8 best power acoustik car subwoofers

Power Acoustik is a well-known brand in the car audio industry, particularly for its car subwoofers. Here is some information about Power Acoustik car subwoofers:

  1. Brand Overview: Power Acoustik is a manufacturer of car audio and mobile electronics products. They produce a range of car audio components, including amplifiers, speakers, and subwoofers.

  2. Subwoofer Types: Power Acoustik offers a variety of car subwoofers to suit different audio preferences and vehicle setups.They produce both component subwoofers (subwoofers sold individually) and subwoofer enclosures (subwoofers pre-installed in a sealed or ported enclosure).

  3. Size Options: Power Acoustik car subwoofers come in various sizes, commonly ranging from 8 inches to 15 inches in diameter. The choice of size depends on the available space in the vehicle and the desired level of bass output.

  4. Power Handling: These subwoofers are designed to handle different levels of power, often specified in terms of RMS (Root Mean Square) and peak power. Higher power handling capability allows for louder and cleaner bass reproduction.

  5. Voice Coils: Power Acoustik subwoofers may feature single or dual voice coils. Dual voice coil subwoofers offer flexibility in wiring configurations and can be wired for different impedance loads.

  6. Cone Material: The cones of Power Acoustik subwoofers are typically constructed from materials like polypropylene, which are known for their durability and ability to reproduce deep bass tones.

  7. Enclosure Type: Power Acoustik offers subwoofers designed for both sealed and ported enclosures. Sealed enclosures provide tight and accurate bass, while ported enclosures often deliver louder bass with added low-end extension.

  8. Sensitivity: Subwoofers from Power Acoustik may have different sensitivity ratings. Higher sensitivity means the subwoofer can produce more sound with less power input.

  9. Frequency Response: These subwoofers are designed to reproduce specific frequency ranges, typically in the lower bass spectrum. The frequency response may vary depending on the specific model.

  10. Installation: Proper installation is crucial to get the best performance from Power Acoustik car subwoofers. This includes selecting the right enclosure type, wiring configuration, and amplifier to match the subwoofer's specifications.

  11. Compatibility: Power Acoustik subwoofers are compatible with a wide range of car audio systems and can be integrated into both factory and aftermarket setups.

  12. Warranty: Power Acoustik typically offers warranties on their products, which can vary by model and region. It's essential to check the warranty terms when purchasing.

Power Acoustik car subwoofers are popular among car audio enthusiasts due to their range of options, power handling capabilities, and value for money. When choosing a Power Acoustik subwoofer, it's essential to consider factors such as your vehicle's available space, desired bass output, and overall audio system configuration to ensure the best performance.

Below you can find our editor's choice of the best power acoustik car subwoofers on the market
  

Power Acoustik BAMF-122 Bumper-122 Car Audio Subwoofer 3500 Watts with 12-Inch Dual Suspension (2 Pack)

Based on 2 reviews Check latest price

Product description

Make your car audio sound the best it can be with the Power Acoustik BAMF-122 Bumper-122 Subwoofer 3500 Watts with 12" Dual Suspension. This package includes 2 subwoofers. BAMF subwoofers are the newest secret weapon for you bass BURP fanatics. These beasts are engineered for the most extreme conditions. Massive 3” 4-layer voice coils built on an aluminum former can take the heat. Freakishly oversized motor structures provide more magnetic inertia than is ever necessary for a woofer. Spruce tree pulp cones, high density extended excursion foam surround, and hybrid suspension dampers work together to contain the momentum to a shattering roar. All in all, this powerful subwoofer is the only thing standing between you and a fantastic sounding ride. Take your ride to the next level with the Power Acoustik BAMF-122 Bumper-122 Subwoofer 3500 Watts with 12" Dual Suspension.

