14 best taotronics wireless tvs

Product description

TX mode:

In the TX mode, the Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to RCA connectors and AUX connectors, therefore, please kindly have a check see whether your audio sources have one of these kinds of jacks. Please note that the adapter should be plugged into the “L&R AUDIO OUT” jack or the “AUX OUT” jack on the audio source but not the “Component IN” jack.

RX mode:

In the RX mode, the Bluetooth adapter could be used as a Bluetooth receiver to non-Bluetooth stereos such as wired headsets or wired speakers. Pair the Bluetooth receiver with your cell phone, and plug your headsets into the jack on this unit, then you will be able to hear the music from your phone.

NOTE：

If the TV does not have the “AUX OUT” jack or the “L&R AUDIO OUT” jack, a headphone jack should also work.

If the TV only have a “DIGITAL AUDIO OUTPUT (OPTICAL)” jack, a convertor is needed or you could choose another model of TaoTronics Bluetooth Transmitters, TT-BA09, which is supported to both aux audio output and optical audio output.

Not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc.)

What is In the Box:

1 x TaoTronics Bluetooth 5.0 2-in-1 Adapter (Model: TT-BA07)

1 x 3.5mm Audio Cable

1 x 3.5mm Female to 2 RCA Male Cable

1 x USB Charging Cable

1 x User Guide

• LOW DELAY: Low Latency for High-fidelity Stereo Sound, lag-free content streaming in transmitter mode. Low Latency supported Bluetooth headphones/speakers are required.
• MAKE IT TWO: Upgraded 2-in-1 Bluetooth V5.0 transmitter can be paired with two Bluetooth receivers (like headphones + speakers) simultaneously. Note: Low Latency does NOT support Dual Link mode.
• ALWAYS ON: TaoTronics Bluetooth 2-in-1 Adapter continuously streams even while charging. Built-in battery for up to 10 hours use - enjoy your favorite wireless content all the time.
• BLUETOOTH EVERYWHERE: In Transmitter mode, turn a non-Bluetooth TV, PC, CD player, iPod, MP3 / MP4 into Bluetooth transmitter. Receiver mode: Ideal for home or vehicle music streaming sound system.
• PURE SOUND: high definition codec for a richer and deeper sound experience. Listen to CD-like audio quality at no compromise. Plus, 12 + 18 month extended warranty and 24/7 friendly customer service

Product features

TaoTronics Bluetooth 5.0 Transmitter & Receiver

Unlock the full potential of your devices with TaoTronics Bluetooth 5.0 transmitter, adopting Low Latency technology to deliver high-fidelity stereo sound with no delay. Confidently & seamlessly stream music from your phone/tablet to wired headphone/speaker.

Bluetooth 5.0

Ensures stable transmission to Bluetooth devices from up to 10m/33ft.

Play While Charging

Safely charge the transmitter & stream music for long periods.

One Button Control

Easily switchbetween transmitter (TX) & receiver (RX) mode.

Product description

Color: Black

taotronics - enhance your life Enjoy life to the fullest with TaoTronics. From industry-leading LED lighting solutions to home goods and audio devices, we put users at the center of our decisions and design products that address life's needs and help you make the most of your daily activities.

user tips:

1. Please use an audio or RCA cable to connect to traditional tvs

2. For smart TVs, you can choose to connect via Bluetooth, audio cable, RCA cable, or optical connection. For optical connections, please change your TV audio output to PCM (PCM is a form of digital signal that is used to represent analogue data, and is an optional audio Format on many Televisions)

4. Please make sure the protective caps at the ends of the optical cable are removed before plugging it in

5. This sound bar is designed for mid-sized rooms 15 – 30 m² (160 – 320 ft²)

technical specifications:

what’s in the box:

1 x TaoTronics sound bar (model: TT-SK023)

1 x Remote Control

1 x Power cord

1 x optical Cable1 x 3. 5mm to RCA cable

2 x Wall Mount kits

1 x User guide

• Room-filling sound: powerful speakers deliver a round, high-end audio experience
• Multiple wireless and wired connections: easily connect to the sound bar via Bluetooth 4. 2 or standard audio cable Connection, RCA, and optical input
• 3 different equalizer modes: fine tune your sound bar with 3 distinct equalizer modes (games mode, music mode, movie mode) via the remote control to match your favorite sound
• Control your sound bar Remotely: handle your sound bar from the comfort of your couch or directly on the device; a repeat click of the power button switches through the functions, the LED screen will show the current function
• Slim to save space: slick 32-Inch design pleases the eye and slim Dimensions save valuable space
• For optical connections, please change your TV audio output to PCM(PCM is a form of digital signal that is used to represent analogue data, and is an optional audio Format on many Televisions)

