7 best rated 10 subwoofer

• Features: Rockville W10K5S2 K5 Series 10" 2-Ohm Car Subwoofer, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire, 40 Oz High Quality Magnet, Cast Iron Basket With Black Sanded Finish
• Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it, Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion, Blue Stitching Cone Reinforcement Ensures Long Life, Paper Dust cap is light weight and efficient helping the sub to play louder even if your amp is not so powerful
• Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire, Impedance: Single 2-Ohm Voice Coils, Vented Hole on T-yoke Enhances Heat Dissipation, Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet, Mounting Gasket with Rockville branding looks great and Makes it Easy To Mount the Subwoofer Air-Tight, High BL Magnetic Motor Gap
• We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated, Cutout Diameter: 9.05 inches, Mounting Depth: 4.52 inches, Frequency Response: 28 Hz - 1.3K kHz, 6mm T-Yoke + 6mm Washer, Sensitivity: 85.5dB, Sealed Enclosure Volume: 0.5 – 1.3 Cubic Feet, Vented/Ported Enclosure Volume: 0.9 – 1.6 Cubic Feet, Weight: 7.8 Lbs., Shipping Weight: 9.3 Lbs., Shipping Box Dimensions: 11.42x 11.42 x 8.26 Inches
• Detailed Info: Body: Non-Pressed Paper, Gap Plate Inside Diameter: 70mm (2.75 inches), Gap Plate Outside Diameter: 140mm (5.51 inches), Gap Plate Thickness: 25mm (0.98 inches), Yoke Outside Diameter: 130mm (5.11 inches), Yoke Thickness: 6mm (0.23 inches), Yoke Pole Diameter: 50mm (2 inches)

User questions & answers

Question:	Could i use this sub to replace a blown sub in the rockville rvb10.1a box with amp built in
Answer:	It should work
Question:	I have recently inherited 2 jbl jrx100, these boxes are supposed to have 2 15inch speakers in them. Can this replace 1 of the jbl’s
Answer:	Only if the original speakers were 2 ohm speakers.
Question:	What size amp would i need to run
Answer:	You are only limited by how much is too much not the minimum. Obviously more watts is better but only up to 400 watts continuous or 800 peak watts. There is no minimum watts. I have a 16 watt home stereo that drives a subwoofer just fine. Matching the ohms to the source is more important.
Question:	Have a 13 Jeep Wrangler does this connect to the factory stereo without any problems. I have the sub in the back but looking for additional punch
Answer:	I know this is too late, but this was an easy install in my Jeep using the factory stereo. It was an awesome addition to the Jeep, and is certainly a whole lot louder than a 6x9. Plus, you can tuck it under the seat or in the back in the rear tray. It wastes virtually no usable real estate.
Question:	Does this unit have good deep bass or more thump
Answer:	Good deep base.... although if I crank up the base on the device and adjust the radio in the car I get a little thumping.
Question:	I have 14' jeep wrangler 2dr. Will this kit fit under the seat? and do I need to get the amp to install this
Answer:	Yes we have installed many of these under the seat of the Wranglers at our retail stores. It comes with all the wringing you will need. Give us a call if you would like to bundle it with some new Kicker speaker as well. 800-854-5821 M-F 9a-5pm central
Question:	It shows the power cable and fuse does it really come with these wires or will I need an amp kit
Answer:	It comes with all that. No amp kit needed. Also no need for other extras... It has everything to hook up to your stock or aftermarket system.

Product features

Rockville K5 W10K5S2 10" 1200w 2 Ohm Car Audio Subwoofer Sub 300w RMS CEA Rated!

Product description

Finalized terminal spacing, basket color, venting, cast aluminum surround clamp rings, etc. After about a year of work I think the U series maybe ready to start production soon. Stay tuned for more updates! This will be our new series to bridge the gap from the SA to the X v.2 series -- it is also the most direct replacement for the discontinued Z v.3 series but at a much lower price. They use the same voice coil as the X v.2 series; therefore RMS power is 1500-watts rated conservatively. The motor is a similar design to the X v.2 series with one less magnet slug since it isn't needed for use on these frames & soft parts. It also retains a magnet ID shorting ring just like the X v.2 series motor. I have tooled 4 new cone bodies & surrounds to mate up to an entirely different frame tooling from the 1st prototypes. These surrounds are based on the Z v.3 18" surround geometry as this has been our go-to cone for SPL (we use those cones in our Terra for our World Record in SS 3-4 class). We also have tooled the cones to support the same wide-flange dust caps we use on all the new platform drivers. They also feature custom tooled cast aluminum vent spacers to mate up correctly to these frames. We tooled 2 different spacers for this line. Another new feature (also fully custom tooled) is the cast aluminum surround bolt-on ring. We tooled one for each size U series. These woofers will have a similar sound to the Z v.3 series -- meaning they do not have the "new platform" sound of the X, Z, NS, etc.

