12 best garmin portable fish finder

Product description

Following in the success of the STRIKER fish finder series, Garmin is proud to announce the new STRIKER fish finders with ClearVü technology. These devices are designed to allow you to mark your favorite fishing spot and easily navigate back to it tomorrow, saving you time and money. STRIKER series fish finders are available in 3.5-, 5- and 7-inch display sizes.Display resolution:480 x 320 pixels

• The power of simple - offers a keyed interface with dedicated buttons. The device is easy to use and easy to install. Available in 3.5-, 5- and 7-inch display sizes.
• Waypoint map - use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks.
• Chirp sonar - chirp sends a continuous sweep of frequencies which provides a wider range of information. Chirp sonar is able to create crisper fish arches with better target separation.
• Built-in flasher - view your sonar data in the classic flasher format; Ideal for ice fishing or vertical jigging.

User questions & answers

Question:	does it come with the fish finder or is it just the bag and other items
Answer:	It comes with everything you need,the bag, the holder,the battery, the charger,the fish finder with gps tracking, and instructions
Question:	Will this unit show bait fish
Answer:	only if there is big schools
Question:	Planning on having this stricly portable from boat to boat, is it easily installed and removed? Or is drilling required
Answer:	I've take one with me up to Alaska for the last 8 years. Setup is about five minutes on the 14' Lunds we rent up there.After the first time, the transducer cable length is established so stuff it in the side pouch at the end of the day. The rest of the cable stays wrapped up on the hanger inside the portable unit.The unit is very stable and sits nicely on the bench in front of me, even in the bumps.I keep a Scotchbrite pad in another pouch on the unit. Scrub a spot on the transom before sticking the suction cup on.I keep some tiewraps in the side pouch. Use a tiewrap to tie off the transducer cable to something on the boat. The suction cup holds up to 20 mph... until it doesn't. Tiewrapping the cable to the boat keeps the transducer out of the prop.
Question:	What does the bundle come with? Battery? Tranduser for ice fishing
Answer:	STRIKER 4 Dual-beam transducer Tilt/swivel mount Portable bag Base/handle Suction cup mount Foam float Kayak In-hull Transducer Mount Power cable Rechargeable battery AC charger Documentation
Question:	Please i need a trasceduser cable replacement. How much will it cost me
Answer:	Usually we didn't sell the transducer alone. If you already bought fish finder from us before, please contact us through amazon message and we will give you the offer for the transducer alone.
Question:	It works in salt water
Answer:	Yes,this Lucky fish finder can work well in salt water. It is suitable for ocean、lakes and rivers. Hope this helps.
Question:	can you mount the transistor in side the kayak
Answer:	Usually people will fix the transducer on the hull of the kayak (the outside). Because the transducer can only be working when it touches the water.
Question:	Does it work well for ice fishing
Answer:	Yes it works well for ice fishing, although you must drop the transducer below the ice in order for it to read depth accurately. I also found that it has the potential to mis-detect large tube jigs as a fish, but I actually don’t mind that as it tells me how deep my bait is. I also use this with my kayak mounted with the bracket, so I get double duty. Battery life is fantastic even in below zero temps. I’ve been out with it on several outings below freezing and I’m still on the same set of batteries! I would recommend this product.
Question:	What's the RMS on these subs
Answer:	I think it’s 1200 but i am not sure. I have four of them running at 2ohms with a planet audio torq 5000.1 amp. One of the loudest trucks in town.

Product features

Function

• Well understand the water depth and fish location by the portable fish finder.
• The fish finder portable gives you alerts when fish and fish schools passing by.
• 5 modes sensitivity options enable you to use the kayak fish finder in different fishing environments.
• The kayak fish finder can be used in different ways, such as on ice, fixed to kayak, put it into a hole or float it on water surface.
• You can understand the composition of the bottom contour. Sands, rocks and weeks will be shown on the LCD display.

