13 best aio cpu water cooler

• COOLER THAN OTHER AIO WATER COOLERS: The ARCTIC Liquid Freezer II has a more efficient cool plate, pump and radiator that makes a difference among other AIO water pc fan coolers
• 15°C LOWER VOLTAGE REGULATOR TEMPERATURE: An additional 40 mm VRM fan (PWM controlled) next to pump can provide extra cooling for the base and voltage transformer
• INTEGRATED CABLE MANAGEMENT: The PWM-cable of the fans are integrated into the sleeved tubing. Thus there is only one short cable visible from the pump to motherboard replacing the usual cable mess
• 80% LESS POWER CONSUMPTION: Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise If no cooling is needed
• MAINTENANCE-FREE WATER LOOP: The water loop is sealed and with high quality fiber-reinforce EPDM tubing you do not have to worry about refilling

Product features

Efficient, in-house developed pump

Unlike many of our competitors, we went to great lengths to develop the water pump. The result is greatly reduced humming and higher efficiency. Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of of 0.8 W at no load, 2.3 W under normal load and a maximum of 4.3 W under full load for the entire AiO.

Premium class radiator

Unlike most other all-in-one liquid cooling manufacturers, we rely on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.

Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 ° C lower temperature increase in the temporary turbo mode of modern CPUs.

Smooth VRM fan

Small fans have a reputation for being particularly loud and not very durable. However, we have developed a quiet and durable diagonal fan especially for the Liquid Freezer II and are 100% convinced that this 40 mm fan is just as durable as our other case fans. In the unlikely event that it should fail, ARCTIC will send you a replacement free of charge and easily, without a need to replace the entire unit.

The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by over 10 ° C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.

High quality hoses with integrated cable management

The fiber-reinforced, long EPDM tubing of the Liquid Freezer II enables installation even in large cases and effectively prevents the cooling liquid from evaporating, so that you do not have to worry about refilling the compact water cooling system.

It also hides the cables of your radiator fans thanks to sophisticated cable management. So you only have to connect a plug to the mainboard, saving valuable time during installation. In the end, you won't need to hide any more cables and your view is reduced to just the essentials.

Size & Weight

Radiator: 277 x 120 x 38 mm

Pump (w/o tubes) 98 mm x 78 mm x 53 mm

Tube Diameter: Outer: 12,4 mm // Inner: 6,0 mm

Tube Length: 450 mm

Weight: 1191 g (Fan, Radiator, Pump, Tubes)

Product description

MasterLiquid ML240 Mirror



ENHANCED VISUALS

With its gloriously mind-bending infinity mirror optics, the MasterLiquid ML240 Mirror supports a plethora of ARGB colour effects, which can be assigned directly via native on-board ARGB motherboard software. For users with older system architecture, these effects can be instead assigned via pre-set modes on the wired mini ARGB controller (included).



ENHANCED PERFORMANCE

The Master Liquid ML240 Mirror features Cooler Master’s latest 3rd Gen. dual-chamber pump which boasts improved flow rates and triple industrial-strength anti-leak gaskets for extreme durability (70,000 hours). The 240mm radiator’s cooling performance is also enhanced via a 25% increase in internally aluminium fin surface area combined with the latest SickleFlow V2 fans. Each 120mm workhorse SickleFlow fan (2.5 mmH₂O, 62 CFM, 650~1800 RPM) also includes a two-tier anti-dust prevention mechanism for improved durability (160,000 hours) and noise reduction (8~27 dBA).



ENHANCED COMPATIBILITY

Whether it’s an AMD- or Intel-chipset socket, the ML240 Mirror is ready to be fitted via its universal bracket mount (included) which can accommodate LGA 2066 / 2011-v3 / 2011 / 1151 / 1150 / 1155 / 1156 /1200 and AM4 / AM3+ / AM3 / AM2+/ AM2 / FM2+ / FM2 / FM1 sockets.

