3 best portable fish finder ice fishing

• Waterproof : The portable fish finder is waterproof in rains. No need to worry the splashes makes the display damaged any more. Even though the portable fish finder dropped into the river or lake, the fish finder would be floating on the water surface. You just need to put the handheld fish finder in open air after fishing to avoid water vapor generated inside display because of the temperature differences.
• Water Depth & Fish Location : You can easily get to know the water depth when the sonar transducer fully in the water. If you attached the sonar transducer to the hull your boat or kayak, you will know the water depth distribution of a specific area when the boat or kayak is moving. It will be easier to find a good position for fishing. Meanwhile, you could also know the approximate fish location and fish size by the portable fish finder display.
• Stable Sonar Transducer : The sonar transducer of the portable fish finder is working stable and reliable both in freshwater and saltwater. It offers a 45° beam angle underwater in 200Khz which supports maximum 328ft/100m water depth detection. There is a 25ft/7.62m extension cable and an anti-fish bite plastic float comes with the sonar transducer. The portable fish finder is USB rechargeable by a built-in lithium battery.
• Data Display : The fish finder displays water depth and temperature on the left top. The measurement unit can be freely changed in FT/M and ℉/℃. Besides water depth and fish location, you can also choose a particular underwater area to watch the size and location of the fishes.
• Ideal for Fishing : LUCKY waterproof fish finder is widely applied in ice fishing, kayak fishing, boat fishing and bank fishing. The portable fish finder can be working for 5~6 hours continuously after fully charged. Once the battery save mode is turned on, it could be working even longer than 10 hours.

User questions & answers

Question:	What is the warranty on this product
Answer:	Hello, we provide one-year warranty for this product. If there are any quality problems with the product, please contact our customer service team directly via Amazon email.Hope this helps.
Question:	So this cant be attached to the bottom of a pontoon?! Based on the description, Thats why we bought this. But after receiving, this is just a bobber
Answer:	Usually, the fish finder could be attached to the hull of the kayak directly, because there usually be a hole on the hull of kayak. However, if you can't attach the transducer to the bottom of your pontoon, please contact our customer service through amazon message, and we will help you out with your problem.
Question:	will this mount under a kayak from walmart
Answer:	Yes, this fish finder is suitable for kayaking fishing, you can fix the sonar transducer to the hull of the kayak or by LUCKY transducer arm mount.
Question:	I know this will pick up fish and bottom topographical image's. Will it show your bait so you know how far down you are
Answer:	Hi,this waterproof fish finder could detect your bait if your bait keep moving and the sensitivity of your fish finder be adjusted to full.

Product features

Advantages

• The display of the portable fishing finder is waterproof against rains or splashes. Even thought it was dropped in the water, the display will not be damaged.

Anti-corrosion Material

• The portable fish finder can be used either in freshwater or saltwater. You just need to dry it in open air after fishing,and it will prolong the life time of this fishing gadgets.

Anti-fish Bite Sonar Transducer

• We choose polymer plastics for the float instead of the foam. The surface of the sonar transducer is much more smooth, and it is difficult for the fish bite.

Ice Fishing

1. Clear the snow and put the sonar transducer on the smooth ice layer. Then the fish distribution under the ice layer could be displayed on the portable fish finder host.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the sonar transducer directly in the water and enjoy the ice fishing

Kayak Fishing

1. Fix the sonar transducer to the hull of the kayak or by LUCKY transducer arm mount.
2. Put the sonar sensor submerged completely in the water and you will get useful fishing data on your portable waterproof fish finder.

Boat Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fish finder transducer against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

Bank Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

Product description

Following in the success of the STRIKER fish finder series, Garmin is proud to announce the new STRIKER fish finders with ClearVü technology. These devices are designed to allow you to mark your favorite fishing spot and easily navigate back to it tomorrow, saving you time and money. STRIKER series fish finders are available in 3.5-, 5- and 7-inch display sizes.Display resolution:480 x 320 pixels

• The power of simple - offers a keyed interface with dedicated buttons. The device is easy to use and easy to install. Available in 3.5-, 5- and 7-inch display sizes.
• Waypoint map - use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks.
• Chirp sonar - chirp sends a continuous sweep of frequencies which provides a wider range of information. Chirp sonar is able to create crisper fish arches with better target separation.
• Built-in flasher - view your sonar data in the classic flasher format; Ideal for ice fishing or vertical jigging.

