light Sync, as rock polychrome, and RAZER Chroma to display 16. 8 million colors and dynamic lighting effects. The dual chamber design water block has a central coolant inlet (CCI) Structure, combined with the shunt-channel technology (SCT) on the cold plate, It is able to inject the coolant at the hottest spot to prevent heat surges and shorten the coolant flow path, resulting in faster heat transfer. In addition, the dual-convex blade is able to generate Air pressure and high-volume Air flow to provide optimal cooling performance. Liqmax III A RGB cooler is an ideal choice for mainstream water-cooler addressable RGB Gaming rigs.

• Luminous addressable RGB fan and aurabelt water block display 16. 8 million colors
• Dual Chamber water block design
• Patented Shunt-Channel-Technology (SCT) boosts thermal conductivity and eliminates any heat surges
• Dual-convex fan blade creates high volume air flow (72. 1 CFM)
• Intel LGA 1200/2066/2011-3/2011/1366/1156/1155/1151/1150
• AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1

User questions & answers

Question:	Are these fans quiet
Answer:	Yes very quiet at base speeds but of course gain dB when increasing fan speeds
Question:	Does this have the same corrosion issues as the threadripper version
Answer:	The corrosion issues with our version 1 threadripper coolers had been addressed and fixed.
Question:	Is this a 12v, 4 pin system or not
Answer:	Our addressable RGB products uses 5v 3-pin system. Please check out our ELC-LMT120-HF which is RGB and uses 12v, 4-pin header system.
Question:	Does it include thermal paste
Answer:	Yes, thermal paste is included

Product features

LIQMAX III 360 ARGB

LIQMAX III ARGB, a CPU AIO cooler is designed to sync with motherboards that have a 5V Addressable RGB header. By synchronizing with motherboard software, LIQMAX III ARGB can display 16.8 million RGB illuminations. LIQMAX III ARGB 360mm radiator model also includes a RGB control box for users to select preferred lighting effect and no software needed.