• ARGB INFINITY MIRROR - Spectacular ARGB lighting with infinity-mirror effects can be assigned either directly via motherboard software (Mystic Light, Aura Sync, Fusion 2.0, Polychrome) or via wired controller (included)
• 3RD GEN. DUAL-CHAMBER PUMP - A copper-plate heat exchanger anchors Cooler Master’s latest 3rd Gen. dual-chamber pump, which features greater water volume capacity, improved flow rate between chambers, and triple industrial-grade EPDM rubber gaskets
• 25% MORE SURFACE AREA - The radiator’s internal aluminium channels and fins have been significantly deepened within its sleek 240mm frame, resulting in improved heat dissipation and cooling performance
• DUAL 120MM SICKLEFLOW V2 FANS - Ultra quiet rifle-bearing, 7-blade, Air Balance 2.0 fans deliver superior air pressure (2.5 mmH2O) and volume (62 CFM), while the reinforced frames improve overall structural durability and noise reduction (8~27 dBA)
• UNIVERSAL SOCKET COMPATIBILITY - Fully compatible with Intel LGA (2066, 2011-v3, 2011, 1151, 1150, 1155, 1156,1200) and AMD (AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1) CPU cooler sockets - includes thermal paste, universal bracket and mounting screws

Product features

3rd Gen. Dual-Chamber Pump

The dual chamber design separates cold incoming and hot outgoing liquid currents thereby improving heat dissipation.

The PPS (Polyphenylene sulfide) and glass fiber housing resists a broad range of chemicals and is unaffected by moisture or immersion in water.

Consequently, the pump is lightweight and impervious to oxidation and corrosion.

ARGB Motherboard Compatible

The pump can be directly connected to ARGB motherboard software* such as Mystic Light, Aura Sync, RGB Fusion 2.0, and Polychrome Sync.

*For non-ARGB motherboard PC's, a manual controller is included.

Fits Intel & AMD CPU Sockets

A universal mounting bracket fits a broad array of CPU socket types (thermal paste included).

• Intel LGA 2066, 2011-v3, 2011, 1200, 1156, 1155, 1151, 1150
• AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

Product description

The Master Liquid ML360R RGB all in one liquid CPU cooler is custom, inside and out. Our low profile dual chamber pump outperforms its single chamber predecessors in heat transfer. The MasterFan Air Balance fans work with our characteristically sturdy build quality to keep this thing as quiet as a library. Addressable RGB LEDs are installed on both the pump and fans for full color customization that can be controlled through the provided controller. Kink free, factory sealed FEP tubing now comes sleeved for a premium look. Screw it in and experience the quiet muscle of liquid cooling without ever worrying about refills or maintenance. Enjoy the work of decades of thermal innovation.

• Exclusive tech cooler master controls quality and builds on decades of innovation with 100 percent in house design and manufacturing
• Dual dissipation our low profile dual chamber pump enhances performance and durability over our last gen single chamber pump designs; Sizable performance leaps over last gen technology
• 360 millimeters radiator our aluminum 360 millimeters large surface radiator will remove excess heat from the CPU and cool with maximum efficiency
• Addressable RGB LED addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+ (To be released soon)
• Sleeved FEP underneath sleek black sleeves, FEP material beats rubber tubing in keeping liquid where it belongs inside the cooler; Fan air flow: 66.7 CFM (Max); Fan air pressure: 2.34 millimeter H2O (Max)
• CPU socket support: Intel LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	I Bought the lc240e but does ot come with controller
Answer:	IT should include controller and cable
Question:	What does the legacy rgb header on the cotroller do? can i hook other rgb fans or lights up with it
Answer:	The way I have it hooked up is through Cooler Master’s 1 to 3 way splitter on an addressable rgb headed on my Asus z370-e Mobo. You can attach other rgb plugs to that but I’d suggest go straight to your mobo
Question:	Can you mount this at the top of the coolermaster 500M
Answer:	Hello Floyd, You likely won't be able to mount this on either 500M(H500M or the MC500M). The MC500M can only support up to a 280mm radiator on top. The H500M can support a 360mm radiator on top, but it is limited to 43mm clearance from the top. This cooler's thickness is 50mm. CM-PNguyen
Question:	Does it include thermal paste with the cooler
Answer:	Hello, Yes, this cooler comes with thermal paste for the installation. CM-PNguyen

Product features

Cooler Master MasterLiquid Addressable RGB AIO CPU Liquid Cooler 28 Independently-Controlled LEDs Triple 120mm ARGB Air Balance MF

The PPS (Polyphenylene sulfide) and glass fiber construction resists a broad range of chemicals and is unaffected by moisture or immersion in water. Our pump is light and impervious to oxidation and corrosion

Custom design low resistance radiator allows higher flow rate, heat exchange efficiency and provides unmatched cooling performance.

Double tubing FEP tubing makes it durable yet flexible. Sleeved tubing on the exterior to give it a premium look.

MasterFan MF120R ARGB provides a specific air cooling solution ideal to maximize air pressure for AIO liquid cooling. Designed for Builders with Addressable RGB-enabled PCs, you can personalize the color of your fans to match your PC perfectly.

