14 best kvm switch with pushes

• USB powered design saves money and time,plug and play.
• The high-quality new chipset,effectively reducing the computer crash, mouse and keyboard freezed ect undesirable phenomena.
• Plug and play without Adapter, USB 2.0 and USB 2.0 Hub for Printer and USB devices.
• Max Resolution Support 2048*1536, Support DDC and Automatic Identification high quality output.
• 4 Pieces KVM cables included. Be using for Enterprise, Office, Multimedia Teaching, Meeting Room Gaming Room, Home Theater, Research Test etc.

User questions & answers

Question:	The kvm doesn't need a usb input from the pc? i only see vga inputs on the box
Answer:	Yes, it is safe to use with septic systems.
Question:	I have a very old kvm switch. it requires both computers to be turned on for it to work on either computer. does this switch have that requirement
Answer:	It contains citric acid and sodium bisulfate. Does an exceleent job of cleaning. The racks slide in and out so much easier.
Question:	How long are the cables
Answer:	Well, it can be run with dishes in the diswasher if you want to. It also has a pleasant, lemony scent. Bleach, especially in such a small concentration, does not do much for hard water build up/lime scale. For that you need something acidic. If you don't want to use these tablets, a cup or two of vinegar (apple cider vinegar smells better, but any vinegar will do) works fairly well. I have also sprinkled baking soda in the grate in the bottom of my dishwasher, then poured the vinegar in and let it sit a few minutes before running the dishwasher to clean it. The reaction of the vinegar and baking soda helps loosen bits of food residue caught in the grates.
Question:	Does it work with linux, such as ubuntu or centos
Answer:	No, the main interesting ingredient here is citric acid, which will remove the "hard" water buildup (calcium and magnesium minerals) from the dishwasher, along with anything odor-causing that's living in that buildup. The only thing that'll get your dishwasher cleaning dishes properly again is putting phosphate back in the dishwasher detergent (it was taken out by all the manufacturers in 2010 because some, not even all, the states banned it). You can either go through some contortions to buy sodium hexametaphosphate and add it to regular detergent or buy something like Bubble Bandit (which gets around the bans, even in those legislatively-misguided states, by claiming to be for commercial dishwashing machines) which still has plenty of phosphate in it. You could also try one of the fancy multi-compartment detergent pods (the highest-end Cascade as well as Finish Quantum, possibly others, but do your research for which ones actually work), but those are pretty expensive, especially since the different-colored compartments aren't just a gimmic (likeI, cynically, originally thought) but are actually supposed to release different chemicals at different times in the rinse cycle. Phosphates will both get your dishwasher cleaning again and prevent the buildup in the first place. Their removal from dishwasher detergents is a faux-environmentalism scam, as those contributed less to less than 1% of the phosphates in wastewater, even in those places where phosphate concentrations were a legitimate problem (which is not even everywhere). The biggest culprit is, unsurprisingly, industrial pollution, and that's, equally unsurprisingly, still not banned, despite everyone's dishwashers having been rendered useless. Why pay more for fancy pods with unknown-impact chemicals when good, old phosphates do the job perfectly well?

Product features

4-Port USB KVM Switch

The 4-Port USB KVM Switch with Audio lets you manage 4 computers with just one set of keyboard, monitor, mouse, and a set of speakers/Microphone. The device comes with 4 sets of KVM cables, This cable KVM switch does not require a power supply as it is powered through the USB bus connection. The 4-port KVM switch also supports multiple operating systems including Windows, Sun, and Mac. no additional equipment required. Its compact size makes it ideal for home and business environment.

Integrated USB 2.0 hub

The USB KVM switch features an integrated USB hub,allowing you to share connected USB peripherals between the four controlled PC/Mac computers as though the devices were connected directly.

Plug-N-Play

4-port USB VGA KVM switch does not require a power supply as it is powered through the USB bus connection. It is entirely plug-n-play solutions with no software to run.

Note:Support the Wireless mouse and keyboard(except the multimedia mouse and keyboard)

Product description

The Sabrent 2-Port USB Type-C KVM Switch with 60 Watt Power Delivery (USB-KCPD) allows you to control two computers using only 1 mouse, keyboard, and monitor!



FEATURES

• Control two computers with only one mouse, keyboard, and monitor.
• Switch quickly between two PCs with the push of a button.
• Simultaneously charge two computers via Power Delivery (up to 60 watts per computer).
• USB Type-C Alternate Mode to HDMI 2.0 output with resolution up to 4k@60Hz.
• Support for two USB Type-C Power Delivery input connections.
• Fully compatible with Thunderbolt 3.
• Fully compatible with Power Delivery (PD 3.0) up to 60 watts at 5V, 9V, 15V, 20V.

SYSTEM REQUIREMENTS

• Windows 10 / Mac OS X 10.10 or higher.
• Computers capable of outputting video over USB Type-C (Alternate Mode).
• Computers capable of recharging via Power Delivery (optional).

PACKAGE CONTENTS

• Sabrent 2-port USB Type-C KVM Switch (with PD 3.0).
• Mounting bracket.
• 2 x USB Type-C to Type-C cables (1 meter / 39 inches).
• Quick connection guide.

• CONVENIENCE - Control two computers with only one mouse, keyboard, and monitor. Switch quickly between two PCs with the push of a button.
• POWER - Simultaneously charge two computers via Power Delivery (up to 60 watts per computer). Fully compatible with Power Delivery (PD 3.0) up to 60 watts at 5V, 9V, 15V, 20V.
• USB Type-C Alternate Mode to HDMI 2.0 output with resolution up to 4k@60Hz.
• Support for two USB Type-C Power Delivery input connections. Fully compatible with Thunderbolt 3.
• COMPATIBILITY - Windows 10 / Mac OS X 10.10 or higher. Computers capable of outputting video over USB Type-C (Alternate Mode).

