13 best beltronic radar detectors
Beltronic radar detectors are electronic devices designed to detect and alert drivers to the presence of police radar guns or other speed measurement devices used by law enforcement.These devices are classified as vehicle electronics accessories and are utilized by drivers to help them maintain awareness of their speed and avoid potential speeding tickets.
Radar Detection Technology:
- Beltronic radar detectors use radio frequency (RF) receivers to detect the radar signals emitted by police radar guns.
- They are sensitive to specific radar frequencies commonly used by law enforcement, such as X-band, K-band, and Ka-band.
Alert Systems:
- When a radar signal is detected, the radar detector emits an audible alert, typically a tone or series of beeps, to notify the driver of potential speed monitoring nearby.
- Some advanced models also provide visual alerts on an integrated display, indicating the type and strength of the detected radar signal.
False Alert Filtering:
- To reduce false alerts caused by non-law enforcement radar sources like automatic doors or other vehicles, modern Beltronic radar detectors often incorporate advanced filtering technologies.
- These technologies help differentiate between genuine police radar signals and other non-threatening sources.
GPS Integration:
- Some models may include GPS functionality, allowing the radar detector to mark and remember specific locations where false alerts frequently occur.
- GPS integration can also provide alerts for known speed traps, red-light cameras, and other potential traffic enforcement areas.
Stealth and Concealed Designs:
- Beltronic radar detectors are often designed to be discreet and blend seamlessly with a vehicle's interior, aiming for a sleek appearance that does not draw attention.
- This design philosophy is intended to prevent theft and maintain a clean look inside the vehicle.
Legality and Regulations:
- The use of radar detectors varies in legality across regions and countries. Some areas may have laws and regulations restricting or prohibiting the use of radar detectors.
- It's essential for users to familiarize themselves with the laws and regulations of their specific location to ensure compliance.
Drivers use Beltronic radar detectors to improve their situational awareness and potentially avoid speeding tickets by being alerted to the presence of radar-based speed enforcement devices. However, it's important to use these devices responsibly and in compliance with local laws and regulations.
Below you can find our editor's choice of the best beltronic radar detectors on the market
Beltronics RX65-Red Professional Series Radar Detector
Product description
Beltronics Pro RX65 radar/laser/safety detector provides ultra performance! This detector has it all. Digital technology provides ultra long-range detection. Features include text display, digital voice alerts, 7 selectable features, and custom travel case. It integrates with Laser Pro 905 for laser blocking.
From the Manufacturer
Manufacturer's Description (October 30, 2008)
If you are as serious about safety as you are about driving, then you need the Professional Series RX65, an advanced radar, laser and safety detector. The RX65 is a breeze to use, and boasts extreme sensitivity to all Radar and Laser bands with over 10 times the range of other detectors.
 If you are as serious about safety as you are about driving, then you need the Professional Series RX 65. Click to enlarge. |
 Controlling alerts is right at your fingertips using the included SmartPlug power cord. Click to enlarge. |
 Includes quick release windshield mount. |
 Available with blue or red LED display. Click to enlarge. |
Superior Detection
The RX65 includes full X, K, SuperWide Ka, and Safety Warning System radar capability, front and rear laser detection, Beltronics' patented Mute and AutoMute, audible and visual band alerts, and all the performance you'd expect from Beltronics. Digital signal processing (DSP) gives you superior long-range ability, along with reduced false alarms. The AutoScan mode can virtually eliminate those false alarms, and provides both Highway and City settings.
The RX65 also features Shadow Technology making it immune to VG-2 radar detector detection, meaning law enforcement can't detect your radar detector, keeping you one step ahead.
Ease of Use
The rugged RX65 gives you control right at your fingertips using the included SmartPlug power cord. Patented Mute and AutoMute technology on the cord allows you to quickly silence alerts. Advanced programming lets you customize several features, and programmable bands let you set the device for your region, including International and North American settings.
Installation is a snap: use the quick release mount to attach it to your vehicle's windshield, and remove it in a snap. Don't want to leave it in your vehicle? No problem, Beltronics includes a travel case to keep it secure while you're on foot.
