13 best metra car amplifiers
Metra car amplifiers are audio amplifiers designed specifically for use in vehicles to enhance the audio quality and power output of car audio systems. These amplifiers are a part of the broader category of car audio and electronics products. Here's what you should know about Metra car amplifiers:
Amplification Power: Metra car amplifiers come in various power ratings, ranging from lower-wattage models suitable for powering car speakers to high-wattage models intended for driving subwoofers and other high-performance audio components. The choice of amplifier power depends on your specific audio system requirements.
Class of Amplifiers: Metra offers both Class AB and Class D amplifiers. Class AB amplifiers are known for their high-quality sound reproduction and are often used for full-range speakers. Class D amplifiers are more energy-efficient and are often preferred for subwoofers and bass-heavy applications.
Number of Channels: Metra car amplifiers are available in different channel configurations, including mono (1 channel), 2-channel, 4-channel, and even multi-channel models. The number of channels needed depends on the number of speakers and subwoofers in your car audio system.
Bridgeable Amplifiers: Some Metra amplifiers are bridgeable, which means you can combine two channels to power a single speaker or subwoofer with higher wattage.This flexibility allows you to customize your audio setup.
Compatibility: Metra amplifiers are designed to work seamlessly with other car audio components and accessories, including head units, speakers, subwoofers, and wiring harnesses. They often come with the necessary connections and controls for easy integration.
Installation: Installing a Metra car amplifier typically involves connecting it to the vehicle's electrical system using appropriate wiring and wiring harnesses. Installation should be done by experienced professionals or individuals with a good understanding of car audio systems to ensure proper operation and safety.
Sound Quality: Metra amplifiers are known for their ability to deliver clear and powerful audio output. They can significantly improve the sound quality of your car's audio system, providing better dynamics and bass response.
Protection Features: Many Metra car amplifiers include built-in protection features such as thermal protection, short circuit protection, and overcurrent protection. These features help safeguard the amplifier and your audio components from damage.
Size and Form Factor: Metra car amplifiers come in various sizes and form factors to fit different installation locations within a vehicle. Some are compact and can be mounted in tight spaces, while others are larger and may require more installation space.
Brand Reputation: Metra is a well-established brand in the car audio industry, known for producing quality products and accessories for vehicle audio and video installations.
In summary, Metra car amplifiers are essential components for upgrading and customizing your car audio system. They offer a range of power options, channel configurations, and compatibility features to meet the needs of different car audio enthusiasts. Proper installation and integration are crucial for achieving the best audio performance and ensuring the longevity of the amplifier and other audio components.
Below you can find our editor's choice of the best metra car amplifiers on the marketProduct description
Merchants and Marauders lets you live the life of an influential merchant or a dreaded pirate in the Caribbean during the Golden Age of Piracy. Seek your fortune through trade rumor hunting missions and of course plundering. The game features a unique trade system and a thematic combat system allowing for critical decisions and intense excitement. Modify your ship buy impressive vessels load deadly special ammunitions and hire specialist crew members. Will your captain gain eternal glory and immense wealth or find his wet grave under the stormy surface of the Caribbean Sea?