• Specifications: DC Resistance (Re): 6.1 Ω | Resonance Frequency (Fs): 41.1 Hz | Equivalent Volume (Vas): 11.5 L | Electrical Q Factor (Qes): 0.39 | Mechanical Q Factor (Qms): 3.21 | Total Q Factor (Qts): 0.35 | Force Factor (BL): 29.7 NA | Moving Mass (incl. Air Load) (Mms): 219.7 g | Suspension Compliance (Cms): 0.07 mm/N | Sensitivity: 84.9 dB 1w / 1m
• Box Recommendations: Sealed Enclosure Suggestion: 0.5 cu. ft. | Ported Enclosure Suggestion: 1.0 cu. ft. | Displacement: 0.21 cu. ft. | Depth: 7.007 in |Outside Diameter: 10.94 in | Cutout: 9.17 in | Recommended Tuning: 32 Hz | Recommended Port Area: 16 sq. in.

User questions & answers

Question:	What amp works best for two of these
Answer:	You can run an SFB-3000d or a SALT-4, two different price ranges, but both great options
Question:	year warranty
Answer:	2 year warranty!
Question:	Which sundown amp would be best for this sub
Answer:	Hey Matt, grab an SFB-3000d. You can run it at 2 ohms and it’ll push the sub perfectly!
Question:	Sub is about 7" , how much room to leave behind the sub in a single sealed box
Answer:	Try to leave an inch or more

Product description

Need bass but don't have a lot of space? How about more power handling than your average shallow subwoofer? Well, the T1 "Slimline" subwoofers are not your average shallow, in fact, they have been painstakingly designed to near exact performance characteristics of traditional sized Power T1 subwoofers you're already familiar with. We're calling these "slim" subwoofers because they don't take a lot of depth and offer bass response similar to a traditional sized model. How can this be true? Well, let's just say the Wizards-of-Fos engineered an ingenious slotted voice coil assembly that exhibits long excursion travel. Don't worry, you don't need to understand it, you just have to listen to how awesome they sound!

• The Power T1S1-10 is a slimline 10" subwoofer, designed for spaces where traditional sized woofers will not fit, but delivers full size bass
• The Power Series T1S1-10 is a 1-Ohm subwoofer with power handling rated at 500 Watts RMS/1000 Watts Max
• Our patented voice coil and motor structure assembly allows the woofer to fit into tight spaces without compromising output
• Extreme flexibility for extreme installations with a mounting depth of 3.0”
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

• Feel the Power of the clean and high tech T1D210 black 10” subwoofer including grille and integral trim ring
• The Power Series T1D210 is a Dual 2-Ohm subwoofer with power handling rated at 600 Watts RMS/1200 Watts Max
• These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D210 performs like a much larger woofer
• Extreme flexibility for extreme installations with a mounting depth of 6.6”
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
• 10-inch, 2-ohm, dual-voice-coil subwoofer with 1200 watts maximum power handling (600 watts RMS)
• Precision cast and vented aluminum alloy basket with high-excursion TPE surround

User questions & answers

Question:	Hey guys I have a 2014 Chevy Silverado Crew Cab and wanted to know if this subwoofer needs to be a in closed box or not thanks
Answer:	Hello hi yes it needs a sealed box or vented box
Question:	What kind of box and what size will you recommend for this sub? I'm getting a
Answer:	The instruction manual content indicate the size requirement.

Product features

Engineered to Deliver High Output Bass

The T1D210 Dual 2-Ohm 10” subwoofer is part of Rockford Fosgate's Power series that has always been known for class leading performance, power handling, and extreme output capabilities. Built with the highest grade of materials and components available, the T1 subwoofers are designed for those customers who want not only the best products, but the best sound possible from their audio system.

