11 best raid controller with cables

Product description

Condition Note: Used



DELL PowerEdge 1950 SAS RAID Controller Adapter Card

P/N: WX072

With Cable

Cable P/N: TX846

• DELL PowerEdge 1950 SAS RAID Controller Adapter Card
• P/N: WX072
• With Cable
• Cable P/N: TX846

Product description

CableCreation Mini SAS 36 Pin cable is a high-speed data storage interface designed for high-throughput and fast data access. This patch cord supports data transmission of 4 channels of 12 Gbps



Fits for:

Mini SAS 36 pin port compatible with Raid Cards like Dell R710, Dell R720, Dell T610 server, H200 controller, PERC H700, H310, PE T710, NORCO RPC-4220 , Norco RPC-4224.



Model:

246M 0M246M.

• Fits for: Mini SAS 36 pin port compatible with Raid Cards like Dell R710, Dell R720, Dell T610 server, H200 controller, PERC H700, H310, PE T710, NORCO RPC-4220 , Norco RPC-4224.
• Model: M246M 0M246M.
• 90'-Angle-design can make for better cable management in situations.
• Direct replacement, fitment tested before shipping.
• Fast shipping: your order will be delivered from KY or CA warehouse within 2 to 6 days from purchase.

Product description

OIKWAN Focus to the Ideal Design of All of Our Quality Cables

OIKWAN is not Only a Brand But also a Creative Team With Own Factory manufacturing



Connect More with OIKWAN SAS Products



Critical Application Connector

OIKWAN Mini-SAS Cable with Side bands is an essential component of a hardware RAID configuration or a professional SAN network. The combination of a sturdy cable in a woven mesh sheath with individually shielded cables, cloth tape strain relief, and stainless steel latches provides a professional installation for critical applications.

Storage Expansion Tool with a Lifetime Warranty

Maximize the capacity of your RAID configuration or SAN network with this tough but flexible cable that is built to withstand 24/7 use. A lifetime warranty is included with this Mini-SAS cable for peace of mind when purchasing.



Important Note

Data transfer speed is determined by the capabilities of the connected hardware



Specifications

- Host/Controller Connector: 1 x 36 pin Mini-SAS SFF-8087 with latch

- Target/Backplane Connector: 1 x 36 pin Mini-SAS SFF-8087 with latch

- Supports SAS 3.0

- Length: 2.6 Feet

- Wire: 30 AWG

• {Mini SAS Multilane Data Cable} directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation. SFF-8087 36 Pin to SFF-8087 data cable is for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server
• {High Performance Internal Mini SAS Cable} Support SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays
• {Much Convenient of Internal SAS Data Cable } DIY or IT Professional installers are both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs; Mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces; Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane; Ideal component of a professional SAN network
• {Advantaged Design} Both side of SFF-8087 cable are include an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connection
• {What You Get } 1* 2.6ft/100cm MINI SAS 36P- MINI SAS 36P 6G Server Data Cable ,Lifetime warranty and 24*hours on line customer service

Product description

Features:



* Stable and reliant Silicon Chipset SIL3114

* PCI specification revision 2.3 compliant w/ 32-bit 33/66Mhz host interface

* Serial ATA specification revision 1.0 compliant

* Data transfer rate up to 150MB/s. (1.5Gbps)

* Connect up to 4 SATA drives

* Plug & Play connection

* Software application included

* Raid Function: Integrated SATA Transport, Link logic, and PHY layer

* Supports 4 Independent Serial ATA channels

* Supports RAID 0, 1, 5, 0+1, JBOD12

* Supports 256-byte transmit and receive FIFOs

* Supports programmable and EEPROM, FLASH & EPROM loadable PCI class mode

* Supports ATAPI devices: CD-ROM, DVD-ROM, etc

* 48-Bit sector addressing Virtual DMA



Package Included:



1 x 4-Port SATA PCI Expansion Card

2 x SATA Cable

1 x Software CD

• Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card ).
• Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length.
• The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports.
• You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set.
• SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ.