User questions & answers

Question:	Can this be hooked up from digital audio out on tv to aux on the soundbar
Answer:	The JBL Bar2.1 is bluetooth compatible and the subwoofer will connect to the bar2.1soundbar wirelessly(bluetooth)
Question:	Can I control the sound with my tv or dish remote
Answer:	I have not. My sound bar is synched to the on/off button on my TV, and the sound is delayed about 5 seconds after I turn on the TV. But I have not experienced any other sound delays.
Question:	what is output wattage
Answer:	Usually when you shop on Amazon prices do change. Sometimes if you leave items in your cart a few days you will notice the price change. It can go higher or lower or stay the same it all depends on the demand at the time.
Question:	I only get static from the optical port. Am I doing something wrong
Answer:	Great question. The JBL 2.1 has 2 different modes. the first mode is 1. Auto standby This soundbar automatically switches to standby after 10 minutes of button inactivity and no audio/video play from a connected device. 2. Auto wake up The soundbar is powered on whenever a sound signal is received. This is most useful when connecting to the TV using the optical cable, as most HDMI™ ARC connections enable this feature by default. If you have any other questions feel free to reach out to JBL customer support at https://support.jbl.com/us/en/

Product description

TaoTronics - enhance your life Move forward, find your passion, and enhance your life with TaoTronics. We help people discover products that address life's needs and inspire you to enhance your life. From home goods to gym essentials and audio accessories, move life forward with products designed to match your grit and speed.

• Bluetooth 5. 0 wireless transmitter receiver: TX transmits audio from your TV/computer to your Bluetooth headphones/speakers; RX mode for receiving Audio from your cellphone to home Stereos
• Exceptional range: first class Bluetooth technology for complete freedom from cables and cords, The Audio transmitter can stream Audio wirelessly up to a range of 50m/164ft line-of-sight in open air
• Improved audio transmission: eliminate audio-visual lag with Low Latency codec support. Please note that the Audio receiver must support Low Latency codec
• Dual pairing: Supports dual device connection, Pair two Bluetooth headphones/speakers in TX mode at the same time to share the music with a loved one
• Bypass mode: the adapter can also be used as a converter to build a cable connection between devices with different jacks, such as an optical to aux audio converter, easily switch between wired Connection and Bluetooth without unplugging the cables
• Pristine high-res sound: HD codec preserves the quality of your music, high definition Bluetooth wireless Audio that’s indistinguishable from wired sound

User questions & answers

Question:	how to recharge
Answer:	Mine did not come with a wall charger so I just hooked to included cable to a free USB connector on the computer I am using it on. Works fine.
Question:	Anyone successfully hooked apple airpods to this device from a samsung smart tv using digital optical output
Answer:	Yes. Turn the Tao Tronic on, make sure its in OPT mode, and hit the bluetooth icon twice to put it in pairing mode. Then, put your airpods in their case and open the lid, and press down the reset button on the back of the case. You'll see the LED light go from green to blinking white. After 5-10 seconds mine connected fine. There is no volume control on the airpods and I was unable to use my TV remote's volume (the tv said it was not available) so it was at a constant volume. Good luck!
Question:	The manual that is included is printed on the head of a pin. Is there a pdf version available
Answer:	There's a link to a downloadable manual on the website. Here's the URL for it: https://cdn.shopify.com/s/files/1/0273/0351/0069/files/TT-BA014-User_Manual.pdf?3311
Question:	Can you leave this device plugged into the charger while you use it
Answer:	The sound quality is terrible if you use it while plugged in. Static noise that disappears when you unplug it from the charger. This is basically the only downside to the device. (Well, that, and the fact that there it doesn’t use a pairing passcode, so there is a chance that my neighbors could connect a device to it inadvertently.)

Product features

Wide Compatibility

1. This Bluetooth 5.0 Audio Adapter is backwards compatible to devices with older version of Bluetooth.

2. Supported to work with devices that have optical / AUX / RCA audio jacks.

3. In TX mode, the Bluetooth Adapter can be plugged into the audio output jack on TVs, computers, iPods and other non-Bluetotoh audio sources, and paired to Bluetooth headphones / speakers.

4. In RX mode, the Bluetooth Adapter can be paired to cellphones, iPads or other Bluetooth audio sources, and plugged into wired speakers headphones to stream audio from cellphones to the wired stereos.

5. In Bypass mode, the Audio Adapter can pass through optical/aux signal. Easily switch between wired connection and Bluetooth without unplugging the cables.