• 【Better Heat Dissipation】The cpu water cooler equipped with 240mm radiator and 2x120mm PWM fans to make sure excellent heat transfer from cpu.
• 【RGB Lighting】RGB lighting on pump and fans are adjustable to match your PC build.
• 【Two-way RGB Control】The Addressabe RGB lighting can sync with motherboard, a remote control is included for non RGB motherboards for customize colors.
• 【PWM Fans】Dual 120mm RGB PWM fans deliver a blast of color and improved airflow for extreme CPU cooling performance. Max. Air Flow: 55.2CFM ; Noise Level: 16.3～33.5dB(A)
• 【Compatibility】Intel LGA2066/2011/1366/1151/1150/1155/1156/1200 & AMD AM4

User questions & answers

Question:	Is it compatible/work well with amd ryzen 9 3900x
Answer:	Yes, it is compatible with the amd ryzen 9 3900x.
Question:	Does this come with a bracket that will fit a stock AM4 backplate because my motherboard uses a nonstandard backplate
Answer:	Yes, it comes with the backplate for AM4.
Question:	Not related to the product, but anyone know the song they use in their product video? :D
Answer:	It is exactly the product in the video.
Question:	Does it come with thermal paste on it or no
Answer:	It comes with thermal paste in the package.

Product features

PINKFLOW 240

The PINKFLOW 240 is an all-in-one RGB liquid CPU cooler with a 240mm radiator built for cpu cooling.

RGB Lighting + Sync with Motherboard

The special design with an RGB LED pump head and two RGB cooling fans can sync with motherboard.

DYNAMIC MULTICOLOR RGB LIGHTING

Vibrant RGB LED pump and fans produces vivid lighting effects to match your PC build.

Dual 120mm RGB Fans

The dual 120mm PWM fans deliver improved airflow and produce 16.3～33.5dB(A) of noise when using. Vibrant RGB fans produce vivid lighting effects to match your build.

240mm Radiator + Flexible Tubing

It come with 240mm radiator to ensure excellent heat dissipation. The premium sleeved tubing makes it durable yet flexible to give it a premium look.

Remote RGB Controller Included

Color option can be controlled through the RGB controller in the package.

Product description

The MPG CORELIQUID K360 is a liquid cooler made to perform and look stunning at the same time. MSI's exclusive TORX FAN 4.0 generates supreme airflow to the radiator for rapid cooling. Additionally, a 60mm TORX FAN 3.0 is placed within the water blockhead, providing concentrated cooling to power solutions. The MPG CORELIQUID K360's water blockhead also has a 2.4" LCD, capable of displaying crucial information and customizable graphics such as hardware system performance information, photos and a system clock.

• TIMELESS RELIABILITY - The motor ceramic bearing has been designed to stand up to 100,000 hours of life expectancy.
• TOTAL RGB FAN CONTROL The included RGB fans support custom speed with PWM fan and customizable lighting through software.
• OLED CAP - 60mm fan on pump with OLED screen

Product features

2.4” CUSTOMIZABLE LCD DISPLAY

The MPG CORELIQUID K Series comes equipped with a 2.4" LCD capable of displaying a wide range of hardware system information and customizable graphics.

CONTROL IN YOUR HANDS

Everything ranging from MPG CORELIQUID K Series' fan speed to the ARGB lighting to the LCD display can be adjusted through the MSI Center.

CONCENTRATED COOLING PERFORMANCE

A 60mm TORX FAN 3.0 is placed within the water block to help dissipate heat for the power solutions.

EVAPORATION PROOF TUBING

MPG CORELIQUID K Series’ tubing is constructed with three layers of netted plastic with a reinforced mesh exterior.

THE MOST COMPLETE USER EXPERIENCE

The G.I. (Gaming Intelligence) Mode intelligently detects the temperature of the system. The radiator fans, water block fan, and pump can all have their speed adjusted according to different usage situations.

TORX FAN 4.0

Inspired by teamwork, MSI’s exclusive TORX FAN 4.0 has two fan blades working as one with an outer ring design.