User questions & answers

Question:	Where's the manual
Answer:	My wife has a kindle fire with a USB-C port, and because the wifi in our home stinks has used it there. It's a good network adapter going from a wireline USB-C port in the bottom of the fire to a wireline Gigabit Ethernet port. Beyond that you're going beyond what it's built to do.
Question:	Is there a download link for the drivers? My optical isn't reading the disk
Answer:	I'll depend both on the hardware capabilities and the firmware. Might have to try it.
Question:	Has anyone tried this card, or any other pci sata controller with vmware esxi version
Answer:	I have a 2017 macbook pro 13". If the first one you get works it is just plug and play. Amazon was great about sending a replacement (that works fine)
Question:	Does this card support linux or freebsd? debian in particular if it is linux. thank you
Answer:	Yes

Product description

Package Includes:

• 1 x Mini SAS (SFF-8087) to x4 SATA Cable, 3.3 FT

Product Description:

• 1 x Mini SAS (SFF-8087) to x4 SATA Cable, 3.3 FT
• Connects your internal Mini-SAS Data Cable to a RAID or PCI Controller with an SFF-8087 port to 4 discrete SATA Drives.
• Mini-SAS Male (SFF-8087) 36Pin to 4 SATA 7Pin female cable multi-lane.
• Please note: this cable cannot work with SAS Driver.
• Data transfer rate up to 6Gbps per channel for fast data access.
• Provides steady internal connectivity between a serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector, allowing you to connect four SATA drives to an SAS controller.
• This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.
• Novice or pro installers can both benefit from the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
• Cable length - 3.3 ft
• Provides sufficient length for internal cable management.
• Unlike Parallel ATA, this cable has slim ribbons to minimize airflow impact in a computer case.
• Flexibly designed with acetate cloth tape over slim ribbon cables to protect from strain and rigidity.
• Woven mesh sheath covers half of the cable for easy routing.
• Easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.
• Organized with P1 to P4 labels for your clear and quick identification after installation.
• SFF-8087 compatible with popular RAID cars such as 3Ware 9650SE-8LPML RAID, Adaptec ASR-5805/512MB SAS RAID / 2258200-R 5405 RAID / 2258500-R 51645 RAID, Dell PERC H700 Raid / PERC H200, Dell PowerEdge 8-port SAS SATA Controller / PERC H310, HighPoint RocketRAID 2720 / RocketRAID 620 / RocketRAID 4520.

• STEADY CONNECTION: Connects your internal Mini-SAS Data Cable to a RAID or PCI Controller with an SFF-8087 port to 4 discrete SATA Drives. Please note: this cable cannot work with SAS Driver. Provides steady internal connectivity between a serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector, allowing you to connect four SATA drives to an SAS controller.
• FAST DATA ACCESS: Data transfer rate up to 6Gbps per channel. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.
• USER-FRIENDLY: Novice or pro installers can both benefit from the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs. With cable length of 3.3 ft, it provides sufficient length for internal cable management. Also organized with P1 to P4 labels for your clear and quick identification after installation.
• INTELLIGENT DESIGN: Unlike Parallel ATA, this cable has slim ribbons to minimize airflow impact in a computer case. Flexibly designed with acetate cloth tape over slim ribbon cables to protect from strain and rigidity. Woven mesh sheath covers half of the cable for easy routing. Easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.
• COMPATIBILITY: SFF-8087 compatible with popular RAID cars such as 3Ware 9650SE-8LPML RAID, Adaptec ASR-5805/512MB SAS RAID / 2258200-R 5405 RAID / 2258500-R 51645 RAID, Dell PERC H700 Raid / PERC H200, Dell PowerEdge 8-port SAS SATA Controller / PERC H310, HighPoint RocketRAID 2720 / RocketRAID 620 / RocketRAID 4520 / RocketRAID 4522, LSI Logic SAS9211-8I HBA Card, StarTech.com PCI Express RAID,  Syba 4-Port RAID HyperDuo / PCI Express SATA II 4 x Ports RAID

Product description

Brand Guarantee

CableCreation Focus to the Ideal Design of All of Our Quality Cables

CableCreation is not Only a Brand But Also a Creative Team With Own Factory manufacturing

CableCreation Offers All Buyers with Items Worry-Free Two Years Warranty and Lifetime Technology Support.