- Pirate theme
- For 2-4 players
- Takes about 3 hours to play
- Made in Germany
User questions & answers
Question: | Is this considered an Advanced board game |
Answer: | If you mean "I want to play this with my children who are aged under 16" by 'advanced board game' then I don't recommend this game because M & M has somewhat complex game rules but other than that this is a PerfecT pirate game. Highly recommended!! |
Question: | Quality of the game manufacturing? Quality of print on board and cards? Durability of board, box, and treasure chest? Quality of card cuts |
Answer: | I find the quality to be quite good. Parts are a nice heavy duty cardboard with a good quality outer layer with the print on it. The cards are OK, but since you don't hold them in your hand, I don't think there are any quality issues. The treasure chest is simple and well made. The board seems good as well. The punch out process was good on mine with no tearing from popping out the pieces. |
Question: | How does this game compare to Terra Mystica |
Answer: | I have never played Tetra Mystica, but this game is very complex and we could not figure it out, even as experienced gamers. Your choices are vast as to moves and plays. |
Question: | Is this game an English or Spanish version |
Answer: | As of 9/5/14 the image is of the Italian version. I contacted Amazon several times to correct this or clarify what version it is over the course of a couple weeks with no response or change. I contacted Art's Game Store Amazon marketplace vendor for this game and they assured me they sell the English version. Bought from them and it was indeed in English. Hope this helps and hope Amazon fixes this mistake. |
Product description
Product Features: Designed for Ford vehicles that have the common ground amplified systems with the "football style" amplifier Not for the JBL or LUX Systems 4 RCA Plugs plug into the aftermarket radio's pre-amp outputs 2-eight pin plugs For 1986-1993 Ford, Lincoln, and Mercury vehicle Allows for the installation of an aftermarket radio using the existing factory wiring and connectors No cutting of factory wiring needed 1-year Manufacturer's warranty
- Designed for the Ford vehicles that have the common ground amplified systems with the football style amplifier
- The factory harness will have the 8-way black rectangle plug with only 5 wires on it and it includes RCAs
- Designed with the user and installer in mind
- Tested for function in a real world environment
- Secure fit
- Designed for Ford vehicles that have the common ground amplified systems with the "football style" amplifier
- For 1986-1993 Ford, Lincoln, and Mercury vehicles
Product description
200 Watt Amplifier Kit. Includes 17ft. of 0 Gauge blue power cable, 3ft. of 0 Gauge black ground cable, 17ft. of Clear blue RCA cable, 25ft. of 12 Gauge speaker wire, 17ft. of Clear blue remote turn-on wire, 1 ANL fuse holder with 250 AMP ANL fuse, 0 Gauge gold ring terminal, Grommets, (10) 6" Cable ties, #6 Screws.
- 1/0 Gauge Value AMP Kit Complete 2000w - Each
- 17ft 1/0GA BLUE POWER WIRE
- 3ft 1/0GA BLACK POWER WIRE
- 1 RIGHT ANGLE RCA CABLE -17ft BLUE- SIDE BY SIDE -SINGLE
- INJECTION ENDS -NICKEL PLATED
Product description
Chrysler 05-Up Amp Bypass Harness Bypass for 300 - Durango - Magnum 2005-2006 204 Inch Long Speaker Wires Includes Power Harness.
- Bypass for 300 - Durango - Magnum 2005-2006
- 204 Inch Long Speaker Wires.The factory amplifier has the crossover built in
- Includes Power Harness
- Included components: AUTO_PART, Automotive Accessories, Lighting/Electrical, automotive-electrical-wiring-harnesses
- 204 inch Long factory amplifier bypass harness
- Power wires only, no speaker wires
- Harness is plugged in at the factory amplifier and ran to the location of the aftermarket radio or amplifier
User questions & answers
Question: | Would this fit my 2005 dodge ram 1500 with the infinity system that i want to bypass |
Answer: | I DON'T KNOW. I BOUGHT IT FOR MY 05 JEEP AND IT DIDN'T FIT |
Question: | Will this work on my 2007 Dodge Charger |
Answer: | I don't know, I used it for 05 Magnum, probably |
Question: | will this work for my jeep grand cherokee limited 2006. iam looking forward to install an aftermarket radio |
Answer: | Yes it will work with an 06 but if u r putting in a new head unit get the harness that uses the factory amp ( if u have the boston acoustic factory) as it is stronger then the head unit. If you do this you don't want the bypass harness. |
Question: | Will this work for 05 grand Cherokee with stealring wheel conteols and factory amp ? If not can u plz help me find the rightnone |
Answer: | The 70-6504 is an amplifier bypass harness, and has nothing to do with steering wheel integration. If wanting to retain the factory amplified system along with steering controls you would need the CHTO-01, and the ASWC-1. |
Product description
Ford Pre-Amplifier Plug 2 Harness Adapter Fits Most Ford Vehicles Compatible with Most Ford Vehicles for Broad Compatibility Allows Upgrades From Factory to Aftermarket Radio.
- Harness Adapter Fits Most Ford Vehicles
- Compatible with Most Ford Vehicles for Broad Compatibility
- Allows Upgrades From Factory to Aftermarket Radio
- Seamless Integration and Easy Installation with Color Coded Connections
- Copper Wire Transmits Signal with Fidelity
User questions & answers
Question: | will this fit my 2000 lincoln town car |
Answer: | No this is not for a 2000 town car .you need a 70-1771. i do not have one. |
Question: | will this work even if i dont want to use factory sub?i got the 70-5519 and it plays really low 2000 lincoln town car |
Answer: | If you dont want to use the factory sub and you already have the 5519 then you do not have to order the 5516. Just disconnect the square whit plug or unplug the rca and diconnect the amp turn on wire (blue/white). |
Product description
Plugs into car harness at radio. Provides rcas for retention of factory 35mm auxiliary jack. Auxiliary Input jack retention harness. 24 pin plugs into car harness at radio. Power 4 speaker. This product is manufactured in China.
