8 best cooler master quality fans

Product description

Cooler Master, an industry leading chassis, thermal solution, peripheral, and accessory manufacturer, signals the rebirth of a household name in computing, the Hyper 212 EVO CPU Cooler. It comes packed with an improved tower fin design, heat pipe layout, and upgraded fans and fan brackets that provide an even more extreme value for end users of all types. Dents are created when the heat pipes are sealed. The cut and seal is not a damage, after the heat pipe is full, machine will crimp it. Fan Speed: 600-2000 RPM (PWM) ± 10%, 600-1600 RPM (PWM) ± 10% (EU Version).

• Air flow: 82.9 CFM; Noise level: 36.0 decibels
• Fan dimensions:120 x 120 x 25 millimeter (4.7 x 4.7 x 1 inches)
• Heat sink dimensions: 116 x 51 x 159 millimeter (4.6 x 2 x 6.2 inch)

User questions & answers

Question:	AM4 support
Answer:	Hello Mark, Yes, the 212 Black edition does have support the AM4 right out of the box. CM-PNguyen
Question:	Will this fit a AM3+ motherboard
Answer:	Here is a video of my AM3+ motherboard with this fan inside https://www.youtube.com/watch?v=rM34Jzi-6fg and here is a a video on the Noise Level https://www.youtube.com/watch?v=fTQ2dlrpEHI
Question:	Do you add thermal compound
Answer:	Hello, Yes you would apply thermal compound. There is a small tube included with the unit. CM-PNguyen
Question:	noise
Answer:	Much quieter than a dvd rom spinning up.. Only noise is when I’m playing a severely demanding cpu game. Even then it’s barely noticeable at 2500rpm

Product features

Hyper 212 EVO

The Hyper 212 EVO cooling systems are designed and optimized to provide the best user experience and cooling potential for a new generation of processors. The Hyper 212 EVO now features four Cooler Master patented Continuous Direct Contact (CDC) heat pipes that are tightly packed into a flat array on the CPU Cooler base. This acts as a virtual vapor chamber that dissipates a large amount of heat. The aluminum fin structure has been optimized to provide the perfect performance balance.

Product description

Ventilateur Cooler Master MasterFan Pro 140R RGB 14cm (Noir)

• ADDRESSABLE RGB COLOURS - Addressable RGB that achieves full colour customization. Certified Compatible with Asus Aura, ASRock RGB, and MSI RGB. Can be configured with RBG compatible motherboards or via manual controller pre-sets.
• 140 MM HYBRID BLADE DESIGN- A combination of both jet engine and helicopter blade designs gives you the static air pressure you need (1.6 mmH2O) without sacrificing airflow (90 CFM ± 10%).
• SILENT COOLING - Features Rifle Bearing and sound absorbing rubber pads for peace and quiet (33.5 dBA) even when working overtime (650-1500 RPM ± 10%).
• SMART FAN SENSOR JAM PROTECTION - Never worry about your cables getting snagged or components being mucked up ever again.
• COOLER MASTER QUALITY - With its simple twist-and-play guide and 2-year warranty, the MasterFan MF140R ARGB combines stunning visuals, enviable performance, and easy installation in one complete package.

Product description

MasterFan MF120R ARGB 3IN1, a new member of the MasterFan family, provides a specific air cooling solution ideal for CPU coolers and chassis in-take fans. Designed for Builders with Addressable RGB-enabled PCs, you can feel the flow with full color fun, and perfect match your PC's theme. MF120R series is fitted with multiple layers of our exclusive noise reduction technologies and a perfect blend of fan blade design that put together work in harmony to cool your entire case and its components in silence.