User questions & answers

Question:	I have two computers that i alternate plugging into one monitor with a usb-c cable. will this work, or does my monitor need to support hdmi
Answer:	Yes
Question:	Does this work with freesync? i want to use it for switching my 4k hdr screen between my mac and my pc. i game on my pc and i need freesync support
Answer:	I use approximately 1/4 cup to 3 gallons of water. I have used this ratio for many yrs. Great product.
Question:	I hope to use this as an "imaging station" for laptops & desktops. I understand that this will not power desktops, but will it pass/switch usb&video
Answer:	The S-3 Bucket states "Approximately two ounces of soap per one gallon on water". I have learned through the decades of using this soap is using warm(not hot) water increases its cleaning potential.
Question:	Why are there two pc inputs for display and power? the point of usb-c is to carry all of that over one cable, right
Answer:	I don’t have a pump I previously had a five gallon pail and I had a gallon jug so I just pulled the spout open and you can easily pour a gallon at a time, works great. Hope this help

Product features

Sabrent 2-Port USB Type-C KVM Switch with 60 Watt Power Delivery

• Control two computers with only one mouse, keyboard, and monitor. Switch quickly between two PCs with the push of a button
• Simultaneously charge two computers via Power Delivery (up to 60 watts per computer). Fully compatible with Power Delivery (PD 3.0) up to 60 watts at 5V, 9V, 15V, 20V
• USB Type-C Alternate Mode to HDMI 2.0 output
• Support for two USB Type-C Power Delivery input connections. Fully compatible with Thunderbolt 3
• Windows 10 / Mac OS X 10.10 or higher. Computers capable of outputting video over USB Type-C (Alternate Mode)

Features:

System Requirements: Windows 10 / Mac OS X 10.10 or higher, Computers capable of outputting video over USB Type-C (Alternate Mode), Computers capable of recharging via Power Delivery (optional).

Package Contents: Sabrent 2-port USB Type-C KVM Switch (with PD 3.0), Mounting bracket, 2 x USB Type-C to Type-C cables (1 meter / 39 inches), Quick connection guide.

Product description

Description

HDMI 2 port KVM switch two groups of high-definition video source and USB interface implementation free/ Synchronize switch. Adapter EDID/HDCP. Cab adapt to a variety of complex application environments.



Features

The two lines of high-definition video source and USB Interface implementation

free/Synchronize switch;

Support video resolution max up to 4K×2K 30Hz;

Compliance with HDMI 1.4 standard;

Adaptive EDID/HDCP decryption,Able to adapt to a varlety of complex application environment;

USB devices that can be connected such as: USB mouse, keyboard, U disk, printer, camera,etc;

It can be switched by hotkey mode and host key mode, which is convenient and quick;

HDCP 1.3 standard High bandwidth digital content protection technology;

High compatibility, can auto-match source and display device;

Built-In automatic adjustment system, make the image smooth, clear and stable;

Built-In ESD protection system;

Simple to install and play;



Package list

*HDMI KVM HOST

*USB to DC Power wire

*Wwo USB to USB wires

*Wire Switch button

*User manual

*

*



Please read these Notes carefully：

* Bluetooth keyboard and mouse can not be used.

*Wireless keyboard and mouse can not be used.

* Mechanical keyboard can not be used.

*Microsoft ergonomic keyboard can not be used.

* Our product do not including HDMI cable.

• 【TWO PC SHARE ONE DISPLAY DEVICE】2 in 1 out HDMI USB Switch: one USB keyboard & mouse console.【Wireless keyboard and mouse can not be used】
• 【ULTRA HD 4K VISUAL ENJOYMENT】Max resolution up to 4K x 2K @30Hz. Compatible 3840x2160@30Hz, 1080P, 1080P 3D, 1080I, 720P, 576P, 576I, 480P, 480I.
• 【TWO POWER WAY 】You can power by USB, if your HDMI needs high power, you can use USB 5V extra power.
• 【HIGH COMPATIBILITY PLUG AND PLAY】 Works with Windows, MacOS, Linux, Raspberry Pi, Xbox, PS4, Nintendo etc..
• 【EASY-TO-USE】Switch by hot key or used wire controller to switch

User questions & answers

Question:	What is the Hot-Key combination for the keyboard
Answer:	Yes, you can pair our Hybrid Products with ICE!
Question:	Can you user wireless usb keyboard and mouse with this
Answer:	This formulas is PH balanced as to not remove any existing waxes or sealants.
Question:	The photo shows 2 of the usb a male and usb b male, but its not clear if this arrives with 2 wires? do i need to buy another
Answer:	Yes, For normal maintenance, it it 3oz to a gallon.
Question:	How long are the cables
Answer:	This would do poorly in a foam cannon. The product is not thick like most soaps and doesn't produce a lot of suds. It reminded actually of (defizzed) Mountain Dew. Which is not to say that its not a good wash product - it's just not meant for a foam cannon.

• KVM Switch 2 Port Displayport: one set of USB keyboard, mouse and 2 monitor controls 2 multi graphic-card displayport interface computers. With audio and microphone output, 2 pcs USB 2.0 hub, 2 kits 4.9ft(1.5m) cables and a wire remote push button switch. (Tips: this KVM switch is DP1.2 60Hz version, it doesn't compatible DP1.4 version, 100Hz, 120Hz, 144Hz devices)
• Dual Displayport KVM support Four Switching Way: manual button switching, mouse switching, keyboard hot-key switching and wire remote push button switching.
• SUPPORT THREE DISPLAY MODES: extended display, mirror display and video wall display. Drive-free for Windows 10/7/2000/XP/Vista, Linux, Mac, Debian, Ubuntu, Fedora, Raspbian and Ubuntu.
• Max resolution up to 4096x2160@60Hz 4:4:4, compatible 3840x2160@60hz, 1080P, 1080P 3D, 1080I, 720P, 576P, 576I, 480P, 480I. If you want to buy adapter/converter, link: https://www.amazon.com/CKLau-Converter-Adapter-Computer-Projector/dp/B08PD1DY4P/ref=sr_1_14?dchild=1&m=A11GX3VBOKEGRF&marketplaceID=ATVPDKIKX0DER&qid=1607993835&s=merchant-items&sr=1-14&th=1

User questions & answers

Question:	Can one computer use a single monitor while other computer uses two monitors
Answer:	Thank you for submitting your question. Armor All Ultra Shine Wash and Wax is for use on the exterior only. Armor All Consumer Care.
Question:	Good day. i need a replacement 4.9ft integrated kvm hdmi cable. how can i purchase one from you
Answer:	Its a great wash and wax it depends on how often u wash ur car but 1 wash will last up too 2 weeks up to a month I fully recommend it gives a great bright shine
Question:	Can i connect 2 computers to 1 monitor? also, i plan to get more monitors in the future and connect 2 computers to 3 monitors. would that work
Answer:	Thank you for submitting your question. Armor All Ultra Shine Wash & Wax is safe for use with ceramic coating. Armor All Consumer Care.
Question:	Does logitech wireless mouse+keyboard with unifying usb dongle compatible with this device and can switch between connected CPUs
Answer:	Thank you for submitting your question. Armor All Ultra Shine Wash & Wax is not for use on the interior. Armor All Consumer Care.