Specifications

Side 1: Right Angle Mini SAS 36Pin (SFF-8087) Male

Side 2: Mini SAS 36Pin (SFF-8087) Male

Cable Length: 0.75 Meter/2.5 Feet

Cable Color: Black

• [ High Speed Data Transfer] CableCreation Mini SAS 36 Pin cable is a high-speed data storage interface designed for high-throughput and fast data access. This patch cord supports data transmission of 4 channels of 12 Gbps
• [ SFF-8087 Port ]This SFF-8087 interface is mainly used on the mini SAS 4i array card as an internal SAS cable. mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a server or workstation.
• [ Wide Compatibility ] Mini SAS 36 pin port compatible with Raid Cards like Dell R710, Dell R720, Dell T610 server, H200 controller, PERC H700, H310, PE T710, NORCO RPC-4220 , Norco RPC-4224
• [ 90 Degree Design] Right Angle design can make for better cable management in some situations, especially in tight spaces.
• [ What You Get] You will get 2 x Mini SAS 36 Pin to 36 Pin cable, backed with 24 Months Warranty and lifetime technical service.

User questions & answers

Question:	Will the is work on a R710 H700 controller with 2.5" disks
Answer:	Yes. The R710 comes in many different configurations with 2.5 drive caddies or 3.5 drive caddies. You can use 2.5 drives in a 3.5 drive caddy with a 2.5 to 3.5 enclosure adapter. These adapters can be sourced easily on eBay or Amazon. These cables are long and they are long enough to go all the way from the rear of the case to the front right side of the case where the 2.5 drives are located.
Question:	Will these cables fit H700 on my R
Answer:	Unlike a couple of reviews I saw here, I want to confirm these cables DO indeed fit perfectly in the 1U R610 Server. The connectors that attach to the backplane are precisely the same height as the original cables and are the perfect length to reach my new H700 RAID in the embedded slot where the original PERC 6/i resided.
Question:	I have a dell r720xd with 12x lff (3.5 inch drives). which version of this cable should i buy - the right angle or left angle? should i 3 pk
Answer:	Dear Customer, You should choose the right angle version. If you purchase the 2-pack, you will get two cables. Any further question, please feel free to contact us. Thanks!
Question:	Could someone clarify the difference between right angle and left angle cables? Which server uses what angle cables? Thanks
Answer:	Just went through this with an R720xd. If you are moving to an LSI HBA card use either one right and one left or two lefts to get to either of the full height slots. If you use the two drive backplane on the rear remove the SASA1 jumper cable to it, then take the onboard SASA to the rear backplane directly (cable is long enough). Tuck SASB somewhere since you can't disconnect it. This gets you on board hardware RAID1 for the boot drives and a nice 24bay direct SAS enclosure for storage spaces.

Product description

011022 SFF-80872.5"3 Year3255066.6"60649260-8iLSI MegaRAID SATA+SAS controllers provide a new level of reliability, availability, and performance to businesses that are facing storage challenges driven by unprecedented data growth. With data transfer rates of up to 6Gb/s per port, the MegaRAID SAS 9260-8i and 9260DE-8i bring users new features and improved performance, while continuing to support all the features of the previous 3Gb/s SATA+SAS generation.LSI LogicLSI Logic CorpLSI00202Low-profileMegaRAIDMegaRAID 9260-8i 8-Port SAS RAID ControllerPCPCI Express x8Plug-in CardRoHSSAS ControllerYeshttp://www.lsilogic.com