Specification

• 2inch TN/ANTI-UV LCD Display.
• Blue LED Back lighting.
• Measurement Unit: FT/M
• 1.81inch diameter transducer sensor.
• Detect Depth Range: 3ft~328.08ft (0.6m~100m) under sensor.
• Sensor coverage range: 45 degrees beam angle in 200Khz.
• Sensor Operating Temperature: 14°F to 122°F(-10°C-50°C) .
• Cable Length: 25ft (7.62m)
• Powered by: 4 x AAA batteries (not included)

For Kayak Fishing

1. Attach the Side-Scan Adapter to the boat hull using the mounting tabs.
2. Break though the hull of a boat. Place the fishing sonar sensor against the hull bottom 1 inch underwater.
3. The moving speed of kayak should be below 5mph.

For Ice Fishing

1. You should clear the snow on the ice layer. Make sure the surface is smooth enough. Put the LUCKY fish finder portable directly on ice layer to detect fish distribution in purpose of selecting a place to drill a hole.
2. There should be no air between the sensor and the ice and no air between ice layer and the underwater either. Otherwise, the portable fish finder will not work properly.
3. Cut a hole through the ice and put the fishing sonar sensor directly in the water. Enjoy the fishing gear

For Shore Fishing

1. Fixed the removable float on the cable.
2. Cast the fishing sonar transducer into water as far as you can.
3. You can cast the fishing sonar transducer either by your hand or by the fishing rod.

STRIKER 4 Portable Bundle

3.5-inch CHIRP Fishfinder with GPS and Portable Kit.

Navigate Easily with Waypoint Map

Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It’s also a great tool for finding your way back to the boat ramp.

Check Your Speed on Screen

You can quickly and easily see your boat’s speed on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are trolling at the right speed for the lure you’re using and for a particular fish species. It’s also a good way to tell if you are going the right speed in wake-controlled areas.

Take Your Fishfinder Anywhere

A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.

Experience the Clarity of CHIRP

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.

You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what’s below.

Product description

Following in the success of the Striker fish finder series, Garmin is proud to announce the new Striker fish finders with ClearVu technology. These devices are designed to allow you to mark your favorite fishing spot and easily navigate back to it tomorrow, saving you time and money. Striker series fish finders are available in 3.5-, 5- and 7-inch display sizes. Display resolution: 480 x 320 pixels.

• Clear Vu scanning Sonar shows you more of what is in the water around your boat; This high frequency sonar gives near photographic images with detailed representations of objects, structure and fish
• The power of simple offers a keyed interface with dedicated buttons; The device is easy to use and easy to install; Available in 3.5, 5 and 7 inch display sizes; Water rating IPX7
• Waypoint map: Use the way point map to easily view, mark and navigate to locations such as brush piles, stumps and docks; Maximum depth 1,600 feet freshwater, 750 feet saltwater; Current draw at 12 volt: 0.23 Ampere
• Chirp Sonar sends a continuous sweep of frequencies which provides a wider range of information; Chirp Sonar is able to create crisper fish arches with better target separation
• Built in flasher: View your sonar data in the classic flasher format; Ideal for ice fishing or vertical jigging. Display size: 1.9 x 2.9 inches (4.9 x 7.3 centimeter); 3.5 inches diagonal (8.7 centimeter)

User questions & answers

Question:	Does this come with a transducer
Answer:	Yes mine came with a transducer. It came with everything needed to set up and be ready to go as if you never had a fish finder before. Although the two wire clamps to hold your cable for the transducer are fragile, I recommend getting new ones
Question:	Does this unit also give depth readings of the water
Answer:	Yes! Depth, temperature, speed you're moving, time of day etc. this is an awesome unit for the price
Question:	does the power source (12 volt i've read) come with the package, or do i need to purchase that
Answer:	Yes you can and I have done just that. You can get it all here on Amazon. There are plenty info doing just this on the internet. Just assemble these parts. Here is what I have. When done I have it mounted via Scotty #141 Kayak/SUP Transducer Mounting Arm with Gear-Head https://www.amazon.com/gp/product/B0174X6T5A/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Battery is https://www.amazon.com/gp/product/B006LO9XHA/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 The box it fits in is https://www.amazon.com/gp/product/B011ZB4NLO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Switch is https://www.amazon.com/gp/product/B011ZB4NLO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 Uxcell a12110200ux0689 Waterproof Connector Cable Gland is https://www.amazon.com/gp/product/B00AOBGQ26/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Question:	Does it has map of Middle East Kuwait
Answer:	yes but its top secret

Product features

STRIKER 4

3.5-inch CHIRP Fishfinder with GPS.