Product features

KVM Switch with Display Port

Support HDCP 2.2, HDR10, compatible with all 16:9 widescreen and 21:9 ultrawide monitors. Max resolution up to 4096x2160@60Hz 4:4:4, compatible downgrade resolution.

Support Three Display Modes

Extended display: 2 monitors display are separated content.

Mirror display: 2 monitors display are same content.

Video wall display: shows the whole content by 2 monitors together.

KVM with DP

Support auto detection, auto scan, waking up, with memory function in case of power-down.

Product description

AIMOS 4K @ 60Hz HDMI KVM Switch is a 2x1 HDMI KVM Switch with HDMI2.0 and HDCP1.4 compatibility;

2 port KVM switch Allows you to share the mouse keyboard display with two computers. Is a great accessory for a family, office or other workplace.





▶Metal made and Non-slip design:

♦An exquisite metal case that resists both compression and breakage. The thermal design on both sides can dissipate heat quickly, better protection for the device, more durable.

♦The rubber feet on the bottom of the KVM switch have anti-skid effect, which can also protect your desktop from scratching.





▶Please note the distinction:

♦Maximum support resolution 4K@60Hz (YUV 4:2:0) with 10.2 Gpbs bandwide;

♦Not support resolution 4K@60Hz (YUV 4:4:4) with 18Gpbs bandwide.





▶Customer FAQ:

♦Please update the USB driver of your computer if the keyboard and mouse doesn't work.

♦This 4K HDMI switch two USB port only support wired/wireless keyboard and mouse, other USB device can't be recognized, such as U disk, printer, USB camera, etc.





▶Features:

➊:When the computer is in hibernation,You can wake up your computer with the keyboard and mouse

➋:HDCP 1.4 standard - high-bandwidth digital content protection technology

➌:Adaptive EDID/HDCP decryption, able to adapt to a variety of complex application environment

➍:High compatibility, can auto-match source and display device

➎:Built-in automatic adjustment system, make the image smooth, clear and stable

➏:No need to install the driver, Support hot plug





▶IMPORTANT PROMPT:

♦In order to reach the best performance and support the 1080p above or 4k resolution of the monitor please use HDMI 2.0 cable. Because HDMI 1.4 cable not enough to support the monitor resolution higher than 1080p.





▶PACKAGE LIST:

HDMI 2.0 KVM Switch *1

HDMI1.4 cable *1

USB wire *2

user manual *1

• ▶【 2 Ports USB KVM HDMI Switch Box】: Allows you to control 2 computer with only one set of controls and display screen (mouse and keyboard). High-precision encryption chip, gold-plated interface, High compatibility, Works great to quickly control PCs,Gaming Consoles and Security Systems, Have a Good user experience.
• ▶【 Hot key switch and Wireless device 】support wireless keyboard and Mouse, Hotkey switch: Support Host button switch and hot key switch, quickly switch between 2 sources by keyboard (two hot key: “Ctrl + Ctrl + 1 / 2”, “Scroll Lock + Scroll Lock + 1 / 2”). Powered by USB: No external power adapter required.
• ▶【 Ultra HD 4K visual enjoyment】 Full 10.2 Gpbs bandwidth, Support resolution up to 4K@30Hz (YUV 4:4:4) chroma sampling, making display image more exquisite and realistic, really give a feast for your eyes. Of course it also support 3D and 1080P or lower resolution.
• ▶【Good Compatibility】: Plug and play, using high technology to decode, no need to drive, transmission technology support such as PC, Laptop, Apple TV, PS3/PS4, Xbox, Sony Bluray player, Nintendo Switch, projectors, audio/video receivers and most of the HDMI capable devices. high-speed transmission without lag, no loss of picture and sound quality.
• ▶【100% Satisfaction Guarantee】: The bottom of the KVM switch has non-slip rubber feet, so it can be placed anywhere without scratching your property. As professional manufacturer, every kit is tested strictly before delivery, If there is any problem with the HDMI Switch received, please feel free to contact us through Amazon email.

User questions & answers

Question:	Will this support 100hz @ 1920x1080 resolution with a hdmi 2.0 cable
Answer:	the vga cables that include the usb port to connect PC.
Question:	How many cables (of each type) does this ship with
Answer:	No, you can have only one at a time. It's powered by usb so as long as it has that then it will work with one or two computers.
Question:	I have one logitech unified wireless usb receiver for both keyboard & mouse. how would you connect that
Answer:	The cables are approximately 4ft long.
Question:	Do the computers always see a display even when the KVM is controlling the other computer
Answer:	YES! I have a Windows 10 desktop and a Linux desktop (one drive has Ubuntu and the other CentOS and I can confirm it works SEAMLESSLY with each OS (I even have tested with a work-issued Mac on 10.14 Mojave and no issues there).

Product description

ABLEWE USB Switcher Introduction:

All ABLEWE product comes with one-year warranty and free lifetime technical support.

This ABLEWE USB switch is an excellent choice to expand your laptop’s USB 3.0 port into four, allows 2 computers to share 4 USB Devices, can easily switch between 2 Computers via a push button with LED indicates the active computer, ideal for sharing a printer or scanner in a small office environment. It's also great for use at home if you have multiple PCs



Features:

1.Expand your laptop’s USB 3.0 port into four port

2.2 Computers Sharing 4 USB Devices by manually selected the button. it does not automatically switch between ports

3.USB 3.0 for faster data transmission.

4.No driver needed, plug and play.

5.External hard-drives should be connected to an external power source.

6.It will not charge your devices, it will only sync and transfer data.