User questions & answers

Question:	Can i insert this card in a pcie 4.0 x16 slot that runs in x4 mode (due to the motherboard configuration) and run it at the full supported speed
Answer:	First I booted up with the empty card. after windows installed it, I shut my computer down and pluged in my ssd drive. then started up in cmos, to see if it was their, it was. Every thing booted fine. So i ran a speed test and found that it ran 60% slower than my 1.5 onboard sata. Even though it showed as a 6g it does not have the speed. So i now use it for my cd rom. I there is some settings i missed, sure would like to know.
Question:	Does it come with bracket
Answer:	Sorry, the two slots are NOT standard USB slots. Although, they may look similar they are not. They are both eSATA ports, a kind of USB hybrid. Used to connect external drives. They are faster than USB or the older fire-wire. Look for an external hard drive that uses eSATA. For speed, eSATA is a huge jump over USB. It can be as fast as adding a hard drive straight into your computer.
Question:	Will this work on Linux
Answer:	Updating this answer for modern motherboard and more modern kernels. No, it is not plug-and-play. This card does not support AHCI specification 1.3.1, finalized in 2014, which means it will not work with most modern motherboards, or at least fully. WIth Linux, there is a sort of work-around though, you can set iommu=soft on the grub line (/etc/defaults/grub on Ubuntu and Debian-based). iommu=soft tells the kernel to ignore some of the ATA errors that result due to the failed AHCI commands. Still, if you want a fully working card in modern Linux and hardware, this is not it. Look at LSI.
Question:	Any cache on this card
Answer:	I contacted startech & they said it will work with up to 6 drives per port with multiport external bays. SO a a total of 12 drivers per card will work. They said they have tested & has been verified. I have 2 mediasonic non raid bays i will try to see if it works when i get the card

Product description

ELIATER PCIe 3.0 4x to 5 Port SATA III 6Gpbs PCI Express Expansion Card

This PCI Express expansion card provides a simple connection between a host computer and a SATA 3.0 device.

Feature:

Built-in JMB585 (PCIe Gen3x2 to SATA 6Gb / s x5) Controller: The data transmission speed of JMB585 reaches 1700MB / s. This is the maximum transfer rate for PCIe Gen3x2. This is the fastest data read / write transfer rate for multiple hard disk storage solutions in the field.

Note:

1.To install OS disk, make sure the main board supports PCIe boot function

2.Not support boot as System Disk

Package list:

PCIe 3.0 4x to 5-port SATA III expansion card x1

SATA cable x5

Full profile bracket x1

Low profile bracket x1

• Using a PCIe SATA card and 5 SATA cables, you can add 5 SATA 3.0 6Gbps / s devices to your computer.
• The 5-port SATA controller based on JMB585 main chip offers more stable and high performance, providing speed up to 1700 MB / s.
• Hot swappable, plug and play, no driver required, compatible with Windows 10/8/7 / Vista / XP, Mac OS 9/10 and Linux above.
• The PCIe to SATA III 5-port expansion card comes with a low profile bracket and 5 SATA cables to fit into PCIe X4 / X8 / X16 slots.
• [Note] -If your main board supports PCIe boot function, you can install OS on the disk connected to this PCIe SATA card. If your mainboard has RAID function, you can create RAID with this SATA card. WIN10 support software RAID 0/1.(Not support Boot as System Disk).

User questions & answers

Question:	Where can I find a manual for this device
Answer:	Yes, it is compatible with all routers with RJ45. Please rest assured to buy our Ethernet cable.
Question:	Can four sata hdds be connected simultaneously? or just 2 at a time
Answer:	Hello dear, YES it is backward compatible with Cat 7 Cat 6A Cat 6 Cat 5E Cat 5. CAT-8 Ethernet cable provides efficient protections in reducing EMI/RFI interference. You can enjoy stable speed performance if choose Cat8 than Cat6
Question:	This is the same card as the Electop that is based on the same chipset, and looks identical, right
Answer:	I have it. It really ended alot of buffering issues that I had. It won't slow down your speed in anyway. In fact, you will get the most out from your connection speed with it.
Question:	Is the 4 port card compatible with pci express x
Answer:	Hello Dear, It is really a Cat 8 cable, it transmits data at speeds up to 40Gps and bandwidth of up to 2000MHz. Our Cat 8 Network cables 100ft pass fluke professional cable analyzers tested. Please rest assured to buy our Ethernet cable. Flat cable is really a good choice for indoor & outdoor! It is sturdy and flexible, it’s hardy even folded or curled it into loops. Moreover, it’s thin and slim, so it is unnoticeable to hide in carpets, door seams and more! Flat design allows for a cleaner and safer installation, improving the look of your home or office. Rose.

Product description

The SI-PEX40137 8-Port PCI Express 2.0 SATA Controller Card adds 8 AHCI SATA III ports to a computer through a PCIe x4 or larger slot, delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs). The SI-PEX40137 uses two Marvell 9215 that can be used for embedded platform applications such as home NAS/media servers, DVR/NVR and set-top boxes, or vendors can develop their own software RAID boxes with FreeNAS. This PCIe SATA 6gbps card is backed by a 3-year sybausa.com warranty and free lifetime technical support.

