7 best syba dacs

Product description

Achieve maximum sound on your computer in just minutes! This digital to analog converter allows you to bypass your computer's sound card or headphone output to send digital audio signal through the USB interface. Your sound quality will be pushed to its highest level in your overall music environment.

• The CM6533 intelligent noise reduction chip filters noise and noise, and the sound quality is more Full, and the high-fidelity sound quality is restored.
• The recording standard of the studio with higher than CD sound quality is up to 24bit/96KHZ, so you can enjoy the audio quality of the fever.
• Interface: Mini USB Rev. 1. 1 or 2. 03. 5mm Input Analog Microphone. Shared with Analog Line-in (Stereo) Up to 24bit/96KHz)RCA Analog Output (Stereo)1/4" (6. 3mm) Stereo Headphone Jack3. 5mm Mini Stereo Headphone Jack (If Used, 1/4" Jack Will be Automatically D
• Operation Amplifier: TI LM358
• Support headphones + Microphone to solve the problem of computer sound card damage, single-port notebook can not connect to the microphone.

User questions & answers

Question:	What to do when the mic port stops working
Answer:	Yes, depending on the source of the audio you are listening to. Most built in soundcards in laptops cannot surpass anything above CD quality. If you have the right source, this supports audio in the ranges of DVD Audio, SACD, and 24bit 96KHz vinyl rips.
Question:	Does the device offer for 2 audio sources to play at the same time? For example, game/chat audio from a ps4 and music from a pc
Answer:	It is a standard USB audio interface so it should work and any modern computer, be it Mac, Windows or most Linux.
Question:	can this support 250ohms? I'm getting a headset set soon that's 240ohms and I wanted to make sure this amp can push this headset to its full potential
Answer:	There is no line in port. Source is the usb , which stays plugged in all the time. The computer sound card is replaced with the usb dac, so their is no "mix". You can hear the source on the headphones om the dac, but not the jack on the computer.
Question:	Difference between this and the silver one?syba sonic usb 24 bit 96 khz dac digital to analog headphone amplifier 2 stage eq digital / coaxial outpu
Answer:	the marketing suggests that the 7.1 surround also works with ps4? is this true or false?

Product features

Built In Headphone Amplifier and 2 Level EQ

It is equipped with a headphone amplifier with two outputs, and allows a sampling frequency up to 96 kHz and 24-bit. Enjoy superior audio quality for an unbeatable value for money for this digital to analog converter.

Cmedia CM6533 Chipset

The CM6533 is a USB 2.0 audio chip and two-channel ADC/DAC and S/PDIF interface that makes it suitable for headset, docking, speaker and microphone applications.

USB-Bus-Powered

Built-in de-pop circuitry for reduction of unpleasant popping sound during power on and off. Supports iPhone and Android phone with camera kit and OTG USB cable respectively.

Have Microphone Input

Equipped with high-quality 1/4" and 1/8" headphone jacks, analog stereo RCA, coaxial and optical digital output connections.

Product description

Achieve maximum sound on your computer in just minutes! This Digital to Analog Converter allows you to bypass your computer's sound card or headphone output to send digital audio signal through the USB interface. Your sound quality will be pushed to its highest level in your overall music environment.

• Operation Amplifier: TI LM4562 x1 powered by USB Port
• Sampling Rate for DAC: 24bit/96KHz (Max.)
• Integrated De-pop Function for Suppress Pop Noise During PC Power-up and Shutdown
• Support 3.5mm or 1/4" Jack headphone jack
• Easy Plug and Play. No Driver or Software Installation Required (Except for S/PDIF output)
• SD-DAC63057
• Product Dimensions: 4 x 4 x 3.75 inches

User questions & answers

Question:	Is this able to power a neewer nw 800 mic plunged Into the mic port? The mic needs about 48v of power
Answer:	The Sound BlasterX G5 does not have the Bluetooth feature. Android and iOS devices can only connect to the Sound BlasterX G5 through the 3.5mm audio cable. The Sound BlasterX G5 has to be powered by a USB power source.
Question:	Does this dramatically improve sound for headphones and speakers through laptop?Does it bypass the laptops cheap soundcard
Answer:	Yes, it is also a DAC. You can verify the specifications in the following linkhttp://us.creative.com/p/sound-blaster/sound-blasterx-g5
Question:	Does it works with mac
Answer:	It will power any headphones up to 600Ω. I use the Beyerdynamic DT990 Pro's (250Ω)
Question:	If you have a source plugged into the line in port, can you hear it on the headphones? Does the device mix in the computer audio with the line in
Answer:	The D1 functions as a soundcard, so no, you do not need another sound card. Plug the D1 into the USB port on your computer, and an amplifier or headphones into the D1, and enjoy your music!