User questions & answers

Question:	does it come with the fish finder or is it just the bag and other items
Answer:	It comes with everything you need,the bag, the holder,the battery, the charger,the fish finder with gps tracking, and instructions
Question:	Will this unit show bait fish
Answer:	only if there is big schools
Question:	Planning on having this stricly portable from boat to boat, is it easily installed and removed? Or is drilling required
Answer:	I've take one with me up to Alaska for the last 8 years. Setup is about five minutes on the 14' Lunds we rent up there.After the first time, the transducer cable length is established so stuff it in the side pouch at the end of the day. The rest of the cable stays wrapped up on the hanger inside the portable unit.The unit is very stable and sits nicely on the bench in front of me, even in the bumps.I keep a Scotchbrite pad in another pouch on the unit. Scrub a spot on the transom before sticking the suction cup on.I keep some tiewraps in the side pouch. Use a tiewrap to tie off the transducer cable to something on the boat. The suction cup holds up to 20 mph... until it doesn't. Tiewrapping the cable to the boat keeps the transducer out of the prop.
Question:	What does the bundle come with? Battery? Tranduser for ice fishing
Answer:	STRIKER 4 Dual-beam transducer Tilt/swivel mount Portable bag Base/handle Suction cup mount Foam float Kayak In-hull Transducer Mount Power cable Rechargeable battery AC charger Documentation
Question:	Please i need a trasceduser cable replacement. How much will it cost me
Answer:	Usually we didn't sell the transducer alone. If you already bought fish finder from us before, please contact us through amazon message and we will give you the offer for the transducer alone.
Question:	It works in salt water
Answer:	Yes,this Lucky fish finder can work well in salt water. It is suitable for ocean、lakes and rivers. Hope this helps.
Question:	can you mount the transistor in side the kayak
Answer:	Usually people will fix the transducer on the hull of the kayak (the outside). Because the transducer can only be working when it touches the water.
Question:	Does it work well for ice fishing
Answer:	Yes it works well for ice fishing, although you must drop the transducer below the ice in order for it to read depth accurately. I also found that it has the potential to mis-detect large tube jigs as a fish, but I actually don’t mind that as it tells me how deep my bait is. I also use this with my kayak mounted with the bracket, so I get double duty. Battery life is fantastic even in below zero temps. I’ve been out with it on several outings below freezing and I’m still on the same set of batteries! I would recommend this product.
Question:	What's the RMS on these subs
Answer:	I think it’s 1200 but i am not sure. I have four of them running at 2ohms with a planet audio torq 5000.1 amp. One of the loudest trucks in town.

Product features

Function

• Well understand the water depth and fish location by the portable fish finder.
• The fish finder portable gives you alerts when fish and fish schools passing by.
• 5 modes sensitivity options enable you to use the kayak fish finder in different fishing environments.
• The kayak fish finder can be used in different ways, such as on ice, fixed to kayak, put it into a hole or float it on water surface.
• You can understand the composition of the bottom contour. Sands, rocks and weeks will be shown on the LCD display.

Specification

• 2inch TN/ANTI-UV LCD Display.
• Blue LED Back lighting.
• Measurement Unit: FT/M
• 1.81inch diameter transducer sensor.
• Detect Depth Range: 3ft~328.08ft (0.6m~100m) under sensor.
• Sensor coverage range: 45 degrees beam angle in 200Khz.
• Sensor Operating Temperature: 14°F to 122°F(-10°C-50°C) .
• Cable Length: 25ft (7.62m)
• Powered by: 4 x AAA batteries (not included)

For Kayak Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fishing sonar sensor against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

For Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the LUCKY fish finder portable directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the fishing sonar sensor directly in the water. Enjoy the fishing gear

For Shore Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

STRIKER 4 Portable Bundle

3.5-inch CHIRP Fishfinder with GPS and Portable Kit.

Navigate Easily with Waypoint Map

Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It’s also a great tool for finding your way back to the boat ramp.

Check Your Speed on Screen

You can quickly and easily see your boat’s speed on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are trolling at the right speed for the lure you’re using and for a particular fish species. It’s also a good way to tell if you are going the right speed in wake-controlled areas.

Take Your Fishfinder Anywhere

A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.

