10 best 3m sata cables

• Tableau SATA to 3M Drive Power Cable - 8."
• Connects with 3M power (male).
• Compatible with the Following Tableau Products: Tableau Forensic Duplicator, Tableau Forensic Imager, Tableau Forensic SATA/IDE Bridge, Tableau Forensic SATA/IDE Read-Write Bridge, Tableau Forensic Universal Bridge.
• Length: 8 inch long cable.
• Faraday Bag: Block Signal, Stop Tracking, Prevent Hacking.

Product features

Product description

Feature:

Cable for connecting newer eSATA devices to older SATA ports

Supports data transfer rates of up to 6.0 Gbps

Fully shielded to protect against EMI/RFI line noise

Lifetime warranty and RoHS-compliant design



Package:

1 x LINESO ESATA to SATA 50cm and 1xLINESO ESATA To SATA 100cm Transition Cables



Warranty

All LINESO items are backed by One Year warranty. Please contact us via email if you have any questions.

• ESATA TO SATA CABLE 2PCS OF PACK (1PCS ESATA To SATA 1M And 1PCS ESATA To SATA 0.5M)
• Supports data transfer rates up to 6 Gbps
• Fully shielded cable to protect against EMI/RFI line noise

Product description

7+15 Sata Male to Female DATA and Power Combo Extension Cable with Locking Latch

The 22 -pin SATA extension assembly contains both 15-pin power and 7-pin data with both female and male connections

No need to purchase additional SATA data cable or SATA power cable, only one cable solves two needs.

Note: Notebooks and desktops have different voltages: this cable of notebooks can only be connected to hard disks less than 2.5", and desktop computers can be connected to hard disks above 2.5" with this line.

Length: 30CM/1FT/12inch

InterfaceA: (7+15) 22 pin SATA Male

InterfaceB: (7 +15) 22 pin SATA Female

Package Included:

1 x Male to Female 7+15 Pin SATA Data Power Cable The 22 -pin SATA extension assembly contains both 15-pin power and 7-pin data with both female and male connections Application:Used for SATA (serial port) hard disk and SATA optical drive, as well as other SATA interface equipment.

• ✪ 22pin(7+15) Sata Male to Female DATA and Power Combo Extension Cable:can extension of a SATA data and power interface and can be used to connect different devices with a 22 pin SATA connector.And can both power and high speed transmission.
• ✪ 15+7 pin sata hdd extension cable:One side is the male head,the other side is the female head.The Slimline SATA cable,you can use this wire, directly connected to the device and the hard disk.Such as SATA (serial) hard drives and SATA optical drives,SSHD,etc.
• ✪ SATA data & power 2-in-1 Extension Cord:The length is 30CM,thin and flexible cabling allows easy routing. The flat SATA data cable has a soft sheath and can be installed effectively and organized in a compact computer case. The power cord is covered with an insulated braided sheath, which does not generate heat during used.
• ✪ 22 Pin SATA Data and Power Combo Extension Cable:Data transfer rate up to 3 Gb/s.Downwards compatible to SATA 1.5 Gb/s
• ✪ TECHNICAL HIGHLIGHTS:The cable female connector with iron buckle shrapnel,which can be firmly buckled after installation to avoid loose connection and various computer failures caused by vibration.

Product description

Just plug-and-play for hard drive enclosures, printers, modems, cameras, and other SuperSpeed USB peripherals. This cable provides a transfer rate of up to 4.8 Gbps when connected with a USB 3.0 compliant host and device. Foil and braid shielding reduces EMI/RFI interference and twisted pair contruction helps reduce crosstalk thus ensuring SuperSpeed, error-free data transfer. Protective overmolded connector is color-coded blue to highlight USB 3.0 connectivity compatibility.