Product description

Upgraded Optronics Portable Bluetooth Transmitter Want to enjoy wireless audio reproduction but your TV PC iPod or older non-Bluetooth audio devices won’t support it? Simply add it!



The Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to RCA connectors and AUX connectors, therefore, please kindly have a check see whether your audio sources have one of these kinds of jacks. Please note that the adapter should be plugged into the “L&R AUDIO OUT” jack or the “AUX OUT” jack on the audio source but not the “Component IN” jack.



NOTE：

If the TV does not have the “AUX OUT” jack or the “L&R AUDIO OUT” jack, a headphone jack should also work.

If the TV only have a “DIGITAL AUDIO OUTPUT (OPTICAL)” jack, a convertor is needed or you could choose another model of TaoTronics Bluetooth Transmitters, TT-BA09, which is supported to both aux audio output and optical audio output.

Not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc.)



What is In the Box

1 x Optronics Wireless Bluetooth Transmitter

1 x USB Charging Cable

1 x 3 5mm Female to 2 RCA Male Cable

1 x User Guide

• Low Latency Bluetooth Transmitter Add Bluetooth functionality to non-Bluetooth Audio Sources such as TVs PCs iPods MP3 players Allows you to stream audio to Bluetooth headphones/speakers wirelessly
• Fast setup for immediate usage intuitive installation enables your Audio devices to communicate with your Bluetooth headphones and speakers sound bar or echo up to 33ft/10m
• Immersive entertainment without disturbing others benefit from Bluetooth Audio when exercising watching Late night TV shows or simply when you want to keep the entertainment for yourself only
• Broad Compatibility Impeccable Sound Quality Relies on A2DP Bluetooth profiles for a smooth operation and perfectly synced high-fidelity audio reproduction
• Small size with great battery life Compact yet durable wireless transmitter provides up to 8 hours of continuous audio playback or 140 hours on standby
• Included components: Quick Start Guide

User questions & answers

Question:	does this transmitter have to be plugged into a power source or is it portable, can it be used while jogging
Answer:	The transmitter is USB chargeable. The unit has limited range. I have mine plugged into a TV, and it transmits to a portable Sound Bar located in the house, or very close to the house.
Question:	can i connect the 305 mm plug into a sony mini disc player and then connect to my cars bluetooth
Answer:	I don't know where you got the 305 mm dimension from, but the transmitter's connector should fit the disc player's headphone jack. Your car's Bluetooth should be able to pair with the transmitter. You'll need to think about charging or powering the transmitter. You can use a 12V/5V car charger continuously to eliminate the hassle and interruption of re-charging. I don't know how the mini disc player is powered, but if it uses a car charger and you only have one accessory outlet available, I think you can find a splitter for this purpose.
Question:	What the heck is a mfb? is it the bluetooth headphones
Answer:	Make sure it is compatible with your headphones.
Question:	How much of a difference in terms of longevity does it make to charge it through the TV versus an outlet while in use
Answer:	It didn’t work in our car stereo so I sent it back

Product description

TX mode:

In the TX mode, the Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to RCA connectors and AUX connectors, therefore, please kindly have a check see whether your audio sources have one of these kinds of jacks. Please note that the adapter should be plugged into the “L&R AUDIO OUT” jack or the “AUX OUT” jack on the audio source but not the “Component IN” jack. 



RX mode:

In the RX mode, the Bluetooth adapter could be used as a Bluetooth receiver to non-Bluetooth stereos such as wired headsets or wired speakers. Pair the Bluetooth receiver with your cell phone and plug your headsets into the jack on this unit, then you will be able to hear the music from your phone. 



NOTE： 

If the TV does not have the “AUX OUT” jack or the “L&R AUDIO OUT” jack, a headphone jack should also work.

If the TV only have a “DIGITAL AUDIO OUTPUT (OPTICAL)” jack, a convertor is needed or you could choose another model of TaoTronics Bluetooth Transmitters, TT-BA09, which is supported to both aux audio output and optical audio output.

Not recommend for streaming live music (while playing guitar keyboard electronic drums etc ).