• ADDRESSABLE RGB COLOURS - Addressable RGB that achieves full colour customization. Certified Compatible with Asus Aura, ASRock RGB, and MSI RGB. Can be configured with RBG compatible motherboards or via manual controller pre-sets.
• 120 MM HYBRID BLADE DESIGN- A combination of both jet engine and helicopter blade designs gives you the static air pressure you need (1.6 mmH2O) without sacrificing airflow (90 CFM ± 10%).
• SILENT COOLING - Features Rifle Bearing and sound absorbing rubber pads for peace and quiet (33.5 dBA) even when working overtime (650-1500 RPM ± 10%).
• SMART FAN SENSOR JAM PROTECTION - Never worry about your cables getting snagged or components being mucked up ever again.
• COOLER MASTER QUALITY - With its simple twist-and-play guide and 2-year warranty, the MasterFan MF120R 3IN1 ARGB combines stunning visuals, enviable performance, and easy installation in one complete package.

Product description

MasterFan MF120 Halo a new series to the MasterFan family providing air cooling solution for CPU liquid radiator and chassis in-take With its Duo-Ring Addressable RGB Lighting sporting 24 Individually Controlled ARGB LEDs for the most stunning visual effect on any gaming rig MF120 Halo are fitted with multiple layers of our exclusive noise reduction technologies and sound-absorbing materials for a perfect blend to cool your entire system and its components in silence Hybrid Fan Blade Design combing an Air Balance with a Wave Shape fan blade design for a Static Pressure airflow to tackle heightened impedance and resistance in CPU liquid radiator low-noise or mesh chassis ventilation while boosting overall airflow.

• Duo-Ring Addressable RGB Lighting 24 Individually Controlled ARGB LEDs for a stunning visual effect
• Performance Engineered Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator, low-noise or mesh chassis ventilation while boosting overall airflow
• Silent Cooling Technology Noise Reduction Technology and Sound Absorbing Materials for a quieter and longer lifespan cooling solution
• PWM Fan Controly, Dynamic speed adjustment between 650 rpm to 1 800 rpm minimizing noise or maximizing air flow
• Certified Compatibility Compatible with most of Addressable RGB capable motherboards Aura Mystic Light and Polychome Sync
• Wired ARGB controller Color can be adjusted with just a touch of a button without the need for software
• Included 3 MF120 Halo 120mm fans, plus Wired ARGB controller

User questions & answers

Question:	Please clarify each fan cable distinctly; are the digital argb cables 3-pin and are the pwm power cables 4-pin
Answer:	Google seach 3 pin fan wire diagram thatll give you the answer
Question:	Me gustaría saver si trae el juego de cables para conectarlos todos a una sola coneccion de corriente y rgb
Answer:	Thank you for your inquiry, the overall size of each product is 120mm*120mm*25mm.
Question:	How are the mounting holes on the 200mm fans laid out? will they fit in cases with one screw per corner
Answer:	You can if you plug the fans into a header on the motherboard that controls fan speed, however, the LEDs will follow the power applied to the fan, so if the motherboard commands the fan to slow, the LEDs will be dimmer or not light at all.
Question:	I know it is certified for "asus aura, msi" but can it work with gigabyte rgb fusion
Answer:	Voltage from the pin connector on the mobo, some times you can adjust the fan speed in the the bios to get them to say brighter, or use a fan controller, or hook them up to directly to the psu

Product features

MasterFan MF120 Halo 3n1

MasterFan MF120 Halo, providing air cooling solution for radiators and case intake. Duo-Ring Addressable RGB Lighting sports 24 Individually Controlled ARGB LEDs for the most stunning visual effect.

Fitted with multiple layers of our exclusive noise reduction technologies and sound-absorbing materials for a blend of cooling and silence. Hybrid Fan Blade Design combines an Air Balance with a Wave Shape fan blade for a Static Pressure airflow to tackle heightened impedance and resistance.

Secure Connection

No more worrying about loose connections. The clip secures both ends in place for easier cable management.

PWM Fan Control

Dynamically adjust the speed between 650 RPM to 1,800 RPM, minimizing noise or maximizing airflow.