• Compliant to USB 3.0 SuperSpeed specifications; connect your SuperSpeed USB peripheral for TEN TIMES the transmission rate of USB 2.0
• Carries USB 3.0 data signals and power
• Up to 4.8 Gbps bandwidth
• Shielded to protect from interference
• RoHS Compliant
• Connector 1: USB 3.0 Type A Male Connector 2: USB 3.0 Type B Male
• PC and Mac compatible

User questions & answers

Question:	Will this cable work on an lg be14nu40 external bluray writer
Answer:	The product is a USB 3.0 A Male to B Male Cable. If you have a USB 3.0 device, it should work.
Question:	How Many Volts
Answer:	Hello, this is Trey with the manufacturer. This cable operates at 5 volts and 1 amp of power for device operation and charging.
Question:	will this work with a brother laser hl-l2340dw printer
Answer:	This is a USB 3 cable. It has a different connector on the device side, than a USB 2 cable. Does your printer have a USB 3 socket?
Question:	what is the transfer speed
Answer:	Same as the 3.0 USB port speeds

• Slot color is sent randomly:Due to the shortage of raw materials, we have purchased the 2 color card slot for production, randomly send, it does not affect the riser's function.
• More Port option: molex, SATA and Graphic card 6PIN interface, three interface optional. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment.
• LED indicator and fuse are used on the board: Indicates the connection status between your devices.
• 3 Solid Capacitors deliver power to Graphics stably and Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting transmission,This special coil unit absorbs this electromagnetic wave.
• 60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.

User questions & answers

Question:	Hello, Is everything there? the power cables of the graph and everything else ready just to connect it and make it work
Answer:	Hello, You can look it up on Amazon different times Thanks
Question:	can i crossfire with this
Answer:	Hello, You can find an online version of the manual here. (https://fccid.io/2ASK3CT-6164T/Users-Manual/User-Manual-4749740) Please remember that some may vary but this is the latest revision. Hope this helps. Thank you and have a great day.
Question:	can this type of unit be used for gaming, not minng
Answer:	You can use your regular phone wall android charger for it. It comes with the cord but not the base. Any base is acceptable.
Question:	If i could power with any of the three power options, which power option is best/ideal? molex, 15-pin sata, or 6pin to 15-pin sata power cable
Answer:	1. Ensure that the drone and controller are OFF. 2. Then carefully grasp the sides of the white plug using a small pliers or similar tool and remove the plug. (Wiggle and pull) 3. Once the plug is removed, simply slide the battery pack out. DO NOT pull the plug from the wires, doing so can cause the wire(s) to break. Please refer to your owners manual for more information. Thank you and I hope this helps. Have a great day!

Product features

6PIN

MOLEX

SATA

Special USB Cable

60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.Attention.

Adding special coil unit.

Added coil to prevent interference,Long time work will produce electromagnetic waves,affecting transmission，This special coil unit absorbs this electromagnetic wave.

LED Indicator

LED indicator and fuse are used on the board: Indicates the connection status between your devices.

Product description

This 6ft Shielded eSATA to SATA Cable features one eSATA connector and one standard SATA connector, allowing you to connect external drives (with eSATA connector) to a regular Serial ATA data connector. Backed by StarTech.com's Lifetime Warranty.

• SATA to eSATA cable
• SATA (R) to eSATA (R)
• 6 ft
• black
• for StarTech.com 2