• Using a ASM1806 PCIe bridge elimate the need for a Port Multiper when combining the Dual Marvell 9215 Chipset allowing to reach maximum bandwidth per port.
• Compliant with PCI-Ecpress Specification v2.0 and backwards compatible with PCI-E 1.x
• Supports Communication Speeds: 6.0 Gbps, 3.0 Gbps, 1.5 Gbps
• Support Native Command Queue (NCQ). Support Hot plug and Hot Swap.
• Supports AHCI 1.0 programming interface registers for the SATA controller

User questions & answers

Question:	Will this work with sas drives
Answer:	Very likely. I installed it in a 1U.
Question:	I have 2 x wd 10tb sas disk, can i use this pci on pc as data disk
Answer:	From the firmware of the card (Ctrl + C) at boot up, you can setup RAID 0, 1, 1E, 10. If you download the "MegaRAID storage manage", you can setup RAID 5. With Windows 8 and 10 you can setup RAID 5 using the built-in Disk Management of windows as well. I use this card with 6 x (3TB SAS 6Gbs HDDs) in a RAID 0 for gaming. For me this has been the best option as SSD for the amount of space I need is to costly. With Gaming you want to stay away from software RAID, as you want all your CPU clocks to work on your game.
Question:	Using Windows 10, can I use for a boot drive
Answer:	Hi, Yes you can. I believe you can backplane and backplane again.Hope this helps. I run 3 spindals, 2 solid state hybrids, and 2 solidstates. Have a good oneJim
Question:	Only half of my drives show up. one sas connector appears to be dead. is there a bios i can access
Answer:	The number of ports is the actual number of physical connections on the card. Each of the SAS SFF connectors has four SAS/SATA capable connections and you can buy a fan out cable that will allow you directly to connect 8 physical drives to the card - four drives on each of the two SAS ports. However, you can also get an interface known as an SAS expander. An expander will have one or two SAS input connectors and multiple SAS connectors for output. You can plug those into the card and control many more drives. For example, if you had one of these cards and two expanders which each had one input and four outputs, you could plug one expander into each of the SAS ports on the card and that would give you 8 SAS connectors and you could plug 4 drives into each SAS port on the expander using the same type of cable that would allow you to connect four drives directly to each port on the card. You can plug expanders into expanders too to support more and more drives. The quoted maximum number of drives just tells you how many physical SAS or SATA drives you can plug in if you have lots and lots of expanders.

Product features

Marvel 9215 SATA III Controller

Two Marvell 9215 that can be used for embedded platform applications such as home NAS/media servers, DVR/NVR and set-top boxes, or vendors can develop their own software RAID boxes with FreeNAS.

Asmedia ASM1806 PCI-e Bridge

Using a ASM1806 PCIe bridge elimate the need for a Port Multiper when combining the Dual Marvell 9215 Chipset allowing to reach maximum bandwidth per port.

Mini SAS to SATA Cables Included

Included with the 8 Port SATA III PCI-e Controller Card, a pair of Mini SAS to 4 SATA Cables is included.

Product description

The PEXSAT34RH 4-Port PCI Express 2.0 SATA Controller Card with HyperDuo adds 4 AHCI SATA III ports to a computer through a PCIe slot (x2), delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs). Featuring HyperDuo technology, the SATA card offers SSD auto-tiering which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives. By combining SSD and HDD drives into a single volume (up to 3 SSD + 1 HDD), HyperDuo discreetly works in the background to identify and move frequently accessed files to the faster SSD drive(s) for improved data throughput - up to 80% of SSD performance! (Note: The HyperDuo automatic storage tiering feature is compatible with computers that use a BIOS.) The PCIe SATA controller card supports Port Multiplier (PM), enabling multiple SATA drives to be connected to one port over a single cable, for a total of 7 drives (Up to 4 drives through PM on one port, and a single drive to the remaining 3 ports). Plus, the SATA controller card offers an effective hardware RAID solution, with native RAID (0, 1, 1+0) support. Throughput Benchmark Drive configuration Throughput Drive size 1 x HDD 112.81 MB/s 2 TB 1 x SSD 490.28 MB/S 120 GB 1 x HDD + 1 x SSD HyperDuo (Safe Mode) 489.28 MB/s 2 TB 1 x HDD + 2 x SSD HyperDuo (Safe Mode) 715.13 MB/s 2 TB Drives Used: SSD: OCZ Vertex 3 Series 2.5” 120 GB (VTX3-25SAT3-120G) HDD: Western Digital Caviar Green 3.5” 2 TB (WD20EARS) Software Used: IO Meter, 256KB Sequential Read, queue depth = 10 This PCIe SATA 6gbps card is backed by a 2-year StarTech.com warranty and free lifetime technical support.