• 【Better Heat Dissipation】The CPU water cooler equipped with 240mm radiator and 2x120mm PWM fans to make sure excellent heat transfer from CPU.
• 【RGB Lighting】RGB lighting on the pump and fans are adjustable to match your PC build.
• 【PWM Fans】Dual 120mm RGB PWM fans deliver a blast of color and improved airflow for extreme CPU cooling performance. Max. Air Flow: 62CFM; Noise Level: 18～26.4dB(A)
• 【Two-way RGB Control】The RGB lighting can sync with the motherboard, a wired RGB controller is included for non-RGB motherboards for customizing colors.
• 【Compatibility】Intel LGA2066/2011/1366/1151/1150/1155/1156/1200 & AMD AM4

User questions & answers

Question:	How long are the hoses on the 360? Long enough to front mount with hoses down
Answer:	They should be long enough. Mine is mounted front with hoses down, and I have a Full Tower case.
Question:	would this need maintenance in the future? Im not sure how water coolers work
Answer:	Yes it will but with the way it’s designed it’s a little difficult to change the liquid out especially if your new to water cooling. I would recommend to check temperatures if it’s higher than than 50-60 Celsius under load and 70-80 with load then would either replace the thermal compound with a new layer if temps don’t change then would recommend to replace the whole thing
Question:	Does this work with intel i7 10th gen (lga
Answer:	Yes, it can work with the LGA 1200 socket.
Question:	What's the RPM on the fans
Answer:	Fan Speed: 700～1500±10%RPM

Product features

ZOOMFLOW 240X SNOW

The ZOOMFLOW 240X SNOW is an all-in-one RGB liquid CPU cooler with a 240mm radiator built for cpu cooling.

RGB Lighting

The special design with an Addressable RGB LED pump head and two RGB cooling fans are adjustable to match your PC build.

Sync with Motherboard

Color option can be controlled through the RGB controller in the package for motherboards without ARGB header .

Dual Addressable 120mm RGB Fans

The dual 120mm PWM fans deliver improved airflow and produce 18～26.4dB(A) of noise when using. Vibrant RGB fans produce vivid lighting effects to match your build.

240mm Radiator + Flexible Tubing

It come with 240mm radiator to ensure excellent heat dissipation. The premium sleeved tubing makes it durable yet flexible to give it a premium look.

Better Heat Transfer

With the bigger pushing motor, the pump cam push more water flow as to take the heat away more quickly.

Featuring the ARGB lighting inside to match your PC build.

• PERFORMANCE COOLING, ZERO MAINTENANCE - The EK-AIO D-RGB is an all-in-one liquid cooling solution for your CPU. It offers all the benefits of a water-cooling solution in a compact, easy to install and maintenance-free design. The EK AIO comes with a universally compatible CPU water-block, along with a pre-filled pump-res combo design for a liquid cooling solution that’s ready to go straight out of the box.
• FITS ALL CPU’S - The EK AIO comes with a universally compatible CPU water-block, fitting all the latest Intel & AMD CPU sockets as well as featuring a tool-less mounting mechanism for easy installation. Requiring just a single radiator mount, with diamond cut rotary fittings for easy tube adjustment, the EK AIO offers compatibility with almost all modern case designs. Socket Compatibility includes: Intel 1150, 1151, 1155, 1156, 1200, 2011, 2011-3, 2066 and AMD AM4
• FULLY CUSTOMIZABLE D-RGB LIGHTING - The EK AIO features fully addressable D-RGB lighting, easily customized to match your set-up via your motherboard or standalone RGB controller. The CPU block features an acrylic light diffuser, giving both a dynamic colour display and smooth lighting transitions for a premium D-RGB display. System Requirements: - 4-Pin PWM Header for pump and fan operation - 3-Pin Addressable 5V D-RGB header
• ULTRA QUIET D-RGB FANS - The EK-Vardar S included with the EK AIO are industrial grade high-static PWM fans, designed and built primarily for high-performance liquid cooling systems. Controlled by either your motherboard or standalone fan controller, the EK Vardar can be adjusted to run at speeds between 550 - 2200RPM for either high airflow or silent running. Each Vardar fan has fully integrated and customizable D-RGB lighting.
• PREMIUM AND DURABLE DESIGN - The EK AIO comes pre-installed with reinforced and sleeved rubber tubing, each fitted with an aluminum cover to ensure they’re ultra-durable. Its diamond-cut rotary fittings allow for easy installation and adjustment of the rubber tubing, featuring a full range of movement to make the EK AIO suitable for installation in even the tightest spaces.

User questions & answers

Question:	does this come with a fan splitter to connect all three fans
Answer:	Yes very quiet at base speeds but of course gain dB when increasing fan speeds
Question:	Does the 240 rad come with 2 fans
Answer:	The corrosion issues with our version 1 threadripper coolers had been addressed and fixed.
Question:	Thermal paste or thermal pad included
Answer:	Our addressable RGB products uses 5v 3-pin system. Please check out our ELC-LMT120-HF which is RGB and uses 12v, 4-pin header system.
Question:	The 360 out of stock
Answer:	Yes, thermal paste is included

Product features

Air cooling vs AIO cooler - What are the benefits?

