10 best american bass american bass preamps

Product description

American Bass 5 Band Equalizer with Built in Voltmeter Digital Display AB-5B-ECV This listing includes: AB-5B-ECV 5 Band Equalizer Mounting Accesories User's Manual Features: Active gain Pre-Amp with Adjustable Input Sensitivity Master Volume Control with up to 8 Volts RMS of Output Individual Left and Right Sensitivity Controls Five Band Pre-Amplifier with 12dB Boost/Cut Three Stereo RCA Output to Drive Front, Rear, and Subwoofer Audio Amplifier Subwoofer Level Control Subwoofer Frequency Adjustable Input AUX / DVD Select Switch Night Illumination Design Specifications: Power Supply: 11-15V DC Neg. Ground Max. Output Voltage: 8V RMS Pre Graphic Frequency: 50Hz, 120Hz, 900Hz, 2.2KHz, 16KHz Equalization Range: 12dB Subwoofer Frequency: 10Hz-300Hz Input Impedance: 10K Ohms S/N Ratio: 90 dB T.H.D.: 0.05% Channel Separation: 82 dB / 1 kHz Frequency Response: 10Hz-50KHz (-3dB)

• American Bass 5 Band Equalizer with Built in Voltmeter Digital Display AB-5B-ECV This listing includes: AB-5B-ECV 5 Band Equalizer Mounting Accesories User's Manual
• Features: Active gain Pre-Amp with Adjustable Input Sensitivity Master Volume Control with up to 8 Volts RMS of Output Individual Left and Right Sensitivity Controls Five Band Pre-Amplifier with 12dB Boost/Cut
• Three Stereo RCA Output to Drive Front, Rear, and Subwoofer Audio Amplifier Subwoofer Level Control Subwoofer Frequency Adjustable Input AUX / DVD Select Switch Night Illumination Design
• Specifications: Power Supply: 11-15V DC Neg. Ground Max. Output Voltage: 8V RMS Pre Graphic Frequency: 50Hz, 120Hz, 900Hz, 2.2KHz, 16KHz Equalization Range: 12dB Subwoofer Frequency: 10Hz-300Hz Input Impedance: 10K Ohms S/N Ratio: 90 dB T.H.D.: 0.05% Channel Separation: 82 dB / 1 kHz
• Frequency Response: 10Hz-50KHz (-3dB)

Product description

7-Band Parametric Pre-Amplifier With Digital Display. Max Output Voltage: 7v Rms. Pre Graphic Frequency: 50hz, 125hz, 315hz, 750hz, 2.2khz, 6khz, 12khz. Equalization Range: +- 12db. Subwoofer Frequency: 30hz-300hz. Input Impedance: 15k Ohms. S/N Ratio: 90db. THD: .05%. Channel Separation: 70db. FREQ. RESP.: 10Hz-50khz.

• Frequency Steps: 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 12KHz.
• 7 V Preamp Output. 2 RCA Inputs. Fader Control.
• Sub Frequency (30-300Hz) and Volume Control.
• Dimension: 9"Lx 8"Wx 2"H.

User questions & answers

Question:	What color does it light up
Answer:	Blue
Question:	Does the sub control work independently
Answer:	Yes it does
Question:	Would this be good with a home system? I am looking to control the 10 speakers in my restaurant, So I can turn down certain sections
Answer:	Not for home..... car audio only
Question:	I have amplifiers... a mono for the sub and a four channel for my cabin speakers. Can i use this eq with the amps
Answer:	yes you can I have a similar set up with for amps and I use this equalizer and it's very good

Product description

BOSS Audio Systems BX55 2 3 Way Pre-Amp Car Electronic Crossover with Remote Subwoofer Control