ARGB Header Extender

The extended ARGB 3 pin plug is also a daisy chain connector for multiple ARGB devices even if your motherboard only has one ARGB header.

Product description

SickleFlow 120 V2 RGB, is our signature cooling performance with a rejuvenated ARGB design, provides a specific air cooling solution. Revised curve blade design to improve airflow and air pressure. A refreshed frosted blade to enhance light dispersion for a more vibrant and luminescent effect. Enhanced frame structure, reducing turbulent flow and noise. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

• RGB Lighting: Signature cooling performance with an RGB design: a perfect choice for all of the users wanting lighting effects that are fully customizable
• New Blade Design: Revised curve blade design to improve airflow and air pressure. A refreshed blade for improved lighting
• Enhanced Fan Frame: Enhanced frame structure, reducing turbulent flow noise increase efficiency
• Sealed Bearing Structure: Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span

User questions & answers

Question:	So how do these all connect? Does it have an rgb hub or are they all daisy chained? What do I need to buy extra to make them work
Answer:	There is a controller included that can connect all 3. If you want to connect to the motherboard then you will need a splitter
Question:	My motherboard does not support RGB and would like to know what controller would be recommended from the manufacturer
Answer:	Probably coolmaster controler. https://www.amazon.com/dp/B07H241TFT/ref=cm_sw_r_cp_apa_fabt1_J4PRFbBMXQE49
Question:	Will they fit the cooler master Q300L
Answer:	I just looked on Google for you. It looks like it will hold all three 120mm fans. I couldn't find the actually specs of the "cooler master Q300L",but I'm pretty sure they will fit. Hope this helps.
Question:	Anyone have issue with leds? mine are not working. at all
Answer:	Mine burned out after a week in my computer fan still works no light , ill never buy it again, chalked it up as a learning lesson.
Question:	How long(inches) is the power wire
Answer:	Don't remember exactly, it seems like it was about the same as the external overall fan size and it had a standard connector on the end, for my purposes I ended up cutting that off.
Question:	Can I get 3 different colors for the same case
Answer:	Yes you can, as long as your PSU hs the extra connections.
Question:	Does this fit on HP ENVY 700-030qe
Answer:	I am unable to find the chassis fan size anywhere on HP's website for your specific Desktop model. Looking at pictures and the diagrams for the hardware upgrade guide posted on HP's website I would hazard a guess that you have an 80mm chassis fan. You can measure your fan or even guesstimate based on the mounting holes on the back of the chassis. An 80mm fan is approximately 3.15 (close enough to 3) inches and a 120mm fan is approximately 4.72 (almost 5) inches. This Cooler Master fan is a 120mm fan and if your stock fan is smaller this one would be too large for the stock mounting location in your case. Here is a link to the guide on HP's website whose diagrams I was using for reference: http://h10032.www1.hp.com/ctg/Manual/c02871896.pdf
Question:	I am interested in the RPM range, and/or CFM? or amount of air moved per minute. Thanks
Answer:	I purchased the 92mm Blade Master 92 version of this fan. The Package lists 800 - 2800 RPM producing 15.7 - 54.8 CFM airflow. Comparing against five other fans that I have here and know the specs on I can confirm that these numbers are approximately accurate. This does not move anywhere near the amount of air my 85 CFM Swellder does, but is considerably stronger than the 43 CFM Arctic F-9s.

Product features

SickleFlow 120 V2 RGB

SickleFlow 120 V2 RGB, is our signature cooling performance with a rejuvenated ARGB design, provides a specific air cooling solution. Revised curve blade design to improve airflow and air pressure. A refreshed frosted blade to enhance light dispersion for a more vibrant and luminescent effect. Enhanced frame structure, reducing turbulent flow and noise. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

Sealed Bearing Structure

Two-tier sealing mechanism, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.

PWM Fan Control

Dynamically adjust the speed between 650 RPM to 1,800 RPM, minimizing noise or maximizing airflow.

Secure Connection

No more worrying about loose connections. The clip secures both ends in place for easier cable management.