The CPU is a core component of your system, which is why it's important to use the cooling solution that's right for you.

Traditional air-coolers are great for everyday applications, providing a current of air across the CPU to remove excess heat. When running more intensive applications such as gaming however, you should expect an increase in both temperature and noise output as fans adjust to their maximum RPM.

Unlike a traditional air-cooler, the EK AIO utilizes a closed water-loop, running liquid coolant directly over your CPU to dissipate excess heat. Not only is it more efficient, but unlike an air-cooler this excess heat is then expelled directly out of the case via the radiator fans.

Better cooling efficiency means lower running temperatures, better gaming performance and lower noise output.

State of the art engineering

Designed with our industry-leading expertise, the EK AIO offers the key benefits of liquid-cooling, in one compact and easy to use solution. It uses high quality materials, with our precision engineering, for class leading AIO cooling performance. Built around our custom designed monoblock, it delivers coolant with a custom-loop grade pump, alongside powerful Vardar S fans to ensure high airflow.

Easy install, fits all CPU’s

Offering universal CPU compatibility for the latest Intel & AMD sockets, along with a zero-maintenance design, the EK AIO is liquid cooling made simple. The installation is hassle-free with a fully sealed unit, pre-filled with coolant and with a tool-less CPU block design for a plug-and-play liquid cooling solution.

Fully D-RGB Addressable Lighting

The EK AIO is has a fully customizable lighting display, featuring integrated D-RGB LEDs on both it's CPU block and Vadar D-RGB fans.

The CPU block comes with a frosted acrylic top, ensuring a vibrant colour display with smooth lighting transitions, easily controlled by either a compatible motherboard or standalone D-RGB controller.

Ultra-durable design with diamond cut rotary fittings

The EK AIO comes with reinforced and sleeved rubber tubing, each fitted with an aluminium cover to ensure an ultra-durable design.

Its diamond cut rotary fittings allow for easy installation and adjustment of the rubber tubes, featuring a full range of movement to make the EK AIO suitable for installation in even the smallest cases.

Premium Vadar D-RGB Fans

The EK-Vardar S included with the EK AIO are industrial grade high-static fans, designed and built primarily for high-performance liquid cooling systems. EK-Vardar S is our first choice for radiator cooling, providing unmatched cooling performance and featuring fully integrated D-RGB lighting.

Product description

The Corsair Hydro Series H100i RGB Platinum is an all in one liquid CPU cooler with a 240mm radiator and vivid RGB lighting that's built for extreme CPU cooling. Equipped with 24 individual RGB LEDs H100i RGB Platinum offers a wealth of RGB lighting options via Corsair iCUE software. Two CORSAIR ML PRO RGB 120mm PWM fans run between 400 to 2,400 RPM, alongside an optimized cold plate and pump design that delivers the best ever Hydro Series cooling. Easy to install and compatible with all major CPU sockets, the H100i RGB Platinum pairs killer looks with chiller performance. Cold Plate Material: Copper.

• Two 120 millimeter ML PRO Series RGB magnetic levitation PWM fans deliver a blast of color and improved airflow for extreme CPU cooling performance. Air flow - 75 CFM. Noise level - 37.0 decibels
• 16 Individually controlled RGB LEDs light up the pump head to produce stunning, customizable lighting effects to match your build
• CORSAIR iCUE software allows you to control your cooler’s RGB lighting, monitor CPU and coolant temperatures, and adjust fan and pump speeds, all from a single intuitive interface
• Thermally optimized cold plate and low-noise pump design for high performance, quiet cooling
• Compatible Sockets: Intel LGA 115x, 1366, 2011, 2011-3, 2066 and AMD FM1, FM2, AM2, AM3, AM4, TR4

User questions & answers

Question:	Is this worth getting because the kraken is on sale for 124 and these are like 170 after tax. Seems a bit high
Answer:	Yes you can,i have different rgb fans.
Question:	What six are the hoses on this setup and can it be taken apart to add to the loop
Answer:	They are good temps wise albeit a little noisy. The pump is the same as the ml360r I believe. As a fellow RGB fanatic, I'd recommend getting one of these. https://www.amazon.com/dp/B07PCGYG1V/ref=cm_sw_r_cp_apa_fabc_pVGbGb2P39JQS?_encoding=UTF8&psc=1 Mine looks awesome and is quieter than the included fans.
Question:	Using it on a 2950 threadripper on a x399 taichi board. the usb connector is blocking a dimm slot with lp dimms. any other cable options available
Answer:	Yes. You can use your own fans if you have some already. The mirror version comes with the new Sickle Flow v2 fans however they have no rgb.
Question:	Does this come with pre applied thermal paste
Answer:	No. The leds that illuminat the ring are also illuminating the logo inside.