• Front / Rear / Sub Input, Front / Rear / Sub Outputs, Remote Subwoofer Control
• Front High Pass Filter 65Hz to 4.5 kHz, Rear High Pass Filter 65Hz to 4.5 kHz
• Variable Subwoofer Filter 40 Hz – 4200 Hz, Variable High Pass Filter 65 Hz – 4.5 kHz
• Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees
• Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz
• Maximum Input Voltage 4.5 Volts, Maximum Output Voltage 9 Volts, S / N Ratio 110 dB, THD 0.010
• Dimensions: Depth 6.5” x Width 8.8” x Height 1.5”
• 1 Year Warranty

User questions & answers

Question:	How many volts are the outputs? I have 8v outputs and id rather use my amps built in crossovers if this is going to reduce the voltage
Answer:	I am not sure. But... I am using two of these to drive one 4 channel amp, two 2 channel amps and 2 monoblock amps. All of them are different brands and none of my crossover outputs nor my amplifier inputs are at max. So in conclusion, it/they have enough.
Question:	how many amps can work with this cross over
Answer:	You can control three amps with this cross over.
Question:	Can I used this together with an equilizer for better sound on my car
Answer:	Yes will sound great
Question:	so if i got Boss amps will i need a Boss crossover
Answer:	Not really unless you want to keep all the equipment the same.

Product description

The EQS755 is 1/2-DIN chassis Graphic EQ w/ built-in low-pass filter. Equipped with a full-featured 7-band Graphic equalizer, you will enjoy superior control over the audio spectrum with frequency adjustments in the 50 Hz to 16 kHz range over seven bands. This gives you the power to get the most of your sound system, and the ability to contour the sound output to your musical taste.

• 1/2-DIN chassis graphic equalizer with built-in low-pass filter6-channel/ 8-Volt RCA outputs (front, rear and subwoofer)7-ban graphic equalizer (50Hz, 125Hz, 315Hz, 750Hz, 2.2Khz, 6Khz, 16Khz)
• 3.5mm Front aux input2-channel RCA aux input with variable gain adjustments and high level speaker inputs
• Blue illuminationindependent master volume and subwoofer level Control with fader control select able 12Db low-pass Filer (60Hz or 90Hz)
• Ground loop isolation circuit Dimensions: 7"(w)x4-1/4"(l)x1"(h)

User questions & answers

Question:	What size are the screws
Answer:	Do not know. But it is well made and probably not need of repair for a long while to come.
Question:	Can you hook this up to subwoofer and door speakers? Got 3000watt ssl evo amp and 2500watt audiotek for doors. Please help
Answer:	Yes ,I guess so
Question:	does this amp remove distorcion and make speakers louder
Answer:	Yes it's a 2 channel equalizer
Question:	Does this double as a line converter for factory sterols without RCA outputs
Answer:	I ordered these twice and got 5 pieces with each order

Product description

As Heard on Fender American Vintage Precision Bass guitars An accurate reproduction of the 1962 Precision Bass pickup, this split-coil humbucking pickup delivers powerful bass and clear high-end.

• Enamel-coated magnet wire for warm vintage tone
• Flush-mount pole pieces for even string response
• Alnico 5 magnets for more focus and enhanced dynamics
• Period-correct cloth output wire and fiber bobbin
• Installation hardware included
• 1 year Warranty Included

User questions & answers

Question:	Will these fit my 1974 P-bass
Answer:	They should. They fit the standard p bass route.
Question:	Can someone describe the difference in sound of the four pickup options here? (ie more/less thump, low-mids, hi-mids, etc) Thanks
Answer:	low-mids
Question:	are the original vintage ones made in the U.S? i am really scared of buying these and the end up being the same ones on my mim p bass
Answer:	Made in the USA!
Question:	Can some one showme in a youtube video or audio the sound of these pickups? Thanks
Answer:	Hi,Here you go. https://www.youtube.com/watch?v=tMuBGw-B4mU

Product description

Skar Audio engineered the SKA7EQ 7 band 1/2 DIN car audio graphic equalizer so that you can finally take full control over your car audio listening experience, dialing the sound into perfection. Featuring two sets of RCA inputs (main and a selectable auxiliary input), this EQ takes your input signal and allows you to modify and adjust the sound to your liking. The output signal is then delivered via the high voltage (up to 7V max) pre-amp RCA outputs for the Front, Rear, and Subwoofer channels (the subwoofer out-put channel features an independent volume control knob on the front of the unit as well). 7 fully adjustable -12 dB to +12 dB EQ bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with built-in fader control.

