13 best sounding capacitors

LATTECH 4700uF 50V 22X30 +/-20% -40-+105℃ 6 PCS Aluminum Electrolytic Capacitors

LATTECH

Based on 19 reviews Check latest price

Product description

1.Rated working voltage 50V DC at operation temperature range -40 to +105°C. 2.This series is for communication equipments,switching power supply,industrial measuring,automotive electric products,etc

  • Capacitance:4700uF
  • Voltage: 50V
  • Temperature: -40-+105°C
  • Tolerance:+/-20%(120MHZ,+20°C)
  • Size: 22X30mm

User questions & answers

Question: About how big are these
Answer: Mine came out to 22x30mm which matches the title. The person saying they are 3/8" are wrong. Mine are 7/8in wide by over 1".

CDE Sprague Orange Drop Capacitors Tone Caps Polypropylene .01uF 715P 103J 200V for Guitar or Bass (Set of 2)

Based on 37 reviews Check latest price
  • Orange Drop Cap 715 and 716 Series are ideal for guitar & Hi-Fi amps
  • 715P 103J 200V .01uF, 5% tolerance. Cylinder/oval body shape, diameter 6.6mm, length 15mm. Measure your guitar cavity before buy
  • Hockey crimp radial leads. Polypropylene film and extended foil made, very low dissipation factor, low dielectric absorption and exhibits excellent capacitance stability
  • SBE sold the Orange Drop line to CDE at the end of 2012, and transferred all manufacturing of the line to CDE by 2013. So SBE and CDE are same in Orange Drop Cap
  • Package includes: 2 pieces Capacitors

CEILING FAN CAPACITOR CBB61 5uf+5uf 4 WIRE

Based on 58 reviews Check latest price

Product description

NEWTECH 5uf+5uf 4 WIRE

5 Pack .022uf 400v Axial Film Guitar Tone Capacitors

Based on 53 reviews Check latest price

Product description

5 Pack of .022uf 400v Axial Guitar Tone Capacitors

  • Similar in construction to Legendary 150M Guitar Tone Upgrade Capacitors
  • Axial Leads
  • Perfect for Humbuckers or Single Coils
  • Great cap for most applications.
  • Well suited for faster styles where a fast pick dynamic is desirable

User questions & answers

Question: What kind are these! Paper in oil
Answer: No. They are metalized polyester ( mylar). Thanks for asking.
Question: How long are these? No size if given
Answer: They are sized for use as tone capacitors and fit nicely between the pots on most setups. The cap body is 1/2 inch in length with 1 inch of lead on each side. The diameter of the body is 3/16ths of an inch. Thanks for asking.

2x (Pair) .033uf/200v Russian K40Y-9 Paper In Oil Capacitors - NEW OLD STOCK

Unknown

Based on 41 reviews Check latest price

Product description

One pair of New Old Stock Russian Paper In Oil Capacitors. .033uf @ 200v. Try with P-90's, or in the bridge position of a guitar with humbucker pickups.

Planet Audio PC10F 10 Farad Car Capacitor For Energy Storage To Enhance Bass Demand From Audio System

Planet Audio

Based on 1 reviews Check latest price

Product description

  • 3 Digit Bright Blue Digital LED Voltage Display, Blue Illuminated Window
  • Audible Warning Tone for Reverse Polarity, Voltage Overload and Low Battery Voltage
  • Voltage Measurement Accurate to + / - 0.1 VDC
  • Capacitance: 10,000,000, Working Voltage: 16 VDC, Surge Voltage: 24 VDC
  • Equivalent Series Resistance: 0.015 Ohm @ 100 Hz / 25°C, Capacitance Tolerance: + / - 10%
  • Dimensions: 9.5 x 6.4 x 2.5, Unit Weight: 5 Lbs
  • 1 Year Warranty

User questions & answers

Question: My equipment uses 19v dc. could i use 19v dc power supply with this supercapacitor
Answer: I would opt for matching voltages to insure component will degrade at a similar pace
Question: Will This Capacitor stay on even when the vehicle is off
Answer: No. The capacitor gets its power from the battery. If I'm not mistaken
Question: Can this capacitor be used to do spot welding after careful charging
Answer: Ignore the "spot in the morgue". Yes, it can deliver a crazy amount of power @ 14.4V (nominal), but at 14.4V, the current has a very high resistance to flow through your body, and you'd likely not feel it unless you're sweaty and haven't bathed in a few days. Aside from that, these aren't designed for short-circuit use, so your mileage may vary. It might work great for a few welds and pop. It might work great for thousands of welds. Who knows? If you try it, do let me know, I could use a spot welder.
Question: how many watts can this handle
Answer: Im not too sure but i have 3000 watts on my own and it can take more so i don't know exactly how much it can handle