Ultra-Bright LED Display
Don't miss a visual alert with the RX65's 280-LED display. Exclusive threat display tracks and displays multiple radar signals, including signal strength. Tech Display provides actual numeric radar frequency for any radar signal. You can also view Safety Warning System (SWS) messages about upcoming hazards, construction and more.
Red Light, Blue Light
The RX65 is available in both red and blue LED models, so you can choose the display that most suits you.
How Safety Radar Works
Safety Warning System, or SWS, uses a modified K-band radar signal to alert users of Highway Construction or Maintenance, Highway Hazard Zone Advisories, Weather Related Hazards, Travel Information/Convenience, and Fast/Slow Moving Vehicles. The SWS safety radar system has 64 possible messages (60 currently allocated), all of which can be displayed on your RX65.
What's in the Box
Beltronics RX65 RED Professional Series Radar, hard shell metal case, coiled SmartPlug, quick release windshield mount, manual
- Full X, K, SuperWide Ka, and Safety Warning System radar capability, digital "POP" radar alert, and Safety Warning System message display
- Advanced AutoScan processing and digital signal processing increase range and virtually eliminate false alerts
- Easy-to-use programming allows you to customize up to 7 options for your specific driving style
- Immune to VG-2 radar detector detection, so law enforcement cannot detect its use
- One-year limited warranty
User questions & answers
| Question: | Does it detect photo |
| Answer: | No |
| Question: | have anyone use the escort passport 8500x50? how is it compare to this one |
| Answer: | To me it doesn’t sound as good as the a40s with mix amp pro. I also haven’t plugged it in my computer to update it either |
| Question: | What is x k ka ku mean |
| Answer: | No. It has a usb that comes with it that doesn’t require a adapter. |
| Question: | Besides speed traps, will this always or only sometimes go off when you pass a cop in traffic or one approaches from behind |
| Answer: | It’s not required |
Radar Mount Mirror Mount Bracket for Beltronics Radar Detectors - Beltronics RX65 STI Magnum, GX65 (3001001B)
Product description
MirrorMount brackets securely attach devices to your car's rear view mirror, with sturdy metal brackets, and no suction cups. They are compatible with nearly every vehicle. The Mirror Mount bracket securely attaches your Escort Passport 9500ix 8500X50 Redline X70 S55 Radar Detector to your vehicle's rear view mirror, and fits nearly every vehicle. After a quick, do-it-yourself installation, your device is secured in place with our all metal bracket, where it's easily in view, and won't fall off your windscreen. Made In The USA
- Radar Experts Agree, Best Mounting Spot!
- Complete mounting kit includes device clip.
- No More Troublesome Suction Cups.
- Installs in Minutes to Most Vehicles.
- Made in the USA. Detector not included.
User questions & answers
| Question: | Can u get a ticket for having |
| Answer: | Performance of the product? Let me put it this way: There simply is NO other mount that you should consider. These are that good. Expensive but worth it, especially if you have multiple vehicles and want the convenience of easily moving from one to the next. |
| Question: | Is there enough room to flip the mirror up and down? The picture shows the detector right up against the toggle |
| Answer: | Yes! |
| Question: | I have a Bel Rx65 and a 2015 Corolla S. I ran wiring to map light so it's ready. Is it easy to release so I can pull the Bel down while not in car |
| Answer: | I use the passport 8500x50 and it has not let me down, it does has a very long range in both city and rural areas. I also own the Escort Passport 9500IX which by far is one of the best on the market! The main difference in the Passport detectors is the GPS feature which cuts down on false alarms tremindesly and allows for voice red light camera alerts and your speed is also displayed when the alarm goes off on the 9500IX. As for the Beltronics RX65 in question, it is a good detector also. I purchased this for my sister and would use my self if needed. It also has a smart cord which in my opinion is a must, for easy mute of false alarms (mainly X=band). I definitely would not purchase anything less than the Beltornics, it is a very good detector at a very nice price. In the end if I had a choice, I would pick the Passport. |
| Question: | Would this fit on my Lamborghini Diablo and stay attached @ 185 mph |
| Answer: | X band is 10.5GHz in frequency, it is rarely used anymore in most places - but some agencies still use it. Beware! K band is around 24.150GHz +/- 100MHz meaning it can vary 24.05GHz to 24.250GHz due to where the manufacturer set up a particular unit to temperature related frequency drift. And Ka band which is centered at 34.7GHz but has a band width of 1300MHz!!! Different brands of radar use different slices of this band, it is the hardest to detect because most all radar detectors are scanning all the bands rather than trying to fit that wide of a bandwidth into the reciever at once! So if your detector is spending time looking for a frequency that isn't used where you drive the most, that's a lot of missed opportunity for detection! Band segmentation is a key feature! Turn off frequencies that you don't need to look for!!! |
Radar Detector DC Vehicle Lighter Power Cord for Escort Valentine One V1 Beltronics Uniden and More, FouceClaus Replacement Power Adapter for Radar Detectors with Dual USB Ports(6Ft Cable)
- 6Ft Coiled cord vehicle lighter plug for Beltronics / Escort Passport / Uniden and more radar detectors (NOTE: This is not the smart type cord).