Important Notice:

Please use Standard 5V Adapter(Not Included) for powering to ensure better performance of the high power consumption devices.. Any charger with higher voltage output is NOT allowed and may affect the product performance.



Use tips:

1.Connect your computers by using the provided type A to type A cable.

2.Connect your USB devices to any of the four USB ports. The USB devices could be USB flash disk, mouse, keyboard, printer, scanner and etc.

3.Press the switch button to select the computer you need to use.



Package Contents:

1*USB 3.0 switch

2*USB cable(type A to type A)

1*User Manual

• This 4 Port USB 3.0 Switcher allows one button toggle between 2 computers to share 4 USB 3.0 peripheral devices without constantly pull cables or set up complicated network sharing software.
• Ideal for sharing devices such as printer, scanner, mouse, keyboard, card reader, flash drive and other USB devices between 2 computers.
• Great Compatibility, driver-free for Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS, simply plug and play.
• Button and LED indicate lights, you can easily switch between 2 computers by a single click on the button with LED indicating the active computer.
• STABLE Connection and warranty:USB 3.0 sharing switch with a separate micro-usb female port for option power, which optimizing its compatibility with more devices, such as HDD, Digital Video Cameras, SSD etc.ABLEWE provide 12 months warranty and lifetime technical support for this USB switch.

User questions & answers

Question:	Is plugging in micro usb port require if i just want to connect a keyboard and mouse
Answer:	I use this as a switch between 2 computers to a dell triple-monitor docking station to switch 3 monitors between a work computer and home PC and it works nicely. I connected the docking station to this kvm switch through the keyboard/mouse USB connection and it works well so far(only been about 2 weeks). I can tuck it all nicely away and just have the toggle switch within reach. The toggle is magnetic and come with a metal pad you can put anywhere with an adhesive backside. I have no complaints so far.
Question:	Does it allow switching between computers with a hotkey rather than pressing the button on the device
Answer:	Nothing on their product page mentions FreeSync so my guess would be "no it does not" but I can't say for sure. It's possible any FreeSync signals would just be encoded in the video signal and passed through this device, but I don't have a setup with FreeSync to test that with. You might have to call the manufacturer and ask.
Question:	Do i need to have a 5v dc power source for this
Answer:	Yes. Just remember it's a "hard switch". Meaning when you switch to PC2, as far as PC1 is concerned you just unplugged your keyboard, mouse and monitor. Windows tends to lose track of it's open windows when you do this and you have to put them all back when switching back. So if you are looking for a solution where you can quickly switch back and forth you might need to go the route of a more expensive traditional KVM that emulates the K/M and video to the host computer(s).
Question:	Does it come with 2 usb cables?How long are they
Answer:	There are 2 power inputs that you have to supply the power to. If you supply it, that travels through the switch to the computers. If not, you connect them directly to their alternate power supplies. That said, there are two of them, on for each device. When you connect the devices into the switch, everything else goes through the KVM. Including any devices you connect to the KVM on USB, such as webcams, keyboard, thumb drives, etc. I do have strange issues when connecting and disconnecting my laptops. Some times it stops charging the other one and then I have to plug it in again. Outside of that, this KVM works very well.

Product description

The IOGEAR 2-Port USB Cable KVM allows users to share a VGA monitor, a USB mouse, and a USB keyboard between two computers. Users can switch between computers using the wired remote switch button that can be placed on your desk for convenience. It offers an out-of-box solution with no additional cables needed. It supports multiple operating systems including Windows, Sun, and Mac. It is entirely plug-n-play and requires no software to run. It is also powered through the USB bus and thus does not require a power supply to run. It is the ideal KVM for those who want a competitively priced, entry level KVM that will allow them to multitask with two computers at their disposal.

• Users can share a VGA monitor, a USB mouse & a USB keyboard between 2 computers
• 2 ports
• Users can switch between computers using the wired remote switch button
• Offers an out-of-box solution with no additional cables needed
• Plug & play
• 2-Port USB Cable KVM allows users to share a VGA monitor, a USB mouse, and a USB keyboard between two computers
• Supports Windows 2000 or higher, Mac OS 9.0 or higher, Sun Solaris 9 or higher

User questions & answers

Question:	why does this need 2 USB connections to each computer
Answer:	Dear customers, if your keybard and mouse is USB2.0, is works. But we got few cases report that Microsoft ergonomic keyboard can not be used. Our product also can not use on wireless/Bluetooth/Mechanical keyboard and mouse. Our product do not including HDMI cable too. Thank your for being interest on our product. Wish you have good day and health.
Question:	Can this switch between 2 VGA inputs without connecting a keyboard and mouse
Answer:	Sorry, this equipment can only support wired keyboard and mouse which has USB port.
Question:	Could two of the 2-port switches be daisy changed together to switch between 3 computers (mouse and keyboard only
Answer:	Dear customer. Thanks for taking interest in our product. What we can see in the photos is our product do not include any HDMI wires. You should have it by yourself. Sorry our product is not including HDMI wires.
Question:	can I switch computers with a hotkey
Answer:	Dear customer, thanks for your question. From manual measurement, power line is 81cm,USB lines are 141cm, switch lines not including switch bottoms is 191 cm. Hope our answers is what you know about products. Wish you are happy new year.

Product features

2-Port USB VGA KVM Cable Switch

IOGEAR's 2-Port USB VGA Cable KVM allows users to share a VGA monitor, a USB mouse, and a USB keyboard between two computers. It is the ideal competitively priced - entry level KVM solution that allow users to multitask with ease.

Requirements

Console:

- 1 VGA display

- Standard 104 key wired USB keyboard Standard 2 or 3 button wired USB mouse

Computers:

- 1 VGA port

- 2 USB ports

Operating Systems: Windows 7, Windows 8.1, Windows 10 Mac OS 9 to 10.x Oracle Solaris Linux, Unix and other USB supported systems* *Additional drivers and support may be needed

Straight Forward KVM Solution

This USB VGA KVM switch offers an out-of-box solution with no additional cables needed. The USB KVM cables and remote switch are already built in the switch. Conveniently switch between computers by using the 6ft wired remote switch button. This cable KVM switch does not require a power supply as it is powered through the USB bus connection. The 2-port KVM switch also supports multiple operating systems including Windows, Sun, and Mac. It is entirely plug-n-play solutions with no software to run

Secure Switching

The 2-port USB VGA KVM switch also offers a cost effective solution to increase security by allowing users to switch between the Internet connected PC and an Intranet connected PC, a way to boost Internet security.