Navigate Easily with Waypoint Map

Since the STRIKER fishfinder series includes high-sensitivity GPS, you can see your position in relation to waypoints you have marked. Use the waypoint map to easily view, mark and navigate to locations such as brush piles, stumps and docks. It’s also a great tool for finding your way back to the boat ramp.

Check Your Speed on Screen

You can quickly and easily see your boat’s speed on the screen of your STRIKER fishfinder. It’s a great tool to make sure you are trolling at the right speed for the lure you’re using and for a particular fish species. It’s also a good way to tell if you are going the right speed in wake-controlled areas.

Take Your Fishfinder Anywhere

A portable kit is available to protect and carry your STRIKER fishfinder with GPS, so it’s perfect for kayak, canoe or ice fishing. It includes a sealed, rechargeable battery with charger, built-in transducer cable management and storage and suction cup transducer mount and float.

Experience the Clarity of CHIRP

STRIKER 4 fishfinder includes a Garmin CHIRP (77/200 kHz) transducer, which provides a visibly higher level of clarity and detail for fish and structure than traditional 77/200 kHz transducers.

Instead of sending just 1 single frequency, CHIRP sends a continuous sweep of frequencies, ranging from low to high, then interprets them individually upon their return. Since the frequencies provide a wider range of information, CHIRP sonar technology can create crisper fish arches with greater target separation.

You also can upgrade to high-performance Garmin CHIRP technology, which provides crystal-clear sonar images with even more remarkable target separation and resolution from shallow to deeper depths. For better fishing, bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths to provide a more timely interpretation of what’s below.

Product description

The STRIKER Plus 4 fishfinder with a bright 4.3” display and built-in GPS features CHIRP sonar for crystal-clear images and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.Display resolution: 272 X 480 pixels

• Includes dual-beam transducer with Garmin Chirp traditional sonar for crystal-clear images and remarkable target separation
• Built-in Garmin quickdraw contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, Sunlight-readable 4.3” display and intuitive user interface
• Rugged design for every fishing environment. Frequencies supported: Traditional: 50/77/83/200 kHz, Transmit power: 200 W (RMS)

User questions & answers

Question:	Does this Garmin fish finder comes installed with maps (Marine maps
Answer:	There is no way to put any maps on this unit but it does have storage to make your own maps. It has a mapping feature so you can map the depths of your favorite lake. The specs says it will hold 1 million acres of lake maps. Granted, you have to be on a boat and troll to do the mapping but it does work and it works rather well.
Question:	For in hull transducer mounts for a fiberglass boat, Garmin suggested putting the transducer in a container full of antifreeze. Any other methods
Answer:	I can’t speak to fiberglass as I use mine on kayak. However I do use my transducer shooting thru hull attached with duct seal that forms a reservoir around transducer and then I add water. That works perfectly! Duct seal is $3 at Lowe’s or Home Depot.
Question:	What's the difference between this and the "garmin striker 4 with transducer, 3.5" gps fishfinder with chirp traditional transducer
Answer:	This one has a feature where you can contour maps the bottom of any lake or river you're in.
Question:	how many holes do i need to drill to install the transducer
Answer:	Don't drill holes in your boat. Find an old 3/8-1/2" plastic cutting board and cut a 4x4 piece out of it and using 3m sticky tape mount it to the transom and use short screws to mount the transducer to the piece of cutting board. Did that back in 1979 and has never come loose.
Question:	Whats the maximun depth that it can read
Answer:	It’s in the description I believe. Otherwise YouTube has this information
Question:	Will this work in shallow waters? What is the minimum depth it will read accurately? Read a review where it was said to lose use under 10 feet
Answer:	I know from experience it can read depths as shallow as 1 foot but I don’t know the exact limitations or specs. The problem that renders this and any fish finder useless in shallow water is the amount of vegetation and its direct proximity. In shallow water with dense vegetation reaching the surface you’re most likely only going to see screen noise displayed which may effect the abilities to properly gauge water depths. If there is no vegetation and the ground is of solid structure then this will work fine in water 10’ or less.
Question:	Can the transducer be mounted on the trolling motor
Answer:	Yes it’s come with all the hardware needed to install you might have to change some things depending on your trolling motor
Question:	Will I be able to see the screen with polarized sunglasses
Answer:	Yes you can because I am using as well the polarized glasses with a light yellow tint