What’s in the box

1 x TaoTronics Bluetooth 5.0 2-in-1 adapter (Model TT-BA08) 

1 x 3.5mm audio cable 

1 x 3.5mm female to 2 RCA male cable 

1 x USB Charging cable 

1 x User guide

• Bluetooth transmitter and receiver: Transmitter function transforms 3.5mm audio-out media devices into a Bluetooth device capable of streaming Bluetooth audio; Receiver lets non-Bluetooth devices like car or home Stereos receive high quality audio.
• Instant sound: Enjoy a latency lower than 95% of other devices with Low Latency technology; end-to-end lag time is now 40 milliseconds so high-definition video is transmitted without problems in Transmitter mode.
• A 2 for 1 connection: Two Bluetooth headphones or speakers can pair at once so children can watch in silence and give parents a needed break. NOTE: Low Latency does not support dual pair mode.
• Full control: During receiver mode you have full control of the music including play/pausing track selection and volume control with buttons on the adapter controls. The adapter can connect to traditional device like wired headphones or speakers so they can receive Bluetooth music direct from phones and tablets. NOTE: Only RX mode allows for audio control with the volume +/- button.
• Always ready: With 20 hours of continuous audio, battery protection, charging during operation and pairing memory functionality you're always ready for fun.
• NOTE: In TX mode the unit should be plugged into the “L and R Audio out” jack or “aux out” jack or the headphone jack on the audio source device.

Product features

Easy To Set Up

Simply connect the transmitter to the audio output port of your TV, iPod, or other device via the 3.5mm audio cable or the RCA cable to receive sound.

Work While Charging

You’ll never need to turn off the adapter as you can use it while charging. Even better is that it will automatically re-pair every time you use it.

More Battery Life For More Fun

An extra-long battery life of 20 hours means you can enjoy music for almost the entire day before the next recharge.

No More Wires With Bluetooth

You can say goodbye to tangled wires with the Bluetooth 5.0 standard that gives a stable and reliable streaming connection.

Product description

Connect to TV via digital optical Audio out



1. Find the digital optical Audio out jack on your TV.



2. Connect the transmitter tt-ba09 to your TV via the digital optical Audio out jack using the digital optical cable.



3. Pair the transmitter tt-ba09 with your Bluetooth headphones/speakers. Connect to TV via aux/ RCA audio out once the transmitter is connected to Bluetooth stereos, the blue LED indicator will remain on. If there’s no sound coming out from your stereos, please kindly have a check see if you have plugged the unit into the audio output jack on your TV.



Pair with two Bluetooth headphones/speakers simultaneously



1. Turn on your speaker/headphones and the transmitter, place them into pairing mode (tap the power button twice to set the transmitter into pairing mode, LED flashes Blue and red). Making sure they pair with each other successfully.



2. Turn off the Bluetooth of the speaker/headphones and turn on speaker/headphones B. Then tap the power button twice of the transmitter to pair and connect to your speaker/headphones B. Also make sure they pair with each other successfully.



3. Turn on the Bluetooth of speaker/headphones a. In approximately 30 seconds, it will automatically connect in. And now the audio will be transmitted to both speakers/headphones.



Note



1. If the transmitter could not pair with the headphones/speakers successfully, please kindly reset both the transmitter and the headphones/speaker.



2. The transmitter is supported to Low Latency codec, Low Latency supported headphones/speakers are also required for the audio to be encoded via this codec.



What is in the box



1 x TaoTronics Bluetooth 5.0 2-in-1 adapter (Model: TT-BA09)



1 x 3ft digital optical slink cable/ 50cm audio cable



1 x 3.5mm 1. 64ft/ 50cm audio cable



1 x 3.5mm female to 2 RCA male Cable



1 x USB charging Cable 1 x user guide

• Transmitter + receiver: One portable adapter to use as either transmitter or receiver, powered by the latest Bluetooth 5.0, can pair with two headphones/speakers at once.
• Optical + 3.5mm: You get maximum flexibility with support for both 3.5mm (aux and RCA) and optical (to slink) digital, both input and output are supported.
• Low delay: Low Latency technology eliminate Bluetooth audio delay, so you can watch TV/movie/video and listen to high-clarity sound in perfect synchronization. NOTE: Low Latency only supports TX mode and works when receiver also supports this codec.
• Constant streaming and automatic re-pairing: Internal battery provides up to 15 hours of using, support charging and streaming at the same time, and automatically re-pairs with existing paired devices.
• Cable-free roaming: Keep your old stereo or wired headphones alive with new Bluetooth wireless connection, pair with smart phone or tablet from up to 30 feet away, and enjoy great music cable-free.

User questions & answers

Question:	My tv & speakers both doesnt have bluetooth.so i need to get 2 of these,one connected tv as transmitter and other connected to speakers as receiver
Answer:	There is a loud buzzing when trying to use during charging. This is from electrical interference from the plug. It could be possible to resolve this with a ground loop isolator but I haven't tried this myself. Those run $10-15 so could try it. It lasts a couple sessions of music listening for me and then I charge overnight.
Question:	Can it just be plugged in to the wall so that it's always charged/charging and won't need to be re-paired each time, or will that damage the battery
Answer:	No
Question:	can this device pass through optical signal..? It has a in and out port...? I just connected it in pass thru mode - no signal on the optical out
Answer:	Very compact 1.75- 2 inc by 2.25 -3 inc
Question:	Does the apx low latency support dual mode on these
Answer:	There is no rechargable battery.