• Add 4 Internal SATA III (6Gbps) Ports to a computer through a PCI Express x2 slot
• PCI Express 20 SATA Controller with HyperDuo SSD Tiering
• 4 Port PCI Express SATA III 6Gb
• PCI Express SATA RAID Card
• PCIe SATA 6G

User questions & answers

Question:	Can I hook my boot drive to this card
Answer:	No, it's SATA only
Question:	SATA ignoramus question. I assumed the two slots were standard USB. But I can't seem to wiggle any USB device plugs into the slots. Standard slots
Answer:	No, it's a SATA card
Question:	Does it work with ubuntu
Answer:	Yes. Since it is a non-Raid card, you may set it up as a boot drive.
Question:	Does this card support a multiport 5 bay enclosure (5 Bay Storebox eSata
Answer:	It could be the cable. Try swapping the cable from the working port to the failed one and see if that fixes the issue.

Product description

Features

Serial SATA 3.0, compatible with SATA 2.0 and SATA 1.0

PCI-Express V2.0, compatible with PCI-Express V1.0

Support speed of 6.0Gbps, 3.0Gbps, and 1.5Gbps

Compatible with SATA 6G, 3G and 1.5G Hard Drives

Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i

Support 4 SATA 3.0 6Gbps devices

Support IDE/AHCI 1.0 mode

Support Native Command Queue (NCQ)

Port Multiplier FIS-based and Command-based switching supported

Support Hot Plug and Hot Swap

PCI-Express X4, can be used on PCIe X4 X8 X16 slots

Support Windows XP/Vista/7/8/Sever 2008 R2/10(32/64 bit) and newer.

Support RAID Model: RAID0, RAID1, RAID10, and HyperDuo.



Package includes:

1 X PCIe X4 to 4 SATA 3.0 ports RAID host controller card

1 X Drivers CD

1 X Low profile Bracket

• PCIe 4X to 4 SATA III 6Gbps interfaces; transfer speeds up to 6Gbps; backwards compatible with SATA 1.0/2.0 of 1.5/3.0Gbps.
• PCI-Express V2.0 also compatible with PCI-Express V1.0, can be used on PCIe X4 X8 X16 slots.
• Port Multiplier FIS-based and Command-based switching supported; Chipset: Marvell.
• Support Native Command Queue (NCQ); Support IDE/AHCI 1.0 mode; Compatible with SATA 6G, 3G and 1.5G Hard Drives; Support Hot Plug and Hot Swap.
• Support RAID Model: RAID0, RAID1, RAID10, and HyperDuo. Support Windows XP/Vista/7/8/Sever 2008 R2/10(32/64 bit) and newer.

User questions & answers

Question:	I have 2 equal sized ssd's installed, can i setup raid1 without losing data from the original disk0. I stopped when it asked to create virtual disks
Answer:	Yes you can put this in a PCIe x16 slot. If it runs in x4 mode, then that is the max speed it will run at.
Question:	How is the performance in raid0 or raid10 for raid card sata iii 4 ports
Answer:	Not sure about other sellers. But ours comes with both full height and low profile brackets.
Question:	If there is data on the drive from windows, will I lose it when I hook the drive to card
Answer:	Yes
Question:	I see many controller cards do raid 0, raid 1, & raid 10. can this card do raid
Answer:	I believe it has a 512MB DDRII cache (800 MHz)

Product features

4 SATA 3.0 PORTS

Stable Solid Capacitors

LED Indicators

Marvell 88SE9230 4 ports SATA Ⅲ raid controller card