  • POWERFUL SUBWOOFER: 3500-watt subwoofer with an overcompensating motor structure for increased magnetic strength; Includes 2 subwoofers
  • LOW FREQUENCY: 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics
  • NO MORE HEAT BUILD-UP: Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up
  • DURABLE FRAME: Non-Magnetic Non-Resonate Die-Cast Aluminum Frame
  • BIG-TIME SOUND: 3” 4-Layer Voice Coil w/ Direct Connect Wire Increases Power Handling

Power Acoustik MOFO-154X MOFO 15-Inch Dual 4-Ohm VC 3000 Watt Pro Subwoofer, Standard Packaging

Power Acoustik

Based on 142 reviews Check latest price

Product description

New MOFO woofers have a composite sandwich poly/paper cone that includes a dustcap with aluminum stiffeners. This eliminates cone flex and eliminates cone flex during low bass and high excursion. This new dustcap also cools the high efficiency voice coil! Cast aluminum basket and increased bottom octave output, this woofer is louder in all the right places!

  • 2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink
  • Non-Pressed Pulp Cone, Polyether Foam Surround
  • Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece

User questions & answers

Question: would 2 mofo 12s sound better than 2 mofo 15s ?? in a chevy lumina
Answer: It should but you may need a dash kit, specific to your vehicle to fit a double so unit
Question: Can I use my Kicker Zx1500.1 on this sub
Answer: For the Craplay feature using an iphone, you will not have to connect to the bluetooth for audio. As long as you are connected via usb. For the Android MHL feature, you must be connected to bluetooth for audio.
Question: Is it one or to subs
Answer: Works in all cars as long as your get the radio mount for your car
Question: How many oz's is the magnet
Answer: That's a very vague question, but google your car and if it's capable of double din radios, Radios have general sizes ( single and double din). That should answer your question.

Power Acoustik RZR1-2500D class D mono block subwoofer Amplifier

Power Acoustik

Based on 21 reviews Check latest price

Product description

Power Acoustik RZR1-2500D 2,500W Max Class D Monoblock Car Stereo Amplifier

User questions & answers

Question: Is it 1 ohm stable
Answer: Yes
Question: Will this work for 2 1200 watt subs so 2400 wats total at 1200 rms or too little power
Answer: This amp is only 900rms so it really wont do but 500 to 700 watts rms it will not give you the full watts no it wont work
Question: How many channels is this
Answer: Mono block
Question: What size fuses on the amp itself
Answer: 40 amp

Power Acoustik MOFO-104X 10" Dual 4 Ω 1200W RMS Subwoofer

Power Acoustik

Based on 20 reviews Check latest price

Product description

MOFO X subwoofers are refined and increase efficiency dramatically! MOFO-X subs use a composite sandwich cone with a polypropylene surface for durability and Spruce pulp backing for smooth low bass. Like the original MOFOs, the new models still use an aluminum dust cap that couples to the voice coil former and extends over the cone. Why? The fins brace the cone and eliminate cone flex during high excursion. And since they are aluminum and couple to the voice coil, they act as a heatsink or heat extractor. Using the latest materials, the new MOFO subs yield superior performance. Cast aluminum baskets? Of course! Increased bottom octave output? You Bet! Louder than the original design? Duh.

  • Overcompensating Motor Structure for Increased Magnetic Strength
  • 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics
  • Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up

User questions & answers

Question: would these babies hit hard with a 3000 watt planet audio mono block amp
Answer: Yes and it fits neatly BTW the fridge and stove bc it's so narrow
Question: Good amp to push this sub
Answer: Yes, the shelves can be placed at different heights. It is wherever you place the clips is where the shelf will stay.
Question: Q: I have a 1200 watt amp would it work with it
Answer: The bottom shelf is large enough for a 12x12” paper. The two top shelves are a bit smaller.
Question: Can this be wired to be wired down to two ohms
Answer: It comes with white and black. Yes measurements include wheels
Question: What’s the best box to get for 2 power acoustik bamf
Answer: Yes, just be mindful of how hot the stove gets and what's in the bins
Question: what happens if i just wire one voice coil
Answer: No, currently we only have this item in black.
Question: Will this work in a vented box with 2.3 cubic feet of volume
Answer: The distance between the baskets can be changed so that you can use them for small and large items.
Question: Dual 2ohm or dual 4 ohm voice coils
Answer: I was missing peices and the manufacturer offered to send me a full refund.
Question: How big is it
Answer: Here are the 3 shelves inner dimensions: 375*295*85mm 380*300*85mm 385*305*85mm Please use this as a reference.
Question: Titanic RC model do you ship to Australia
Answer: go to the sellers page and tell them.... I had no problem w/ my order, and I love the little roll around shelves My box came damaged but shelf but nothing was broke. tell them you NEED the rest of the parts before you leave a comment/rating.... other wise take a leg part with you and look at homedepot, or.....
Question: Is there anyway for me to order another rc controller I can't seem to find mines
Answer: That might have been a discounted price for prime members. I'm not sure because it has been a while since I have had mine. I'm just guessing.
Question: I have a frozen starboad shaft, need help on how you open up deck from hull
Answer: approximately 10 inches between, including a 2 inch lip