• 6 Channel 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer
• Featuring 2 (Balanced & Selectable) RCA Inputs - Main and Auxiliary (Aux w/ Variable Gain Control) | THD: 0. 005%
• High Voltage (Max Output Voltage - 7V) Gold Plated Pre-Amp RCA Outputs - Front, Rear, and Subwoofer (with Variable Subwoofer Level Control on Front of EQ)
• 7 Fully Adjustable -12 dB to +12 dB EQ Bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with Built-in Fader Control
• Take Full Control Over Your Car Audio System with this EQ | Signal-to-Noise Ratio: 100 dB, Low Pass Frequency Switch: 60 Hz / 120 Hz
• Includes Installation Mounting Brackets and Hardware | 20 dB Headroom Eliminated Signal Overload
• Included components: Installation Brackets and Hardware

User questions & answers

Question:	How would you wire this to a head unit that has a front, rear and subwoofer channel? Would you only use the front and rear and toss the other set of r
Answer:	So with only one input from the head unit does the eq convert it to front and rear sound? What I mean do you loose the rear sound or does it just double and split the front channel?
Question:	Does this product light up
Answer:	Yes it lights up blue cleaned up my audio very well
Question:	Anyone els experiencing a popping noise when you take key out ignition if so any ideas on how i can stop it? I already tried grounding it to radio
Answer:	Had the same issue with ankther brand EQ. Problem went away when I switched the positive from the EQ and attached it to the yellow cable straight to battery not the red to ignition. That should fix it.
Question:	How would you do the power wire i see theres one in picture with a fuse but isint that to short
Answer:	Hello, No the Red wire with fuse holder is not to short. The longer side of the Red wire goes to the Scar SKA7EQ, On Back of the SKA7EQ is the power, ground, and Remote terminal. The Red wire will be extended with a 14awg wire to your power source. Source could be the car battery, or an Accessory fuse circuit of 10 amps 12volts DC current. Extending this red wire is Normal in the audio installation world. The coupling will be needed to successfully butt the two wires together and crimp both sides, if u like install the double red wire size with Heat Shrink Tubbing, then Couple the wires with the "Butt Connector" , slide the heat shrink over it and heat the heat shrink with a Heat Gun, or powerfully hair dryer, then run the Red wire to the Accessory, or Battery positive Red Terminal. The same thing for the ground wire, black wire has no fuse in line so Run from your battery Negative Terminal Black, to the Scar SKA7EQ next to the Red wire, and Tighten it down to the SKA7EQ. The Remote wire is "In the business of Audio Installation" Traditionally Blue, Or Purple, Strip 4mm, or 3/8" and Install it into the Scar SKA7EQ at the R terminal, R stands for "Remote" or "Trigger" this Blue, Or Purple wire goes to your amplifier, and at the amplifier you will see a Positive terminal, a Negative Terminal and the R, "Remote" terminal the Blue or Purple Remote wire tightens onto the amp in the R terminal spot. The wire should be all 14 AWG for this. Wiring your amps u should at least use 4awg for both Power and Ground, Directly to the car/boat/atv Battery. Use small spools of OFC Copper, Red Positive, Black Negative, and Blue/Purple Remote from amazon, You have to have Amplifiers in your system to use the SKA7EQ. Get an Amplifier install kit, plus the three spools of 20ft of 14 AWG Red, Black, Blue from amazon....Good Luck.