Product features

24-bit/96kHz High-Definition Audio

With audiophile-grade DAC/ADCs, the Syba Sonic DAC performs at a stunning 24-bit / 96kHz. This results in the highest possible audio quality!

Connections Covered!

Equipped with high-quality 1/4" and 1/8" headphone jacks, analog stereo RCA, coaxial, 2 level EQ, Microphone input and optical digital output connections.

USB-Bus-Powered

Syba Sonic DAC is USB-bus-powered.

Product description

Built-in DAC supports up to 96 kHz sampling rate with 24 bits resolution, The aux Splitter ensures stable and no loss transmission of audio signal, providing better music playback and clear voice chat.

• Plug and play the USB C to 3.5mm adapter highly compatible for Google Pixel 3/3XL/2/ XL, 2018 iPad Pro, HTC U11 U12, essential Phone, Mate 20 Pro, Samsung Note8/S8/S9 Plus and other support phone + volume control c-type Audio charger adapter
• High quality DAC and Hi-Fi sound performance. Supports sampling rate at 44, 48, 96Khz and 24-bit incoming Bit stream on left and right channels. Dac converts digital Audio signals to analog audio and connects to any headphone via 3.5mm headphone cable.
• High quality chip/module ensures noise reduction and perfect acoustics Audio while in use.
• What you get: Syba USB-C DAC with headphone amplifier, backed by Syba 3 year hassle-free warranty and lifetime customer service.
• Improves your headphones' Audio dynamic effects. Extremely lower power audio playback and exceptional high quality sound. Supports Android profile in-line volume control and microphone function headphones.

User questions & answers

Question:	Will this work with galaxy Note
Answer:	The Nikon 18-55 lens that come with the two lens kit Does take a 55mm uv lens. I'm looking at it as I write this. Mine is a b+w 55 010 uv haze.
Question:	Does it drain the phone battery fast
Answer:	Hello! Yes, the filter comes with the plastic storage case which you can see in the 2nd image that Amazon is using for the product, or directly here:http://ecx.images-amazon.com/images/I/51JjT4FTkBL.jpgPlease let us know if you have any additional questions. Have a great day!Deven MorganEvent Cameras

Product features

Digital to Analogue Converter BES Technic BES3100 DAC

The BES Techinic 24-bit mobile audio DAC with unprecedented dynamic range & ultra low distortion.

Headphone Amplifier Maxim MAX97220AA

USB Bus-Powered mode

No external power required

Output power (W) : 125mW (max) per channel

Plug and Play

Compatible with Windows, Andriod and iOS.

ULTRA PORTABLE - No batteries and slim design.

Product description

This Syba Sonic SD-DAC63094 24-bit USB Audio DAC (Digital to Analog Converter) allows you to send digital audio through the USB interface. The device also includes Bass or Treble boost functions, microphone input, and SPDIF output. With this perfect digital interface between your computer and the music system, the sound quality is pushed to another higher level in your overall music environment.

• Support PCM format, including 44.1kHz, 48kHz, 88.2kHz, 96kHz, 16bit to 24bit range,
• S/PDIF Digital Output - AC3 (Dolby Digital) / DTS Pass-Through
• Recommended Headphone Impedance: 16-100 ohm
• EQ Switch: Bass Boost, Direct, Treble Boost

User questions & answers

Question:	Will this finally allow me to play my 24 bit music files on my PC at it's native 24 bit resolution
Answer:	We are also having trouble with our iMac as well. We have put music on the player, but once we disconnect it for the computer & start the it, we don’t see the music. :/ Here are the steps we went through. ... 1. Take the mini card out of the player (push down and it will pop out ) and insert it into a card reader that you put into the USB port on your computer. 2. The card should now be visible on your computer. 3. Open the card & create a folder named “my music”. 4. Open iTunes on computer and click on the three dots to the far right of a song. (TIP: Might look like the song length in minutes before scrolling over it with your mouse.) 5. And then select COPY from the drop down menu. 6. Go back into the “my music” folder on the card and press OPTION + Click and select PASTE. (Some songs don’t have that option and I don’t know why) 7. Do this with each song you want to add to your card. We only fit about 10 songs because this card that comes with the device is small. You can get a bigger card however. 8. Throw the card into the trash and pull the card reader out of your laptop. Then insert the card back into the device. 9. Follow the woman’s instructions in the first question that’s posted above. 10. HOWEVER: We found our folder labeled “my music”, but nothing is inside of it, despite seeing all the music inside it when it’s in our computer. :/ we also experimented with putting it in different spots on the card, inside and outside of folders. And they never showed up. I think it might be an issue with reading Apple M4p music files since they are somewhat proprietary to Apple devices. The song that comes with the device is an MP3. We might have to just download MP3 music from somewhere on the Internet OR buy the kids Apple iPod Touches for $199. LOL. I will post here if I figure anything out.
Question:	How to connect this with Smartphone
Answer:	It takes 2 hours to charge fill, It can play more than 18 hours. If any question, please contact Evasa, I will do my best to serve you.
Question:	Win7. usb audio device fails to install. driver is correct, but no go. anyone have a fix
Answer:	To delete a previous message, simply record over it by holding the "A" button for 3 seconds, until you hear a beep. Keep "A" pressed while you record, only let go once you're done recording. Please make sure you're using brand new batteries or you may not hear the beep and the device may not function properly. If you have any other questions or facing any issues whatsoever, please contact us and we'll be happy to help.
Question:	Can I use this to just amplify an input on the mic line
Answer:	It works exactly as advertised, you can record your message and the volume is plenty loud. Mine responds to any movement within its range instantly. animal or human. It would be up to you to train your dogs how you wish them to respond to the voice, sound, or message.