Product features

Accurate Sound

Low-latency significantly reduce Bluetooth delay and allows synchronized audio and video for gaming and TV.

Stay On

Connect the adapter to a charger and leave it on. It will automatically resume connection with Bluetooth devices. (Transmitter Mode Only).

Bluetooth 5.0

Powered by the latest Bluetooth 5.0, and backwards compatible with Bluetooth v4.2, v4.1, v4.0, v3.0, and v2.1.

• Dual Mode Wireless Adapter: Use Transmitter or Receiver mode to add wireless connectivity to your wired devices and stream music wirelessly
• Seriously Accurate Sound: Bluetooth 5.0 and aptX Low Latency codec provides high fidelity lag-free audio as clear as the wireless source (Note: Only TX mode supports aptX Low Latency codec)
• Dual Link Music Streaming: Connect two phones to one wired speaker to switch music source or connect two wireless headphones to the same TV or laptop to share the music you love
• Constant Streaming: Rechargeable battery stores up to 24hrs of use from one charge, great for several days use; connect the wireless adapter to the power source to stream music while charging
• More Flexible Connection: 3.5mm audio jack and digital optical jack for audio input and output connects to a multitude of compatible devices like wired/wireless headphones, speaker, amplifier, TV, laptop, gaming console

User questions & answers

Question:	Does this auto turn-off or does it remain on when plugged into charger
Answer:	Of course
Question:	How can I turn the volume up/down with AirPods
Answer:	I was not pleased with this turntable,?nice looking but impossible to balance the arm weight . I returned it immediately.
Question:	Wondering if I can use this for my ceiling projector to connect to my sonos sound bar 15ft away? Would this work if I bought 2 of these units
Answer:	No.
Question:	What is the difference between tt-ba09pro and tt-ba
Answer:	No it does not stop. You must use the cueing lever to lift the tone arm. It is not an automatic turntable. It does play 78's though which is one reason I bought it. It does come with the insert to play 45's but it only plays one record at a time. It is belt driven also. Has a built-in pre-amp if needed. Can be by-passed with a switch.

Product features

Stream Music Wirelessly

An ideal solution to add Bluetooth connectivity to your existing technology. Effortless to set up, enjoy music when your phone has no headphone jack or you want to watch TV without disturbing others in the room.

Easy-To-See Panel

Simple to check the working status and see if the device is successfully connected via the indicators.

USB-C Fast Charging Port

Save precious time waiting for the wireless adapter to be fully charged – your device is ready to go in 2hrs.

Fast Pairing & Stable Connection

Bluetooth 5.0 makes it easier to establish a stable connection for perfectly synced sound for an enhanced movie watching experience.

Product description

25-Inch sound bar dual wired and wireless depending on your TV model and home theater setup, The TaoTronics wall mountable sound bar pairs via Bluetooth from up to 33 ft./ 10 M or connects with the in-unit 3. 5 mm, RCA, and optical inputs. Should you opt for a wired setup, The included optical cord provides a more pure, unaltered audio reproduction. multiple setups, multiple options no longer do you need to move your furniture around to further enrich your home theater setup. The TaoTronics Sound bar can be set Below the screen or conveniently mount onto the wall for a minimalist, sleek appearance. even the most advanced technology can be easy to operate with a fully functional, intuitive remote control. TaoTronics includes a high-sensitivity IR remote that displays the different modes by means of differently colored LED lights. what's in the box: 1 x TaoTronics sound bar (model: tt-sk017u)1 x Remote Control 1 x Power cord 1 x optical Cable1 x 3. 5mm to RCA cable 1 x User Manual

• 25" Sound bar: No need to have a spacious living room to enjoy better audio playback! This compact sound bar installs unobtrusively in bedrooms and small environments. (Note: Please use the adapter contained within the package)
• Dual wired and wireless: pair via Bluetooth from up to 33 ft./ 10 M or connect with the in-unit 3. 5 mm, RCA, and optical inputs
• Multiple Setups, multiple options: sits flat below the TV screen or securely mounts on the wall for a sleek, elegant home theater setup
• Easy to use and operate: high-sensitivity IR remote control displays the different modes by means of differently colored LED lights
• Optical connection for clearer sound: Plug in via the included optical cable for a more pure, unaltered Audio reproduction