- 2 USB Ports: Charge your mobile devices while still using the radar detector. 3.1A output usb charging provides full-speed charging for any mobile devices.
- Input: DC 12V / Cable Output: 12V-2A(Max) / USB Output: DC 5V-3.1A(MAX).
- Compatibility: Replacement charger power supply for Valentine One, Escort Passport 9500i, 8500 X50, Solo S2, Passport 7500S, 8500, 7500, 6800; Beltronics STi Driver, Pro RX65, Pro RX55, Vector 995, 965, 955, 940 (phone style connector), 895, and Express 795; Uniden LRD950 Laser Radar Detector with GPS and most Radar Detectors with RJ-11 "telephone style" jack.
- Backed by a one year warranty from FouceClaus for peace of mind. Contact our customer service team at any time for no-hassle troubleshooting and replacement or for any questions about purchasing.
User questions & answers
| Question: | Is this compatible with the Passport 9500ix |
| Answer: | Brackets tend to be standard I am sure it will fit but cannot assure it! |
| Question: | Will this work for a Passport Max |
| Answer: | As long as you do not have it in a way that obstructs your view, you should be fine. With that being said radar detectors themselves are not legal in every state (Virginia being the only one, that I know where it is illegal). |
| Question: | Will this work with an escort Passport S |
| Answer: | You can adjust. Articulates at two points. You can adjust to get at least 2" below mirror. Best mount ever used. Been in to radar detectors since late 80's.Save yourself trouble and use blue loctite on screws on first use or you will do it later. |
| Question: | Will this work and power a uniden radar detector |
| Answer: | Yes. You attach the mount that came with your detector, minus the suction cups onto the Mirror Mount. The detector can be remove from the mount by pressing the release button on the detector and sliding it off just as you would now. |
Car Radar Mount, Crossery Windshield & Dashboard Radar Detector Suction Mount for Escort Passport, Beltronics Vector & Rocky Mountain Phantom-T Radar Detectors, Easy To Install, Adjustable, Black
Crossery
Product description
CROSSERY CAR RADAR MOUNT – THE BRAND YOU CAN TRUST!
Are you looking for a smart easy way to mount your radar detector and keep it safe from sudden bumps and vibrations, or fed up with cheaply made radar mounts that cover the sensors of the detector?
Look no further:
Introducing ☆CROSSERY CAR RADAR DETECTOR MOUNT☆
Our mount has a strong suction, so you can use it as a windshield radar mount or dashboard radar detector mount. Simply press the pressure switch to lock the suction or open the pressure switch to release the suction.
NEED MORE REASONS TO CHOOSE OUR RADAR MOUNT?
✔ Sturdy construction with premium quality ABS + rubber for years of use.
✔ Easy installation.
✔ Adjustable for optimal radar detection to the windshield.
✔ Fits almost all cars and SUVs including BMW, Mercedes-Benz, Acura, Lexus, Toyota, Honda, Nissan etc.
BROAD COMPATIBILITY
Our windshield mount is compatible with following radar detectors:
Most Rocky Mountain Phantom-T, Escort and Beltronics radar detectors, including S55, New Passport, Redline, STi Magnum, STi Driver, GX65, GX55, RX65, RX55, V6, V8, V10, V12, Pro 100, 200, 300, 500, Vector 895, 995, 965 and 955, Newer Vector 940 and Express 795, Passport 9500ix, 9500i, 8500x50, 8500, 7500S, 7500, 6800, 5000, 4600, 4500, and 4200, Solo S2, S3, RD-5110, 4 and 5.