- Factory amplifier harness includes 17ft. of 16 Gauge wire
- Harness can be plugged in at the factory amplifier and ran to the location of the aftermarket radio/amplifier
- One 24-pin plug and one 8-pin plug. 204 inch long. Must have RPO code.
- No cutting of factory wiring is needed. OLDS Pontiac 98-04 Amp Bypass
- Refer Product details below for User Manual (including the product compatibility)
User questions & answers
Question: | What color is the ground wire because i dont have a black wire |
Answer: | just ground from the receiver black wire (from radio to vehicle) |
Question: | I have a 04 Avalanche and a 04 Denali will this work for me bypassing Bose systems on both vehicles |
Answer: | A 70-2054 is a bypass harness for the factory Bose. So with that harness, you can use an LC-GMRC-01 to keep your Retained accessory power, and chimes. An ASWC-1 will allow you to retain the steering wheel controls. If you want to keep your factory amp, and still retain chimes and steering wheel controls as well, use an AX-GMCL2-SWC. |
Question: | I have 06 Silverado no bose or onstar I have a pioneer double din and mounting kit is this what I need to wire in the radio to plug infactory harness |
Answer: | This is for plugging into the harness that goes to the Bose amplifier, so if you don't have Bose, this is not the harness for you. |
Question: | Im installing a after market radio in a 03 chevy trailblazer is this what I need |
Answer: | Please note this is only the amplifier bypass harness. You still need Radio Kit - Based on radio purchased Antenna Adaptors Speaker Harnessses GM Data Interface Modules Steering Wheel Control interface. Please specify the Trailblazer Model with current radio features, Any factory Amps, Steering controls. Thank you |
Product description
Plugs into car harness. Power 4 speakers. For use with vw amplified speaker system. Amplifier integration harness. Designed for select Nissan vehicles with a factory amplifier. Compatible with premium sound system.
- Amplifier integration harness
- Designed for select Nissan vehicles with a factory amplifier
- Compatible with premium sound system
- 204 inch Long factory amplifier bypass harness
- 12-pin connector
- For 1999-2004 Jeep Grand Cherokee
- 1-year Manufacturer's warranty
User questions & answers
Question: | If run this from factory amp to aftermarket head unit on my 04 jeep do i just tie wires into the wire harness also have or is there no need for tht |
Answer: | The only reason to use this harness is to bypass the infinity amp but retain the original downstream wiring to the speakers so it could be restored to factory condition later - the wires should be connected directly to the aftermarket head unit's wiring harness and this will leave the factory harness undisturbed - or you can tee the wires into the aftermarket harness if you intend to draw power and other functions from the factory connector |
Question: | So i hook these up to the harness that’s connected to the amp and run the wires back to the dash unit ? also can i switch out the infinity amp |
Answer: | Yes to your first question .if you changed door speakers you should get a full range sound out of them . For your second question you would have to know which color wire went to what, depending on new amp type/input either cut off harness end at amp splice wires in To new amp harness or if new amp has terminals simply strip wire and connect correct wire to terminal. Hope this helps |
Question: | Do i have to have an aftermarket head unit or can i just bypass the amp off the factory head unit |
Answer: | You would need an aftermarket head unit, as the factory head unit doesn’t have enough watts to drive speakers without the factory AMP. |
Question: | Could you not make a jumper plug for the output side of the amp? Then you dont have to run all the way to radio |
Answer: | If you know what wires to grab, sure. Why go through the headache when this harness gives you every wire needed. It’s not really that much trouble to get it ran to the radio if you already have the radio out. |
Product description
Designed to be used for 2002-2004 Dodge Ram Trucks this harness is used to Bypass the Factory Infinity Sound System in vehicles without the Handsfree capable option.
You will want to check your rear view mirror for an icon of a telephone. If this icon is not present the Metra 70-6512 is the harness for you.
