14 best metra amp wiring kits

Product description

Double DIN radio provision Painted matte black Sub-dash modifications required Includes: Radio trim panel Brackets Retaining caps (5 large, 2 small) #8 x 1/2" screws #8 x 3/8" screws 70-6502 Wiring Harness Antenna Adapter Compatible With: Dodge Ram 1500 2002-2005 Dodge Ram 2500/3500 2003-2005

• Double DIN radio provision
• Painted matte black
• Sub-dash modifications required
• Includes: Radio trim panel, Brackets, Retaining caps (5 large, 2 small), #8 x 1/2" screws and #8 x 3/8" screws, 70-6502 Wiring Harness, Antenna Adapter
• Compatible With: Dodge Ram 1500 2002-2005 & Dodge Ram 2500/3500 2003-2005

User questions & answers

Question:	Are these all metra parts? What part numbers are in the kit
Answer:	Follow the instructions and it will look great. And no it’s mostly plastic but so is the rest of the dash. Mine turned out bitchen. 😎😎
Question:	does is fit a 7 inch touchscreen
Answer:	If your "7 inch touchscreen" complies with the double DIN standard then yes.
Question:	Will a boss touchscreen 7 inch fit
Answer:	Yes, will fit any 2-Din radio
Question:	How long does this take to to take the stock out and replace it with this
Answer:	One hour total. You have to remove old plastic welds then install this with screws. Trim dash support and wire radio. There are many YouTube videos of installing this kit. You will be very happy with it!

Product description

8 Gauge amplifier installation kit includes:

• 20 Foot / 8 Gauge Red Power Cable, High Quality Competition Fuse Holder
• 3 Foot - 8 Gauge Black Ground Cable
• 16 Foot / 18 Gauge Blue Turn-On Wire, 30 Foot / 16 Gauge Speaker Wire
• 20 Foot High Performance RCA Interconnect, 6 Foot Split Loom Tubing
• (20) 4" Wire Ties, Rubber Grommets
• 5/16" Ring Terminals, 1/4" Ring Terminals, Speaker Terminals

User questions & answers

Question:	does the fuse holder come with a fuse installed or do i need to pick one up and if so what kind
Answer:	It comes with the fuse holder and the fuse you have to install it but that's simple to do just install it about 6inches from the battery :)
Question:	What gage is the speaker wire
Answer:	The speaker wire in my kit was 16 gauge, I was hoping for at least 12 gauge.
Question:	How long is the rca patch cable
Answer:	20 feet gold rca cable. It's long enough for me:)
Question:	how many watts
Answer:	8 Guage can only handle a few hundred watts or so RMS. You might be able to get a 5-channel system that uses 700W RMS to be properly powered BUT that's probably right around the peak for this gauge of wire. That being said, BOSS WILL NOT WORK FOR THAT. Boss uses garbage materials and typically only deliver 1/3 of what they say they are delivering. I've seen the tests with my own eyes with wiring and amps and they fall apart. Don't wire anything more than 100W RMS or so total with this kit or you might melt it.

Product features

KIT2 Includes

Product description

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.



1. Our RCA cables are 100 % copper. These are top of the line RCA cables



2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.



3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.



4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

• 1 -17' High Grade Twisted Pair of 100% Copper RCA Cable
• 17' -4 Gauge Translucent Blue SuperFlex Power Cables
• 17' -18 Gauge Blue Remote Cable
• 17' -16 Gauge Clear Speaker Wire
• 3' -4 Gauge Clear SuperFlex Ground Wire