Our mount is not compatible with: MAX Series, Passport iQ, SmartRadar or PASSPORT Max models
BACKED BY 2 YEAR COMPREHENSIVE WARRANTY!
Your satisfaction is our #1 priority, but for any reason, if you are not completely satisfied, simply contact our friendly customer support and we do everything to make you 100% satisfied with your purchase.
SO WHY WAIT? CHOOSE US NOW.
(Detector not included)
- ⇒ A SMART WAY TO MOUNT YOUR RADAR DETECTOR. With thousands of cheap imitations, finding a perfect car radar detector mount is a real challenge. But if you choose CROSSERY you are always backed by quality, simplicity and affordability. This full featured radar mount offers easy and convenient mounting solution without blocking your visibility and disturbing the performance of the detector.
- ⇒ A WORLD CLASS DESIGN. Our car radar mount is compatible with almost all Escort, Beltronics and Rocky Mountain Phantom-T radar detectors. With the rotating knob you can adjust the angle of the detector to make it perfectly match with the pitch of the windshield.
- ⇒ PREMIUM BUILD. Crossery Radar Detector Mounts are made from the highest grade materials for superior performance under extreme heat and cold weather conditions and its powerful single suction cup offers strong adherence to the windshield or dashboard. Also, it has an aesthetic black finish that complements the interior of most types of vehicles.
- ⇒ EASY INSTALLATION. Simply open the locking clamp, position the sticky cup on the windshield or dashboard and close the locking clamp. Then carefully slide the bracket into the detector mounting slot. Our car mount will hold your radar detector firmly, even on the most rugged roads.
- ⇒ 100% SATISFACTION GUARANTEED. You are protected by our 2 YEAR COMPREHENSIVE WARRANTY and if you aren’t completely thrilled with our escort radar mount for whatever reason, you can request a FULL REFUND or we will send you another BRAND NEW CROSSERY CAR RADAR DETECTOR MOUNT to your door step. No questions asked.
User questions & answers
| Question: | Beltronics 985 compatible? How long is the mounting arm |
| Answer: | it should fit if the unit us plain suction cups, by that I mean no special specs. |
| Question: | Hi there, Does this work with the escort redline? Thanks |
| Answer: | I'm not familiar with the '01 740iL - The detector mount clamps to the shaft holding the rear-view mirror to the windshield. If the shaft diameter is exact or very close to the manufacture's specification it should work if there is about a half inch of shaft open to attach the clamp - The wiring option is designed to tap the +12VDC and Ground used to power an electronic dimming mirror - If this is the case, you can tap into this power source. |
| Question: | Does this fit the Passport 9500ix |
| Answer: | No you would need BBE-3030 |
| Question: | Hello, does this mount work with the escort max 360 radar detector? thank you |
| Answer: | I don't have a 9500ix Passport but have had various different mounts for an 8500 Passport and don't see why a radar mount would effect a GPS system, whether it's combined with your radar detector, and indash unit or aftermarket GPS. |
ChengFu Radar Straight Power Cord Compatible with Escort & Beltronics Radar Detectors (3.5m/11.5ft)
Product description
Compatible with?
Escort Radars models: Passport 9500i, Escort Passport SC55, Radar Passport 8500 X50, Solo S2, Passport 7500S, Passport 8500, Passport 7500, Passport 6800, C65 Escort Passport, Valentine One Radar Detector.
Beltronics Radars models: STi Driver, Pro RX65, Pro RX55, Vector 995, Vector 965, Vector 955, Vector 940 (phone style connector), Vector 895, Express 795, Solo S3 Solo-S3 Escort Passport Radar, Solo S2.
- The Escort & Beltronics straight power cord is 3.5m/11.5ft.
- The Escort & Beltronics Straight Power Cord can reach your plug-in without any problem, and can make the wire go around or around, so it will not hinder you, nor interfere with anything else in the car.
- High quality Escort & Beltronics straight power cord adapter, compact, light and easy to use. Red LED indicator light confirms cord is receiving power.
- Compatible with Escort: Passport Radar 8500 X50, 8500 Escort Passport Radar 6800, 7500, 7500S, C65 Escort Passport, Valentine One Radar Detector.