Power Acoustik RZ1-2300D 2300W Class D Monoblock Amplifier,Black

Power Acoustik

Based on 198 reviews Check latest price

Product description

Small Compact 4.75″ wide chassis. 2 ohm stable class d monoblocks. Mosfet pwm power supply. 50-250Hz variable 12Db LP Crossover. 10-50Hz variable 12Db subsonic Crossover.

  • 2300-Watt max power, 900-Watt RMS at 4-ohm, 1400-Watt RMS at 2-ohm
  • 2 ohm stable class D Monoblocks
  • MOSFET PWM power supply

User questions & answers

Question: Can this amp push a kicker l
Answer: It is 2 or 4ohm stable so your sub can be both. Depends on your VCs, load rating etc. But Kickers are nothing special so yes, no problem.
Question: Is this a one channel or
Answer: I used this amp for a while. It is still sitting in my garage. It is a one channel.
Question: would this amp push a 2 ohm apline type r 15 which has a 750 watt rms
Answer: Yes it will
Question: What's the difference in a class D and a A/B amp
Answer: From my experiences and what I heard class D amps don't heat up as much for instance this amp barely heats up my old class A/B would heat up and shut off alot where as this one has not done it once.

Power Acoustik MOFO-152X 15" 3000 Watt / 1400w RMS Car Subwoofer Sub MOFO152X

Power Acoustik

Based on 149 reviews Check latest price

Product description

Power Acoustik MOFO-152X 15" 3000 Watt / 1400w RMS Car Subwoofer Sub MOFO152X

  • 15" Mofo X series 3,000 watt subwoofer . 1,400 watts RMS Rated . Size of each subwoofer: 15". Fs :29.999 . Qms :5.425. Vas :3.264. Xmax mm : 14.
  • Xmech mm :21. Qes :0.585. Re : 3.80. Znom :4. BL : 18.407. RMS Power :1400. Qts :0.528. SPL :87.382. V.C. ; Motor Volume :373 Ounces
  • Size (in.) : 3.0 . V.C. Imp :DVC 2 . Cut-out : 13.90 . Depth : 7.8 . Sealed :2.00 . F3 Hz :43.33 . Ported :3.00 . Port :4x12.
  • Tune Freq. (Hz) :36.42 . F3 Hz :37.44 . ~Cloth/Paper Composite Cone . Blue Cast Aluminum Basket w/ Diamond Cut Accents . Chrome Back Plate.
  • UV Coated Foam Surround . One Piece Rubber Gasket w/ Color Matched Inserts . Dual CONEX Spiders . Nickel Plated 8 ga. Compression Wire Terminal.
  • With Aluminum Reinforcement Fins With Aluminum Dust Cap
  • 15-inch competition woofer with patent pending heatsink