Product features

Also Support Digital Output

The SD-DAC63094 USB Audio DAC (Digital to Analog Converter) adds an S/PDIF digital audio output connection to your system for home-theater surround sound support.

Easy Access to Volume Control

Control sound output from the dongle, there is also a convenient external volume control for quick adjustments, an EQ switch for bass or treble boosting, and an LED status bar to display the current sampling rate.

3 level EQ

This USD audio DAC provides a convenient solution to faulty internal sound cards without having to open the computer case.

Compatible with Headset

The SD-DAC63094 DAC also includes standard 3.5mm analog audio/microphone for headphone or headset support and voice chat.

Product description

This Hi-Res Type-C Audio Adapter allows you to bypass your Phone/computer's sound card or headphone output and send digital audio signal through the USB interface and charging back to the device at the same time. It also contains equalizer function with preset profile for the user who need special music enjoyment. With this perfect digital interface between your computer and the music system, the sound quality is pushed to another higher level in your overall music environment.

Our product supports both Windows, MAC, Android and iOS with USB Audio Device Class 1.0 supported when using a USB-C Audio Amplification Adapter when Software EQ is not yet activated.

When its Software EQ function is activated, there will be a quite straightforward to use under the music player under Windows OS while the USB driver mode is needed to specified in some music player in Android OS during the highly variation of that OS since we using software kind of EQ. However, there is no setting option for USB driver mode in MAC OS or iOS. There are the limitation among all USB Software EQ audio controller chipsets and recommended the user use back the OS internal software equalizer.

• Plug and Play The usb c to 3.5mm adapter highly compatible for Google Pixel 3/3XL/2 / XL, 2018 iPad pro, HTC U11 U12, Essential Phone, mate 20 pro, Samsung Note8/S8/S9 Plus and other Support phone + volume control C-type audio charger adapter
• High quality DAC and virtual surround 7.1 performance. Supports sampling Rate at 44, 48, 96Khz and 24-bit incoming bit stream on Left and Right channels. DAC converts digital audio signals to analog audio and connects to any headphone via 3.5mm headphone cable.
• High Quality Chip/module ensures noise reduction and perfect acoustics audio while in use. Hardware EQ / Virtual 7.1 channel functions selected by control button. Volume up / down / mute play / mute microphone functions and controlled by buttons. Output power (W) : 30mW (max) per channel. Signal to Noise Ratio (SNR) : around 90dB (A-weighting)
• Improves your headphones' audio dynamic effects. Extremely lower power audio playback and exceptional high quality sound. Supports Android profile in-line volume control and microphone function headphones.

Product features

Digital to Analogue Converter SSS1630A Chipset

Provide virtual surround 7.1 channels sound effect for mobile phone gamers using ordinary headphone.

Hardware EQ / Virtual 7.1 channel

No batteries and slim design

USB Bus-Powered mode

Output power (W) : 30mW (max) per channel

Plug and Play

Compatible with Windows, Andriod and iOS.

ULTRA PORTABLE - No batteries and slim design.