For Vehicles with the Telephone Icon please purchase Metra 70-6510
Product Features:
• 204 inch Long amplifier bypass harness
• One 22-pin power plug one 18-pin amplifier plug
• Harness is plugged in at the factory amplifier and ran to the location of the after market radio or the aftermarket amplifier
• For 2002-2005 Dodge Ram (Infiniti System)
Applications
2008 2010 300 / 300C
2005 2007 300C (w/o nav)
2005 2007 300C (w/ nav)
2005 2007 300 (w/o nav)
2005 2007 300 (w/ nav)
2007 2007 Aspen (w/o nav)
2007 2007 Aspen (w/ nav)
2006 2007 Charger (w/o nav)
2006 2007 Charger (w/ nav)
2005 2007 Dakota (w/o nav)
2005 2007 Dakota (w/ nav)
2004 2007 Durango (w/o nav)
2004 2007 Durango (w/ nav)
2005 2007 Magnum (w/o nav)
2005 2007 Magnum (w/ nav)
2009 2009 Ram (2500 / 3500)
2006 2008 Ram (w/o nav)
2006 2008 Ram (w/ nav)
- Plugs into car harness at radio
- Power 4 speaker
- This product is manufactured in china
- Factory amplifier bypass harness
- For 2005-2007 Chrysler, Dodge and Jeep Vehicles with premium sound system
- Allows for the installation of an aftermarket radio using the existing factory wiring and connectors
- No cutting of factory wiring needed
- 1-year Manufacturer's warranty
User questions & answers
Question: | Will this help to get to get the speaker to come on 2007 dodge charger |
Answer: | It worked for a 2008 jeep compass |
Question: | Will this fit my 2006 dodge magnum with the factory boston premium sound system |
Answer: | Yes the 70-6514 will work on a 2005 Magnum amplifier bypass. |
Question: | Does it fit a 2007 dodge ram |
Answer: | Yes it does, comes with several different plugs |
Question: | Dose this work with the 2006 Chrysler 300c? Will it by pass the factory Amplifier |
Answer: | It should. They make several different ones so make sure this is the one by verifying the plug ends are the same. |
Product description
Plugs into car harness at radio. Power 4 speakers. 1990-2002 bmw. Plugs into car harness at radio. One 16-pin plug and one 20-pin plug. Works with factory Infinity amplified systems.
- Plugs into car harness at radio
- One 16-pin plug and one 20-pin plug
- Works with factory infinity amplified systems
- 204 inch Long factory amplifier bypass harness
- 14-pin connector
- Harness is plugged in at the factory amplifier and ran to the location of the aftermarket radio or amplifier
- For 1997-2004 Dodge Dakota and 1997-2001 Jeep Cherokee
- 1-year Manufacturer's warranty
Product description
Product Features: 12" Long factory amplifier integration harness for select Ford vehicles, 4 RCA Plugs plug into the aftermarket radio's pre-amp outputs, One 8-pin plug and one 8-pin speaker plug, 1. 5K Ohm resistor can be used on the amp-remote wire to eliminate turn-on pop, Interface harness that is plugged in behind the radio and retains the factory amplifier, Harness is set up for low level inputs only using the RCA Outputs from the aftermarket radio, Compatible with select 1986-2000 Ford vehicles, Authorized Internet Dealer, 1-year Manufacturer's . Connections: Yellow – 12V Constant, Red – 12V Accessory, Black - Ground, Orange – Dash Light Dimmer/Illumination, Blue - Amplifier Turn-on For all amplified systems using a 35W or greater radio Amplifier integration harness Great for all your needs.
- Included components: AUTO_PART, Automotive Accessories, Lighting/Electrical, automotive-electrical-wiring-harnesses
- Compatible with select 1986-2000 Ford vehicles
- 12" Long factory amplifier integration harness for select Ford vehicles
- 4 RCA Plugs plug into the aftermarket radio's pre-amp outputs
- One 8-pin plug and one 8-pin speaker plug
- 1.5K Ohm resistor can be used on the amp-remote wire to eliminate turn-on pop
User questions & answers
Question: | Not even sure if I need them, yet, but... what kind of crimp caps/wire connectors would I need for these (in gauges |
Answer: | on my 2000 mustang/cd radio didn't need any connectors plug and play make sure you connect all blue wires makes your amp work |
Question: | I'm trying to replace the OEM CassetteRadio on my 1993 Lincoln TC w/ premium sound. New radio only has 2 RCA out. Will this work for me |
Answer: | As is it would only allow 2 speakers to play. You could possibly use something like the Pyramid RY6 1 Male to 2 Female RCA Adaptor to make all 4 speakers work. |
Question: | I was told all 1991 Mazda Navajos came with an amplified sound system. Is this true |
Answer: | That is true, yes |
Question: | will this harness protect my new sony CDX-GT55UIW from destruction when I power up? 1991 Navajo |
Answer: | I used this on a 95 mustang with mach 460 sound system. For itt to work correctly you need a stereo with 6 channel pre.amp output.As far as protection this is only designed to make the connection to your new stereo without cutting your factory harness. But if wired correctly I see no reason it could harm your stereo. |
Product description
204 inch long speaker wires. Includes power harness. Harness is plugged in at the factory amplifier and ran to the location of the aftermarket radio or amplifier. Plugs into car harness. High impact ABS OEM plastic molded connectors provide a perfect fit, OEM quality terminals. Allows for the installation of an aftermarket radio using the existing factory wiring and connectors, No cutting of factory wiring needed.