- Compatible with Beltronics: GX65, Pro 100, Pro 200, Pro 300, Pro 500, RX65, RX55, STi Driver, STi Magnum, Vector 995, Vector 965, Vector 955, Vector 895, Express 795.
User questions & answers
| Question: | Is this cable flat |
| Answer: | It will only detect them if they are running their radar speed device. |
Escort & Beltronics Radar Detector Coiled Power Cord
Product description
Ergotron Coiled Extension Cord Accessory Kit
- For Beltronics GX65, Sti Magnum, STi Driver, RX65, RX55, 995, 965, 955, 940, V8, V6
- For Escort iQ, 9500ix, 9500i, 8500 X50, 8500, 7500S, 7500, 6800, C65, RedLine, Solo S2, Solo S3, SC55
User questions & answers
| Question: | Will this work with the escort Solo S4 instead of using the wireless feature |
| Answer: | I'm not sure ... I don't recommend this product if you live in Florida like I do or someplace just as hot.... i had it less than a year and the sticky stuff to keep it on the window melted throughout the month and just dripped down the glass and left residue everywhere.... I would recommend it for colder states as your car wont heat up like a sauna haha |
| Question: | how long is the cord |
| Answer: | This is just the suction cup to hold the radar detector and not the actual radar detector. I bought this for my passport s55 and both work great. |
| Question: | Is this work with Solo s |
| Answer: | Thank you for contacting Crosley Brands. No, this item does not have speaker outputs for external speakers. Kindest regards, |
| Question: | Fits Valentine |
| Answer: | Thank you for contacting Crosley Brands. This item has a headphone jack, but no USB port. Kindest regards, |
Straight Power Cord for Beltronics/Escort / V1 Radar Detectors
Product description
Straight Power Cord for Beltronics, Escort and Valentine Radar Detectors with RJ-11 "telephone style" jack. Cord measures 1.5 meters (5 feet) in length. 90 day warranty. Works with the following Escort models: Passport 9500i, Passport 8500 X50, Solo S2, Passport 7500S, Passport 8500, Passport 7500, and Passport 6800 Works with the following Beltronics models: STi Driver, Pro RX65, Pro RX55, Vector 995, Vector 965, Vector 955, Vector 940 (phone style connector), Vector 895, and Express 795. Also compatible with the Valentine One Radar Detector.
- Escort
- Beltronics
- Valentine One
- Telephone style plug
User questions & answers
| Question: | Will this work on a escort passport s |
| Answer: | No, it doesn't. |
| Question: | Does this work with Valentine One |
| Answer: | You can play the record with the dust cover closed. |
| Question: | Will this work for the Escort 9500ix |
| Answer: | Yes. |
| Question: | does this work with the x |
| Answer: | Only if you use an aux cable. |
Noa Store Car Windshield Suction Cup / StickyCup Mount Compatible with Escort and Beltronics Radar Detectors
- Replacement windshield suction cupse heat
- Extra mounting bracket
- Fits firmly on car's windshield for easy access
- Easy to install with adjustment knob
- Superior performance under extremheat and cold weather
User questions & answers
| Question: | Will this fit Escort Max 11 radar detector |
| Answer: | That depends on your own need. If you need more isolation, you can try foam tips. These Joymiso earbuds are compatible with ear tips with standard hole and there're lots of offers on amazon. Besides, there're 6 different sizes replacement ear tips in the package. You can definitely find tips that fit your ears best. |
| Question: | Will this fit the cobra xrs series radar detector |
| Answer: | I don't remember. I don't think so. |
| Question: | Does this work with the classic escort redline |
| Answer: | The cord is 130cm/51in long. |
| Question: | does this fit the beltronice GT |
| Answer: | The circumstance is an inch and a half. The diameter is 3/8". The length of the outer section is 3/8". The total length from the outer side to the inner earbud is just under 3/4 of an inch. The circumstance of the inner ear bud is an inch and a quarter. (1 1/4") P.S. I don't know the Sonix Micro. |
Product features
Worried about your radar detector falling off? We got you covered
Super sticky suction mount
Powerful single suction cup design
strong metal clip that inserts into the radar detector
Offers strong adherence to the windshield & dashboard
Compatibility: Escort and Beltronics Radar Detectors
This will fit firmly on car's windshield for easy access.