User questions & answers

Question:	soundbar newb can't have wireless due to medical equipment does this broadcast bluetooth if you aren't trying to pair with anything
Answer:	Dear Customer, The soundbar will not impact on the medical equipment when the Bluetooth function is turned off.
Question:	How much watts this soundbar has
Answer:	Dear Customer, The output for this soundbar is 36W.
Question:	What are the dimensions
Answer:	Dear Customer, They are 650 x 88 x 60mm (25.5x3.5x2.4 inch).
Question:	If I connect this to my tv by optical cable, can I control the volume with the tv remote
Answer:	Dear customer, Sorry you could only use our remote using optical cable. If you use the 3.5mm to 3.5mm cable, it can control the volume with the TV remote.

Product description

T-Power - manufactured with Brand-new Input Voltage Range: AC 100V - 240V ( 18v Compatible )



Compatible with :



TaoTronics TT-SK017U Sound Bars for TV Sound bar Wired & Wireless Bluetooth 4.2 Speakers

TaoTronics 2.1 Channel TT-SK020 Soundbar for TV with Subwoofers Wireless Bluetooth 4.2 Speakers

Also fits: 19v BROOKSTONE - ON STAGE - MODEL BL569 POWERED IPOD SPEAKER DOCK , Fallon MU24-1180133-A1 MU24-1180133A1 MU241180133A1 ITE 18VDC



⚠️ ( Please Note ! that the "TaoTronics Speaker " available in a number of different Models Number , Please Make sure Your Model or P/N : Match this Listing , Thank you.

• T-Power - manufactured with Brand-new Input Voltage Range: AC 100V - 240V ( 18v Compatible )
• Compatible with : TaoTronics TT-SK017U Sound Bars for TV Sound bar Wired & Wireless Bluetooth 4.2 Speakers
• TaoTronics 2.1 Channel TT-SK020 Soundbar for TV with Subwoofers Wireless Bluetooth 4.2 Speakers
• Also fits: 19v BROOKSTONE - ON STAGE - MODEL BL569 POWERED IPOD SPEAKER DOCK , Fallon MU24-1180133-A1 MU24-1180133A1 MU241180133A1 ITE 18VDC
• ⚠️ ( Please Note ! that the "TaoTronics Speaker " available in a number of different Models Number , Please Make sure Your Model or P/N : Match this Listing , Thank you.

• This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. This product comes with a 6-month warranty guaranteed by SELLER.
• Dual Mode Wireless Adapter: Use Transmitter or Receiver mode to add wireless connectivity to your wired devices and stream music wirelessly
• Seriously Accurate Sound: Bluetooth 5.0 and aptX Low Latency codec provides high fidelity lag-free audio as clear as the wireless source (Note: Only TX mode supports aptX Low Latency codec)
• Dual Link Music Streaming: Connect two phones to one wired speaker to switch music source or connect two wireless headphones to the same TV or laptop to share the music you love
• More Flexible Connection: 3.5mm audio jack and digital optical jack for audio input and output connects to a multitude of compatible devices like wired/wireless headphones, speaker, amplifier, TV, laptop, gaming console

User questions & answers

Question:	Will this work with AirPod pro
Answer:	Anything that has bluetooth.

Product features

Stream Music Wirelessly

An ideal solution to add Bluetooth connectivity to your existing technology. Effortless to set up, enjoy music when your phone has no headphone jack or you want to watch TV without disturbing others in the room.

Easy-To-See Panel

Simple to check the working status and see if the device is successfully connected via the indicators.

USB-C Fast Charging Port

Save precious time waiting for the wireless adapter to be fully charged – your device is ready to go in 2hrs.

Fast Pairing & Stable Connection

Bluetooth 5.0 makes it easier to establish a stable connection for perfectly synced sound for an enhanced movie watching experience.