User questions & answers

Question:	I ordered this product and the description says 60 amp fuse but the one i received was a 80amp fuse am I the only one
Answer:	I had 60amp in mine
Question:	How many watts can it do
Answer:	I have it hooked to a Rockville 2600W amp.
Question:	What is the amount of wattage this kit can hold
Answer:	850 rms wattage would be the most I would run this on (although I wouldn't run 100% 850 continuous, it can handle it). Although if you have space you could trim it down to 12-13 feet and get it to 1035 rms wattage. This is about the limit of the wire. I'm not sure but I wouldn't try going above 800 continuous on the sub because if peak is higher than 800-850 the sub might clip at big drops. I have a Rockford Fosgate P2D4-12 Punch dvc 4ohm 12 inch 800 rms peak, 400 rms watt continuous I have it wired to 2 ohms so it could get 600 watts from my 1200 watt amp, but since the amp can only pull about 850 watts from the wire the sub will get up to 425 watts continuous. I don't run the sub at max but more like 75-85%. The reason why I think this is safe for my battery is I use a 2 farad capacitor that I think is at least 1 farad legitimately.

Product features

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

Product description

17ft 8GA blue power cable - 3ft 8GA black ground cable - 17ft clear blue RCA cable - 17ft clear blue remote turn-on wire - 1 - Mini ANL fuse holder + 60amp Mini ANL fuse

• 17FT 4GA Blue POWER WIRE
• 3FT 4GA BLACK POWER WIRE
• 1 RIGHT ANGLE RCA CABLE – 17FT Blue SIDE BY SIDE – SINGLE INJECTION ENDS
• 17FT 18GA Blue REMOTE TURN-ON WIRE

User questions & answers

Question:	So is it 4ga or 8ga kit? Title and description are different
Answer:	It's 8 GA with 4 GA fittings....save your money and buy elsewhere
Question:	Which sub wiring kit do i need for a 2006 ford taurus SE
Answer:	This doesn't have to do anything with your car or model you can use any kit you want it all depends what you are trying to do if you are adding just a sub with an amp this is fine the only difference between some of them is the gauge (wire) size (thickness) that come from your battery to your sub so the lower the number the thicker it gets
Question:	Title says 4 ga description lists 8 ga no question just annoying
Answer:	Thanks for pointing out that. I'll get that fixed.
Question:	What size fuse does this come with
Answer:	It comes with a 60 amp mini-ANL fuse.

Product description

Chrysler 05-Up Amp Bypass Harness Bypass for 300 - Durango - Magnum 2005-2006 204 Inch Long Speaker Wires Includes Power Harness.

• Bypass for 300 - Durango - Magnum 2005-2006
• 204 Inch Long Speaker Wires.The factory amplifier has the crossover built in
• Includes Power Harness
• Included components: AUTO_PART, Automotive Accessories, Lighting/Electrical, automotive-electrical-wiring-harnesses
• 204 inch Long factory amplifier bypass harness
• Power wires only, no speaker wires
• Harness is plugged in at the factory amplifier and ran to the location of the aftermarket radio or amplifier

User questions & answers

Question:	Would this fit my 2005 dodge ram 1500 with the infinity system that i want to bypass
Answer:	I DON'T KNOW. I BOUGHT IT FOR MY 05 JEEP AND IT DIDN'T FIT
Question:	Will this work on my 2007 Dodge Charger
Answer:	I don't know, I used it for 05 Magnum, probably
Question:	will this work for my jeep grand cherokee limited 2006. iam looking forward to install an aftermarket radio
Answer:	Yes it will work with an 06 but if u r putting in a new head unit get the harness that uses the factory amp ( if u have the boston acoustic factory) as it is stronger then the head unit. If you do this you don't want the bypass harness.
Question:	Will this work for 05 grand Cherokee with stealring wheel conteols and factory amp ? If not can u plz help me find the rightnone
Answer:	The 70-6504 is an amplifier bypass harness, and has nothing to do with steering wheel integration. If wanting to retain the factory amplified system along with steering controls you would need the CHTO-01, and the ASWC-1.