The Power T1D210 subwoofer features dual 2-Ohm voice coils and rocks 600 Watts of RMS power. These bad boys have Rockford Fosgate's patented VAST technology that increases surface cone area up to 25% so it performs like a much larger woofer.

Complicated voice coil wiring is a thing of the past because now you can simply select your impedance and plug it in. The SWIFT terminal design simplifies installation by simply rotating the terminal for either a series or parallel final configuration.

This Bass Beast is full of innovative technologies. Delivering performance and output in higher power applications, the T1D210 is clean, high tech and ready to set off car alarms!

Flex Fit

The slot mounted frame pattern of the Flex Fit basket utilizes slots instead of single screw sized holes to allow for variable adjustment to the mounting position. This provides extreme flexibility for extreme installations

Kevlar Cone & VAST

The Kevlar reinforced cone give the T1 the strength to stand up to any bass beat you give it. The custom surround is designed to maximize the excursion while the VAST technology increases the speakers effective radiating cone area by 25%

IDHS Technology

The IDHS technology adds additional heat sinking ability above the motor structure drawing more heat away from the voice coil. This not only improves its efficiency, but also its power handling, allowing the woofer to play louder and longer

SWIFT Terminals

The integrated Subwoofer Impedance Fused Terminal (SWIFT) allows you to quickly configure the final impedance of the subwoofer’s dual voice coils without special wiring. Simply rotate the terminal for either a series or parallel final configuration

Product description

The success of the original Nanoboxx led us to produce an all weather version capable of withstanding the rigors of marine and powersports use. The MXA110SPD Xtreme Nanoboxx is water and element resistant and features a sealed panel to prevent damage to the controls. The chassis is ultra-durable anodized aluminum which is rugged enough for rough terrain and is vibration tested to ensure the mounting hardware is up for whatever you throw at it. The Xtreme Nanoboxx elevates any standard system to a rich full sounding experience courtesy of the on board 10" subwoofer and passive radiator which enhanced the bass output to larger than life levels. Bring your boat or side-by-side audio to life with this all in one simple powered bass solution. Features: Ultra-compact design Oversized passive radiator cone Black anodized extruded aluminum enclosure Remote level control Efficient class -D amplifier built into the unit 0-12dB bass boost Low pass and subsonic filter Trail vibration tested for off-road use Marine grade construction - resists elements & water Recommended amp kit MXA8GKIT Specifications: Subwoofer Size 10" RMS Power (w) 200 Peak Power (w) 400 Mounting Depth (in) 3.5" Dimensions (in) 13.9 x 9.8 x 3.3

• MXA110SPD - Memphis Marine 10" 200W RMS Enclosed Subwoofer
• Built-in Class D amplifier (200 watts RMS/400 watts peak)
• 10" marine-rated woofer
• Bass boost control (0 to +12 dB)
• Dimensions: 9-13/16"W x 3-5/16"H x 13-15/16"D

User questions & answers

Question:	Can this be sealed or ported
Answer:	Ported if you want it loud, like almost twice as loud. I love it!
Question:	What is the rms?? And does it have to be ported or sealed
Answer:	Ported, Nearly 900 watts RMS of clean signal, it bumps...

Product description

MBP10AM 10" BassPro Amplified Marine Subwoofer Enclosure 1) Self-enclosed powered subwoofer system JBL Marine BassPro 10-inch powered subwoofer is ready to take on your next outdoor adventure. These fully marinized subwoofers deliver high-quality JBL sound. Engineered to withstand sun salt sea spray and wash downs they feature a sealed motor structure UV-resistant one-piece cast-polymer baskets a sealed magnet and rubber surrounds. The polypropyelene cone and butyl surround provide great bass and lots of output to ensure every note can be heard loud and clear. One Model to Suit All Applications and Environments MBP10 - 10" (250mm) marine audio 250W powered subwoofer system. IPX5 Rated Marine-grade materials and components to suit the demands of a harsh environment with an IPX5 marine rating. Cosmetic Appeal Product family look and feel to meet the needs of JBL's customers. Outdoor Performance Accentuated performance at frequencies heard in an open-air environment. Product Value Great performance at an affordable price point. Big Dynamic Power The JBL MBP10 has an output of 250 watts RMS and a peak power output of 750 watts. Enough to fill the fresh open air with great sound. Designed for the Elements The one-piece polymer basket is designed to stand the test of time even after long exposure to the sun and salt. Rubber surrounds offer superior edge protection and are much more reliable than foam. And a grille-mounted crossover allows for accessible adjustment to controls after the subwoofer in installed. Engineered for Harsh Marine Conditions With a marinized circuit board stainless steel hardware and all the right waterproofing the MBP10 is like all JBL marine audio products built to survive salt water corrosion and other risks - while showing you a great time on the open seas. Tuning Options for Systems of Any Size The JBL MBP10 has a built-in 12dB electronic crossover that provides adj