Product features

Garmin STRIKER Plus 4 With Dual-Beam Transducer

The STRIKER Plus 4 fishfinder with a bright 4.3” display and built-in GPS features CHIRP sonar for crystal-clear images and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

Garmin Quickdraw Contours: While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been.

CHIRP Sonar Clarity: The STRIKER Plus 4 fishfinder includes Garmin CHIRP technology for a higher level of clarity and detail that you have come to expect from Garmin. Crystal-clear sonar images provide remarkable target separation and resolution in shallow and deeper water. Bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths for a timely interpretation of what’s below.

Product description

See fish and structure in colorful detail with the STRIKER Vivid 7sv fishfinder. This easy-to-use 7” device now features high-contrast color palettes to make it easier to see what’s beneath the surface. It includes support for best-in-class Garmin CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars (requires compatible transducer). High sensitivity GPS lets you mark hot spots, plan routes and view your boat’s speed. Create and save maps with 1’ contours with built-in Quickdraw Contours software. Built-in Wi-Fi connectivity allows you to connect to the ActiveCaptain app with compatible smartphone to transfer waypoints, receive smart notifications and access the Garmin Quickdraw Community.

• easy-to-use 7” color fishfinder with new vivid scanning sonar color palettes to easily distinguish fish and structure
• supports garmin chirp traditional sonar plus chirp clearvü and chirp sidevü scanning sonars (requires compatible transducer)
• high-sensitivity gps to mark waypoints, create routes and view your boat’s speed
• includes built-in quickdraw contours mapping
• wi-fi connectivity allows you to connect to the activecaptain app with compatible smartphone to transfer waypoints, receive smart notifications (including software update notifications) and access the garmin quickdraw community
• Included components: STRIKER Vivid 7sv fishfinder; GT52HW-TM transducer; Power/data cable; 12-pin to dual 4-pin transducer adapter cable; Tilt/swivel mount; Hardware; Garmin bumper sticker; Documentation

User questions & answers

Question:	Does this work for ice fishing
Answer:	Yes. The transducer is a streamline design meant more to be mounted to a kayak or boat, but it can also be dropping down an ice hole. There is an ice fishing display view
Question:	Does it have touch screen? Can it be connected to MotorGuide xi3 trolling motor
Answer:	No touch screen
Question:	Does unit do side and down image with transducer that comes with it
Answer:	Yes, the side imaging is functional this type of side imaging shows you fish and large features but not Crystal clear images
Question:	What transducer comes with vivid 5cv
Answer:	It came with the 7sv
Question:	i will be installing these in my Toyota scion TC do i need to install these little cross over things or can i rock with out them please help
Answer:	The crossover separates the highs and lows. You can install with out it but it won't sound very good and probably blow the tweeters quickly....and unrelated to your question. I bought these and the Renegade RX6.2C for about the same price. But the Pyle tweeters blew writhing 2 weeks. ( I am running a amplified system) but I'm only pushing about 35-40 watts rms per door. The renegade are still in and working fine. However the Pyle sounded lounder for a while. But ended up dying...
Question:	I might pair these with boss ch6530 chaos series 6.5-inch 3-way speakers. which ones should i put in the front door
Answer:	these will go great in the front door they come with a speaker cover that goes over the dome face, i installed mine without it for aesthetic purposes.
Question:	it states free shipping yet the item was $35.54..yet my total was $44.96 ????? where did the $9.42 go to
Answer:	You have to be careful. I made the same mistake a few years ago on another item. The "FREE SHIPPING" is only if you spend at least $49. You need to add on another item worth $14 or more to get the "FREE SHIPPING".
Question:	will they fit in a Harley davidson sattle bag
Answer:	Absolutely. They're rather slim and 6.5 in wide. The tweeter is separate though.