- Plugs into car harness
- High impact abs oem plastic molded connectors provide a perfect fit, oem quality terminals
- Allows for the Installation of an aftermarket radio using the existing factory wiring and connectors, no cutting of factory wiring needed
User questions & answers
Question: | I want to keep my factory radio in 2015 mustang prem audio, and hook to audiosource lc7i with factory wires so i can hook to my amps |
Answer: | it's purpus is to bypass the factory installed amp . |
Question: | so will this plug into the 2015 ford mustang factory amp or not |
Answer: | Metra has great tech support they helped me when I needed help with wiring issues. I called and they knew more about my cars wiring than I did when I was looking right at it. For Technical Support: [email protected] tel: 800.253.TECH (8324) |
Question: | Will this fit a 1990 lincoln mark vii lsc factory jbl amp |
Answer: | I don't know I used it on a 1995 Mustang gt 5.0 |
Question: | How do i plag this to eliminate my amp in a 1999 ford mustan |
Answer: | my went on a 92 ford explorer you have to find the amp unplug two wire harnesses from the amp and they should plug back together using the short harness it just plugs the two you unplugged from the amp bypassing the amp. |
Product description
Plugs into Car Harness. Power/4 Speaker. For over 70 years, Metra has maintained its cutting edge by paying attention to our marketplace and innovating products to fit the needs of the installer. We are the "Installer's Choice" because we are installers.
- Power/4 Speaker
- For over 70 years. Metra has maintained its cutting edge by paying attention to our marketplace and innovating products to fit the needs of the installer
- We are the "Installer's Choice" because we are installers
- Factory amplifier integration harness
- Plugs into car harness
- Power/4 Speaker
- 4 RCA Plugs plug into the aftermarket radio's pre-amp outputs
- One 16-pin power plug and one 10-pin speaker plug
Product description
Metra 70-8113 Amplifier Integration Harness for Select 2000-2004 Toyota Vehicles
- Factory amplifier interface harness that plugs in behind the radio
- Retains the factory amplifier
- Harness is set up for low level inputs using RCA Outputs from the aftermarket radio
- 20-pin connector
User questions & answers
Question: | Can I use this for 2 din dvd installation on toyota solara |
Answer: | Yes it will... I have same and jbl. Only thing u have to make sure is that your double din has rca cable plug ins for rear and front so total 4 or more if so your good if not u need a head unit to plug them in or u can do without the amp and run just the main wire harness n bypass amp |
Question: | Hi!, I want to know if this harness will work fine with my Camry 2006, do you know where I can find out how to wire it |
Answer: | You can go to www.crutchfield.com and find a stereo that you like by entering your vehicle information. It will tell which accessories needed for your car. This one should work for you car. |
Question: | I have a 2002 Toyota Camry and want to install a new head unit and an amplifier to power 4 component speakers. Do I need this cable or a different one |
Answer: | Hi you can go to crutchfield.com and they most likely tell you what you need. I used this on my 2006. Toyota Camry with JBL audio system. |
Question: | Can i use this and just not hook up an amp |
Answer: | More than likely not. If your car has a factory amp your connector is probably different. If you have a factory amp you need the amp bypass harness instead. |
Latest Reviews
View all
500W Power Supply
- Updated: 12.04.2023
- Read reviews

Joy Carpets Braided Rugs
- Updated: 12.05.2023
- Read reviews

Jlab Headphones Boses
- Updated: 11.02.2023
- Read reviews

Huda Beauty Liquid Lipstick Set
- Updated: 07.06.2023
- Read reviews

Canon Lens For Sports
- Updated: 25.01.2023
- Read reviews