User questions & answers

Question:	Length of the cable
Answer:	I've been wearing these probably for 2 or more years now (I have a bad back and helps a lot) Well from the very first pair I bought and just bought a pair today I have taken the ankle strap right off the shoe. YUP and 99.9 % of the time I'm wearing them I'm wearing them with NO SOCKKS and have never ever had a problem falling out of the or anything like that. As for half size I wear 8-8 and a half I got a 9 then went to a 10 (ALL WOMENS SIZE) Today I got a women's size 11 and I know I will be taking off the strap of those too If I'm not "swimming" in the 11 and have to return them with the ankle straps attached BUT if they fit ok off the starps will come OH AND SOMETHING YOU CAN DO TOO to see if they work for you without the strap on. Just put the strap on the top of the top of the shoe don't have to bother taking the strap off just try that instead I forgot I did that with my very first pair and after wearing them like that for awhile realized I could take the straps right off the shoe and have ever since. I love my crocs (bad back problems) helps a lot. I wear mine constantly and have found that for me the inside sole does wear down after time you'll notice how much when you get a new pair. Nothing lasts forever
Question:	will this work on external enclosure with 4 drives that has esata port
Answer:	I have tried the sizes 8 and 9 in women's and the 8 is just barely too short, my heel goes over the back and toes just touch the front, and then I ordered a 9 as the only other alternative. The 9's were WAY too big and bulky. I wear a 8.5 and my feet are 9.5" long. It seems like my Croc wearing days are over even though before they changed the sizing, I wore sz 8 for a decade. Sad because I really want these for gardening and everyday wear.
Question:	I've got an external hdd box with esata port and a mobo with sata ports. Can I boot windows within hdd and box to mobo using this cable
Answer:	I’ve read everyone’s questions and answers, and it’s still confusing to me. Why the manufacturer states Crocs run true to size when it’s obviously not the case is beyond me. Thinking out loud... I wear a size 8. Medium width. Is this the size that will fit me? Or will it be too small or too large/will I need 7 or 9? It shouldn’t be this difficult to order a pair. Fyi ~ I tried on a friend’s pair, hers are a size 6. They fit me perfectly. 😳 ??
Question:	Does it work in reverse? i.e. Can I connect an old internal SATA drive to the eSATA port on my new laptop
Answer:	The most UGLIEST shoes I have ever in my life had on my feet. But for the reason I got myself a pair of them is I have herniated and bulding discs in my back and the minute I put them on my feet for the very first time it was as if they had (the herniated bulging discs had miraculously went away. I was astonished and grateful. Some had told me they had the same problem and bought a pair of these and helped relieve there back problem too. I have been wearing classic crocs now for I think at least 2 or more years now and even thought I do have my days with my back These are still the most comfortable shoes you can put on your feet. TRUE STORY: Was getting in the car happened to look down at my foot and said OMG then laughed out loud because I was still wearing my house slippers (and we all know how comfortable those are) well those are how comfortable these are. I guess you have to ask yourself how much do you want to wear a comfortable shoe in order to get beyond how these look (atrociously) UUUUUGLY Every single pair I've ever bought is the (KHAKI) because they don't stand out so much. It's not as thought I don't like all the colors they come in I do its just that these are a "wide" looking shoe and if I bought or word the Yellow or Orange the first thing I would think of is "duck feet" OR the RED which I love too but would never ever buy they would just remind me of Clown shoes. You know how kids shoes are small and look really cute well I think these are really cute looking on little kids feet as well as all the colors They can get away with it but adults ok you can wear whatever color you like but remember if you think these shoes are UUUUUGLY buying a pair in a nice bright color is just going to bring a lot of attention to your feet.. No getting around the uuuuglyness of these shoes but depending on your circumstances and need for comfortable shoes YOU CANNOT BEAT THE CROCS FOR THAT !!!!

• 6pcs/set CableDeconn High Speed 6Gbps Sata Cable Sas Cable High Quality for Server 1M
• Use for connection the multichannel Removable HDD in computer case, or other sata 7pin devices
• High quality web nylon braided put all 6 sata cables together, can keep a tidy and ventilation case
• High-speed data transfer max up 6Gbps
• Cable Length:1M，18 Month worry-free warranty

User questions & answers

Question:	What is the length in inches
Answer:	20 inches
Question:	The description says they are 1M long which is 39". Only question answered says they are 20". What is correct
Answer:	it is 1m cable

Product features

Specification:

Manufatured with high quality special server wires

Data tranmission safe and stable.

High-quality connect convenient to plug.

6pcs/set length=1m

RoHS compliant.

Package Includes:

1 x CableDeconn High Speed 6Gbps 6pcs/set Sata Cable Sas Cable High Quality for Server 1M

data transfer

High-speed data transfer max up 6Gbps

CableLength:1M

sata 6set cable

6pcs/set CableDeconn High Speed 6Gbps Sata Cable Sas Cable High Quality for Server 1M

whih Many Devices

Use for connection the multichannel Removable HDD in computer case, or other sata 7pin devices

High quality web nylon braided put all 6 sata cables together, can keep a tidy and ventilation case

Product description

Features:

1. 4PIN and two graphics card 6PIN ports are optional power supplies, which can provide power independent of the graphics card and reduce the burden on the motherboard when using more graphics cards.
2. 4 solid capacitors, 60 cm USB 3.0 cable, suitable for all Window systems, for LINUX and for MAC.
3. 180 degree PCI-E to USB adapter, easy to install and can be installed in a few minutes, simple operation.
4. 3 LED lights display working state. Stable resistance makes data more stable and safer.

Description:

The 009S version of the riser kit is the latest and top solution for setting up GPU mining equipment.