Product description

Metra 70-5521 Radio Wiring Harness for Ford 03-Up Amp

• Factory amplifier integration harness
• 2 RCA Plugs plug into aftermarket radio's pre-amp outputs
• One 24-pin power plug and one 8-pin subwoofer plug.Includes Ford Lincoln and Mercury 2003-2005 Turbowire and a 8-pin harness with a pair of RCAs for the OE woofer(s)
• 1.5K Ohm resistor can be used on the amp-remote wire to eliminate turn-on pop
• Allows for the installation of an aftermarket radio using the existing factory wiring and connectors

User questions & answers

Question:	does this work with 2005 ford f150 plz respond
Answer:	Yes, will work
Question:	Will this work on a 2004 ford explorer without premium audio
Answer:	No won't fit
Question:	I have a 2004 F150 I just want and Aux imput so i can play music. Will this do the trick. if so can i still use the normal radio
Answer:	The info I have says it will work on your F150. It gives power, speakers, and subwoofer. It will not give you aux input to your existing radio. You need to buy one with that input.
Question:	Where can I find instructions on how to hook up the 2 blue wires on the rca cables
Answer:	If you are installing in a Ford vehicle with factory amplifiers, you will need a 5 volt, power signal to turn the auxiliary amplifiers on. Most after-market head units send a switched, 12 volt signal out the blue or blue/white wire. If you Google "Metra 70-5521 Radio Wiring 5 Volt Regulator", you should find some pictures and instructions. Basically, connect the blue/white (amp/antenna power) line from your after-market stereo to the input of a 5 volt regulator (left side, I think, when looking at it, face up), connect the middle lead of the regulator (or metal mounting tab) to ground and the output (right side, I think) to the short blue/white wires on the Metra plug. This will put 5VDC on the trigger line for the factory amplifiers, when the head unit is powered on.

Product features

Metra 70-5521 Radio Wiring Harness for Ford 03-Up Amp

• For Base amplified sound systems (†)
• Includes a power harness and a 8-pin harness with RCA jacks for retaining the factory sub-woofer(s)

(†) Excluding Sony/THX sound systems

Product description

Wiring Harness for Select 2003-2008 Toyota Vehicles with JBL/JBL Synthesis Audio Systems. Interface Components TYTO-01 harness, TYTO-01 interface and 16-pin harness with stripped leads

• For select 2005-2007 Toyota JBL and JBL Synthesis amplified audio system
• Adjustable input gain
• USB update interface compatible

User questions & answers

Question:	The object image displayed is not the same of the one posted by some of the buyers, is this a different model from what used to be displayed
Answer:	How did you bypass the amplifier, assuming you installed an aftermarket to power the factory speakers for better sound. I have a 2011 sequoia with the JBL synth system (2nd gen I believe) and am not sure if it can be done.
Question:	Could someone explain, to a car AV newb, why I would need this over a standard wiring harness? I drive a 2003 Lexus IS
Answer:	This is a wiring converter. You need it to plug your new stereo into the Lexus speaker system. It's designed specifically for the IS300. I used it in my 2002.
Question:	Does it fit on Toyota corolla s
Answer:	If your corolla has a JBL system it will work
Question:	I have a 09 tacoma with jbl. will i need any other harneses or adapters to install a aftermarket radio
Answer:	that one is to start the amp. if you want to use your steering wheel control you will need this adapter xxess ASWC...

Product description

Wiring Harness for Select 1987-2005 Toyota and Scion Vehicles

• For select 1987-2007 Toyota and Scion vehicles
• Plugs into car harness at radio
• Power/4 Speaker
• One 10-pin plug and one 6-pin plug
• Allows for the installation of an aftermarket radio using the existing factory wiring and connectors

User questions & answers

Question:	does it include the dimmer wire
Answer:	The orange/white wire is listed on the Metro package as "dimmer", the orange wire (no stripe) is listed as "illumination."
Question:	what is the smaller 4 wire harness for
Answer:	Its for the L&R rear speaker connections in the 4 door truck.
Question:	What gauge wire is this? I want to use the correct crimp cap size. Thank you
Answer:	The wires on this harness are 16awg, not 18 or 22. I compared them side by side at a store carrying all sizes
Question:	Does this harness work if you have the two extra tweeter speakers? It says it is for 4 speaker so I'm not sure if it handles the tweeters
Answer:	I have the 6-speaker system in my 2002 Tundra AC and installed the JVC KW-R910BT HU which required the removal of the OEM amp. I wired up this adapter to the HU's harness and then plugged it directly into the truck's two connectors. ALL speakers produce sound. The tweeters are simply on the same circuit as the front door speakers.