Product description

The Hydro Series H60 is an all in one liquid CPU cooler with a 120mm radiator built for low noise liquid CPU cooling and bold styling with a white LED lit pump head. Compatible with all current AM4, LGA 1151 and LGA 2066 socket CPUs and equipped with a Corsair 120mm SP Series PWM fan, users can adjust the fan speed between 600 RPM to 1,700 RPM for precise control over noise and airflow. A high density 120mm slim radiator provides greater surface area for superb heat dissipation, while a thermally optimized copper cold plate and low noise pump ensure heat is quietly and efficiently channeled away from your CPU. With tool free easy installation and Corsair engineered cooling, the H60 is everything you need to keep your CPU running fast, cool and quiet. Fan Static Pressure: 2.08 mm-H2O.

• Precise PWM Control: Dynamically adjust fan speed between 600 RPM to 1,700 RPM with a 120 millimeter Corsair SP Series PWM fan, making it easy to minimize noise or maximize airflow
• 120mm High Density Radiator: Experience lower CPU temperatures with a 120mm high density slim radiator
• LED Illuminated Pump Head: White LED lit pump head adds a touch of brilliance to any system build. Fan Airflow 57.2 CFM. Noise Level 28.3 dBA
• Efficient Cold Plate and Pump: Thermally optimized cold plate and low noise pump design for more efficient, quieter cooling; Radiator Material: Aluminum
• Easy to Install: Modular tool free mounting bracket for quick and easy installation onto all current AM4, LGA 1151 and LGA 2066 socket CPUs
• NOTE: Refer user manual before use

User questions & answers

Question:	How does the thermal paste that it comes with compare to arctic silver 5? should i remove the included paste ad apply that instead for greater cooling
Answer:	Technically it should, but not recommended. -CM Myke
Question:	Will this work with 1151 motherboards
Answer:	There 3 pin.but it comes with 3 pin to 4 pin connectors.they thought of everything to give you.nothing will stop you from getting this case.:-) its awesome!!
Question:	does it fit on fm2+ socket? specifically MSI A88XI AC Mini ITX D board.? thank you
Answer:	It can fit a GTX 980 Ti. Most 750Ti's I've ever seen, in-fact all of them, have been shorter than the mainboard. So you'll have more than enough room...though why not go N200 and mATX if you're going for a small and low powered GPU? I've fit a 980Ti in an N200 as well. Hope that helps!
Question:	does this work with am3+ processors
Answer:	MAYBE!If the mother board is an ATX and has horizontal connector on the front edge than NO! the N400 has a recessed motherboard tray, that blocks horizontal connectors on an ATX board.!Amazon should put a warning in their description!WHY CoolerMaster?

Product description

ASUS ROG Strix LC 360 RGB is the perfect solution for RGB enthusiast and delivers high-performance CPU liquid cooling with clean aesthetics Featuring a closed-loop design and addressable RGB radiator fans unleashes the full potential of your unlocked Intel or AMD CPU while further accentuating your build with brilliant multi-color lighting effects

• ROG-designed RGB radiator fans for optimized airflow and static pressure
• Individually addressable RGB and NCVM-coating pump over accentuates the sleek modern aesthetics
• Styled to complement ROG motherboard at the center stage of your build
• Reinforced sleeved tubing for increased durability
• CPU Socket Support AMD AM4 TR4*； Intel LGA 115x 1366 2011 2011-3 2066

User questions & answers

Question:	Will this fit a 9900k i
Answer:	Yes
Question:	Cpu support, supports intel lga 1200, for 10th gen processors
Answer:	The Intel CPU Socket for the LGA 1200 uses the same mounting points as the Intel 115X CPUs. The ASUS ROG Strix LC 360 AIO comes with the Intel bracket already attached. The included Intel Support bracket for the backside of the main board, lines up with the LGA 1200 mounting holes. Attach and secure the CPU Cooler . I have no issues with using this on my LGA 1200 Intel i9 CPU/Board. Temps for me usually run around 30.0c to 40.0c, and sometimes just a bit higher depending on the games being run.
Question:	This system is compatible with the socket lga
Answer:	Yes, the mounting holes for the LGA 115x are the same for the LGA 1200. It is only the socket itself that is different for each of the CPUs.
Question:	How long are the tubes
Answer:	The tubing from the Radiator to the CPU Cooler is 15 inches