Experience the Clarity of CHIRP

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.

You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what’s below.

• Easy Setting: LUCKYLAKER underwater fishing camera is a small and portable underwater camera product. Compared with other underwater cameras products, despite its small size, it is very powerful. Real-time monitoring, video recording, photo taking, video playback, built in large capacity battery, visor design corresponding to direct sunlight, infrared light for night fishing and dark environments. All these features make the underwater camera a perfect fish finder product.
• For Extensive Fishing Experience: Although underwater fishing camera is small in size, it has a large 4.3 inch high resolution color screen and battery. Underwater fishing camera uses a sun visor design, which perfectly solves the problem that the screen cannot be seen clearly because of direct sunlight. And there is a 1 / 4-inch screw hole under the body, so you can fix it on a regular camera tripod for observation. And if you use the bracket in package, you can also fix it on a fishing rod.
• Portability and Battery Life: Unlike other similar products, the battery power of the underwater fishing camera is built into the device body, which makes the fishing fish finder camera more portable. The battery capacity is 4000mAh, which can last more than 5 hours when fully charged battery. The operating temperature is 14 ° F to 122 ° F, which means that it can be used as an ice fishing camera.
• Multiple Functions: The front section of the fish finder camera is equipped with 4 high-performance infrared lights, so even at night or when the water is very dark, you can clearly see the fish in the water. The tension of the camera cable is above 33lbs. If you use the accessories in the package, you can tie the bait to the front of the camera, so you can use the camera to fish, and you can observe the moment when the fish bites.
• Package and Warranty: Underwater fishing camera is suitable for various fishing methods. Ice fishing, night fishing, boat fishing,etc. It can also be used for aquaculture and pipeline inspection. Whether it is in the cold or warm water, fish finder camera performs with an equal level of efficiency and effectiveness. If you buy a fishing camera in our store, we will provide a 16GB TF card to help you record the fun moments of fishing. We offer a 1 year guarantee.

User questions & answers

Question:	Does camera have video out? So you can view on large tv
Answer:	The sensor itself responds to motion quickly, but you can create another delay in the program you write for the microcontroller board (Arduino or Raspberry Pi). After the sensor detects motion, capture the sensor signal by assigning a value to a variable, then delay when the signal is used by the program by using the 'delay()' function.

Product features

LUCKYLAKER underwater fishing camera

Compared with other fishing camera underwater products, the fish finder camera is lighter and smaller, and the total weight of the display, camera and cable is only 1lb. Other fish finder camera products can only be used to observe the situation in the water, while the fishing camera underwater can be used not only for real-time observation, but also for taking pictures, recording and playback. At the same time we provide a 16GB large-capacity TF card to help you record these interesting moments of fishing. It is quite difficult in choosing a best underwater camera for fishing, but we made it easier for you and so you will enjoy more the fishing experience you want to achieve!

High-Performance Camera

LUCKYLAKER fish finder camera is equipped with high performance infrared light. The minimum illumination is: 0.1LUX. If you are a night fishing enthusiast, then the performance of the fish finder camera definitely satisfy you. You will need fish finder camera to capture a clear image of what is underwater all about. And yes! This item is a perfect fit for your passion! There are three accessories in the package for connecting the camera and bait. You can use these accessories to tie the bait to the camera, so you can use the camera to fish and watch the moment when the fish bites the hook. This fishing camera will help your observation by depending on the footage of what is going on under the water surface.

Sun Visor Design

This fishing camera underwater uses a sun visor design to help you better solve the problem of being unable to see the screen because of direct sunlight. The maximum flip angle of the sun visor is 120 degrees. It has a simple design yet very effective when used.

Lightweight and Portable

Compared with other similar products, LUCKYLAKER

underwater fishing camera is lighter and smaller. The length, width, and height are 5inches, 3.6inches, and 1.2inches. Even better, the power battery supply for the fishing camera underwater is built into the device body. Other fish finder camera products are not only bulky, but also battery and display are separate. The battery of underwater fishing camera uses a large capacity 4000mAh lithium-ion battery, which can be used continuously for more than 5 hours when fully charged of battery.

Supports Multiple Languages

The LUCKYLAKER underwater fishing camera supports multiple languages. Russian, English, French, German, Italian, Spanish, Chinese, Japanese, Korean. That means, you will not have any problem choosing your preferred language!