Product features

2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Steel Basket

Get in gear with the Pyle Gear series These speakers are designed to provide the quality sound for the budget-minded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' mid-bass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware - it's a perfect way to upgrade and expand the range of your factory system. The 100-watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the mid-bass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.

CLEAR, COLORFUL SONAR

Choose from 7 new vivid color options to see fish and structure in maximum contrast and clarity on your 7” fishfinder.

BUILT-IN SONAR

Use the included GT52 transducer to get Garmin CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars.

WAYPOINT MARKING

To catch more fish, you need to know where the fish are biting. Use waypoint marking for hot spots so you can easily find your way back.

HIGH-SENSITIVITY GPS

Plan and create routes and view your boat’s speed on your fishfinder using high-sensitivity GPS.

QUICKDRAW CONTOURS

Nobody knows the waters you fish better than you. With the STRIKER Vivid 7sv fishfinder, you can store up to 2 million acres of maps with 1’ contours.

INCLUDED HARDWARE

The STRIKER Vivid 7sv fishfinder includes a tilt/swivel mount plus transom and trolling motor mounting hardware and cable.

Product description

The STRIKER Plus 4cv fishfinder with a bright 4.3” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built-in Garmin quickdraw contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, Sunlight-readable 4.3” display and intuitive user interface
• Rugged design for every fishing environment

User questions & answers

Question:	Whats the maximun depth that it can read
Answer:	Hi Steve, Because of the number of variables encountered with different makes and models of automobiles, Sony is unable to assist with the installation of car stereo and mobile audio systems. However, if you are using a wiring harness, further information about the wire color and function of each pin on the wiring harness is available. -Sam
Question:	Will this work in shallow waters? What is the minimum depth it will read accurately? Read a review where it was said to lose use under 10 feet
Answer:	Hi MarcL, we do not show them as a fit. Sorry. I recommend you use the online fit guide on our site to find more helpful information. Hope that's helpful, Don
Question:	Can the transducer be mounted on the trolling motor
Answer:	Hola Renee, Debido a la cantidad de variables que se encuentran con diferentes marcas y modelos de automóviles, Sony no puede asistir con la instalación de sistemas de audio para automóviles. Sin embargo, si está utilizando un mazo de cables, puede encontrar más información sobre el color del cable y la función de cada pin en este enlace: https://www.sony.com/electronics/support/mobile-cd-players- digital-media-players-dsx-series / dsx-a415bt / articles / 00028631. Recomendamos contactar a un instalador profesional para determinar su compatibilidad y operación. ¡Gracias! – Romeo
Question:	Will I be able to see the screen with polarized sunglasses
Answer:	Thank you for your question. The sensitivity is 87dB at 12V. Happy to help! - Creative Audio

Product description

The STRIKER Plus 4cv fishfinder with a bright 4.3” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

• Includes transducer for built in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built in Garmin Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built in GPS lets you mark waypoints, create routes and view boat’s speed
• Bright, sunlight readable 4.3” display and intuitive user interface
• Rugged design for every fishing environment.Transmit power:300 W (RMS)

User questions & answers

Question:	Does the 4cv have a memory card slot for storing data? The specifications on Garmin state it can map up to 2 million acres with 1' contours
Answer:	No, not that I know of anyway.
Question:	do they offer and transducer extender cable
Answer:	https://buy.garmin.com/en-US/US/p/pn/010-11617-10
Question:	Does it have gps to find way back to dock
Answer:	The unit employs tracks. Meaning if you selected in the menu option it will track your progress throughout the day.so if you merely follow your track back to your origin it will take you back to the dock. You can also create waypoints that you can navigate to. So if you created a waypoint and named it dock you could simply use the unit to make your way back to the dock .
Question:	Why do people complain about the lack of instructions when there is a user manual on this page labeled "user manual" under product description
Answer:	User manual is online and easy to print. Also its pretty easy to figure out how to use it. If I can figure it out , anyone can. Today's smartphones are harder to figure out. Also, YouTube is very helpful.