Product features

Metra 70-1761 Radio Wiring Harness For Toyota 87-Up Power 4 Speaker

Description

• Plugs into Car Harness at radio
• Power – 4 Speaker

About Metra

We at Metra always strive to listen to our customers. You have told us to do a better job at telling the Metra story. For over 70 years, Metra has maintained its cutting edge by paying attention to our marketplace and innovating products to fit the needs of the installer. We are the 'Installer's Choice' because we are installers. We design our products to be easy to use and easy on the eyes.

Product description

Metra radio wiring harness for BENZ90-UP/LANDROVER99-04 PREM. This innovative product for car radio installations allows you to wire an aftermarket radio into a car without cutting and splicing the factory radio harness. Save time, money, and a safe and secure connection. When installing your stereo, don't settle for less than Metra. Features: High impact, OEM quality, ABS plastic melded connector for the perfect fit OEM quality terminals, makes the most secure connection possible between the terminals and the connector New GSXL wire provides more flexibility, power handling and heat resistance Precision hand assembled terminals are pressure-inserted into the plug (this makes it almost impossible to pull a wire out)Pre-stripped end leads allow for easy connections Wires are color-coded using the aftermarket radio industry standard (E. I. A. Color Code)A handy chart on the back of the package allows you to easily make all of the radios wire connections 70-1784 STYLE HARNESS.

• 70-1784
• STYLE
• HARNESS
• FEATURING
• RCA
• PLUGS
• INSTEAD

User questions & answers

Question:	I am connecting a kenwood kdc-2025 radio to my 2003 land rover discovery. is this the correct harness
Answer:	I used this harness to connect a Pioneer radio to my 2003 Land Rover Discovery and it worked great. I wanted to keep the factory amp so the RCA plugs were what I needed. If your Kenwood has this output it should work fine.
Question:	I need a harness to replace my factory stereo with aftermarket stereo 2002 S500 Mercedes-Benz
Answer:	There are fiber optics involved with your cars stereo that I don’t think this harness would support. It be part of what you need but not all.
Question:	Does this connect to factory radio? if not i have an extra after market radio. would it fit in a 1997 mercedes benz e
Answer:	It connects to the car harness. I modified the radio side but it was easy. Put rca collectors on with solder. Just needed to shorten all wires to fit in dash
Question:	would this work for a 2005 CL
Answer:	Unknown, I used it on a 98 e320 works perfect. I would assume not as it is listed for 94 to 2004 model years.

Product description

Plugs into car harness at radio. Provides rcas for retention of factory 35mm auxiliary jack. Auxiliary Input jack retention harness. 24 pin plugs into car harness at radio. Power 4 speaker. This product is manufactured in China.

• Factory amplifier harness includes 17ft. of 16 Gauge wire
• Harness can be plugged in at the factory amplifier and ran to the location of the aftermarket radio/amplifier
• One 24-pin plug and one 8-pin plug. 204 inch long. Must have RPO code.
• No cutting of factory wiring is needed. OLDS Pontiac 98-04 Amp Bypass
• Refer Product details below for User Manual (including the product compatibility)