• IPx5 Rated: Marine-grade materials and components to suit the demands of a harsh outdoor environment
• One Model to Suit All Applications and Environments
• Accentuated performance at frequencies heard in an open-air environment.

User questions & answers

Question:	Is there a power on/off signal wire on the amp that goes to the source
Answer:	Yes
Question:	is it rca in put
Answer:	Yes it is .

Product description

Give your JKU a bass boost with the SBV-10-WRA. This 10-inch subwoofer is pre-loaded into a sealed enclosure that is designed to fit under the front passenger’s seat of the 2007-2018 JKU. The enclosure’s specialized shape ensures a snug fit under the seat frame without the use of any mounting hardware. Mounting the subwoofer under the seat lets the SBV-10-WRA load the lower frequency sound into the passenger’s foot well to deliver quality sound and maximized bass extension, even when the Wrangler’s top is off. In addition, the SBV-10WRA’s location does not take up usable space in the Wrangler. The 10-inch subwoofer delivers bass you can count on when tackling rugged terrain. With a power handling of 300W RMS/900W Peak (CTA-2031 compliant), the SBV-10-WRA gives you dependable, well-rounded bass performance. Driving with the top off is part of the fun of owning an Wrangler, but sometimes you get caught off-guard in inclement weather. Not to worry. The SBV-10-WRA is weather resistant and rugged, rated at IP66 so it’s protected from total dust ingress and water from any direction. The subwoofer uses an OEM-grade Molex connector to provide a secure, high-quality connection that’s also protected from inclement weather. For professional installation, visit the store locator on the Alpine USA website to find an authorized Alpine retailer near you.

• The SBV-10-WRA is a 10-inch subwoofer pre-loaded into a sealed enclosure designed to fit under the front passenger’s seat of the 2007-2018 JKU.
• The lower frequency sound loads into the passenger’s foot well to deliver quality sound and maximized bass extension even when the Wrangler’s top is off.
• The subwoofer’s power handling of 300W RMS/900W Peak delivers dependable, well-rounded bass performance.
• The SBV-10-WRA is weather resistant and rugged, rated at IP66 so it’s protected from total dust ingress and water from any direction.
• The SBV-10-WRA is an Authorized Online Product, visit the store locator on the Alpine USA website for professional installation.

User questions & answers

Question:	will this fit on a 2018 Jeep Wrangler JK 2 door
Answer:	It is sold as one. Bike tires are not sold in pairs, the back tire wares out twice as fast. On mountain bikes and sometimes on road bikes people run different tires on the front and back. This is a good price, tires are typically $40-$80 (for one).
Question:	Will this fit in a 2018 JL
Answer:	The tire says Krest FPS Flat Protection Series on the sidewall but doesnt indicate which series. I purchased these little over a year ago to replace city tires on Trek hardtail to ride on gravel or dirt trails or paved with mud or wet leaves. They work fine for that application. Not too noisy. Rolling resistance seems acceptable. You would probably need to check with seller regarding the series, or LBS. I usually try to support local bike shops but these werent available and the online price was good. That being said these tires are fine for me but if I was doing more aggressive riding I would be sure to get the better tire, whichever series that is.
Question:	Will this fit in a 2018 jeep wrangler jl
Answer:	Yes, I'm running them tubeless both front and back, they just take a little more time and effort to seal properly when brand new.
Question:	Does having the sub under the seat restrict the seat from folding down
Answer:	Not to sure of this question, but I did put two sets of these tires on two of my mountain bikes. Love them for training. I have seen a few of these on 700c rims (road bikes), they tend to give a smoother ride.