2 x .047uf 100v ORANGE DROP Guitar Tone Capacitors Small Size 716P Polypropylene

Based on 19 reviews Check latest price

Product description

1 Pair Sprague .047uf 100v 716P ORANGE DROP Capacitors Small Size 5% Tolerance Polypropylene

Great cap for most applications, Great for tight control cavities.

Well suited for faster styles where a fast pick dynamic is desirable Great for Blues too!

Rated at 5% tolerance

Perfect for Humbuckers and Single Coils as well. Choice

Capacitors for all applications. Crisp sound with clean harmonic content.

  • Guitar Tone Upgrade Capacitors
  • 5% Tolerance Polypropylene
  • Perfect for Humbuckers or Single Coils
  • Retail Packaged

4 pcs Nichicon KZ Muse Capacitors 100V 22uf Premium Audio Grade

Nichicon

Based on 3 reviews Check latest price

Product description

4 pcs Aluminum Electrolytic Capacitors Leaded 22uF 100V 20%

Premium Audio grade capacitor higher grade than FG series

Ideally suited for first class audio equipment where qualitative and quantitative comfortableness is required

10 x 16mm Lead spacing 5mm

Leakage current is 0.01CV or less

  • Nichicon KZ MUSE Series
  • Premium Audio grade higher grade than FG series
  • Ideally suited for first class audio equipment
  • 100% Authentic Nichicon made
  • 10 x 16mm Lead spacing 5mm

2 NOS USA Sprague .047uf 100v 225P Orange Drop Guitar Tone Capacitors Circle 2

Based on 150 reviews Check latest price

Product description

2 - NEW OLD STOCK Genuine Old School Sprague Circle 2 225P ORANGE DROP Capacitors

.047uf 100V

Great cap for most applications.

Well suited for faster styles where a fast pick dynamic is desirable.

Great for Blues too!

MADE IN THE USA

. 225P Film / Foil type capacitors are rated at 10% tolerance.

Perfect for Humbuckers and Single Coils as well.

  • Pair of Premium Vintage Guitar Tone Upgrade Capacitors
  • Retail Packaged
  • New Old Stock 225P Orange Drop Tone Capacitors
  • MADE IN THE USA
  • Sprague Circle 2 Logo .047uf 100v

User questions & answers

Question: Are these polarized or non polarized? And is there a particular direction it should be connect? Thanks
Answer: According to the manufacturer, Orange Drop capacitors are non polar and can be installed in either direction. There are some people that believe that connecting what is known as the "outside foil" lead of the capacitor on the ground side of the circuit will produce a quieter circuit, and a Google search will reveal details discussions of why they believe this, but that discussion is far too lengthy to go into here.

2 x .022uf 250v 5% CDE Mallory 150M Guitar Tone Capacitors

Based on 57 reviews Check latest price

Product description

1 Pair CDE .022uf 250v CDE Mallory 150M Capacitors

5% Tolerance .

Great cap for most applications.

Well suited for faster styles where a fast pick dynamic is desirable

Great for Blues too!

Rated at 5% tolerance We sell our caps in Matched Pairs Tested to 5% Tolerance of stated value and of each other

Perfect for Humbuckers and Single Coils as well.

Choice Capacitors for all applications.

Crisp sound with clean harmonic content.

  • Legendary 150M Guitar Tone Upgrade Capacitors
  • 5% Tolerance
  • Perfect for Humbuckers or Single Coils
  • 5/8" length x 3/16" diameter, with 1-5/8" leads on each side.
  • Retail Packaged

User questions & answers

Question: Do these capacitors have polariry
Answer: Mallory 150 capacitors are non polar, and can install in either direction. The manufacturing process is random, so the outside foil end orientation in relation to the lettering is also random. For information on finding the outside foil end for the quietest operation, see YouTube or Google where there are numerous good tutorials on the subject. Thanks for asking.
Question: Are these the correct value for a 5f1 amp circuit
Answer: Tube amp circuits produce lethal voltages and can cause injury or death. In building or working on tube amplifiers, you should be fully aware of the values of components required without relying on advice from the web, as well as what the implications of using incorrect values or voltage ratings are. We cannot give that type of advice regarding the application of any particular component, especially if no specifics are given as to what part of the circuit they are used in (and we still couldn't give that type of advice with the specifics). Be careful out there! Thanks for asking.