Product features

ROG STRIX LC 360 RGB

ROG Strix LC 360 RGB all-in-one liquid CPU cooler with Aura Sync, and triple ROG 120mm addressable RGB radiator fans

• ROG-designed radiator fans for optimized airflow and static pressure
• Individually addressable RGB and NCVM-coating pump cover accentuates the sleek, modern aesthetics
• Styled to complement ROG motherboards, at the center stage of your build
• Reinforced, sleeved tubing for increased durability

Product description

ROTATABLE Cap Mount the cold plate at any orientation, turn the cap up to 270 degrees to keep it upright. RADIATOR PUMP DESIGN The pump has been integrated into the radiator for sound dampening and noise reduction. PUMP MOTOR RESONANCE ELIMINATION A durable three phase motor at the core of the pump generates minimal vibrations for long-lasting operation

• TIMELESS RELIABILITY - The motor ceramic bearing has been designed to stand up to 100,000 hours of life expectancy.
• TOTAL RGB FAN CONTROL The included RGB fans support custom speed with PWM fan and customizable lighting through software.
• ROTATABLE CAP - Mount the cold plate in any orientation, turn the cap up to 270 degrees to keep it upright.
• RADIATOR PUMP DESIGN - The pump has been integrated into the radiator for sound dampening and noise reduction.
• Compatible Socket & CPU: Intel LGA1150/1151/1155/1156/1200, LGA1366, LGA2011, LGA2011-3, LGA2066 / AMD AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2

User questions & answers

Question:	I connected the 3 pin header to motherboard that have jrainbow connector but there still no light on the coller
Answer:	You need to use the msi mystic light software to control the LEDs
Question:	will this work on a ROG Crosshair viii hero mother board
Answer:	Yes it will. I use it on mine.
Question:	Does this work with the msi z390 a pro motherboard seeing that it has a 4pin rgb header or what not
Answer:	If your has the 4 pin header, that is 12 volt RGB header. This unit I believe is set up for the 5 Volt 3 pin ARGB header. NOT COMPATIBLE AT ALL.
Question:	Does it come with thermal paste or do I have to buy that separate
Answer:	It comes with Thermal Paste, but the one I got was junk. It was hard and not usable

Product features

EVAPORATION PROOF TUBING

Constructed with three layers of netted plastic tubing and a reinforced mesh exterior.

RADIATOR PUMP DESIGN

The pump has been integrated into the radiator for sound dampening and noise reduction.

PUMP MOTOR RESONANCE ELIMINATION

A durable three phase motor at the core of the pump generates minimal vibrations.

HIGH THERMAL DISSIPATION

A split pathway through the radiator rapidly dissipates heat.

EXTENSIVE COMPATIBILITY

Intel: LGA 1150, 1151, 1155, 1156, LGA1200, LGA1366, LGA2011, LGA2011-3, LGA2066

AMD: AM4, FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2, sTR4, sTRX4, SP3

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on Intel LGA2066 motherboard. Similar steps for LGA2011, LGA2011-3 socket motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on AMD sTRX4 motherboard. Similar steps for sTR4, SP3 socket motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Step-by-step videos provided by MSI demonstrate the MAG CORELIQUID Series secure installation procedure for a number of Intel and AMD motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on Intel LGA1200 motherboard. Similar steps for LGA 1150, 1151, 1155, 1156, 1366 socket motherboards.

Step-by-Step Installation Videos for MAG CORELIQUID Series

Demonstrated on AMD AM4 motherboard. Similar steps for FM2+, FM2, FM1, AM3+, AM3, AM2+, AM2 socket motherboards.

Product description

The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X Series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year.

• Design: With a re-designed cap and larger infinity mirror ring LED, the new Kraken X allows for adjusting the orientation of the pump head to fit without affecting the direction of the logo
• Bigger And Brighter: 10% bigger infinitty mirror cap allows for more vivid RGB and a rotating cap accommodates re-orienting the logo no matter the direction the cooler is installed
• Better Control: Full CAM integration allows you to manage your Kraken’s performance with precision
• Incredible Performance: The Aer P radiator fans feature a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance
• Simple Installation: Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling
• Compatible Socket & CPU: Intel Socket LGA 1151, 1150, 1155, 1156, 1366, 2011, 2011-3, 2066 / AMD Socket AM4, TR4(bracket not included)