Product description

The Master Liquid ML360R RGB all in one liquid CPU cooler is custom, inside and out. Our low profile dual chamber pump outperforms its single chamber predecessors in heat transfer. The MasterFan Air Balance fans work with our characteristically sturdy build quality to keep this thing as quiet as a library. Addressable RGB LEDs are installed on both the pump and fans for full color customization that can be controlled through the provided controller. Kink free, factory sealed FEP tubing now comes sleeved for a premium look. Screw it in and experience the quiet muscle of liquid cooling without ever worrying about refills or maintenance. Enjoy the work of decades of thermal innovation.

• Exclusive tech cooler master controls quality and builds on decades of innovation with 100 percent in house design and manufacturing
• Dual dissipation our low profile dual chamber pump enhances performance and durability over our last gen single chamber pump designs; Sizable performance leaps over last gen technology
• 360 millimeters radiator our aluminum 360 millimeters large surface radiator will remove excess heat from the CPU and cool with maximum efficiency
• Addressable RGB LED addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+ (To be released soon)
• Sleeved FEP underneath sleek black sleeves, FEP material beats rubber tubing in keeping liquid where it belongs inside the cooler; Fan air flow: 66.7 CFM (Max); Fan air pressure: 2.34 millimeter H2O (Max)
• CPU socket support: Intel LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1

User questions & answers

Question:	I Bought the lc240e but does ot come with controller
Answer:	IT should include controller and cable
Question:	What does the legacy rgb header on the cotroller do? can i hook other rgb fans or lights up with it
Answer:	The way I have it hooked up is through Cooler Master’s 1 to 3 way splitter on an addressable rgb headed on my Asus z370-e Mobo. You can attach other rgb plugs to that but I’d suggest go straight to your mobo
Question:	Can you mount this at the top of the coolermaster 500M
Answer:	Hello Floyd, You likely won't be able to mount this on either 500M(H500M or the MC500M). The MC500M can only support up to a 280mm radiator on top. The H500M can support a 360mm radiator on top, but it is limited to 43mm clearance from the top. This cooler's thickness is 50mm. CM-PNguyen
Question:	Does it include thermal paste with the cooler
Answer:	Hello, Yes, this cooler comes with thermal paste for the installation. CM-PNguyen

Product features

Cooler Master MasterLiquid Addressable RGB AIO CPU Liquid Cooler 28 Independently-Controlled LEDs Triple 120mm ARGB Air Balance MF

The PPS (Polyphenylene sulfide) and glass fiber construction resists a broad range of chemicals and is unaffected by moisture or immersion in water. Our pump is light and impervious to oxidation and corrosion

Custom design low resistance radiator allows higher flow rate, heat exchange efficiency and provides unmatched cooling performance.

Double tubing FEP tubing makes it durable yet flexible. Sleeved tubing on the exterior to give it a premium look.

MasterFan MF120R ARGB provides a specific air cooling solution ideal to maximize air pressure for AIO liquid cooling. Designed for Builders with Addressable RGB-enabled PCs, you can personalize the color of your fans to match your PC perfectly.

Product description

The 80mm slim fan is designed for special application spot cooling in Cooler Master chassis. These slim fans are low profile and designed to fit better in CM 690, CM 590 and CM 690 II Advanced and Basic models.

• Efficient 11-blade fan design for increased cooling at lower speeds
• 24.2 CFM Higher airflow to enhance cooling performance. Fan Life Expectancy 35,000 Hours
• Silent operation at 20 dB-A for excellent case cooling
• RoHS compliance for protecting the environment
• Recommended for CM 690 / 590 / 690 II. 3 pin Connector. 2000 R.P.M. ± 10% Speed (R.P.M.)
• Efficient 11-blade fan design for increased cooling at lower speeds
• 24.2 CFM Higher airflow to enhance cooling performance

User questions & answers

Question:	Is the 92mm size a measure of the physical plastic, so that it's 90mm from screw to screw
Answer:	No. Fan blades are plastic
Question:	I would like to use this fan to help cool a rv fridge. which two wires should I use to connect it
Answer:	no mounting hardware
Question:	what is the cfm
Answer:	Probably not forcefully enough Nicely adjustable though
Question:	what adapter do i need to connect these to my power supply? and can i connect all on the single cable
Answer:	There is only one piece of assembly required (aside from plugging in plugs) and that involves screwing in four phillips screws to attach the wire protective cover over the front of the fan.