Product description

Description of PPA50: Top quality low noise preamp: The main job of a pre-amp is to control the signal going to your amp or powered speakers. They are the first part of your signal and a good pre-amp is essential to having great sound quality. Having a separate pre-amp that specializes in that one job will give you better sound quality than an all in one receiver or integrated amplifier. Inputs and Outputs: What makes our model different from some of the standard ones on the market is that we carefully chose the inputs and outputs. We have RCA aux inputs that will support any audio device. We also have a Phono RCA to support turntables. There are ¼” inputs that can be run in stereo for any pro audio devices. There is also a front combo jack with selectable mic/line. The mic preamp is extremely low noise. Recording interface: Yea, we did it. We added a USB computer interface! Yes, this will work with any of your favorite DAW’s such as pro tools or Ableton live. You can record the final mix into one stereo channel in pro tools or any other DAW. Anything being played through the pre-amp will be recorded including the microphone inputs, as well as any source you are playing. It will be summed to one stereo channel in your DAW. You can also use Ableton live or any other software to play music as an input device on the preamp. The interface is 2-way and you can use it as an input playback device or as an output recording device. Bluetooth and USB playback: We wanted to make this product extremely versatile, so we added Bluetooth audio playback. This is perfect for home audio use as well as for some pro audio applications in between sets etc. There is also USB playback so you can play back audio saved on a thumb drive. Amazing controls: There is a high quality 3 band EQ so you can adjust and fine tune your sound. There are bass, mid, and treble controls. Also, we added a low-cut crossover which is great if you will be using a subwoofer.

• Features of PPA50: Rockville PPA50 Preamp Pro 1U Rack Pre-Amplifier w/Bluetooth/USB/PC Interface, Top of the line professional preamp with low noise and high sound quality, Built in reliable Bluetooth audio playback with long range, Built in USB/computer interface allows you to record the master output to your DAW or to play songs from your favorite software on your computer, Built in USB MP3 player, RCA aux inputs, RCA Phono Input, XLR and ¼” Combo jack front mic/line input.
• ¼” Inputs (mono or stereo), XLR outputs (stereo or mono), 1U rack mount size, Built-in 3 band Equalizer (bass, mid, treble), Left / Right balance adjustment, Mono/Stereo selectable, Mute, Low cut crossover filter, Headphone output for listening or monitoring, Loudness compensation circuit which at low-to-medium volume boosts the bass and treble response, 100-240V worldwide voltage power adaptor.
• Specifications of PPA50: Impedance: Mic: 1mV / 3 Kohms, Phono: 3mV / 47 Kohms, Pre-Output: max. 11V / 1 Kohms, Total Harmonic Distortation: Mic: less than 0. 02%, Phono: less than 0. 04%, RCA Aux: less than 0. 01%.
• Signal to Noise Ratio: Mic: more than 70 dB, Phono: more than 90 dB, RCA Aux: more than 100 dB, General: Product weight: 4. 43 lbs, Product dimensions: 18. 89" x 6. 49" x 1. 73".

User questions & answers

Question:	Is the hissing noise i read about in reviews a common experience for those who bought the ppa
Answer:	While this is a "budget" preamp more geared to sound reinforcement than high-end Hi-Fi, it does a fine job in most categories as long as you feed it an adequate level of signal input. I have not used the phono section so I cannot speak to that. However, the line level inputs, mic input, mp3 Bluetooth and mp3 USB Thumb Drive all work well without a distracting noise level. If you try to use a low-level input signal that causes you to turn the appropriate gain control or Master Volume control up full then you can expect a modest amount of hiss that will be heard during low or silent passages. For example, don't try using a low-output "ribbon" microphone and expect good performance without a separate microphone preamp ahead of this unit. Over all, I find these preamps quite usable. I own 4 of these units and they all have worked well and identically for my applications.
Question:	Bluetooth
Answer:	No, and I don't own this anymore because it arrived broken, bent and was junk. Returned it.
Question:	Can this be used with a Rockville tube amplifier
Answer:	I don't see why not!
Question:	Hows the Bluetooth on it? Does it have bluetooth
Answer:	It does have Bluetooth. Decent product however more for home studio use. I’d gave it a B-

Product features

Rockville PPA50 Preamp Pro 1U Pre-Amplifier w/Bluetooth/USB/Computer Interface

Description:

Top quality low noise preamp The main job of a pre-amp is to control the signal going to your amp or powered speakers. They are the first part of your signal and a good pre-amp is essential to having great sound quality. Having a separate pre-amp that specializes in that one job will give you better sound quality than an all in one receiver or integrated amplifier.