Basic Wiring Harness Kit For P Bass US Spec Alpha Pots .047uf 716p Orange Drop

Based on 57 reviews Check latest price

Product description

Value Priced Wiring Kit for Precision Bass with US Spec Parts and Orange Drop 716P Capacitor

Super Quality

Includes: 2 Alpha US Spec Solid Shaft 250k Audio Taper Pots 3/8" x 32tpi 1/4" solid shaft with 1/4 inch bushing length

.047uf Orange Drop 716P Capacitor

1 Foot each Black and White Gavitt Cloth Covered Wire

Switchcraft #11 Output Jack

Ground Lug

Wiring Diagram Included

  • Great quality without spending a fortune
  • US Spec Parts and .047uf 716P Orange Drop Capacitor
  • Alpha US Spec 250KA 1/4 inch Solid Shaft Pots (Fender uses 250kA pots for both volume and tone)
  • Switchcraft Jack
  • Wiring instructions included

User questions & answers

Question: I have a passive bass, with a single coil only. Can this circuit be installed for a Single coil bass
Answer: This can be installed on any Bass that requires US spec 250k pots. Thanks for asking.
Question: Just looking at a set before installing them, they both seem to be no load pots. Will this be okay for volume and tone
Answer: Yes. They ARE for volume and tone. That said, they are 250k pots which roll off the highs a bit. I use 500k pots for most of my guitars because I can adjust the highs at the amplifier. I bought this kit for the wire, capacitor and used the pot for a passive tone control before and active circuit on my bass.
Question: What bass knobs are compatible with these pods
Answer: The pots have US Spec 1/4 inch Solid Shafts, so they are compatible with US Spec 1/4 inch set screw knobs such as Fender American P Bass / Tele knobs or equivalent. Thanks for asking
Question: Do you have a kit for rear routed bass? Shaft height wise
Answer: No, sorry.

10 Pack .01uf 200v Soviet Military Paper In Oil Guitar Tone Upgrade Capacitors K40Y

Based on 7 reviews Check latest price

Product description

10 Pack New Old Stock .01uf 200v K40Y-9 Soviet Military Spec Paper In Oil Capacitors.

MADE IN THE USSR.

Superb choice for a vintage sounding Les Paul Neck Pickup, Strat or Tele upgrade cap.

Approximately 3/4 inch long and approximately 1/4 inch in diameter. The leads are approximately 1 inch per side.

  • Great quality without spending a fortune
  • Made In USSR
  • 10 Pack .01uf 200v Soviet Paper In Oil Guitar Tone Capacitors - Retail Packaged
  • Approximately 3/4 inch long and approximately 1/4 inch in diameter. The leads are approximately 1 inch per side.
  • Great for Les Paul Neck Woman Tone

User questions & answers

Question: How big are they? length and width
Answer: They are about 1 inches long not including the leads which are about 1 1/4 long. The width of the capacitor body is about 1/4 inch. I used the ones I bought as bypass capacitors in a set of infinity RSb speakers.
Question: How are these used in various mods
Answer: These can be used as a stand alone tone capacitor, particularly to "open up" a dark sounding neck pickup. They also work well in parallel with an existing tone cap to raise the value by .01uf (adding in parallel to an .022uf cap will give a value of .032uf) and add a different dimension to the existing tone control. Essentially, they can be used the same way any .01uf cap is used, including several variations of cocked wah mods. A good Google search will lead you there, as there are too many possibilities to list here. Thanks for asking

HyperX QuadCast - USB Condenser Gaming Microphone, for PC, PS4 and Mac, Anti-Vibration Shock Mount, Four Polar Patterns, Pop Filter, Gain Control, Podcasts, Twitch, YouTube, Discord, Red LED - Black