Product description

As an embedded tube/hybrid amplifier, the SD-DAC63115 gives you the beautiful sound of tubes together with the grunt of solid state circuitry to drive the headphones. It uses 12AU7 Tube or exact equivalents. The 384Hz/32 bit DSD USB Audio DAC is an ultra transparent mastering grade digital audio playback system. The 384Hz/32 bit DSD DAC is capable of converting high resolution PCM audio up to 384kHz, and DSD audio(up to 128x DSD). The DAC allows you to bypass your computer's soundcard or headphone output and send digital audio signal through the USB interface. With this perfect digital interface between your computer and the music system, the sound quality is pushed to another higher level in your overall music environment. Also built in to the system is a Tri-Tone Control Pre-Amp with built in headphone amplifier is different from many audiophile designs for its unique 3-band "Tri Tone" equalizer while most of the equipment has forgotten for many years. The Tone Control allows the audiences to master their song back to “Original” even they are playing with a lower quality MP3 files on a middle-end earphone, or they might enhance different parts of frequency range; high tones (Treble), mid-range (Middle), low frequency (Bass), in order to suit their personal taste for different kinds of music.

• Enjoy performance-oriented tube hybrid sound at an affordable price. Tube input, and discrete, Class AB Solid State output. Built-in de-pop circuitry for reduction of unpleasant popping sound during power on and off. Supports iPhone and Android phone with Camera kit and OTG USB cable respectively.
• Can also be used as a preamp for powered speakers or your power amp. 6. 3mm & 3. 5mm headphone amplifier. Maximum power out for headphone jack is 210mW / 16ohm - 190mW / 32ohm
• Supports DSD 2. 8/5. 6M playback. Asynchronous transfer mode to achieve low jitter. DAC chipset SABRE9018Q2C
• Can be use as a turntable pre-amp supporting mm or MC cartridges.

User questions & answers

Question:	There's a switch labeled "line out on/off," but what does it do? Does it change one of the earphone-out jacks to line-out level
Answer:	No, I do not remember it coming with a fill kit. I had to jury-rig my own with some thin cardboard into a funnel shape.

Product features

Front Panel

1) Direct switch for by pass hardware tone control

2) Max. Headphone Output power

210mW / 16 ohm at 1KHz

190mW / 32ohm at 1KHz

3) Direct switch for Hardware Loudness EQ

Rear Panel

4) Async USB Input

5) Can be use as a Pre-amp supporting turntables with MM or MC cartridges.

6) Audio input to use with Tri-tone Controller and Headphone Amplifier

7) Pre-amp 3 channel output

Tri Tone Control

The Tone Control allows the audiences to master their song back to “Original” even they are playing with a lower quality MP3 files on a middle-end earphone, or they might enhance different parts of frequency range in order to suit their personal taste for different kinds of music.

Product description

SYBA SD-CM-UAUD USB Stereo Audio Adapter Works with PC and Mac System. C-Media Chipset, RoHS. Upgrade, replace, or fix desktop/laptop sound in a minute. which can be used with either laptop, desktop or RaspberryPi system. No driver required, plug-and-play for instant audio playing and compliant with all mainstream operation systems. Simply Plug the Sound Adapter into your USB port, and then plug your headphones into the Adapter.

• Compliant with USB 2.0 Full Speed (12Mbps) Specification
• Compliant with USB Audio Device Class Specification 1.0, Compliant with USB HID Class Specification 1.1
• USB Bus-powered Mode, No External Power Required, Near full 5V power ouput to Microphone
• Connectors: USB Type-A, Stereo output jack, Mono microphone-input jack
• LED indicators: Microphone-Mute Status, Activity FG-UAUDV1-C119

User questions & answers

Question:	Does this work for windows
Answer:	Using these with Windows 8.0 at work, 8.1 at home. Go into settings to select this as output device.Dell M3800 laptop with external usb hub for both systems.
Question:	Is the mic input stereo or mono
Answer:	Mono, here's why: it claims to contain the C-Media CM119 chip (according to a 2010 review and my own 2016 device). You can find data for this chip online which clearly shows mono input only (current version is CM119B, don't know how this differs from the older non-B, but both are mono input).
Question:	Does it work on Linux? (Ubuntu 10.4 here) Thanks
Answer:	This worked without any manual configuration on Ubuntu 12.04 LTS. The kernel in use is Linux 3.2.0-67-generic. It is identified as "Bus 001 Device 004: ID 0d8c:0008 C-Media Electronics, Inc." by lsusb.The relevant dmesg lines are:2845187.137277 input: C-Media USB Audio Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.3/input/input72845187.137524 generic-usb 0003:0D8C:0008.0003: input,hidraw2: USB HID v1.00 Device C-Media USB Audio Device on usb-0000:00:1a.0-1.4/input32845187.215401 usbcore: registered new interface driver snd-usb-audioSo you will have to check compatibility with the kernel and modules used in Ubuntu 10.04. But since your version is quite old, there's a good chance it isn't supported simply because this device may not have even existed in 2010. It isn't listed in the USB device pages, which were last updated mid-2009. https://usb-ids.gowdy.us/read/UD/0d8c
Question:	are any drivers needed
Answer:	no needed any drivers