Product features

Cooler Master Sleeve Bearing 80mm Silent Fan

Features:

• Recommended for CM 690
• 24.2 CFM Higher airflow to enhance cooling performance
• Silent operation at 20 dB-A for excellent case cooling
• Fan Dimensions (L x W x H) 80 x 80 x 15 mm / 3.2 x 3.2 x 0.6 inch
• Fan Rated Voltage 12V DC
• Fan Rated Current 0.12 A
• Fan Power Consumption 1.44 W

Product description

Cooler Master thermal compound

From the Manufacturer

From the Manufacturer



PRODUCT FEATURES



PRODUCT SPECIFICATIONS

• Suitable for CPU, chipsets on Mainboard, VGA card, etc
• Easy to use
• Zif Socket Templates ensure correct applying area with various CPU socket types
• Produces an even layer when using applicator
• Wide range of application temperature

User questions & answers

Question:	how often does this needs to be replaced? also whats the expiration date of the paste? (actually not the same question
Answer:	1. Replacement? well that is not so easy to answer. There are heat tests that can be run to see if heat is affecting the computer but that is too lengthy to get into here. if you are concerned about a home unit (PC) replacement should not be an issue over the life of the computer, unless it is collecting dust and the vents are dust covered. Then when it is cleaned I would suspect heat to be an issue and a professional cleaning and grease replacement should be considered. For sure it must be replaced when a chip cooling coil is lifted or removed; the Cooler Master IceFusion High Performance Thermal Compound 200G RG-ICFN-200G-B1 will solidify over time, and loose some of its thermal transfer qualities. If a cooling fan is lost due to age or dust blockage, replace the grease!2. Not a real expiration. if it starts to harden, then it is NOT useable!
Question:	How much does each tube contain
Answer:	2 grams I think? It's enough to to do a few processor mounts. But 75% of the bottle comes empty. It's not full. It's just enough for a few jobs.
Question:	Is this an adhesive or a grease
Answer:	It sticks very well, but it is non-curing (doesn't harden) so it would not do well if it was the only thing holding the heat sink in place. I would call it more of a grease than an adhesive.
Question:	do i need to use this on the screws that tighten a control board (mother board ) to the mounting panel
Answer:	NO ! This is a thermal compound, designed to be a chemical layer between a source of heat (CPU, GPU) and it's heatsink; This is NOT an adhesive product like Loctite (and you should NEVER use such a product to mount a motherboard!!)

Product features

High Performance Thermal Paste

• Suitable for CPU, chipsets on Mainboard, VGA card, etc.
• Easy to use.
• Zif Socket Templates ensure correct applying area with various CPU socket types.
• Produces an even layer when using applicator.
• Dielectric.
• Wide range of application temperature.

About Cooler Master: What it means to Make It Yours.

Building a PC is a highly personalized journey. We know that components are carefully chosen based on functionality, and aesthetic preference. Your personality is embedded in each of those choices, transcending from hardware to an immersive, custom-built experience. From custom PCs to all-out gaming rooms, we encourage every decision to reflect who you are.

Our components represent so many different personalities because PC enthusiasts don’t fit into just one mold. It doesn’t matter if you’re a student on a tight budget, a graphic designer that’s brand new to building, or a veteran modder of high-end gaming PCs; we offer components to inspire creative freedom in everyone. We believe that personal preference and individual expression leads to innovation.