Product description

What is In The Box: 1 x TaoTronics 2-in-1 Bluetooth Transmitter and Receiver TT-BA12 1 x 3.5mm Audio Cable 1 x 3.5mm Female to RCA Male Cable 1 x USB Charging Cable 1 x User Guide Dual Bluetooth Transmitter & Receiver The TaoTronics Portable Bluetooth 4.2 Transmitter and Receiver TT-BA12 connects via 3.5mm or RCA and streams audio to your Bluetooth headphones or speakers in TX mode. Set it to RX mode to wirelessly receive audio from iphone smartphones, iPads or computer in car or home sound system. Hands-Free Calling while Driving Connecting the TaoTronics 2-in-1 Bluetooth Adapter with Microphone in RX mode will allow it to communicate directly with your smartphone. Answer or hang up incoming calls via the multifunction button and talk with the integrated mic. Wider Range for Spacious Environments Feeling 32ft / 10m of working range is not enough? Rejoice yourself with the broader connectivity field of the TaoTronics Bluetooth Adapter and stream audio to or from your Bluetooth devices from up to 65ft / 20m. Artfully Synchronized Audio with aptX-LL Lip-sync delay is the archenemy of all Bluetooth adapters. But fret not! TaoTronics has equipped the Bluetooth 4.2 Transmitter with an aptX Low Latency audio codec for a real-time sound transmission when playing games or watching movies in TX mode. Connects to 2 Devices Unlike those Bluetooth adapters that can communicate with just one device at a time, the TaoTronics Portable Wireless Adapter can transmit to up to two Bluetooth headphones, speakers, or soundbars simultaneously. Turn it on and it will automatically reconnect to the last two paired devices.

• 2-in-1 Bluetooth Transmitter and Receiver: Connects via 3.5mm or RCA and streams audio to your Bluetooth headphones or speakers in TX mode; receives audio from smartphones, computers, or iPads and tablets when set in RX mode.
• Artfully Synchronized Audio with aptX-LL: Low Latency technology reduces delay, resulting in a real-time audio transmission when playing games or watching movies (Note: aptX-LL available in TX mode only)
• Wider Range for Spacious Environments: Wireless Adapter transmits audio to your Bluetooth devices from up to 65ft / 20m for unconfined wireless freedom – double the distance as similar devices.
• Built-in Microphone, Hands-Free Calling while Driving: Answer or hang up incoming calls even when behind the wheel with the multifunction button and mic in RX mode.
• Connects to 2 Devices: Share the fun by transmitting audio to two Bluetooth headphones or speakers simultaneously; reconnects automatically to the last two paired devices.

User questions & answers

Question:	If I used a stereo splitter from the source, could I attached 1 of these to each channel and transmit at the speed to the right and left speakers
Answer:	Yes. Mine stays plugged into the charger.
Question:	Does the taotronics 65 foot bluetooth connector fit into the audio port on a macbook pro
Answer:	The silver color is the one with silver sides.
Question:	I want to connect my wireless earbuds to my computer. My computer does not have bluetooth capability. Will this work
Answer:	No, the TT-BR05 is a receiver. You can only connect TT-BR05 to audio input of non-Bluetooth earphones or speakers etc.
Question:	Will the tt-ba12 work while charging (plugged into usb charging cable
Answer:	It comes with a charging cable but not with the charging plug.

Product description

54

• Upgraded active noise cancelling (ANC) technology improved hybrid active noise cancellation significantly reduces low-frequency sound by up to 96% Enjoy the music no matter if you're on a bus train or plane
• Enjoy an impressive 2 hours of music and plug in for only 5 minutes with a USB connector completely recharges in just 45 minutes for 30 hours of music playback Note the headphones lose power with the ANC on even if the headphones are turned off Therefore Please don't forget to turn off the ANC button when turning off the headphones
• Customizable comfort super soft protein cushions adjustable headband 90° rotation axis for comfy all day wear safe storage & transportation with the carry case
• Pure audio power & hassle-free clear calls dual large-aperture 40 mm drivers deliver deep and powerful bass for an all-round impressive HD sound quality built in CVC 6 0 noise cancelling microphone for clear hands-free calls
• Hear & be heard built in CVC 6 0 noise cancelling microphone for clear hands-free calls Bluetooth for excellent wireless sound
• Included Components: 1 X Taotronics Anc Bluetooth Headphones (Model: Tt-Bh046) 1 X Carrying Case 1 X 3.5Mm Aux Cable 1 X Usb Charging Cable 1 X User Guide 1 X Airplane Adapter

User questions & answers

Question:	Do these work with Iphone
Answer:	No,if you would like to use it with PS4, you need an adapter.
Question:	Is this the soundsurge 46 2020 version with bluetooth 5.0 and usb c
Answer:	I honestly don't know, there is a jack to plug it into your phone or tablet if you don't want to use the Bluetooth for some reason. I don't know if you could plug into that jack or not.
Question:	Can I connect the microphone with my ps4 controller
Answer:	NO mute facility
Question:	What devices is the bluetooth able to connect with? i have a samsung galaxy phone and an hp laptop
Answer:	Yes

Product features

Custom Comfort

The over-ear cushioned ear cups are fully adjustable for comfortable all-day listening

Enjoy Rich, Full Frequency Response

Dual 40 mm drivers deliver full, balanced sound for phenomenal audio reproduction at 20Hz-20KHz