Inputs and Outputs What makes our model different from some of the standard ones on the market is that we carefully chose the inputs and outputs. We have RCA aux inputs that will support any audio device. We also have a Phono RCA to support turntables. There are ¼” inputs that can be run in stereo for any pro audio devices. There is also a front combo jack with selectable mic/line. The mic preamp is extremely low noise.

Recording interface Yea, we did it. We added a USB computer interface! Yes, this will work with any of your favorite DAW’s such as pro tools or Ableton live. You can record the final mix into one stereo channel in pro tools or any other DAW. Anything being played through the pre-amp will be recorded including the microphone inputs, as well as any source you are playing. It will be summed to one stereo channel in your DAW. You can also use Ableton live or any other software to play music as an input device on the preamp. The interface is 2-way and you can use it as an input playback device or as an output recording device.

Bluetooth and USB playback We wanted to make this product extremely versatile, so we added Bluetooth audio playback. This is perfect for home audio use as well as for some pro audio applications in between sets etc. There is also USB playback so you can play back audio saved on a thumb drive.

Amazing controls There is a high quality 3 band EQ so you can adjust and fine tune your sound. There are bass, mid, and treble controls. Also,we added a low-cut crossover which is great if you will be using a subwoofer so that you can cut some lows out of your main speakers. The mic/line input on the front has its own volume control and can be used at the same time as any of the other sources like Bluetooth or RCA.

Product description

The Epicenter Processors

The centerpiece of many champion sound installation systems. A patented process digitally maximizes the ultra-low bass on all types of source material. The Epicenter detects bass harmonics, then digitally recreates the underlying fundamental for the incredible punch and impact of live music.

The Epicenter Concert Series - Digital Bass Restoration Processor

Your MP3 player thinks your car stereo is a pair of headphones, so it removes the bass! The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave.

Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard.

Product highlights:

Bass Restoration Processor

Patented Bass Maximizer

Increases Bass Response from Your System

2-Channel Preamp Inputs and Outputs

Para-Bass Controls Adjust Center-Frequency and Width of Bass Processing

Fixed Subsonic Filter (33 Hz, 12/dB octave)

Wired Dash-Mount Bass Remote

8"W x 6-1/2"H x 1-3/16"D

Frequency Response: 10 to 100,000 Hz

Weight: 1.7 pounds

Warranty: 5 years

What's in the box:

The Epicenter by AudioControl Pre-amp Bass Restoration Processor (White)

Owner's Manual

ACR-1 Remote Level Control Included

20' RJ-14 Cable

Owner's Manual

QC Checklist

• Bass Restoration Processor (Black), Included ACR-1 Remote Level Control & 20' RJ-14 Cable
• Patented Bass Maximizer - Increases Bass Response from Your System
• 2-Channel Preamp Inputs and Outputs
• Para-Bass Controls Adjust Center-Frequency and Width of Bass Processing
• Fixed Subsonic Filter (33 Hz, 12/dB octave)

User questions & answers

Question:	Does any one hook it up on stock 2din HU w/ mono and 4 chan amp? how does it sounds
Answer:	Should sound great, provided that your subs and amp can handle the demands.
Question:	can be used when daisy chaining amps
Answer:	My knowledge of the epicenter is that it only brings out hidden bass and deeper bass ol'skool songs 4sho , rock and some hip hop and r&b songs .but ALL sounds amazing when set right. "It's only enhance" bass
Question:	Could you hook up to stock radio for 2006 nissan titan
Answer:	Yes! You may need a adapter
Question:	How to hookup this to a system with a clarion 3 way crossover? Aux out going to crossover then splits out to mid and bass outputs
Answer:	here's how u hook i up ,from the subwoofer output from your headuint goes into the inputs of the epicenter and the outputs of the epicenter goes into the subwoofer inputs of the clarion crossover ,and you connect your mids and highs from your head unit straight to the inputs of the crossover got it?