• HDMI KVM Switch 4 Port: One set of keyboard, mouse and 1 monitor control 4 computers/laptops/PCs. Support wireless keyboard and mouse, Apple keyboard (hot key is changeable), touch screen, OLED screen, wide screen, etc.
• We are certified HDMI adopter over 10 years. Prevent infringement. Excellent image processing and transmission capacity, make the output signal is more smooth and steady.
• KVM with HDMI: compatible 4096x2160@60Hz 4:4:4, 3840x2160@60Hz and 1080P. With a DC5V 2A power adapter, power supply more stability. Drive-free for Windows 10/7/2000/XP/Vista, Linux, Mac, Debian, Ubuntu, Fedora, Raspbian, Ubuntu, etc.
• Four switching way optional: Hotkey switching(NumLock + NumLock + 1 / 2 / 3 / 4 + Enter, or Ctrl+Ctrl+1 / 2 / 3 / 4+Enter, or ScrollLock+ ScrollLock+1 / 2 / 3 / 4 + Enter), mouse switching(click mouse wheel 2 times + left button / right button), manual button switching, wired remote push button switching.

User questions & answers

Question:	Will this work with a microsoft surface pro? does it come with the cables i will need
Answer:	2 port dual monitor kvm switch only support 2 computers and 2 monitors. email us ([email protected]) for more help.
Question:	Does the switch “proxy” edid information when the host isn’t selected to talk directly to the monitor
Answer:	We haven't sale 4.9ft KVM cable on Amazon, but you can buy 6.5ft KVM cable from Amazon. Link: https://www.amazon.com/Extended-CKL-Microphone-Keyboard-CKL-822UA/dp/B07VJGV9C3/ref=sr_1_2_sspa?dchild=1&keywords=dual%2Bmonitor%2Bkvm&qid=1585875928&sr=8-2-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExMjQ3R0VKT1dRRFpPJmVuY3J5cHRlZElkPUEwNjc0NjM2MUlPWUYxMEQ0MDQ0NiZlbmNyeXB0ZWRBZElkPUEwMjg5NzE1MTVZWEM5RksxR0RTVSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1
Question:	I recently bought this bu when I went to set i up today, the box appears to be opened. Its missing 2 of the cables.I set it up and would rather to get
Answer:	Yes, you can. Email us ([email protected]) for more assist. Tips: 1. this triple monitors HDMI KVM switch require your computers all installation 3 graphic-card or above; 2. if your computers without HDMI port, you should buy the adapter with chip. The quality of adapter will affect the function of KVM switch; 3. you should connect one computer into IN1A, IN1B, IN1C of KVM, connect another computer into IN2A,IN2B,IN2C of KVM. Then plug the monitor into HDMI OUT A port of KVM. 4.the KVM switch comes with cable A, cable B and cable C. You should use these cables connect your computers and KVM switch. USB port of cable A is for transfer keyboard signal and mouse signal. HDMI port of cable A is for transfer HDMI signal.
Question:	Does this support uhd 4k, ie: 3840x2160/30p ? another kvm i bought that claimed 4k support only supports 1080p/1080p 3d
Answer:	Yes, it support Logitech unifying receiver, and you should plug the receiver to HUB port of front. Only support push button switching.

Product features

KVM Switch 4 Port

Support auto detection, auto scan, waking up, with memory function in case of power-down.

Certified HDMI Adopter

We are certified HDMI adopter over 10 years. Prevent infringement. Excellent image processing and transmission capacity, make the output signal is more smooth and steady.

Hotkey on/off key

1. This key default turn on, ‘Hotkey on’ light is green.

2. Customers can turn on/off this function according his requirement;

3. If some gaming mouse and multimedia Keyboard don’t work, he need to turn off ‘Hot key on/off’ button, then the issue was solved.

Product description

The 2-Port USB KVM Switch Kit lets you manage two PC’s with just one set of keyboard, monitor, and mouse. Switch between two PC’s with a simple press of a button! Separate sets of KVM cables are included with the KVM Switch, so users can start controlling 2 PC’s instantly. The KVM cables also provide power to the KVM Switch, eliminating the need for a power adapter. Hot Key operations provide immediate access to features such as computer switching, and auto-scanning. With its Hot-Plug, and Audible Feedback, the 2-Port USB KVM Switch is the perfect choice for managing multiple PC’s.

-Control up to 2 computers / servers with one set of console device

-USB keyboard / mouse emulation with 2 sets of detachable KVM cables

-Compliant with Windows and Linux

-High video quality: up to 2048 x 1536 VGA resolution

-Auto-scan and LED display for computer monitoring

-Keyboard status restored when switching between computers

-Computer selection by front panel push buttons, keyboard hot key commands or Windows-based client switching software*

-User definable hot key (Windows only)

-USB interface power method

-Plug & Play and hot-pluggable

-2-year limited warranty

Package Contents:

- TK-207K

-Quick Installation Guide

- 2 sets of USB KVM cables (2 x 1.2 m / 4 ft.)

• 2-port KVM switch with VGA and USB connections to computers
• Device monitoring with Auto-Scan and audible feedback
• High quality 2048 x 1536 resolution for a crisp display
• Support most operating systems and advance mouse designs
• All required cabling included