Fast Charge

A quick 5 min charge provides 2hrs of playback, up to 30hrs of battery life on a single charge

Product description

TaoTronics - enhance your life

enjoy life to the fullest with TaoTronics. From industry-leading LED lighting solutions to home goods and audio devices, we put users at the center of our decisions and design products that address life's needs and help you make the most of your daily activities.

technical specifications:rgb light mode: flow, pulse and sync

timer Duration: 1.5Hrs

frequency range: 60hz-20khz

dimension: 42 x 7 x 7.5cm/ 16.5 x 2.8 x 3in

weigh: 928G/ 32.7Oz



what’s in the box:

1 x TaoTronics PC sound bar (model: TT- SK027)

1 x Power adapters x 3. 5mm aux cable

1 x User guide

• Powerful stereo sound: TaoTronics PC sound bar packs Audio prowess with finely tuned dual 7W drivers to bring sound to life for a fantastically dynamic Audio experience
• Vibrant RGB lights: colorful RGB lighting elevates gaming performance, Easily turn on/off the light or change the color mode with the button on the top
• Effortless connectivity: wireless Connection to Bluetooth-enabled devices via Bluetooth 5.0 & wired Connection to other devices via the 3.5 mm aux cord
• Mini size: remarkably compact computer speaker is slim enough to sit flat below monitors to save space & keep your desk clutter free
• Uniquely versatile: built-in timer lets you record gaming sessions, Plug in your wired headphones via the 3.5mm aux port to game at night without disturbing others

User questions & answers

Question:	Anybody else’s speaker get really hot? After running it for 3 hours, the top part (by buttons), is really hot. I have it mounted on the wall
Answer:	I used 2 AAA
Question:	Can this tell time
Answer:	Try to recalibrate the scale 1. Place scale on hard flat surface. 2. step on the scale with one foot until the display lights up, then step off 3. The will show "0.0" indicating that the calibration was successful. Hope that helps.
Question:	Anyway to turn off the display
Answer:	I just purchased this sleek looking scale but there are no directions, or manual, to show how to turn the scale on. Can I get a manual on-line?
Question:	Will this work with xbox
Answer:	Definitely worth the price, Been using it for roughly 3 months since August 2019 and the scale has worked for what it's intended. Some words of advice is to make sure your router and scale are within close proximity to each other so they connect properly; I also recommend visiting their support (https://help.fitbit.com/) forum for instructions.

Product description

Technical Specifications: Bluetooth Version: 5.0 Bluetooth Protocols: A2DP/AVRCP/HFP/HSP Audio Codec: SBC Rated Power: 5W x 2 Frequency: F0-20KHz Stereo Separation: ≥45dB Distortion Factor: ≤0.5% Signal to Noise Ratio: ≥70dB What’s in the Box: 1 x TaoTronics PC Soundbar (Model: TT-SK028) 1 x 3.5mm Audio Cable 1 x User Guide

• Deluxe Audio: 6 drivers cover a full range of frequencies for stereo sound with boosted bass, you won’t miss any of the action from in-game footprints or movie dialogue
• Flexible Dual Connectivity: Choose your audio source conveniently by freely switching between AUX mode and Bluetooth mode when it’s connected to a laptop via audio cable and a phone via Bluetooth
• Wireless Music: Adopts Bluetooth 5.0 chip that provides transmission range up to 50 feet for you to wirelessly enjoy every detail in your movies and high-fidelity music
• One Button Operation: Control all functions from the knob including smooth volume adjustment, pair your Bluetooth devices, pause/play music, and answer hands-free calls under Bluetooth mode
• Plug In & Leave It: Connect your soundbar to your laptop via the USB charging cord and it will automatically power on when your laptop starts up – no need to turn on the soundbar every time you want to use it

User questions & answers

Question:	Can it be connected to computer (aux) and phone (bluetooth) at the same time? how does it determine which sound it plays
Answer:	I can't even get mine to swap connections by unplugging the aux cord. This will function only as either or, not both nor even easily swappable between both. Thankfully mine is only used as computer speaker as I can't connect anything to it through bluetooth without power cycling the whole thing (which takes pulling my PC out of the desk to get to the back of it to unplug USB power.
Question:	How long is the included 3.5mm aux cable
Answer:	1m
Question:	Thinking of using with desktop computer. No bluetooth. Does sound come through usb, or 3.5mm connection
Answer:	3.5mm audio cable. And the USB is used to power the speaker
Question:	Can the LED light around the knob be turned off
Answer:	Nope it can’t...