HSTECH 10 Pcs Radar Detectors Suction Cups for Clear Cobra Escort and Beltronics Radar Detector Mount
HSTECH
Product description
Suction Cups for Clear Cobra Escort and Beltronics Radar Detector Mount.
- Suction cups fit all Cobra, Escort and Beltronics Radar Detector mounting brackets suction cups.
- Suction cups are slightly larger than Original Manufacture and stick great!
User questions & answers
| Question: | Will this work on Valentine One radar bracket |
| Answer: | I don’t see why not although I have not tried it. |
| Question: | What are the dimensions of the suction cup |
| Answer: | Sure, I did...the problem is the type of effects you have it set on......they may interfere with this Auto Wah device. |
| Question: | What is the diameter of the suction cup? Don't plan on using it for a radar detector mount, btw |
| Answer: | No, it does not. |
YeeBeny Windshield Suction Cup Mount Holder Compatible with Laser Detectors & Radar Escort Passport 9500ix 7500 X80 X70 X50 Solo S4 SC 55 s75 Beltronics RX65 Red (Bracket & 6 Suction Cups)
Product description
Not Compatible:
Escort IX & MAX Series
Compatible Escort Models::
Passport 9500ix, Passport 9500i, Passport 8500x50, Passport 8500,
Passport 7500S, Passport 7500, Passport S55, S75, 6800, 5000, 4600, 4500,
and 4200 Radar, Solo S2, Solo S3, Solo S4.
Compatible Beltronics Radar:
GX65 Red, GX55, RX65, RX55, V6, V8, V10, V12,
Pro 100, Pro 200, Pro 300, Pro 500, Vector 995, Vector 965, Vector 955,
Newer Vector 940, Vector 895, Express 795, STi Magnum, STi Driver.
- Brand New Windshield Mount & 6 Suction Cups.
- Compatible Escort Models: Passport 9500ix, Passport 9500i, Passport 8500, X50, Passport 8500, Passport 7500S, Passport 7500, Passport S55, S75, 6800, 5000, 4600, 4500, and 4200 Radar, Solo S2, Solo S3, Solo S4. (Not for Escort IX & MAX Series)
- Compatible Beltronics Radar: GX65 Red，GX55, RX65, RX55, V6, V8, V10, V12, Pro 100, Pro 200, Pro 300, Pro 500, Vector 995, Vector 965, Vector 955, Newer Vector 940, Vector 895, Express 795, STi Magnum, STi Driver.
- Note: Don't place the mount in or near the deployment area of the airbag, and don't install it in a position that obstructs road observation.
User questions & answers
| Question: | Is this compatible with the escort x80 Radar |
| Answer: | No you can pair into it as a blue tooth speaker but not out. You can plug in a blue tooth receiver to the headphone jack but you’ll loose some audio quality there. |
| Question: | Does this radar clip fit and laser 360 16 band V7 detector |
| Answer: | If recording from Vinyl record, AUX, tape, Bluetooth, CD to USB Flash Drive, the recorded files on the USB drive will be MP3 enocoded. |
| Question: | Does this fit a K40 detector |
| Answer: | I really didn't notice that...it sounded like the "one" I played was ok...same with the "one" cassette I played...I was more interested in the playing 78 records I had and that didn't go too well....sent the original one back in 2 days as damaged...and that's the Tech's comment...then the replacement they sent...same problem with the phono process...sent it back the same day I received it....that's "O for 2". Mfg Tech said the answer should be turn the unit off...turn the traveling screw 1/4" clockwise, turn it back on and try...if that doesn't work, repeat the process but turn the screw 1/4" counter clockwise....did that 7 times, off, turn screw, turn unit on, etc. etc...no user should have to go through that process just to play a phonograph....as well as the directions stating "that screw is strictly for steading the turntable for shipping purposes...and ..has nothing to do with the operation of the unit".....apparently no told the Tech that. Very disappointed. |
| Question: | Is this compatible with a whistler CR |
| Answer: | YES! You can either plug headphones into the 3.5mm headphone jack in the front of the unit OR use the RCA jacks in the back of the unit to use external powered speakers. I own the Edifier R1280T Powered Speakers and they work beautifully with my Victrola 8 in 1. Anyone who says you can't use external speakers does not deserve to listen to music! |