Product features

Garmin Striker Plus 4Cv

The Striker Plus 4cv fish finder includes Garmin CHIRP technology combined with Garmin ClearVü scanning sonar for a nearly photographic, wide image of what passes below your boat. You clearly see structure, submerged objects and fish. Paired with Garmin CHIRP traditional sonar for remarkable target separation, this transducer will help you catch more fish.

The Striker Plus 4cv fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.

Product description

This Ice fishing kit comes complete with a rugged, glove-friendly carrying bag to protect your device, a gt8hw-if high wide CHIRP Ice fishing transducer for Garmin CHIRP traditional sonar Plus foam float, grommet, battery, charger, power cable and Built-in cable management and storage.

• Rugged, glove-friendly case carries and protects your 4”, 5”, 6” or 7” striker fishfinder, echomap Chirp or echomap Plus combo
• Gt8hw-if ice fishing transducer Features Garmin high wide Chirp traditional sonar with selectable beamwidth (16 to 24 degrees)
• Comes with foam Float, grommet, battery, charger, power cable and built-in cable management and storage

User questions & answers

Question:	Garmin 010-12462-00 portable fishing kit, what all comes with it? i already own the striker
Answer:	yes
Question:	Will the Garmin Striker 4 Plus work with all parts of this kit
Answer:	pair
Question:	How long does the batter last
Answer:	As I stated in my review of the product, the best tool to use to make the cutouts is a 5" hole saw. This will make a clean hole for mounting and is much faster, easier, and more professional than using the speaker templates to mark and cut a hole with a jig saw. As always, measure twice, cut once!! Especially on a boat!NOTE: The other answer given on this topic (supposedly by "Sony Support USA") is INCORRECT! The OUTSIDE speaker diameter is 6.5"; the cutout is not nearly that large!! The speaker has a flange that rests against the mounting surface with a water resistant gasket and is then secured to the surface with screws. The OUTSIDE diameter of the flange is close to 6.5", the INSIDE diameter of the flange (~ 5") is the size the hole needs to be.
Question:	Does this have everything i need for ice fishing, if i already have a garmin 73sv
Answer:	These are the direct replacements for the XSMP1610.

Product features

Garmin Small Ice Fishing Kit, 010-12462-10

• Rugged, glove-friendly case carries and protects your 4”, 5”, 6” or 7” Striker fishfinder, echomap Chirp or echomap Plus combo
• GT8HW-IF ice fishing transducer features Garmin high wide Chirp traditional sonar with selectable beamwidth (16 to 24 degrees)
• Comes with foam float, grommet, battery, charger, power cable and built-in cable management and storage

This winter, go ice fishing with your 4”, 5”, 6” or 7” Striker fishfinder, echomap Chirp or echomap Plus combo. This ice fishing kit comes complete with a rugged, glove-friendly carrying bag to protect your device, a GT8HW-IF high wide Chirp ice fishing transducer for Garmin Chirp traditional sonar plus foam float, grommet, battery, charger, power cable and built-in cable management Chirpstorage.

In the box contents: GT8HW-IF transducer, Power cable, Bag with handle, Foam float, Cable grommet, Rechargeable battery, Battery charger.

Product description

The striker Plus 5cv Fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP Clearly scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat's speed.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
• Built-in Garmin Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed. Frequencies supported : Traditional: 50/77/200 kHz
• Bright, sunlight-readable 5” display and intuitive user interface
• Rugged design for every fishing environment. Display resolution: 800 x 480 pixels

User questions & answers

Question:	How long is the cord from the transducer to the unit itself
Answer:	On my Sun TRACKER 16 foot easily reaches from the battery to the display. Transponder on the front reaches to the counsel.
Question:	Does this gps have a chip slot
Answer:	No again you need too buy a different model....
Question:	Will this work on a Kayak, will the transducer fit through the scupper holds
Answer:	You only need to run the transducer wire and plug up through your scupper hole to and plug it into the back of the unit. No need to fit transducer through scupper.
Question:	Con que accesorios viene este gps
Answer:	transductor y kit de instalacion

Product features

Garmin Striker Plus 5cv with Transducer, 5" GPS Fishfinder

The STRIKER Plus 5cv fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.