User questions & answers

Question:	anyone have to unplug and plug in their mouse after it stops responding randomly? Figure out a fix
Answer:	Thank you for your question. Support 100hz @ 1920x1080 resolution, but your computer display card and display must support 100HZ simultaneously.
Question:	I've got a PS/2 keyboard and a USB mouse. Will the PS/2 keyboard connect with a PS/2 to USB adapter? Will any work
Answer:	Mine came with two USB and one HDMI. Connect the HDMI to your monitor. Connect one USB cable to each of your computers. These connect to the back. Then use two of your own HDMI cables to connect each computer to the switch. You have five cables on the rear of the switch,... Two USB (supplied with switch) Three HDMI (one supplied with switch, two supplied by you). Now connect your mouse and keyboard to the front, and enjoy the super convenience. OR, use a cordless/wireless mouse and keyboard, such as Logitech with Unifying Receiver, and plug the little dongle into either front USB port. Hey presto, no wires showing to the front... real clean-looking...Bob's Your Uncle, works a treat... I've been using Logitech Wireless stuff since they first came out.. To me, the best invention since, well, I don't know, computers??
Question:	use with wireless mouse keyboard combo
Answer:	I use Logitech with the Unifying Receiver. I plug the dongle into the 'keyboard' USB.. I've done this for YEARS with wireless Logitech mice, (back when the receivers were bigger than the mice), and a bit more recently wireless keyboards.... Under many different KeyboardVideoMouse KVM switchers. I've never had a problem with the Logitech stuff...
Question:	how long are the included usb cables
Answer:	If you mean 'does the computer not being controlled' see the monitor as 'off' (web search for 'disable monitor off detection'), then the answer is: the non-controlled computer may detect the monitor as 'off' (pc hardware dependent) -- which can cause issues ranging from long delay display startup when switching back to the non-controlled computer to the desktop layout being rearranged on the non controlled computer.

Product features

PACKAGE CONTENTS

• TK-207K
• Quick Installation Guide
• 2 sets of USB KVM cables (2 x 1.2 m / 4 ft.)

• 【Four PCs Shared with One Set Keyboard and Mouse】–Create a simplified workstation with two computers with this 4 port HDMI KVM switch
• 【4 Port HDMI KVM Switch with USB2.0 Port】- Supports Connecting your usb 2.0 port device such as Scanner/USB driver/3D Printer/Monitor Camera
• 【4x1 HDMI KVM Switch Support 4K Resolution】 - SUPERIOR VIDEO QUALITY. 3840x2160 @ 60hz with 4K source and capable monitor. Support auto switching to monitor computers in a specified time interval
• 【4K HDMI KVM Switch is Easy to Operate and Install】 - EASILY SWITCH INPUTS. Keyboard hotkeys, mouse gestures, push button, or remote control (CR2025 battery not included)
• 【★A Higher Level of Keyboard and Mouse Compatibility】 It supports keyboard and mouse pass-through mode (Semi-DDM USB), takes advantage of DDM (Dynamic Device Mapping) technology, compatible with more keyboard and mouse devices. If you need more cables, please purchase: https://www.amazon.com/dp/B075FRFXNX

User questions & answers

Question:	Will this support an acer switch5 tablet, evoluent wired mouse, and microsoft wired ergonomic keyboard along with dell laptop
Answer:	You do not. I run a keyboard, a mouse, and an external drive to 2 different laptops, no additional power. I do have it plugged into the powered usb for my laptop plugged into slot 1. I dont know if that matters.
Question:	How is this different than tesmart item model
Answer:	No, it does not. If you want to switch computers you need to press the button on the switch.
Question:	Will this be compatible with my "high end" Logitech wireless keyboard and mouse using a Logitech Unifying receiver (with mouse gesture switching
Answer:	You only need the 5v external power for devices that require higher than normal power consumption (charging tablet, mobile phone, etc). I connected my LCD monitor through a Kensington VGA to USB adapter that required the external power. Without it the switch wouldn't switch. The micro USB cable isn't included, but it seems we all have them around from older Android devices.
Question:	When the high-end mouse / keyboard is using pass-through mode, does the KVM switch with keyboard hot-keys
Answer:	Yes, comes with 2 USB 3.0 cables, 3 ft. long, not 3.5 ft.

Product features

Keyboard & Mouse Pass-through Mode

Mode light in Blue, It is Keyboard & Mouse Pass-through Mode

Support mechanical keyboard & Mouse, multimedia keyboard & Mouse, wireless with receiver keyboard & mouse, custom keyboard & Mouse.

Don't support bluetooth wireless keyboard & mouse , The keyboard with USB hub, fingerprint keyboard

Note:

Don't support mouse gesture to control KVM to switch inputs in this mode

The Newest 4 Port HDMI KVM Switch FAQ

• This KVM switch could not split & extend desktops for dual monitors
• Audio out jack is fed from the HDMI sound channel
• This KVM switch support DVI to HDMI, but have the delay around 3- 5 seconds
• Please Install CR2025 Battery Before Use Remote Control

Support Multiple Switching Methods

Support front panel button, IR remote control, keyboard hotkeys to control KVM to switch inputs (without button battery, battery model: CR2025)

• DP KVM: one set of USB keyboard, mouse and 1 monitor controls 4 displayport-interface computers. With audio and microphone output, USB 2.0 hub, 4 kits 4.9ft(1m) cables and a wire remote push button switch. (Tips: this KVM switch is DP1.2 60Hz version, it doesn't compatible DP1.4 version, 100Hz, 120Hz, 144Hz devices)
• Max resolution up to 4096x2160@60Hz 4:4:4, compatible 3840x2160@60hz, 1080P, 1080P 3D, 1080I, 720P, 576P, 576I, 480P, 480I.
• Supports HDCP 2.2, HDR10. Supports 16:9 widescreen and 21:9 ultra-wide monitors. Plug and play.
• Drive-free for Windows 10/7/2000/XP/Vista, Linux, Mac, Debian, Ubuntu, Fedora, Raspbian and Ubuntu.
• Two Switching Mode: wired remote push button switching, push button switching.

User questions & answers

Question:	Will this work if I only want to connect 2 computers to one monitor without connecting the other peripherals
Answer:	If you have a wireless keyboard/mouse combination you will only need 1 USB port and can the other to switch a USB printer.
Question:	Will this support 3440x1440 ultrawide at 120hz
Answer:	Can you clairify your question? 1. Are you asking if it will switch between two VGA inputs while using the same mouse and keyboard input? If so, the answer is no. When you click the button, it changes the VGA input as well as the mouse/keyboard input. 2. Are you asking if it will be switch between two VGA without having to connect a keyboad/mouse? Then yes, if you connect just two VGA inputs, it will switch between them with no issues.
Question:	Will this unit have a problem handling 144 mhz refresh rate on a 2k nvidia g sync monitor
Answer:	That might work, but it sounds like it would be a pain to switch between computers. Check out http://synergy-foss.org/. If your 3 computers are all on the same network, you can install Synergy on each one, and share the keyboard and mouse between them. It's seamless. There's no switching involved. Your mouse moves between the monitors as if it was all one big desktop. You can even copy and paste between computers. It's like magic. It's not perfect, but it's pretty cool.
Question:	Does this support monitor emulation, so all machines think they're plugged into a monitor even when they're not the active port
Answer:	Takoma's response is correct. You can use the default Scroll Lock-Scroll Lock-Enter hotkey to do the switching instead of the dedicated button provided. In my experience, the dedicated button seems to switch faster than the hotkey. The screen swaps and keyboard/mouse input seems to come alive in under 2 seconds with the dedicated button, as opposed to using the hotkey which seems to get the keyboard/mouse going in about 2 seconds, but the screen catches up another 2 seconds later for a total of 4 seconds.