User questions & answers

Question: Can this be used as a free sub
Answer: I have no idea, but don’t waste your money on this. Mine quite within 3 weeks. It was a battle with the manufacturer with the warranty. They never helped.
Question: I plan on buying 2 15" and I'm wondering what amp should I buy with them? 2500 watt or 3000 watt... Says it's max peak power on the subs is
Answer: no idea. BUT do not waste your money, it is a piece of garbage
Question: Will acoustik bamf5500 power 2 of these
Answer: Yes. It has a video input for a back-up camera.
Question: Would 1 of these have a lot of bass or do you need
Answer: The whole unit
Question: What’s the best box to get for 2 power acoustik bamf
Answer: No.
Question: what happens if i just wire one voice coil
Answer: No.
Question: Will this work in a vented box with 2.3 cubic feet of volume
Answer: Do not buy it!!!
Question: Dual 2ohm or dual 4 ohm voice coils
Answer: Yes
Question: Will this sub fit in a dodge fox box mounting depth is no more than 7 inches
Answer: We could only find 50watts per channel we couldn’t find RMS information. If you are running factory speakers it sounds great just like any other stereo. If I had to guess i would say it would run20/25 RMS
Question: What is the Best box for this subwoofer single bamf
Answer: Yes
Question: Whats better mofos or the bamf
Answer: I'm not sure...
Question: What is the mounting depth
Answer: It does not and I would not buy it

Power Acoustik RZ1-1500D 1500W Class D Monoblock Amplifier, Black

Power Acoustik

Based on 179 reviews Check latest price

Product description

Small Compact 4.75″ wide chassis. 2-Ohm stable class d monoblocks. Mosfet pwm power supply. 50-250Hz variable 12Db LP Crossover. 10-50Hz variable 12Db subsonic Crossover. High Level Input.

  • 1500-Watt max power, 600-Watt RMS at 4-ohm, 900-Watt RMS at 2-ohm
  • 2-Ohm stable class D Monoblocks
  • MOSFET PWM power supply

User questions & answers

Question: Will this amp take 4 gauge wire
Answer: Yea. This lil thing has power
Question: Do you need a capacitor using this amp with one sub
Answer: This amp with a single sub, you should not need a capacitor.
Question: Is this 1ohm Capable
Answer: No. The RZ1-3500D is 1-Ohm stable
Question: Will this amp sound better than my JL 500 slash amp on my w7 series
Answer: NO. If you read my review below, it puts out less than 300 watts RMS. This amp Is a scam, I don't know how Amazon even allows it to be sold.

Power Acoustik 12" Woofer Dual 4 Ohm 2500W Max

Power Acoustik

Based on 5 reviews Check latest price

Product description

2500 Watts Max

1200 Watts RMS

4 Ohm Dual VC

254 oz. magnet

Efficiency (1w/1m): 86.5

Optimum sealed: 1.25 cu. ft.

Optimum ported: 2.50 cu. ft.

Mounting depth: 7-1/2"e;



Formed steel framework basket

Overcompensating Motor Sturcture for Increased Magnetic Strength

10 mm T-Yoke & Top Plate Improve Low Frequency Dynamics

Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up

Dust Cap Absorbs Voice Coil Heat

Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone

2.5"e; 4-Layer Voice Coil w/ Large Gauge Wire Increases Power

High-Temperature Tollerance Adhesives Resist Thermal Failure

Nickel Plated 8ga Spring-Loaed Compression Wire Terminals

Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection

High Density Polyether Foam Surround w/ UV & Chemical Protection

Dual Poly-Cotton Suspension Dampen Violent Accelerations

Stitched Voice Coil Leads Prevent Potential Damage

1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included

  • Sold as 1 Each.
  • 12". 2,500W max. 1,200W RMS. Dual 4 ohm.
  • Overcompensating motor structure for increased magnetic strength. 10mm T-yoke & top plate improve low frequency dynamics. Vented T-yoke & frame reduces voice coil heat buildup. Die-cast aluminum heat sink dust cap absorbs voice coil heat.
  • Aluminum dust cap fins dissipate heat & strengthen cone. 2.5" 4-layer voice coil with large-gauge wire increases power. High-temperature-tolerance adhesives resist thermal failure.
  • Nickel-plated 8-gauge spring-loaded compression wire terminals. Nontransfer spruce pulp cone with UV & chemical protection. High-density polyether foam surround with UV & chemical protection.

User questions & answers

Question: Are these sold as pairs
Answer: Yes we ship to Australia.

Latest Reviews

View all