Garmin Quickdraw Contours

Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required.

Product description

The striker Plus 7sv Fishfinder with a bright 7” display and built-in GPS features Garmin Quickdraw contours map drawing software, which stores up to 2 million acres of content with 1’ contours. Garmin CHIRP traditional sonar provides crystal-clear images with remarkable target separation. Get nearly photographic images of what passes below and beside your boat with CHIRP Clearly and CHIRP SideVü scanning sonars. Use Built-in Wi-Fi to pair with the ActiveCaptain app for smart notifications, access to Quickdraw Contours community data and more.

• Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars
• Built-in Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres. Resolution : 800 x 480
• Built-in Wi-Fi for access to ActiveCaptain app so you can receive smart notifications, access Quickdraw Contours Community and transfer waypoints and software update notifications
• Built-in GPS lets you mark waypoints, create routes and view boat’s speed. Transmit power - 500 W (RMS)
• Bright, sunlight-readable 7” display and intuitive user interface

User questions & answers

Question:	Is it sensitive enought to see your line / jig/ lure
Answer:	Most of the time yes depending on if directly below and high sensitivity
Question:	Is this unit networkable
Answer:	It will network with your smart device via wifi.
Question:	The photos show both a blue and yellowish backlights on the down and sidescan. Is that configurable
Answer:	Yes you can change it
Question:	does it come with gps maps
Answer:	It does not come with GPS maps, or have the ability to add GPS maps via a SDcard. You can mark waypoints and tracks, but no traditional GPS mapping like with lake cards. It does however, have Quickdraw Contours with the Striker Plus version. What this does is create its own map showing contour lines like a topo map.

Product features

Clear Scanning Sonar Images

Garmin ClearVü scanning sonar gives you a nearly photographic, wide image of what passes below your boat. Garmin SideVü scanning sonar gives you a crisp, clear view of what lies off to each side of your boat. You clearly see structure, submerged objects and fish. Garmin CHIRP traditional sonar provides remarkable target separation. All this sonar technology is combined into 1 transducer to help you catch more fish.

GPS Fishfinder

The built-in, high-sensitivity GPS finds and maintains your position anywhere you go on the water. The GPS allows you to mark waypoints for different locations. So, if the fish are biting in 1 spot, you can mark it, and return to it on your next trip. Mark docks, boat ramps and other locations on the lake, and create routes back to them for your next trip. GPS also allows STRIKER Plus 7sv to show your speed on screen, so you can be sure you’re trolling at the right speed for the lure you’re using or in wake-controlled areas.

Built for You

The STRIKER Plus 7sv fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.

Product description

Take your compatible ECHOMAP CHIRP anywhere on the ice with this rugged, portable fishing kit. The GT10HN-IF ice fishing transducer features Garmin CHIRP traditional sonar with narrow, 8-16 degree beam angle for crisp, clear images and excellent target separation. The included carrying bag protects and carries your device and accessories while the built-in cable management and storage means you can easily take it anywhere on the ice.

• Take your compatible ECHOMAP CHIRP anywhere on the ice with this rugged, portable fishing kit
• GT10HN-IF ice fishing transducer features Garmin CHIRP traditional sonar with narrow, 8-16 degree beam angle for crisp, clear images and excellent target separation
• Included carrying bag protects and carries your device and accessories
• Built-in cable management and storage means you can easily take it anywhere on the ice
• Kit Includes: GT10HN-IF transducer, battery, charger, power cable (8-pin to 4-pin transducer adapter cable), foam float, and cable grommet

User questions & answers

Question:	Work on a 5cv
Answer:	It will absolutely make a huge difference without a sub woofer. I have these in my Jeep Grand Cherokee rear doors and they have very little bass. Clear sound for the price and I would buy them again but very little low end.
Question:	I have a 73 SV is this compatible
Answer:	Mine did not come with grills. The boxes they came in (I ordered 4 speakers) do not show the grills as being included either. Yet the description on here states that grills are included.
Question:	Is this kit compatible with the 93sv plus
Answer:	These come with a set of wires with spade terminals on them. The end of the wires are tinned and setup to be installed directly to an amp.or soldered to an existing wire. If you don't want to cut factory wiring a harness adapter or quick splice will be needed.
Question:	What size battery comes with the kit
Answer:	I'm not sure but I'm sure they will fit. If they screw holes are off you can always make new ones