• The JOYO Advantages: over 14 years of brand history, strong technical teams, many innovative patents, electroacoustic core technology, guide design of music masters, winning the love of global fans, inspiring people's music dreams.
• JF-14 American Sound reproduces the sound of 57 Deluxe amp, which performs well from original sound to overdrive sound.
• Together with the adjustment of DRIVE, the VOICE knob to adjust the frequency response and the distortion.
• Metal aluminum alloy case, high quality precision components, six knobs for flexible and free tuning.
• What You Get: JOYO JF-14 overdrive pedal, detailed operating instructions and excellent customer service.

User questions & answers

Question:	Where is this pedal best placed in a chain
Answer:	It did not sound good on my 15-year old, solid-state, Ibanez Wholeone 80w, 24" speaker, Jazz amp. But, that does not mean it is not any good. My amp solid-state amp does not like all pedals. And, I have also heard that pedals work best on tube amps, and you may have to turn up the volume loud to get the sound and tone you want. Don't give up yet, because, you can always try it, and if you do not like the tones, then send it back. Amazon is an excellent company to send items back with no hazels. Keep in mind that this pedal supposedly gets a big Fender "Tube Amp" sound from a little box. Will it really do that with your home amp? Only you can decide that with it connected to your equipment. Good luck! TG, from Orlando, Florida
Question:	Is the output signal strong enough to drive headphones or will i need a preamp or the monitor output on my usb interface
Answer:	This would technically "work", but not too loudly, and assuming your headphones are stereo, it would only produce sound in one ear unless you use a mono adapter on your headphone plug to make it mono in both ears. The headphones would also need to be lower Ohm to be even remotely usable -- like 32 Ohm. Out of curiosity, I actually just tried it with my 80 Ohm headphones, and got a little bit of sound out of the left side only. But the bottom line is that this isn't how the device is meant to be used (is more of a hack), and while you'd technically get sound out of it, the sound quality would be low with little headroom. The output is really meant for a mono instrument cable to some sort of power amp, like an actual guitar amp, PA system, or computer.
Question:	Is this based on the model of the complete amphead+cabinet or just the head
Answer:	Amp+cabinet
Question:	does the user manual has the explaination of all the knobs
Answer:	Yes, you can find in the attached user manual in the package. Thank you for the attention, we have many other interesting items, also welcome to visit.

Product features

JOYO JF-14 American Sound Guitar Effects Pedal

The great feature of this pedal is the fact that it has inbuilt cabinet emulation meaning you can go from the pedal directly to a mixing desk, a DAW or directly to your computer/laptop with a jack to usb lead. So this pedal is essentially a DI.

Classic sounds of the early 57 Deluxe Amps

This JOYO pedal has the smooth, subtle overdrive everyone expects from 57 Deluxe tube amps near full volume. When used as a clean boost you get more liquid / sonic gold. Compression and fatness that you usually don't hear from a pedal

Specifications

Input Impedance: 1MΩ

Output Impedance: 1KΩ

Running Current: 6mA

Power: 6F22 9V Battery/ DC 9V adapter (not inclued)

Dimension:120(L)×97(W)×55(H) mm

Weight:390g

Just with LOW, MID, HIGH, LEVEL, VOICE, DRIVE control knobs, adjust the frequency response and the distortion

• This pedal will also do the> cranked right up, that brilliant growling, saturated overdrive tweed sound.
• You can use it instead of an amp and it can save your gig if your amp fails, just put it at the end of all your other pedals and set it clean like your amp then just take the output from the American sound straight to the desk. Or by going direct into a DAW or even your laptop you can record direct from the pedal.
• When used as a clean boost you get more liquid / sonic gold. Compression and fatness that you usually don't hear from a pedal. while quality pots, jacks and components ensure that the sound it equally as impressive when you get going.