HyperX

Based on 7 reviews Check latest price

Product description

The HyperX Quad Cast is the ideal all-inclusive standalone microphone for streamers, podcasters and gamers that are looking for a condenser mic with impressive quality sound. The Quad Cast includes its own anti-vibration shock mount to help reduce the sound of any movements. It has a built-in pop filter that reduces any muffles or popping noises for clearer voice quality. Instantly know your mic status with the LED indicator and with the tap-to-mute to easily mute yourself without any delay. Choose between the four polar patterns (Cardioid, Bidirectional, Omnidirectional and Stereo) to fit your streaming needs and adjust the sensitivity by using the gain control knob. Includes a mount adapter that fits both 3/8” and 5/8” thread sizes and is compatible with most microphone stands. Quad Cast is certified by Discord and TeamSpeak to ensure that the Quad Cast is the perfect microphone for broadcasting loud and clear for all your followers and listeners. Whether you’re plugging into a PC, PS4, or Mac, you’ll be able to deliver quality sound to anyone tuning in.

Features:

Microphone:

Power consumption: 5V 125 mA

Sample/bit rate: 48Hz/16-bit

Element: Electret condenser microphone

Condenser type: Three 14mm condensers

Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional

Frequency response: 20Hz – 20kHz

Sensitivity: -36dB (1V/Pa at 1kHz)

Cable length: 3m

Weight:

Microphone: 254g

Shock mount and stand 364g

Total with USB Cable: 710g

Headphone Output:

Impedance: 32 Ohms

Frequency Response: 20Hz – 20kHz

Maximum Power Output: 7mW

THD: < 0.05% (1kHz/0dBFS)

SNR: > 90dB (1kHZ, RL = infinity)

Compatible with: PC Windows 10, 8.1, 8, 7, PS4, Mac, Skype, Mumble, Open Broadcaster Software, and XSplit

Certified by: Discord and TeamSpeak

.

  • Anti-vibration shock mount
  • Tap to mute sensor with LED indicator
  • Four selectable polar patterns
  • Mount adapter included
  • Convenient gain control adjustment
  • Multi device and chat program compatibility

User questions & answers

Question: Does both game volume and mic output go through the 3.5mm into my headphones
Answer: The 3.5mm on the mic is just to test how you sound, i’ve never tested it in game. It’s a solid mic with great quality and it’s worth the money
Question: can i use my a40s with a mix amp with this mic
Answer: The mic uses a USB 3.0 to a micro USB (mini B). Your mix amp needs to have a USB port. And if it does you might need a adapter to make it fit. Which is a separate purchase. It'll work, just not out the box.
Question: Is this micro usb to usb 3.0 or usb
Answer: 3.0
Question: Any plans for an xlr version? or can you use multiple of these at the same time and have individual tracks
Answer: No it is aimed towards gamers and streamers not professional use so it will just be usb

Product features

Mic mount adapter included

Versatile adapter fits 3/8 inch and 5/8 inch threaded setups, so it can be mounted onto most mic stands or boom arms.

Convenient gain control

Easily adjust your mic sensitivity by turning the dial at the bottom of the QuadCast.

Built-in anti-vibration shock mount

Isolate the mic and suppress the sound of unintentional rumbles and bumps with the elastic rope suspension.

Tap-to-mute sensor with LED status indicator

Use the convenient tap-to-mute functionality to prevent an audio accident along with the help of the LED status indicator. If the light is on, the mic is active, if the light is off, the mic is muted

Four selectable polar patterns

Choose between four polar patterns (stereo, omnidirectional, cardioid, bidirectional) to optimize your broadcast setup and keep the focus on the sounds you want to be heard.

HyperX Wrist Rest

Featuring cool gel memory foam, anti-slip natural rubber underside, and anti-fray stitching to keep it supportive and comfortable for your wrists game after game.

HyperX Orbit S

Launch into another dimension of high-quality audio immersion with Audeze planar magnetic drivers and Waves Nx 3D audio technology.

Complete your gaming setup

with these complementary HyperX products

HyperX Alloy Elite 2

The keyboard for gamers, streamers, and multi-taskers who need more control at their fingertips. Features pre-installed HyperX Pudding keycaps, dedicated media controls, and customizable RGB lighting.

FURY Ultra - RGB Gaming Mouse Pad

Boost your style with 360° of smooth customizable RGB lighting. The hard surface features a low-friction, micro-textured surface without raised edges so you’ll get fast, fluid mouse movement.

HyperX Pulsefire Surge

Features a dynamic and customizable 360 degree RGB light ring, a Pixart 3389 sensor for DPI settings as high 16,000 DPI, and crisp, responsive Omron switches.

Latest Reviews

View all