Product description

Drill fewer holes and catch more fish with the Panoptix ice fishing bundle. It includes an ECHOMAP UHD 73cv touchscreen combo with keyed assist and three types of sonar: narrow beam Garmin CHIRP traditional, Panoptix LiveVü Forward and LiveVü Down. The bundle includes a swivel pole mount for the Panoptix transducer, 12Ah battery with charger, power cable, grommet and foam float — all in a convenient, glove-friendly portable bag that makes it easy to go from ice to open water. LiveVü Forward sonar shows up to 100’ all around you and below the ice so you can locate schools of fish and know where to drill the next hole. LiveVü Down sonar shows moving sonar images of what is below the ice so you can watch fish respond to your jig. Garmin CHIRP traditional sonar provides crystal-clear images with remarkable target separation and jig detection. Preloaded LakeVü g3 maps provide exceptional detail on more than 18,000 lakes. Create custom combination pages to include flasher, map and Panoptix views.

• Includes an ECHOMAP UHD 73cv touchscreen combo with keyed assist and three types of sonar: narrow beam Garmin CHIRP traditional, Panoptix LiveVü Forward and LiveVü Down
• Includes Panoptix PS22-TR transducer
• Preloaded LakeVü g3 maps provide exceptional detail on more than 18,000 lakes
• Ability to create custom combination screen to include flasher, map and Panoptix views
• Rugged, portable carrying case fits all included parts and is perfect for ice fishing

Product features

ECHOMAP UHD

Use the 7” ECHOMAP UHD 73cv touchscreen combo with keyed assist for three types of sonar, and go from ice to open water.

PANOPTIX TRANSDUCER

See what’s below the surface with the included Panoptix PS22-TR transducer. Use the swivel pole mount to change your angle.

LIVEVÜ FORWARD

LiveVü Forward sonar shows up to 100’ all around you and below the ice, so you can locate schools of fish and know where to drill the next hole.

LIVEVÜ DOWN

LiveVü Down sonar shows moving sonar images of what is below the ice, so you can watch fish respond to your jig.

GARMIN CHIRP SONAR

Garmin CHIRP traditional sonar provides crystal-clear images with remarkable target separation and jig detection.

LAKEVÜ G3 MAPS

The unit comes preloaded with LakeVü g3 maps with integrated Navionics data, covering more than 18,000 lakes in the U.S.

BUILT-IN FLASHER

The built-in flasher provides accurate jig and fish detection as they swim into the sonar beam.

CUSTOM COMBOS

You can create custom pages that combine sonar, flasher and map on your display.

CARRYING CASE

Where you take your bundle is up to you. But the rugged, portable carrying case lets you easily transport it from hole to hole and season to season.

Product description

Garmin Fishfinder ECHOMAP Plus 43cv, US LakeVu g3, w/GT20 xdcr, 010-01885-05

• EchoMap+ 43cv, US LakeVu g3, GT20 Xdcr

User questions & answers

Question:	What are the differences between the 43cv and 44cv
Answer:	Sorry for the delay. I replaced my 1994 Chevy cavalier factory speakers with these speakers and a dual audio receiver. These are good all-around speakers. I have my bass set on level 4 out of 7. The speakers meet my needs and I am pleased with them.
Question:	Not clear about the maps will it show the inland waterway up and down the east coast of Florida
Answer:	Hi S, Luna, this unit supports 4 ohms of impedance. - Jerome
Question:	Can you also get the included maps on your phone
Answer:	It's a pair. I installed them in My 2010 Xterra. A huge improvement!
Question:	Will it show texas gulf coast bay system
Answer:	Not a direct fit unless you do some minor modifications. Your jeep liberty uses a 5 1/4 speaker.