Package Included:

12 * PCI-E 16X Riser Board

12 * PCI-E 1X Adapter Card

12 * 60cm USB 3.0 Riser Cable

12* 15 Pin to 6 Pin Power Cable

• The VER009S version PCI-E risers are the newest and top of the line solution for setting up Ethereum/Bitcoin/Litecoin and other GPU mining rigs. 4 High Quality Solid Capacitors on each card for reliable and safe power delivery.
• 60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters
• Reduce motherboard burden, 4PIN Molex and two 6PIN Graphic card interface (two 6PIN interface directing differently) are optional to power, which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards
• This riser kit is compatible with 1x, 4x, 8x, 16x PCI-E slot of the motherboardSuitable for all Window systems, LINUX and MAC
• {{Authorized Tigology Bundle}} Package Includes: 12 x USB cable, 12 x 15 Pin to 6 Pin Power Cable, 12 x PCIE riser board, 12 x PCIE adapter

Product description

YHJIC Note:1.This product is suitable for motherboards with PCI-E slots.Please connect the floppy disk drive when using it.When inserting or unplugging the PCI-E extension cable,make sure that the computer has no power.

2.The internal cable is specially made.Do not replace it with other data cables.

3.To prevent damage to the computer and other equipment,please find the correct cable connection end.

4.Use old flat cables for dual-core cards and 16X motherboards.

5.When plugging in the cable, make sure you know the direction.Do not insert the cable in the reverse or oblique direction to avoid damage to the device.When inserting, please hold the socket of the device before inserting it to avoid damaging the pins of the socket forcibly.

1.No driver is required.

2.Very suitable for setting up Ethereum mining equipment.

3.The 4 holes on the riser clamp are used for installation.

4.LED indicators and fuses are used on the circuit board.

colour: black

Material: PCB+metal

size: board: 130x45mm,USB cable length: 60cm



Package Contents:

6 x PCI-E 16X boards

6 x PCI-E 1X cards

6 x 60cm USB 3.0 cable

6 x 6PIN to 15PIN SATA power cord

Note: As each batch of raw material may be different,the PCI-E riser card may be a little different on the appearance(such as the solid capacitor,USB 3.0 cable,the Chip model),but the function is the same.



Only the above package content, other products are not included.

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

• [PCI-E1X to 16X extension cable]: Brand new design, you can use 1X-16X, the circuit board PCIe cable is newly launched, safer, more efficient, and more practical!
• [Stable and safe]: The card power supply adopts 8 imported large solid capacitors to make the card power supply more stable and safe.
• [Reduce the burden on the motherboard]: The 6PIN interface of the card enhances the power supply, which is converted to a 6PIN line through the SATA port, making the power supply of the card independent of the motherboard, thereby reducing the burden on the motherboard when connecting multiple cards.
• [Sturdy data cable]: 60 cm USB 3.0 data cable, which can flexibly place PCI-E devices. The PCI-E uses multi-layer shielded cables and can be connected to 3Meter without signal attenuation.
• [Support System]: Compatible with all WINDOWS systems, LINUX,

Product description

Feature:

Type: PCEI64P-N03 008S

Wire length: 60cm/23.62"

Interface: PCI-E 1X PCI-E 16X USB3.0

Description:

1.Graphics card power supply using four FP solid capacitors. Anti-burn machine chip,make graphics work more stable.

2.Add LED indicator

3.Three interface power supply,compatible with all power supply port.

4.The separate adapter power supply, graphics power supply from the motherboard independent, thus reducing the burden on the motherboard when connected to multiple graphics cards.

5.Graphics slot using the connector, the graphics card to contact better.

6.PCI-E connector with multi-layer shielded wire, the longest 3m/9.84ft can be connected without attenuation signal.

7.Wire softer,graphics can be placed.

8.Slot with a fixed buckle, easy to remove the video card and fixed video card so that the video card will not fall off from the slot.1/6/12 x PCI-E 16X Aadapter

Package:1/6/12 x PCI-E 1X Riser Board

1/6/12 x USB 3.0 Cable (Cable Color is Random Sent)

• Graphics card power supply using four FP solid capacitors. Anti-burn machine chip,make graphics work more stable.
• Three interface power supply,compatible with all power supply port and add LED indicator.
• The separate adapter power supply, graphics power supply from the motherboard independent, thus reducing the burden on the motherboard when connected to multiple graphics cards.
• PCI-E connector with multi-layer shielded wire, the longest 3m/9.84ft can be connected without attenuation signal.
• Slot with a fixed buckle, easy to remove the video card and fixed video card so that the video card will not fall off from the slot.1/6/12 x PCI-E 16X Aadapter.