User questions & answers

Question:	Does the software collect information from my computer and send it over the internet
Answer:	You find the specs of the case at coolermaster.com
Question:	will this cooler fit inside a nzxt 710 mid tower
Answer:	You would need to get a Universal Vertical GPU kit in order to do that in this case. It does not in it's stock form. CM-PNguyen
Question:	Does the newest z73 version come with an am4 bracket? the description isn’t clear with which bracket is not included
Answer:	My lights took a bit to figure out. You need to plug the fan and light stuff into that board on the right side (when facing front of case) inside the door. Then give that thing power from your PSU. Then I think you hook up the wire FROM that board into your motherboard. I had it working perfect for a while, but at some point my lights came on and stuck that way. I will fix it eventually, but I have a feeling the lights on this thing are kind of hit or miss. I personally don’t like the lights so I don’t really care much. Oh and there is a button on the top front on the right side that controls the lights. It’s actually an up/down dual button thing. If you hold it for like less than 10 seconds it should toggle it on or off. The up/down toggles through built in modes/colors. I think the top most option is what allows your motherboard to actually control it, but it may be the bottom most, not 100% sure. Check the cooler master pdf of the instructions to see a picture of how that board should work. Do the same for your motherboard to see where to connect the fans and lights. Good luck.
Question:	is thermal paste included
Answer:	I didn't really have an issue.

Product features

Kraken X Series

The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling.

BIGGER AND BRIGHTER

A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.

BETTER CONTROL

CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.

INCREDIBLE PERFORMANCE

RGB channel easily integrates with any RGB accessory, including AER RGB 2 fans.

Product description

CoolerMaster MasterLiquid ML240L RGB V2 is a refreshed design from the popular MasterLiquid Lite Series that elevates the exterior design elements The Pump of the ML240L RGB V2 has been enhanced with the newly designed 3rd Gen Dual Chamber Pump that improves the overall cooling efficiency of the AIO water cooler The radiator surface area has been enlarged to increase the surface area for heat dissipation for optimized cooling performance The ML240L RGB V2 will included the latest SickleFlow 120 RGB fan with a brand new design and Air Balance fan blades that is quieter than before without compromising on air flow and pressure.

• 3rd Generation Dual Chamber Pump for overall cooling efficiency and performance
• New SickleFlow Refreshed exterior design for improved lighting and fan blades for a quiet airflow performance
• RGB Lighting Signature cooling performance with an RGB design for all of the users wanting lighting effects that are fully customizable
• The larger surface area increased the surface area of the fins on the radiator for better heat dissipation
• Industrial grade seal high: Industrial Grade EPDM material to strengthen the seal for improved longevity and Anti-Leaking
• Controller: Included a wired RGB Controller
• CPU socket support: LGA2066, LGA2011-v3, LGA2011, LGA1200, LGA1151, LGA1150, LGA1156, LGA1155, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	Would this work with a z370 sli slim motherbaord
Answer:	The power button is a simple switch. It will click when pressed. CM-PNguyen
Question:	Does the cooler work on a mobo intrl lg1151 socket
Answer:	Yes with the aRGB header plugged into the motherboard - you can use your motherboard RGB software to turn off the fan lights.
Question:	Is the cooler's tdp actually 130w? the listed figure is very low compared to similar cooler master aios
Answer:	Yes there is. 2 x 120mm / 2 x 140mm / 1 x 200mm -CM Myke
Question:	Hi, I have read alot of reviews saying the therr is a design flaw, Can the manufacturer guarantee that the plsstic tabs will not brake
Answer:	Because 200mm fans don't have to spin very fast in order to move a lot of air they're actually pretty quiet. I don't believe the RPM on them can get very high either so even at full speed they'd still be pretty quiet compared to a smaller fan that has to spin at a much higher RPM to get the same amount of airflow.

Product features

MasterLiquid ML240L RGB V2

ML240L RGB V2 is a total refresh of the popular Lite Series. The pump has been enhanced with the newly designed 3rd Gen. Dual Chamber design, improving the overall cooling efficiency of the AIO water cooler. The radiator surface area has been increased for heat dissipation and optimized cooling performance. The latest SickleFlow120 RGB fan is included with a brand new design and Air Balance fan blades that is quieter than before without compromising on air flow and pressure.

New Dual Chamber Pump

3rd Generation dual chamber pump designed for better performance and overall efficiency.

Included Wired RGB Controller & Splitter

Allows you customize colors and light effects.

Double Tubing

FEP makes it durable yet flexible. Sleeved tubing on the exterior to give it a premium look.