User questions & answers

Question:	What color is the ground wire because i dont have a black wire
Answer:	just ground from the receiver black wire (from radio to vehicle)
Question:	I have a 04 Avalanche and a 04 Denali will this work for me bypassing Bose systems on both vehicles
Answer:	A 70-2054 is a bypass harness for the factory Bose. So with that harness, you can use an LC-GMRC-01 to keep your Retained accessory power, and chimes. An ASWC-1 will allow you to retain the steering wheel controls. If you want to keep your factory amp, and still retain chimes and steering wheel controls as well, use an AX-GMCL2-SWC.
Question:	I have 06 Silverado no bose or onstar I have a pioneer double din and mounting kit is this what I need to wire in the radio to plug infactory harness
Answer:	This is for plugging into the harness that goes to the Bose amplifier, so if you don't have Bose, this is not the harness for you.
Question:	Im installing a after market radio in a 03 chevy trailblazer is this what I need
Answer:	Please note this is only the amplifier bypass harness. You still need Radio Kit - Based on radio purchased Antenna Adaptors Speaker Harnessses GM Data Interface Modules Steering Wheel Control interface. Please specify the Trailblazer Model with current radio features, Any factory Amps, Steering controls. Thank you

Product description

Designed to be used for 2002-2004 Dodge Ram Trucks this harness is used to Bypass the Factory Infinity Sound System in vehicles without the Handsfree capable option.

You will want to check your rear view mirror for an icon of a telephone. If this icon is not present the Metra 70-6512 is the harness for you.

For Vehicles with the Telephone Icon please purchase Metra 70-6510

Product Features:

• 204 inch Long amplifier bypass harness

• One 22-pin power plug one 18-pin amplifier plug

• Harness is plugged in at the factory amplifier and ran to the location of the after market radio or the aftermarket amplifier

• For 2002-2005 Dodge Ram (Infiniti System)

Applications

2008 2010 300 / 300C

2005 2007 300C (w/o nav)

2005 2007 300C (w/ nav)

2005 2007 300 (w/o nav)

2005 2007 300 (w/ nav)

2007 2007 Aspen (w/o nav)

2007 2007 Aspen (w/ nav)

2006 2007 Charger (w/o nav)

2006 2007 Charger (w/ nav)

2005 2007 Dakota (w/o nav)

2005 2007 Dakota (w/ nav)

2004 2007 Durango (w/o nav)

2004 2007 Durango (w/ nav)

2005 2007 Magnum (w/o nav)

2005 2007 Magnum (w/ nav)

2009 2009 Ram (2500 / 3500)

2006 2008 Ram (w/o nav)

2006 2008 Ram (w/ nav)

• Plugs into car harness at radio
• Power 4 speaker
• This product is manufactured in china
• Factory amplifier bypass harness
• For 2005-2007 Chrysler, Dodge and Jeep Vehicles with premium sound system
• Allows for the installation of an aftermarket radio using the existing factory wiring and connectors
• No cutting of factory wiring needed
• 1-year Manufacturer's warranty

User questions & answers

Question:	Will this help to get to get the speaker to come on 2007 dodge charger
Answer:	It worked for a 2008 jeep compass
Question:	Will this fit my 2006 dodge magnum with the factory boston premium sound system
Answer:	Yes the 70-6514 will work on a 2005 Magnum amplifier bypass.
Question:	Does it fit a 2007 dodge ram
Answer:	Yes it does, comes with several different plugs
Question:	Dose this work with the 2006 Chrysler 300c? Will it by pass the factory Amplifier
Answer:	It should. They make several different ones so make sure this is the one by verifying the plug ends are the same.