Stellar-Deals. 3 Suction Cups Bracket for Escort Passport & Beltronic Radar Detectors Bracket Mount W/3 Suction Cups
Product description
Stellar-Deals 3- cups Bracket. New Designed PERFECTLY ALIGNED Windshield Mount Bracket compatible with Escort & Beltronics Radar Detectors w/3 Clear Suction Cups for Extra strength. The bracket is compatible with Beltronics:New Bel V6 and V8, GX65, Pro 100, Pro 200,Pro 300,Pro 500,RX65, RX55, STi Driver, STi Magnum, Vector 995, Vector 965, Vector 955, Vector 895, Express 795 Escort Passport 9500ix, 9500i, 8500 X50 Black, 8500 X50, 8500, 7500S, 7500, 6800, 5000, 4600, 4500, 4200, C65, RedLine, Solo S3, Solo S2, Solo RD-5110, Solo 5, Solo 4, SC55, PROTECT YOUR RADAR DETECTOR FROM FALLING AND BREAKING! The summer heat!or the COLD weather!. This mount and suction cups are the perfect fit, holding tight no wobble and also Will Not easily Fall Off under any weather conditions Is about time to get a new set of brackets! The old mount for your Escort Passport & Beltronics might be falling off the windshield causing your radar to fall and break! A new Bracket with now three , not only 2 suction cups will either completely resolve this issue. Many customers also get one for their other car. Simply pop the radar into the other mount, and its all set to go, no lining up, just pop in and go. This specially designed bracket holds 3 suction cups, providing you a more secure way to attach you Escort and Beltronics and Escort Radar to your car windshield. The suction cups are specially made and designed for strong attachment to the windshield for all sorts of climates and bumpy roads. Very cold weather, very hot weather, windy or bumpy roads etc. Beltronics GX65, RX65 ,RX55 Radar Beltronics STI Driver Radar, Beltronics PRO STi Magnum Radar Pro RX55, Pro GX65, Radar Pro 100, Pro 200, Pro 300, Pro 500 Vector V965 895 Radar Escort Passport iQ Radar 9500ix 9500i Escort Passport Radar 8500 X50, 8500 Escort Passport Radar 6800, 7500, 7500S, C65 Escort Passport Redline Radar Laser Detector Solo S2 Solo-S2 Escort Passport Radar Solo S3 Solo-S3 Escort Passport, Escort Passport SC55 Radar.
- Will not fit Passport Escort Max, requires a bigger bracket
- 3- cups Bracket compatible with Beltronics and Escort Generic bracket 3 SUCTION CUPS A++
User questions & answers
| Question: | will this mount fit (escort) Passport |
| Answer: | Hello, Yes our RadarMount.com Mirror Wire power cable is compatible with your E89 BMW Z4. Thanks. |
| Question: | will this work with beltronics |
| Answer: | too long, This was a waste of money, it wont work on the dash, unless you want it upside down, and it sticks out way to far on the windshield |
| Question: | will this fit a cobra esd-6550q |
| Answer: | Hi there Thank you for your question, yes our mount does work on the Escort Redline series. Thanks |
| Question: | Will this hold a 9500 off the windshield itself so it doesn't rattle |
| Answer: | That’s what I used it for works good. |
Radar Mount RJ11 Mirror Wire Radar Detector Hardwire Power Cord for Beltronics Detectors (3005201B)
Product description
Use a Radar Mount Mirror Wire power cord to quickly hardwire your Radar Detector to your car's powered rearview mirror in minutes! Fits all cars with powered rear view mirrors only (auto-dimming, compass, map lights). Pair a MirrorWire cord with our MirrorMount for the ultimate factory-installed appearance, and superior detection range!
- Quickly hardwire your Radar Detector in minutes!
- Compatible with Beltronics Detectors.
- Inline micro-fuse protects your device.
- 12" Mesh-Loomed Cable with 0.075" Quick-Insert taps.
- Tap Adapters included for smaller harnesses.
RadarMount.com PN 3005201B - RJ11 Mirror Wire Power Cord for all Beltronics Detectors.
- Quickly hardwire your Radar Detector in minutes!