Product features

USB Display port KVM

Support HDCP 2.2, HDR10, compatible with all 16:9 widescreen and 21:9 ultrawide monitors.

Display port KVM Switch 4 Port

Support push button switching and wire remote push button switching.

Displayport USB Switch

Max resolution up to 4096x2160@60Hz 4:4:4, compatible downgrade resolution.

Product description

The 8-Port USB KVM Switch lets you manage multiple computers with just one set of keyboard, monitor and mouse. This rack mount device supports USB and PS/2 interface on the console side and USB only on the PC side. Popular hardware platforms such as PC, Linux and Mac are supported. Users can switch between PCs using hot-key or push button for flexible management. Users can also hot-plug PCs on the fly to avoid downtime. The 8-Port USB KVM Switch is the perfect choice for managing multiple PC’s.

-Controls up to 8 computers or servers.

-Supports both USB and PS/2 Interface for console port

-Supports Windows, Linux, Mac OS and more

-High video quality, up to 2048 x 1536 VGA resolution

-Firmware upgradeable via PC port

-Auto-scan for monitored PCs with adjustable scan interval from 10-99 seconds

-Keyboard status restored when switching between computers

-LEDs display for easy status monitoring

-Beeping sound for port switching confirmation (enable/disable)

-Keyboard hot key command or push button switching

-Plug & Play and Hot-Pluggable

-Standard 19” (1U) rack mount design

-2-Year TRENDnet Manufacturer’s Warranty

Package Contents:

- TK-803R

- Quick Installation Guide

- Power Adapter (9 V DC, 1 A)

-Rack mount kit

• PC & CONSOLE PORT INTERFACE: PC: 8 x VGA HDB 15-pin (female); Console: To KVM: 1 x VGA HDB 15-pin (male), To Computer: 1 x VGA HDB 15-pin (male), 1 x USB (Type A)
• MANAGE MULTIPLE PC’S: This 8-Port KVM Switch enables you to control and manage up to 8 computers or servers with just one set made up of a keyboard, monitor and mouse.
• SUPPORTED OS: The KVM switch supports Windows, Linux, Unix and Mac OS
• VIDEO QUALITY: The 8 Port Switch delivers high video quality, up to 2048 x 1536 VGA resolution
• CABLES SOLD SEPARATELY: Compatible cables for use TK-CU06 (6ft), TK-CU10 (10ft), TK-CU15 (15ft)
• USB & PS/2 INTERFACE: This rack mount device supports USB and PS/2 interface on the console side and USB only on the PC side.
• FLEXIBLE MANAGEMENT: Provides the ability to switch between PCs using hot-key or push button for flexible management
• RACKMOUNT DESIGN: The rack mount KVM switch has a standard 19” (1U) rack mount design

User questions & answers

Question:	This question pertains to tk-803r -- the 8-port mountable kvm with ps/2 and usb capabilities: are cables included? and if so, what are their lengths
Answer:	NO - you would have to purchase more. All Surface Pro's only have 1x USB port and 1x mini-Display Port (not HDMI). You would have to purchase a mini-DP to HDMI video adapter (less than $10) to use it with this switch. Microsoft does sell a port replicator (~$150), but it also only has mini-DP video ports (so it does NOT help you to buy that). "Orion" said "Micro Surface Dock" could plug into this KVM, but only "later" said that you still need a video adapter. If you need this HDMI KVM switch, the easiest/best/cheapest thing to do would be to buy a simple "mini-DP to HDMI" video adapter and plug the (now HDMI) and USB into this KVM switch.
Question:	is there a keyboerd shurtcut to swich between each port
Answer:	Its supposed to, but I have not found this magical 1080p/auto edid button that the manual keeps mentioning. So my lg ultrawide is stuck on 1080p for all 4 of my pc.
Question:	Does this come with rack-mount hardware
Answer:	Contact their support email--it is in answers to other questions which I cannot see at the moment while I'm answering this question. They are incredibly responsive--one of my cables was broken and they sent me TWO replacements within a week.
Question:	Has anyone tried this with a Raspberry Pi
Answer:	I have a ultra wide lg monitor and when I connect the kvm switch it did not go all the way to 4k. It was not supported it went to a Max of 1920 x 1080. I didn't like the way the display look. All my icon where big AF!. Kvm i switch is on a drawer...😂😂😂

Product features

KVM Interface

USB and PS/2 interface on the console side and USB only on the PC side mouse and keyboard connections.

Video Resolution

Supports up to 2048 x 1536 VGA resolution.

8-Port KVM

Manage up to 8 computers with this rackmount USB KVM switch.

Product description

HDMI KVM Switch:

USB HDMI KVM Switch allows you to share one USB keyboard, USB mouse, and HDMI monitor to control 2 computers.

It is designed for multitasking with two computers at your convenience, increasing productivity in the office or at home

You can switch between 2 computers using a manual switch located on the top of the KVM unit.

Specification:

1. One USB keyboard, USB mouse, and HDMI monitor control two computers

2. Max resolution: 3640x2160@30Hz

3. No software drivers required

4. No power adapter required

How to Make It Works:

（1）Connect the USB devices to the USB A female connectors on the switch

（2）Connect a HDMI cable to the HDMI OUT interface and the display device

（3）Connect HDMI IN1 and USB IN1 to PC1

（4）Connect HDMI IN2 and USB IN2 to PC2

（5）Press the manual switch button to switch between the two computers

（6） Connect the desktop switch button to the KVM switch through a 3.5mm audio cable, and control the KVM switch with one button.