Product description

Wiring Harness for Select 2003-Up Ford Vehicles

• Plugs into car harness. METRA Crown Victoria/Grand Marquis Marauder/Expedition (Late Production) 03 Turbowire 705520
• Power/4 Speaker
• 24-pin connector
• For select 2003-2007 Ford, Lincoln, Mercury vehicles
• Allows for the installation of an aftermarket radio using the existing factory wiring and connectors

User questions & answers

Question:	ford explorer
Answer:	If you are asking if they are labeled to where they need to go then yes. It tells you front positive and negative, rear positive and negative, remote wire for amp, power antenna etc. Red wire is switched 12v and yellow is 12v constant for memory. Very easy to wire up. I hope this helps you out and answers your question. :)
Question:	What is the right harness to use for boss elite 765blc stereo in 2006 ford 500 limited
Answer:	I would say Yes. This harness worked for my 2007 Explorer and matched the factory radio connector perfectly. You may not use all the wires on this harness depending on which Ford radio you are replacing. Makes installation a lot easier!
Question:	Is there a wiring diagram
Answer:	Yes
Question:	Will this work in my 2005 Ford Excursion
Answer:	I'm a ford fanatic and from my experience is that for a certain amount of years they use the same connectors as long as u don't have a premium system from factory...this product fit my 2005 focus with stock (not premium) stereo...triple check before purchase don't take my word for it.... but u can always return if need be...

Product features

Metra Electronics 70-5520 Wiring Harness for Select 2003-Up Ford Vehicles

• Plugs into car harness
• Includes one 24-way plug for power and speaker

Product description

Metra Electronics 95-2001 Double DIN Installation Dash Kit for Select 1994 - 2012 GM Vehicles

• Install dash kit for Double DIN/ISO Radios
• Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit
• Painted to match factory dash color
• High-grade ABS plastic construction
• Factory style texture
• Included Components: Double Din Brackets, Double Din Trim Plate, Spacers, Screws , Speed Clips
• Install dash kit for Double DIN/ISO Radios

User questions & answers

Question:	Will this fit in a 94 gmc
Answer:	Not without modifications
Question:	Does this fit a 05 chrysler
Answer:	Does this fit a 2000 grand marquis
Question:	It can be installed on a Pontiac VIBEgt 2004, and with any device double dim? (Pioneer AVH-P4300dvd
Answer:	Looks like you need the Metra 95-2009 instead. Check out www.metraonline.com and try out the vehicle fit guide to be sure. Also I would pull your old radio out and measure how much depth you have in the bay. My Pioneer AVIC-X850BT did not fit in my Grand Am with out some cutting of metal and plastic in the radio bay.
Question:	will this fit in a 2001 cadillac DTS
Answer:	Your vehicle is older than 2001... No

Product features

Metra Electronics 95-2001 Double DIN Installation Dash Kit

Product Features:

- Install dash kit for Double DIN/ISO Radios.

- Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.

- Painted to match factory dash color.

- High-grade ABS plastic construction.

- Factory style texture.

Kit Includes:

1. Radio Trim Plate.

2. Radio Housing Brackets Compatible with select GM Vehicles.

Product description

Bypass factory amplifier. Premium sound system. Allows for the installation of an aftermarket radio using the existing factory wiring and connectors. Bypass factory amplifier. Premium sound system. Allows for the installation of an aftermarket radio using the existing factory wiring and connectors.

• Bypass factory amplifier
• Premium sound system
• Allows for the Installation of an aftermarket radio using the existing factory wiring and connectors
• Included Components: Wire Harness
• Manual
• For 2006 Honda Civic with premium sound system
• Factory amplifier bypass harness

User questions & answers

Question:	Does it work on 2006 honda civic coupe ex with the navigation system
Answer:	yes
Question:	Does it work with Dasaita Headunit plug and play harness
Answer:	The 70-1727 is only Plug and Play into the vehicle, you must make the connections from the budget brand head unit, to the harness.
Question:	Does this harness have all the pins and wires coming out of it? about 19 or 20. Or just the speaker channels? about
Answer:	The wire hooked up ok with my 2008 honda civic SI harness but I didn't like the audio quality.. And the tweeters on top of the dash were not working so I took it out and went back to the stock amp set up.. I don't recommend this bypass set up unless you have to..
Question:	Does this work on a 2006 honda ex 2 door coupe with factory amp and no navigation
Answer:	Yes u would just have to remove the factory amplifier and connect the speakers directly, the sound is not bad no complain yet