- Compatible with Beltronics Detectors.
- Inline micro-fuse protects your device.
- 12" Mesh-Loomed Cable with 0.075" Quick-Insert taps.
- Tap Adapters included for smaller harnesses.
User questions & answers
| Question: | Is it compatible with the Beltronic RX65 ( both wire should be at the extreme right of the RJ11 connector |
| Answer: | No, they do not. |
| Question: | if you use this as you power supply, how do you "mute" alerts |
| Answer: | You will need the pair that has a microphone if you plan to use it to answer phone calls. Here is a link to the one that has the microphone. I have been using these earbuds for years for running and they stay in my ears great. They are pretty durable as well. Other earbud headphones I've purchased fall out while I'm running or stop working due to sweat but these are meant for sporting activities. I buy these basic ones for my son and I since we go thru them often but the updated model with the microphone works well and I have been happy with the quality of both pairs. https://www.amazon.com/Haenr15am-Gumy-Sports-Earbuds-Microphone/dp/B0711YKNLW/ref=sr_1_19?crid=3L8YQ2DPNEE8Y&keywords=jvc+sport+headphones&qid=1552393657&s=gateway&sprefix=ivc+sport+tea%2Caps%2C172&sr=8-19 |
| Question: | I have a Ford Explorer 2012, will the connectors work w/molex behind the rear view mirror |
| Answer: | These work great for running. I use them daily in the gym and when I go for my runs. They stay in my ear and sound great for cranking it up for that last mile push! Only problem I've had was some of the insulation has come loose but I don't take that great of care of them either. They are holding up great other than that. |
| Question: | Will this work for 2012 Tundra |
| Answer: | yes you can. |
HSTECH 8 Pcs Radar Detectors Suction Cups for Clear Cobra Escort and Beltronics Radar Detector Mount
Product description
High Quality Radar Detectors Suction Cups
Compatibility: Beltronics, Escort: Workswith: Redline, STi Magnum, STi Driver, GX65, RX65, RX55, Vector 995, Vector965, Vector 955, Newer Vector 940, Vector 895, Pro 100, Pro 200, Pro 300, Pro500 & Express 795, Passport 9500ix, Passport 9500i, Passport 8500x50, SoloS2, Solo S3, Solo RD-5110, Solo 4, Solo 5, Passport 7500S, Passport 8500,Passport 7500, 6800, 5000, 4600, 4500, and 4200.
COBRA: SSR-50, SSR-80, ESD-7100, ESD-7330,ESD-8200, ESD-9000, ESD-9290, ESD-767, ESD-777, XRS-747, XRS-757, XRS-777,XRS-888, XRS-950, XRS-970, XRS-9840, XRS-9845, XRS-9300, XRS-9330, XRS-9340,XRS-9345, XRS-9370, XRS-9400, XRS-9430, XRS-9440, XRS-9445, XRS-9470, XRS-9500,XRS-9530, XRS-9540, XRS-9545, XRS-9550G, XRS-9570, XRS-9600, XRS-9630,XRS-9640, XRS-9645, XRS 9965, XRS-9670, XRS-9690, XRS-9700, XRS-9730, XRS-9740,XRS-9745, XRS-9775, XRS-9830, XRS-9840, XRS-9845, XRS-9880, XRS-9930, XRS-9940,XRS-9945, XRS-9950, XRS-9955, XRS-9960G, XRS-9965, XRS-9970G, PRO-9780,XRS-9985, iRAD 100, iRad 200, iRAD 900, SPX-5500, SPX-7800BT
- Suction cups fit all Cobra, Escort and Beltronics Radar Detector mounting brackets suction cups.
User questions & answers
| Question: | Are these silicone or pvc |
| Answer: | Thank you for contacting Crosley Brands! No, our units are set up for US and Canadian voltage only. |
Latest Reviews
View all
Yamaha Guitar Tuners
- Updated: 11.06.2023
- Read reviews
Criminal Justice Books
- Updated: 18.07.2023
- Read reviews
Focus Camera Wildlife Cameras
- Updated: 08.03.2023
- Read reviews
Elf Mascaras
- Updated: 28.07.2023
- Read reviews
Sea Dog Dog Whistles
- Updated: 26.02.2023
- Read reviews