Operating Systems:

Windows, Mac, Linux system

Note：

Please make sure the HDMI Input Connector 1 and USB B Connector 1 was plugged in the same Host. HDMI IN1 and USB IN1 are corresponding.

Do NOT support HDMI IN1 and USB IN2 mixed insertion.

It can work without power supply.

• 2 Port USB KVM switch box allows you to control 2 computers with only one set of controls (mouse and keyboard). It is great for workstations, test stands or anywhere multitask between computers is required. USB HDMI KVM switch provides a cost-effective way to share one USB keyboard, USB mouse, and HDMI monitor to control 2 computers.
• USB HDMI KVM switch supports high-definition image and supports maximum resolution up to 1920 x 1440. The adapter supports only for video output. But you can enjoy the audio through speakers from PC.
• 2 USB Type A connectors, 2 USB Type B connectors, and 3 HDMI connectors. The 2 In 1 Out KVM Switch between two computers is controlled by the push button on the top of the unit. 2 USB Type B connectors support not only for data transfer but also for the power supply. No external power required.
• Compatibility with Windows 10/8/7 / XP / Vista (32/64-bit), Mac, Linux, Sun Solaris, DOS, Win3, WINNT, Netware, and Unix. The HDMI Switcher Box also supports online games and DVR. Plug and Play: no power supply, or software needed.
• Note: Make sure the HDMI Input Connector 1 and USB B Connector 1 were plugged in the same Host. HDMI IN1 and USB IN1 is corresponding. Do not support HDMI IN1 and USB IN2 mixed insertion.

User questions & answers

Question:	Will this work with a mac and PC
Answer:	I have 2 computers connected (one running Windows 7 Pro and the other Windows Server 2012 R2). After working normally for about 2 weeks, I now find that every time I switch from one computer to the other, I have to do Control Alt Delete and click anywhere to get the mouse to function. A few weeks later, now I cannot get the mouse to function at all on the new Remote Desktop application that allows switching between multiple connections, although the old single connection Remote Desktop accessory seems to work ... For now ... Very disappointing!
Question:	Can i share 1 monitor + keyboard + mouse using the kvm and add extra monitors separately to just one of the pcs
Answer:	Yes this will work with both the PS/2 keyboard and USB mouse. I use an original IBM keyboard and a Microsoft Trackball USB mouse. I purchased a Sanoxy and a Adesso PS/2 to USB conversion cables. They both have been working flawlessly since Oct 1, 2013. The Amazon links for both cables are listed below.http://www.amazon.com/gp/product/B00007AP2O/ref=oh_details_o07_s00_i00?ie=UTF8&psc=1http://www.amazon.com/gp/product/B00008ZPED/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1
Question:	Does this work with wireless bluetooth keyboard
Answer:	I gave up on this system. Never used it with any wireless mouse or keyboard. However, the unit kept on going on the fritz, and I got tired of constantly trying to reset it. Use another KVM now.
Question:	Is it possible to use this with 2 monitors or does it only support a single monitor
Answer:	The TK-407K 4 port USB-only switch has 2x 4' and 2x 6' cables, though each is actually about 3" shorter than that. This is Clearly marked on the package, too bad it's not noted on the web page.

Product description

The SV211DPUA4K 2-Port 4K60Hz DisplayPort Cable KVM Switch with Audio and Remote Switching Control gives you control of two DisplayPort, USB equipped computers with a single monitor, keyboard, mouse and audio peripheral set. 4K60 Picture & Full Audio Support The DisplayPort KVM switch supports resolutions up to 4K at 60Hz and can drive one large DP 1. 2 display with ease, maximizing viewing space. With support for separate 3. 5 mm stereo audio, the KVM switch delivers full audio compatibility across connected computers. OS Independent While supporting most PC operating systems, this dual port DP KVM switch is OS independent which means it works with Mac computers (an adapter may be required) and any other laptops, notebooks, and tablets. Simple to Operate The desktop KVM switch features a remote push-button on a 1. 5 meter (4ft) integrated cable that can be placed in an easily accessible location, as well as keyboard hot-keys, and PC or Mac compatible software for switching between systems. The SV211DPUA4K is backed by a 2-year StarTech and free lifetime multilingual technical support.

• SPACE-SAVING DESIGN: Compact 2 Port DisplayPort KVM Switch w/ built-in cables & remote switching provides USB powered control of two computers from one keyboard, monitor, and mouse
• 4K VIDEO QUALITY: DP UHD KVM switch supports resolutions up to 4K at 60Hz on a single DisplayPort monitor for maximized viewing space
• TECH SPECS: Dual Port KVM | DisplayPort 1. 2 | 4K 60Hz 3840x2160 | Hotkey, Integrated Remote Push Button, Software | OS Independent | Bus Powered | Analog Audio Switching | DisplayPort/USB Console
• COMPACT & USER FRIENDLY: 3 ways to switch between PCs (Dell, HP, Apple & Lenovo): Remote push-button, hotkeys, and manual switching; offers space saving design with minimal footprint
• THE STARTECH ADVANTAGE: Desktop KVM switch comes with a 2-year StarTech and free lifetime 24/5 multilingual technical support based in North America on this 2 port KVM switch

User questions & answers

Question:	Can i add a usb hub for expand usb ports
Answer:	Both devices require HDMI connections
Question:	Does this support wireless keyboard/mouse combo
Answer:	Hello, the main difference is that the HKS0401B2U has a function we call keyboard and mouse pass through mode, so it can be compatible with more keyboards and mouse. HKS0401B2U is our new product, More compatibility！ We have HKS0401A1U and its upgraded version HKS0401A2U, and have HKS0401B1U and its upgraded version HKS0401B2U; A1U and A2U are only different in appearance, but the function is the same. The same is true for B1U and B2U.
Question:	I have a startech mst dp hub. will this work with it to power all three monitors
Answer:	Hello , Thanks for your question need change to passthrough mode then support the high-end mouse ,but could not support mouse gestures. and only the normal emulator mode is supported mouse gestures, but could not support high-end mouse
Question:	hi. can this drive 4 monitors (1920x1080p) via DP 1.2 daisy chain
Answer:	Hello , Thank you for your question . yes , it is support the keyboard hot-keys when the mouse /keyboard pass-through mode .